Merge tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "There are no big surprising changes in this cycle, yet not too boring,
  either. The biggest change from diffstat POV is the removal of the
  legacy OSS driver codes that have been already disabled for a long
  time. This will bring a few trivial merge conflicts.

  As new features in ASoC side, there are two things: a new AC97 bus
  implementation and AMD Stony platform support. Both include the
  relevant changes shared with other subsystems, e.g. AC97 MFD changes
  and DRM AMD changes.

  Some other highlighted topics are:

   - A bunch of USB-audio drivers got the hardening against the
     malicious device accesses with a new helper code for endpoint
     sanity check

   - Lots of cleanups for ASoC Intel platform code, including support
     for their open source audio firmware

   - Continued ASoC core componentization works

   - Support for scaling MCLK with sample rate in ASoC simple-card

   - Stabler PCM hot-unplug capability, especially for ASoC usages"

* tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (302 commits)
  Documentation: sound: hd-audio: notes.rst
  ASoC: bcm2835: Support left/right justified and DSP modes
  ASoC: bcm2835: Enforce full symmetry
  ASoC: bcm2835: Support additional samplerates up to 384kHz
  ASoC: bcm2835: Add support for TDM modes
  ASoC: add mclk-fs support to audio graph card
  ASoC: add mclk-fs to audio graph card binding
  ASoC: rt5514: work around link error
  ASoC: rt5514: mark PM functions as __maybe_unused
  ASoC: rt5663: Check the JD status in the button pushing
  ASoC: amd: Modified DMA transfer Mechanism for Playback
  ASoC: rt5645: Wait for 400msec before concluding on value of RT5645_VENDOR_ID2
  ASoC: sun4i-codec: fixed 32bit audio capture support for H3/H2+
  ASoC: da7213: add support for DSP modes
  ASoC: sun8i-codec: Add a comment on the LRCK inversion
  ASoC: sun8i-codec: Set the BCLK divider
  ASoC: rt5663: Delay and retry reading rt5663 ID register
  ASoC: amd: use do_div rather than 64 bit division to fix 32 bit builds
  ASoC: cs42l56: Fix reset GPIO name in example DT binding
  ASoC: rt5514-spi: check irq status to schedule data copy in resume function
  ...

1 files changed, 0 insertions, 101 deletions

diff --git a/Documentation/sound/oss/AudioExcelDSP16 b/Documentation/sound/oss/AudioExcelDSP16
deleted file mode 100644
index ea8549faede9..000000000000
--- a/Documentation/sound/oss/AudioExcelDSP16
+++ /dev/null
@@ -1,101 +0,0 @@
-Driver
-------
-
-Information about Audio Excel DSP 16 driver can be found in the source
-file aedsp16.c
-Please, read the head of the source before using it. It contain useful
-information.
-
-Configuration
--------------
-
-The Audio Excel configuration, is now done with the standard Linux setup.
-You have to configure the sound card (Sound Blaster or Microsoft Sound System)
-and, if you want it, the Roland MPU-401 (do not use the Sound Blaster MPU-401,
-SB-MPU401) in the main driver menu. Activate the lowlevel drivers then select
-the Audio Excel hardware that you want to initialize. Check the IRQ/DMA/MIRQ
-of the Audio Excel initialization: it must be the same as the SBPRO (or MSS)
-setup. If the parameters are different, correct it.
-I you own a Gallant's audio card based on SC-6600, activate the SC-6600 support.
-If you want to change the configuration of the sound board, be sure to
-check off all the configuration items before re-configure it.
-
-Module parameters
------------------
-To use this driver as a module, you must configure some module parameters, to
-set up I/O addresses, IRQ lines and DMA channels. Some parameters are
-mandatory while some others are optional. Here a list of parameters you can
-use with this module:
-
-Name		Description
-====		===========
-MANDATORY
-io		I/O base address (0x220 or 0x240)
-irq		irq line (5, 7, 9, 10 or 11)
-dma		dma channel (0, 1 or 3)
-
-OPTIONAL
-mss_base	I/O base address for activate MSS mode (default SBPRO)
-		(0x530 or 0xE80)
-mpu_base	I/O base address for activate MPU-401 mode
-		(0x300, 0x310, 0x320 or 0x330)
-mpu_irq		MPU-401 irq line (5, 7, 9, 10 or 0)
-
-A configuration file in /etc/modprobe.d/ directory will have lines like this:
-
-options opl3 io=0x388
-options ad1848 io=0x530 irq=11 dma=3
-options aedsp16 io=0x220 irq=11 dma=3 mss_base=0x530
-
-Where the aedsp16 options are the options for this driver while opl3 and
-ad1848 are the corresponding options for the MSS and OPL3 modules.
-
-Loading MSS and OPL3 needs to pre load the aedsp16 module to set up correctly
-the sound card. Installation dependencies must be written in configuration
-files under /etc/modprobe.d/ directory:
-
-softdep ad1848 pre: aedsp16
-softdep opl3 pre: aedsp16
-
-Then you must load the sound modules stack in this order:
-sound -> aedsp16 -> [ ad1848, opl3 ]
-
-With the above configuration, loading ad1848 or opl3 modules, will
-automatically load all the sound stack.
-
-Sound cards supported
----------------------
-This driver supports the SC-6000 and SC-6600 based Gallant's sound card.
-It don't support the Audio Excel DSP 16 III (try the SC-6600 code).
-I'm working on the III version of the card: if someone have useful
-information about it, please let me know.
-For all the non-supported audio cards, you have to boot MS-DOS (or WIN95)
-activating the audio card with the MS-DOS device driver, then you have to
-<ctrl>-<alt>-<del> and boot Linux.
-Follow these steps:
-
-1) Compile Linux kernel with standard sound driver, using the emulation
-   you want, with the parameters of your audio card,
-   e.g. Microsoft Sound System irq10 dma3
-2) Install your new kernel as the default boot kernel.
-3) Boot MS-DOS and configure the audio card with the boot time device
-   driver, for MSS irq10 dma3 in our example.
-4) <ctrl>-<alt>-<del> and boot Linux. This will maintain the DOS configuration
-   and will boot the new kernel with sound driver. The sound driver will find
-   the audio card and will recognize and attach it.
-
-Reports on User successes
--------------------------
-
-> Date: Mon, 29 Jul 1996 08:35:40 +0100
-> From: Mr S J Greenaway <sjg95@unixfe.rl.ac.uk>
-> To: riccardo@cdc8g5.cdc.polimi.it (Riccardo Facchetti)
-> Subject: Re: Audio Excel DSP 16 initialization code
->
-> Just to let you know got my Audio Excel (emulating a MSS) working
-> with my original SB16, thanks for the driver!
-
-
-Last revised: 20 August 1998
-Riccardo Facchetti
-fizban@tin.it