Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal

Pull thermal SoC updates from Eduardo Valentin:
 "Several new things coming up. Specifics:

   - Rework of tsens and hisi thermal drivers

   - OF-thermal now allows sharing multiple cooling devices on maps

   - Added support for r8a7744 and R8A77970 on rcar thermal driver

   - Added support for r8a774a1 on rcar_gen3 thermal driver

   - New thermal driver stm32

   - Fixes on multiple thermal drivers: of-thermal, imx, qoriq, armada,
     qcom-spmi, rcar, da9062/61"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (41 commits)
  thermal: da9062/61: Prevent hardware access during system suspend
  thermal: rcar_thermal: Prevent doing work after unbind
  thermal: rcar_thermal: Prevent hardware access during system suspend
  thermal: rcar_gen3_thermal: add R8A77980 support
  dt-bindings: thermal: rcar-gen3-thermal: document R8A77980 bindings
  thermal: add stm32 thermal driver
  dt-bindings: stm32-thermal: add binding documentation
  thermal: rcar_thermal: add R8A77970 support
  dt-bindings: thermal: rcar-thermal: document R8A77970 bindings
  thermal: rcar_thermal: fix duplicate IRQ request
  dt-bindings: thermal: rcar: Add device tree support for r8a7744
  thermal/drivers/hisi: Add the dual clusters sensors for hi3660
  thermal/drivers/hisi: Add more sensors channel
  thermal/drivers/hisi: Remove pointless irq field
  thermal/drivers/hisi: Use platform_get_irq_byname
  thermal/drivers/hisi: Replace macro name with relevant sensor location
  thermal/drivers/hisi: Add multiple sensors support
  thermal/drivers/hisi: Prepare to support multiple sensors
  thermal/drivers/hisi: Factor out the probe functions
  thermal/drivers/hisi: Set the thermal zone private data to the sensor pointer
  ...

6 files changed, 78 insertions, 18 deletions

diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
index 290ec06fa33a..0273a92a2a84 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
@@ -6,8 +6,7 @@ interrupt signal and status register to identify high PMIC die temperature.
 
 Required properties:
 - compatible:      Should contain "qcom,spmi-temp-alarm".
-- reg:             Specifies the SPMI address and length of the controller's
-                   registers.
+- reg:             Specifies the SPMI address.
 - interrupts:      PMIC temperature alarm interrupt.
 - #thermal-sensor-cells: Should be 0. See thermal.txt for a description.
 
@@ -20,7 +19,7 @@ Example:
 
 	pm8941_temp: thermal-alarm@2400 {
 		compatible = "qcom,spmi-temp-alarm";
-		reg = <0x2400 0x100>;
+		reg = <0x2400>;
 		interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
 		#thermal-sensor-cells = <0>;
 
@@ -36,19 +35,14 @@ Example:
 			thermal-sensors = <&pm8941_temp>;
 
 			trips {
-				passive {
-					temperature = <1050000>;
+				stage1 {
+					temperature = <105000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
-				alert {
+				stage2 {
 					temperature = <125000>;
 					hysteresis = <2000>;
-					type = "hot";
-				};
-				crit {
-					temperature = <145000>;
-					hysteresis = <2000>;
 					type = "critical";
 				};
 			};
diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
index 20ca4ef9d776..04cbb90a5d3e 100644
--- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
@@ -1,9 +1,9 @@
 * Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
 
 Required properties:
-- compatible : Must include "fsl,qoriq-tmu". The version of the device is
-	determined by the TMU IP Block Revision Register (IPBRR0) at
-	offset 0x0BF8.
+- compatible : Must include "fsl,qoriq-tmu" or "fsl,imx8mq-tmu". The
+	version of the device is determined by the TMU IP Block Revision
+	Register (IPBRR0) at offset 0x0BF8.
 	Table of correspondences between IPBRR0 values and example  chips:
 		Value           Device
 		----------      -----
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
index cfa154bb0fa7..ad9a435afef4 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
@@ -7,9 +7,11 @@ inside the LSI.
 Required properties:
 - compatible		: "renesas,<soctype>-thermal",
 			  Examples with soctypes are:
+			    - "renesas,r8a774a1-thermal" (RZ/G2M)
 			    - "renesas,r8a7795-thermal" (R-Car H3)
 			    - "renesas,r8a7796-thermal" (R-Car M3-W)
 			    - "renesas,r8a77965-thermal" (R-Car M3-N)
+			    - "renesas,r8a77980-thermal" (R-Car V3H)
 - reg			: Address ranges of the thermal registers. Each sensor
 			  needs one address range. Sorting must be done in
 			  increasing order according to datasheet, i.e.
@@ -19,7 +21,8 @@ Required properties:
 
 Optional properties:
 
-- interrupts           : interrupts routed to the TSC (3 for H3, M3-W and M3-N)
+- interrupts		: interrupts routed to the TSC (3 for H3, M3-W, M3-N,
+			  and V3H)
 - power-domain		: Must contain a reference to the power domain. This
 			  property is mandatory if the thermal sensor instance
 			  is part of a controllable power domain.
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
index 67c563f1b4c4..73e1613d2cb0 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
@@ -4,15 +4,17 @@ Required properties:
 - compatible		: "renesas,thermal-<soctype>",
 			   "renesas,rcar-gen2-thermal" (with thermal-zone) or
 			   "renesas,rcar-thermal" (without thermal-zone) as
-                           fallback except R-Car D3.
+                           fallback except R-Car V3M/D3.
 			  Examples with soctypes are:
 			    - "renesas,thermal-r8a73a4" (R-Mobile APE6)
 			    - "renesas,thermal-r8a7743" (RZ/G1M)
+			    - "renesas,thermal-r8a7744" (RZ/G1N)
 			    - "renesas,thermal-r8a7779" (R-Car H1)
 			    - "renesas,thermal-r8a7790" (R-Car H2)
 			    - "renesas,thermal-r8a7791" (R-Car M2-W)
 			    - "renesas,thermal-r8a7792" (R-Car V2H)
 			    - "renesas,thermal-r8a7793" (R-Car M2-N)
+			    - "renesas,thermal-r8a77970" (R-Car V3M)
 			    - "renesas,thermal-r8a77995" (R-Car D3)
 - reg			: Address range of the thermal registers.
 			  The 1st reg will be recognized as common register
@@ -21,7 +23,7 @@ Required properties:
 Option properties:
 
 - interrupts		: If present should contain 3 interrupts for
-                          R-Car D3 or 1 interrupt otherwise.
+                          R-Car V3M/D3 or 1 interrupt otherwise.
 
 Example (non interrupt support):
 
diff --git a/Documentation/devicetree/bindings/thermal/stm32-thermal.txt b/Documentation/devicetree/bindings/thermal/stm32-thermal.txt
new file mode 100644
index 000000000000..8c0d5a4d8031
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/stm32-thermal.txt
@@ -0,0 +1,61 @@
+Binding for Thermal Sensor for STMicroelectronics STM32 series of SoCs.
+
+On STM32 SoCs, the Digital Temperature Sensor (DTS) is in charge of managing an
+analog block which delivers a frequency depending on the internal SoC's
+temperature. By using a reference frequency, DTS is able to provide a sample
+number which can be translated into a temperature by the user.
+
+DTS provides interrupt notification mechanism by threshold. This mechanism
+offers two temperature trip points: passive and critical. The first is intended
+for passive cooling notification while the second is used for over-temperature
+reset.
+
+Required parameters:
+-------------------
+
+compatible: 	Should be "st,stm32-thermal"
+reg: 		This should be the physical base address and length of the
+		sensor's registers.
+clocks: 	Phandle of the clock used by the thermal sensor.
+		  See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+clock-names: 	Should be "pclk" for register access clock and reference clock.
+		  See: Documentation/devicetree/bindings/resource-names.txt
+#thermal-sensor-cells: Should be 0. See ./thermal.txt for a description.
+interrupts:	Standard way to define interrupt number.
+
+Example:
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu_alert1: cpu-alert1 {
+					temperature = <85000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu-crit: cpu-crit {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
+	thermal: thermal@50028000 {
+		compatible = "st,stm32-thermal";
+		reg = <0x50028000 0x100>;
+		clocks = <&rcc TMPSENS>;
+		clock-names = "pclk";
+		#thermal-sensor-cells = <0>;
+		interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+	};
diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt
index eb7ee91556a5..ca14ba959e0d 100644
--- a/Documentation/devicetree/bindings/thermal/thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/thermal.txt
@@ -152,7 +152,7 @@ Optional property:
   Elem size: one cell	the sensors listed in the thermal-sensors property.
   Elem type: signed	Coefficients defaults to 1, in case this property
 			is not specified. A simple linear polynomial is used:
-			Z = c0 * x0 + c1 + x1 + ... + c(n-1) * x(n-1) + cn.
+			Z = c0 * x0 + c1 * x1 + ... + c(n-1) * x(n-1) + cn.
 
 			The coefficients are ordered and they match with sensors
 			by means of sensor ID. Additional coefficients are