diff options
| author |   Chen-Yu Tsai <wens@csie.org> | 2018-05-02 00:12:24 +0800 |
|---|---|---|
| committer | Chen-Yu Tsai <wens@csie.org> | 2018-05-17 14:03:42 +0800 |
| commit | 76f803223b4a7f47949125e8e4aecb30fc545810 (patch) | |
| tree | 5fb7d039a34e8b51cfd41627cc6f33d590761ef8 /arch/arm/boot/dts/sun8i-r40.dtsi | |
| parent | ARM: dts: sun8i: r40: bananapi-m2-ultra: Sort device node dereferences (diff) | |
| download | linux-dev-76f803223b4a7f47949125e8e4aecb30fc545810.tar.xz linux-dev-76f803223b4a7f47949125e8e4aecb30fc545810.zip | |
ARM: dts: sun8i: r40: Add device node and RGMII pinmux node for GMAC
The R40 SoC has a GMAC (gigabit capable Ethernet controller). Add a
device node for it. The only publicly available board for this SoC
uses an RGMII PHY. Add a pinmux node for it as well.
Since this SoC also has an old 10/100 Mbps EMAC, which also has an
MDIO bus controller, the MDIO bus for the GMAC is labeled "gmac_mdio".
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Diffstat (limited to 'arch/arm/boot/dts/sun8i-r40.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/sun8i-r40.dtsi | 34 |
1 files changed, 34 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index 173dcc1652d2..bd97ca3dc2fa 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -265,6 +265,19 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + gmac_rgmii_pins: gmac-rgmii-pins { + pins = "PA0", "PA1", "PA2", "PA3", + "PA4", "PA5", "PA6", "PA7", + "PA8", "PA10", "PA11", "PA12", + "PA13", "PA15", "PA16"; + function = "gmac"; + /* + * data lines in RGMII mode use DDR mode + * and need a higher signal drive strength + */ + drive-strength = <40>; + }; + i2c0_pins: i2c0-pins { pins = "PB0", "PB1"; function = "i2c0"; @@ -451,6 +464,27 @@ #size-cells = <0>; }; + gmac: ethernet@1c50000 { + compatible = "allwinner,sun8i-r40-gmac"; + syscon = <&ccu>; + reg = <0x01c50000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_GMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_GMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + gmac_mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, |