diff options
| author |   Linus Torvalds <torvalds@linux-foundation.org> | 2021-11-03 16:56:03 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-11-03 16:56:03 -0700 |
| commit | ae45d84fc36d01dcb1007f4298871eec37907904 (patch) | |
| tree | 718d3c1ae88d675af01af6c701e93c34361a0371 /Documentation | |
| parent | Merge tag 'soc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc (diff) | |
| parent | Merge tag 'asahi-soc-dt-5.16-v2' of https://github.com/AsahiLinux/linux into arm/dt (diff) | |
| download | linux-dev-ae45d84fc36d01dcb1007f4298871eec37907904.tar.xz linux-dev-ae45d84fc36d01dcb1007f4298871eec37907904.zip | |
Merge tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC DT updates from Arnd Bergmann:
"This is a rather large update for the ARM devicetree files, after a
few quieter releases, with 775 total commits and 47 branches pulled
into this one.
There are 5 new SoC types plus some minor variations, and a total of
60 new machines, so I'm limiting the summary to the main noteworthy
items:
- Apple M1 gain support for PCI and pinctrl, getting a bit closer to
a usable system out of the box.
- Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as
SM7225, 11 new smartphones, and three additional Chromebooks, and
improvements all over the place.
- Samsung gains support for ExynosAutov9, an automotive version of
their smartphone SoC, but otherwise no major changes.
- Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number
of improvements for the recently added SAMA7 family. The LAN966 SoC
that was added in the platform code does not have dts files yet.
Two board files are added for the older at91sam9g20 SoC
- Aspeed supports two additional server boards using their AST2600 as
BMC, and improves support for qemu models
- Rockchip RK3566/RK3688 gets added, along with six new development
boards using RK3328/RK3399/RK3566, and one Chromebook tablet.
- Two NAS boxes are added using the ARMv4 based Gemini platform
- One new board is added to the Intel Arria SoC FPGA family
- Marvell adds one network switch based on Armada 381 and the new
MOCHAbin 7040 development board
- NXP adds support for the S32G2 automotive SoC, two imx6 based ebook
readers, and three additional development boards, which is notably
less than their usual additions, but they also gain improvements to
their many existing boards
- STmicroelectronics adds their stm32mp13 SoC family along with a
reference board
- Renesas adds new versions of their R-Car Gen3 SoCs and many updates
for their older generations
- Broadcom adds support for a number of Cisco Meraki wireless
controllers, along with two new boards and other updates for
BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards
- Mediatek improves support for the MT81xx SoCs used in Chromebooks
as well as the MT76xx networking SoCs
- NVIDIA adds a number of cleanups and additional support for more
hardware on the already supported machines
- TI K3 adds support for three new boards along with cleanups
- Toshiba adds one board for the Visconti family
- Xilinx adds five new ZynqMP based machines
- Amlogic support is added for the Radxa Zero and two Jethub home
automation controllers, along with changes to other machines
- Rob Herring continues his work on fixing dtc warnings all over the
tree.
- Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
Ux500, Unisoc"
* tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits)
arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address
arm64: dts: apple: t8103: Add root port interrupt routing
arm64: dts: apple: t8103: Add PCIe DARTs
arm64: apple: Add PCIe node
arm64: apple: Add pinctrl nodes
ARM: dts: arm: Update ICST clock nodes 'reg' and node names
ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
arm64: dts: exynos: add chipid node for exynosautov9 SoC
ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node
Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
arm64: dts: qcom: sm8350: Add CPU topology and idle-states
arm64: dts: qcom: Drop unneeded extra device-specific includes
arm64: dts: qcom: msm8916: Drop standalone smem node
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
...
Diffstat (limited to 'Documentation')
43 files changed, 1367 insertions, 621 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 6423377710ee..36081734f720 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -86,6 +86,7 @@ properties: - enum: - amlogic,p281 - oranth,tx3-mini + - jethome,jethub-j80 - const: amlogic,s905w - const: amlogic,meson-gxl @@ -133,6 +134,7 @@ properties: items: - enum: - amlogic,s400 + - jethome,jethub-j100 - const: amlogic,a113d - const: amlogic,meson-axg @@ -141,6 +143,7 @@ properties: - enum: - amediatech,x96-max - amlogic,u200 + - radxa,zero - seirobotics,sei510 - const: amlogic,g12a diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml index aad351706117..c612e1f48dba 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml +++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml @@ -126,6 +126,18 @@ properties: - const: atmel,sama5d3 - const: atmel,sama5 + - description: CalAmp LMU5000 board + items: + - const: calamp,lmu5000 + - const: atmel,at91sam9g20 + - const: atmel,at91sam9 + + - description: Exegin Q5xR5 board + items: + - const: exegin,q5xr5 + - const: atmel,at91sam9g20 + - const: atmel,at91sam9 + - items: - enum: - atmel,sama5d31 diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml index 230b80d9d6cf..5dc48241efb3 100644 --- a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml @@ -19,6 +19,7 @@ properties: items: - enum: - raspberrypi,400 + - raspberrypi,4-compute-module - raspberrypi,4-model-b - const: brcm,bcm2711 diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml index 476bc23a7f75..7d184ba7d180 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml @@ -22,16 +22,61 @@ properties: $nodename: const: '/' compatible: - items: - - enum: - - brcm,bcm58522 - - brcm,bcm58525 - - brcm,bcm58535 - - brcm,bcm58622 - - brcm,bcm58623 - - brcm,bcm58625 - - brcm,bcm88312 - - const: brcm,nsp + oneOf: + - description: BCM58522 based boards + items: + - enum: + - brcm,bcm958522er + - const: brcm,bcm58522 + - const: brcm,nsp + + - description: BCM58525 based boards + items: + - enum: + - brcm,bcm958525er + - brcm,bcm958525xmc + - const: brcm,bcm58525 + - const: brcm,nsp + + - description: BCM58535 based boards + items: + - const: brcm,bcm58535 + - const: brcm,nsp + + - description: BCM58622 based boards + items: + - enum: + - brcm,bcm958622hr + - const: brcm,bcm58622 + - const: brcm,nsp + + - description: BCM58623 based boards + items: + - enum: + - brcm,bcm958623hr + - const: brcm,bcm58623 + - const: brcm,nsp + + - description: BCM58625 based boards + items: + - enum: + - brcm,bcm958625hr + - brcm,bcm958625k + - meraki,mx64 + - meraki,mx64-a0 + - meraki,mx64w + - meraki,mx64w-a0 + - meraki,mx65 + - meraki,mx65w + - const: brcm,bcm58625 + - const: brcm,nsp + + - description: BCM88312 based boards + items: + - enum: + - brcm,bcm988312hr + - const: brcm,bcm88312 + - const: brcm,nsp additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 35b552ce8803..49bbaf1a3ea6 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -171,6 +171,8 @@ properties: - qcom,kryo385 - qcom,kryo468 - qcom,kryo485 + - qcom,kryo560 + - qcom,kryo570 - qcom,kryo685 - qcom,scorpion diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 60f4862ba15e..0b595b26061f 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -235,7 +235,7 @@ properties: - technexion,imx6q-pico-pi # TechNexion i.MX6Q Pico-Pi - technologic,imx6q-ts4900 - technologic,imx6q-ts7970 - - toradex,apalis_imx6q # Apalis iMX6 Module + - toradex,apalis_imx6q # Apalis iMX6 Modules - udoo,imx6q-udoo # Udoo i.MX6 Quad Board - uniwest,imx6q-evi # Uniwest Evi - variscite,dt6customboard @@ -314,18 +314,12 @@ properties: - const: phytec,imx6q-pfla02 # PHYTEC phyFLEX-i.MX6 Quad - const: fsl,imx6q - - description: i.MX6Q Boards with Toradex Apalis iMX6Q/D Module + - description: i.MX6Q Boards with Toradex Apalis iMX6Q/D Modules items: - enum: - - toradex,apalis_imx6q-ixora # Apalis iMX6Q/D Module on Ixora Carrier Board - - toradex,apalis_imx6q-eval # Apalis iMX6Q/D Module on Apalis Evaluation Board - - const: toradex,apalis_imx6q - - const: fsl,imx6q - - - description: i.MX6Q Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1 - items: - - const: toradex,apalis_imx6q-ixora-v1.1 - - const: toradex,apalis_imx6q-ixora + - toradex,apalis_imx6q-ixora # Apalis iMX6Q/D Module on Ixora Carrier Board + - toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6Q/D Module on Ixora V1.1 Carrier Board + - toradex,apalis_imx6q-eval # Apalis iMX6Q/D Module on Apalis Evaluation Board - const: toradex,apalis_imx6q - const: fsl,imx6q @@ -393,6 +387,8 @@ properties: - technexion,imx6dl-pico-pi # TechNexion i.MX6DL Pico-Pi - technologic,imx6dl-ts4900 - technologic,imx6dl-ts7970 + - toradex,colibri_imx6dl # Colibri iMX6 Modules + - toradex,colibri_imx6dl-v1_1 # Colibri iMX6 V1.1 Modules - udoo,imx6dl-udoo # Udoo i.MX6 Dual-lite Board - vdl,lanmcu # Van der Laan LANMCU board - wand,imx6dl-wandboard # Wandboard i.MX6 Dual Lite Board @@ -466,20 +462,18 @@ properties: - const: phytec,imx6dl-pfla02 # PHYTEC phyFLEX-i.MX6 Quad - const: fsl,imx6dl - - description: i.MX6DL Toradex Colibri iMX6 Module on Colibri - Evaluation Board V3 + - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S Modules items: - - const: toradex,colibri_imx6dl-eval-v3 - - const: toradex,colibri_imx6dl # Colibri iMX6 Module + - enum: + - toradex,colibri_imx6dl-eval-v3 # Colibri iMX6DL/S Module on Colibri Evaluation Board V3 + - const: toradex,colibri_imx6dl # Colibri iMX6DL/S Module - const: fsl,imx6dl - - description: i.MX6DL Toradex Colibri iMX6 Module V1.1 on Colibri - Evaluation Board V3 + - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S V1.1 Modules items: - - const: toradex,colibri_imx6dl-v1_1-eval-v3 - - const: toradex,colibri_imx6dl-v1_1 # Colibri iMX6 Module V1.1 - - const: toradex,colibri_imx6dl-eval-v3 - - const: toradex,colibri_imx6dl # Colibri iMX6 Module + - enum: + - toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6DL/S V1.1 M. on Colibri Evaluation Board V3 + - const: toradex,colibri_imx6dl-v1_1 # Colibri iMX6DL/S V1.1 Module - const: fsl,imx6dl - description: i.MX6S DHCOM DRC02 Board @@ -494,6 +488,7 @@ properties: - fsl,imx6sl-evk # i.MX6 SoloLite EVK Board - kobo,tolino-shine2hd - kobo,tolino-shine3 + - kobo,tolino-vision5 - revotics,imx6sl-warp # Revotics WaRP Board - const: fsl,imx6sl @@ -502,6 +497,7 @@ properties: - enum: - fsl,imx6sll-evk - kobo,clarahd + - kobo,librah2o - const: fsl,imx6sll - description: i.MX6SX based Boards @@ -586,8 +582,9 @@ properties: - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board - kontron,imx6ull-n6411-som # Kontron N6411 SOM - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board - - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Eval Board - - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board + - toradex,colibri-imx6ull # Colibri iMX6ULL Modules + - toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module + - toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Modules - const: fsl,imx6ull - description: i.MX6ULL Armadeus Systems OPOS6ULDev Board @@ -605,6 +602,27 @@ properties: - const: phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL - const: fsl,imx6ull + - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Modules + items: + - enum: + - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board + - const: toradex,colibri-imx6ull # Colibri iMX6ULL Module + - const: fsl,imx6dl + + - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL 1GB (eMMC) Module + items: + - enum: + - toradex,colibri-imx6ull-emmc-eval # Colibri iMX6ULL 1GB (eMMC) M. on Colibri Evaluation Board + - const: toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module + - const: fsl,imx6dl + + - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Wi-Fi / BT Modules + items: + - enum: + - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT M. on Colibri Evaluation Board + - const: toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Module + - const: fsl,imx6dl + - description: Kontron N6411 S Board items: - const: kontron,imx6ull-n6411-s @@ -622,6 +640,7 @@ properties: items: - enum: - element14,imx7s-warp # Element14 Warp i.MX7 Board + - toradex,colibri-imx7s # Colibri iMX7S Module - const: fsl,imx7s - description: i.MX7S Boards with Toradex Colibri iMX7S Module @@ -653,15 +672,8 @@ properties: - technexion,imx7d-pico-hobbit # TechNexion i.MX7D Pico-Hobbit - technexion,imx7d-pico-nymph # TechNexion i.MX7D Pico-Nymph - technexion,imx7d-pico-pi # TechNexion i.MX7D Pico-Pi - - toradex,colibri-imx7d # Colibri iMX7 Dual Module - - toradex,colibri-imx7d-aster # Colibri iMX7 Dual Module on Aster Carrier Board - - toradex,colibri-imx7d-emmc # Colibri iMX7 Dual 1GB (eMMC) Module - - toradex,colibri-imx7d-emmc-aster # Colibri iMX7 Dual 1GB (eMMC) Module on - # Aster Carrier Board - - toradex,colibri-imx7d-emmc-eval-v3 # Colibri iMX7 Dual 1GB (eMMC) Module on - # Colibri Evaluation Board V3 - - toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on - # Colibri Evaluation Board V3 + - toradex,colibri-imx7d # Colibri iMX7D Module + - toradex,colibri-imx7d-emmc # Colibri iMX7D 1GB (eMMC) Module - zii,imx7d-rmu2 # ZII RMU2 Board - zii,imx7d-rpu2 # ZII RPU2 Board - const: fsl,imx7d @@ -686,12 +698,12 @@ properties: - description: i.MX7D Boards with Toradex Colibri i.MX7D Module items: - enum: - - toradex,colibri-imx7d-aster # Module on Aster Carrier Board - - toradex,colibri-imx7d-eval-v3 # Module on Colibri Evaluation Board V3 + - toradex,colibri-imx7d-aster # Colibri iMX7D Module on Aster Carrier Board + - toradex,colibri-imx7d-eval-v3 # Colibri iMX7D Module on Colibri Evaluation Board V3 - const: toradex,colibri-imx7d - const: fsl,imx7d - - description: i.MX7D Boards with Toradex Colibri i.MX7D eMMC Module + - description: i.MX7D Boards with Toradex Colibri i.MX7D 1GB (eMMC) Module items: - enum: - toradex,colibri-imx7d-emmc-aster # Module on Aster Carrier Board @@ -812,10 +824,10 @@ properties: - enum: - einfochips,imx8qxp-ai_ml # i.MX8QXP AI_ML Board - fsl,imx8qxp-mek # i.MX8QXP MEK Board - - toradex,colibri-imx8x # Colibri iMX8X Module + - toradex,colibri-imx8x # Colibri iMX8X Modules - const: fsl,imx8qxp - - description: Toradex Colibri i.MX8 Evaluation Board + - description: i.MX8QXP Boards with Toradex Coilbri iMX8X Modules items: - enum: - toradex,colibri-imx8x-eval-v3 # Colibri iMX8X Module on Colibri Evaluation Board V3 @@ -847,9 +859,10 @@ properties: - description: VF610 based Boards items: - enum: + - fsl,vf610-twr # VF610 Tower Board - lwn,bk4 # Liebherr BK4 controller - phytec,vf610-cosmic # PHYTEC Cosmic/Cosmic+ Board - - fsl,vf610-twr # VF610 Tower Board + - toradex,vf610-colibri_vf61 # Colibri VF61 Modules - const: fsl,vf610 - description: Toradex Colibri VF61 Module on Colibri Evaluation Board @@ -886,6 +899,7 @@ properties: - enum: - fsl,ls1021a-moxa-uc-8410a - fsl,ls1021a-qds + - fsl,ls1021a-tsn - fsl,ls1021a-twr - const: fsl,ls1021a @@ -977,6 +991,8 @@ properties: - description: LX2160A based Boards items: - enum: + - fsl,lx2160a-bluebox3 + - fsl,lx2160a-bluebox3-rev-a - fsl,lx2160a-qds - fsl,lx2160a-rdb - fsl,lx2162a-qds @@ -990,6 +1006,13 @@ properties: - const: solidrun,lx2160a-cex7 - const: fsl,lx2160a + - description: S32G2 based Boards + items: + - enum: + - nxp,s32g274a-evb + - nxp,s32g274a-rdb2 + - const: nxp,s32g2 + - description: S32V234 based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index 80a05f6fee85..0fa55497b96f 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -32,6 +32,7 @@ properties: - const: mediatek,mt6580 - items: - enum: + - fairphone,fp1 - mundoreader,bq-aquaris5 - const: mediatek,mt6589 - items: diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml index f9ffa5b703a5..763c62323a74 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml @@ -43,6 +43,9 @@ properties: "#clock-cells": const: 1 + '#reset-cells': + const: 1 + required: - compatible - reg @@ -56,4 +59,5 @@ examples: compatible = "mediatek,mt8173-mmsys", "syscon"; reg = <0x14000000 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 880ddafc634e..c8808e0f9e64 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -25,6 +25,7 @@ description: | The 'SoC' element must be one of the following strings: apq8016 + apq8026 apq8074 apq8084 apq8096 @@ -44,6 +45,8 @@ description: | sdm660 sdm845 sdx55 + sdx65 + sm7225 sm8150 sm8250 sm8350 @@ -94,6 +97,14 @@ properties: - items: - enum: + - lg,lenok + - const: qcom,apq8026 + + - items: + - enum: + - asus,nexus7-flo + - lg,nexus4-mako + - sony,xperia-yuga - qcom,apq8064-cm-qs600 - qcom,apq8064-ifc6410 - const: qcom,apq8064 @@ -129,6 +140,7 @@ properties: - enum: - fairphone,fp2 - lge,hammerhead + - samsung,klte - sony,xperia-amami - sony,xperia-castor - sony,xperia-honami @@ -163,6 +175,7 @@ properties: - items: - enum: + - qcom,ipq4019-ap-dk01.1-c1 - qcom,ipq4019-ap-dk04.1-c3 - qcom,ipq4019-ap-dk07.1-c1 - qcom,ipq4019-ap-dk07.1-c2 @@ -208,6 +221,11 @@ properties: - items: - enum: + - qcom,sdx65-mtp + - const: qcom,sdx65 + + - items: + - enum: - qcom,ipq6018-cp01 - qcom,ipq6018-cp01-c1 - const: qcom,ipq6018 @@ -219,6 +237,11 @@ properties: - items: - enum: + - fairphone,fp4 + - const: qcom,sm7225 + + - items: + - enum: - qcom,sm8150-mtp - const: qcom,sm8150 diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml index 8a11918866b8..517206507801 100644 --- a/Documentation/devicetree/bindings/arm/renesas.yaml +++ b/Documentation/devicetree/bindings/arm/renesas.yaml @@ -255,12 +255,19 @@ properties: - enum: - renesas,h3ulcb - renesas,m3ulcb + - renesas,m3nulcb - enum: + - renesas,r8a779m0 - renesas,r8a779m1 + - renesas,r8a779m2 - renesas,r8a779m3 + - renesas,r8a779m4 + - renesas,r8a779m5 + - renesas,r8a779m8 - enum: - renesas,r8a7795 - renesas,r8a77961 + - renesas,r8a77965 - description: R-Car M3-N (R8A77965) items: @@ -308,6 +315,14 @@ properties: - const: renesas,falcon-cpu - const: renesas,r8a779a0 + - description: R-Car H3e (R8A779M0) + items: + - enum: + - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m0 + - const: renesas,r8a7795 + - description: R-Car H3e-2G (R8A779M1) items: - enum: @@ -316,6 +331,14 @@ properties: - const: renesas,r8a779m1 - const: renesas,r8a7795 + - description: R-Car M3e (R8A779M2) + items: + - enum: + - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m2 + - const: renesas,r8a77961 + - description: R-Car M3e-2G (R8A779M3) items: - enum: @@ -324,6 +347,44 @@ properties: - const: renesas,r8a779m3 - const: renesas,r8a77961 + - description: R-Car M3Ne (R8A779M4) + items: + - enum: + - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m4 + - const: renesas,r8a77965 + + - description: R-Car M3Ne-2G (R8A779M5) + items: + - enum: + - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m5 + - const: renesas,r8a77965 + + - description: R-Car E3e (R8A779M6) + items: + - enum: + - renesas,ebisu # Ebisu + - const: renesas,r8a779m6 + - const: renesas,r8a77990 + + - description: R-Car D3e (R8A779M7) + items: + - enum: + - renesas,draak # Draak + - const: renesas,r8a779m7 + - const: renesas,r8a77995 + + - description: R-Car H3Ne (R8A779M8) + items: + - enum: + - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m8 + - const: renesas,r8a7795 + - description: RZ/N1D (R9A06G032) items: - enum: diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 6546b015fc62..4aed16176434 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -115,6 +115,11 @@ properties: - const: firefly,roc-rk3328-cc - const: rockchip,rk3328 + - description: Firefly ROC-RK3328-PC + items: + - const: firefly,roc-rk3328-pc + - const: rockchip,rk3328 + - description: Firefly ROC-RK3399-PC items: - enum: @@ -122,6 +127,12 @@ properties: - firefly,roc-rk3399-pc-mezzanine - const: rockchip,rk3399 + - description: Firefly ROC-RK3399-PC-PLUS + items: + - enum: + - firefly,roc-rk3399-pc-plus + - const: rockchip,rk3399 + - description: FriendlyElec NanoPi R2S items: - const: friendlyarm,nanopi-r2s @@ -287,6 +298,34 @@ properties: - const: google,veyron - const: rockchip,rk3288 + - description: Google Scarlet - Dumo (ASUS Chromebook Tablet CT100) + items: + - const: google,scarlet-rev15-sku0 + - const: google,scarlet-rev15 + - const: google,scarlet-rev14-sku0 + - const: google,scarlet-rev14 + - const: google,scarlet-rev13-sku0 + - const: google,scarlet-rev13 + - const: google,scarlet-rev12-sku0 + - const: google,scarlet-rev12 + - const: google,scarlet-rev11-sku0 + - const: google,scarlet-rev11 + - const: google,scarlet-rev10-sku0 + - const: google,scarlet-rev10 + - const: google,scarlet-rev9-sku0 + - const: google,scarlet-rev9 + - const: google,scarlet-rev8-sku0 + - const: google,scarlet-rev8 + - const: google,scarlet-rev7-sku0 + - const: google,scarlet-rev7 + - const: google,scarlet-rev6-sku0 + - const: google,scarlet-rev6 + - const: google,scarlet-rev5-sku0 + - const: google,scarlet-rev5 + - const: google,scarlet + - const: google,gru + - const: rockchip,rk3399 + - description: Google Scarlet - Kingdisplay (Acer Chromebook Tab 10) items: - const: google,scarlet-rev15-sku7 @@ -455,16 +494,23 @@ properties: - const: pine64,rockpro64 - const: rockchip,rk3399 + - description: Pine64 Quartz64 Model A + items: + - const: pine64,quartz64-a + - const: rockchip,rk3566 + - description: Radxa Rock items: - const: radxa,rock - const: rockchip,rk3188 - - description: Radxa ROCK Pi 4A/B/C + - description: Radxa ROCK Pi 4A/A+/B/B+/C items: - enum: - radxa,rockpi4a + - radxa,rockpi4a-plus - radxa,rockpi4b + - radxa,rockpi4b-plus - radxa,rockpi4c - const: radxa,rockpi4 - const: rockchip,rk3399 diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml index 53115b92d17f..5ece38065e54 100644 --- a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml @@ -22,7 +22,9 @@ select: - rockchip,px30-pmu - rockchip,rk3066-pmu - rockchip,rk3288-pmu + - rockchip,rk3368-pmu - rockchip,rk3399-pmu + - rockchip,rk3568-pmu required: - compatible @@ -34,7 +36,9 @@ properties: - rockchip,px30-pmu - rockchip,rk3066-pmu - rockchip,rk3288-pmu + - rockchip,rk3368-pmu - rockchip,rk3399-pmu + - rockchip,rk3568-pmu - const: syscon - const: simple-mfd diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml index 0796f0c87727..ef6dc14be4b5 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml @@ -199,6 +199,12 @@ properties: - samsung,exynos7-espresso # Samsung Exynos7 Espresso - const: samsung,exynos7 + - description: Exynos Auto v9 based boards + items: + - enum: + - samsung,exynosautov9-sadk # Samsung Exynos Auto v9 SADK + - const: samsung,exynosautov9 + required: - compatible diff --git a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml index 7b6ae3070396..2c12e571394b 100644 --- a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml +++ b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml @@ -30,6 +30,11 @@ properties: - sprd,sp9863a-1h10 - const: sprd,sc9863a + - items: + - enum: + - sprd,ums512-1h10 + - const: sprd,ums512 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 9a77ab74be99..9ac7da01c6c3 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -57,6 +57,10 @@ properties: - const: st,stm32h750 - items: - enum: + - st,stm32mp135f-dk + - const: st,stm32mp135 + - items: + - enum: - shiratech,stm32mp157a-iot-box # IoT Box - shiratech,stm32mp157a-stinger96 # Stinger96 - st,stm32mp157c-ed1 diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml index e713a6fe4cf7..29c9961ee2d8 100644 --- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml @@ -30,6 +30,7 @@ properties: enum: - allwinner,sun5i-a13-mbus - allwinner,sun8i-h3-mbus + - allwinner,sun8i-r40-mbus - allwinner,sun50i-a64-mbus reg: diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml new file mode 100644 index 000000000000..f3878e0b3cc4 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner CPU Configuration Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + enum: + - allwinner,sun6i-a31-cpuconfig + - allwinner,sun8i-a23-cpuconfig + - allwinner,sun8i-a83t-cpucfg + - allwinner,sun8i-a83t-r-cpucfg + - allwinner,sun9i-a80-cpucfg + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + cpucfg@1f01c00 { + compatible = "allwinner,sun6i-a31-cpuconfig"; + reg = <0x01f01c00 0x300>; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml new file mode 100644 index 000000000000..668aadbfe4c0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun9i-a80-prcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 PRCM Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + const: allwinner,sun9i-a80-prcm + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + prcm@8001400 { + compatible = "allwinner,sun9i-a80-prcm"; + reg = <0x08001400 0x200>; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index c5aa362e4026..cf327230fc0e 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -24,16 +24,27 @@ properties: - enum: - ti,am654-evm - siemens,iot2050-basic + - siemens,iot2050-basic-pg2 - siemens,iot2050-advanced + - siemens,iot2050-advanced-pg2 - const: ti,am654 - description: K3 J721E SoC - items: + oneOf: - const: ti,j721e + - items: + - enum: + - ti,j721e-evm + - ti,j721e-sk + - const: ti,j721e - description: K3 J7200 SoC - items: + oneOf: - const: ti,j7200 + - items: + - enum: + - ti,j7200-evm + - const: ti,j7200 - description: K3 AM642 SoC items: diff --git a/Documentation/devicetree/bindings/arm/toshiba.yaml b/Documentation/devicetree/bindings/arm/toshiba.yaml index 001bbbcd1432..9c1cacbdc916 100644 --- a/Documentation/devicetree/bindings/arm/toshiba.yaml +++ b/Documentation/devicetree/bindings/arm/toshiba.yaml @@ -18,6 +18,7 @@ properties: items: - enum: - toshiba,tmpv7708-rm-mbrc # TMPV7708 RM main board + - toshiba,tmpv7708-visrobo-vrb # TMPV7708 VisROBO VRB board - const: toshiba,tmpv7708 additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml index f52c7e8ce654..4dc0e0195974 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.yaml +++ b/Documentation/devicetree/bindings/arm/xilinx.yaml @@ -87,6 +87,7 @@ properties: - xlnx,zynqmp-zcu102-revA - xlnx,zynqmp-zcu102-revB - xlnx,zynqmp-zcu102-rev1.0 + - xlnx,zynqmp-zcu102-rev1.1 - const: xlnx,zynqmp-zcu102 - const: xlnx,zynqmp @@ -115,6 +116,22 @@ properties: - const: xlnx,zynqmp-zcu111 - const: xlnx,zynqmp + - description: Xilinx Kria SOMs + items: + - const: xlnx,zynqmp-sm-k26-rev1 + - const: xlnx,zynqmp-sm-k26-revB + - const: xlnx,zynqmp-sm-k26-revA + - const: xlnx,zynqmp-sm-k26 + - const: xlnx,zynqmp + + - description: Xilinx Kria SOMs (starter) + items: + - const: xlnx,zynqmp-smk-k26-rev1 + - const: xlnx,zynqmp-smk-k26-revB + - const: xlnx,zynqmp-smk-k26-revA + - const: xlnx,zynqmp-smk-k26 + - const: xlnx,zynqmp + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml index 32608578a352..c8b2459d64f6 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml @@ -47,6 +47,9 @@ properties: interrupts: maxItems: 1 + power-domains: + maxItems: 1 + required: - "#clock-cells" - compatible diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml index 031e35e76db2..48c8cad0d96d 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml @@ -51,6 +51,9 @@ properties: dma-names: const: audio-rx + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml index 8a73780f573d..c55a8217de25 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml @@ -24,6 +24,9 @@ properties: interrupts: maxItems: 1 + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml index 9b24081a0dbd..5d921e30394e 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml @@ -24,6 +24,9 @@ properties: interrupts: maxItems: 1 + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt index d30428b9fb33..36b01458f45c 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt @@ -19,6 +19,11 @@ Required properties: Documentation/devicetree/bindings/graph.txt. This port should be connected to the input port of an attached DSI panel or DSI-to-eDP encoder chip. +Optional properties: +- resets: list of phandle + reset specifier pair, as described in [1]. + +[1] Documentation/devicetree/bindings/reset/reset.txt + MIPI TX Configuration Module ============================ @@ -45,6 +50,7 @@ dsi0: dsi@1401b000 { clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>, <&mipi_tx0>; clock-names = "engine", "digital", "hs"; + resets = <&mmsys MT8173_MMSYS_SW0_RST_B_DISP_DSI0>; phys = <&mipi_tx0>; phy-names = "dphy"; diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml new file mode 100644 index 000000000000..3cf862976448 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvdec.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Device tree binding for NVIDIA Tegra NVDEC + +description: | + NVDEC is the hardware video decoder present on NVIDIA Tegra210 + and newer chips. It is located on the Host1x bus and typically + programmed through Host1x channels. + +maintainers: + - Thierry Reding <treding@gmail.com> + - Mikko Perttunen <mperttunen@nvidia.com> + +properties: + $nodename: + pattern: "^nvdec@[0-9a-f]*$" + + compatible: + enum: + - nvidia,tegra210-nvdec + - nvidia,tegra186-nvdec + - nvidia,tegra194-nvdec + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: nvdec + + resets: + maxItems: 1 + + reset-names: + items: + - const: nvdec + + power-domains: + maxItems: 1 + + iommus: + maxItems: 1 + + dma-coherent: true + + interconnects: + items: + - description: DMA read memory client + - description: DMA read 2 memory client + - description: DMA write memory client + + interconnect-names: + items: + - const: dma-mem + - const: read-1 + - const: write + + nvidia,host1x-class: + description: | + Host1x class of the engine, used to specify the targeted engine + when programming the engine through Host1x channels or when + configuring engine-specific behavior in Host1x. + default: 0xf0 + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra186-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/tegra186-mc.h> + #include <dt-bindings/power/tegra186-powergate.h> + #include <dt-bindings/reset/tegra186-reset.h> + + nvdec@15480000 { + compatible = "nvidia,tegra186-nvdec"; + reg = <0x15480000 0x40000>; + clocks = <&bpmp TEGRA186_CLK_NVDEC>; + clock-names = "nvdec"; + resets = <&bpmp TEGRA186_RESET_NVDEC>; + reset-names = "nvdec"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVDEC>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD1 &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVDECSWR &emc>; + interconnect-names = "dma-mem", "read-1", "write"; + iommus = <&smmu TEGRA186_SID_NVDEC>; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt b/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt deleted file mode 100644 index c1359f4d48d7..000000000000 --- a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt +++ /dev/null @@ -1,157 +0,0 @@ -Device tree bindings for OMAP general purpose memory controllers (GPMC) - -The actual devices are instantiated from the child nodes of a GPMC node. - -Required properties: - - - compatible: Should be set to one of the following: - - ti,omap2420-gpmc (omap2420) - ti,omap2430-gpmc (omap2430) - ti,omap3430-gpmc (omap3430 & omap3630) - ti,omap4430-gpmc (omap4430 & omap4460 & omap543x) - ti,am3352-gpmc (am335x devices) - - - reg: A resource specifier for the register space - (see the example below) - - ti,hwmods: Should be set to "ti,gpmc" until the DT transition is - completed. - - #address-cells: Must be set to 2 to allow memory address translation - - #size-cells: Must be set to 1 to allow CS address passing - - gpmc,num-cs: The maximum number of chip-select lines that controller - can support. - - gpmc,num-waitpins: The maximum number of wait pins that controller can - support. - - ranges: Must be set up to reflect the memory layout with four - integer values for each chip-select line in use: - - <cs-number> 0 <physical address of mapping> <size> - - Currently, calculated values derived from the contents - of the per-CS register GPMC_CONFIG7 (as set up by the - bootloader) are used for the physical address decoding. - As this will change in the future, filling correct - values here is a requirement. - - interrupt-controller: The GPMC driver implements and interrupt controller for - the NAND events "fifoevent" and "termcount" plus the - rising/falling edges on the GPMC_WAIT pins. - The interrupt number mapping is as follows - 0 - NAND_fifoevent - 1 - NAND_termcount - 2 - GPMC_WAIT0 pin edge - 3 - GPMC_WAIT1 pin edge, and so on. - - interrupt-cells: Must be set to 2 - - gpio-controller: The GPMC driver implements a GPIO controller for the - GPMC WAIT pins that can be used as general purpose inputs. - 0 maps to GPMC_WAIT0 pin. - - gpio-cells: Must be set to 2 - -Required properties when using NAND prefetch dma: - - dmas GPMC NAND prefetch dma channel - - dma-names Must be set to "rxtx" - -Timing properties for child nodes. All are optional and default to 0. - - - gpmc,sync-clk-ps: Minimum clock period for synchronous mode, in picoseconds - - Chip-select signal timings (in nanoseconds) corresponding to GPMC_CONFIG2: - - gpmc,cs-on-ns: Assertion time - - gpmc,cs-rd-off-ns: Read deassertion time - - gpmc,cs-wr-off-ns: Write deassertion time - - ADV signal timings (in nanoseconds) corresponding to GPMC_CONFIG3: - - gpmc,adv-on-ns: Assertion time - - gpmc,adv-rd-off-ns: Read deassertion time - - gpmc,adv-wr-off-ns: Write deassertion time - - gpmc,adv-aad-mux-on-ns: Assertion time for AAD - - gpmc,adv-aad-mux-rd-off-ns: Read deassertion time for AAD - - gpmc,adv-aad-mux-wr-off-ns: Write deassertion time for AAD - - WE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4: - - gpmc,we-on-ns Assertion time - - gpmc,we-off-ns: Deassertion time - - OE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4: - - gpmc,oe-on-ns: Assertion time - - gpmc,oe-off-ns: Deassertion time - - gpmc,oe-aad-mux-on-ns: Assertion time for AAD - - gpmc,oe-aad-mux-off-ns: Deassertion time for AAD - - Access time and cycle time timings (in nanoseconds) corresponding to - GPMC_CONFIG5: - - gpmc,page-burst-access-ns: Multiple access word delay - - gpmc,access-ns: Start-cycle to first data valid delay - - gpmc,rd-cycle-ns: Total read cycle time - - gpmc,wr-cycle-ns: Total write cycle time - - gpmc,bus-turnaround-ns: Turn-around time between successive accesses - - gpmc,cycle2cycle-delay-ns: Delay between chip-select pulses - - gpmc,clk-activation-ns: GPMC clock activation time - - gpmc,wait-monitoring-ns: Start of wait monitoring with regard to valid - data - -Boolean timing parameters. If property is present parameter enabled and -disabled if omitted: - - gpmc,adv-extra-delay: ADV signal is delayed by half GPMC clock - - gpmc,cs-extra-delay: CS signal is delayed by half GPMC clock - - gpmc,cycle2cycle-diffcsen: Add "cycle2cycle-delay" between successive - accesses to a different CS - - gpmc,cycle2cycle-samecsen: Add "cycle2cycle-delay" between successive - accesses to the same CS - - gpmc,oe-extra-delay: OE signal is delayed by half GPMC clock - - gpmc,we-extra-delay: WE signal is delayed by half GPMC clock - - gpmc,time-para-granularity: Multiply all access times by 2 - -The following are only applicable to OMAP3+ and AM335x: - - gpmc,wr-access-ns: In synchronous write mode, for single or - burst accesses, defines the number of - GPMC_FCLK cycles from start access time - to the GPMC_CLK rising edge used by the - memory device for the first data capture. - - gpmc,wr-data-mux-bus-ns: In address-data multiplex mode, specifies - the time when the first data is driven on - the address-data bus. - -GPMC chip-select settings properties for child nodes. All are optional. - -- gpmc,burst-length Page/burst length. Must be 4, 8 or 16. -- gpmc,burst-wrap Enables wrap bursting -- gpmc,burst-read Enables read page/burst mode -- gpmc,burst-write Enables write page/burst mode -- gpmc,device-width Total width of device(s) connected to a GPMC - chip-select in bytes. The GPMC supports 8-bit - and 16-bit devices and so this property must be - 1 or 2. -- gpmc,mux-add-data Address and data multiplexing configuration. - Valid values are 1 for address-address-data - multiplexing mode and 2 for address-data - multiplexing mode. -- gpmc,sync-read Enables synchronous read. Defaults to asynchronous - is this is not set. -- gpmc,sync-write Enables synchronous writes. Defaults to asynchronous - is this is not set. -- gpmc,wait-pin Wait-pin used by client. Must be less than - "gpmc,num-waitpins". -- gpmc,wait-on-read Enables wait monitoring on reads. -- gpmc,wait-on-write Enables wait monitoring on writes. - -Example for an AM33xx board: - - gpmc: gpmc@50000000 { - compatible = "ti,am3352-gpmc"; - ti,hwmods = "gpmc"; - reg = <0x50000000 0x2000>; - interrupts = <100>; - dmas = <&edma 52 0>; - dma-names = "rxtx"; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <2>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */ - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - - /* child nodes go here */ - }; diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml new file mode 100644 index 000000000000..6e3995bb1630 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml @@ -0,0 +1,245 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc-child.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: device tree bindings for children of the Texas Instruments GPMC + +maintainers: + - Tony Lindgren <tony@atomide.com> + - Roger Quadros <rogerq@kernel.org> + +description: + This binding is meant for the child nodes of the GPMC node. The node + represents any device connected to the GPMC bus. It may be a Flash chip, + RAM chip or Ethernet controller, etc. These properties are meant for + configuring the GPMC settings/timings and will accompany the bindings + supported by the respective device. + +properties: + reg: true + +# GPMC Timing properties for child nodes. All are optional and default to 0. + gpmc,sync-clk-ps: + description: Minimum clock period for synchronous mode + default: 0 + +# Chip-select signal timings corresponding to GPMC_CONFIG2: + gpmc,cs-on-ns: + description: Assertion time + default: 0 + + gpmc,cs-rd-off-ns: + description: Read deassertion time + default: 0 + + gpmc,cs-wr-off-ns: + description: Write deassertion time + default: 0 + +# ADV signal timings corresponding to GPMC_CONFIG3: + gpmc,adv-on-ns: + description: Assertion time + default: 0 + + gpmc,adv-rd-off-ns: + description: Read deassertion time + default: 0 + + gpmc,adv-wr-off-ns: + description: Write deassertion time + default: 0 + + gpmc,adv-aad-mux-on-ns: + description: Assertion time for AAD + default: 0 + + gpmc,adv-aad-mux-rd-off-ns: + description: Read deassertion time for AAD + default: 0 + + gpmc,adv-aad-mux-wr-off-ns: + description: Write deassertion time for AAD + default: 0 + +# WE signals timings corresponding to GPMC_CONFIG4: + gpmc,we-on-ns: + description: Assertion time + default: 0 + + gpmc,we-off-ns: + description: Deassertion time + default: 0 + +# OE signals timings corresponding to GPMC_CONFIG4: + gpmc,oe-on-ns: + description: Assertion time + default: 0 + + gpmc,oe-off-ns: + description: Deassertion time + default: 0 + + gpmc,oe-aad-mux-on-ns: + description: Assertion time for AAD + default: 0 + + gpmc,oe-aad-mux-off-ns: + description: Deassertion time for AAD + default: 0 + +# Access time and cycle time timings (in nanoseconds) corresponding to +# GPMC_CONFIG5: + gpmc,page-burst-access-ns: + description: Multiple access word delay + default: 0 + + gpmc,access-ns: + description: Start-cycle to first data valid delay + default: 0 + + gpmc,rd-cycle-ns: + description: Total read cycle time + default: 0 + + gpmc,wr-cycle-ns: + description: Total write cycle time + default: 0 + + gpmc,bus-turnaround-ns: + description: Turn-around time between successive accesses + default: 0 + + gpmc,cycle2cycle-delay-ns: + description: Delay between chip-select pulses + default: 0 + + gpmc,clk-activation-ns: + description: GPMC clock activation time + default: 0 + + gpmc,wait-monitoring-ns: + description: Start of wait monitoring with regard to valid data + default: 0 + +# Boolean timing parameters. If property is present, parameter is enabled +# otherwise disabled. + gpmc,adv-extra-delay: + description: ADV signal is delayed by half GPMC clock + type: boolean + + gpmc,cs-extra-delay: + description: CS signal is delayed by half GPMC clock + type: boolean + + gpmc,cycle2cycle-diffcsen: + description: | + Add "cycle2cycle-delay" between successive accesses + to a different CS + type: boolean + + gpmc,cycle2cycle-samecsen: + description: | + Add "cycle2cycle-delay" between successive accesses + to the same CS + type: boolean + + gpmc,oe-extra-delay: + description: OE signal is delayed by half GPMC clock + type: boolean + + gpmc,we-extra-delay: + description: WE signal is delayed by half GPMC clock + type: boolean + + gpmc,time-para-granularity: + description: Multiply all access times by 2 + type: boolean + +# The following two properties are applicable only to OMAP3+ and AM335x: + gpmc,wr-access-ns: + description: | + In synchronous write mode, for single or + burst accesses, defines the number of + GPMC_FCLK cycles from start access time + to the GPMC_CLK rising edge used by the + memory device for the first data capture. + default: 0 + + gpmc,wr-data-mux-bus-ns: + description: | + In address-data multiplex mode, specifies + the time when the first data is driven on + the address-data bus. + default: 0 + +# GPMC chip-select settings properties for child nodes. All are optional. + gpmc,burst-length: + description: Page/burst length. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 4, 8, 16] + default: 0 + + gpmc,burst-wrap: + description: Enables wrap bursting + type: boolean + + gpmc,burst-read: + description: Enables read page/burst mode + type: boolean + + gpmc,burst-write: + description: Enables write page/burst mode + type: boolean + + gpmc,device-width: + description: | + Total width of device(s) connected to a GPMC + chip-select in bytes. The GPMC supports 8-bit + and 16-bit devices and so this property must be + 1 or 2. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + default: 1 + + gpmc,mux-add-data: + description: | + Address and data multiplexing configuration. + Valid values are + 0 for Non multiplexed mode + 1 for address-address-data multiplexing mode and + 2 for address-data multiplexing mode. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + gpmc,sync-read: + description: | + Enables synchronous read. Defaults to asynchronous + is this is not set. + type: boolean + + gpmc,sync-write: + description: | + Enables synchronous writes. Defaults to asynchronous + is this is not set. + type: boolean + + gpmc,wait-pin: + description: | + Wait-pin used by client. Must be less than "gpmc,num-waitpins". + $ref: /schemas/types.yaml#/definitions/uint32 + + gpmc,wait-on-read: + description: Enables wait monitoring on reads. + type: boolean + + gpmc,wait-on-write: + description: Enables wait monitoring on writes. + type: boolean + +required: + - reg + +# the GPMC child will have its own native properties +additionalProperties: true diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml new file mode 100644 index 000000000000..25b42d68f9b3 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml @@ -0,0 +1,172 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments GPMC Memory Controller device-tree bindings + +maintainers: + - Tony Lindgren <tony@atomide.com> + - Roger Quadros <rogerq@kernel.org> + +description: + The GPMC is a unified memory controller dedicated for interfacing + with external memory devices like + - Asynchronous SRAM-like memories and ASICs + - Asynchronous, synchronous, and page mode burst NOR flash + - NAND flash + - Pseudo-SRAM devices + +properties: + compatible: + items: + - enum: + - ti,am3352-gpmc + - ti,omap2420-gpmc + - ti,omap2430-gpmc + - ti,omap3430-gpmc + - ti,omap4430-gpmc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: | + Functional clock. Used for bus timing calculations and + GPMC configuration. + + clock-names: + items: + - const: fck + + dmas: + items: + - description: DMA channel for GPMC NAND prefetch + + dma-names: + items: + - const: rxtx + + "#address-cells": true + + "#size-cells": true + + gpmc,num-cs: + description: maximum number of supported chip-select lines. + $ref: /schemas/types.yaml#/definitions/uint32 + + gpmc,num-waitpins: + description: maximum number of supported wait pins. + $ref: /schemas/types.yaml#/definitions/uint32 + + ranges: + minItems: 1 + description: | + Must be set up to reflect the memory layout with four + integer values for each chip-select line in use, + <cs-number> 0 <physical address of mapping> <size> + items: + - description: NAND bank 0 + - description: NOR/SRAM bank 0 + - description: NOR/SRAM bank 1 + + '#interrupt-cells': + const: 2 + + interrupt-controller: + description: | + The GPMC driver implements and interrupt controller for + the NAND events "fifoevent" and "termcount" plus the + rising/falling edges on the GPMC_WAIT pins. + The interrupt number mapping is as follows + 0 - NAND_fifoevent + 1 - NAND_termcount + 2 - GPMC_WAIT0 pin edge + 3 - GPMC_WAIT1 pin edge, and so on. + + '#gpio-cells': + const: 2 + + gpio-controller: + description: | + The GPMC driver implements a GPIO controller for the + GPMC WAIT pins that can be used as general purpose inputs. + 0 maps to GPMC_WAIT0 pin. + + ti,hwmods: + description: + Name of the HWMOD associated with GPMC. This is for legacy + omap2/3 platforms only. + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + + ti,no-idle-on-init: + description: + Prevent idling the module at init. This is for legacy omap2/3 + platforms only. + type: boolean + deprecated: true + +patternProperties: + "@[0-7],[a-f0-9]+$": + type: object + description: | + The child device node represents the device connected to the GPMC + bus. The device can be a NAND chip, SRAM device, NOR device + or an ASIC. + + allOf: + - $ref: "ti,gpmc-child.yaml" + + unevaluatedProperties: false + +required: + - compatible + - reg + - gpmc,num-cs + - gpmc,num-waitpins + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + + gpmc: memory-controller@50000000 { + compatible = "ti,am3352-gpmc"; + reg = <0x50000000 0x2000>; + interrupts = <100>; + clocks = <&l3s_clkctrl>; + clock-names = "fck"; + dmas = <&edma 52 0>; + dma-names = "rxtx"; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */ + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + ti,nand-xfer-type = "prefetch-dma"; + ti,nand-ecc-opt = "bch16"; + ti,elm-id = <&elm>; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */ + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt deleted file mode 100644 index c459f169a904..000000000000 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ /dev/null @@ -1,147 +0,0 @@ -Device tree bindings for GPMC connected NANDs - -GPMC connected NAND (found on OMAP boards) are represented as child nodes of -the GPMC controller with a name of "nand". - -All timing relevant properties as well as generic gpmc child properties are -explained in a separate documents - please refer to -Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt - -For NAND specific properties such as ECC modes or bus width, please refer to -Documentation/devicetree/bindings/mtd/nand-controller.yaml - - -Required properties: - - - compatible: "ti,omap2-nand" - - reg: range id (CS number), base offset and length of the - NAND I/O space - - interrupts: Two interrupt specifiers, one for fifoevent, one for termcount. - -Optional properties: - - - nand-bus-width: Set this numeric value to 16 if the hardware - is wired that way. If not specified, a bus - width of 8 is assumed. - - - ti,nand-ecc-opt: A string setting the ECC layout to use. One of: - "sw" 1-bit Hamming ecc code via software - "hw" <deprecated> use "ham1" instead - "hw-romcode" <deprecated> use "ham1" instead - "ham1" 1-bit Hamming ecc code - "bch4" 4-bit BCH ecc code - "bch8" 8-bit BCH ecc code - "bch16" 16-bit BCH ECC code - Refer below "How to select correct ECC scheme for your device ?" - - - ti,nand-xfer-type: A string setting the data transfer type. One of: - - "prefetch-polled" Prefetch polled mode (default) - "polled" Polled mode, without prefetch - "prefetch-dma" Prefetch enabled DMA mode - "prefetch-irq" Prefetch enabled irq mode - - - elm_id: <deprecated> use "ti,elm-id" instead - - ti,elm-id: Specifies phandle of the ELM devicetree node. - ELM is an on-chip hardware engine on TI SoC which is used for - locating ECC errors for BCHx algorithms. SoC devices which have - ELM hardware engines should specify this device node in .dtsi - Using ELM for ECC error correction frees some CPU cycles. - - rb-gpios: GPIO specifier for the ready/busy# pin. - -For inline partition table parsing (optional): - - - #address-cells: should be set to 1 - - #size-cells: should be set to 1 - -Example for an AM33xx board: - - gpmc: gpmc@50000000 { - compatible = "ti,am3352-gpmc"; - ti,hwmods = "gpmc"; - reg = <0x50000000 0x36c>; - interrupts = <100>; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <2>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x08000000 0x1000000>; /* CS0 space, 16MB */ - elm_id = <&elm>; - interrupt-controller; - #interrupt-cells = <2>; - - nand@0,0 { - compatible = "ti,omap2-nand"; - reg = <0 0 4>; /* CS0, offset 0, NAND I/O window 4 */ - interrupt-parent = <&gpmc>; - interrupts = <0 IRQ_TYPE_NONE>, <1 IRQ_TYPE NONE>; - nand-bus-width = <16>; - ti,nand-ecc-opt = "bch8"; - ti,nand-xfer-type = "polled"; - rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ - - gpmc,sync-clk-ps = <0>; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <44>; - gpmc,cs-wr-off-ns = <44>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <34>; - gpmc,adv-wr-off-ns = <44>; - gpmc,we-off-ns = <40>; - gpmc,oe-off-ns = <54>; - gpmc,access-ns = <64>; - gpmc,rd-cycle-ns = <82>; - gpmc,wr-cycle-ns = <82>; - gpmc,wr-access-ns = <40>; - gpmc,wr-data-mux-bus-ns = <0>; - - #address-cells = <1>; - #size-cells = <1>; - - /* partitions go here */ - }; - }; - -How to select correct ECC scheme for your device ? --------------------------------------------------- -Higher ECC scheme usually means better protection against bit-flips and -increased system lifetime. However, selection of ECC scheme is dependent -on various other factors also like; - -(1) support of built in hardware engines. - Some legacy OMAP SoC do not have ELM harware engine, so those SoC cannot - support ecc-schemes with hardware error-correction (BCHx_HW). However - such SoC can use ecc-schemes with software library for error-correction - (BCHx_HW_DETECTION_SW). The error correction capability with software - library remains equivalent to their hardware counter-part, but there is - slight CPU penalty when too many bit-flips are detected during reads. - -(2) Device parameters like OOBSIZE. - Other factor which governs the selection of ecc-scheme is oob-size. - Higher ECC schemes require more OOB/Spare area to store ECC syndrome, - so the device should have enough free bytes available its OOB/Spare - area to accommodate ECC for entire page. In general following expression - helps in determining if given device can accommodate ECC syndrome: - "2 + (PAGESIZE / 512) * ECC_BYTES" <= OOBSIZE" - where - OOBSIZE number of bytes in OOB/spare area - PAGESIZE number of bytes in main-area of device page - ECC_BYTES number of ECC bytes generated to protect - 512 bytes of data, which is: - '3' for HAM1_xx ecc schemes - '7' for BCH4_xx ecc schemes - '14' for BCH8_xx ecc schemes - '26' for BCH16_xx ecc schemes - - Example(a): For a device with PAGESIZE = 2048 and OOBSIZE = 64 and - trying to use BCH16 (ECC_BYTES=26) ecc-scheme. - Number of ECC bytes per page = (2 + (2048 / 512) * 26) = 106 B - which is greater than capacity of NAND device (OOBSIZE=64) - Hence, BCH16 cannot be supported on given device. But it can - probably use lower ecc-schemes like BCH8. - - Example(b): For a device with PAGESIZE = 2048 and OOBSIZE = 128 and - trying to use BCH16 (ECC_BYTES=26) ecc-scheme. - Number of ECC bytes per page = (2 + (2048 / 512) * 26) = 106 B - which can be accommodated in the OOB/Spare area of this device - (OOBSIZE=128). So this device can use BCH16 ecc-scheme. diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt deleted file mode 100644 index 2133be0d52f2..000000000000 --- a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt +++ /dev/null @@ -1,98 +0,0 @@ -Device tree bindings for NOR flash connect to TI GPMC - -NOR flash connected to the TI GPMC (found on OMAP boards) are represented as -child nodes of the GPMC controller with a name of "nor". - -All timing relevant properties as well as generic GPMC child properties are -explained in a separate documents. Please refer to -Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt - -Required properties: -- bank-width: Width of NOR flash in bytes. GPMC supports 8-bit and - 16-bit devices and so must be either 1 or 2 bytes. -- compatible: Documentation/devicetree/bindings/mtd/mtd-physmap.yaml -- gpmc,cs-on-ns: Chip-select assertion time -- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads -- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes -- gpmc,oe-on-ns: Output-enable assertion time -- gpmc,oe-off-ns: Output-enable de-assertion time -- gpmc,we-on-ns Write-enable assertion time -- gpmc,we-off-ns: Write-enable de-assertion time -- gpmc,access-ns: Start cycle to first data capture (read access) -- gpmc,rd-cycle-ns: Total read cycle time -- gpmc,wr-cycle-ns: Total write cycle time -- linux,mtd-name: Documentation/devicetree/bindings/mtd/mtd-physmap.yaml -- reg: Chip-select, base address (relative to chip-select) - and size of NOR flash. Note that base address will be - typically 0 as this is the start of the chip-select. - -Optional properties: -- gpmc,XXX Additional GPMC timings and settings parameters. See - Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt - -Optional properties for partition table parsing: -- #address-cells: should be set to 1 -- #size-cells: should be set to 1 - -Example: - -gpmc: gpmc@6e000000 { - compatible = "ti,omap3430-gpmc", "simple-bus"; - ti,hwmods = "gpmc"; - reg = <0x6e000000 0x1000>; - interrupts = <20>; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <4>; - #address-cells = <2>; - #size-cells = <1>; - - ranges = <0 0 0x10000000 0x08000000>; - - nor@0,0 { - compatible = "cfi-flash"; - linux,mtd-name= "intel,pf48f6000m0y1be"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0 0 0x08000000>; - bank-width = <2>; - - gpmc,mux-add-data; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <186>; - gpmc,cs-wr-off-ns = <186>; - gpmc,adv-on-ns = <12>; - gpmc,adv-rd-off-ns = <48>; - gpmc,adv-wr-off-ns = <48>; - gpmc,oe-on-ns = <54>; - gpmc,oe-off-ns = <168>; - gpmc,we-on-ns = <54>; - gpmc,we-off-ns = <168>; - gpmc,rd-cycle-ns = <186>; - gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <114>; - gpmc,page-burst-access-ns = <6>; - gpmc,bus-turnaround-ns = <12>; - gpmc,cycle2cycle-delay-ns = <18>; - gpmc,wr-data-mux-bus-ns = <90>; - gpmc,wr-access-ns = <186>; - gpmc,cycle2cycle-samecsen; - gpmc,cycle2cycle-diffcsen; - - partition@0 { - label = "bootloader-nor"; - reg = <0 0x40000>; - }; - partition@40000 { - label = "params-nor"; - reg = <0x40000 0x40000>; - }; - partition@80000 { - label = "kernel-nor"; - reg = <0x80000 0x200000>; - }; - partition@280000 { - label = "filesystem-nor"; - reg = <0x240000 0x7d80000>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt deleted file mode 100644 index e9f01a963a0a..000000000000 --- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt +++ /dev/null @@ -1,48 +0,0 @@ -Device tree bindings for GPMC connected OneNANDs - -GPMC connected OneNAND (found on OMAP boards) are represented as child nodes of -the GPMC controller with a name of "onenand". - -All timing relevant properties as well as generic gpmc child properties are -explained in a separate documents - please refer to -Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt - -Required properties: - - - compatible: "ti,omap2-onenand" - - reg: The CS line the peripheral is connected to - - gpmc,device-width: Width of the ONENAND device connected to the GPMC - in bytes. Must be 1 or 2. - -Optional properties: - - - int-gpios: GPIO specifier for the INT pin. - -For inline partition table parsing (optional): - - - #address-cells: should be set to 1 - - #size-cells: should be set to 1 - -Example for an OMAP3430 board: - - gpmc: gpmc@6e000000 { - compatible = "ti,omap3430-gpmc"; - ti,hwmods = "gpmc"; - reg = <0x6e000000 0x1000000>; - interrupts = <20>; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <4>; - #address-cells = <2>; - #size-cells = <1>; - - onenand@0 { - compatible = "ti,omap2-onenand"; - reg = <0 0 0>; /* CS0, offset 0 */ - gpmc,device-width = <2>; - - #address-cells = <1>; - #size-cells = <1>; - - /* partitions go here */ - }; - }; diff --git a/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml b/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml new file mode 100644 index 000000000000..beb26b9bcfb2 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/ti,gpmc-nand.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments GPMC NAND Flash controller. + +maintainers: + - Tony Lindgren <tony@atomide.com> + - Roger Quadros <rogerq@kernel.org> + +description: + GPMC NAND controller/Flash is represented as a child of the + GPMC controller node. + +properties: + compatible: + const: ti,omap2-nand + + reg: + maxItems: 1 + + interrupts: + items: + - description: Interrupt for fifoevent + - description: Interrupt for termcount + + "#address-cells": true + + "#size-cells": true + + ti,nand-ecc-opt: + description: Desired ECC algorithm + $ref: /schemas/types.yaml#/definitions/string + enum: [sw, ham1, bch4, bch8, bch16] + + ti,nand-xfer-type: + description: Data transfer method between controller and chip. + $ref: /schemas/types.yaml#/definitions/string + enum: [prefetch-polled, polled, prefetch-dma, prefetch-irq] + default: prefetch-polled + + ti,elm-id: + description: + phandle to the ELM (Error Location Module). + $ref: /schemas/types.yaml#/definitions/phandle + + nand-bus-width: + description: + Bus width to the NAND chip + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16] + default: 8 + +patternProperties: + "@[0-9a-f]+$": + $ref: "/schemas/mtd/partitions/partition.yaml" + +allOf: + - $ref: "/schemas/memory-controllers/ti,gpmc-child.yaml" + +required: + - compatible + - reg + - ti,nand-ecc-opt + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + + gpmc: memory-controller@50000000 { + compatible = "ti,am3352-gpmc"; + dmas = <&edma 52 0>; + dma-names = "rxtx"; + clocks = <&l3s_gclk>; + clock-names = "fck"; + reg = <0x50000000 0x2000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + gpmc,num-cs = <7>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */ + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* device IO registers */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + ti,nand-xfer-type = "prefetch-dma"; + ti,nand-ecc-opt = "bch16"; + ti,elm-id = <&elm>; + #address-cells = <1>; + #size-cells = <1>; + + /* NAND generic properties */ + nand-bus-width = <8>; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ + + /* GPMC properties*/ + gpmc,device-width = <1>; + + partition@0 { + label = "NAND.SPL"; + reg = <0x00000000 0x00040000>; + }; + partition@1 { + label = "NAND.SPL.backup1"; + reg = <0x00040000 0x00040000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml b/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml new file mode 100644 index 000000000000..a953f7397c40 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/ti,gpmc-onenand.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OneNAND over Texas Instruments GPMC bus. + +maintainers: + - Tony Lindgren <tony@atomide.com> + - Roger Quadros <rogerq@kernel.org> + +description: + GPMC connected OneNAND (found on OMAP boards) are represented + as child nodes of the GPMC controller. + +properties: + compatible: + const: ti,omap2-onenand + + reg: + items: + - description: | + Chip Select number, register offset and size of + OneNAND register window. + + "#address-cells": true + + "#size-cells": true + + int-gpios: + description: GPIO specifier for the INT pin. + +patternProperties: + "@[0-9a-f]+$": + $ref: "/schemas/mtd/partitions/partition.yaml" + +allOf: + - $ref: "/schemas/memory-controllers/ti,gpmc-child.yaml" + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + gpmc: memory-controller@6e000000 { + compatible = "ti,omap3430-gpmc"; + reg = <0x6e000000 0x02d0>; + interrupts = <20>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + clocks = <&l3s_clkctrl>; + clock-names = "fck"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */ + <1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */ + + onenand@0,0 { + compatible = "ti,omap2-onenand"; + reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x00000000 0x00100000>; + }; + + partition@100000 { + label = "config"; + reg = <0x00100000 0x002c0000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt deleted file mode 100644 index 32821066a85b..000000000000 --- a/Documentation/devicetree/bindings/net/gpmc-eth.txt +++ /dev/null @@ -1,97 +0,0 @@ -Device tree bindings for Ethernet chip connected to TI GPMC - -Besides being used to interface with external memory devices, the -General-Purpose Memory Controller can be used to connect Pseudo-SRAM devices -such as ethernet controllers to processors using the TI GPMC as a data bus. - -Ethernet controllers connected to TI GPMC are represented as child nodes of -the GPMC controller with an "ethernet" name. - -All timing relevant properties as well as generic GPMC child properties are -explained in a separate documents. Please refer to -Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt - -For the properties relevant to the ethernet controller connected to the GPMC -refer to the binding documentation of the device. For example, the documentation -for the SMSC 911x is Documentation/devicetree/bindings/net/smsc,lan9115.yaml - -Child nodes need to specify the GPMC bus address width using the "bank-width" -property but is possible that an ethernet controller also has a property to -specify the I/O registers address width. Even when the GPMC has a maximum 16-bit -address width, it supports devices with 32-bit word registers. -For example with an SMSC LAN911x/912x controller connected to the TI GPMC on an -OMAP2+ board, "bank-width = <2>;" and "reg-io-width = <4>;". - -Required properties: -- bank-width: Address width of the device in bytes. GPMC supports 8-bit - and 16-bit devices and so must be either 1 or 2 bytes. -- compatible: Compatible string property for the ethernet child device. -- gpmc,cs-on-ns: Chip-select assertion time -- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads -- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes -- gpmc,oe-on-ns: Output-enable assertion time -- gpmc,oe-off-ns: Output-enable de-assertion time -- gpmc,we-on-ns: Write-enable assertion time -- gpmc,we-off-ns: Write-enable de-assertion time -- gpmc,access-ns: Start cycle to first data capture (read access) -- gpmc,rd-cycle-ns: Total read cycle time -- gpmc,wr-cycle-ns: Total write cycle time -- reg: Chip-select, base address (relative to chip-select) - and size of the memory mapped for the device. - Note that base address will be typically 0 as this - is the start of the chip-select. - -Optional properties: -- gpmc,XXX Additional GPMC timings and settings parameters. See - Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt - -Example: - -gpmc: gpmc@6e000000 { - compatible = "ti,omap3430-gpmc"; - ti,hwmods = "gpmc"; - reg = <0x6e000000 0x1000>; - interrupts = <20>; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <4>; - #address-cells = <2>; - #size-cells = <1>; - - ranges = <5 0 0x2c000000 0x1000000>; - - ethernet@5,0 { - compatible = "smsc,lan9221", "smsc,lan9115"; - reg = <5 0 0xff>; - bank-width = <2>; - - gpmc,mux-add-data; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <186>; - gpmc,cs-wr-off-ns = <186>; - gpmc,adv-on-ns = <12>; - gpmc,adv-rd-off-ns = <48>; - gpmc,adv-wr-off-ns = <48>; - gpmc,oe-on-ns = <54>; - gpmc,oe-off-ns = <168>; - gpmc,we-on-ns = <54>; - gpmc,we-off-ns = <168>; - gpmc,rd-cycle-ns = <186>; - gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <114>; - gpmc,page-burst-access-ns = <6>; - gpmc,bus-turnaround-ns = <12>; - gpmc,cycle2cycle-delay-ns = <18>; - gpmc,wr-data-mux-bus-ns = <90>; - gpmc,wr-access-ns = <186>; - gpmc,cycle2cycle-samecsen; - gpmc,cycle2cycle-diffcsen; - - interrupt-parent = <&gpio6>; - interrupts = <16>; - vmmc-supply = <&vddvario>; - vmmc_aux-supply = <&vdd33a>; - reg-io-width = <4>; - - smsc,save-mac-address; - }; -}; diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt index 6a99d2aa8075..8e4f9bfb316d 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt @@ -197,7 +197,7 @@ Tegra194 RC mode: Tegra194 EP mode: ----------------- - pcie_ep@141a0000 { + pcie-ep@141a0000 { compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */ diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt deleted file mode 100644 index f1bbe0826be5..000000000000 --- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt +++ /dev/null @@ -1,22 +0,0 @@ -* Freescale LINFlexD UART - -The LINFlexD controller implements several LIN protocol versions, as well as -support for full-duplex UART communication through 8-bit and 9-bit frames. - -See chapter 47 ("LINFlexD") in the reference manual[1]. - -Required properties: -- compatible : - - "fsl,s32v234-linflexuart" for LINFlexD configured in UART mode, which - is compatible with the one integrated on S32V234 SoC -- reg : Address and length of the register set for the device -- interrupts : Should contain uart interrupt - -Example: -uart0: serial@40053000 { - compatible = "fsl,s32v234-linflexuart"; - reg = <0x0 0x40053000 0x0 0x1000>; - interrupts = <0 59 4>; -}; - -[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml new file mode 100644 index 000000000000..8b643bae3c7b --- /dev/null +++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/fsl,s32-linflexuart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale LINFlexD UART + +description: | + The LINFlexD controller implements several LIN protocol versions, as well + as support for full-duplex UART communication through 8-bit and 9-bit + frames. See chapter 47 ("LINFlexD") in the reference manual + https://www.nxp.com/webapp/Download?colCode=S32V234RM. + +maintainers: + - Chester Lin <clin@suse.com> + +allOf: + - $ref: "serial.yaml" + +properties: + compatible: + oneOf: + - const: fsl,s32v234-linflexuart + - items: + - const: nxp,s32g2-linflexuart + - const: fsl,s32v234-linflexuart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + serial@40053000 { + compatible = "fsl,s32v234-linflexuart"; + reg = <0x40053000 0x1000>; + interrupts = <0 59 4>; + }; diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml new file mode 100644 index 000000000000..ecd86cfb3da4 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MM DISP blk-ctrl + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MM DISP blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the display and MIPI CSI + peripherals located in the DISP domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mm-disp-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 5 + maxItems: 5 + + power-domain-names: + items: + - const: bus + - const: csi-bridge + - const: lcdif + - const: mipi-dsi + - const: mipi-csi + + clocks: + minItems: 10 + maxItems: 10 + + clock-names: + items: + - const: csi-bridge-axi + - const: csi-bridge-apb + - const: csi-bridge-core + - const: lcdif-axi + - const: lcdif-apb + - const: lcdif-pix + - const: dsi-pclk + - const: dsi-ref + - const: csi-aclk + - const: csi-pclk + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mm-clock.h> + #include <dt-bindings/power/imx8mm-power.h> + + disp_blk_ctl: blk_ctrl@32e28000 { + compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon"; + reg = <0x32e28000 0x100>; + power-domains = <&pgc_dispmix>, <&pgc_dispmix>, <&pgc_dispmix>, + <&pgc_mipi>, <&pgc_mipi>; + power-domain-names = "bus", "csi-bridge", "lcdif", + "mipi-dsi", "mipi-csi"; + clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>, + <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_CSI1_ROOT>, + <&clk IMX8MM_CLK_DISP_AXI_ROOT>, + <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_DISP_ROOT>, + <&clk IMX8MM_CLK_DSI_CORE>, + <&clk IMX8MM_CLK_DSI_PHY_REF>, + <&clk IMX8MM_CLK_CSI1_CORE>, + <&clk IMX8MM_CLK_CSI1_PHY_REF>; + clock-names = "csi-bridge-axi", "csi-bridge-apb", "csi-bridge-core", + "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk", + "dsi-ref", "csi-aclk", "csi-pclk"; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml new file mode 100644 index 000000000000..26487daa64d9 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MM VPU blk-ctrl + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MM VPU blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the VPU peripherals + located in the VPU domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mm-vpu-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 4 + maxItems: 4 + + power-domain-names: + items: + - const: bus + - const: g1 + - const: g2 + - const: h1 + + clocks: + minItems: 3 + maxItems: 3 + + clock-names: + items: + - const: g1 + - const: g2 + - const: h1 + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mm-clock.h> + #include <dt-bindings/power/imx8mm-power.h> + + vpu_blk_ctrl: blk-ctrl@38330000 { + compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon"; + reg = <0x38330000 0x100>; + power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>, + <&pgc_vpu_g2>, <&pgc_vpu_h1>; + power-domain-names = "bus", "g1", "g2", "h1"; + clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>, + <&clk IMX8MM_CLK_VPU_G2_ROOT>, + <&clk IMX8MM_CLK_VPU_H1_ROOT>; + clock-names = "g1", "g2", "h1"; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml index 39b66e9ce3e3..7d48ea094c66 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml @@ -21,6 +21,9 @@ properties: - const: allwinner,sun8i-a83t-i2s - const: allwinner,sun8i-h3-i2s - items: + - const: allwinner,sun8i-r40-i2s + - const: allwinner,sun8i-h3-i2s + - items: - const: allwinner,sun8i-v3-i2s - const: allwinner,sun8i-h3-i2s - const: allwinner,sun50i-a64-codec-i2s diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index a826ac73feec..518487ec65e5 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -193,6 +193,8 @@ patternProperties: description: B&R Industrial Automation GmbH "^bticino,.*": description: Bticino International + "^calamp,.*": + description: CalAmp Corp. "^calaosystems,.*": description: CALAO Systems SAS "^calxeda,.*": @@ -337,6 +339,8 @@ patternProperties: description: EBV Elektronik "^eckelmann,.*": description: Eckelmann AG + "^edimax,.*": + description: EDIMAX Technology Co., Ltd "^edt,.*": description: Emerging Display Technologies "^eeti,.*": @@ -397,6 +401,8 @@ patternProperties: description: Exar Corporation "^excito,.*": description: Excito + "^exegin,.*": + description: Exegin Technologies Limited "^ezchip,.*": description: EZchip Semiconductor "^facebook,.*": @@ -581,6 +587,8 @@ patternProperties: description: JEDEC Solid State Technology Association "^jesurun,.*": description: Shenzhen Jesurun Electronics Business Dept. + "^jethome,.*": + description: JetHome (IP Sokolov P.A.) "^jianda,.*": description: Jiandangjing Technology Co., Ltd. "^kam,.*": @@ -1108,6 +1116,8 @@ patternProperties: description: SpinalHDL "^sprd,.*": description: Spreadtrum Communications Inc. + "^ssi,.*": + description: SSI Computer Corp "^sst,.*": description: Silicon Storage Technology, Inc. "^sstar,.*": |