ARM: PMU: Add runtime PM Support

Add runtime PM support to the ARM PMU driver so that devices such as OMAP
supporting dynamic PM can use the platform->runtime_* hooks to initialise
hardware at runtime. Without having these runtime PM hooks in place any
configuration of the PMU hardware would be lost when low power states are
entered and hence would prevent PMU from working.

This change also replaces the PMU platform functions enable_irq and disable_irq
added by Ming Lei with runtime_resume and runtime_suspend funtions. Ming had
added the enable_irq and disable_irq functions as a method to configure the
cross trigger interface on OMAP4 for routing the PMU interrupts. By adding
runtime PM support, we can move the code called by enable_irq and disable_irq
into the runtime PM callbacks runtime_resume and runtime_suspend.

Cc: Ming Lei <ming.lei@canonical.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

1 files changed, 33 insertions, 8 deletions

diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index ab243b87118d..c44647ef7357 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -20,6 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 #include <linux/uaccess.h>
+#include <linux/pm_runtime.h>
 
 #include <asm/cputype.h>
 #include <asm/irq.h>
@@ -364,8 +365,6 @@ armpmu_release_hardware(struct arm_pmu *armpmu)
 {
 	int i, irq, irqs;
 	struct platform_device *pmu_device = armpmu->plat_device;
-	struct arm_pmu_platdata *plat =
-		dev_get_platdata(&pmu_device->dev);
 
 	irqs = min(pmu_device->num_resources, num_possible_cpus());
 
@@ -373,13 +372,11 @@ armpmu_release_hardware(struct arm_pmu *armpmu)
 		if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs))
 			continue;
 		irq = platform_get_irq(pmu_device, i);
-		if (irq >= 0) {
-			if (plat && plat->disable_irq)
-				plat->disable_irq(irq);
+		if (irq >= 0)
 			free_irq(irq, armpmu);
-		}
 	}
 
+	pm_runtime_put_sync(&pmu_device->dev);
 	release_pmu(armpmu->type);
 }
 
@@ -412,6 +409,8 @@ armpmu_reserve_hardware(struct arm_pmu *armpmu)
 		return -ENODEV;
 	}
 
+	pm_runtime_get_sync(&pmu_device->dev);
+
 	for (i = 0; i < irqs; ++i) {
 		err = 0;
 		irq = platform_get_irq(pmu_device, i);
@@ -437,8 +436,7 @@ armpmu_reserve_hardware(struct arm_pmu *armpmu)
 				irq);
 			armpmu_release_hardware(armpmu);
 			return err;
-		} else if (plat && plat->enable_irq)
-			plat->enable_irq(irq);
+		}
 
 		cpumask_set_cpu(i, &armpmu->active_irqs);
 	}
@@ -581,6 +579,28 @@ static void armpmu_disable(struct pmu *pmu)
 	armpmu->stop();
 }
 
+#ifdef CONFIG_PM_RUNTIME
+static int armpmu_runtime_resume(struct device *dev)
+{
+	struct arm_pmu_platdata *plat = dev_get_platdata(dev);
+
+	if (plat && plat->runtime_resume)
+		return plat->runtime_resume(dev);
+
+	return 0;
+}
+
+static int armpmu_runtime_suspend(struct device *dev)
+{
+	struct arm_pmu_platdata *plat = dev_get_platdata(dev);
+
+	if (plat && plat->runtime_suspend)
+		return plat->runtime_suspend(dev);
+
+	return 0;
+}
+#endif
+
 static void __init armpmu_init(struct arm_pmu *armpmu)
 {
 	atomic_set(&armpmu->active_events, 0);
@@ -647,9 +667,14 @@ static int __devinit armpmu_device_probe(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct dev_pm_ops armpmu_dev_pm_ops = {
+	SET_RUNTIME_PM_OPS(armpmu_runtime_suspend, armpmu_runtime_resume, NULL)
+};
+
 static struct platform_driver armpmu_driver = {
 	.driver		= {
 		.name	= "arm-pmu",
+		.pm	= &armpmu_dev_pm_ops,
 		.of_match_table = armpmu_of_device_ids,
 	},
 	.probe		= armpmu_device_probe,