diff options
| author |   Linus Torvalds <torvalds@linux-foundation.org> | 2019-09-18 11:14:31 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-09-18 11:14:31 -0700 |
| commit | 6cfae0c26b21dce323fe8799b66cf4bc996e3565 (patch) | |
| tree | 647f80442929de7ed17cc436c546c21c8c2b2aa9 /Documentation | |
| parent | Merge tag 'staging-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging (diff) | |
| parent | misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation (diff) | |
| download | linux-dev-6cfae0c26b21dce323fe8799b66cf4bc996e3565.tar.xz linux-dev-6cfae0c26b21dce323fe8799b66cf4bc996e3565.zip | |
Merge tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver pull request for 5.4-rc1.
As has been happening in previous releases, more and more individual
driver subsystem trees are ending up in here. Now if that is good or
bad I can't tell, but hopefully it makes your life easier as it's more
of an aggregation of trees together to one merge point for you.
Anyway, lots of stuff in here:
- habanalabs driver updates
- thunderbolt driver updates
- misc driver updates
- coresight and intel_th hwtracing driver updates
- fpga driver updates
- extcon driver updates
- some dma driver updates
- char driver updates
- android binder driver updates
- nvmem driver updates
- phy driver updates
- parport driver fixes
- pcmcia driver fix
- uio driver updates
- w1 driver updates
- configfs fixes
- other assorted driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits)
misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation
habanalabs: correctly cast variable to __le32
habanalabs: show correct id in error print
habanalabs: stop using the acronym KMD
habanalabs: display card name as sensors header
habanalabs: add uapi to retrieve aggregate H/W events
habanalabs: add uapi to retrieve device utilization
habanalabs: Make the Coresight timestamp perpetual
habanalabs: explicitly set the queue-id enumerated numbers
habanalabs: print to kernel log when reset is finished
habanalabs: replace __le32_to_cpu with le32_to_cpu
habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64
habanalabs: Handle HW_IP_INFO if device disabled or in reset
habanalabs: Expose devices after initialization is done
habanalabs: improve security in Debug IOCTL
habanalabs: use default structure for user input in Debug IOCTL
habanalabs: Add descriptive name to PSOC app status register
habanalabs: Add descriptive names to PSOC scratch-pad registers
habanalabs: create two char devices per ASIC
habanalabs: change device_setup_cdev() to be more generic
...
Diffstat (limited to 'Documentation')
22 files changed, 602 insertions, 33 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc index f54ae244f3f1..456cb62b384c 100644 --- a/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc +++ b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc @@ -12,7 +12,8 @@ Description: (RW) Configure MSC operating mode: - "single", for contiguous buffer mode (high-order alloc); - "multi", for multiblock mode; - "ExI", for DCI handler mode; - - "debug", for debug mode. + - "debug", for debug mode; + - any of the currently loaded buffer sinks. If operating mode changes, existing buffer is deallocated, provided there are no active users and tracing is not enabled, otherwise the write will fail. diff --git a/Documentation/ABI/testing/sysfs-class-mic.txt b/Documentation/ABI/testing/sysfs-class-mic index 6ef682603179..6ef682603179 100644 --- a/Documentation/ABI/testing/sysfs-class-mic.txt +++ b/Documentation/ABI/testing/sysfs-class-mic diff --git a/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu new file mode 100644 index 000000000000..ae9af984471a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu @@ -0,0 +1,128 @@ + Intel Stratix10 Remote System Update (RSU) device attributes + +What: /sys/devices/platform/stratix10-rsu.0/current_image +Date: August 2019 +KernelVersion: 5.4 +Contact: Richard Gong <richard.gong@linux.intel.com> +Description: + (RO) the address in flash of currently running image. + +What: /sys/devices/platform/stratix10-rsu.0/fail_image +Date: August 2019 +KernelVersion: 5.4 +Contact: Richard Gong <richard.gong@linux.intel.com> +Description: + (RO) the address in flash of failed image. + +What: /sys/devices/platform/stratix10-rsu.0/state +Date: August 2019 +KernelVersion: 5.4 +Contact: Richard Gong <richard.gong@linux.intel.com> +Description: + (RO) the state of RSU system. + The state field has two parts: major error code in + upper 16 bits and minor error code in lower 16 bits. + + b[15:0] + Currently used only when major error is 0xF006 + (CPU watchdog timeout), in which case the minor + error code is the value reported by CPU to + firmware through the RSU notify command before + the watchdog timeout occurs. + + b[31:16] + 0xF001 bitstream error + 0xF002 hardware access failure + 0xF003 bitstream corruption + 0xF004 internal error + 0xF005 device error + 0xF006 CPU watchdog timeout + 0xF007 internal unknown error + +What: /sys/devices/platform/stratix10-rsu.0/version +Date: August 2019 +KernelVersion: 5.4 +Contact: Richard Gong <richard.gong@linux.intel.com> +Description: + (RO) the version number of RSU firmware. 19.3 or late + version includes information about the firmware which + reported the error. + + pre 19.3: + b[31:0] + 0x0 version number + + 19.3 or late: + b[15:0] + 0x1 version number + b[31:16] + 0x0 no error + 0x0DCF Decision CMF error + 0x0ACF Application CMF error + +What: /sys/devices/platform/stratix10-rsu.0/error_location +Date: August 2019 +KernelVersion: 5.4 +Contact: Richard Gong <richard.gong@linux.intel.com> +Description: + (RO) the error offset inside the image that failed. + +What: /sys/devices/platform/stratix10-rsu.0/error_details +Date: August 2019 +KernelVersion: 5.4 +Contact: Richard Gong <richard.gong@linux.intel.com> +Description: + (RO) error code. + +What: /sys/devices/platform/stratix10-rsu.0/retry_counter +Date: August 2019 +KernelVersion: 5.4 +Contact: Richard Gong <richard.gong@linux.intel.com> +Description: + (RO) the current image's retry counter, which is used by + user to know how many times the images is still allowed + to reload itself before giving up and starting RSU + fail-over flow. + +What: /sys/devices/platform/stratix10-rsu.0/reboot_image +Date: August 2019 +KernelVersion: 5.4 +Contact: Richard Gong <richard.gong@linux.intel.com> +Description: + (WO) the address in flash of image to be loaded on next + reboot command. + +What: /sys/devices/platform/stratix10-rsu.0/notify +Date: August 2019 +KernelVersion: 5.4 +Contact: Richard Gong <richard.gong@linux.intel.com> +Description: + (WO) client to notify firmware with different actions. + + b[15:0] + inform firmware the current software execution + stage. + 0 the first stage bootloader didn't run or + didn't reach the point of launching second + stage bootloader. + 1 failed in second bootloader or didn't get + to the point of launching the operating + system. + 2 both first and second stage bootloader ran + and the operating system launch was + attempted. + + b[16] + 1 firmware to reset current image retry + counter. + 0 no action. + + b[17] + 1 firmware to clear RSU log + 0 no action. + + b[18] + this is negative logic + 1 no action + 0 firmware record the notify code defined + in b[15:0]. diff --git a/Documentation/ABI/testing/sysfs-driver-habanalabs b/Documentation/ABI/testing/sysfs-driver-habanalabs index f433fc6db3c6..782df74042ed 100644 --- a/Documentation/ABI/testing/sysfs-driver-habanalabs +++ b/Documentation/ABI/testing/sysfs-driver-habanalabs @@ -57,6 +57,7 @@ KernelVersion: 5.1 Contact: oded.gabbay@gmail.com Description: Allows the user to set the maximum clock frequency for MME, TPC and IC when the power management profile is set to "automatic". + This property is valid only for the Goya ASIC family What: /sys/class/habanalabs/hl<n>/ic_clk Date: Jan 2019 @@ -127,8 +128,8 @@ Description: Power management profile. Values are "auto", "manual". In "auto" the max clock frequency to a low value when there are no user processes that are opened on the device's file. In "manual" mode, the user sets the maximum clock frequency by writing to - ic_clk, mme_clk and tpc_clk - + ic_clk, mme_clk and tpc_clk. This property is valid only for + the Goya ASIC family What: /sys/class/habanalabs/hl<n>/preboot_btl_ver Date: Jan 2019 @@ -186,11 +187,4 @@ What: /sys/class/habanalabs/hl<n>/uboot_ver Date: Jan 2019 KernelVersion: 5.1 Contact: oded.gabbay@gmail.com -Description: Version of the u-boot running on the device's CPU - -What: /sys/class/habanalabs/hl<n>/write_open_cnt -Date: Jan 2019 -KernelVersion: 5.1 -Contact: oded.gabbay@gmail.com -Description: Displays the total number of user processes that are currently - opened on the device's file +Description: Version of the u-boot running on the device's CPU
\ No newline at end of file diff --git a/Documentation/ABI/testing/sysfs-platform-dfl-fme b/Documentation/ABI/testing/sysfs-platform-dfl-fme index 8fa4febfa4b2..72634d3ae4f4 100644 --- a/Documentation/ABI/testing/sysfs-platform-dfl-fme +++ b/Documentation/ABI/testing/sysfs-platform-dfl-fme @@ -21,3 +21,88 @@ Contact: Wu Hao <hao.wu@intel.com> Description: Read-only. It returns Bitstream (static FPGA region) meta data, which includes the synthesis date, seed and other information of this static FPGA region. + +What: /sys/bus/platform/devices/dfl-fme.0/cache_size +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-only. It returns cache size of this FPGA device. + +What: /sys/bus/platform/devices/dfl-fme.0/fabric_version +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-only. It returns fabric version of this FPGA device. + Userspace applications need this information to select + best data channels per different fabric design. + +What: /sys/bus/platform/devices/dfl-fme.0/socket_id +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-only. It returns socket_id to indicate which socket + this FPGA belongs to, only valid for integrated solution. + User only needs this information, in case standard numa node + can't provide correct information. + +What: /sys/bus/platform/devices/dfl-fme.0/errors/pcie0_errors +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-Write. Read this file for errors detected on pcie0 link. + Write this file to clear errors logged in pcie0_errors. Write + fails with -EINVAL if input parsing fails or input error code + doesn't match. + +What: /sys/bus/platform/devices/dfl-fme.0/errors/pcie1_errors +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-Write. Read this file for errors detected on pcie1 link. + Write this file to clear errors logged in pcie1_errors. Write + fails with -EINVAL if input parsing fails or input error code + doesn't match. + +What: /sys/bus/platform/devices/dfl-fme.0/errors/nonfatal_errors +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-only. It returns non-fatal errors detected. + +What: /sys/bus/platform/devices/dfl-fme.0/errors/catfatal_errors +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-only. It returns catastrophic and fatal errors detected. + +What: /sys/bus/platform/devices/dfl-fme.0/errors/inject_errors +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-Write. Read this file to check errors injected. Write this + file to inject errors for testing purpose. Write fails with + -EINVAL if input parsing fails or input inject error code isn't + supported. + +What: /sys/bus/platform/devices/dfl-fme.0/errors/fme_errors +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-Write. Read this file to get errors detected on FME. + Write this file to clear errors logged in fme_errors. Write + fials with -EINVAL if input parsing fails or input error code + doesn't match. + +What: /sys/bus/platform/devices/dfl-fme.0/errors/first_error +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-only. Read this file to get the first error detected by + hardware. + +What: /sys/bus/platform/devices/dfl-fme.0/errors/next_error +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-only. Read this file to get the second error detected by + hardware. diff --git a/Documentation/ABI/testing/sysfs-platform-dfl-port b/Documentation/ABI/testing/sysfs-platform-dfl-port index 6a92dda517b0..65658267fcc0 100644 --- a/Documentation/ABI/testing/sysfs-platform-dfl-port +++ b/Documentation/ABI/testing/sysfs-platform-dfl-port @@ -14,3 +14,88 @@ Description: Read-only. User can program different PR bitstreams to FPGA Accelerator Function Unit (AFU) for different functions. It returns uuid which could be used to identify which PR bitstream is programmed in this AFU. + +What: /sys/bus/platform/devices/dfl-port.0/power_state +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-only. It reports the APx (AFU Power) state, different APx + means different throttling level. When reading this file, it + returns "0" - Normal / "1" - AP1 / "2" - AP2 / "6" - AP6. + +What: /sys/bus/platform/devices/dfl-port.0/ap1_event +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-write. Read this file for AP1 (AFU Power State 1) event. + It's used to indicate transient AP1 state. Write 1 to this + file to clear AP1 event. + +What: /sys/bus/platform/devices/dfl-port.0/ap2_event +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-write. Read this file for AP2 (AFU Power State 2) event. + It's used to indicate transient AP2 state. Write 1 to this + file to clear AP2 event. + +What: /sys/bus/platform/devices/dfl-port.0/ltr +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-write. Read or set AFU latency tolerance reporting value. + Set ltr to 1 if the AFU can tolerate latency >= 40us or set it + to 0 if it is latency sensitive. + +What: /sys/bus/platform/devices/dfl-port.0/userclk_freqcmd +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Write-only. User writes command to this interface to set + userclock to AFU. + +What: /sys/bus/platform/devices/dfl-port.0/userclk_freqsts +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-only. Read this file to get the status of issued command + to userclck_freqcmd. + +What: /sys/bus/platform/devices/dfl-port.0/userclk_freqcntrcmd +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Write-only. User writes command to this interface to set + userclock counter. + +What: /sys/bus/platform/devices/dfl-port.0/userclk_freqcntrsts +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-only. Read this file to get the status of issued command + to userclck_freqcntrcmd. + +What: /sys/bus/platform/devices/dfl-port.0/errors/errors +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-Write. Read this file to get errors detected on port and + Accelerated Function Unit (AFU). Write error code to this file + to clear errors. Write fails with -EINVAL if input parsing + fails or input error code doesn't match. Write fails with + -EBUSY or -ETIMEDOUT if error can't be cleared as hardware + in low power state (-EBUSY) or not respoding (-ETIMEDOUT). + +What: /sys/bus/platform/devices/dfl-port.0/errors/first_error +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-only. Read this file to get the first error detected by + hardware. + +What: /sys/bus/platform/devices/dfl-port.0/errors/first_malformed_req +Date: August 2019 +KernelVersion: 5.4 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-only. Read this file to get the first malformed request + captured by hardware. diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index a575e42f7fec..c149fadc6f47 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -136,7 +136,9 @@ Required properties: OCOTP bindings based on SCU Message Protocol ------------------------------------------------------------ Required properties: -- compatible: Should be "fsl,imx8qxp-scu-ocotp" +- compatible: Should be one of: + "fsl,imx8qm-scu-ocotp", + "fsl,imx8qxp-scu-ocotp". - #address-cells: Must be 1. Contains byte index - #size-cells: Must be 1. Contains byte length diff --git a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt index 7f3d94ae81ff..208daaff0be4 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt @@ -72,5 +72,5 @@ codec: wm8280@0 { 1 2 1 /* MICDET2 MICBIAS2 GPIO=high */ >; - wlf,gpsw = <0>; + wlf,gpsw = <ARIZONA_GPSW_OPEN>; }; diff --git a/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt b/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt index d592c21245f2..624bd76f468e 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt @@ -5,7 +5,9 @@ controlled using I2C and enables USB data, stereo and mono audio, video, microphone, and UART data to use a common connector port. Required properties: - - compatible : Must be "fcs,fsa9480" + - compatible : Must be one of + "fcs,fsa9480" + "fcs,fsa880" - reg : Specifies i2c slave address. Must be 0x25. - interrupts : Should contain one entry specifying interrupt signal of interrupt parent to which interrupt pin of the chip is connected. diff --git a/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt index 817a8d4bf903..5dd0ff0f7b4e 100644 --- a/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt +++ b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt @@ -3,10 +3,7 @@ Altera FPGA To SDRAM Bridge Driver Required properties: - compatible : Should contain "altr,socfpga-fpga2sdram-bridge" -Optional properties: -- bridge-enable : 0 if driver should disable bridge at startup - 1 if driver should enable bridge at startup - Default is to leave bridge in current state. +See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings. Example: fpga_bridge3: fpga-bridge@ffc25080 { diff --git a/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt index f8e288c71b2d..8b26fbcff3c6 100644 --- a/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt +++ b/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt @@ -10,10 +10,7 @@ Required properties: - compatible : Should contain "altr,freeze-bridge-controller" - regs : base address and size for freeze bridge module -Optional properties: -- bridge-enable : 0 if driver should disable bridge at startup - 1 if driver should enable bridge at startup - Default is to leave bridge in current state. +See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings. Example: freeze-controller@100000450 { diff --git a/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt index 6406f9337eeb..68cce3945b10 100644 --- a/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt +++ b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt @@ -9,10 +9,7 @@ Required properties: - resets : Phandle and reset specifier for this bridge's reset - clocks : Clocks used by this module. -Optional properties: -- bridge-enable : 0 if driver should disable bridge at startup. - 1 if driver should enable bridge at startup. - Default is to leave bridge in its current state. +See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings. Example: fpga_bridge0: fpga-bridge@ff400000 { diff --git a/Documentation/devicetree/bindings/fpga/fpga-bridge.txt b/Documentation/devicetree/bindings/fpga/fpga-bridge.txt new file mode 100644 index 000000000000..72e06917288a --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/fpga-bridge.txt @@ -0,0 +1,13 @@ +FPGA Bridge Device Tree Binding + +Optional properties: +- bridge-enable : 0 if driver should disable bridge at startup + 1 if driver should enable bridge at startup + Default is to leave bridge in current state. + +Example: + fpga_bridge3: fpga-bridge@ffc25080 { + compatible = "altr,socfpga-fpga2sdram-bridge"; + reg = <0xffc25080 0x4>; + bridge-enable = <0>; + }; diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt index 8dcfba926bc7..4284d293fa61 100644 --- a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt +++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt @@ -18,12 +18,8 @@ Required properties: - clocks : input clock to IP - clock-names : should contain "aclk" -Optional properties: -- bridge-enable : 0 if driver should disable bridge at startup - 1 if driver should enable bridge at startup - Default is to leave bridge in current state. - -See Documentation/devicetree/bindings/fpga/fpga-region.txt for generic bindings. +See Documentation/devicetree/bindings/fpga/fpga-region.txt and +Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings. Example: fpga-bridge@100000450 { diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt new file mode 100644 index 000000000000..c07d89812b73 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt @@ -0,0 +1,45 @@ +Qualcomm QCS404 Network-On-Chip interconnect driver binding +----------------------------------------------------------- + +Required properties : +- compatible : shall contain only one of the following: + "qcom,qcs404-bimc" + "qcom,qcs404-pcnoc" + "qcom,qcs404-snoc" +- #interconnect-cells : should contain 1 + +reg : specifies the physical base address and size of registers +clocks : list of phandles and specifiers to all interconnect bus clocks +clock-names : clock names should include both "bus" and "bus_a" + +Example: + +soc { + ... + bimc: interconnect@400000 { + reg = <0x00400000 0x80000>; + compatible = "qcom,qcs404-bimc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + + pnoc: interconnect@500000 { + reg = <0x00500000 0x15080>; + compatible = "qcom,qcs404-pcnoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PNOC_CLK>, + <&rpmcc RPM_SMD_PNOC_A_CLK>; + }; + + snoc: interconnect@580000 { + reg = <0x00580000 0x23080>; + compatible = "qcom,qcs404-snoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; +}; diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt index 96ffd06d2ca8..904dadf3d07b 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt @@ -2,7 +2,7 @@ Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings This binding represents the on-chip eFuse OTP controller found on i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL, -i.MX7D/S, i.MX7ULP and i.MX8MQ SoCs. +i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM and i.MX8MN SoCs. Required properties: - compatible: should be one of @@ -16,6 +16,7 @@ Required properties: "fsl,imx7ulp-ocotp" (i.MX7ULP), "fsl,imx8mq-ocotp" (i.MX8MQ), "fsl,imx8mm-ocotp" (i.MX8MM), + "fsl,imx8mn-ocotp" (i.MX8MN), followed by "syscon". - #address-cells : Should be 1 - #size-cells : Should be 1 diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt index 9e3fc15e1af8..8324a4ee6f06 100644 --- a/Documentation/devicetree/bindings/pci/pci-armada8k.txt +++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt @@ -17,6 +17,14 @@ Required properties: name must be "core" for the first clock and "reg" for the second one +Optional properties: +- phys: phandle(s) to PHY node(s) following the generic PHY bindings. + Either 1, 2 or 4 PHYs might be needed depending on the number of + PCIe lanes. +- phy-names: names of the PHYs corresponding to the number of lanes. + Must be "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy" for + 2 PHYs. + Example: pcie@f2600000 { diff --git a/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml new file mode 100644 index 000000000000..8a56a8526cef --- /dev/null +++ b/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/lantiq,vrx200-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq VRX200 and ARX300 PCIe PHY Device Tree Bindings + +maintainers: + - Martin Blumenstingl <martin.blumenstingl@googlemail.com> + +properties: + "#phy-cells": + const: 1 + description: selects the PHY mode as defined in <dt-bindings/phy/phy-lantiq-vrx200-pcie.h> + + compatible: + enum: + - lantiq,vrx200-pcie-phy + - lantiq,arx300-pcie-phy + + reg: + maxItems: 1 + + clocks: + items: + - description: PHY module clock + - description: PDI register clock + + clock-names: + items: + - const: phy + - const: pdi + + resets: + items: + - description: exclusive PHY reset line + - description: shared reset line between the PCIe PHY and PCIe controller + + resets-names: + items: + - const: phy + - const: pcie + + lantiq,rcu: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the RCU syscon + + lantiq,rcu-endian-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: the offset of the endian registers for this PHY instance in the RCU syscon + + lantiq,rcu-big-endian-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: the mask to set the PDI (PHY) registers for this PHY instance to big endian + + big-endian: + description: Configures the PDI (PHY) registers in big-endian mode + type: boolean + + little-endian: + description: Configures the PDI (PHY) registers in big-endian mode + type: boolean + +required: + - "#phy-cells" + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - lantiq,rcu + - lantiq,rcu-endian-offset + - lantiq,rcu-big-endian-mask + +additionalProperties: false + +examples: + - | + pcie0_phy: phy@106800 { + compatible = "lantiq,vrx200-pcie-phy"; + reg = <0x106800 0x100>; + lantiq,rcu = <&rcu0>; + lantiq,rcu-endian-offset = <0x4c>; + lantiq,rcu-big-endian-mask = <0x80>; /* bit 7 */ + big-endian; + clocks = <&pmu 32>, <&pmu 36>; + clock-names = "phy", "pdi"; + resets = <&reset0 12 24>, <&reset0 22 22>; + reset-names = "phy", "pcie"; + #phy-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt index cf2cd86db267..8c60e6985950 100644 --- a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt +++ b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt @@ -25,6 +25,13 @@ Required properties: - #address-cells: should be 1. - #size-cells: should be 0. +Optional properlties: + +- clocks: pointers to the reference clocks for this device (CP110 only), + consequently: MG clock, MG Core clock, AXI clock. +- clock-names: names of used clocks for CP110 only, must be : + "mg_clk", "mg_core_clk" and "axi_clk". + A sub-node is required for each comphy lane provided by the comphy. Required properties (child nodes): @@ -39,6 +46,9 @@ Examples: compatible = "marvell,comphy-cp110"; reg = <0x120000 0x6000>; marvell,system-controller = <&cpm_syscon0>; + clocks = <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>, + <&CP110_LABEL(clk) 1 18>; + clock-names = "mg_clk", "mg_core_clk", "axi_clk"; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/driver-api/uio-howto.rst b/Documentation/driver-api/uio-howto.rst index 8fecfa11d4ff..84091cd25dc4 100644 --- a/Documentation/driver-api/uio-howto.rst +++ b/Documentation/driver-api/uio-howto.rst @@ -408,6 +408,13 @@ handler code. You also do not need to know anything about the chip's internal registers to create the kernel part of the driver. All you need to know is the irq number of the pin the chip is connected to. +When used in a device-tree enabled system, the driver needs to be +probed with the ``"of_id"`` module parameter set to the ``"compatible"`` +string of the node the driver is supposed to handle. By default, the +node's name (without the unit address) is exposed as name for the +UIO device in userspace. To set a custom name, a property named +``"linux,uio-name"`` may be specified in the DT node. + Using uio_dmem_genirq for platform devices ------------------------------------------ diff --git a/Documentation/fpga/dfl.rst b/Documentation/fpga/dfl.rst index 2f125abd777f..6fa483fc823e 100644 --- a/Documentation/fpga/dfl.rst +++ b/Documentation/fpga/dfl.rst @@ -87,6 +87,8 @@ The following functions are exposed through ioctls: - Get driver API version (DFL_FPGA_GET_API_VERSION) - Check for extensions (DFL_FPGA_CHECK_EXTENSION) - Program bitstream (DFL_FPGA_FME_PORT_PR) +- Assign port to PF (DFL_FPGA_FME_PORT_ASSIGN) +- Release port from PF (DFL_FPGA_FME_PORT_RELEASE) More functions are exposed through sysfs (/sys/class/fpga_region/regionX/dfl-fme.n/): @@ -102,6 +104,10 @@ More functions are exposed through sysfs one FPGA device may have more than one port, this sysfs interface indicates how many ports the FPGA device has. + Global error reporting management (errors/) + error reporting sysfs interfaces allow user to read errors detected by the + hardware, and clear the logged errors. + FIU - PORT ========== @@ -143,6 +149,10 @@ More functions are exposed through sysfs: Read Accelerator GUID (afu_id) afu_id indicates which PR bitstream is programmed to this AFU. + Error reporting (errors/) + error reporting sysfs interfaces allow user to read port/afu errors + detected by the hardware, and clear the logged errors. + DFL Framework Overview ====================== @@ -218,6 +228,101 @@ the compat_id exposed by the target FPGA region. This check is usually done by userspace before calling the reconfiguration IOCTL. +FPGA virtualization - PCIe SRIOV +================================ +This section describes the virtualization support on DFL based FPGA device to +enable accessing an accelerator from applications running in a virtual machine +(VM). This section only describes the PCIe based FPGA device with SRIOV support. + +Features supported by the particular FPGA device are exposed through Device +Feature Lists, as illustrated below: + +:: + + +-------------------------------+ +-------------+ + | PF | | VF | + +-------------------------------+ +-------------+ + ^ ^ ^ ^ + | | | | + +-----|------------|---------|--------------|-------+ + | | | | | | + | +-----+ +-------+ +-------+ +-------+ | + | | FME | | Port0 | | Port1 | | Port2 | | + | +-----+ +-------+ +-------+ +-------+ | + | ^ ^ ^ | + | | | | | + | +-------+ +------+ +-------+ | + | | AFU | | AFU | | AFU | | + | +-------+ +------+ +-------+ | + | | + | DFL based FPGA PCIe Device | + +---------------------------------------------------+ + +FME is always accessed through the physical function (PF). + +Ports (and related AFUs) are accessed via PF by default, but could be exposed +through virtual function (VF) devices via PCIe SRIOV. Each VF only contains +1 Port and 1 AFU for isolation. Users could assign individual VFs (accelerators) +created via PCIe SRIOV interface, to virtual machines. + +The driver organization in virtualization case is illustrated below: +:: + + +-------++------++------+ | + | FME || FME || FME | | + | FPGA || FPGA || FPGA | | + |Manager||Bridge||Region| | + +-------++------++------+ | + +-----------------------+ +--------+ | +--------+ + | FME | | AFU | | | AFU | + | Module | | Module | | | Module | + +-----------------------+ +--------+ | +--------+ + +-----------------------+ | +-----------------------+ + | FPGA Container Device | | | FPGA Container Device | + | (FPGA Base Region) | | | (FPGA Base Region) | + +-----------------------+ | +-----------------------+ + +------------------+ | +------------------+ + | FPGA PCIE Module | | Virtual | FPGA PCIE Module | + +------------------+ Host | Machine +------------------+ + -------------------------------------- | ------------------------------ + +---------------+ | +---------------+ + | PCI PF Device | | | PCI VF Device | + +---------------+ | +---------------+ + +FPGA PCIe device driver is always loaded first once a FPGA PCIe PF or VF device +is detected. It: + +* Finishes enumeration on both FPGA PCIe PF and VF device using common + interfaces from DFL framework. +* Supports SRIOV. + +The FME device driver plays a management role in this driver architecture, it +provides ioctls to release Port from PF and assign Port to PF. After release +a port from PF, then it's safe to expose this port through a VF via PCIe SRIOV +sysfs interface. + +To enable accessing an accelerator from applications running in a VM, the +respective AFU's port needs to be assigned to a VF using the following steps: + +#. The PF owns all AFU ports by default. Any port that needs to be + reassigned to a VF must first be released through the + DFL_FPGA_FME_PORT_RELEASE ioctl on the FME device. + +#. Once N ports are released from PF, then user can use command below + to enable SRIOV and VFs. Each VF owns only one Port with AFU. + + :: + + echo N > $PCI_DEVICE_PATH/sriov_numvfs + +#. Pass through the VFs to VMs + +#. The AFU under VF is accessible from applications in VM (using the + same driver inside the VF). + +Note that an FME can't be assigned to a VF, thus PR and other management +functions are only available via the PF. + Device enumeration ================== This section introduces how applications enumerate the fpga device from diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst index a57f92dfe49a..f11c5daeada5 100644 --- a/Documentation/misc-devices/index.rst +++ b/Documentation/misc-devices/index.rst @@ -20,3 +20,4 @@ fit into other categories. isl29003 lis3lv02d max6875 + xilinx_sdfec |