Merge tag 'media/v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - new framework support for HDMI CEC and remote control support

 - new encoding codec driver for Mediatek SoC

 - new frontend driver: helene tuner

 - added support for NetUp almost universal devices, with supports
   DVB-C/S/S2/T/T2 and ISDB-T

 - the mn88472 frontend driver got promoted from staging

 - a new driver for RCar video input

 - some soc_camera legacy drivers got removed: timb, omap1, mx2, mx3

 - lots of driver cleanups, improvements and fixups

* tag 'media/v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
  [media] cec: always check all_device_types and features
  [media] cec: poll should check if there is room in the tx queue
  [media] vivid: support monitor all mode
  [media] cec: fix test for unconfigured adapter in main message loop
  [media] cec: limit the size of the transmit queue
  [media] cec: zero unused msg part after msg->len
  [media] cec: don't set fh to NULL in CEC_TRANSMIT
  [media] cec: clear all status fields before transmit and always fill in sequence
  [media] cec: CEC_RECEIVE overwrote the timeout field
  [media] cxd2841er: Reading SNR for DVB-C added
  [media] cxd2841er: Reading BER and UCB for DVB-C added
  [media] cxd2841er: fix switch-case for DVB-C
  [media] cxd2841er: fix signal strength scale for ISDB-T
  [media] cxd2841er: adjust the dB scale for DVB-C
  [media] cxd2841er: provide signal strength for DVB-C
  [media] cxd2841er: fix BER report via DVBv5 stats API
  [media] mb86a20s: apply mask to val after checking for read failure
  [media] airspy: fix error logic during device register
  [media] s5p-cec/TODO: add TODO item
  [media] cec/TODO: drop comment about sphinx documentation
  ...

3 files changed, 32 insertions, 20 deletions

diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
index 85a8fdcfcdaa..c9b4959fd04e 100644
--- a/Documentation/video4linux/CARDLIST.cx23885
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -54,3 +54,4 @@
  53 -> Hauppauge WinTV Starburst                           [0070:c12a]
  54 -> ViewCast 260e                                       [1576:0260]
  55 -> ViewCast 460e                                       [1576:0460]
+ 56 -> Hauppauge WinTV-quadHD (DVB)               [0070:6a28,0070:6b28]
diff --git a/Documentation/video4linux/v4l2-controls.txt b/Documentation/video4linux/v4l2-controls.txt
index 5e759cab4538..f930b80e9111 100644
--- a/Documentation/video4linux/v4l2-controls.txt
+++ b/Documentation/video4linux/v4l2-controls.txt
@@ -96,21 +96,6 @@ Basic usage for V4L2 and sub-device drivers
 
   Where foo->sd is of type struct v4l2_subdev.
 
-  And set all core control ops in your struct v4l2_subdev_core_ops to these
-  helpers:
-
-	.queryctrl = v4l2_subdev_queryctrl,
-	.querymenu = v4l2_subdev_querymenu,
-	.g_ctrl = v4l2_subdev_g_ctrl,
-	.s_ctrl = v4l2_subdev_s_ctrl,
-	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
-	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
-	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
-
-  Note: this is a temporary solution only. Once all V4L2 drivers that depend
-  on subdev drivers are converted to the control framework these helpers will
-  no longer be needed.
-
 1.4) Clean up the handler at the end:
 
 	v4l2_ctrl_handler_free(&foo->ctrl_handler);
diff --git a/Documentation/video4linux/vivid.txt b/Documentation/video4linux/vivid.txt
index 8da5d2a576bc..1b26519c6ddc 100644
--- a/Documentation/video4linux/vivid.txt
+++ b/Documentation/video4linux/vivid.txt
@@ -74,7 +74,8 @@ Section 11: Cropping, Composing, Scaling
 Section 12: Formats
 Section 13: Capture Overlay
 Section 14: Output Overlay
-Section 15: Some Future Improvements
+Section 15: CEC (Consumer Electronics Control)
+Section 16: Some Future Improvements
 
 
 Section 1: Configuring the driver
@@ -364,7 +365,11 @@ For HDMI inputs it is possible to set the EDID. By default a simple EDID
 is provided. You can only set the EDID for HDMI inputs. Internally, however,
 the EDID is shared between all HDMI inputs.
 
-No interpretation is done of the EDID data.
+No interpretation is done of the EDID data with the exception of the
+physical address. See the CEC section for more details.
+
+There is a maximum of 15 HDMI inputs (if there are more, then they will be
+reduced to 15) since that's the limitation of the EDID physical address.
 
 
 Section 3: Video Output
@@ -409,6 +414,9 @@ standard, and for all others a 1:1 pixel aspect ratio is returned.
 
 An HDMI output has a valid EDID which can be obtained through VIDIOC_G_EDID.
 
+There is a maximum of 15 HDMI outputs (if there are more, then they will be
+reduced to 15) since that's the limitation of the EDID physical address. See
+also the CEC section for more details.
 
 Section 4: VBI Capture
 ----------------------
@@ -1108,7 +1116,26 @@ capabilities will slow down the video loop considerably as a lot of checks have
 to be done per pixel.
 
 
-Section 15: Some Future Improvements
+Section 15: CEC (Consumer Electronics Control)
+----------------------------------------------
+
+If there are HDMI inputs then a CEC adapter will be created that has
+the same number of input ports. This is the equivalent of e.g. a TV that
+has that number of inputs. Each HDMI output will also create a
+CEC adapter that is hooked up to the corresponding input port, or (if there
+are more outputs than inputs) is not hooked up at all. In other words,
+this is the equivalent of hooking up each output device to an input port of
+the TV. Any remaining output devices remain unconnected.
+
+The EDID that each output reads reports a unique CEC physical address that is
+based on the physical address of the EDID of the input. So if the EDID of the
+receiver has physical address A.B.0.0, then each output will see an EDID
+containing physical address A.B.C.0 where C is 1 to the number of inputs. If
+there are more outputs than inputs then the remaining outputs have a CEC adapter
+that is disabled and reports an invalid physical address.
+
+
+Section 16: Some Future Improvements
 ------------------------------------
 
 Just as a reminder and in no particular order:
@@ -1121,8 +1148,6 @@ Just as a reminder and in no particular order:
 - Fix sequence/field numbering when looping of video with alternate fields
 - Add support for V4L2_CID_BG_COLOR for video outputs
 - Add ARGB888 overlay support: better testing of the alpha channel
-- Add custom DV timings support
-- Add support for V4L2_DV_FL_REDUCED_FPS
 - Improve pixel aspect support in the tpg code by passing a real v4l2_fract
 - Use per-queue locks and/or per-device locks to improve throughput
 - Add support to loop from a specific output to a specific input across
@@ -1133,3 +1158,4 @@ Just as a reminder and in no particular order:
 - Make a thread for the RDS generation, that would help in particular for the
   "Controls" RDS Rx I/O Mode as the read-only RDS controls could be updated
   in real-time.
+- Changing the EDID should cause hotplug detect emulation to happen.