Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] Fix some section mismatch warnings
  [ARM] 4417/1: Serial: Fix AMBA drivers locking
  [ARM] 4394/1: ARMv7: Add the TLB range operations
  [ARM] 4410/1: Remove extern declarations in coyote/ixdpg425-pci.c
  [ARM] 4416/1: NWFPE: fix undeclared symbols
  [ARM] 4415/1: AML5900: fix sparse warnings from map_io
  [ARM] 4414/1: S3C2443: sparse fix for clock.c
  [ARM] 4412/1: S3C2412: reset errata fix
  [ARM] 4411/1: KS8695: Another serial driver fix
  [ARM] oprofile: avoid lockdep warnings on mpcore oprofile init
  [ARM] Fix stacktrace FP range checking
  [ARM] use __used attribute
  [ARM] enable arbitary speed tty ioctls and split input/output speed
  [ARM] remove unused header file: arch/arm/mach-s3c2410/bast.h
  [ARM] 4406/1: Trivial NSLU2 / NAS-100D header & setup code cleanup
  [ARM] 4405/1: NSLU2, DSM-G600 frequency fixup code
  [ARM] 4404/1: Trivial IXP42x Kconfig cleanup
  [ARM] 4403/1: Make the PXA-I2C driver work with lockdep validator
  [ARM] 4402/1: S3C2443: Add physical address of HSMMC controller
  [ARM] 4401/1: S3C2443: Add definitions for port GPIOJ

7 files changed, 43 insertions, 34 deletions

diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 9715ef506c24..060909870b50 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -104,9 +104,6 @@ config MACH_DSMG600
 	  DSM-G600 RevA device. For more information on this platform,
 	  see http://www.nslu2-linux.org/wiki/DSMG600/HomePage
 
-#
-# Avila and IXDP share the same source for now. Will change in future
-#
 config	ARCH_IXDP4XX
 	bool
 	depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 64685da1462d..8112f726ffa0 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -283,7 +283,7 @@ static struct irqaction ixp4xx_timer_irq = {
 	.handler	= ixp4xx_timer_interrupt,
 };
 
-static void __init ixp4xx_timer_init(void)
+void __init ixp4xx_timer_init(void)
 {
 	/* Reset/disable counter */
 	*IXP4XX_OSRT1 = 0;
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
index 7bc94f3def1c..ad2e5b97966e 100644
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -25,10 +25,6 @@
 
 #include <asm/mach/pci.h>
 
-extern void ixp4xx_pci_preinit(void);
-extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-
 void __init coyote_pci_preinit(void)
 {
 	set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW);
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 1caff65e22cc..1e75e105c4f7 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -18,6 +18,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
+#include <asm/mach/time.h>
 
 static struct flash_platform_data dsmg600_flash_data = {
 	.map_name		= "cfi_probe",
@@ -128,6 +129,19 @@ static void dsmg600_power_off(void)
 	gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH);
 }
 
+static void __init dsmg600_timer_init(void)
+{
+    /* The xtal on this machine is non-standard. */
+    ixp4xx_timer_freq = DSMG600_FREQ;
+
+    /* Call standard timer_init function. */
+    ixp4xx_timer_init();
+}
+
+static struct sys_timer dsmg600_timer = {
+    .init   = dsmg600_timer_init,
+};
+
 static void __init dsmg600_init(void)
 {
 	ixp4xx_sys_init();
@@ -155,21 +169,13 @@ static void __init dsmg600_init(void)
 #endif
 }
 
-static void __init dsmg600_fixup(struct machine_desc *desc,
-                struct tag *tags, char **cmdline, struct meminfo *mi)
-{
-       /* The xtal on this machine is non-standard. */
-        ixp4xx_timer_freq = DSMG600_FREQ;
-}
-
 MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
 	/* Maintainer: www.nslu2-linux.org */
 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
-	.fixup          = dsmg600_fixup,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
-	.timer          = &ixp4xx_timer,
+	.timer          = &dsmg600_timer,
 	.init_machine	= dsmg600_init,
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
index 509a95a692a4..d1e75b7dc3b1 100644
--- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
@@ -23,10 +23,6 @@
 
 #include <asm/mach/pci.h>
 
-extern void ixp4xx_pci_preinit(void);
-extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-
 void __init ixdpg425_pci_preinit(void)
 {
 	set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 9a31444d9214..78a17413ceca 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -155,7 +155,8 @@ static void __init nas100d_init(void)
 
 	pm_power_off = nas100d_power_off;
 
-	/* This is only useful on a modified machine, but it is valuable
+	/*
+	 * This is only useful on a modified machine, but it is valuable
 	 * to have it first in order to see debug messages, and so that
 	 * it does *not* get removed if platform_add_devices fails!
 	 */
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 162c266e5f8f..9bf8ccbcaccf 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -22,6 +22,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
+#include <asm/mach/time.h>
 
 static struct flash_platform_data nslu2_flash_data = {
 	.map_name		= "cfi_probe",
@@ -49,26 +50,26 @@ static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
 static struct resource nslu2_led_resources[] = {
 	{
 		.name		= "ready",  /* green led */
-		.start		= NSLU2_LED_GRN,
-		.end		= NSLU2_LED_GRN,
+		.start		= NSLU2_LED_GRN_GPIO,
+		.end		= NSLU2_LED_GRN_GPIO,
 		.flags		= IXP4XX_GPIO_HIGH,
 	},
 	{
 		.name		= "status", /* red led */
-		.start		= NSLU2_LED_RED,
-		.end		= NSLU2_LED_RED,
+		.start		= NSLU2_LED_RED_GPIO,
+		.end		= NSLU2_LED_RED_GPIO,
 		.flags		= IXP4XX_GPIO_HIGH,
 	},
 	{
 		.name		= "disk-1",
-		.start		= NSLU2_LED_DISK1,
-		.end		= NSLU2_LED_DISK1,
+		.start		= NSLU2_LED_DISK1_GPIO,
+		.end		= NSLU2_LED_DISK1_GPIO,
 		.flags		= IXP4XX_GPIO_LOW,
 	},
 	{
 		.name		= "disk-2",
-		.start		= NSLU2_LED_DISK2,
-		.end		= NSLU2_LED_DISK2,
+		.start		= NSLU2_LED_DISK2_GPIO,
+		.end		= NSLU2_LED_DISK2_GPIO,
 		.flags		= IXP4XX_GPIO_LOW,
 	},
 };
@@ -157,10 +158,21 @@ static void nslu2_power_off(void)
 	gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
 }
 
-static void __init nslu2_init(void)
+static void __init nslu2_timer_init(void)
 {
-	ixp4xx_timer_freq = NSLU2_FREQ;
+    /* The xtal on this machine is non-standard. */
+    ixp4xx_timer_freq = NSLU2_FREQ;
+
+    /* Call standard timer_init function. */
+    ixp4xx_timer_init();
+}
 
+static struct sys_timer nslu2_timer = {
+    .init   = nslu2_timer_init,
+};
+
+static void __init nslu2_init(void)
+{
 	ixp4xx_sys_init();
 
 	nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
@@ -169,7 +181,8 @@ static void __init nslu2_init(void)
 
 	pm_power_off = nslu2_power_off;
 
-	/* This is only useful on a modified machine, but it is valuable
+	/*
+	 * This is only useful on a modified machine, but it is valuable
 	 * to have it first in order to see debug messages, and so that
 	 * it does *not* get removed if platform_add_devices fails!
 	 */
@@ -185,6 +198,6 @@ MACHINE_START(NSLU2, "Linksys NSLU2")
 	.boot_params	= 0x00000100,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
-	.timer          = &ixp4xx_timer,
+	.timer          = &nslu2_timer,
 	.init_machine	= nslu2_init,
 MACHINE_END