Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "A large part of the arm-soc patches are nowadays DT changes, adding
  support for new SoCs, boards and devices without changing kernel
  source.  The plan is still to move the devicetree files out of the
  kernel tree and reduce the amount of churn going on here, but we keep
  finding reasons to delay doing that.

  Changes are really all over the place, with little sticking out
  particularly.  We have contributions from a total of 116 people in
  this branch.

  Unfortunately, the size of this branch also causes a significant
  number of conflicts at the moment, typically when subsystem
  maintainers merge patches that change the driver at the same time as
  the dts files.  In most cases this could be avoided because the dts
  changes are supposed to be compatible in both ways, and we are asking
  everyone to send ARM dts changes through our tree only"

* tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits)
  dts: stmmac: Document the clocks property in the stmmac base document
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
  ARM: STi: stih416: Add support for the FSM Serial Flash Controller
  ARM: tegra: fix Dalmore pinctrl configuration
  ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
  ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND
  ARM: dts: Build all keystone dt blobs
  ARM: dts: keystone: Fix control register range for clktsip
  ARM: dts: keystone: Fix domain register range for clkfftc1
  ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
  ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
  ARM: dts: bcm21664: Add device tree files.
  ARM: DT: bcm21664: Device tree bindings
  ARM: efm32: properly namespace i2c location property
  ARM: efm32: fix unit address part in USART2 device nodes' names
  ARM: mvebu: Enable NAND controller in Armada 385-DB
  ARM: mvebu: Add support for NAND controller in Armada 38x SoC
  ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
  ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
  ...

1 files changed, 74 insertions, 3 deletions

diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
index 5a31c776513f..3c3964a99637 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
@@ -9,7 +9,7 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include "imx27-phytec-phycard-s-som.dts"
+#include "imx27-phytec-phycard-s-som.dtsi"
 
 / {
 	model = "Phytec pca100 rapid development kit";
@@ -37,9 +37,12 @@
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3v3: 3v3 {
+		reg_3v3: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3V3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -54,6 +57,8 @@
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
 	rtc@51 {
@@ -68,26 +73,92 @@
 	};
 };
 
+&iomuxc {
+	imx27-phycard-s-rdk {
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_owire1: owire1grp {
+			fsl,pins = <
+				MX27_PAD_RTCK__OWIRE 0x0
+			>;
+		};
+
+		pinctrl_sdhc2: sdhc2grp {
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK 0x0
+				MX27_PAD_SD2_CMD__SD2_CMD 0x0
+				MX27_PAD_SD2_D0__SD2_D0 0x0
+				MX27_PAD_SD2_D1__SD2_D1 0x0
+				MX27_PAD_SD2_D2__SD2_D2 0x0
+				MX27_PAD_SD2_D3__SD2_D3 0x0
+				MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+				MX27_PAD_UART1_CTS__UART1_CTS 0x0
+				MX27_PAD_UART1_RTS__UART1_RTS 0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX27_PAD_UART2_TXD__UART2_TXD 0x0
+				MX27_PAD_UART2_RXD__UART2_RXD 0x0
+				MX27_PAD_UART2_CTS__UART2_CTS 0x0
+				MX27_PAD_UART2_RTS__UART2_RTS 0x0
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX27_PAD_UART3_TXD__UART3_TXD 0x0
+				MX27_PAD_UART3_RXD__UART3_RXD 0x0
+				MX27_PAD_UART3_CTS__UART3_CTS 0x0
+				MX27_PAD_UART3_RTS__UART3_RTS 0x0
+			>;
+		};
+	};
+};
+
 &owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire1>;
 	status = "okay";
 };
 
 &sdhci2 {
-	cd-gpios = <&gpio3 29 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc2>;
+	cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &uart1 {
 	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &uart2 {
 	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 };
 
 &uart3 {
 	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
 };