Merge tag 'imx-dt-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt

From Shawn Guo <shawn.guo@linaro.org>:
It's based on imx/multiplatform branch.  Most of them are dts changes.
There are also a few imx6 improvement patches in there.

* tag 'imx-dt-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: imx6q: select ARM and PL310 errata
  ARM: imx6q: print silicon version on boot
  ARM i.MX dts: Consistently add labels to devicenodes
  ARM: dts: imx6q-sabresd: add volume up/down gpio keys
  ARM: dts: imx53: pinctl update
  ARM: imx: enable cpufreq for imx6q
  ARM: dts: imx6q: enable snvs lp rtc
  ARM: dts: imx6q-sabreauto: Add basic support
  ARM: imx6q: let users input debug uart port number
  ARM: dts: imx53-qsb: Make DA9053 regulator functional
  ARM: dts: imx53-qsb: Use pinctrl for gpio-led
  ARM i.MX dtsi: Add default bus-width property for esdhc controller

Signed-off-by: Arnd Bregmann <arnd@arndb.de>

5 files changed, 65 insertions, 14 deletions

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index ff702c3f35b7..b09924112f99 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -836,7 +836,14 @@ config	SOC_IMX53
 
 config SOC_IMX6Q
 	bool "i.MX6 Quad support"
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
+	select ARM_ERRATA_743622
+	select ARM_ERRATA_751472
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_764369 if SMP
+	select ARM_ERRATA_775420
 	select ARM_GIC
 	select COMMON_CLK
 	select CPU_V7
@@ -848,6 +855,10 @@ config SOC_IMX6Q
 	select MFD_SYSCON
 	select PINCTRL
 	select PINCTRL_IMX6Q
+	select PL310_ERRATA_588369 if CACHE_PL310
+	select PL310_ERRATA_727915 if CACHE_PL310
+	select PL310_ERRATA_769419 if CACHE_PL310
+	select PM_OPP if PM
 
 	help
 	  This enables support for Freescale i.MX6 Quad processor.
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index e5a82bb95b52..5f9f5919dd74 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -406,6 +406,7 @@ int __init mx6q_clocks_init(void)
 	clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
 	clk_register_clkdev(clk[ahb], "ahb", NULL);
 	clk_register_clkdev(clk[cko1], "cko1", NULL);
+	clk_register_clkdev(clk[arm], NULL, "cpu0");
 
 	/*
 	 * The gpmi needs 100MHz frequency in the EDO/Sync mode,
diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c
index 5f1510363ee7..2fdc9bf2fb5e 100644
--- a/arch/arm/mach-imx/lluart.c
+++ b/arch/arm/mach-imx/lluart.c
@@ -17,17 +17,25 @@
 
 #include "hardware.h"
 
+#define IMX6Q_UART1_BASE_ADDR	0x02020000
+#define IMX6Q_UART2_BASE_ADDR	0x021e8000
+#define IMX6Q_UART3_BASE_ADDR	0x021ec000
+#define IMX6Q_UART4_BASE_ADDR	0x021f0000
+#define IMX6Q_UART5_BASE_ADDR	0x021f4000
+
+/*
+ * IMX6Q_UART_BASE_ADDR is put in the middle to force the expansion
+ * of IMX6Q_UART##n##_BASE_ADDR.
+ */
+#define IMX6Q_UART_BASE_ADDR(n)	IMX6Q_UART##n##_BASE_ADDR
+#define IMX6Q_UART_BASE(n)	IMX6Q_UART_BASE_ADDR(n)
+#define IMX6Q_DEBUG_UART_BASE	IMX6Q_UART_BASE(CONFIG_DEBUG_IMX6Q_UART_PORT)
+
 static struct map_desc imx_lluart_desc = {
-#ifdef CONFIG_DEBUG_IMX6Q_UART2
-	.virtual	= MX6Q_IO_P2V(MX6Q_UART2_BASE_ADDR),
-	.pfn		= __phys_to_pfn(MX6Q_UART2_BASE_ADDR),
-	.length		= MX6Q_UART2_SIZE,
-	.type		= MT_DEVICE,
-#endif
-#ifdef CONFIG_DEBUG_IMX6Q_UART4
-	.virtual	= MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR),
-	.pfn		= __phys_to_pfn(MX6Q_UART4_BASE_ADDR),
-	.length		= MX6Q_UART4_SIZE,
+#ifdef CONFIG_DEBUG_IMX6Q_UART
+	.virtual	= IMX_IO_P2V(IMX6Q_DEBUG_UART_BASE),
+	.pfn		= __phys_to_pfn(IMX6Q_DEBUG_UART_BASE),
+	.length		= 0x4000,
 	.type		= MT_DEVICE,
 #endif
 };
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 978b6dd00de4..9511142d436c 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -38,6 +38,40 @@
 #include "cpuidle.h"
 #include "hardware.h"
 
+#define IMX6Q_ANALOG_DIGPROG	0x260
+
+static int imx6q_revision(void)
+{
+	struct device_node *np;
+	void __iomem *base;
+	static u32 rev;
+
+	if (!rev) {
+		np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
+		if (!np)
+			return IMX_CHIP_REVISION_UNKNOWN;
+		base = of_iomap(np, 0);
+		if (!base) {
+			of_node_put(np);
+			return IMX_CHIP_REVISION_UNKNOWN;
+		}
+		rev =  readl_relaxed(base + IMX6Q_ANALOG_DIGPROG);
+		iounmap(base);
+		of_node_put(np);
+	}
+
+	switch (rev & 0xff) {
+	case 0:
+		return IMX_CHIP_REVISION_1_0;
+	case 1:
+		return IMX_CHIP_REVISION_1_1;
+	case 2:
+		return IMX_CHIP_REVISION_1_2;
+	default:
+		return IMX_CHIP_REVISION_UNKNOWN;
+	}
+}
+
 void imx6q_restart(char mode, const char *cmd)
 {
 	struct device_node *np;
@@ -192,6 +226,7 @@ static void __init imx6q_timer_init(void)
 {
 	mx6q_clocks_init();
 	twd_local_timer_of_register();
+	imx_print_silicon_rev("i.MX6Q", imx6q_revision());
 }
 
 static struct sys_timer imx6q_timer = {
diff --git a/arch/arm/mach-imx/mx6q.h b/arch/arm/mach-imx/mx6q.h
index f7e7dbac8f4b..19d3f54db5af 100644
--- a/arch/arm/mach-imx/mx6q.h
+++ b/arch/arm/mach-imx/mx6q.h
@@ -27,9 +27,5 @@
 #define MX6Q_CCM_SIZE			0x4000
 #define MX6Q_ANATOP_BASE_ADDR		0x020c8000
 #define MX6Q_ANATOP_SIZE		0x1000
-#define MX6Q_UART2_BASE_ADDR		0x021e8000
-#define MX6Q_UART2_SIZE			0x4000
-#define MX6Q_UART4_BASE_ADDR		0x021f0000
-#define MX6Q_UART4_SIZE			0x4000
 
 #endif	/* __MACH_MX6Q_H__ */