Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM device-tree updates from Arnd Bergmann:
 "Device-tree continues to see lots of updates. The majority of patches
  here are smaller changes for new hardware on existing platforms, and
  there are a few larger changes worth pointing out.

  New machines:

   - The new Action Semi S500 platform is added along with initial
     support for the LeMaker Guitar board.

   - STM32 gains support for three new boards: stm32h743-disco,
     stm32f746-disco, and stm32f769-disco, along with new device support
     for the existing stm32f429 boards.

   - Renesas adds two new boards, the tiny GR-Peach based on RZ/A1H with
     10MB on-chip SRAM, and the iWave G20D-Q7 System-on-Module plus
     board.

   - On Marvell "mvebu", we gain support for the Linksys WRT3200ACM
     wireless router.

   - For NXP i.MX, we gain support for the Gateworks Ventana GW5600 and
     the Technexion Pico i.MX7D single-board computers.

   - The BeagleBone Blue is added for OMAP, it's the latest variation of
     the popular Beaglebone Black single-board computer.

   - The Allwinner based Lichee Pi Zero and NanoPi M1 Plus boards are
     added, these are the latest variations of a seemingly endless
     supply of similar single-board computers.

  Other updates:

   - Linus Walleij improves support for the "Faraday" based SoC
     platforms from various SoC makers (Moxart, Aspeed, Gemini)

   - The ARM Mali GPU is now describe on Rockchips SoCs

   - Mediatek MT7623 is extended significantly, making it much more
     useful.

   - Lots of individual updates on Renesas, OMAP, Rockchips, Broadcom,
     Allwinner, Qualcomm, iMX

   - For Amlogic, the clock support is extended a lot on meson8b.

   - We now build the devicetree file for the Raspberry Pi 3 on 32-bit
     ARM, in addition to the existing ARM64 support, to help users
     wanting to run a 32-bit system on it"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (345 commits)
  ARM: dts: socfpga: set the i2c frequency
  ARM: dts: socfpga: Add second ethernet alias to VINING FPGA
  ARM: dts: socfpga: Drop LED node from VINING FPGA
  ARM: dts: socfpga: Remove I2C EEPROMs from VINING FPGA
  ARM: dts: socfpga: Enable QSPI support on VINING FPGA
  ARM: dts: socfpga: Fix the ethernet clock phandle
  ARM: pxa: Use - instead of @ for DT OPP entries
  ARM: dts: owl-s500: Add SPS node
  ARM: dts: owl-s500: Set CPU enable-method
  dt-bindings: arm: cpus: Add S500 enable-method
  ARM: dts: Add Actions Semi S500 and LeMaker Guitar
  dt-bindings: arm: Document Actions Semi S900
  dt-bindings: timer: Document Owl timer
  ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes
  dt-bindings: arm: Document Actions Semi S500
  dt-bindings: Add vendor prefix for Actions Semi
  ARM: dts: turris-omnia: Add generic compatible string for I2C EEPROM
  ARM: dts: mvebu: add support for Linksys WRT3200ACM (Rango)
  ARM: dts: armada-385-linksys: fixup button node names
  ARM: dts: armada-385-linksys: group pins in pinctrl
  ...

1 files changed, 28 insertions, 1 deletions

diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 941d455000a7..af68ef7b0caa 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -446,13 +446,38 @@
 		};
 		usb0: usb@200000 {
 			compatible = "ti,da830-musb";
-			reg = <0x200000 0x10000>;
+			reg = <0x200000 0x1000>;
+			ranges;
 			interrupts = <58>;
 			interrupt-names = "mc";
 			dr_mode = "otg";
 			phys = <&usb_phy 0>;
 			phy-names = "usb-phy";
 			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			dmas = <&cppi41dma 0 0 &cppi41dma 1 0
+				&cppi41dma 2 0 &cppi41dma 3 0
+				&cppi41dma 0 1 &cppi41dma 1 1
+				&cppi41dma 2 1 &cppi41dma 3 1>;
+			dma-names =
+				"rx1", "rx2", "rx3", "rx4",
+				"tx1", "tx2", "tx3", "tx4";
+
+			cppi41dma: dma-controller@201000 {
+				compatible = "ti,da830-cppi41";
+				reg =  <0x201000 0x1000
+					0x202000 0x1000
+					0x204000 0x4000>;
+				reg-names = "controller",
+					    "scheduler", "queuemgr";
+				interrupts = <58>;
+				#dma-cells = <2>;
+				#dma-channels = <4>;
+				status = "okay";
+			};
 		};
 		sata: sata@218000 {
 			compatible = "ti,da850-ahci";
@@ -503,6 +528,8 @@
 			ti,ngpio = <144>;
 			ti,davinci-gpio-unbanked = <0>;
 			status = "disabled";
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 		pinconf: pin-controller@22c00c {
 			compatible = "ti,da850-pupd";