Merge tag 'ux500-devicetree-for-v3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt

From: Linus Walleij:
Ux500 device tree enablement base for the v3.12
development cycle:
- Various cleanups like remove non-existant hardware from
  the Snowball device tree, prefix all files with "ste-*"
- External regulators
- Documentation updates
- Delete some minor dangling platform data
- Pin control settings for U8540 through DT

* tag 'ux500-devicetree-for-v3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: (22 commits)
  ARM: ux500: fix devicetree builds
  ARM: ux500: Remove u9540.dts as it's been replaced
  ARM: ux500: Apply a ste-* prefix onto dbx5x0.dtsi
  ARM: ux500: Apply a ste-* prefix onto stuib.dtsi
  ARM: ux500: Apply a ste-* prefix onto hrefv60plus.dts
  ARM: ux500: Apply a ste-* prefix onto hrefprev60.dts Signed-off-by: Lee Jones <lee.jones@linaro.org>
  ARM: ux500: Apply a ste-* prefix onto href.dtsi
  ARM: ux500: Apply a ste-* prefix onto ccu9540.dts
  ARM: ux500: Apply a ste-* prefix onto ccu8540.dts
  ARM: ux500: Apply a ste-* prefix onto snowball.dts
  ARM: ux500: Remove Snowball DTS entry for ROHM BH1780GLI ambient light sensor
  ARM: ux500: Remove Snowball DTS entry for TPS61052 chip
  ARM: ux500: Remove Snowball DTS entry for National Semiconductor LP5521 LED chip
  ARM: ux500: Remove Toshiba TC35892 I/O Expander's DT entry from Snowball's DTS
  ARM: u8540: DT: Set pinctrl mapping to i2c0,1,2,4 & 5
  ARM: u8540: Add Pinctrl Device Tree settings for uart0, uart2
  ARM: ux500: Stop passing MMC's platform data for Device Tree boots
  Documentation: Update binding for Nomadik and DBx5x based platforms
  ARM: ux500: Supply external regulator names for Snowball's DT
  ARM: ux500: Provide a supply name for the AB8500 AUX regulators to use
  ...

1 files changed, 0 insertions, 72 deletions

diff --git a/arch/arm/boot/dts/u9540.dts b/arch/arm/boot/dts/u9540.dts
deleted file mode 100644
index 95892ec6c342..000000000000
--- a/arch/arm/boot/dts/u9540.dts
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "dbx5x0.dtsi"
-
-/ {
-	model = "ST-Ericsson U9540 platform with Device Tree";
-	compatible = "st-ericsson,u9540";
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	soc-u9500 {
-		uart@80120000 {
-			status = "okay";
-		};
-
-		uart@80121000 {
-			status = "okay";
-		};
-
-		uart@80007000 {
-			status = "okay";
-		};
-
-		// External Micro SD slot
-		sdi0_per1@80126000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <4>;
-			mmc-cap-sd-highspeed;
-			mmc-cap-mmc-highspeed;
-			vmmc-supply = <&ab8500_ldo_aux3_reg>;
-
-			cd-gpios  = <&gpio7 6 0x4>; // 230
-			cd-inverted;
-
-			status = "okay";
-		};
-
-
-		// WLAN SDIO channel
-		sdi1_per2@80118000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
-			bus-width = <4>;
-
-			status = "okay";
-		};
-
-		// On-board eMMC
-		sdi4_per2@80114000 {
-			arm,primecell-periphid = <0x10480180>;
-		        max-frequency = <100000000>;
-			bus-width = <8>;
-			mmc-cap-mmc-highspeed;
-			vmmc-supply = <&ab8500_ldo_aux2_reg>;
-
-			status = "okay";
-		};
-	};
-};