Merge branch 'drm-sti-next-2014-12-11' of http://git.linaro.org/people/benjamin.gaignard/kernel into drm-next

This series of patches fix various issues in STI drm driver.
Now HDMI i2c adapter could be selected in device tree
and plug detection doesn't use gpio anymore.
I also had fix some signal timing problems after testing the driver
on more hardware.
The remaining patches attemps to simplify the code and prepare
the next evolutions like DVO and auxiliary CRTC support

* 'drm-sti-next-2014-12-11' of http://git.linaro.org/people/benjamin.gaignard/kernel:
  drm: sti: correctly cleanup CRTC and planes
  drm: sti: add HQVDP plane
  drm: sti: add cursor plane
  drm: sti: enable auxiliary CRTC
  drm: sti: fix delay in VTG programming
  drm: sti: prepare sti_tvout to support auxiliary crtc
  drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off}
  drm: sti: fix hdmi avi infoframe
  drm: sti: remove event lock while disabling vblank
  drm: sti: simplify gdp code
  drm: sti: clear all mixer control
  drm: sti: remove gpio for HDMI hot plug detection
  drm: sti: allow to change hdmi ddc i2c adapter

1 files changed, 27 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
index 2d150c311a05..c99eb34e640b 100644
--- a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
+++ b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
@@ -68,7 +68,7 @@ STMicroelectronics stih4xx platforms
     number of clocks may depend of the SoC type.
   - clock-names: names of the clocks listed in clocks property in the same
     order.
-  - hdmi,hpd-gpio: gpio id to detect if an hdmi cable is plugged or not.
+  - ddc: phandle of an I2C controller used for DDC EDID probing
 
 sti-hda:
   Required properties:
@@ -83,6 +83,22 @@ sti-hda:
   - clock-names: names of the clocks listed in clocks property in the same
     order.
 
+sti-hqvdp:
+  must be a child of sti-display-subsystem
+  Required properties:
+  - compatible: "st,stih<chip>-hqvdp"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - clocks: from common clock binding: handle hardware IP needed clocks, the
+    number of clocks may depend of the SoC type.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: names of the clocks listed in clocks property in the same
+    order.
+  - resets: resets to be used by the device
+    See ../reset/reset.txt for details.
+  - reset-names: names of the resets listed in resets property in the same
+    order.
+  - st,vtg: phandle on vtg main device node.
+
 Example:
 
 / {
@@ -173,7 +189,6 @@ Example:
 				interrupt-names	= "irq";
 				clock-names	= "pix", "tmds", "phy", "audio";
 				clocks          = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>;
-				hdmi,hpd-gpio	= <&PIO2 5>;
 			};
 
 			sti-hda@fe85a000 {
@@ -184,6 +199,16 @@ Example:
 				clocks          = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>;
 			};
 		};
+
+		sti-hqvdp@9c000000 {
+				compatible	= "st,stih407-hqvdp";
+				reg		= <0x9C00000 0x100000>;
+				clock-names	= "hqvdp", "pix_main";
+				clocks		= <&clk_s_c0_flexgen CLK_MAIN_DISP>, <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>;
+				reset-names     = "hqvdp";
+				resets          = <&softreset STIH407_HDQVDP_SOFTRESET>;
+				st,vtg		= <&vtg_main>;
+			};
 	};
 	...
 };