Merge tag 'drm-misc-next-2019-06-05' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.3:

UAPI Changes:

Cross-subsystem Changes:
- Add devicetree bindings for new panels.
- Convert allwinner's DT bindings to a schema.
- Drop video/hdmi static functions from kernel docs.
- Discard old fence when reserving space in reservation_object_get_fences_rcu.

Core Changes:
- Add missing -ENOMEM handling in edid loading.
- Fix null pointer deref in scheduler.
- Header cleanups, making them self-contained.
- Remove drmP.h inclusion from core.
- Fix make htmldocs warning in scheduler and HDR metadata.
- Fix a few warnings in the uapi header and add a doc section for it.
- Small MST sideband error handling fix.
- Clarify userspace review requirements.
- Clarify implicit/explicit fencing in docs.
- Flush output polling on shutdown.

Driver Changes:
- Small cleanups to stm.
- Add new driver for ST-Ericsson MCDE
- Kconfig fix for meson HDMI.
- Add support for Armadeus ST0700 Adapt panel.
- Add KOE tx14d24vm1bpa panel.
- Update timings for st7701.
- Fix compile error in mcde.
- Big series of tc358767 fixes, and enabling support for IRQ and HPD handling.
- Assorted fixes to sii902x, and implementing HDMI audio support.
- Enable HDR metadata support on amdgpu.
- Assorted fixes to atmel-hlcdc, and add sam9x60 LCD controller support.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6c43ffa9-11ff-5354-d772-c20fd4d1e3d9@linux.intel.com

12 files changed, 277 insertions, 97 deletions

diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
new file mode 100644
index 000000000000..47950fced28d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 MIPI-DSI Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+  "#address-cells": true
+  "#size-cells": true
+
+  compatible:
+    const: allwinner,sun6i-a31-mipi-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dphy
+
+  port:
+    type: object
+    description:
+      A port node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt. That
+      port should be the input endpoint, usually coming from the
+      associated TCON.
+
+patternProperties:
+  "^panel@[0-9]+$": true
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - resets
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi0: dsi@1ca0000 {
+        compatible = "allwinner,sun6i-a31-mipi-dsi";
+        reg = <0x01ca0000 0x1000>;
+        interrupts = <0 89 4>;
+        clocks = <&ccu 23>, <&ccu 96>;
+        clock-names = "bus", "mod";
+        resets = <&ccu 4>;
+        phys = <&dphy0>;
+        phy-names = "dphy";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+                compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
+                reg = <0>;
+                power-gpios = <&pio 1 7 0>; /* PB07 */
+                reset-gpios = <&r_pio 0 5 1>; /* PL05 */
+                backlight = <&pwm_bl>;
+        };
+
+        port {
+            dsi0_in_tcon0: endpoint {
+                remote-endpoint = <&tcon0_out_dsi0>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
index 72d2dc6c3e6b..2df44b7d3821 100644
--- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
+++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
@@ -5,10 +5,44 @@ Required properties:
 	- reg: i2c address of the bridge
 
 Optional properties:
-	- interrupts: describe the interrupt line used to inform the host 
+	- interrupts: describe the interrupt line used to inform the host
 	  about hotplug events.
 	- reset-gpios: OF device-tree gpio specification for RST_N pin.
 
+	HDMI audio properties:
+	- #sound-dai-cells: <0> or <1>. <0> if only i2s or spdif pin
+	   is wired, <1> if the both are wired. HDMI audio is
+	   configured only if this property is found.
+	- sil,i2s-data-lanes: Array of up to 4 integers with values of 0-3
+	   Each integer indicates which i2s pin is connected to which
+	   audio fifo. The first integer selects i2s audio pin for the
+	   first audio fifo#0 (HDMI channels 1&2), second for fifo#1
+	   (HDMI channels 3&4), and so on. There is 4 fifos and 4 i2s
+	   pins (SD0 - SD3). Any i2s pin can be connected to any fifo,
+	   but there can be no gaps. E.g. an i2s pin must be mapped to
+	   fifo#0 and fifo#1 before mapping a channel to fifo#2. Default
+	   value is <0>, describing SD0 pin beiging routed to hdmi audio
+	   fifo #0.
+	- clocks: phandle and clock specifier for each clock listed in
+           the clock-names property
+	- clock-names: "mclk"
+	   Describes SII902x MCLK input. MCLK is used to produce
+	   HDMI audio CTS values. This property is required if
+	   "#sound-dai-cells"-property is present. This property follows
+	   Documentation/devicetree/bindings/clock/clock-bindings.txt
+	   consumer binding.
+
+	If HDMI audio is configured the sii902x device becomes an I2S
+	and/or spdif audio codec component (e.g a digital audio sink),
+	that can be used in configuring a full audio devices with
+	simple-card or audio-graph-card binding. See their binding
+	documents on how to describe the way the sii902x device is
+	connected to the rest of the audio system:
+	Documentation/devicetree/bindings/sound/simple-card.txt
+	Documentation/devicetree/bindings/sound/audio-graph-card.txt
+	Note: In case of the audio-graph-card binding the used port
+	index should be 3.
+
 Optional subnodes:
 	- video input: this subnode can contain a video input port node
 	  to connect the bridge to a display controller output (See this
@@ -21,6 +55,12 @@ Example:
 		compatible = "sil,sii9022";
 		reg = <0x39>;
 		reset-gpios = <&pioA 1 0>;
+
+		#sound-dai-cells = <0>;
+		sil,i2s-data-lanes = < 0 1 2 >;
+		clocks = <&mclk>;
+		clock-names = "mclk";
+
 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
index e3f6aa6a214d..583c5e9dbe6b 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
@@ -12,6 +12,7 @@ Optional properties:
                    (active high shutdown input)
  - reset-gpios: OF device-tree gpio specification for RSTX pin
                 (active low system reset)
+ - toshiba,hpd-pin: TC358767 GPIO pin number to which HPD is connected to (0 or 1)
  - ports: the ports node can contain video interface port nodes to connect
    to a DPI/DSI source and to an eDP/DP sink according to [1][2]:
     - port@0: DSI input port
diff --git a/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt b/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt
new file mode 100644
index 000000000000..a30d63db3c8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt
@@ -0,0 +1,9 @@
+Armadeus ST0700 Adapt. A Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT with
+an adapter board.
+
+Required properties:
+- compatible: "armadeus,st0700-adapt"
+- power-supply: see panel-common.txt
+
+Optional properties:
+- backlight: see panel-common.txt
diff --git a/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt b/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt
new file mode 100644
index 000000000000..be7ac666807b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt
@@ -0,0 +1,42 @@
+Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel
+
+Required properties:
+- compatible: should be "koe,tx14d24vm1bpa"
+- backlight: phandle of the backlight device attached to the panel
+- power-supply: single regulator to provide the supply voltage
+
+Required nodes:
+- port: Parallel port mapping to connect this display
+
+This panel needs single power supply voltage. Its backlight is conntrolled
+via PWM signal.
+
+Example:
+--------
+
+Example device-tree definition when connected to iMX53 based board
+
+	lcd_panel: lcd-panel {
+		compatible = "koe,tx14d24vm1bpa";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+Then one needs to extend the dispX node:
+
+	lcd_display: disp1 {
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt b/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt
deleted file mode 100644
index 6a6cf5de08b0..000000000000
--- a/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-Allwinner A31 DSI Encoder
-=========================
-
-The DSI pipeline consists of two separate blocks: the DSI controller
-itself, and its associated D-PHY.
-
-DSI Encoder
------------
-
-The DSI Encoder generates the DSI signal from the TCON's.
-
-Required properties:
-  - compatible: value must be one of:
-    * allwinner,sun6i-a31-mipi-dsi
-  - reg: base address and size of memory-mapped region
-  - interrupts: interrupt associated to this IP
-  - clocks: phandles to the clocks feeding the DSI encoder
-    * bus: the DSI interface clock
-    * mod: the DSI module clock
-  - clock-names: the clock names mentioned above
-  - phys: phandle to the D-PHY
-  - phy-names: must be "dphy"
-  - resets: phandle to the reset controller driving the encoder
-
-  - ports: A ports node with endpoint definitions as defined in
-    Documentation/devicetree/bindings/media/video-interfaces.txt. The
-    first port should be the input endpoint, usually coming from the
-    associated TCON.
-
-Any MIPI-DSI device attached to this should be described according to
-the bindings defined in ../mipi-dsi-bus.txt
-
-D-PHY
------
-
-Required properties:
-  - compatible: value must be one of:
-    * allwinner,sun6i-a31-mipi-dphy
-  - reg: base address and size of memory-mapped region
-  - clocks: phandles to the clocks feeding the DSI encoder
-    * bus: the DSI interface clock
-    * mod: the DSI module clock
-  - clock-names: the clock names mentioned above
-  - resets: phandle to the reset controller driving the encoder
-
-Example:
-
-dsi0: dsi@1ca0000 {
-	compatible = "allwinner,sun6i-a31-mipi-dsi";
-	reg = <0x01ca0000 0x1000>;
-	interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&ccu CLK_BUS_MIPI_DSI>,
-		 <&ccu CLK_DSI_SCLK>;
-	clock-names = "bus", "mod";
-	resets = <&ccu RST_BUS_MIPI_DSI>;
-	phys = <&dphy0>;
-	phy-names = "dphy";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	panel@0 {
-		compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
-		reg = <0>;
-		power-gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; /* PB07 */
-		reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
-		backlight = <&pwm_bl>;
-	};
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			dsi0_in_tcon0: endpoint {
-				remote-endpoint = <&tcon0_out_dsi0>;
-			};
-		};
-	};
-};
-
-dphy0: d-phy@1ca1000 {
-	compatible = "allwinner,sun6i-a31-mipi-dphy";
-	reg = <0x01ca1000 0x1000>;
-	clocks = <&ccu CLK_BUS_MIPI_DSI>,
-		 <&ccu CLK_DSI_DPHY>;
-	clock-names = "bus", "mod";
-	resets = <&ccu RST_BUS_MIPI_DSI>;
-	#phy-cells = <0>;
-};
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
new file mode 100644
index 000000000000..250f9d5aabdf
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-mipi-dphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 MIPI D-PHY Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun6i-a31-mipi-dphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    dphy0: d-phy@1ca1000 {
+        compatible = "allwinner,sun6i-a31-mipi-dphy";
+        reg = <0x01ca1000 0x1000>;
+        clocks = <&ccu 23>, <&ccu 97>;
+        clock-names = "bus", "mod";
+        resets = <&ccu 4>;
+        #phy-cells = <0>;
+    };
+
+...
diff --git a/Documentation/gpu/drivers.rst b/Documentation/gpu/drivers.rst
index 044a7025477c..4bfb7068e9f7 100644
--- a/Documentation/gpu/drivers.rst
+++ b/Documentation/gpu/drivers.rst
@@ -7,6 +7,7 @@ GPU Driver Documentation
    amdgpu
    amdgpu-dc
    i915
+   mcde
    meson
    pl111
    tegra
diff --git a/Documentation/gpu/drm-client.rst b/Documentation/gpu/drm-client.rst
index 7e672063e7eb..58b5a1d1219d 100644
--- a/Documentation/gpu/drm-client.rst
+++ b/Documentation/gpu/drm-client.rst
@@ -10,3 +10,6 @@ Kernel clients
 
 .. kernel-doc:: drivers/gpu/drm/drm_client.c
    :export:
+
+.. kernel-doc:: drivers/gpu/drm/drm_client_modeset.c
+   :export:
diff --git a/Documentation/gpu/drm-uapi.rst b/Documentation/gpu/drm-uapi.rst
index 05874d09820c..94f90521f58c 100644
--- a/Documentation/gpu/drm-uapi.rst
+++ b/Documentation/gpu/drm-uapi.rst
@@ -85,9 +85,9 @@ leads to a few additional requirements:
 - The userspace side must be fully reviewed and tested to the standards of that
   userspace project. For e.g. mesa this means piglit testcases and review on the
   mailing list. This is again to ensure that the new interface actually gets the
-  job done.  The userspace-side reviewer should also provide at least an
-  Acked-by on the kernel uAPI patch indicating that they've looked at how the
-  kernel side is implementing the new feature being used.
+  job done.  The userspace-side reviewer should also provide an Acked-by on the
+  kernel uAPI patch indicating that they believe the proposed uAPI is sound and
+  sufficiently documented and validated for userspace's consumption.
 
 - The userspace patches must be against the canonical upstream, not some vendor
   fork. This is to make sure that no one cheats on the review and testing
@@ -329,3 +329,12 @@ DRM_IOCTL_MODESET_CTL
     mode setting, since on many devices the vertical blank counter is
     reset to 0 at some point during modeset. Modern drivers should not
     call this any more since with kernel mode setting it is a no-op.
+
+Userspace API Structures
+========================
+
+.. kernel-doc:: include/uapi/drm/drm_mode.h
+   :doc: overview
+
+.. kernel-doc:: include/uapi/drm/drm_mode.h
+   :internal:
diff --git a/Documentation/gpu/mcde.rst b/Documentation/gpu/mcde.rst
new file mode 100644
index 000000000000..c69e977defda
--- /dev/null
+++ b/Documentation/gpu/mcde.rst
@@ -0,0 +1,8 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================================================
+ drm/mcde ST-Ericsson MCDE Multi-channel display engine
+=======================================================
+
+.. kernel-doc:: drivers/gpu/drm/mcde/mcde_drv.c
+   :doc: ST-Ericsson MCDE DRM Driver
diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
index 66f05f4e469f..9d4038c50013 100644
--- a/Documentation/gpu/todo.rst
+++ b/Documentation/gpu/todo.rst
@@ -289,6 +289,9 @@ drm_fb_helper tasks
   these igt tests need to be fixed: kms_fbcon_fbt@psr and
   kms_fbcon_fbt@psr-suspend.
 
+- The max connector argument for drm_fb_helper_init() and
+  drm_fb_helper_fbdev_setup() isn't used anymore and can be removed.
+
 Core refactorings
 =================