diff options
| author |   Rod Whitby <rod@whitby.id.au> | 2008-04-01 10:53:23 +0100 |
|---|---|---|
| committer |   Russell King <rmk+kernel@arm.linux.org.uk> | 2008-04-04 10:03:59 +0100 |
| commit | 7e36e2f5355ab87f8946041d044b34cda01e2077 (patch) | |
| tree | 634798504df6b50a1001b0ea439d3d0987c46319 /arch/arm/mach-ixp4xx/Kconfig | |
| parent | Linux 2.6.25-rc7 (diff) | |
| download | linux-dev-7e36e2f5355ab87f8946041d044b34cda01e2077.tar.xz linux-dev-7e36e2f5355ab87f8946041d044b34cda01e2077.zip | |
[ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board
The Freecom-FSG3 is a small network-attached-storage device with the
following feature set:
* Intel IXP422
* 4MB Flash (ixp4xx flash driver)
* 64MB RAM
* 4 USB 2.0 host ports (ehci and ohci drivers)
* 1 WAN (eth1) and 3 LAN (eth0) ethernet ports
* Supported by the open source ixp4xx ethernet driver
* Via VT6421 disk controller (libata and sata-via drivers)
* Internal hard disk (PATA supported, SATA not yet supported)
* External SATA port (not yet supported)
* ISL1208 RTC chip
* Winbond 83782 temp sensor and fan controller
* MiniPCI slot
The ixp4xx_defconfig is also updated to support this device (the
leds-fsg driver is to be submitted separately via the leds tree after
this initial support is merged, as it depends on header gpio defines).
Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/mach-ixp4xx/Kconfig')
| -rw-r--r-- | arch/arm/mach-ixp4xx/Kconfig | 9 |
1 files changed, 9 insertions, 0 deletions
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index e774447c0592..db8b5fe06c0d 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -125,6 +125,15 @@ config ARCH_IXDP4XX depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435 default y +config MACH_FSG + bool + prompt "Freecom FSG-3" + select PCI + help + Say 'Y' here if you want your kernel to support Freecom's + FSG-3 device. For more information on this platform, + see http://www.nslu2-linux.org/wiki/FSG3/HomePage + # # Certain registers and IRQs are only enabled if supporting IXP465 CPUs # |