diff options
| author |   Linus Walleij <linus.walleij@linaro.org> | 2017-01-12 15:22:42 +0100 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2017-01-31 22:14:47 +0100 |
| commit | 6097c2d0afa4ff70ece8610875a0f0592064de29 (patch) | |
| tree | c82d205ea9839ac883d3207344ea3896b0a3cae2 /arch/arm/boot/dts/ste-snowball.dts | |
| parent | ARM: dts: push MMC/SD to board and add comments (diff) | |
| download | linux-dev-6097c2d0afa4ff70ece8610875a0f0592064de29.tar.xz linux-dev-6097c2d0afa4ff70ece8610875a0f0592064de29.zip | |
ARM: dts: Ux500: move USB PHY pins to PHY device
The physical pins from the SoC are in a sense belonging to the
PHY device (AB8500 USB) rather than the MUSB USB IP block.
The driver definately assumes so: before this change it
complains that it cannot control the pins it is using:
abx5x0-usb ab8500-usb.0: could not get/set default pinstate
After this patch the warning goes away.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/ste-snowball.dts')
| -rw-r--r-- | arch/arm/boot/dts/ste-snowball.dts | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 7900e5d6aa05..d5f61256fe56 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -159,12 +159,6 @@ "", "", "", "", "", "", "", ""; }; - usb_per5@a03e0000 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&musb_default_mode>; - pinctrl-1 = <&musb_sleep_mode>; - }; - sound { compatible = "stericsson,snd-soc-mop500"; @@ -451,6 +445,12 @@ "PM_GPIO42"; /* AB8500 GPIO42 */ }; + ab8500_usb { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&musb_default_mode>; + pinctrl-1 = <&musb_sleep_mode>; + }; + ext_regulators: ab8500-ext-regulators { ab8500_ext1_reg: ab8500_ext1 { regulator-name = "ab8500-ext-supply1"; |