Merge tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC i.MX DT changes from Olof Johansson:
 "This branch contains of devicetree changes for the Freescale i.MX
  platform.

  The base patch of the branch changes the format of the dts files to a
  slightly different format that makes it easier to do derivative board
  definitions, but it also introduces a lot of churn in the process
  since every line of the file is touched.

  On top of that are a handful of the regular changes; enabling more
  boards as DT-based instead of legacy board files (mx25pdk), enabling
  another driver for devicetree and thus adding bindings (onewire), etc.

  I'm not happy about the churn, and will likely not take it for other
  platforms in the future."

* tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  ARM: dts: add dtsi for imx6q and imx6dl
  ARM: dts: rename imx6q.dtsi to imx6qdl.dtsi
  ARM: dts: i.MX6: Add regulator delay support
  ARM: dts: Add device tree entry for onewire master on i.MX53
  ARM: i.MX53: Add clocks for i.mx53 onewire master.
  W1: Add device tree support to MXC onewire master.
  ARM: imx: enable imx6q-cpufreq support
  ARM: dts: Add apf51 basic support
  ARM i.MX6: change mxs usbphy clock usage
  ARM: dts: imx6q: Remove silicon version from SDMA firmware
  ARM i.MX53: dts: add oftree for MBa53 baseboard
  ARM i.MX53: add dts for the TQ tqma53 module
  ARM: dts: imx53: pinctrl update
  ARM i.MX51 babbage: Add keypad support
  ARM: dts: imx: Add imx51 KPP entry
  ARM: dts: imx25-karo-tx25: Put status entry in the end
  ARM: mx25pdk: Add device tree support
  ARM: dts: imx: use nodes label in board dts
  ARM: dts: add missing imx dtb targets
  ARM: boot: dts: Add an entry for imx27-pdk.dtb
  ...

1 files changed, 16 insertions, 780 deletions

diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index ff1205ea5719..cba021eb035e 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -1,33 +1,16 @@
+
 /*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
+ * Copyright 2013 Freescale Semiconductor, Inc.
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+/include/ "imx6qdl.dtsi"
 
 / {
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		gpio6 = &gpio7;
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -38,12 +21,19 @@
 			next-level-cache = <&L2>;
 			operating-points = <
 				/* kHz    uV */
-				792000  1100000
+				1200000 1275000
+				996000  1250000
+				792000  1150000
 				396000  950000
-				198000  850000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
-			cpu0-supply = <&reg_cpu>;
+			clocks = <&clks 104>, <&clks 6>, <&clks 16>,
+				 <&clks 17>, <&clks 170>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 
 		cpu@1 {
@@ -65,142 +55,9 @@
 		};
 	};
 
-	intc: interrupt-controller@00a01000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-controller;
-		reg = <0x00a01000 0x1000>,
-		      <0x00a00100 0x100>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-	};
-
 	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		dma-apbh@00110000 {
-			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
-			reg = <0x00110000 0x2000>;
-			clocks = <&clks 106>;
-		};
-
-		nfc: gpmi-nand@00112000 {
-			compatible = "fsl,imx6q-gpmi-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
-			reg-names = "gpmi-nand", "bch";
-			interrupts = <0 13 0x04>, <0 15 0x04>;
-			interrupt-names = "gpmi-dma", "bch";
-			clocks = <&clks 152>, <&clks 153>, <&clks 151>,
-				 <&clks 150>, <&clks 149>;
-			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
-				      "gpmi_bch_apb", "per1_bch";
-			fsl,gpmi-dma-channel = <0>;
-			status = "disabled";
-		};
-
-		timer@00a00600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x00a00600 0x20>;
-			interrupts = <1 13 0xf01>;
-		};
-
-		L2: l2-cache@00a02000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x00a02000 0x1000>;
-			interrupts = <0 92 0x04>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
 		aips-bus@02000000 { /* AIPS1 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02000000 0x100000>;
-			ranges;
-
 			spba-bus@02000000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x02000000 0x40000>;
-				ranges;
-
-				spdif: spdif@02004000 {
-					reg = <0x02004000 0x4000>;
-					interrupts = <0 52 0x04>;
-				};
-
-				ecspi1: ecspi@02008000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02008000 0x4000>;
-					interrupts = <0 31 0x04>;
-					clocks = <&clks 112>, <&clks 112>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi2: ecspi@0200c000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x0200c000 0x4000>;
-					interrupts = <0 32 0x04>;
-					clocks = <&clks 113>, <&clks 113>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi3: ecspi@02010000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02010000 0x4000>;
-					interrupts = <0 33 0x04>;
-					clocks = <&clks 114>, <&clks 114>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi4: ecspi@02014000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02014000 0x4000>;
-					interrupts = <0 34 0x04>;
-					clocks = <&clks 115>, <&clks 115>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
 				ecspi5: ecspi@02018000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -211,361 +68,6 @@
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
-
-				uart1: serial@02020000 {
-					compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-					reg = <0x02020000 0x4000>;
-					interrupts = <0 26 0x04>;
-					clocks = <&clks 160>, <&clks 161>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				esai: esai@02024000 {
-					reg = <0x02024000 0x4000>;
-					interrupts = <0 51 0x04>;
-				};
-
-				ssi1: ssi@02028000 {
-					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
-					reg = <0x02028000 0x4000>;
-					interrupts = <0 46 0x04>;
-					clocks = <&clks 178>;
-					fsl,fifo-depth = <15>;
-					fsl,ssi-dma-events = <38 37>;
-					status = "disabled";
-				};
-
-				ssi2: ssi@0202c000 {
-					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
-					reg = <0x0202c000 0x4000>;
-					interrupts = <0 47 0x04>;
-					clocks = <&clks 179>;
-					fsl,fifo-depth = <15>;
-					fsl,ssi-dma-events = <42 41>;
-					status = "disabled";
-				};
-
-				ssi3: ssi@02030000 {
-					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
-					reg = <0x02030000 0x4000>;
-					interrupts = <0 48 0x04>;
-					clocks = <&clks 180>;
-					fsl,fifo-depth = <15>;
-					fsl,ssi-dma-events = <46 45>;
-					status = "disabled";
-				};
-
-				asrc: asrc@02034000 {
-					reg = <0x02034000 0x4000>;
-					interrupts = <0 50 0x04>;
-				};
-
-				spba@0203c000 {
-					reg = <0x0203c000 0x4000>;
-				};
-			};
-
-			vpu: vpu@02040000 {
-				reg = <0x02040000 0x3c000>;
-				interrupts = <0 3 0x04 0 12 0x04>;
-			};
-
-			aipstz@0207c000 { /* AIPSTZ1 */
-				reg = <0x0207c000 0x4000>;
-			};
-
-			pwm1: pwm@02080000 {
-				#pwm-cells = <2>;
-				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
-				reg = <0x02080000 0x4000>;
-				interrupts = <0 83 0x04>;
-				clocks = <&clks 62>, <&clks 145>;
-				clock-names = "ipg", "per";
-			};
-
-			pwm2: pwm@02084000 {
-				#pwm-cells = <2>;
-				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
-				reg = <0x02084000 0x4000>;
-				interrupts = <0 84 0x04>;
-				clocks = <&clks 62>, <&clks 146>;
-				clock-names = "ipg", "per";
-			};
-
-			pwm3: pwm@02088000 {
-				#pwm-cells = <2>;
-				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
-				reg = <0x02088000 0x4000>;
-				interrupts = <0 85 0x04>;
-				clocks = <&clks 62>, <&clks 147>;
-				clock-names = "ipg", "per";
-			};
-
-			pwm4: pwm@0208c000 {
-				#pwm-cells = <2>;
-				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
-				reg = <0x0208c000 0x4000>;
-				interrupts = <0 86 0x04>;
-				clocks = <&clks 62>, <&clks 148>;
-				clock-names = "ipg", "per";
-			};
-
-			can1: flexcan@02090000 {
-				reg = <0x02090000 0x4000>;
-				interrupts = <0 110 0x04>;
-			};
-
-			can2: flexcan@02094000 {
-				reg = <0x02094000 0x4000>;
-				interrupts = <0 111 0x04>;
-			};
-
-			gpt: gpt@02098000 {
-				compatible = "fsl,imx6q-gpt";
-				reg = <0x02098000 0x4000>;
-				interrupts = <0 55 0x04>;
-			};
-
-			gpio1: gpio@0209c000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x0209c000 0x4000>;
-				interrupts = <0 66 0x04 0 67 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@020a0000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020a0000 0x4000>;
-				interrupts = <0 68 0x04 0 69 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio3: gpio@020a4000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020a4000 0x4000>;
-				interrupts = <0 70 0x04 0 71 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio4: gpio@020a8000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020a8000 0x4000>;
-				interrupts = <0 72 0x04 0 73 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio5: gpio@020ac000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020ac000 0x4000>;
-				interrupts = <0 74 0x04 0 75 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio6: gpio@020b0000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020b0000 0x4000>;
-				interrupts = <0 76 0x04 0 77 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio7: gpio@020b4000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
-				reg = <0x020b4000 0x4000>;
-				interrupts = <0 78 0x04 0 79 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			kpp: kpp@020b8000 {
-				reg = <0x020b8000 0x4000>;
-				interrupts = <0 82 0x04>;
-			};
-
-			wdog1: wdog@020bc000 {
-				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
-				reg = <0x020bc000 0x4000>;
-				interrupts = <0 80 0x04>;
-				clocks = <&clks 0>;
-			};
-
-			wdog2: wdog@020c0000 {
-				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
-				reg = <0x020c0000 0x4000>;
-				interrupts = <0 81 0x04>;
-				clocks = <&clks 0>;
-				status = "disabled";
-			};
-
-			clks: ccm@020c4000 {
-				compatible = "fsl,imx6q-ccm";
-				reg = <0x020c4000 0x4000>;
-				interrupts = <0 87 0x04 0 88 0x04>;
-				#clock-cells = <1>;
-			};
-
-			anatop: anatop@020c8000 {
-				compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
-				reg = <0x020c8000 0x1000>;
-				interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
-
-				regulator-1p1@110 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd1p1";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1375000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x110>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <4>;
-					anatop-min-voltage = <800000>;
-					anatop-max-voltage = <1375000>;
-				};
-
-				regulator-3p0@120 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd3p0";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <3150000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x120>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <0>;
-					anatop-min-voltage = <2625000>;
-					anatop-max-voltage = <3400000>;
-				};
-
-				regulator-2p5@130 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd2p5";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2750000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x130>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <0>;
-					anatop-min-voltage = <2000000>;
-					anatop-max-voltage = <2750000>;
-				};
-
-				reg_cpu: regulator-vddcore@140 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "cpu";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <0>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-
-				regulator-vddpu@140 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vddpu";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <9>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-
-				regulator-vddsoc@140 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vddsoc";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <18>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-			};
-
-			usbphy1: usbphy@020c9000 {
-				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
-				reg = <0x020c9000 0x1000>;
-				interrupts = <0 44 0x04>;
-				clocks = <&clks 182>;
-			};
-
-			usbphy2: usbphy@020ca000 {
-				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
-				reg = <0x020ca000 0x1000>;
-				interrupts = <0 45 0x04>;
-				clocks = <&clks 183>;
-			};
-
-			snvs@020cc000 {
-				compatible = "fsl,sec-v4.0-mon", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x020cc000 0x4000>;
-
-				snvs-rtc-lp@34 {
-					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					reg = <0x34 0x58>;
-					interrupts = <0 19 0x04 0 20 0x04>;
-				};
-			};
-
-			epit1: epit@020d0000 { /* EPIT1 */
-				reg = <0x020d0000 0x4000>;
-				interrupts = <0 56 0x04>;
-			};
-
-			epit2: epit@020d4000 { /* EPIT2 */
-				reg = <0x020d4000 0x4000>;
-				interrupts = <0 57 0x04>;
-			};
-
-			src: src@020d8000 {
-				compatible = "fsl,imx6q-src";
-				reg = <0x020d8000 0x4000>;
-				interrupts = <0 91 0x04 0 96 0x04>;
-			};
-
-			gpc: gpc@020dc000 {
-				compatible = "fsl,imx6q-gpc";
-				reg = <0x020dc000 0x4000>;
-				interrupts = <0 89 0x04 0 90 0x04>;
-			};
-
-			gpr: iomuxc-gpr@020e0000 {
-				compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
-				reg = <0x020e0000 0x38>;
 			};
 
 			iomuxc: iomuxc@020e0000 {
@@ -780,272 +282,6 @@
 					};
 				};
 			};
-
-			dcic1: dcic@020e4000 {
-				reg = <0x020e4000 0x4000>;
-				interrupts = <0 124 0x04>;
-			};
-
-			dcic2: dcic@020e8000 {
-				reg = <0x020e8000 0x4000>;
-				interrupts = <0 125 0x04>;
-			};
-
-			sdma: sdma@020ec000 {
-				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
-				reg = <0x020ec000 0x4000>;
-				interrupts = <0 2 0x04>;
-				clocks = <&clks 155>, <&clks 155>;
-				clock-names = "ipg", "ahb";
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q-to1.bin";
-			};
-		};
-
-		aips-bus@02100000 { /* AIPS2 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02100000 0x100000>;
-			ranges;
-
-			caam@02100000 {
-				reg = <0x02100000 0x40000>;
-				interrupts = <0 105 0x04 0 106 0x04>;
-			};
-
-			aipstz@0217c000 { /* AIPSTZ2 */
-				reg = <0x0217c000 0x4000>;
-			};
-
-			usbotg: usb@02184000 {
-				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-				reg = <0x02184000 0x200>;
-				interrupts = <0 43 0x04>;
-				clocks = <&clks 162>;
-				fsl,usbphy = <&usbphy1>;
-				fsl,usbmisc = <&usbmisc 0>;
-				status = "disabled";
-			};
-
-			usbh1: usb@02184200 {
-				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-				reg = <0x02184200 0x200>;
-				interrupts = <0 40 0x04>;
-				clocks = <&clks 162>;
-				fsl,usbphy = <&usbphy2>;
-				fsl,usbmisc = <&usbmisc 1>;
-				status = "disabled";
-			};
-
-			usbh2: usb@02184400 {
-				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-				reg = <0x02184400 0x200>;
-				interrupts = <0 41 0x04>;
-				clocks = <&clks 162>;
-				fsl,usbmisc = <&usbmisc 2>;
-				status = "disabled";
-			};
-
-			usbh3: usb@02184600 {
-				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-				reg = <0x02184600 0x200>;
-				interrupts = <0 42 0x04>;
-				clocks = <&clks 162>;
-				fsl,usbmisc = <&usbmisc 3>;
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc: usbmisc@02184800 {
-				#index-cells = <1>;
-				compatible = "fsl,imx6q-usbmisc";
-				reg = <0x02184800 0x200>;
-				clocks = <&clks 162>;
-			};
-
-			fec: ethernet@02188000 {
-				compatible = "fsl,imx6q-fec";
-				reg = <0x02188000 0x4000>;
-				interrupts = <0 118 0x04 0 119 0x04>;
-				clocks = <&clks 117>, <&clks 117>, <&clks 190>;
-				clock-names = "ipg", "ahb", "ptp";
-				status = "disabled";
-			};
-
-			mlb@0218c000 {
-				reg = <0x0218c000 0x4000>;
-				interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
-			};
-
-			usdhc1: usdhc@02190000 {
-				compatible = "fsl,imx6q-usdhc";
-				reg = <0x02190000 0x4000>;
-				interrupts = <0 22 0x04>;
-				clocks = <&clks 163>, <&clks 163>, <&clks 163>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc2: usdhc@02194000 {
-				compatible = "fsl,imx6q-usdhc";
-				reg = <0x02194000 0x4000>;
-				interrupts = <0 23 0x04>;
-				clocks = <&clks 164>, <&clks 164>, <&clks 164>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc3: usdhc@02198000 {
-				compatible = "fsl,imx6q-usdhc";
-				reg = <0x02198000 0x4000>;
-				interrupts = <0 24 0x04>;
-				clocks = <&clks 165>, <&clks 165>, <&clks 165>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc4: usdhc@0219c000 {
-				compatible = "fsl,imx6q-usdhc";
-				reg = <0x0219c000 0x4000>;
-				interrupts = <0 25 0x04>;
-				clocks = <&clks 166>, <&clks 166>, <&clks 166>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@021a0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
-				reg = <0x021a0000 0x4000>;
-				interrupts = <0 36 0x04>;
-				clocks = <&clks 125>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@021a4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
-				reg = <0x021a4000 0x4000>;
-				interrupts = <0 37 0x04>;
-				clocks = <&clks 126>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@021a8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
-				reg = <0x021a8000 0x4000>;
-				interrupts = <0 38 0x04>;
-				clocks = <&clks 127>;
-				status = "disabled";
-			};
-
-			romcp@021ac000 {
-				reg = <0x021ac000 0x4000>;
-			};
-
-			mmdc0: mmdc@021b0000 { /* MMDC0 */
-				compatible = "fsl,imx6q-mmdc";
-				reg = <0x021b0000 0x4000>;
-			};
-
-			mmdc1: mmdc@021b4000 { /* MMDC1 */
-				reg = <0x021b4000 0x4000>;
-			};
-
-			weim@021b8000 {
-				reg = <0x021b8000 0x4000>;
-				interrupts = <0 14 0x04>;
-			};
-
-			ocotp@021bc000 {
-				reg = <0x021bc000 0x4000>;
-			};
-
-			ocotp@021c0000 {
-				reg = <0x021c0000 0x4000>;
-				interrupts = <0 21 0x04>;
-			};
-
-			tzasc@021d0000 { /* TZASC1 */
-				reg = <0x021d0000 0x4000>;
-				interrupts = <0 108 0x04>;
-			};
-
-			tzasc@021d4000 { /* TZASC2 */
-				reg = <0x021d4000 0x4000>;
-				interrupts = <0 109 0x04>;
-			};
-
-			audmux: audmux@021d8000 {
-				compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
-				reg = <0x021d8000 0x4000>;
-				status = "disabled";
-			};
-
-			mipi@021dc000 { /* MIPI-CSI */
-				reg = <0x021dc000 0x4000>;
-			};
-
-			mipi@021e0000 { /* MIPI-DSI */
-				reg = <0x021e0000 0x4000>;
-			};
-
-			vdoa@021e4000 {
-				reg = <0x021e4000 0x4000>;
-				interrupts = <0 18 0x04>;
-			};
-
-			uart2: serial@021e8000 {
-				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021e8000 0x4000>;
-				interrupts = <0 27 0x04>;
-				clocks = <&clks 160>, <&clks 161>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart3: serial@021ec000 {
-				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021ec000 0x4000>;
-				interrupts = <0 28 0x04>;
-				clocks = <&clks 160>, <&clks 161>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart4: serial@021f0000 {
-				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021f0000 0x4000>;
-				interrupts = <0 29 0x04>;
-				clocks = <&clks 160>, <&clks 161>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart5: serial@021f4000 {
-				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021f4000 0x4000>;
-				interrupts = <0 30 0x04>;
-				clocks = <&clks 160>, <&clks 161>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-		};
-
-		ipu1: ipu@02400000 {
-			#crtc-cells = <1>;
-			compatible = "fsl,imx6q-ipu";
-			reg = <0x02400000 0x400000>;
-			interrupts = <0 6 0x4 0 5 0x4>;
-			clocks = <&clks 130>, <&clks 131>, <&clks 132>;
-			clock-names = "bus", "di0", "di1";
 		};
 
 		ipu2: ipu@02800000 {