diff options
| author |   Robert Schwebel <r.schwebel@pengutronix.de> | 2014-03-19 09:49:42 +0100 |
|---|---|---|
| committer |   Marc Kleine-Budde <mkl@pengutronix.de> | 2014-04-01 11:54:55 +0200 |
| commit | 5fb7639dee74496107f269a987933e2f0465692c (patch) | |
| tree | 8bc543158932cabfc341b0951d969d37171815ea /Documentation | |
| parent | can: usb_8dev: Fix memory leak in usb_8dev_start_xmit (diff) | |
| download | linux-dev-5fb7639dee74496107f269a987933e2f0465692c.tar.xz linux-dev-5fb7639dee74496107f269a987933e2f0465692c.zip | |
can: Documentation: fix parameter name "sample-point"
This patch fixes the name of the parameter to configure the sample point used
in iproute2's ip command. The correct writing is "sample-point" not
"sample_point".
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/networking/can.txt | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt index 0cbe6ec22d6f..2fa44cbe81b7 100644 --- a/Documentation/networking/can.txt +++ b/Documentation/networking/can.txt @@ -1017,7 +1017,7 @@ solution for a couple of reasons: in case of a bus-off condition after the specified delay time in milliseconds. By default it's off. - "bitrate 125000 sample_point 0.875" + "bitrate 125000 sample-point 0.875" Shows the real bit-rate in bits/sec and the sample-point in the range 0.000..0.999. If the calculation of bit-timing parameters is enabled in the kernel (CONFIG_CAN_CALC_BITTIMING=y), the |