Merge tag 'thermal-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

 - Depromote debug print on the db8500 platform (Linus Walleij)

 - Fix compilation warning when compiling with make W=1 (Amit Kucheria)

 - Code cleanup and refactoring, regmap conversion and add hwmon support
   on Qoriq (Andrey Smirnov)

 - Add an idle injection cpu cooling device and its documentation,
   rename the cpu_cooling device to cpufreq_cooling device (Daniel
   Lezcano)

 - Convert unexported functions to static, add the __init annotation in
   the thermal-of code and remove the pointless wrapper functions
   (Daniel Lezcano)

 - Fix register offset for Armada XP and register reset bit
   initialization (Zak Hays)

 - Enable hwmon on the rockchip (Stefan Schaeckeler)

 - Add the thermal sensor for the H6/H5/H3/A64/A83T/R40 sun8i platform
   and their device tree bindings, followed by a fix for the ths number
   and the sparse warnings (Yangtao Li)

 - Code cleansup for the sun8i and hwmon support (Yangtao Li)

 - Silent some messages which are misleading given the changes made in
   the previous version on generic-adc (Martin Blumenstingl)

 - Rename exynos to Exynos (Krzysztof Kozlowski)

 - Add the bcm2711 thermal driver with the device tree bindings (Stefan
   Wahren)

 - Use usleep_range() instead of udelay() as the call is always done in
   a sleep-able context (Geert Uytterhoeven)

 - Do code cleanup and re-organization to set the scene for a new
   process for the brcmstb (Florian Fainelli)

 - Fix bindings check issues on brcm (Stefan Wahren)

 - Add Jasper Lake support on int340x (Nivedita Swaminathan)

 - Add Comet Lake support on intel pch (Gayatri Kammela)

 - Fix unmatched pci_release_region() on x86 (Chuhong Yuan)

 - Remove temperature boundaries for rcar and rcar3 (Niklas Söderlund)

 - Fix return value to -ENODEV when thermal_zone_of_sensor_register() is
   called with the of-node is missing (Peter Mamonov)

 - Code cleanup, interrupt bouncing, and better support on stm32 (Pascal
   Paillet)

* tag 'thermal-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (66 commits)
  thermal: stm32: Fix low threshold interrupt flood
  thermal: stm32: Improve temperature computing
  thermal: stm32: Handle multiple trip points
  thermal: stm32: Disable interrupts at probe
  thermal: stm32: Rework sensor mode management
  thermal: stm32: Fix icifr register name
  thermal: of: Make thermal_zone_of_sensor_register return -ENODEV if a sensor OF node is missing
  thermal: rcar_gen3_thermal: Remove temperature bound
  thermal: rcar_thermal: Remove temperature bound
  thermal: intel: intel_pch_thermal: Add Comet Lake (CML) platform support
  thermal: intel: Fix unmatched pci_release_region
  thermal: int340x: processor_thermal: Add Jasper Lake support
  dt-bindings: brcm,avs-ro-thermal: Fix binding check issues
  thermal: brcmstb_thermal: Register different ops per process
  thermal: brcmstb_thermal: Restructure interrupt registration
  thermal: brcmstb_thermal: Add 16nm process thermal parameters
  dt-bindings: thermal: Define BCM7216 thermal sensor compatible
  thermal: brcmstb_thermal: Prepare to support a different process
  thermal: brcmstb_thermal: Do not use DT coefficients
  thermal: rcar_thermal: Use usleep_range() instead of udelay()
  ...

5 files changed, 407 insertions, 6 deletions

diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
new file mode 100644
index 000000000000..87369264feb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/allwinner,sun8i-a83t-ths.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner SUN8I Thermal Controller Device Tree Bindings
+
+maintainers:
+  - Vasily Khoruzhick <anarsoul@gmail.com>
+  - Yangtao Li <tiny.windzz@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun8i-a83t-ths
+      - allwinner,sun8i-h3-ths
+      - allwinner,sun8i-r40-ths
+      - allwinner,sun50i-a64-ths
+      - allwinner,sun50i-h5-ths
+      - allwinner,sun50i-h6-ths
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: bus
+      - const: mod
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  nvmem-cells:
+    maxItems: 1
+    description: Calibration data for thermal sensors
+
+  nvmem-cell-names:
+    const: calibration
+
+  # See ./thermal.txt for details
+  "#thermal-sensor-cells":
+    enum:
+      - 0
+      - 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun50i-h6-ths
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          maxItems: 1
+
+    else:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          minItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun8i-h3-ths
+
+    then:
+      properties:
+        "#thermal-sensor-cells":
+          const: 0
+
+    else:
+      properties:
+        "#thermal-sensor-cells":
+          const: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - const: allwinner,sun8i-h3-ths
+              - const: allwinner,sun8i-r40-ths
+              - const: allwinner,sun50i-a64-ths
+              - const: allwinner,sun50i-h5-ths
+              - const: allwinner,sun50i-h6-ths
+
+    then:
+      required:
+        - clocks
+        - clock-names
+        - resets
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    thermal-sensor@1f04000 {
+         compatible = "allwinner,sun8i-a83t-ths";
+         reg = <0x01f04000 0x100>;
+         interrupts = <0 31 0>;
+         nvmem-cells = <&ths_calibration>;
+         nvmem-cell-names = "calibration";
+         #thermal-sensor-cells = <1>;
+    };
+
+  - |
+    thermal-sensor@1c25000 {
+         compatible = "allwinner,sun8i-h3-ths";
+         reg = <0x01c25000 0x400>;
+         clocks = <&ccu 0>, <&ccu 1>;
+         clock-names = "bus", "mod";
+         resets = <&ccu 2>;
+         interrupts = <0 31 0>;
+         nvmem-cells = <&ths_calibration>;
+         nvmem-cell-names = "calibration";
+         #thermal-sensor-cells = <0>;
+    };
+
+  - |
+    thermal-sensor@5070400 {
+         compatible = "allwinner,sun50i-h6-ths";
+         reg = <0x05070400 0x100>;
+         clocks = <&ccu 0>;
+         clock-names = "bus";
+         resets = <&ccu 2>;
+         interrupts = <0 15 0>;
+         nvmem-cells = <&ths_calibration>;
+         nvmem-cell-names = "calibration";
+         #thermal-sensor-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
new file mode 100644
index 000000000000..d9fdf4809a49
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/brcm,avs-ro-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom AVS ring oscillator thermal
+
+maintainers:
+  - Stefan Wahren <wahrenst@gmx.net>
+
+description: |+
+  The thermal node should be the child of a syscon node with the
+  required property:
+
+  - compatible: Should be one of the following:
+                "brcm,bcm2711-avs-monitor", "syscon", "simple-mfd"
+
+  Refer to the the bindings described in
+  Documentation/devicetree/bindings/mfd/syscon.txt
+
+properties:
+  compatible:
+    const: brcm,bcm2711-thermal
+
+  # See ./thermal.txt for details
+  "#thermal-sensor-cells":
+    const: 0
+
+required:
+  - compatible
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+        avs-monitor@7d5d2000 {
+                compatible = "brcm,bcm2711-avs-monitor",
+                             "syscon", "simple-mfd";
+                reg = <0x7d5d2000 0xf00>;
+
+                thermal: thermal {
+                        compatible = "brcm,bcm2711-thermal";
+                        #thermal-sensor-cells = <0>;
+                };
+        };
+...
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
index 43a9ed545944..74a9ef09db8b 100644
--- a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
@@ -3,9 +3,13 @@
 Thermal management core, provided by the AVS TMON hardware block.
 
 Required properties:
-- compatible: must be "brcm,avs-tmon" and/or "brcm,avs-tmon-bcm7445"
+- compatible: must be one of:
+	"brcm,avs-tmon-bcm7216"
+	"brcm,avs-tmon-bcm7445"
+	"brcm,avs-tmon"
 - reg: address range for the AVS TMON registers
-- interrupts: temperature monitor interrupt, for high/low threshold triggers
+- interrupts: temperature monitor interrupt, for high/low threshold triggers,
+	      required except for "brcm,avs-tmon-bcm7216"
 - interrupt-names: should be "tmon"
 
 Example:
diff --git a/Documentation/driver-api/thermal/cpu-idle-cooling.rst b/Documentation/driver-api/thermal/cpu-idle-cooling.rst
new file mode 100644
index 000000000000..e4f0859486c7
--- /dev/null
+++ b/Documentation/driver-api/thermal/cpu-idle-cooling.rst
@@ -0,0 +1,189 @@
+
+Situation:
+----------
+
+Under certain circumstances a SoC can reach a critical temperature
+limit and is unable to stabilize the temperature around a temperature
+control. When the SoC has to stabilize the temperature, the kernel can
+act on a cooling device to mitigate the dissipated power. When the
+critical temperature is reached, a decision must be taken to reduce
+the temperature, that, in turn impacts performance.
+
+Another situation is when the silicon temperature continues to
+increase even after the dynamic leakage is reduced to its minimum by
+clock gating the component. This runaway phenomenon can continue due
+to the static leakage. The only solution is to power down the
+component, thus dropping the dynamic and static leakage that will
+allow the component to cool down.
+
+Last but not least, the system can ask for a specific power budget but
+because of the OPP density, we can only choose an OPP with a power
+budget lower than the requested one and under-utilize the CPU, thus
+losing performance. In other words, one OPP under-utilizes the CPU
+with a power less than the requested power budget and the next OPP
+exceeds the power budget. An intermediate OPP could have been used if
+it were present.
+
+Solutions:
+----------
+
+If we can remove the static and the dynamic leakage for a specific
+duration in a controlled period, the SoC temperature will
+decrease. Acting on the idle state duration or the idle cycle
+injection period, we can mitigate the temperature by modulating the
+power budget.
+
+The Operating Performance Point (OPP) density has a great influence on
+the control precision of cpufreq, however different vendors have a
+plethora of OPP density, and some have large power gap between OPPs,
+that will result in loss of performance during thermal control and
+loss of power in other scenarios.
+
+At a specific OPP, we can assume that injecting idle cycle on all CPUs
+belong to the same cluster, with a duration greater than the cluster
+idle state target residency, we lead to dropping the static and the
+dynamic leakage for this period (modulo the energy needed to enter
+this state). So the sustainable power with idle cycles has a linear
+relation with the OPP’s sustainable power and can be computed with a
+coefficient similar to:
+
+	    Power(IdleCycle) = Coef x Power(OPP)
+
+Idle Injection:
+---------------
+
+The base concept of the idle injection is to force the CPU to go to an
+idle state for a specified time each control cycle, it provides
+another way to control CPU power and heat in addition to
+cpufreq. Ideally, if all CPUs belonging to the same cluster, inject
+their idle cycles synchronously, the cluster can reach its power down
+state with a minimum power consumption and reduce the static leakage
+to almost zero.  However, these idle cycles injection will add extra
+latencies as the CPUs will have to wakeup from a deep sleep state.
+
+We use a fixed duration of idle injection that gives an acceptable
+performance penalty and a fixed latency. Mitigation can be increased
+or decreased by modulating the duty cycle of the idle injection.
+
+     ^
+     |
+     |
+     |-------                         -------
+     |_______|_______________________|_______|___________
+
+     <------>
+       idle  <---------------------->
+                    running
+
+      <----------------------------->
+              duty cycle 25%
+
+
+The implementation of the cooling device bases the number of states on
+the duty cycle percentage. When no mitigation is happening the cooling
+device state is zero, meaning the duty cycle is 0%.
+
+When the mitigation begins, depending on the governor's policy, a
+starting state is selected. With a fixed idle duration and the duty
+cycle (aka the cooling device state), the running duration can be
+computed.
+
+The governor will change the cooling device state thus the duty cycle
+and this variation will modulate the cooling effect.
+
+     ^
+     |
+     |
+     |-------                 -------
+     |_______|_______________|_______|___________
+
+     <------>
+       idle  <-------------->
+                running
+
+      <----------------------------->
+              duty cycle 33%
+
+
+     ^
+     |
+     |
+     |-------         -------
+     |_______|_______|_______|___________
+
+     <------>
+       idle  <------>
+              running
+
+      <------------->
+       duty cycle 50%
+
+The idle injection duration value must comply with the constraints:
+
+- It is less than or equal to the latency we tolerate when the
+  mitigation begins. It is platform dependent and will depend on the
+  user experience, reactivity vs performance trade off we want. This
+  value should be specified.
+
+- It is greater than the idle state’s target residency we want to go
+  for thermal mitigation, otherwise we end up consuming more energy.
+
+Power considerations
+--------------------
+
+When we reach the thermal trip point, we have to sustain a specified
+power for a specific temperature but at this time we consume:
+
+ Power = Capacitance x Voltage^2 x Frequency x Utilisation
+
+... which is more than the sustainable power (or there is something
+wrong in the system setup). The ‘Capacitance’ and ‘Utilisation’ are a
+fixed value, ‘Voltage’ and the ‘Frequency’ are fixed artificially
+because we don’t want to change the OPP. We can group the
+‘Capacitance’ and the ‘Utilisation’ into a single term which is the
+‘Dynamic Power Coefficient (Cdyn)’ Simplifying the above, we have:
+
+ Pdyn = Cdyn x Voltage^2 x Frequency
+
+The power allocator governor will ask us somehow to reduce our power
+in order to target the sustainable power defined in the device
+tree. So with the idle injection mechanism, we want an average power
+(Ptarget) resulting in an amount of time running at full power on a
+specific OPP and idle another amount of time. That could be put in a
+equation:
+
+ P(opp)target = ((Trunning x (P(opp)running) + (Tidle x P(opp)idle)) /
+			(Trunning + Tidle)
+  ...
+
+ Tidle = Trunning x ((P(opp)running / P(opp)target) - 1)
+
+At this point if we know the running period for the CPU, that gives us
+the idle injection we need. Alternatively if we have the idle
+injection duration, we can compute the running duration with:
+
+ Trunning = Tidle / ((P(opp)running / P(opp)target) - 1)
+
+Practically, if the running power is less than the targeted power, we
+end up with a negative time value, so obviously the equation usage is
+bound to a power reduction, hence a higher OPP is needed to have the
+running power greater than the targeted power.
+
+However, in this demonstration we ignore three aspects:
+
+ * The static leakage is not defined here, we can introduce it in the
+   equation but assuming it will be zero most of the time as it is
+   difficult to get the values from the SoC vendors
+
+ * The idle state wake up latency (or entry + exit latency) is not
+   taken into account, it must be added in the equation in order to
+   rigorously compute the idle injection
+
+ * The injected idle duration must be greater than the idle state
+   target residency, otherwise we end up consuming more energy and
+   potentially invert the mitigation effect
+
+So the final equation is:
+
+ Trunning = (Tidle - Twakeup ) x
+		(((P(opp)dyn + P(opp)static ) - P(opp)target) / P(opp)target )
diff --git a/Documentation/driver-api/thermal/exynos_thermal.rst b/Documentation/driver-api/thermal/exynos_thermal.rst
index 5bd556566c70..764df4ab584d 100644
--- a/Documentation/driver-api/thermal/exynos_thermal.rst
+++ b/Documentation/driver-api/thermal/exynos_thermal.rst
@@ -4,7 +4,7 @@ Kernel driver exynos_tmu
 
 Supported chips:
 
-* ARM SAMSUNG EXYNOS4, EXYNOS5 series of SoC
+* ARM Samsung Exynos4, Exynos5 series of SoC
 
   Datasheet: Not publicly available
 
@@ -14,7 +14,7 @@ Authors: Amit Daniel <amit.daniel@samsung.com>
 TMU controller Description:
 ---------------------------
 
-This driver allows to read temperature inside SAMSUNG EXYNOS4/5 series of SoC.
+This driver allows to read temperature inside Samsung Exynos4/5 series of SoC.
 
 The chip only exposes the measured 8-bit temperature code value
 through a register.
@@ -43,7 +43,7 @@ The three equations are:
        Trimming info for 85 degree Celsius (stored at TRIMINFO register)
        Temperature code measured at 85 degree Celsius which is unchanged
 
-TMU(Thermal Management Unit) in EXYNOS4/5 generates interrupt
+TMU(Thermal Management Unit) in Exynos4/5 generates interrupt
 when temperature exceeds pre-defined levels.
 The maximum number of configurable threshold is five.
 The threshold levels are defined as follows::
@@ -67,7 +67,7 @@ TMU driver description:
 The exynos thermal driver is structured as::
 
 					Kernel Core thermal framework
-				(thermal_core.c, step_wise.c, cpu_cooling.c)
+				(thermal_core.c, step_wise.c, cpufreq_cooling.c)
 								^
 								|
 								|