Merge tag 'stm32-dt-for-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT for v5.19, round 1

Highlights:
----------

-MCU:
 -Fix pinctrl node names to match with pinctrl yaml.

- MPU:
 -General:
  - Fix pinctrl node names to match with pinctrl yaml.
  - Add Protonics boards support based on STM32MP151A SoC:
    - PRTT1C - 10BaseT1L switch: mainly embeds a sja1105q switch with
               TI and Micrel 10BaseT Phys and wifi support.
    - PRTT1S - 10BaseT1L CO2 sensor board: mainly embeds I2C humidity
               and CO2 sensors.
    - PRTT1A - 10BaseT1L multi functional controller.

 - ST boards:
  - Add RTC support on stm32mp13.
  - Add button and heartbit support on stm32mp13 DK board.
  - Add a secure version of STM32MP15 ED1/EV1/DK1/DK2 boards based
    on OP-TEE OS and SCMI protocol.

 - DH boards:
  - Use MCO2 to generate PHY clock and ETHRX clock in order to release
    internal PLL for a better SD card usage.
  - Add 1ms PHY post-reset on Avenger96 board to match with PHY
    requirements.

* tag 'stm32-dt-for-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits)
  ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
  dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
  ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15
  dt-bindings: reset: stm32mp15: rename RST_SCMI define
  dt-bindings: clock: stm32mp15: rename CK_SCMI define
  dt-bindings: clock: stm32mp1: describes clocks if "st,stm32mp1-rcc-secure"
  dt-bindings: rcc: Add optional external ethernet RX clock properties
  ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk
  ARM: dts: stm32: add blue led (Linux heartbeat) on stm32mp135f-dk
  ARM: dts: stm32: add EXTI interrupt-parent to pinctrl node on stm32mp131
  ARM: dts: stm32: add support for Protonic PRTT1x boards
  ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group
  dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 antenna variant
  dt-bindings: arm: stm32: Add compatible strings for Protonic T1L boards
  dt-bindings: arm: stm32: correct blank lines
  dt-bindings: arm: stm32: narrow DH STM32MP1 SoM boards
  ARM: dts: stm32: enable RTC support on stm32mp135f-dk
  ARM: dts: stm32: add RTC node on stm32mp131
  ARM: dts: stm32: Fix PHY post-reset delay on Avenger96
  ARM: dts: stm32: fix pinctrl node name warnings (MPU soc)
  ...

Link: https://lore.kernel.org/r/5818c943-882d-7e50-430d-ae3299a108ee@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 7 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index fdec7b7bf26d..01c917ab6ca9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1156,10 +1156,14 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32h743i-disco.dtb \
 	stm32h750i-art-pi.dtb \
 	stm32mp135f-dk.dtb \
+	stm32mp151a-prtt1a.dtb \
+	stm32mp151a-prtt1c.dtb \
+	stm32mp151a-prtt1s.dtb \
 	stm32mp153c-dhcom-drc02.dtb \
 	stm32mp157a-avenger96.dtb \
 	stm32mp157a-dhcor-avenger96.dtb \
 	stm32mp157a-dk1.dtb \
+	stm32mp157a-dk1-scmi.dtb \
 	stm32mp157a-iot-box.dtb \
 	stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
 	stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \
@@ -1170,9 +1174,12 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32mp157c-dhcom-pdk2.dtb \
 	stm32mp157c-dhcom-picoitx.dtb \
 	stm32mp157c-dk2.dtb \
+	stm32mp157c-dk2-scmi.dtb \
 	stm32mp157c-ed1.dtb \
+	stm32mp157c-ed1-scmi.dtb \
 	stm32mp157c-emsbc-argon.dtb \
 	stm32mp157c-ev1.dtb \
+	stm32mp157c-ev1-scmi.dtb \
 	stm32mp157c-lxa-mc1.dtb \
 	stm32mp157c-odyssey.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \