Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Several conflicts here.

NFP driver bug fix adding nfp_netdev_is_nfp_repr() check to
nfp_fl_output() needed some adjustments because the code block is in
an else block now.

Parallel additions to net/pkt_cls.h and net/sch_generic.h

A bug fix in __tcp_retransmit_skb() conflicted with some of
the rbtree changes in net-next.

The tc action RCU callback fixes in 'net' had some overlap with some
of the recent tcf_block reworking.

Signed-off-by: David S. Miller <davem@davemloft.net>

5 files changed, 37 insertions, 17 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
index 33e96f740639..147d4e8a1403 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
+++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
@@ -14,3 +14,11 @@ Description:
 		Show or set the gain boost of the amp, from 0-31 range.
 		18 = indoors (default)
 		14 = outdoors
+
+What		/sys/bus/iio/devices/iio:deviceX/noise_level_tripped
+Date:		May 2017
+KernelVersion:	4.13
+Contact:	Matt Ranostay <matt.ranostay@konsulko.com>
+Description:
+		When 1 the noise level is over the trip level and not reporting
+		valid data
diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power
index 676fdf5f2a99..5cbb6f038615 100644
--- a/Documentation/ABI/testing/sysfs-devices-power
+++ b/Documentation/ABI/testing/sysfs-devices-power
@@ -211,7 +211,9 @@ Description:
 		device, after it has been suspended at run time, from a resume
 		request to the moment the device will be ready to process I/O,
 		in microseconds.  If it is equal to 0, however, this means that
-		the PM QoS resume latency may be arbitrary.
+		the PM QoS resume latency may be arbitrary and the special value
+		"n/a" means that user space cannot accept any resume latency at
+		all for the given device.
 
 		Not all drivers support this attribute.  If it isn't supported,
 		it is not present.
diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
index 38d74314b7ab..b6c1afa6f02d 100644
--- a/Documentation/devicetree/bindings/iio/proximity/as3935.txt
+++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
@@ -16,6 +16,10 @@ Optional properties:
 	- ams,tuning-capacitor-pf: Calibration tuning capacitor stepping
 	  value 0 - 120pF. This will require using the calibration data from
 	  the manufacturer.
+	- ams,nflwdth: Set the noise and watchdog threshold register on
+	  startup. This will need to set according to the noise from the
+	  MCU board, and possibly the local environment. Refer to the
+	  datasheet for the threshold settings.
 
 Example:
 
@@ -27,4 +31,5 @@ as3935@0 {
 	interrupt-parent = <&gpio1>;
 	interrupts = <16 1>;
 	ams,tuning-capacitor-pf = <80>;
+	ams,nflwdth = <0x44>;
 };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
index 4c29cdab0ea5..5eb108e180fa 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
@@ -99,7 +99,7 @@ Examples:
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			#msi-cells = <1>;
-			reg = <0x0 0x2c200000 0 0x200000>;
+			reg = <0x0 0x2c200000 0 0x20000>;
 		};
 	};
 
@@ -124,14 +124,14 @@ Examples:
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			#msi-cells = <1>;
-			reg = <0x0 0x2c200000 0 0x200000>;
+			reg = <0x0 0x2c200000 0 0x20000>;
 		};
 
 		gic-its@2c400000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			#msi-cells = <1>;
-			reg = <0x0 0x2c400000 0 0x200000>;
+			reg = <0x0 0x2c400000 0 0x20000>;
 		};
 
 		ppi-partitions {
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 329e740adea7..f6f80380dff2 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -1108,14 +1108,6 @@ When kbuild executes, the following steps are followed (roughly):
     ld
 	Link target. Often, LDFLAGS_$@ is used to set specific options to ld.
 
-    objcopy
-	Copy binary. Uses OBJCOPYFLAGS usually specified in
-	arch/$(ARCH)/Makefile.
-	OBJCOPYFLAGS_$@ may be used to set additional options.
-
-    gzip
-	Compress target. Use maximum compression to compress target.
-
 	Example:
 		#arch/x86/boot/Makefile
 		LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary
@@ -1139,6 +1131,19 @@ When kbuild executes, the following steps are followed (roughly):
 	      resulting in the target file being recompiled for no
 	      obvious reason.
 
+    objcopy
+	Copy binary. Uses OBJCOPYFLAGS usually specified in
+	arch/$(ARCH)/Makefile.
+	OBJCOPYFLAGS_$@ may be used to set additional options.
+
+    gzip
+	Compress target. Use maximum compression to compress target.
+
+	Example:
+		#arch/x86/boot/compressed/Makefile
+		$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
+			$(call if_changed,gzip)
+
     dtc
 	Create flattened device tree blob object suitable for linking
 	into vmlinux. Device tree blobs linked into vmlinux are placed
@@ -1219,7 +1224,7 @@ When kbuild executes, the following steps are followed (roughly):
 	that may be shared between individual architectures.
 	The recommended approach how to use a generic header file is
 	to list the file in the Kbuild file.
-	See "7.3 generic-y" for further info on syntax etc.
+	See "7.2 generic-y" for further info on syntax etc.
 
 --- 6.11 Post-link pass
 
@@ -1254,13 +1259,13 @@ A Kbuild file may be defined under arch/<arch>/include/uapi/asm/ and
 arch/<arch>/include/asm/ to list asm files coming from asm-generic.
 See subsequent chapter for the syntax of the Kbuild file.
 
-	--- 7.1 no-export-headers
+--- 7.1 no-export-headers
 
 	no-export-headers is essentially used by include/uapi/linux/Kbuild to
 	avoid exporting specific headers (e.g. kvm.h) on architectures that do
 	not support it. It should be avoided as much as possible.
 
-	--- 7.2 generic-y
+--- 7.2 generic-y
 
 	If an architecture uses a verbatim copy of a header from
 	include/asm-generic then this is listed in the file
@@ -1287,7 +1292,7 @@ See subsequent chapter for the syntax of the Kbuild file.
 		Example: termios.h
 			#include <asm-generic/termios.h>
 
-	--- 7.3 generated-y
+--- 7.3 generated-y
 
 	If an architecture generates other header files alongside generic-y
 	wrappers, generated-y specifies them.
@@ -1299,7 +1304,7 @@ See subsequent chapter for the syntax of the Kbuild file.
 			#arch/x86/include/asm/Kbuild
 			generated-y += syscalls_32.h
 
-	--- 7.5 mandatory-y
+--- 7.4 mandatory-y
 
 	mandatory-y is essentially used by include/uapi/asm-generic/Kbuild.asm
 	to define the minimum set of headers that must be exported in