diff options
author | David S. Miller <davem@davemloft.net> | 2019-11-12 20:08:00 -0800 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2019-11-12 20:08:00 -0800 |
commit | 90bc72b13c08eedf73b7c0bd94ef23c467800c4a (patch) | |
tree | 0b4ed56eea28ded96824cdecc237752836e22b5a /Documentation | |
parent | net: dsa: sja1105: Print the reset reason (diff) | |
parent | net: bcmgenet: Add RGMII_RXID support (diff) | |
download | linux-dev-90bc72b13c08eedf73b7c0bd94ef23c467800c4a.tar.xz linux-dev-90bc72b13c08eedf73b7c0bd94ef23c467800c4a.zip |
Merge branch 'ARM-Enable-GENET-support-for-RPi-4'
Stefan Wahren says:
====================
ARM: Enable GENET support for RPi 4
Raspberry Pi 4 uses the broadcom genet chip in version five.
This chip has a dma controller integrated. Up to now the maximal
burst size was hard-coded to 0x10. But it turns out that Raspberry Pi 4
does only work with the smaller maximal burst size of 0x8.
Additionally the patch series has some IRQ retrieval improvements and
adds support for a missing PHY mode.
This series based on Matthias Brugger's V1 series [1].
[1] - https://patchwork.kernel.org/cover/11186193/
Changes in V5:
- address Doug's comment
Changes in V4:
- rebased on current net-next
- remove RGMII_ID support
- remove fixes tag from patch 1
- add Florian's suggestions to patch 5
Changes in V3:
- introduce SoC-specific compatibles for GENET (incl. dt-binding)
- use platform_get_irq_optional for optional IRQ
- remove Fixes tag from IRQ error handling change
- move most of MDIO stuff to bcm2711.dtsi
Changes in V2:
- add 2 fixes for IRQ retrieval
- add support for missing PHY modes
- declare PHY mode RGMII RXID based on the default settings
- add alias to allow firmware append the MAC address
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/devicetree/bindings/net/brcm,bcmgenet.txt | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt index 3956af1d30f3..33a0d67e4ce5 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt +++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt @@ -2,7 +2,7 @@ Required properties: - compatible: should contain one of "brcm,genet-v1", "brcm,genet-v2", - "brcm,genet-v3", "brcm,genet-v4", "brcm,genet-v5". + "brcm,genet-v3", "brcm,genet-v4", "brcm,genet-v5", "brcm,bcm2711-genet-v5". - reg: address and length of the register set for the device - interrupts and/or interrupts-extended: must be two cells, the first cell is the general purpose interrupt line, while the second cell is the |