Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC specific changes from Arnd Bergmann:
 "These changes are all to SoC-specific code, a total of 33 branches on
  17 platforms were pulled into this.  Like last time, Renesas sh-mobile
  is now the platform with the most changes, followed by OMAP and
  EXYNOS.

  Two new platforms, TI Keystone and Rockchips RK3xxx are added in this
  branch, both containing almost no platform specific code at all, since
  they are using generic subsystem interfaces for clocks, pinctrl,
  interrupts etc.  The device drivers are getting merged through the
  respective subsystem maintainer trees.

  One more SoC (u300) is now multiplatform capable and several others
  (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
  towards that goal with this series but need more work.

  Also noteworthy is the work on PCI here, which is traditionally part
  of the SoC specific code.  With the changes done by Thomas Petazzoni,
  we can now more easily have PCI host controller drivers as loadable
  modules and keep them separate from the platform code in
  drivers/pci/host.  This has already led to the discovery that three
  platforms (exynos, spear and imx) are actually using an identical PCIe
  host controller and will be able to share a driver once support for
  spear and imx is added."

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits)
  ARM: integrator: let pciv3 use mem/premem from device tree
  ARM: integrator: set local side PCI addresses right
  ARM: dts: Add pcie controller node for exynos5440-ssdk5440
  ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC
  ARM: EXYNOS: Enable PCIe support for Exynos5440
  pci: Add PCIe driver for Samsung Exynos
  ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
  ARM: keystone: Move CPU bringup code to dedicated asm file
  ARM: multiplatform: always pick one CPU type
  ARM: imx: select syscon for IMX6SL
  ARM: keystone: select ARM_ERRATA_798181 only for SMP
  ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1
  ARM: OMAP2+: AM43x: resolve SMP related build error
  dmaengine: edma: enable build for AM33XX
  ARM: edma: Add EDMA crossbar event mux support
  ARM: edma: Add DT and runtime PM support to the private EDMA API
  dmaengine: edma: Add TI EDMA device tree binding
  arm: add basic support for Rockchip RK3066a boards
  arm: add debug uarts for rockchip rk29xx and rk3xxx series
  arm: Add basic clocks for Rockchip rk3066a SoCs
  ...

15 files changed, 55 insertions, 1909 deletions

diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index dd1ffccc75e9..63997a1128e6 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,7 +5,7 @@
 
 # Common objects
 obj-y 			:= time.o clock.o serial.o psc.o \
-			   dma.o usb.o common.o sram.o aemif.o
+			   usb.o common.o sram.o aemif.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index ba798370fc96..78ea395d2aca 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -26,12 +26,12 @@
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
+#include <linux/platform_data/edma.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
 #include <mach/irqs.h>
-#include <mach/edma.h>
 #include <mach/mux.h>
 #include <mach/cp_intc.h>
 #include <mach/tnetv107x.h>
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index 1ab3df423dac..a883043d0820 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -23,9 +23,9 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/platform_data/davinci_asp.h>
+#include <linux/platform_data/edma.h>
 #include <linux/platform_data/keyscan-davinci.h>
 #include <mach/hardware.h>
-#include <mach/edma.h>
 
 #include <media/davinci/vpfe_capture.h>
 #include <media/davinci/vpif_types.h>
@@ -77,32 +77,32 @@ void davinci_map_sysmod(void);
 #define DM646X_ASYNC_EMIF_CS2_SPACE_BASE 0x42000000
 
 /* DM355 function declarations */
-void __init dm355_init(void);
+void dm355_init(void);
 void dm355_init_spi0(unsigned chipselect_mask,
 		const struct spi_board_info *info, unsigned len);
-void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
+void dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
 int dm355_init_video(struct vpfe_config *, struct vpbe_config *);
 
 /* DM365 function declarations */
-void __init dm365_init(void);
-void __init dm365_init_asp(struct snd_platform_data *pdata);
-void __init dm365_init_vc(struct snd_platform_data *pdata);
-void __init dm365_init_ks(struct davinci_ks_platform_data *pdata);
-void __init dm365_init_rtc(void);
+void dm365_init(void);
+void dm365_init_asp(struct snd_platform_data *pdata);
+void dm365_init_vc(struct snd_platform_data *pdata);
+void dm365_init_ks(struct davinci_ks_platform_data *pdata);
+void dm365_init_rtc(void);
 void dm365_init_spi0(unsigned chipselect_mask,
 			const struct spi_board_info *info, unsigned len);
 int dm365_init_video(struct vpfe_config *, struct vpbe_config *);
 
 /* DM644x function declarations */
-void __init dm644x_init(void);
-void __init dm644x_init_asp(struct snd_platform_data *pdata);
-int __init dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
+void dm644x_init(void);
+void dm644x_init_asp(struct snd_platform_data *pdata);
+int dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
 
 /* DM646x function declarations */
-void __init dm646x_init(void);
-void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
-void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
-int __init dm646x_init_edma(struct edma_rsv_info *rsv);
+void dm646x_init(void);
+void dm646x_init_mcasp0(struct snd_platform_data *pdata);
+void dm646x_init_mcasp1(struct snd_platform_data *pdata);
+int dm646x_init_edma(struct edma_rsv_info *rsv);
 void dm646x_video_init(void);
 void dm646x_setup_vpif(struct vpif_display_config *,
 		       struct vpif_capture_config *);
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index bf572525175d..eb254fe861ac 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -105,27 +105,27 @@ struct platform_device da8xx_serial_device = {
 	},
 };
 
-static const s8 da8xx_queue_tc_mapping[][2] = {
+static s8 da8xx_queue_tc_mapping[][2] = {
 	/* {event queue no, TC no} */
 	{0, 0},
 	{1, 1},
 	{-1, -1}
 };
 
-static const s8 da8xx_queue_priority_mapping[][2] = {
+static s8 da8xx_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
 	{1, 7},
 	{-1, -1}
 };
 
-static const s8 da850_queue_tc_mapping[][2] = {
+static s8 da850_queue_tc_mapping[][2] = {
 	/* {event queue no, TC no} */
 	{0, 0},
 	{-1, -1}
 };
 
-static const s8 da850_queue_priority_mapping[][2] = {
+static s8 da850_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
 	{-1, -1}
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
index cfb194df18ed..128cb9ae80f4 100644
--- a/arch/arm/mach-davinci/devices-tnetv107x.c
+++ b/arch/arm/mach-davinci/devices-tnetv107x.c
@@ -18,10 +18,10 @@
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
 #include <linux/slab.h>
+#include <linux/platform_data/edma.h>
 
 #include <mach/common.h>
 #include <mach/irqs.h>
-#include <mach/edma.h>
 #include <mach/tnetv107x.h>
 
 #include "clock.h"
@@ -58,14 +58,14 @@
 #define TNETV107X_DMACH_SDIO1_RX		28
 #define TNETV107X_DMACH_SDIO1_TX		29
 
-static const s8 edma_tc_mapping[][2] = {
+static s8 edma_tc_mapping[][2] = {
 	/* event queue no	TC no	*/
 	{	 0,		 0	},
 	{	 1,		 1	},
 	{	-1,		-1	}
 };
 
-static const s8 edma_priority_mapping[][2] = {
+static s8 edma_priority_mapping[][2] = {
 	/* event queue no	Prio	*/
 	{	 0,		 3	},
 	{	 1,		 7	},
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index a7068a3aa9d3..90b83d00fe2b 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -19,9 +19,10 @@
 #include <mach/irqs.h>
 #include <mach/cputype.h>
 #include <mach/mux.h>
-#include <mach/edma.h>
 #include <linux/platform_data/mmc-davinci.h>
 #include <mach/time.h>
+#include <linux/platform_data/edma.h>
+
 
 #include "davinci.h"
 #include "clock.h"
@@ -34,6 +35,9 @@
 #define DM365_MMCSD0_BASE	     0x01D11000
 #define DM365_MMCSD1_BASE	     0x01D00000
 
+#define DAVINCI_DMA_MMCRXEVT	26
+#define DAVINCI_DMA_MMCTXEVT	27
+
 void __iomem  *davinci_sysmod_base;
 
 void davinci_map_sysmod(void)
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index a11034a358f1..42ef53f62c6c 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -19,7 +19,6 @@
 #include <asm/mach/map.h>
 
 #include <mach/cputype.h>
-#include <mach/edma.h>
 #include <mach/psc.h>
 #include <mach/mux.h>
 #include <mach/irqs.h>
@@ -28,6 +27,7 @@
 #include <mach/common.h>
 #include <linux/platform_data/spi-davinci.h>
 #include <mach/gpio-davinci.h>
+#include <linux/platform_data/edma.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -569,7 +569,7 @@ static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 
 /*----------------------------------------------------------------------*/
 
-static const s8
+static s8
 queue_tc_mapping[][2] = {
 	/* {event queue no, TC no} */
 	{0, 0},
@@ -577,7 +577,7 @@ queue_tc_mapping[][2] = {
 	{-1, -1},
 };
 
-static const s8
+static s8
 queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 40fa4fee9331..fa7af5eda52d 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -18,11 +18,11 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/spi/spi.h>
+#include <linux/platform_data/edma.h>
 
 #include <asm/mach/map.h>
 
 #include <mach/cputype.h>
-#include <mach/edma.h>
 #include <mach/psc.h>
 #include <mach/mux.h>
 #include <mach/irqs.h>
@@ -826,7 +826,7 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 };
 
 /* Four Transfer Controllers on DM365 */
-static const s8
+static s8
 dm365_queue_tc_mapping[][2] = {
 	/* {event queue no, TC no} */
 	{0, 0},
@@ -836,7 +836,7 @@ dm365_queue_tc_mapping[][2] = {
 	{-1, -1},
 };
 
-static const s8
+static s8
 dm365_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 7},
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 4d37d3e2a193..a49d18246fe9 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -12,11 +12,11 @@
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/edma.h>
 
 #include <asm/mach/map.h>
 
 #include <mach/cputype.h>
-#include <mach/edma.h>
 #include <mach/irqs.h>
 #include <mach/psc.h>
 #include <mach/mux.h>
@@ -497,7 +497,7 @@ static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 
 /*----------------------------------------------------------------------*/
 
-static const s8
+static s8
 queue_tc_mapping[][2] = {
 	/* {event queue no, TC no} */
 	{0, 0},
@@ -505,7 +505,7 @@ queue_tc_mapping[][2] = {
 	{-1, -1},
 };
 
-static const s8
+static s8
 queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index ac7b431c4c8e..d1259e80141b 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -13,11 +13,11 @@
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/edma.h>
 
 #include <asm/mach/map.h>
 
 #include <mach/cputype.h>
-#include <mach/edma.h>
 #include <mach/irqs.h>
 #include <mach/psc.h>
 #include <mach/mux.h>
@@ -531,7 +531,7 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 /*----------------------------------------------------------------------*/
 
 /* Four Transfer Controllers on DM646x */
-static const s8
+static s8
 dm646x_queue_tc_mapping[][2] = {
 	/* {event queue no, TC no} */
 	{0, 0},
@@ -541,7 +541,7 @@ dm646x_queue_tc_mapping[][2] = {
 	{-1, -1},
 };
 
-static const s8
+static s8
 dm646x_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 4},
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
deleted file mode 100644
index 45b7c71d9cc1..000000000000
--- a/arch/arm/mach-davinci/dma.c
+++ /dev/null
@@ -1,1591 +0,0 @@
-/*
- * EDMA3 support for DaVinci
- *
- * Copyright (C) 2006-2009 Texas Instruments.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <mach/edma.h>
-
-/* Offsets matching "struct edmacc_param" */
-#define PARM_OPT		0x00
-#define PARM_SRC		0x04
-#define PARM_A_B_CNT		0x08
-#define PARM_DST		0x0c
-#define PARM_SRC_DST_BIDX	0x10
-#define PARM_LINK_BCNTRLD	0x14
-#define PARM_SRC_DST_CIDX	0x18
-#define PARM_CCNT		0x1c
-
-#define PARM_SIZE		0x20
-
-/* Offsets for EDMA CC global channel registers and their shadows */
-#define SH_ER		0x00	/* 64 bits */
-#define SH_ECR		0x08	/* 64 bits */
-#define SH_ESR		0x10	/* 64 bits */
-#define SH_CER		0x18	/* 64 bits */
-#define SH_EER		0x20	/* 64 bits */
-#define SH_EECR		0x28	/* 64 bits */
-#define SH_EESR		0x30	/* 64 bits */
-#define SH_SER		0x38	/* 64 bits */
-#define SH_SECR		0x40	/* 64 bits */
-#define SH_IER		0x50	/* 64 bits */
-#define SH_IECR		0x58	/* 64 bits */
-#define SH_IESR		0x60	/* 64 bits */
-#define SH_IPR		0x68	/* 64 bits */
-#define SH_ICR		0x70	/* 64 bits */
-#define SH_IEVAL	0x78
-#define SH_QER		0x80
-#define SH_QEER		0x84
-#define SH_QEECR	0x88
-#define SH_QEESR	0x8c
-#define SH_QSER		0x90
-#define SH_QSECR	0x94
-#define SH_SIZE		0x200
-
-/* Offsets for EDMA CC global registers */
-#define EDMA_REV	0x0000
-#define EDMA_CCCFG	0x0004
-#define EDMA_QCHMAP	0x0200	/* 8 registers */
-#define EDMA_DMAQNUM	0x0240	/* 8 registers (4 on OMAP-L1xx) */
-#define EDMA_QDMAQNUM	0x0260
-#define EDMA_QUETCMAP	0x0280
-#define EDMA_QUEPRI	0x0284
-#define EDMA_EMR	0x0300	/* 64 bits */
-#define EDMA_EMCR	0x0308	/* 64 bits */
-#define EDMA_QEMR	0x0310
-#define EDMA_QEMCR	0x0314
-#define EDMA_CCERR	0x0318
-#define EDMA_CCERRCLR	0x031c
-#define EDMA_EEVAL	0x0320
-#define EDMA_DRAE	0x0340	/* 4 x 64 bits*/
-#define EDMA_QRAE	0x0380	/* 4 registers */
-#define EDMA_QUEEVTENTRY	0x0400	/* 2 x 16 registers */
-#define EDMA_QSTAT	0x0600	/* 2 registers */
-#define EDMA_QWMTHRA	0x0620
-#define EDMA_QWMTHRB	0x0624
-#define EDMA_CCSTAT	0x0640
-
-#define EDMA_M		0x1000	/* global channel registers */
-#define EDMA_ECR	0x1008
-#define EDMA_ECRH	0x100C
-#define EDMA_SHADOW0	0x2000	/* 4 regions shadowing global channels */
-#define EDMA_PARM	0x4000	/* 128 param entries */
-
-#define PARM_OFFSET(param_no)	(EDMA_PARM + ((param_no) << 5))
-
-#define EDMA_DCHMAP	0x0100  /* 64 registers */
-#define CHMAP_EXIST	BIT(24)
-
-#define EDMA_MAX_DMACH           64
-#define EDMA_MAX_PARAMENTRY     512
-
-/*****************************************************************************/
-
-static void __iomem *edmacc_regs_base[EDMA_MAX_CC];
-
-static inline unsigned int edma_read(unsigned ctlr, int offset)
-{
-	return (unsigned int)__raw_readl(edmacc_regs_base[ctlr] + offset);
-}
-
-static inline void edma_write(unsigned ctlr, int offset, int val)
-{
-	__raw_writel(val, edmacc_regs_base[ctlr] + offset);
-}
-static inline void edma_modify(unsigned ctlr, int offset, unsigned and,
-		unsigned or)
-{
-	unsigned val = edma_read(ctlr, offset);
-	val &= and;
-	val |= or;
-	edma_write(ctlr, offset, val);
-}
-static inline void edma_and(unsigned ctlr, int offset, unsigned and)
-{
-	unsigned val = edma_read(ctlr, offset);
-	val &= and;
-	edma_write(ctlr, offset, val);
-}
-static inline void edma_or(unsigned ctlr, int offset, unsigned or)
-{
-	unsigned val = edma_read(ctlr, offset);
-	val |= or;
-	edma_write(ctlr, offset, val);
-}
-static inline unsigned int edma_read_array(unsigned ctlr, int offset, int i)
-{
-	return edma_read(ctlr, offset + (i << 2));
-}
-static inline void edma_write_array(unsigned ctlr, int offset, int i,
-		unsigned val)
-{
-	edma_write(ctlr, offset + (i << 2), val);
-}
-static inline void edma_modify_array(unsigned ctlr, int offset, int i,
-		unsigned and, unsigned or)
-{
-	edma_modify(ctlr, offset + (i << 2), and, or);
-}
-static inline void edma_or_array(unsigned ctlr, int offset, int i, unsigned or)
-{
-	edma_or(ctlr, offset + (i << 2), or);
-}
-static inline void edma_or_array2(unsigned ctlr, int offset, int i, int j,
-		unsigned or)
-{
-	edma_or(ctlr, offset + ((i*2 + j) << 2), or);
-}
-static inline void edma_write_array2(unsigned ctlr, int offset, int i, int j,
-		unsigned val)
-{
-	edma_write(ctlr, offset + ((i*2 + j) << 2), val);
-}
-static inline unsigned int edma_shadow0_read(unsigned ctlr, int offset)
-{
-	return edma_read(ctlr, EDMA_SHADOW0 + offset);
-}
-static inline unsigned int edma_shadow0_read_array(unsigned ctlr, int offset,
-		int i)
-{
-	return edma_read(ctlr, EDMA_SHADOW0 + offset + (i << 2));
-}
-static inline void edma_shadow0_write(unsigned ctlr, int offset, unsigned val)
-{
-	edma_write(ctlr, EDMA_SHADOW0 + offset, val);
-}
-static inline void edma_shadow0_write_array(unsigned ctlr, int offset, int i,
-		unsigned val)
-{
-	edma_write(ctlr, EDMA_SHADOW0 + offset + (i << 2), val);
-}
-static inline unsigned int edma_parm_read(unsigned ctlr, int offset,
-		int param_no)
-{
-	return edma_read(ctlr, EDMA_PARM + offset + (param_no << 5));
-}
-static inline void edma_parm_write(unsigned ctlr, int offset, int param_no,
-		unsigned val)
-{
-	edma_write(ctlr, EDMA_PARM + offset + (param_no << 5), val);
-}
-static inline void edma_parm_modify(unsigned ctlr, int offset, int param_no,
-		unsigned and, unsigned or)
-{
-	edma_modify(ctlr, EDMA_PARM + offset + (param_no << 5), and, or);
-}
-static inline void edma_parm_and(unsigned ctlr, int offset, int param_no,
-		unsigned and)
-{
-	edma_and(ctlr, EDMA_PARM + offset + (param_no << 5), and);
-}
-static inline void edma_parm_or(unsigned ctlr, int offset, int param_no,
-		unsigned or)
-{
-	edma_or(ctlr, EDMA_PARM + offset + (param_no << 5), or);
-}
-
-static inline void set_bits(int offset, int len, unsigned long *p)
-{
-	for (; len > 0; len--)
-		set_bit(offset + (len - 1), p);
-}
-
-static inline void clear_bits(int offset, int len, unsigned long *p)
-{
-	for (; len > 0; len--)
-		clear_bit(offset + (len - 1), p);
-}
-
-/*****************************************************************************/
-
-/* actual number of DMA channels and slots on this silicon */
-struct edma {
-	/* how many dma resources of each type */
-	unsigned	num_channels;
-	unsigned	num_region;
-	unsigned	num_slots;
-	unsigned	num_tc;
-	unsigned	num_cc;
-	enum dma_event_q 	default_queue;
-
-	/* list of channels with no even trigger; terminated by "-1" */
-	const s8	*noevent;
-
-	/* The edma_inuse bit for each PaRAM slot is clear unless the
-	 * channel is in use ... by ARM or DSP, for QDMA, or whatever.
-	 */
-	DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
-
-	/* The edma_unused bit for each channel is clear unless
-	 * it is not being used on this platform. It uses a bit
-	 * of SOC-specific initialization code.
-	 */
-	DECLARE_BITMAP(edma_unused, EDMA_MAX_DMACH);
-
-	unsigned	irq_res_start;
-	unsigned	irq_res_end;
-
-	struct dma_interrupt_data {
-		void (*callback)(unsigned channel, unsigned short ch_status,
-				void *data);
-		void *data;
-	} intr_data[EDMA_MAX_DMACH];
-};
-
-static struct edma *edma_cc[EDMA_MAX_CC];
-static int arch_num_cc;
-
-/* dummy param set used to (re)initialize parameter RAM slots */
-static const struct edmacc_param dummy_paramset = {
-	.link_bcntrld = 0xffff,
-	.ccnt = 1,
-};
-
-/*****************************************************************************/
-
-static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
-		enum dma_event_q queue_no)
-{
-	int bit = (ch_no & 0x7) * 4;
-
-	/* default to low priority queue */
-	if (queue_no == EVENTQ_DEFAULT)
-		queue_no = edma_cc[ctlr]->default_queue;
-
-	queue_no &= 7;
-	edma_modify_array(ctlr, EDMA_DMAQNUM, (ch_no >> 3),
-			~(0x7 << bit), queue_no << bit);
-}
-
-static void __init map_queue_tc(unsigned ctlr, int queue_no, int tc_no)
-{
-	int bit = queue_no * 4;
-	edma_modify(ctlr, EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
-}
-
-static void __init assign_priority_to_queue(unsigned ctlr, int queue_no,
-		int priority)
-{
-	int bit = queue_no * 4;
-	edma_modify(ctlr, EDMA_QUEPRI, ~(0x7 << bit),
-			((priority & 0x7) << bit));
-}
-
-/**
- * map_dmach_param - Maps channel number to param entry number
- *
- * This maps the dma channel number to param entry numberter. In
- * other words using the DMA channel mapping registers a param entry
- * can be mapped to any channel
- *
- * Callers are responsible for ensuring the channel mapping logic is
- * included in that particular EDMA variant (Eg : dm646x)
- *
- */
-static void __init map_dmach_param(unsigned ctlr)
-{
-	int i;
-	for (i = 0; i < EDMA_MAX_DMACH; i++)
-		edma_write_array(ctlr, EDMA_DCHMAP , i , (i << 5));
-}
-
-static inline void
-setup_dma_interrupt(unsigned lch,
-	void (*callback)(unsigned channel, u16 ch_status, void *data),
-	void *data)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(lch);
-	lch = EDMA_CHAN_SLOT(lch);
-
-	if (!callback)
-		edma_shadow0_write_array(ctlr, SH_IECR, lch >> 5,
-				BIT(lch & 0x1f));
-
-	edma_cc[ctlr]->intr_data[lch].callback = callback;
-	edma_cc[ctlr]->intr_data[lch].data = data;
-
-	if (callback) {
-		edma_shadow0_write_array(ctlr, SH_ICR, lch >> 5,
-				BIT(lch & 0x1f));
-		edma_shadow0_write_array(ctlr, SH_IESR, lch >> 5,
-				BIT(lch & 0x1f));
-	}
-}
-
-static int irq2ctlr(int irq)
-{
-	if (irq >= edma_cc[0]->irq_res_start && irq <= edma_cc[0]->irq_res_end)
-		return 0;
-	else if (irq >= edma_cc[1]->irq_res_start &&
-		irq <= edma_cc[1]->irq_res_end)
-		return 1;
-
-	return -1;
-}
-
-/******************************************************************************
- *
- * DMA interrupt handler
- *
- *****************************************************************************/
-static irqreturn_t dma_irq_handler(int irq, void *data)
-{
-	int ctlr;
-	u32 sh_ier;
-	u32 sh_ipr;
-	u32 bank;
-
-	ctlr = irq2ctlr(irq);
-	if (ctlr < 0)
-		return IRQ_NONE;
-
-	dev_dbg(data, "dma_irq_handler\n");
-
-	sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 0);
-	if (!sh_ipr) {
-		sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 1);
-		if (!sh_ipr)
-			return IRQ_NONE;
-		sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 1);
-		bank = 1;
-	} else {
-		sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 0);
-		bank = 0;
-	}
-
-	do {
-		u32 slot;
-		u32 channel;
-
-		dev_dbg(data, "IPR%d %08x\n", bank, sh_ipr);
-
-		slot = __ffs(sh_ipr);
-		sh_ipr &= ~(BIT(slot));
-
-		if (sh_ier & BIT(slot)) {
-			channel = (bank << 5) | slot;
-			/* Clear the corresponding IPR bits */
-			edma_shadow0_write_array(ctlr, SH_ICR, bank,
-					BIT(slot));
-			if (edma_cc[ctlr]->intr_data[channel].callback)
-				edma_cc[ctlr]->intr_data[channel].callback(
-					channel, DMA_COMPLETE,
-					edma_cc[ctlr]->intr_data[channel].data);
-		}
-	} while (sh_ipr);
-
-	edma_shadow0_write(ctlr, SH_IEVAL, 1);
-	return IRQ_HANDLED;
-}
-
-/******************************************************************************
- *
- * DMA error interrupt handler
- *
- *****************************************************************************/
-static irqreturn_t dma_ccerr_handler(int irq, void *data)
-{
-	int i;
-	int ctlr;
-	unsigned int cnt = 0;
-
-	ctlr = irq2ctlr(irq);
-	if (ctlr < 0)
-		return IRQ_NONE;
-
-	dev_dbg(data, "dma_ccerr_handler\n");
-
-	if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) &&
-	    (edma_read_array(ctlr, EDMA_EMR, 1) == 0) &&
-	    (edma_read(ctlr, EDMA_QEMR) == 0) &&
-	    (edma_read(ctlr, EDMA_CCERR) == 0))
-		return IRQ_NONE;
-
-	while (1) {
-		int j = -1;
-		if (edma_read_array(ctlr, EDMA_EMR, 0))
-			j = 0;
-		else if (edma_read_array(ctlr, EDMA_EMR, 1))
-			j = 1;
-		if (j >= 0) {
-			dev_dbg(data, "EMR%d %08x\n", j,
-					edma_read_array(ctlr, EDMA_EMR, j));
-			for (i = 0; i < 32; i++) {
-				int k = (j << 5) + i;
-				if (edma_read_array(ctlr, EDMA_EMR, j) &
-							BIT(i)) {
-					/* Clear the corresponding EMR bits */
-					edma_write_array(ctlr, EDMA_EMCR, j,
-							BIT(i));
-					/* Clear any SER */
-					edma_shadow0_write_array(ctlr, SH_SECR,
-								j, BIT(i));
-					if (edma_cc[ctlr]->intr_data[k].
-								callback) {
-						edma_cc[ctlr]->intr_data[k].
-						callback(k,
-						DMA_CC_ERROR,
-						edma_cc[ctlr]->intr_data
-						[k].data);
-					}
-				}
-			}
-		} else if (edma_read(ctlr, EDMA_QEMR)) {
-			dev_dbg(data, "QEMR %02x\n",
-				edma_read(ctlr, EDMA_QEMR));
-			for (i = 0; i < 8; i++) {
-				if (edma_read(ctlr, EDMA_QEMR) & BIT(i)) {
-					/* Clear the corresponding IPR bits */
-					edma_write(ctlr, EDMA_QEMCR, BIT(i));
-					edma_shadow0_write(ctlr, SH_QSECR,
-								BIT(i));
-
-					/* NOTE:  not reported!! */
-				}
-			}
-		} else if (edma_read(ctlr, EDMA_CCERR)) {
-			dev_dbg(data, "CCERR %08x\n",
-				edma_read(ctlr, EDMA_CCERR));
-			/* FIXME:  CCERR.BIT(16) ignored!  much better
-			 * to just write CCERRCLR with CCERR value...
-			 */
-			for (i = 0; i < 8; i++) {
-				if (edma_read(ctlr, EDMA_CCERR) & BIT(i)) {
-					/* Clear the corresponding IPR bits */
-					edma_write(ctlr, EDMA_CCERRCLR, BIT(i));
-
-					/* NOTE:  not reported!! */
-				}
-			}
-		}
-		if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) &&
-		    (edma_read_array(ctlr, EDMA_EMR, 1) == 0) &&
-		    (edma_read(ctlr, EDMA_QEMR) == 0) &&
-		    (edma_read(ctlr, EDMA_CCERR) == 0))
-			break;
-		cnt++;
-		if (cnt > 10)
-			break;
-	}
-	edma_write(ctlr, EDMA_EEVAL, 1);
-	return IRQ_HANDLED;
-}
-
-/******************************************************************************
- *
- * Transfer controller error interrupt handlers
- *
- *****************************************************************************/
-
-#define tc_errs_handled	false	/* disabled as long as they're NOPs */
-
-static irqreturn_t dma_tc0err_handler(int irq, void *data)
-{
-	dev_dbg(data, "dma_tc0err_handler\n");
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t dma_tc1err_handler(int irq, void *data)
-{
-	dev_dbg(data, "dma_tc1err_handler\n");
-	return IRQ_HANDLED;
-}
-
-static int reserve_contiguous_slots(int ctlr, unsigned int id,
-				     unsigned int num_slots,
-				     unsigned int start_slot)
-{
-	int i, j;
-	unsigned int count = num_slots;
-	int stop_slot = start_slot;
-	DECLARE_BITMAP(tmp_inuse, EDMA_MAX_PARAMENTRY);
-
-	for (i = start_slot; i < edma_cc[ctlr]->num_slots; ++i) {
-		j = EDMA_CHAN_SLOT(i);
-		if (!test_and_set_bit(j, edma_cc[ctlr]->edma_inuse)) {
-			/* Record our current beginning slot */
-			if (count == num_slots)
-				stop_slot = i;
-
-			count--;
-			set_bit(j, tmp_inuse);
-
-			if (count == 0)
-				break;
-		} else {
-			clear_bit(j, tmp_inuse);
-
-			if (id == EDMA_CONT_PARAMS_FIXED_EXACT) {
-				stop_slot = i;
-				break;
-			} else {
-				count = num_slots;
-			}
-		}
-	}
-
-	/*
-	 * We have to clear any bits that we set
-	 * if we run out parameter RAM slots, i.e we do find a set
-	 * of contiguous parameter RAM slots but do not find the exact number
-	 * requested as we may reach the total number of parameter RAM slots
-	 */
-	if (i == edma_cc[ctlr]->num_slots)
-		stop_slot = i;
-
-	j = start_slot;
-	for_each_set_bit_from(j, tmp_inuse, stop_slot)
-		clear_bit(j, edma_cc[ctlr]->edma_inuse);
-
-	if (count)
-		return -EBUSY;
-
-	for (j = i - num_slots + 1; j <= i; ++j)
-		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j),
-			&dummy_paramset, PARM_SIZE);
-
-	return EDMA_CTLR_CHAN(ctlr, i - num_slots + 1);
-}
-
-static int prepare_unused_channel_list(struct device *dev, void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int i, ctlr;
-
-	for (i = 0; i < pdev->num_resources; i++) {
-		if ((pdev->resource[i].flags & IORESOURCE_DMA) &&
-				(int)pdev->resource[i].start >= 0) {
-			ctlr = EDMA_CTLR(pdev->resource[i].start);
-			clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start),
-					edma_cc[ctlr]->edma_unused);
-		}
-	}
-
-	return 0;
-}
-
-/*-----------------------------------------------------------------------*/
-
-static bool unused_chan_list_done;
-
-/* Resource alloc/free:  dma channels, parameter RAM slots */
-
-/**
- * edma_alloc_channel - allocate DMA channel and paired parameter RAM
- * @channel: specific channel to allocate; negative for "any unmapped channel"
- * @callback: optional; to be issued on DMA completion or errors
- * @data: passed to callback
- * @eventq_no: an EVENTQ_* constant, used to choose which Transfer
- *	Controller (TC) executes requests using this channel.  Use
- *	EVENTQ_DEFAULT unless you really need a high priority queue.
- *
- * This allocates a DMA channel and its associated parameter RAM slot.
- * The parameter RAM is initialized to hold a dummy transfer.
- *
- * Normal use is to pass a specific channel number as @channel, to make
- * use of hardware events mapped to that channel.  When the channel will
- * be used only for software triggering or event chaining, channels not
- * mapped to hardware events (or mapped to unused events) are preferable.
- *
- * DMA transfers start from a channel using edma_start(), or by
- * chaining.  When the transfer described in that channel's parameter RAM
- * slot completes, that slot's data may be reloaded through a link.
- *
- * DMA errors are only reported to the @callback associated with the
- * channel driving that transfer, but transfer completion callbacks can
- * be sent to another channel under control of the TCC field in
- * the option word of the transfer's parameter RAM set.  Drivers must not
- * use DMA transfer completion callbacks for channels they did not allocate.
- * (The same applies to TCC codes used in transfer chaining.)
- *
- * Returns the number of the channel, else negative errno.
- */
-int edma_alloc_channel(int channel,
-		void (*callback)(unsigned channel, u16 ch_status, void *data),
-		void *data,
-		enum dma_event_q eventq_no)
-{
-	unsigned i, done = 0, ctlr = 0;
-	int ret = 0;
-
-	if (!unused_chan_list_done) {
-		/*
-		 * Scan all the platform devices to find out the EDMA channels
-		 * used and clear them in the unused list, making the rest
-		 * available for ARM usage.
-		 */
-		ret = bus_for_each_dev(&platform_bus_type, NULL, NULL,
-				prepare_unused_channel_list);
-		if (ret < 0)
-			return ret;
-
-		unused_chan_list_done = true;
-	}
-
-	if (channel >= 0) {
-		ctlr = EDMA_CTLR(channel);
-		channel = EDMA_CHAN_SLOT(channel);
-	}
-
-	if (channel < 0) {
-		for (i = 0; i < arch_num_cc; i++) {
-			channel = 0;
-			for (;;) {
-				channel = find_next_bit(edma_cc[i]->edma_unused,
-						edma_cc[i]->num_channels,
-						channel);
-				if (channel == edma_cc[i]->num_channels)
-					break;
-				if (!test_and_set_bit(channel,
-						edma_cc[i]->edma_inuse)) {
-					done = 1;
-					ctlr = i;
-					break;
-				}
-				channel++;
-			}
-			if (done)
-				break;
-		}
-		if (!done)
-			return -ENOMEM;
-	} else if (channel >= edma_cc[ctlr]->num_channels) {
-		return -EINVAL;
-	} else if (test_and_set_bit(channel, edma_cc[ctlr]->edma_inuse)) {
-		return -EBUSY;
-	}
-
-	/* ensure access through shadow region 0 */
-	edma_or_array2(ctlr, EDMA_DRAE, 0, channel >> 5, BIT(channel & 0x1f));
-
-	/* ensure no events are pending */
-	edma_stop(EDMA_CTLR_CHAN(ctlr, channel));
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
-			&dummy_paramset, PARM_SIZE);
-
-	if (callback)
-		setup_dma_interrupt(EDMA_CTLR_CHAN(ctlr, channel),
-					callback, data);
-
-	map_dmach_queue(ctlr, channel, eventq_no);
-
-	return EDMA_CTLR_CHAN(ctlr, channel);
-}
-EXPORT_SYMBOL(edma_alloc_channel);
-
-
-/**
- * edma_free_channel - deallocate DMA channel
- * @channel: dma channel returned from edma_alloc_channel()
- *
- * This deallocates the DMA channel and associated parameter RAM slot
- * allocated by edma_alloc_channel().
- *
- * Callers are responsible for ensuring the channel is inactive, and
- * will not be reactivated by linking, chaining, or software calls to
- * edma_start().
- */
-void edma_free_channel(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel >= edma_cc[ctlr]->num_channels)
-		return;
-
-	setup_dma_interrupt(channel, NULL, NULL);
-	/* REVISIT should probably take out of shadow region 0 */
-
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
-			&dummy_paramset, PARM_SIZE);
-	clear_bit(channel, edma_cc[ctlr]->edma_inuse);
-}
-EXPORT_SYMBOL(edma_free_channel);
-
-/**
- * edma_alloc_slot - allocate DMA parameter RAM
- * @slot: specific slot to allocate; negative for "any unused slot"
- *
- * This allocates a parameter RAM slot, initializing it to hold a
- * dummy transfer.  Slots allocated using this routine have not been
- * mapped to a hardware DMA channel, and will normally be used by
- * linking to them from a slot associated with a DMA channel.
- *
- * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific
- * slots may be allocated on behalf of DSP firmware.
- *
- * Returns the number of the slot, else negative errno.
- */
-int edma_alloc_slot(unsigned ctlr, int slot)
-{
-	if (!edma_cc[ctlr])
-		return -EINVAL;
-
-	if (slot >= 0)
-		slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < 0) {
-		slot = edma_cc[ctlr]->num_channels;
-		for (;;) {
-			slot = find_next_zero_bit(edma_cc[ctlr]->edma_inuse,
-					edma_cc[ctlr]->num_slots, slot);
-			if (slot == edma_cc[ctlr]->num_slots)
-				return -ENOMEM;
-			if (!test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse))
-				break;
-		}
-	} else if (slot < edma_cc[ctlr]->num_channels ||
-			slot >= edma_cc[ctlr]->num_slots) {
-		return -EINVAL;
-	} else if (test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse)) {
-		return -EBUSY;
-	}
-
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
-			&dummy_paramset, PARM_SIZE);
-
-	return EDMA_CTLR_CHAN(ctlr, slot);
-}
-EXPORT_SYMBOL(edma_alloc_slot);
-
-/**
- * edma_free_slot - deallocate DMA parameter RAM
- * @slot: parameter RAM slot returned from edma_alloc_slot()
- *
- * This deallocates the parameter RAM slot allocated by edma_alloc_slot().
- * Callers are responsible for ensuring the slot is inactive, and will
- * not be activated.
- */
-void edma_free_slot(unsigned slot)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_channels ||
-		slot >= edma_cc[ctlr]->num_slots)
-		return;
-
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
-			&dummy_paramset, PARM_SIZE);
-	clear_bit(slot, edma_cc[ctlr]->edma_inuse);
-}
-EXPORT_SYMBOL(edma_free_slot);
-
-
-/**
- * edma_alloc_cont_slots- alloc contiguous parameter RAM slots
- * The API will return the starting point of a set of
- * contiguous parameter RAM slots that have been requested
- *
- * @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT
- * or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
- * @count: number of contiguous Paramter RAM slots
- * @slot  - the start value of Parameter RAM slot that should be passed if id
- * is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
- *
- * If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of
- * contiguous Parameter RAM slots from parameter RAM 64 in the case of
- * DaVinci SOCs and 32 in the case of DA8xx SOCs.
- *
- * If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a
- * set of contiguous parameter RAM slots from the "slot" that is passed as an
- * argument to the API.
- *
- * If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries
- * starts looking for a set of contiguous parameter RAMs from the "slot"
- * that is passed as an argument to the API. On failure the API will try to
- * find a set of contiguous Parameter RAM slots from the remaining Parameter
- * RAM slots
- */
-int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
-{
-	/*
-	 * The start slot requested should be greater than
-	 * the number of channels and lesser than the total number
-	 * of slots
-	 */
-	if ((id != EDMA_CONT_PARAMS_ANY) &&
-		(slot < edma_cc[ctlr]->num_channels ||
-		slot >= edma_cc[ctlr]->num_slots))
-		return -EINVAL;
-
-	/*
-	 * The number of parameter RAM slots requested cannot be less than 1
-	 * and cannot be more than the number of slots minus the number of
-	 * channels
-	 */
-	if (count < 1 || count >
-		(edma_cc[ctlr]->num_slots - edma_cc[ctlr]->num_channels))
-		return -EINVAL;
-
-	switch (id) {
-	case EDMA_CONT_PARAMS_ANY:
-		return reserve_contiguous_slots(ctlr, id, count,
-						 edma_cc[ctlr]->num_channels);
-	case EDMA_CONT_PARAMS_FIXED_EXACT:
-	case EDMA_CONT_PARAMS_FIXED_NOT_EXACT:
-		return reserve_contiguous_slots(ctlr, id, count, slot);
-	default:
-		return -EINVAL;
-	}
-
-}
-EXPORT_SYMBOL(edma_alloc_cont_slots);
-
-/**
- * edma_free_cont_slots - deallocate DMA parameter RAM slots
- * @slot: first parameter RAM of a set of parameter RAM slots to be freed
- * @count: the number of contiguous parameter RAM slots to be freed
- *
- * This deallocates the parameter RAM slots allocated by
- * edma_alloc_cont_slots.
- * Callers/applications need to keep track of sets of contiguous
- * parameter RAM slots that have been allocated using the edma_alloc_cont_slots
- * API.
- * Callers are responsible for ensuring the slots are inactive, and will
- * not be activated.
- */
-int edma_free_cont_slots(unsigned slot, int count)
-{
-	unsigned ctlr, slot_to_free;
-	int i;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_channels ||
-		slot >= edma_cc[ctlr]->num_slots ||
-		count < 1)
-		return -EINVAL;
-
-	for (i = slot; i < slot + count; ++i) {
-		ctlr = EDMA_CTLR(i);
-		slot_to_free = EDMA_CHAN_SLOT(i);
-
-		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot_to_free),
-			&dummy_paramset, PARM_SIZE);
-		clear_bit(slot_to_free, edma_cc[ctlr]->edma_inuse);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(edma_free_cont_slots);
-
-/*-----------------------------------------------------------------------*/
-
-/* Parameter RAM operations (i) -- read/write partial slots */
-
-/**
- * edma_set_src - set initial DMA source address in parameter RAM slot
- * @slot: parameter RAM slot being configured
- * @src_port: physical address of source (memory, controller FIFO, etc)
- * @addressMode: INCR, except in very rare cases
- * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
- *	width to use when addressing the fifo (e.g. W8BIT, W32BIT)
- *
- * Note that the source address is modified during the DMA transfer
- * according to edma_set_src_index().
- */
-void edma_set_src(unsigned slot, dma_addr_t src_port,
-				enum address_mode mode, enum fifo_width width)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
-
-		if (mode) {
-			/* set SAM and program FWID */
-			i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8));
-		} else {
-			/* clear SAM */
-			i &= ~SAM;
-		}
-		edma_parm_write(ctlr, PARM_OPT, slot, i);
-
-		/* set the source port address
-		   in source register of param structure */
-		edma_parm_write(ctlr, PARM_SRC, slot, src_port);
-	}
-}
-EXPORT_SYMBOL(edma_set_src);
-
-/**
- * edma_set_dest - set initial DMA destination address in parameter RAM slot
- * @slot: parameter RAM slot being configured
- * @dest_port: physical address of destination (memory, controller FIFO, etc)
- * @addressMode: INCR, except in very rare cases
- * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
- *	width to use when addressing the fifo (e.g. W8BIT, W32BIT)
- *
- * Note that the destination address is modified during the DMA transfer
- * according to edma_set_dest_index().
- */
-void edma_set_dest(unsigned slot, dma_addr_t dest_port,
-				 enum address_mode mode, enum fifo_width width)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
-
-		if (mode) {
-			/* set DAM and program FWID */
-			i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8));
-		} else {
-			/* clear DAM */
-			i &= ~DAM;
-		}
-		edma_parm_write(ctlr, PARM_OPT, slot, i);
-		/* set the destination port address
-		   in dest register of param structure */
-		edma_parm_write(ctlr, PARM_DST, slot, dest_port);
-	}
-}
-EXPORT_SYMBOL(edma_set_dest);
-
-/**
- * edma_get_position - returns the current transfer points
- * @slot: parameter RAM slot being examined
- * @src: pointer to source port position
- * @dst: pointer to destination port position
- *
- * Returns current source and destination addresses for a particular
- * parameter RAM slot.  Its channel should not be active when this is called.
- */
-void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst)
-{
-	struct edmacc_param temp;
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	edma_read_slot(EDMA_CTLR_CHAN(ctlr, slot), &temp);
-	if (src != NULL)
-		*src = temp.src;
-	if (dst != NULL)
-		*dst = temp.dst;
-}
-EXPORT_SYMBOL(edma_get_position);
-
-/**
- * edma_set_src_index - configure DMA source address indexing
- * @slot: parameter RAM slot being configured
- * @src_bidx: byte offset between source arrays in a frame
- * @src_cidx: byte offset between source frames in a block
- *
- * Offsets are specified to support either contiguous or discontiguous
- * memory transfers, or repeated access to a hardware register, as needed.
- * When accessing hardware registers, both offsets are normally zero.
- */
-void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
-				0xffff0000, src_bidx);
-		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
-				0xffff0000, src_cidx);
-	}
-}
-EXPORT_SYMBOL(edma_set_src_index);
-
-/**
- * edma_set_dest_index - configure DMA destination address indexing
- * @slot: parameter RAM slot being configured
- * @dest_bidx: byte offset between destination arrays in a frame
- * @dest_cidx: byte offset between destination frames in a block
- *
- * Offsets are specified to support either contiguous or discontiguous
- * memory transfers, or repeated access to a hardware register, as needed.
- * When accessing hardware registers, both offsets are normally zero.
- */
-void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
-				0x0000ffff, dest_bidx << 16);
-		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
-				0x0000ffff, dest_cidx << 16);
-	}
-}
-EXPORT_SYMBOL(edma_set_dest_index);
-
-/**
- * edma_set_transfer_params - configure DMA transfer parameters
- * @slot: parameter RAM slot being configured
- * @acnt: how many bytes per array (at least one)
- * @bcnt: how many arrays per frame (at least one)
- * @ccnt: how many frames per block (at least one)
- * @bcnt_rld: used only for A-Synchronized transfers; this specifies
- *	the value to reload into bcnt when it decrements to zero
- * @sync_mode: ASYNC or ABSYNC
- *
- * See the EDMA3 documentation to understand how to configure and link
- * transfers using the fields in PaRAM slots.  If you are not doing it
- * all at once with edma_write_slot(), you will use this routine
- * plus two calls each for source and destination, setting the initial
- * address and saying how to index that address.
- *
- * An example of an A-Synchronized transfer is a serial link using a
- * single word shift register.  In that case, @acnt would be equal to
- * that word size; the serial controller issues a DMA synchronization
- * event to transfer each word, and memory access by the DMA transfer
- * controller will be word-at-a-time.
- *
- * An example of an AB-Synchronized transfer is a device using a FIFO.
- * In that case, @acnt equals the FIFO width and @bcnt equals its depth.
- * The controller with the FIFO issues DMA synchronization events when
- * the FIFO threshold is reached, and the DMA transfer controller will
- * transfer one frame to (or from) the FIFO.  It will probably use
- * efficient burst modes to access memory.
- */
-void edma_set_transfer_params(unsigned slot,
-		u16 acnt, u16 bcnt, u16 ccnt,
-		u16 bcnt_rld, enum sync_dimension sync_mode)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		edma_parm_modify(ctlr, PARM_LINK_BCNTRLD, slot,
-				0x0000ffff, bcnt_rld << 16);
-		if (sync_mode == ASYNC)
-			edma_parm_and(ctlr, PARM_OPT, slot, ~SYNCDIM);
-		else
-			edma_parm_or(ctlr, PARM_OPT, slot, SYNCDIM);
-		/* Set the acount, bcount, ccount registers */
-		edma_parm_write(ctlr, PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
-		edma_parm_write(ctlr, PARM_CCNT, slot, ccnt);
-	}
-}
-EXPORT_SYMBOL(edma_set_transfer_params);
-
-/**
- * edma_link - link one parameter RAM slot to another
- * @from: parameter RAM slot originating the link
- * @to: parameter RAM slot which is the link target
- *
- * The originating slot should not be part of any active DMA transfer.
- */
-void edma_link(unsigned from, unsigned to)
-{
-	unsigned ctlr_from, ctlr_to;
-
-	ctlr_from = EDMA_CTLR(from);
-	from = EDMA_CHAN_SLOT(from);
-	ctlr_to = EDMA_CTLR(to);
-	to = EDMA_CHAN_SLOT(to);
-
-	if (from >= edma_cc[ctlr_from]->num_slots)
-		return;
-	if (to >= edma_cc[ctlr_to]->num_slots)
-		return;
-	edma_parm_modify(ctlr_from, PARM_LINK_BCNTRLD, from, 0xffff0000,
-				PARM_OFFSET(to));
-}
-EXPORT_SYMBOL(edma_link);
-
-/**
- * edma_unlink - cut link from one parameter RAM slot
- * @from: parameter RAM slot originating the link
- *
- * The originating slot should not be part of any active DMA transfer.
- * Its link is set to 0xffff.
- */
-void edma_unlink(unsigned from)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(from);
-	from = EDMA_CHAN_SLOT(from);
-
-	if (from >= edma_cc[ctlr]->num_slots)
-		return;
-	edma_parm_or(ctlr, PARM_LINK_BCNTRLD, from, 0xffff);
-}
-EXPORT_SYMBOL(edma_unlink);
-
-/*-----------------------------------------------------------------------*/
-
-/* Parameter RAM operations (ii) -- read/write whole parameter sets */
-
-/**
- * edma_write_slot - write parameter RAM data for slot
- * @slot: number of parameter RAM slot being modified
- * @param: data to be written into parameter RAM slot
- *
- * Use this to assign all parameters of a transfer at once.  This
- * allows more efficient setup of transfers than issuing multiple
- * calls to set up those parameters in small pieces, and provides
- * complete control over all transfer options.
- */
-void edma_write_slot(unsigned slot, const struct edmacc_param *param)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot >= edma_cc[ctlr]->num_slots)
-		return;
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), param,
-			PARM_SIZE);
-}
-EXPORT_SYMBOL(edma_write_slot);
-
-/**
- * edma_read_slot - read parameter RAM data from slot
- * @slot: number of parameter RAM slot being copied
- * @param: where to store copy of parameter RAM data
- *
- * Use this to read data from a parameter RAM slot, perhaps to
- * save them as a template for later reuse.
- */
-void edma_read_slot(unsigned slot, struct edmacc_param *param)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot >= edma_cc[ctlr]->num_slots)
-		return;
-	memcpy_fromio(param, edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
-			PARM_SIZE);
-}
-EXPORT_SYMBOL(edma_read_slot);
-
-/*-----------------------------------------------------------------------*/
-
-/* Various EDMA channel control operations */
-
-/**
- * edma_pause - pause dma on a channel
- * @channel: on which edma_start() has been called
- *
- * This temporarily disables EDMA hardware events on the specified channel,
- * preventing them from triggering new transfers on its behalf
- */
-void edma_pause(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		unsigned int mask = BIT(channel & 0x1f);
-
-		edma_shadow0_write_array(ctlr, SH_EECR, channel >> 5, mask);
-	}
-}
-EXPORT_SYMBOL(edma_pause);
-
-/**
- * edma_resume - resumes dma on a paused channel
- * @channel: on which edma_pause() has been called
- *
- * This re-enables EDMA hardware events on the specified channel.
- */
-void edma_resume(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		unsigned int mask = BIT(channel & 0x1f);
-
-		edma_shadow0_write_array(ctlr, SH_EESR, channel >> 5, mask);
-	}
-}
-EXPORT_SYMBOL(edma_resume);
-
-/**
- * edma_start - start dma on a channel
- * @channel: channel being activated
- *
- * Channels with event associations will be triggered by their hardware
- * events, and channels without such associations will be triggered by
- * software.  (At this writing there is no interface for using software
- * triggers except with channels that don't support hardware triggers.)
- *
- * Returns zero on success, else negative errno.
- */
-int edma_start(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		int j = channel >> 5;
-		unsigned int mask = BIT(channel & 0x1f);
-
-		/* EDMA channels without event association */
-		if (test_bit(channel, edma_cc[ctlr]->edma_unused)) {
-			pr_debug("EDMA: ESR%d %08x\n", j,
-				edma_shadow0_read_array(ctlr, SH_ESR, j));
-			edma_shadow0_write_array(ctlr, SH_ESR, j, mask);
-			return 0;
-		}
-
-		/* EDMA channel with event association */
-		pr_debug("EDMA: ER%d %08x\n", j,
-			edma_shadow0_read_array(ctlr, SH_ER, j));
-		/* Clear any pending event or error */
-		edma_write_array(ctlr, EDMA_ECR, j, mask);
-		edma_write_array(ctlr, EDMA_EMCR, j, mask);
-		/* Clear any SER */
-		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
-		edma_shadow0_write_array(ctlr, SH_EESR, j, mask);
-		pr_debug("EDMA: EER%d %08x\n", j,
-			edma_shadow0_read_array(ctlr, SH_EER, j));
-		return 0;
-	}
-
-	return -EINVAL;
-}
-EXPORT_SYMBOL(edma_start);
-
-/**
- * edma_stop - stops dma on the channel passed
- * @channel: channel being deactivated
- *
- * When @lch is a channel, any active transfer is paused and
- * all pending hardware events are cleared.  The current transfer
- * may not be resumed, and the channel's Parameter RAM should be
- * reinitialized before being reused.
- */
-void edma_stop(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		int j = channel >> 5;
-		unsigned int mask = BIT(channel & 0x1f);
-
-		edma_shadow0_write_array(ctlr, SH_EECR, j, mask);
-		edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
-		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
-		edma_write_array(ctlr, EDMA_EMCR, j, mask);
-
-		pr_debug("EDMA: EER%d %08x\n", j,
-				edma_shadow0_read_array(ctlr, SH_EER, j));
-
-		/* REVISIT:  consider guarding against inappropriate event
-		 * chaining by overwriting with dummy_paramset.
-		 */
-	}
-}
-EXPORT_SYMBOL(edma_stop);
-
-/******************************************************************************
- *
- * It cleans ParamEntry qand bring back EDMA to initial state if media has
- * been removed before EDMA has finished.It is usedful for removable media.
- * Arguments:
- *      ch_no     - channel no
- *
- * Return: zero on success, or corresponding error no on failure
- *
- * FIXME this should not be needed ... edma_stop() should suffice.
- *
- *****************************************************************************/
-
-void edma_clean_channel(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		int j = (channel >> 5);
-		unsigned int mask = BIT(channel & 0x1f);
-
-		pr_debug("EDMA: EMR%d %08x\n", j,
-				edma_read_array(ctlr, EDMA_EMR, j));
-		edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
-		/* Clear the corresponding EMR bits */
-		edma_write_array(ctlr, EDMA_EMCR, j, mask);
-		/* Clear any SER */
-		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
-		edma_write(ctlr, EDMA_CCERRCLR, BIT(16) | BIT(1) | BIT(0));
-	}
-}
-EXPORT_SYMBOL(edma_clean_channel);
-
-/*
- * edma_clear_event - clear an outstanding event on the DMA channel
- * Arguments:
- *	channel - channel number
- */
-void edma_clear_event(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel >= edma_cc[ctlr]->num_channels)
-		return;
-	if (channel < 32)
-		edma_write(ctlr, EDMA_ECR, BIT(channel));
-	else
-		edma_write(ctlr, EDMA_ECRH, BIT(channel - 32));
-}
-EXPORT_SYMBOL(edma_clear_event);
-
-/*-----------------------------------------------------------------------*/
-
-static int __init edma_probe(struct platform_device *pdev)
-{
-	struct edma_soc_info	**info = pdev->dev.platform_data;
-	const s8		(*queue_priority_mapping)[2];
-	const s8		(*queue_tc_mapping)[2];
-	int			i, j, off, ln, found = 0;
-	int			status = -1;
-	const s16		(*rsv_chans)[2];
-	const s16		(*rsv_slots)[2];
-	int			irq[EDMA_MAX_CC] = {0, 0};
-	int			err_irq[EDMA_MAX_CC] = {0, 0};
-	struct resource		*r[EDMA_MAX_CC] = {NULL};
-	resource_size_t		len[EDMA_MAX_CC];
-	char			res_name[10];
-	char			irq_name[10];
-
-	if (!info)
-		return -ENODEV;
-
-	for (j = 0; j < EDMA_MAX_CC; j++) {
-		sprintf(res_name, "edma_cc%d", j);
-		r[j] = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-						res_name);
-		if (!r[j] || !info[j]) {
-			if (found)
-				break;
-			else
-				return -ENODEV;
-		} else {
-			found = 1;
-		}
-
-		len[j] = resource_size(r[j]);
-
-		r[j] = request_mem_region(r[j]->start, len[j],
-			dev_name(&pdev->dev));
-		if (!r[j]) {
-			status = -EBUSY;
-			goto fail1;
-		}
-
-		edmacc_regs_base[j] = ioremap(r[j]->start, len[j]);
-		if (!edmacc_regs_base[j]) {
-			status = -EBUSY;
-			goto fail1;
-		}
-
-		edma_cc[j] = kzalloc(sizeof(struct edma), GFP_KERNEL);
-		if (!edma_cc[j]) {
-			status = -ENOMEM;
-			goto fail1;
-		}
-
-		edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel,
-							EDMA_MAX_DMACH);
-		edma_cc[j]->num_slots = min_t(unsigned, info[j]->n_slot,
-							EDMA_MAX_PARAMENTRY);
-		edma_cc[j]->num_cc = min_t(unsigned, info[j]->n_cc,
-							EDMA_MAX_CC);
-
-		edma_cc[j]->default_queue = info[j]->default_queue;
-
-		dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
-			edmacc_regs_base[j]);
-
-		for (i = 0; i < edma_cc[j]->num_slots; i++)
-			memcpy_toio(edmacc_regs_base[j] + PARM_OFFSET(i),
-					&dummy_paramset, PARM_SIZE);
-
-		/* Mark all channels as unused */
-		memset(edma_cc[j]->edma_unused, 0xff,
-			sizeof(edma_cc[j]->edma_unused));
-
-		if (info[j]->rsv) {
-
-			/* Clear the reserved channels in unused list */
-			rsv_chans = info[j]->rsv->rsv_chans;
-			if (rsv_chans) {
-				for (i = 0; rsv_chans[i][0] != -1; i++) {
-					off = rsv_chans[i][0];
-					ln = rsv_chans[i][1];
-					clear_bits(off, ln,
-						edma_cc[j]->edma_unused);
-				}
-			}
-
-			/* Set the reserved slots in inuse list */
-			rsv_slots = info[j]->rsv->rsv_slots;
-			if (rsv_slots) {
-				for (i = 0; rsv_slots[i][0] != -1; i++) {
-					off = rsv_slots[i][0];
-					ln = rsv_slots[i][1];
-					set_bits(off, ln,
-						edma_cc[j]->edma_inuse);
-				}
-			}
-		}
-
-		sprintf(irq_name, "edma%d", j);
-		irq[j] = platform_get_irq_byname(pdev, irq_name);
-		edma_cc[j]->irq_res_start = irq[j];
-		status = request_irq(irq[j], dma_irq_handler, 0, "edma",
-					&pdev->dev);
-		if (status < 0) {
-			dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
-				irq[j], status);
-			goto fail;
-		}
-
-		sprintf(irq_name, "edma%d_err", j);
-		err_irq[j] = platform_get_irq_byname(pdev, irq_name);
-		edma_cc[j]->irq_res_end = err_irq[j];
-		status = request_irq(err_irq[j], dma_ccerr_handler, 0,
-					"edma_error", &pdev->dev);
-		if (status < 0) {
-			dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
-				err_irq[j], status);
-			goto fail;
-		}
-
-		for (i = 0; i < edma_cc[j]->num_channels; i++)
-			map_dmach_queue(j, i, info[j]->default_queue);
-
-		queue_tc_mapping = info[j]->queue_tc_mapping;
-		queue_priority_mapping = info[j]->queue_priority_mapping;
-
-		/* Event queue to TC mapping */
-		for (i = 0; queue_tc_mapping[i][0] != -1; i++)
-			map_queue_tc(j, queue_tc_mapping[i][0],
-					queue_tc_mapping[i][1]);
-
-		/* Event queue priority mapping */
-		for (i = 0; queue_priority_mapping[i][0] != -1; i++)
-			assign_priority_to_queue(j,
-						queue_priority_mapping[i][0],
-						queue_priority_mapping[i][1]);
-
-		/* Map the channel to param entry if channel mapping logic
-		 * exist
-		 */
-		if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
-			map_dmach_param(j);
-
-		for (i = 0; i < info[j]->n_region; i++) {
-			edma_write_array2(j, EDMA_DRAE, i, 0, 0x0);
-			edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
-			edma_write_array(j, EDMA_QRAE, i, 0x0);
-		}
-		arch_num_cc++;
-	}
-
-	if (tc_errs_handled) {
-		status = request_irq(IRQ_TCERRINT0, dma_tc0err_handler, 0,
-					"edma_tc0", &pdev->dev);
-		if (status < 0) {
-			dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
-				IRQ_TCERRINT0, status);
-			return status;
-		}
-		status = request_irq(IRQ_TCERRINT, dma_tc1err_handler, 0,
-					"edma_tc1", &pdev->dev);
-		if (status < 0) {
-			dev_dbg(&pdev->dev, "request_irq %d --> %d\n",
-				IRQ_TCERRINT, status);
-			return status;
-		}
-	}
-
-	return 0;
-
-fail:
-	for (i = 0; i < EDMA_MAX_CC; i++) {
-		if (err_irq[i])
-			free_irq(err_irq[i], &pdev->dev);
-		if (irq[i])
-			free_irq(irq[i], &pdev->dev);
-	}
-fail1:
-	for (i = 0; i < EDMA_MAX_CC; i++) {
-		if (r[i])
-			release_mem_region(r[i]->start, len[i]);
-		if (edmacc_regs_base[i])
-			iounmap(edmacc_regs_base[i]);
-		kfree(edma_cc[i]);
-	}
-	return status;
-}
-
-
-static struct platform_driver edma_driver = {
-	.driver.name	= "edma",
-};
-
-static int __init edma_init(void)
-{
-	return platform_driver_probe(&edma_driver, edma_probe);
-}
-arch_initcall(edma_init);
-
diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/include/mach/cp_intc.h
index d13d8dfa2b0d..827bbe9baed4 100644
--- a/arch/arm/mach-davinci/include/mach/cp_intc.h
+++ b/arch/arm/mach-davinci/include/mach/cp_intc.h
@@ -51,7 +51,7 @@
 #define CP_INTC_HOST_PRIO_VECTOR(n)	(0x1600 + (n << 2))
 #define CP_INTC_VECTOR_ADDR(n)		(0x2000 + (n << 2))
 
-void __init cp_intc_init(void);
-int __init cp_intc_of_init(struct device_node *, struct device_node *);
+void cp_intc_init(void);
+int cp_intc_of_init(struct device_node *, struct device_node *);
 
 #endif	/* __ASM_HARDWARE_CP_INTC_H */
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 2e1c9eae0a58..3c797e2272f8 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -20,8 +20,8 @@
 #include <linux/videodev2.h>
 
 #include <mach/serial.h>
-#include <mach/edma.h>
 #include <mach/pm.h>
+#include <linux/platform_data/edma.h>
 #include <linux/platform_data/i2c-davinci.h>
 #include <linux/platform_data/mmc-davinci.h>
 #include <linux/platform_data/usb-davinci.h>
@@ -79,8 +79,8 @@ extern unsigned int da850_max_speed;
 #define DA8XX_SHARED_RAM_BASE	0x80000000
 #define DA8XX_ARM_RAM_BASE	0xffff0000
 
-void __init da830_init(void);
-void __init da850_init(void);
+void da830_init(void);
+void da850_init(void);
 
 int da830_register_edma(struct edma_rsv_info *rsv);
 int da850_register_edma(struct edma_rsv_info *rsv[2]);
@@ -94,17 +94,17 @@ int da8xx_register_uio_pruss(void);
 int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata);
 int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
 int da850_register_mmcsd1(struct davinci_mmc_config *config);
-void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata);
+void da8xx_register_mcasp(int id, struct snd_platform_data *pdata);
 int da8xx_register_rtc(void);
 int da850_register_cpufreq(char *async_clk);
 int da8xx_register_cpuidle(void);
-void __iomem * __init da8xx_get_mem_ctlr(void);
+void __iomem *da8xx_get_mem_ctlr(void);
 int da850_register_pm(struct platform_device *pdev);
-int __init da850_register_sata(unsigned long refclkpn);
-int __init da850_register_vpif(void);
-int __init da850_register_vpif_display
+int da850_register_sata(unsigned long refclkpn);
+int da850_register_vpif(void);
+int da850_register_vpif_display
 			(struct vpif_display_config *display_config);
-int __init da850_register_vpif_capture
+int da850_register_vpif_capture
 			(struct vpif_capture_config *capture_config);
 void da8xx_restart(char mode, const char *cmd);
 void da8xx_rproc_reserve_cma(void);
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
deleted file mode 100644
index 7e84c906ceff..000000000000
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- *  TI DAVINCI dma definitions
- *
- *  Copyright (C) 2006-2009 Texas Instruments.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * This EDMA3 programming framework exposes two basic kinds of resource:
- *
- *  Channel	Triggers transfers, usually from a hardware event but
- *		also manually or by "chaining" from DMA completions.
- *		Each channel is coupled to a Parameter RAM (PaRAM) slot.
- *
- *  Slot	Each PaRAM slot holds a DMA transfer descriptor (PaRAM
- *		"set"), source and destination addresses, a link to a
- *		next PaRAM slot (if any), options for the transfer, and
- *		instructions for updating those addresses.  There are
- *		more than twice as many slots as event channels.
- *
- * Each PaRAM set describes a sequence of transfers, either for one large
- * buffer or for several discontiguous smaller buffers.  An EDMA transfer
- * is driven only from a channel, which performs the transfers specified
- * in its PaRAM slot until there are no more transfers.  When that last
- * transfer completes, the "link" field may be used to reload the channel's
- * PaRAM slot with a new transfer descriptor.
- *
- * The EDMA Channel Controller (CC) maps requests from channels into physical
- * Transfer Controller (TC) requests when the channel triggers (by hardware
- * or software events, or by chaining).  The two physical DMA channels provided
- * by the TCs are thus shared by many logical channels.
- *
- * DaVinci hardware also has a "QDMA" mechanism which is not currently
- * supported through this interface.  (DSP firmware uses it though.)
- */
-
-#ifndef EDMA_H_
-#define EDMA_H_
-
-/* PaRAM slots are laid out like this */
-struct edmacc_param {
-	unsigned int opt;
-	unsigned int src;
-	unsigned int a_b_cnt;
-	unsigned int dst;
-	unsigned int src_dst_bidx;
-	unsigned int link_bcntrld;
-	unsigned int src_dst_cidx;
-	unsigned int ccnt;
-};
-
-#define CCINT0_INTERRUPT     16
-#define CCERRINT_INTERRUPT   17
-#define TCERRINT0_INTERRUPT   18
-#define TCERRINT1_INTERRUPT   19
-
-/* fields in edmacc_param.opt */
-#define SAM		BIT(0)
-#define DAM		BIT(1)
-#define SYNCDIM		BIT(2)
-#define STATIC		BIT(3)
-#define EDMA_FWID	(0x07 << 8)
-#define TCCMODE		BIT(11)
-#define EDMA_TCC(t)	((t) << 12)
-#define TCINTEN		BIT(20)
-#define ITCINTEN	BIT(21)
-#define TCCHEN		BIT(22)
-#define ITCCHEN		BIT(23)
-
-#define TRWORD (0x7<<2)
-#define PAENTRY (0x1ff<<5)
-
-/* Drivers should avoid using these symbolic names for dm644x
- * channels, and use platform_device IORESOURCE_DMA resources
- * instead.  (Other DaVinci chips have different peripherals
- * and thus have different DMA channel mappings.)
- */
-#define DAVINCI_DMA_MCBSP_TX              2
-#define DAVINCI_DMA_MCBSP_RX              3
-#define DAVINCI_DMA_VPSS_HIST             4
-#define DAVINCI_DMA_VPSS_H3A              5
-#define DAVINCI_DMA_VPSS_PRVU             6
-#define DAVINCI_DMA_VPSS_RSZ              7
-#define DAVINCI_DMA_IMCOP_IMXINT          8
-#define DAVINCI_DMA_IMCOP_VLCDINT         9
-#define DAVINCI_DMA_IMCO_PASQINT         10
-#define DAVINCI_DMA_IMCOP_DSQINT         11
-#define DAVINCI_DMA_SPI_SPIX             16
-#define DAVINCI_DMA_SPI_SPIR             17
-#define DAVINCI_DMA_UART0_URXEVT0        18
-#define DAVINCI_DMA_UART0_UTXEVT0        19
-#define DAVINCI_DMA_UART1_URXEVT1        20
-#define DAVINCI_DMA_UART1_UTXEVT1        21
-#define DAVINCI_DMA_UART2_URXEVT2        22
-#define DAVINCI_DMA_UART2_UTXEVT2        23
-#define DAVINCI_DMA_MEMSTK_MSEVT         24
-#define DAVINCI_DMA_MMCRXEVT             26
-#define DAVINCI_DMA_MMCTXEVT             27
-#define DAVINCI_DMA_I2C_ICREVT           28
-#define DAVINCI_DMA_I2C_ICXEVT           29
-#define DAVINCI_DMA_GPIO_GPINT0          32
-#define DAVINCI_DMA_GPIO_GPINT1          33
-#define DAVINCI_DMA_GPIO_GPINT2          34
-#define DAVINCI_DMA_GPIO_GPINT3          35
-#define DAVINCI_DMA_GPIO_GPINT4          36
-#define DAVINCI_DMA_GPIO_GPINT5          37
-#define DAVINCI_DMA_GPIO_GPINT6          38
-#define DAVINCI_DMA_GPIO_GPINT7          39
-#define DAVINCI_DMA_GPIO_GPBNKINT0       40
-#define DAVINCI_DMA_GPIO_GPBNKINT1       41
-#define DAVINCI_DMA_GPIO_GPBNKINT2       42
-#define DAVINCI_DMA_GPIO_GPBNKINT3       43
-#define DAVINCI_DMA_GPIO_GPBNKINT4       44
-#define DAVINCI_DMA_TIMER0_TINT0         48
-#define DAVINCI_DMA_TIMER1_TINT1         49
-#define DAVINCI_DMA_TIMER2_TINT2         50
-#define DAVINCI_DMA_TIMER3_TINT3         51
-#define DAVINCI_DMA_PWM0                 52
-#define DAVINCI_DMA_PWM1                 53
-#define DAVINCI_DMA_PWM2                 54
-
-/* DA830 specific EDMA3 information */
-#define EDMA_DA830_NUM_DMACH		32
-#define EDMA_DA830_NUM_TCC		32
-#define EDMA_DA830_NUM_PARAMENTRY	128
-#define EDMA_DA830_NUM_EVQUE		2
-#define EDMA_DA830_NUM_TC		2
-#define EDMA_DA830_CHMAP_EXIST		0
-#define EDMA_DA830_NUM_REGIONS		4
-#define DA830_DMACH2EVENT_MAP0		0x000FC03Fu
-#define DA830_DMACH2EVENT_MAP1		0x00000000u
-#define DA830_EDMA_ARM_OWN		0x30FFCCFFu
-
-/*ch_status paramater of callback function possible values*/
-#define DMA_COMPLETE 1
-#define DMA_CC_ERROR 2
-#define DMA_TC1_ERROR 3
-#define DMA_TC2_ERROR 4
-
-enum address_mode {
-	INCR = 0,
-	FIFO = 1
-};
-
-enum fifo_width {
-	W8BIT = 0,
-	W16BIT = 1,
-	W32BIT = 2,
-	W64BIT = 3,
-	W128BIT = 4,
-	W256BIT = 5
-};
-
-enum dma_event_q {
-	EVENTQ_0 = 0,
-	EVENTQ_1 = 1,
-	EVENTQ_2 = 2,
-	EVENTQ_3 = 3,
-	EVENTQ_DEFAULT = -1
-};
-
-enum sync_dimension {
-	ASYNC = 0,
-	ABSYNC = 1
-};
-
-#define EDMA_CTLR_CHAN(ctlr, chan)	(((ctlr) << 16) | (chan))
-#define EDMA_CTLR(i)			((i) >> 16)
-#define EDMA_CHAN_SLOT(i)		((i) & 0xffff)
-
-#define EDMA_CHANNEL_ANY		-1	/* for edma_alloc_channel() */
-#define EDMA_SLOT_ANY			-1	/* for edma_alloc_slot() */
-#define EDMA_CONT_PARAMS_ANY		 1001
-#define EDMA_CONT_PARAMS_FIXED_EXACT	 1002
-#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003
-
-#define EDMA_MAX_CC               2
-
-/* alloc/free DMA channels and their dedicated parameter RAM slots */
-int edma_alloc_channel(int channel,
-	void (*callback)(unsigned channel, u16 ch_status, void *data),
-	void *data, enum dma_event_q);
-void edma_free_channel(unsigned channel);
-
-/* alloc/free parameter RAM slots */
-int edma_alloc_slot(unsigned ctlr, int slot);
-void edma_free_slot(unsigned slot);
-
-/* alloc/free a set of contiguous parameter RAM slots */
-int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count);
-int edma_free_cont_slots(unsigned slot, int count);
-
-/* calls that operate on part of a parameter RAM slot */
-void edma_set_src(unsigned slot, dma_addr_t src_port,
-				enum address_mode mode, enum fifo_width);
-void edma_set_dest(unsigned slot, dma_addr_t dest_port,
-				 enum address_mode mode, enum fifo_width);
-void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst);
-void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
-void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
-void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
-		u16 bcnt_rld, enum sync_dimension sync_mode);
-void edma_link(unsigned from, unsigned to);
-void edma_unlink(unsigned from);
-
-/* calls that operate on an entire parameter RAM slot */
-void edma_write_slot(unsigned slot, const struct edmacc_param *params);
-void edma_read_slot(unsigned slot, struct edmacc_param *params);
-
-/* channel control operations */
-int edma_start(unsigned channel);
-void edma_stop(unsigned channel);
-void edma_clean_channel(unsigned channel);
-void edma_clear_event(unsigned channel);
-void edma_pause(unsigned channel);
-void edma_resume(unsigned channel);
-
-struct edma_rsv_info {
-
-	const s16	(*rsv_chans)[2];
-	const s16	(*rsv_slots)[2];
-};
-
-/* platform_data for EDMA driver */
-struct edma_soc_info {
-
-	/* how many dma resources of each type */
-	unsigned	n_channel;
-	unsigned	n_region;
-	unsigned	n_slot;
-	unsigned	n_tc;
-	unsigned	n_cc;
-	/*
-	 * Default queue is expected to be a low-priority queue.
-	 * This way, long transfers on the default queue started
-	 * by the codec engine will not cause audio defects.
-	 */
-	enum dma_event_q	default_queue;
-
-	/* Resource reservation for other cores */
-	struct edma_rsv_info	*rsv;
-
-	const s8	(*queue_tc_mapping)[2];
-	const s8	(*queue_priority_mapping)[2];
-};
-
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h
index 1656a02e3eda..366e975effa8 100644
--- a/arch/arm/mach-davinci/include/mach/tnetv107x.h
+++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h
@@ -51,9 +51,9 @@ struct tnetv107x_device_info {
 extern struct platform_device tnetv107x_wdt_device;
 extern struct platform_device tnetv107x_serial_device;
 
-extern void __init tnetv107x_init(void);
-extern void __init tnetv107x_devices_init(struct tnetv107x_device_info *);
-extern void __init tnetv107x_irq_init(void);
+extern void tnetv107x_init(void);
+extern void tnetv107x_devices_init(struct tnetv107x_device_info *);
+extern void tnetv107x_irq_init(void);
 void tnetv107x_restart(char mode, const char *cmd);
 
 #endif