diff options
| author |   David S. Miller <davem@davemloft.net> | 2014-03-05 20:32:02 -0500 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2014-03-05 20:32:02 -0500 |
| commit | 67ddc87f162e2d0e29db2b6b21c5a3fbcb8be206 (patch) | |
| tree | c83ac73e3d569156d4b7f3dab3e7e27e0054cd0d /arch/arm/boot/dts/am335x-evmsk.dts | |
| parent | ieee802154: fix whitespace issues in Kconfig (diff) | |
| parent | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net (diff) | |
| download | linux-dev-67ddc87f162e2d0e29db2b6b21c5a3fbcb8be206.tar.xz linux-dev-67ddc87f162e2d0e29db2b6b21c5a3fbcb8be206.zip | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
drivers/net/wireless/ath/ath9k/recv.c
drivers/net/wireless/mwifiex/pcie.c
net/ipv6/sit.c
The SIT driver conflict consists of a bug fix being done by hand
in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper
was created (netdev_alloc_pcpu_stats()) which takes care of this.
The two wireless conflicts were overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'arch/arm/boot/dts/am335x-evmsk.dts')
| -rw-r--r-- | arch/arm/boot/dts/am335x-evmsk.dts | 11 |
1 files changed, 10 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 4718ec4a4dbf..486880b74831 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -121,7 +121,7 @@ ti,model = "AM335x-EVMSK"; ti,audio-codec = <&tlv320aic3106>; ti,mcasp-controller = <&mcasp1>; - ti,codec-clock-rate = <24576000>; + ti,codec-clock-rate = <24000000>; ti,audio-routing = "Headphone Jack", "HPLOUT", "Headphone Jack", "HPROUT"; @@ -256,6 +256,12 @@ >; }; + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + mcasp1_pins: mcasp1_pins { pinctrl-single,pins = < 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ @@ -456,6 +462,9 @@ status = "okay"; vmmc-supply = <&vmmc_reg>; bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; &sham { |