aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap1/board-generic.c
diff options
context:
space:
mode:
authorJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>2009-10-22 14:47:42 -0700
committerTony Lindgren <tony@atomide.com>2009-10-22 14:47:42 -0700
commitc33da3a80074094303d643a90ef589330b491270 (patch)
tree64c8a0d9a56a4590e21641c04deae0b6a66eb8c0 /arch/arm/mach-omap1/board-generic.c
parentomap: iommu: fix wrong condition check for SUPERSECTION (diff)
downloadlinux-dev-c33da3a80074094303d643a90ef589330b491270.tar.xz
linux-dev-c33da3a80074094303d643a90ef589330b491270.zip
omap1: Fix redundant UARTs pin muxing that can break other hardware support
Commit 15ac408ee5a509053a765b816e9179515329369f removed enabled_uart and OMAP_TAG_UART. This works for mach-omap2, but causes issues on mach-omap1 for some boards as the mach-omap1 serial.c was muxing pins based on the enabled_uart flag for 15xx. Fix this by muxing pins in board-*.c files for the 15xx boards for the uart ports that had enabled_uart flag set before the commit above. Tested on Amsdtrad Delta only. Note that in the future we should add support for powering down the uarts with a timer like mach-omap2/serial.c does. Otherwise the enabled uarts will be blocking retention-while-idle. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/mach-omap1/board-generic.c')
-rw-r--r--arch/arm/mach-omap1/board-generic.c8
1 files changed, 8 insertions, 0 deletions
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index fb47239da72f..6c8a41f20e51 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -64,6 +64,14 @@ static void __init omap_generic_init(void)
{
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap15xx()) {
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
omap_usb_init(&generic1510_usb_config);
}
#endif