diff options
| author |   Chen-Yu Tsai <wens@csie.org> | 2015-02-03 06:22:03 +0800 |
|---|---|---|
| committer |   Maxime Ripard <maxime.ripard@free-electrons.com> | 2015-04-27 08:20:18 +0200 |
| commit | fa86885b6bc75e73d2f24ada02ccb74cab9c73c1 (patch) | |
| tree | e3b79beb228bd8ef5c3999d6f5b481ba8d1e8183 /arch/arm/boot/dts/sun9i-a80-optimus.dts | |
| parent | ARM: dts: sun9i: Add USB host controller nodes to a80 dtsi (diff) | |
| download | linux-dev-fa86885b6bc75e73d2f24ada02ccb74cab9c73c1.tar.xz linux-dev-fa86885b6bc75e73d2f24ada02ccb74cab9c73c1.zip | |
ARM: dts: sun9i: Enable USB support on A80 Optimus board
On the Optimus board, all three USB hosts can be used.
HCI0 and HCI2 are available through the USB connector.
HCI1 is available with HSIC through 2 pins on the GPIO
expansion header.
This patch also adds a regulator for HCI2/USB3's VBUS.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Diffstat (limited to 'arch/arm/boot/dts/sun9i-a80-optimus.dts')
| -rw-r--r-- | arch/arm/boot/dts/sun9i-a80-optimus.dts | 65 |
1 files changed, 65 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index a3fed2bdf620..e53f2656c2d0 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -86,6 +86,29 @@ gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; }; }; + + reg_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_pin_optimus>; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; }; &i2c3 { @@ -99,6 +122,14 @@ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; +&ohci0 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + &pio { led_pins_optimus: led-pins@0 { allwinner,pins = "PH0", "PH1"; @@ -113,6 +144,20 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + + usb1_vbus_pin_optimus: usb1_vbus_pin@1 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb3_vbus_pin_optimus: usb3_vbus_pin@1 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; &mmc0 { @@ -134,6 +179,12 @@ status = "okay"; }; +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_optimus>; + gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -150,3 +201,17 @@ /* Enable internal pull-up */ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + +&usbphy1 { + vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; + +&usbphy3 { + vbus-supply = <®_usb3_vbus>; + status = "okay"; +}; |