Merge tag 'usb-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.10 merge window

Here is the big Gadget & PHY pull request. Many of us have
been really busy lately getting multiple drivers to a better
position.

Since this pull request is so large, I will divide it in sections
so it's easier to grasp what's included.

- cleanups:
	. UDC drivers no longer touch gadget->dev, that's now udc-core
		responsibility
	. Many more UDC drivers converted to usb_gadget_map/unmap_request()
	. UDC drivers no longer initialize DMA-related fields from gadget's
		device structure
	. UDC drivers don't touch gadget.dev.driver directly
	. UDC drivers don't assign gadget.dev.release directly
	. Removal of some unused DMA_ADDR_INVALID
	. Introduction of CONFIG_USB_PHY
	. All phy drivers have been moved to drivers/usb/phy and renamed to
		a common naming scheme
	. Fix PHY layer so it never returns a NULL pointer, also fix all
		callers to avoid using IS_ERR_OR_NULL()
	. Sparse fixes all over the place
	. drivers/usb/otg/ has been deleted
	. Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock
		usage

- new features:
	. UDC core now provides a generic way for tracking and reporting
		UDC's state (not attached, resuming, suspended, addressed,
		default, etc)
	. twl4030-usb learned that it shouldn't be enabled during init
	. Full DT support for DWC3 has been implemented
	. ab8500-usb learned about pinctrl framework
	. nop PHY learned about DeviceTree and regulators
	. DWC3 learned about suspend/resume
	. DWC3 can now be compiled in host-only and gadget-only (as well as
		DRD) configurations
	. UVC now enables streaming endpoint based on negotiated speed
	. isp1301 now implements the PHY API properly
	. configfs-based interface for gadget drivers which will lead to
		the removal of all code which just combines functions together
		to build functional gadget drivers.
	. f_serial and f_obex were converted to new configfs interface while
		maintaining old interface around.

- non-critical fixes:
	. UVC gadget driver got fixes for Endpoint usage and stream calculation
	. ab8500-usb fixed unbalanced clock and regulator API usage
	. twl4030-usb got a fix for when OMAP3 is booted with cable connected
	. fusb300_udc got a fix for DMA usage
	. UVC got fixes for two assertions of the USB Video Class Compliance
		specification revision 1.1
	. build warning issues caused by recent addition of __must_check to
		regulator API

These are all changes which deserve a mention, all other changes are related
to these one or minor spelling fixes and other similar tasks.

Signed-of-by: Felipe Balbi <balbi@ti.com>

3 files changed, 137 insertions, 13 deletions

diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index 1ef0ce71f8fa..662f0f1d2315 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -8,10 +8,10 @@ OMAP MUSB GLUE
    and disconnect.
  - multipoint : Should be "1" indicating the musb controller supports
    multipoint. This is a MUSB configuration-specific setting.
- - num_eps : Specifies the number of endpoints. This is also a
+ - num-eps : Specifies the number of endpoints. This is also a
    MUSB configuration-specific setting. Should be set to "16"
- - ram_bits : Specifies the ram address size. Should be set to "12"
- - interface_type : This is a board specific setting to describe the type of
+ - ram-bits : Specifies the ram address size. Should be set to "12"
+ - interface-type : This is a board specific setting to describe the type of
    interface between the controller and the phy. It should be "0" or "1"
    specifying ULPI and UTMI respectively.
  - mode : Should be "3" to represent OTG. "1" signifies HOST and "2"
@@ -29,18 +29,46 @@ usb_otg_hs: usb_otg_hs@4a0ab000 {
 	ti,hwmods = "usb_otg_hs";
 	ti,has-mailbox;
 	multipoint = <1>;
-	num_eps = <16>;
-	ram_bits = <12>;
+	num-eps = <16>;
+	ram-bits = <12>;
 	ctrl-module = <&omap_control_usb>;
 };
 
 Board specific device node entry
 &usb_otg_hs {
-	interface_type = <1>;
+	interface-type = <1>;
 	mode = <3>;
 	power = <50>;
 };
 
+OMAP DWC3 GLUE
+ - compatible : Should be "ti,dwc3"
+ - ti,hwmods : Should be "usb_otg_ss"
+ - reg : Address and length of the register set for the device.
+ - interrupts : The irq number of this device that is used to interrupt the
+   MPU
+ - #address-cells, #size-cells : Must be present if the device has sub-nodes
+ - utmi-mode : controls the source of UTMI/PIPE status for VBUS and OTG ID.
+   It should be set to "1" for HW mode and "2" for SW mode.
+ - ranges: the child address space are mapped 1:1 onto the parent address space
+
+Sub-nodes:
+The dwc3 core should be added as subnode to omap dwc3 glue.
+- dwc3 :
+   The binding details of dwc3 can be found in:
+   Documentation/devicetree/bindings/usb/dwc3.txt
+
+omap_dwc3 {
+	compatible = "ti,dwc3";
+	ti,hwmods = "usb_otg_ss";
+	reg = <0x4a020000 0x1ff>;
+	interrupts = <0 93 4>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	utmi-mode = <2>;
+	ranges;
+};
+
 OMAP CONTROL USB
 
 Required properties:
diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
index 033194934f64..f575302e5173 100644
--- a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
+++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
@@ -1,20 +1,25 @@
-* Samsung's usb phy transceiver
+SAMSUNG USB-PHY controllers
 
-The Samsung's phy transceiver is used for controlling usb phy for
-s3c-hsotg as well as ehci-s5p and ohci-exynos usb controllers
-across Samsung SOCs.
+** Samsung's usb 2.0 phy transceiver
+
+The Samsung's usb 2.0 phy transceiver is used for controlling
+usb 2.0 phy for s3c-hsotg as well as ehci-s5p and ohci-exynos
+usb controllers across Samsung SOCs.
 TODO: Adding the PHY binding with controller(s) according to the under
 developement generic PHY driver.
 
 Required properties:
 
 Exynos4210:
-- compatible : should be "samsung,exynos4210-usbphy"
+- compatible : should be "samsung,exynos4210-usb2phy"
 - reg : base physical address of the phy registers and length of memory mapped
 	region.
+- clocks: Clock IDs array as required by the controller.
+- clock-names: names of clock correseponding IDs clock property as requested
+	       by the controller driver.
 
 Exynos5250:
-- compatible : should be "samsung,exynos5250-usbphy"
+- compatible : should be "samsung,exynos5250-usb2phy"
 - reg : base physical address of the phy registers and length of memory mapped
 	region.
 
@@ -44,12 +49,69 @@ Example:
 	usbphy@125B0000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "samsung,exynos4210-usbphy";
+		compatible = "samsung,exynos4210-usb2phy";
 		reg = <0x125B0000 0x100>;
 		ranges;
 
+		clocks = <&clock 2>, <&clock 305>;
+		clock-names = "xusbxti", "otg";
+
 		usbphy-sys {
 			/* USB device and host PHY_CONTROL registers */
 			reg = <0x10020704 0x8>;
 		};
 	};
+
+
+** Samsung's usb 3.0 phy transceiver
+
+Starting exynso5250, Samsung's SoC have usb 3.0 phy transceiver
+which is used for controlling usb 3.0 phy for dwc3-exynos usb 3.0
+controllers across Samsung SOCs.
+
+Required properties:
+
+Exynos5250:
+- compatible : should be "samsung,exynos5250-usb3phy"
+- reg : base physical address of the phy registers and length of memory mapped
+	region.
+- clocks: Clock IDs array as required by the controller.
+- clock-names: names of clocks correseponding to IDs in the clock property
+	       as requested by the controller driver.
+
+Optional properties:
+- #address-cells: should be '1' when usbphy node has a child node with 'reg'
+		  property.
+- #size-cells: should be '1' when usbphy node has a child node with 'reg'
+	       property.
+- ranges: allows valid translation between child's address space and parent's
+	  address space.
+
+- The child node 'usbphy-sys' to the node 'usbphy' is for the system controller
+  interface for usb-phy. It should provide the following information required by
+  usb-phy controller to control phy.
+  - reg : base physical address of PHY_CONTROL registers.
+	  The size of this register is the total sum of size of all PHY_CONTROL
+	  registers that the SoC has. For example, the size will be
+	  '0x4' in case we have only one PHY_CONTROL register (e.g.
+	  OTHERS register in S3C64XX or USB_PHY_CONTROL register in S5PV210)
+	  and, '0x8' in case we have two PHY_CONTROL registers (e.g.
+	  USBDEVICE_PHY_CONTROL and USBHOST_PHY_CONTROL registers in exynos4x).
+	  and so on.
+
+Example:
+	usbphy@12100000 {
+		compatible = "samsung,exynos5250-usb3phy";
+		reg = <0x12100000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clocks = <&clock 1>, <&clock 286>;
+		clock-names = "ext_xtal", "usbdrd30";
+
+		usbphy-sys {
+			/* USB device and host PHY_CONTROL registers */
+			reg = <0x10040704 0x8>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
new file mode 100644
index 000000000000..d7e272671c7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
@@ -0,0 +1,34 @@
+USB NOP PHY
+
+Required properties:
+- compatible: should be usb-nop-xceiv
+
+Optional properties:
+- clocks: phandle to the PHY clock. Use as per Documentation/devicetree
+  /bindings/clock/clock-bindings.txt
+  This property is required if clock-frequency is specified.
+
+- clock-names: Should be "main_clk"
+
+- clock-frequency: the clock frequency (in Hz) that the PHY clock must
+  be configured to.
+
+- vcc-supply: phandle to the regulator that provides RESET to the PHY.
+
+- reset-supply: phandle to the regulator that provides power to the PHY.
+
+Example:
+
+	hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		clock-frequency = <19200000>;
+		clocks = <&osc 0>;
+		clock-names = "main_clk";
+		vcc-supply = <&hsusb1_vcc_regulator>;
+		reset-supply = <&hsusb1_reset_regulator>;
+	};
+
+hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator
+and expects that clock to be configured to 19.2MHz by the NOP PHY driver.
+hsusb1_vcc_regulator provides power to the PHY and hsusb1_reset_regulator
+controls RESET.