Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This is a fairly quiet release. We don't have any patches to the core
  framework. The only patch that can even be considered "core" adds
  another clk_get() variant. The rest of the changes are in drivers for
  various SoCs, and we have a few bits for ARM shmobile architecture
  code (dts and mach) due to the dependency we're breaking between
  shmobile architecture code and its clk driver. Those shmobile bits
  have also been pulled into arm-soc tree. Here's the summary:

  Core:

   - Support for devm_get_clk_from_child() used with DT bindings that
     have subnodes with the 'clocks' property

  New Drivers:

   - Allwinner A64 (sun50i)
   - i.MX imx6ull
   - Socionext's UniPhier SoC CPUs
   - Mediatek MT2701 SoCs
   - Rockchip rk1108 SoCs
   - Qualcomm MSM8994/MSM8992 SoCS
   - Qualcomm RPM Clocks
   - Hisilicon Hi3516CV300 and Hi3798CV200 CRG
   - Oxford Semiconductor OX820 and OX810SE SoCs
   - Renesas RZ/G1M and RZ/GIE SoCs
   - Renesas R-Car RST driver for mode pin states

  Updates:

   - Four Allwinner SoCs are migrated to the new style clk driver
   - Rockchip rk3399,rk3066 PLL optimizations
   - i.MX LVDS display glitch fixes and AV PLL precision improvements
   - Qualcomm MSM8996 GPU GDSCs, hw controlled GDSCs, and Alpha PLL
     support
   - Explicit demodularization of always builtin drivers
   - Freescale Qoriq ls1012a and ls1046a support
   - Exynos 5433 parent typo fix and critical clock tagging
   - Renesas r8a7743/r8a7745 CPG
   - Renesas R-Car M3-W CSI2/VIN/SYS-DMAC/(H)SCIF/I2C/DRIF/gfx support
   - stm32f4* LSI, LSE, RTC, and QSPI clocks
   - pxa27x and pxa25x cpufreq as clks
   - TI omap36xx sprz319 advisory 2.1 workaround
   - Broadcom bcm2835 rate change propogation to PLLH_AUX from VEC"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
  clk: bcm: Fix 'maybe-uninitialized' warning in bcm2835_clock_choose_div_and_prate()
  clk: add devm_get_clk_from_child() API
  clk: st: clk-flexgen: Unmap region obtained by of_iomap
  clk: keystone: pll: Unmap region obtained by of_iomap
  clk:mmp:clk-of-mmp2: Free memory and Unmap region obtained by kzalloc and of_iomap
  clk:mmp:clk-of-pxa910: Free memory and Unmap region obtained by kzmalloc and of_iomap
  clk: mmp: clk-of-pxa1928: Free memory obtained by kzalloc
  clk: cdce925: Fix limit check
  clk: bcm: Make COMMON_CLK_IPROC into a library
  clk: qoriq: added ls1012a clock configuration
  clk: ti: dra7: fix "failed to lookup clock node gmac_gmii_ref_clk_div" boot message
  clk: bcm: Allow rate change propagation to PLLH_AUX on VEC clock
  clk: bcm: Support rate change propagation on bcm2835 clocks
  clk: bcm2835: Avoid overwriting the div info when disabling a pll_div clk
  clk: ti: omap36xx: Work around sprz319 advisory 2.1
  clk: clk-wm831x: fix a logic error
  clk: uniphier: add cpufreq data for LD11, LD20 SoCs
  clk: uniphier: add CPU-gear change (cpufreq) support
  clk: qcom: Put venus core0/1 gdscs to hw control mode
  clk: qcom: gdsc: Add support for gdscs with HW control
  ...

10 files changed, 166 insertions, 22 deletions

diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
index 63379b04e052..1dc80f8811fe 100644
--- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
@@ -79,7 +79,7 @@ Required Properties:
 	Input clocks for fsys clock controller:
 		- oscclk
 		- sclk_ufs_mphy
-		- div_aclk_fsys_200
+		- aclk_fsys_200
 		- sclk_pcie_100_fsys
 		- sclk_ufsunipro_fsys
 		- sclk_mmc2_fsys
@@ -104,6 +104,10 @@ Required Properties:
 		- sclk_decon_tv_vclk_disp
 		- aclk_disp_333
 
+	Input clocks for audio clock controller:
+		- oscclk
+		- fout_aud_pll
+
 	Input clocks for bus0 clock controller:
 		- aclk_bus0_400
 
@@ -235,7 +239,7 @@ Example 2: Examples of clock controller nodes are listed below.
 
 		clock-names = "oscclk",
 			"sclk_ufs_mphy",
-			"div_aclk_fsys_200",
+			"aclk_fsys_200",
 			"sclk_pcie_100_fsys",
 			"sclk_ufsunipro_fsys",
 			"sclk_mmc2_fsys",
@@ -245,7 +249,7 @@ Example 2: Examples of clock controller nodes are listed below.
 			"sclk_usbdrd30_fsys";
 		clocks = <&xxti>,
 		       <&cmu_cpif CLK_SCLK_UFS_MPHY>,
-		       <&cmu_top CLK_DIV_ACLK_FSYS_200>,
+		       <&cmu_top CLK_ACLK_FSYS_200>,
 		       <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
 		       <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>,
 		       <&cmu_top CLK_SCLK_MMC2_FSYS>,
@@ -297,6 +301,9 @@ Example 2: Examples of clock controller nodes are listed below.
 		compatible = "samsung,exynos5433-cmu-aud";
 		reg = <0x114c0000 0x0b04>;
 		#clock-cells = <1>;
+
+		clock-names = "oscclk", "fout_aud_pll";
+		clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>;
 	};
 
 	cmu_bus0: clock-controller@13600000 {
diff --git a/Documentation/devicetree/bindings/clock/hi3519-crg.txt b/Documentation/devicetree/bindings/clock/hisi-crg.txt
index acd1f235d548..cc60b3d423f3 100644
--- a/Documentation/devicetree/bindings/clock/hi3519-crg.txt
+++ b/Documentation/devicetree/bindings/clock/hisi-crg.txt
@@ -1,7 +1,7 @@
-* Hisilicon Hi3519 Clock and Reset Generator(CRG)
+* HiSilicon Clock and Reset Generator(CRG)
 
-The Hi3519 CRG module provides clock and reset signals to various
-controllers within the SoC.
+The CRG module provides clock and reset signals to various
+modules within the SoC.
 
 This binding uses the following bindings:
     Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -10,7 +10,11 @@ This binding uses the following bindings:
 Required Properties:
 
 - compatible: should be one of the following.
-  - "hisilicon,hi3519-crg" - controller compatible with Hi3519 SoC.
+  - "hisilicon,hi3516cv300-crg"
+  - "hisilicon,hi3516cv300-sysctrl"
+  - "hisilicon,hi3519-crg"
+  - "hisilicon,hi3798cv200-crg"
+  - "hisilicon,hi3798cv200-sysctrl"
 
 - reg: physical base address of the controller and length of memory mapped
   region.
diff --git a/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt b/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt
index 208cca6ac4ec..b652f3fb7796 100644
--- a/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt
+++ b/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt
@@ -5,22 +5,15 @@ Please also refer to clock-bindings.txt in this directory for common clock
 bindings usage.
 
 Required properties:
-- compatible: Should be "oxsemi,ox810se-stdclk"
+- compatible: For OX810SE, should be "oxsemi,ox810se-stdclk"
+	      For OX820, should be "oxsemi,ox820-stdclk"
 - #clock-cells: 1, see below
 
 Parent node should have the following properties :
-- compatible: Should be "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"
-
-For OX810SE, the clock indices are :
- - 0: LEON
- - 1: DMA_SGDMA
- - 2: CIPHER
- - 3: SATA
- - 4: AUDIO
- - 5: USBMPH
- - 6: ETHA
- - 7: PCIA
- - 8: NAND
+- compatible: For OX810SE, should be
+		"oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"
+	      For OX820, should be
+		"oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd"
 
 example:
 
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
index 3cf44217068e..5b4dfc1ea54f 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
@@ -14,6 +14,7 @@ Required properties :
 			"qcom,gcc-msm8974"
 			"qcom,gcc-msm8974pro"
 			"qcom,gcc-msm8974pro-ac"
+			"qcom,gcc-msm8994"
 			"qcom,gcc-msm8996"
 			"qcom,gcc-mdm9615"
 
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
new file mode 100644
index 000000000000..87d3714b956a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
@@ -0,0 +1,37 @@
+Qualcomm RPM Clock Controller Binding
+------------------------------------------------
+The RPM is a dedicated hardware engine for managing the shared
+SoC resources in order to keep the lowest power profile. It
+communicates with other hardware subsystems via shared memory
+and accepts clock requests, aggregates the requests and turns
+the clocks on/off or scales them on demand.
+
+Required properties :
+- compatible : shall contain only one of the following. The generic
+               compatible "qcom,rpmcc" should be also included.
+
+			"qcom,rpmcc-msm8916", "qcom,rpmcc"
+			"qcom,rpmcc-apq8064", "qcom,rpmcc"
+
+- #clock-cells : shall contain 1
+
+Example:
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <0 168 1>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests {
+				compatible = "qcom,rpm-msm8916";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
+					#clock-cells = <1>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
index 394d725ac7e0..c46919412953 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
@@ -13,6 +13,8 @@ They provide the following functionalities:
 
 Required Properties:
   - compatible: Must be one of:
+      - "renesas,r8a7743-cpg-mssr" for the r8a7743 SoC (RZ/G1M)
+      - "renesas,r8a7745-cpg-mssr" for the r8a7745 SoC (RZ/G1E)
       - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3)
       - "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W)
 
@@ -22,8 +24,9 @@ Required Properties:
   - clocks: References to external parent clocks, one entry for each entry in
     clock-names
   - clock-names: List of external parent clock names. Valid names are:
-      - "extal" (r8a7795, r8a7796)
+      - "extal" (r8a7743, r8a7745, r8a7795, r8a7796)
       - "extalr" (r8a7795, r8a7796)
+      - "usb_extal" (r8a7743, r8a7745)
 
   - #clock-cells: Must be 2
       - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
new file mode 100644
index 000000000000..4da126116cf0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
@@ -0,0 +1,59 @@
+* Rockchip RK1108 Clock and Reset Unit
+
+The RK1108 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk1108-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+  If missing pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk1108-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "ext_vip" - external VIP clock - optional
+ - "ext_i2s" - external I2S clock - optional
+ - "ext_gmac" - external GMAC clock - optional
+ - "hdmiphy" - external clock input derived from HDMI PHY - optional
+ - "usbphy" - external clock input derived from USB PHY - optional
+
+Example: Clock controller node:
+
+	cru: cru@20200000 {
+		compatible = "rockchip,rk1108-cru";
+		reg = <0x20200000 0x1000>;
+		rockchip,grf = <&grf>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial@10230000 {
+		compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
+		reg = <0x10230000 0x100>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART0>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
index c209de6cfadb..0532d815dae3 100644
--- a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
+++ b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
@@ -7,7 +7,9 @@ Please refer to clock-bindings.txt for common clock controller binding usage.
 Please also refer to reset.txt for common reset controller binding usage.
 
 Required properties:
-- compatible: Should be "st,stm32f42xx-rcc"
+- compatible: Should be:
+  "st,stm32f42xx-rcc"
+  "st,stm32f469-rcc"
 - reg: should be register base and length as documented in the
   datasheet
 - #reset-cells: 1, see below
diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index 3868458a5feb..74d44a4273f2 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -7,6 +7,7 @@ Required properties :
 		- "allwinner,sun8i-a23-ccu"
 		- "allwinner,sun8i-a33-ccu"
 		- "allwinner,sun8i-h3-ccu"
+		- "allwinner,sun50i-a64-ccu"
 
 - reg: Must contain the registers base address and length
 - clocks: phandle to the oscillators feeding the CCU. Two are needed:
diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt
new file mode 100644
index 000000000000..fe5e0f37b3c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/renesas,rst.txt
@@ -0,0 +1,37 @@
+DT bindings for the Renesas R-Car and RZ/G Reset Controllers
+
+The R-Car and RZ/G Reset Controllers provide reset control, and implement the
+following functions:
+  - Latching of the levels on mode pins when PRESET# is negated,
+  - Mode monitoring register,
+  - Reset control of peripheral devices (on R-Car Gen1),
+  - Watchdog timer (on R-Car Gen1),
+  - Register-based reset control and boot address registers for the various CPU
+    cores (on R-Car Gen2 and Gen3, and on RZ/G).
+
+
+Required properties:
+  - compatible: Should be
+		  - "renesas,<soctype>-reset-wdt" for R-Car Gen1,
+		  - "renesas,<soctype>-rst" for R-Car Gen2 and Gen3, and RZ/G
+		Examples with soctypes are:
+		  - "renesas,r8a7743-rst" (RZ/G1M)
+		  - "renesas,r8a7745-rst" (RZ/G1E)
+		  - "renesas,r8a7778-reset-wdt" (R-Car M1A)
+		  - "renesas,r8a7779-reset-wdt" (R-Car H1)
+		  - "renesas,r8a7790-rst" (R-Car H2)
+		  - "renesas,r8a7791-rst" (R-Car M2-W)
+		  - "renesas,r8a7792-rst" (R-Car V2H
+		  - "renesas,r8a7793-rst" (R-Car M2-N)
+		  - "renesas,r8a7794-rst" (R-Car E2)
+		  - "renesas,r8a7795-rst" (R-Car H3)
+		  - "renesas,r8a7796-rst" (R-Car M3-W)
+  - reg: Address start and address range for the device.
+
+
+Example:
+
+	rst: reset-controller@e6160000 {
+		compatible = "renesas,r8a7795-rst";
+		reg = <0 0xe6160000 0 0x0200>;
+	};