Merge drm/drm-next into drm-intel-next-queued

Some DSI and VBT pending patches from Hans will apply
cleanly and with less ugly conflicts if they are rebuilt
on top of other patches that recently landed on drm-next.

Reference: https://patchwork.freedesktop.org/series/70952/
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com

1 files changed, 18 insertions, 0 deletions

diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst
index e0a7c7af6525..1e4735cc0553 100644
--- a/Documentation/networking/phy.rst
+++ b/Documentation/networking/phy.rst
@@ -267,6 +267,24 @@ Some of the interface modes are described below:
     duplex, pause or other settings.  This is dependent on the MAC and/or
     PHY behaviour.
 
+``PHY_INTERFACE_MODE_10GBASER``
+    This is the IEEE 802.3 Clause 49 defined 10GBASE-R protocol used with
+    various different mediums. Please refer to the IEEE standard for a
+    definition of this.
+
+    Note: 10GBASE-R is just one protocol that can be used with XFI and SFI.
+    XFI and SFI permit multiple protocols over a single SERDES lane, and
+    also defines the electrical characteristics of the signals with a host
+    compliance board plugged into the host XFP/SFP connector. Therefore,
+    XFI and SFI are not PHY interface types in their own right.
+
+``PHY_INTERFACE_MODE_10GKR``
+    This is the IEEE 802.3 Clause 49 defined 10GBASE-R with Clause 73
+    autonegotiation. Please refer to the IEEE standard for further
+    information.
+
+    Note: due to legacy usage, some 10GBASE-R usage incorrectly makes
+    use of this definition.
 
 Pause frames / flow control
 ===========================