Merge tag 'qcom-drivers-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers

Qualcomm ARM Based Driver Updates for v4.20

* Refactor of SCM compatibles and clock requirements
* SMEM cleanup
* Add LLCC EDAC driver
* Fixes for GENI clocks and macros
* Fix includes for llcc-slice and smem
* String overflow fixes for APR and wcnss_ctrl
* Fixup for COMPILE_TEST of qcom driver Kconfigs
* Cleanup of Kconfig depends of rpmh, smd_rpm, smsm, and smp2p
* Add SCM dependencies to SPM and rmtfs-mem

* tag 'qcom-drivers-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (38 commits)
  soc: qcom: geni: geni_se_clk_freq_match() should always accept multiples
  soc: qcom: geni: Don't ignore clk_round_rate() errors in geni_se_clk_tbl_get()
  soc: qcom: geni: Make version macros simpler
  dt-bindings: firmware: scm: Add MSM8998 and SDM845
  firmware: qcom: scm: Refactor clock handling
  dt-bindings: firmware: scm: Refactor compatibles and clocks
  soc: qcom: smem: a few last cleanups
  soc: qcom: smem: verify partition host ids match
  soc: qcom: smem: small change in global entry loop
  soc: qcom: smem: verify partition offset_free_uncached
  soc: qcom: smem: verify partition header size
  soc: qcom: smem: introduce qcom_smem_partition_header()
  soc: qcom: smem: require order of host ids to match
  soc: qcom: smem: verify both host ids in partition header
  soc: qcom: smem: small refactor in qcom_smem_enumerate_partitions()
  soc: qcom: smem: always ignore partitions with 0 offset or size
  soc: qcom: smem: initialize region struct only when successful
  soc: qcom: smem: rename variable in qcom_smem_get_global()
  drivers: qcom: rpmh-rsc: clear wait_for_compl after use
  soc: qcom: rmtfs-mem: Validate that scm is available
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

2 files changed, 38 insertions, 14 deletions

diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
index 5e85749262ae..eaee06b2d8f2 100644
--- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
@@ -16,11 +16,26 @@ Properties:
 - reg:
 	Usage: required
 	Value Type: <prop-encoded-array>
-	Definition: Start address and the the size of the register region.
+	Definition: The first element specifies the llcc base start address and
+		    the size of the register region. The second element specifies
+		    the llcc broadcast base address and size of the register region.
+
+- reg-names:
+        Usage: required
+        Value Type: <stringlist>
+        Definition: Register region names. Must be "llcc_base", "llcc_broadcast_base".
+
+- interrupts:
+	Usage: required
+	Definition: The interrupt is associated with the llcc edac device.
+			It's used for llcc cache single and double bit error detection
+			and reporting.
 
 Example:
 
 	cache-controller@1100000 {
 		compatible = "qcom,sdm845-llcc";
-		reg = <0x1100000 0x250000>;
+		reg = <0x1100000 0x200000>, <0x1300000 0x50000> ;
+		reg-names = "llcc_base", "llcc_broadcast_base";
+		interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 	};
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
index fcf6979c0b6d..41f133a4e2fa 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
@@ -7,16 +7,23 @@ assorted actions.
 
 Required properties:
 - compatible: must contain one of the following:
- * "qcom,scm-apq8064" for APQ8064 platforms
- * "qcom,scm-msm8660" for MSM8660 platforms
- * "qcom,scm-msm8690" for MSM8690 platforms
- * "qcom,scm-msm8996" for MSM8996 platforms
- * "qcom,scm-ipq4019" for IPQ4019 platforms
- * "qcom,scm" for later processors (MSM8916, APQ8084, MSM8974, etc)
-- clocks: One to three clocks may be required based on compatible.
- * No clock required for "qcom,scm-msm8996", "qcom,scm-ipq4019"
- * Only core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660", and "qcom,scm-msm8960"
- * Core, iface, and bus clocks required for "qcom,scm"
+ * "qcom,scm-apq8064"
+ * "qcom,scm-apq8084"
+ * "qcom,scm-msm8660"
+ * "qcom,scm-msm8916"
+ * "qcom,scm-msm8960"
+ * "qcom,scm-msm8974"
+ * "qcom,scm-msm8996"
+ * "qcom,scm-msm8998"
+ * "qcom,scm-ipq4019"
+ * "qcom,scm-sdm845"
+ and:
+ * "qcom,scm"
+- clocks: Specifies clocks needed by the SCM interface, if any:
+ * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and
+   "qcom,scm-msm8960"
+ * core, iface and bus clocks required for "qcom,scm-apq8084",
+   "qcom,scm-msm8916" and "qcom,scm-msm8974"
 - clock-names: Must contain "core" for the core clock, "iface" for the interface
   clock and "bus" for the bus clock per the requirements of the compatible.
 - qcom,dload-mode: phandle to the TCSR hardware block and offset of the
@@ -26,8 +33,10 @@ Example for MSM8916:
 
 	firmware {
 		scm {
-			compatible = "qcom,scm";
-			clocks = <&gcc GCC_CRYPTO_CLK> , <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>;
+			compatible = "qcom,msm8916", "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK> ,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
 			clock-names = "core", "bus", "iface";
 		};
 	};