Merge tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes, nothing too exciting about
  this.

  Some changes hit arch/sh and arch/arm but are well isolated and
  acknowledged by the respective arch maintainers.

  Core changes:

   - Dropped the chained IRQ setup callback into GPIOLIB as we got rid
     of the last users of that in this changeset.

  New drivers:

   - New driver for Ingenic X1830.

   - New driver for Freescale i.MX8MP.

  Driver enhancements:

   - Fix all remaining Intel drivers to pass their IRQ chips along with
     the GPIO chips.

   - Intel Baytrail allocates its irqchip dynamically.

   - Intel Lynxpoint is thoroughly rewritten and modernized.

   - Aspeed AST2600 pin muxing and configuration is much improved.

   - Qualcomm SC7180 functions are updated and wakeup interrupt map is
     provided.

   - A whole slew of Renesas SH-PFC cleanups and improvements.

   - Fix up the Intel DT bindings to use the generic YAML DT bindings
     schema (a first user of this)"

* tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits)
  pinctrl: madera: Remove extra blank line
  pinctrl: qcom: Don't lock around irq_set_irq_wake()
  pinctrl: mvebu: armada-37xx: use use platform api
  gpio: Drop the chained IRQ handler assign function
  pinctrl: freescale: Add i.MX8MP pinctrl driver support
  dt-bindings: imx: Add pinctrl binding doc for i.MX8MP
  pinctrl: tigerlake: Tiger Lake uses _HID enumeration
  pinctrl: sunrisepoint: Add Coffee Lake-S ACPI ID
  pinctrl: iproc: Use platform_get_irq_optional() to avoid error message
  pinctrl: dt-bindings: Fix some errors in the lgm and pinmux schema
  pinctrl: intel: Pass irqchip when adding gpiochip
  pinctrl: intel: Add GPIO <-> pin mapping ranges via callback
  pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output
  pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins
  pinctrl: sunrisepoint: Add missing Interrupt Status register offset
  pinctrl: sh-pfc: Split R-Car H3 support in two independent drivers
  pinctrl: artpec6: fix __iomem on reg in set
  pinctrl: ingenic: Use devm_platform_ioremap_resource()
  pinctrl: ingenic: Factorize irq_set_type function
  pinctrl: ingenic: Remove duplicated ingenic_chip_info structures
  ...

8 files changed, 158 insertions, 131 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index 064b7dfc4252..3749fa233e87 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -54,8 +54,9 @@ patternProperties:
               TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
               TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
               THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13,
-              UART6, UART7, UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
-              WDTRST3, WDTRST4, ]
+              UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,
+              USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3,
+              WDTRST4, ]
         groups:
           allOf:
             - $ref: "/schemas/types.yaml#/definitions/string"
@@ -85,8 +86,8 @@ patternProperties:
               TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
               TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
               THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12G0,
-              UART12G1, UART13G0, UART13G1, UART6, UART7, UART8, UART9, VB,
-              VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4, ]
+              UART12G1, UART13G0, UART13G1, UART6, UART7, UART8, UART9, USBA,
+              USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4, ]
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
new file mode 100644
index 000000000000..2e31e120395e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mp-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX8MP IOMUX Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    const: fsl,imx8mp-iomuxc
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32-array
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    iomuxc: pinctrl@30330000 {
+        compatible = "fsl,imx8mp-iomuxc";
+        reg = <0x30330000 0x10000>;
+
+        pinctrl_uart2: uart2grp {
+            fsl,pins = <
+                0x228 0x488 0x5F0 0x0 0x6	0x49
+                0x228 0x488 0x000 0x0 0x0	0x49
+            >;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
index 0014d9899797..d9b2100c98e8 100644
--- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
@@ -10,9 +10,9 @@ GPIO port configuration registers and it is typical to refer to pins using the
 naming scheme "PxN" where x is a character identifying the GPIO port with
 which the pin is associated and N is an integer from 0 to 31 identifying the
 pin within that GPIO port. For example PA0 is the first pin in GPIO port A, and
-PB31 is the last pin in GPIO port B. The jz4740 and the x1000 contains 4 GPIO
-ports, PA to PD, for a total of 128 pins. The jz4760, the jz4770 and the jz4780
-contains 6 GPIO ports, PA to PF, for a total of 192 pins.
+PB31 is the last pin in GPIO port B. The jz4740, the x1000 and the x1830
+contains 4 GPIO ports, PA to PD, for a total of 128 pins. The jz4760, the
+jz4770 and the jz4780 contains 6 GPIO ports, PA to PF, for a total of 192 pins.
 
 
 Required properties:
@@ -28,6 +28,7 @@ Required properties:
     - "ingenic,x1000-pinctrl"
     - "ingenic,x1000e-pinctrl"
     - "ingenic,x1500-pinctrl"
+    - "ingenic,x1830-pinctrl"
  - reg: Address range of the pinctrl registers.
 
 
@@ -40,6 +41,7 @@ Required properties for sub-nodes (GPIO chips):
     - "ingenic,jz4770-gpio"
     - "ingenic,jz4780-gpio"
     - "ingenic,x1000-gpio"
+    - "ingenic,x1830-gpio"
  - reg: The GPIO bank number.
  - interrupt-controller: Marks the device node as an interrupt controller.
  - interrupts: Interrupt specifier for the controllers interrupt.
diff --git a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
new file mode 100644
index 000000000000..cd2b436350ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/intel,lgm-io.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Lightning Mountain SoC pinmux & GPIO controller binding
+
+maintainers:
+  - Rahul Tanwar <rahul.tanwar@linux.intel.com>
+
+description: |
+  Pinmux & GPIO controller controls pin multiplexing & configuration including
+  GPIO function selection & GPIO attributes configuration.
+
+properties:
+  compatible:
+    const: intel,lgm-io
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  '-pins$':
+    type: object
+    allOf:
+      - $ref: pincfg-node.yaml#
+      - $ref: pinmux-node.yaml#
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      function: true
+      groups: true
+      pins: true
+      pinmux: true
+      bias-pull-up: true
+      bias-pull-down: true
+      drive-strength: true
+      slew-rate: true
+      drive-open-drain: true
+      output-enable: true
+
+    required:
+      - function
+      - groups
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    pinctrl: pinctrl@e2880000 {
+        compatible = "intel,lgm-io";
+        reg = <0xe2880000 0x100000>;
+
+        uart0-pins {
+             pins = <64>, /* UART_RX0 */
+                    <65>; /* UART_TX0 */
+             function = "CONSOLE_UART0";
+             pinmux = <1>,
+                      <1>;
+             groups = "CONSOLE_UART0";
+          };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/intel,lgm-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/intel,lgm-pinctrl.yaml
deleted file mode 100644
index 240d429f773b..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/intel,lgm-pinctrl.yaml
+++ /dev/null
@@ -1,116 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/bindings/pinctrl/intel,lgm-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Intel Lightning Mountain SoC pinmux & GPIO controller binding
-
-maintainers:
-  - Rahul Tanwar <rahul.tanwar@linux.intel.com>
-
-description: |
-  Pinmux & GPIO controller controls pin multiplexing & configuration including
-  GPIO function selection & GPIO attributes configuration.
-
-  Please refer to [1] for details of the common pinctrl bindings used by the
-  client devices.
-
-  [1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-properties:
-  compatible:
-    const: intel,lgm-io
-
-  reg:
-    maxItems: 1
-
-# Client device subnode's properties
-patternProperties:
-  '-pins$':
-    type: object
-    description:
-      Pinctrl node's client devices use subnodes for desired pin configuration.
-      Client device subnodes use below standard properties.
-
-    properties:
-      function:
-        $ref: /schemas/types.yaml#/definitions/string
-        description:
-          A string containing the name of the function to mux to the group.
-
-      groups:
-        $ref: /schemas/types.yaml#/definitions/string-array
-        description:
-          An array of strings identifying the list of groups.
-
-      pins:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        description:
-          List of pins to select with this function.
-
-      pinmux:
-        description: The applicable mux group.
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32-array"
-
-      bias-pull-up:
-        type: boolean
-
-      bias-pull-down:
-        type: boolean
-
-      drive-strength:
-        description: |
-          Selects the drive strength for the specified pins in mA.
-          0: 2 mA
-          1: 4 mA
-          2: 8 mA
-          3: 12 mA
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1, 2, 3]
-
-      slew-rate:
-        type: boolean
-        description: |
-          Sets slew rate for specified pins.
-          0: slow slew
-          1: fast slew
-
-      drive-open-drain:
-        type: boolean
-
-      output-enable:
-        type: boolean
-
-    required:
-      - function
-      - groups
-
-    additionalProperties: false
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
-examples:
-  # Pinmux controller node
-  - |
-    pinctrl: pinctrl@e2880000 {
-        compatible = "intel,lgm-pinctrl";
-        reg = <0xe2880000 0x100000>;
-
-        uart0-pins {
-             pins = <64>, /* UART_RX0 */
-                    <65>; /* UART_TX0 */
-             function = "CONSOLE_UART0";
-             pinmux = <1>,
-                      <1>;
-             groups = "CONSOLE_UART0";
-          };
-    };
-
-...
diff --git a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
index 777623a57fd5..732d9075560b 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
@@ -114,7 +114,7 @@ properties:
       specific binding for the hardware defines whether the entries are integers
       or strings, and their meaning.
 
-  group:
+  groups:
     $ref: /schemas/types.yaml#/definitions/string-array
     description:
       the group to apply the properties to, if the driver supports
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt
index b5767ee82ee6..6ffeac9801df 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt
@@ -125,8 +125,9 @@ to specify in a pin configuration subnode:
 		    mi2s_1, mi2s_2, mss_lte, m_voc, pa_indicator, phase_flag,
 		    PLL_BIST, pll_bypassnl, pll_reset, prng_rosc, qdss,
 		    qdss_cti, qlink_enable, qlink_request, qspi_clk, qspi_cs,
-		    qspi_data, qup00, qup01, qup02, qup03, qup04, qup05,
-		    qup10, qup11, qup12, qup13, qup14, qup15, sdc1_tb,
+		    qspi_data, qup00, qup01, qup02_i2c, qup02_uart, qup03,
+		    qup04_i2c, qup04_uart, qup05, qup10, qup11_i2c, qup11_uart,
+		    qup12, qup13_i2c, qup13_uart, qup14, qup15, sdc1_tb,
 		    sdc2_tb, sd_write, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2,
 		    tgu_ch3, tsense_pwm1, tsense_pwm2, uim1, uim2, uim_batt,
 		    usb_phy, vfr_1, _V_GPIO, _V_PPS_IN, _V_PPS_OUT,
diff --git a/Documentation/driver-api/gpio/driver.rst b/Documentation/driver-api/gpio/driver.rst
index 2ff743105927..871922529332 100644
--- a/Documentation/driver-api/gpio/driver.rst
+++ b/Documentation/driver-api/gpio/driver.rst
@@ -507,11 +507,6 @@ available but we try to move away from this:
   cascaded irq has to be handled by a threaded interrupt handler.
   Apart from that it works exactly like the chained irqchip.
 
-- DEPRECATED: gpiochip_set_chained_irqchip(): sets up a chained cascaded irq
-  handler for a gpio_chip from a parent IRQ and passes the struct gpio_chip*
-  as handler data. Notice that we pass is as the handler data, since the
-  irqchip data is likely used by the parent irqchip.
-
 - gpiochip_set_nested_irqchip(): sets up a nested cascaded irq handler for a
   gpio_chip from a parent IRQ. As the parent IRQ has usually been
   explicitly requested by the driver, this does very little more than