diff options
| author |   David Jander <david@protonic.nl> | 2022-04-19 06:48:17 +0200 |
|---|---|---|
| committer |   Shawn Guo <shawnguo@kernel.org> | 2022-04-24 21:23:05 +0800 |
| commit | deebb9ba3a64acb8dabcedcf2845f86b48f0e7b4 (patch) | |
| tree | 5b7b217d1c24fb3e070f90a310b5f6b58eba8bc7 /arch/arm/boot/dts/imx6dl-victgo.dts | |
| parent | ARM: dts: imx6q-vicut1.dts: remove sata node (diff) | |
| download | linux-dev-deebb9ba3a64acb8dabcedcf2845f86b48f0e7b4.tar.xz linux-dev-deebb9ba3a64acb8dabcedcf2845f86b48f0e7b4.zip | |
ARM: dts: imx6dl-victgo.dts: update gpio names
Following changes was made:
- Add MDIO signal names
- Add missing ISB_IN2 name. Also correct ISB_nIN1. These two signals were used
together in older HW revisions. Later ISB_IN2 was removed. Software should
still be able to use both.
- Add missing CAN1 and UART line names
- Add missing ON1/2_CTRL line names
- fix CPU_* line names. The real signal names are without the CPU_ prefix, like
on imx6qdl-vicut1.dtsi
- Fix ETH_INT signal name
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm/boot/dts/imx6dl-victgo.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx6dl-victgo.dts | 41 |
1 files changed, 31 insertions, 10 deletions
diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts index 9cf4df3eaeb0..7fc5bb499cbc 100644 --- a/arch/arm/boot/dts/imx6dl-victgo.dts +++ b/arch/arm/boot/dts/imx6dl-victgo.dts @@ -408,8 +408,8 @@ "CAM2_MIRROR", "", "", "SMBALERT", "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", - "SD1_DATA3", "", "", - "", "", "", "", "", "", "", ""; + "SD1_DATA3", "ETH_MDIO", "", + "", "", "", "", "", "", "", "ETH_MDC"; }; &gpio2 { @@ -417,7 +417,7 @@ "YACO_WHEEL", "YACO_RADAR", "YACO_PTO", "", "", "", "", "", "", "LED_PWM", "", "", "", "", "", "", - "", "", "", "", "", "", "ISB_IN1", "ON_SWITCH", + "", "", "", "", "", "ISB_IN2", "ISB_nIN1", "ON_SWITCH", "POWER_LED", "", "", "", "", "", "", ""; }; @@ -426,18 +426,20 @@ "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1", - "CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ", + "CPU_ON1_FB", "USB_OTG_OC", "USB_OTG_PWR", "YACO_IRQ", "TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0", "YACO_RESET"; }; &gpio4 { gpio-line-names = - "", "", "", "", "", "", "", "", - "", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX", - "", "", "DIP1_FB", "", "VCAM_EN", "", "", "", - "CPU_LIGHT_ON", "", "ETH_RESET", "CPU_CONTACT_IN", "BL_EN", - "BL_PWM", "ETH_INTRP", "ISB_LED"; + "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", + "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", + "CAN2_SR", "CAN2_TX", "CAN2_RX", + "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL", + "HITCH_IN_OUT", + "LIGHT_ON", "", "ETH_RESET", "CONTACT_IN", "BL_EN", + "BL_PWM", "ETH_INT", "ISB_LED"; }; &gpio5 { @@ -445,11 +447,30 @@ "", "", "", "", "", "", "", "", "TSC_PENIRQ", "TSC_BUSY", "ECSPI2_MOSI", "ECSPI2_MISO", "ECSPI2_SS0", "ECSPI2_SCLK", "", "", - "", "", "", "", "", "", "", "", + "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", + "I2S_BITCLK", "I2S_DOUT", "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; }; +&gpio6 { + gpio-line-names = + "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", + "ITU656_D6", "ITU656_D7", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio7 { + gpio-line-names = + "EMMC_DAT5", "EMMC_DAT4", "EMMC_CMD", "EMMC_CLK", "EMMC_DAT0", + "EMMC_DAT1", "EMMC_DAT2", "EMMC_DAT3", + "EMMC_RST", "", "", "", "CAM_DETECT", "", "", "", + "", "EMMC_DAT7", "EMMC_DAT6", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; |