Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc driver specific changes from Olof Johansson:
 - A long-coming conversion of various platforms to a common LED
   infrastructure
 - AT91 is moved over to use the newer MCI driver for MMC
 - Pincontrol conversions for samsung platforms
 - DT bindings for gscaler on samsung
 - i2c driver fixes for tegra, acked by i2c maintainer

Fix up conflicts as per Olof.

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  drivers: bus: omap_l3: use resources instead of hardcoded irqs
  pinctrl: exynos: Fix wakeup IRQ domain registration check
  pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data
  pinctrl: exynos: Correct the detection of wakeup-eint node
  pinctrl: exynos: Mark exynos_irq_demux_eint as inline
  pinctrl: exynos: Handle only unmasked wakeup interrupts
  pinctrl: exynos: Fix typos in gpio/wkup _irq_mask
  pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa
  drivers: bus: Move the OMAP interconnect driver to drivers/bus/
  i2c: tegra: dynamically control fast clk
  i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20
  ARM: tegra: clock: remove unused clock entry for i2c
  ARM: tegra: clock: add connection name in i2c clock entry
  i2c: tegra: pass proper name for getting clock
  ARM: tegra: clock: add i2c fast clock entry in clock table
  ARM: EXYNOS: Adds G-Scaler device from Device Tree
  ARM: EXYNOS: Add clock support for G-Scaler
  ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform
  ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC
  ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used
  ...

11 files changed, 97 insertions, 463 deletions

diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 398e9e53e189..cd169c386161 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -61,14 +61,6 @@ obj-$(CONFIG_ARCH_OMAP850)		+= gpio7xx.o
 obj-$(CONFIG_ARCH_OMAP15XX)		+= gpio15xx.o
 obj-$(CONFIG_ARCH_OMAP16XX)		+= gpio16xx.o
 
-# LEDs support
-led-$(CONFIG_MACH_OMAP_H2)		+= leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_H3)		+= leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_INNOVATOR)	+= leds-innovator.o
-led-$(CONFIG_MACH_OMAP_PERSEUS2)	+= leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_OSK)		+= leds-osk.o
-obj-$(CONFIG_LEDS)			+= $(led-y)
-
 ifneq ($(CONFIG_FB_OMAP),)
 obj-y += lcd_dma.o
 endif
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index af283a2bc7c7..376f7f29ef77 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -32,6 +32,7 @@
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/leds.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -307,12 +308,39 @@ static struct platform_device h2_irda_device = {
 	.resource	= h2_irda_resources,
 };
 
+static struct gpio_led h2_gpio_led_pins[] = {
+	{
+		.name		= "h2:red",
+		.default_trigger = "heartbeat",
+		.gpio		= 3,
+	},
+	{
+		.name		= "h2:green",
+		.default_trigger = "cpu0",
+		.gpio		= OMAP_MPUIO(4),
+	},
+};
+
+static struct gpio_led_platform_data h2_gpio_led_data = {
+	.leds		= h2_gpio_led_pins,
+	.num_leds	= ARRAY_SIZE(h2_gpio_led_pins),
+};
+
+static struct platform_device h2_gpio_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &h2_gpio_led_data,
+	},
+};
+
 static struct platform_device *h2_devices[] __initdata = {
 	&h2_nor_device,
 	&h2_nand_device,
 	&h2_smc91x_device,
 	&h2_irda_device,
 	&h2_kp_device,
+	&h2_gpio_leds,
 };
 
 static void __init h2_init_smc91x(void)
@@ -407,6 +435,10 @@ static void __init h2_init(void)
 	omap_cfg_reg(E19_1610_KBR4);
 	omap_cfg_reg(N19_1610_KBR5);
 
+	/* GPIO based LEDs */
+	omap_cfg_reg(P18_1610_GPIO3);
+	omap_cfg_reg(MPUIO4);
+
 	h2_smc91x_resources[1].start = gpio_to_irq(0);
 	h2_smc91x_resources[1].end = gpio_to_irq(0);
 	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 06d11b1ee9c6..ededdb7ef28c 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -32,6 +32,7 @@
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/leds.h>
 
 #include <asm/setup.h>
 #include <asm/page.h>
@@ -325,6 +326,32 @@ static struct spi_board_info h3_spi_board_info[] __initdata = {
 	},
 };
 
+static struct gpio_led h3_gpio_led_pins[] = {
+	{
+		.name		= "h3:red",
+		.default_trigger = "heartbeat",
+		.gpio		= 3,
+	},
+	{
+		.name		= "h3:green",
+		.default_trigger = "cpu0",
+		.gpio		= OMAP_MPUIO(4),
+	},
+};
+
+static struct gpio_led_platform_data h3_gpio_led_data = {
+	.leds		= h3_gpio_led_pins,
+	.num_leds	= ARRAY_SIZE(h3_gpio_led_pins),
+};
+
+static struct platform_device h3_gpio_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &h3_gpio_led_data,
+	},
+};
+
 static struct platform_device *devices[] __initdata = {
 	&nor_device,
 	&nand_device,
@@ -332,6 +359,7 @@ static struct platform_device *devices[] __initdata = {
 	&intlat_device,
 	&h3_kp_device,
 	&h3_lcd_device,
+	&h3_gpio_leds,
 };
 
 static struct omap_usb_config h3_usb_config __initdata = {
@@ -399,6 +427,10 @@ static void __init h3_init(void)
 	omap_cfg_reg(E19_1610_KBR4);
 	omap_cfg_reg(N19_1610_KBR5);
 
+	/* GPIO based LEDs */
+	omap_cfg_reg(P18_1610_GPIO3);
+	omap_cfg_reg(MPUIO4);
+
 	smc91x_resources[1].start = gpio_to_irq(40);
 	smc91x_resources[1].end = gpio_to_irq(40);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 2f1f9b967576..5973945a8741 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -382,10 +382,37 @@ static struct platform_device osk5912_lcd_device = {
 	.id		= -1,
 };
 
+static struct gpio_led mistral_gpio_led_pins[] = {
+	{
+		.name		= "mistral:red",
+		.default_trigger = "heartbeat",
+		.gpio		= 3,
+	},
+	{
+		.name		= "mistral:green",
+		.default_trigger = "cpu0",
+		.gpio		= OMAP_MPUIO(4),
+	},
+};
+
+static struct gpio_led_platform_data mistral_gpio_led_data = {
+	.leds		= mistral_gpio_led_pins,
+	.num_leds	= ARRAY_SIZE(mistral_gpio_led_pins),
+};
+
+static struct platform_device mistral_gpio_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &mistral_gpio_led_data,
+	},
+};
+
 static struct platform_device *mistral_devices[] __initdata = {
 	&osk5912_kp_device,
 	&mistral_bl_device,
 	&osk5912_lcd_device,
+	&mistral_gpio_leds,
 };
 
 static int mistral_get_pendown_state(void)
@@ -510,6 +537,12 @@ static void __init osk_mistral_init(void)
 	if (gpio_request(2, "lcd_pwr") == 0)
 		gpio_direction_output(2, 1);
 
+	/*
+	 * GPIO based LEDs
+	 */
+	omap_cfg_reg(P18_1610_GPIO3);
+	omap_cfg_reg(MPUIO4);
+
 	i2c_register_board_info(1, mistral_i2c_board_info,
 			ARRAY_SIZE(mistral_i2c_board_info));
 
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
deleted file mode 100644
index 6f958aec9459..000000000000
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-h2p2-debug.c
- *
- * Copyright 2003 by Texas Instruments Incorporated
- *
- * There are 16 LEDs on the debug board (all green); four may be used
- * for logical 'green', 'amber', 'red', and 'blue' (after "claiming").
- *
- * The "surfer" expansion board and H2 sample board also have two-color
- * green+red LEDs (in parallel), used here for timer and idle indicators.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-#include <linux/platform_data/gpio-omap.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <plat/fpga.h>
-
-#include "leds.h"
-
-
-#define GPIO_LED_RED		3
-#define GPIO_LED_GREEN		OMAP_MPUIO(4)
-
-
-#define LED_STATE_ENABLED	0x01
-#define LED_STATE_CLAIMED	0x02
-#define LED_TIMER_ON		0x04
-
-#define GPIO_IDLE		GPIO_LED_GREEN
-#define GPIO_TIMER		GPIO_LED_RED
-
-
-void h2p2_dbg_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	static struct h2p2_dbg_fpga __iomem *fpga;
-	static u16 led_state, hw_led_state;
-
-	local_irq_save(flags);
-
-	if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
-		goto done;
-
-	switch (evt) {
-	case led_start:
-		if (!fpga)
-			fpga = ioremap(H2P2_DBG_FPGA_START,
-						H2P2_DBG_FPGA_SIZE);
-		if (fpga) {
-			led_state |= LED_STATE_ENABLED;
-			__raw_writew(~0, &fpga->leds);
-		}
-		break;
-
-	case led_stop:
-	case led_halted:
-		/* all leds off during suspend or shutdown */
-
-		if (! machine_is_omap_perseus2()) {
-			gpio_set_value(GPIO_TIMER, 0);
-			gpio_set_value(GPIO_IDLE, 0);
-		}
-
-		led_state &= ~LED_STATE_ENABLED;
-		if (fpga) {
-			__raw_writew(~0, &fpga->leds);
-			if (evt == led_halted) {
-				iounmap(fpga);
-				fpga = NULL;
-			}
-		}
-
-		goto done;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		led_state ^= LED_TIMER_ON;
-
-		if (machine_is_omap_perseus2())
-			hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
-		else {
-			gpio_set_value(GPIO_TIMER, led_state & LED_TIMER_ON);
-			goto done;
-		}
-
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (machine_is_omap_perseus2())
-			hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
-		else {
-			gpio_set_value(GPIO_IDLE, 1);
-			goto done;
-		}
-
-		break;
-
-	case led_idle_end:
-		if (machine_is_omap_perseus2())
-			hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
-		else {
-			gpio_set_value(GPIO_IDLE, 0);
-			goto done;
-		}
-
-		break;
-#endif
-
-	case led_green_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
-		break;
-	case led_green_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
-		break;
-
-	case led_amber_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
-		break;
-	case led_amber_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
-		break;
-
-	case led_red_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_RED;
-		break;
-	case led_red_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
-		break;
-
-	case led_blue_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
-		break;
-	case led_blue_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
-		break;
-
-	default:
-		break;
-	}
-
-
-	/*
-	 *  Actually burn the LEDs
-	 */
-	if (led_state & LED_STATE_ENABLED && fpga)
-		__raw_writew(~hw_led_state, &fpga->leds);
-
-done:
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c
deleted file mode 100644
index 3a066ee8d02c..000000000000
--- a/arch/arm/mach-omap1/leds-innovator.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-innovator.c
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void innovator_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = 0;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		hw_led_state = 0;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= 0;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= 0;
-		break;
-
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~0;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~0;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= 0;
-		break;
-
-	case led_amber_on:
-		break;
-
-	case led_amber_off:
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~0;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= 0;
-		break;
-
-	default:
-		break;
-	}
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
deleted file mode 100644
index 936ed426b84f..000000000000
--- a/arch/arm/mach-omap1/leds-osk.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-osk.c
- *
- * LED driver for OSK with optional Mistral QVGA board
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	(1 << 0)
-#define LED_STATE_CLAIMED	(1 << 1)
-static u8 led_state;
-
-#define	TIMER_LED		(1 << 3)	/* Mistral board */
-#define	IDLE_LED		(1 << 4)	/* Mistral board */
-static u8 hw_led_state;
-
-
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-
-/* For now, all system indicators require the Mistral board, since that
- * LED can be manipulated without a task context.  This LED is either red,
- * or green, but not both; it can't give the full "disco led" effect.
- */
-
-#define GPIO_LED_RED		3
-#define GPIO_LED_GREEN		OMAP_MPUIO(4)
-
-static void mistral_setled(void)
-{
-	int	red = 0;
-	int	green = 0;
-
-	if (hw_led_state & TIMER_LED)
-		red = 1;
-	else if (hw_led_state & IDLE_LED)
-		green = 1;
-	/* else both sides are disabled */
-
-	gpio_set_value(GPIO_LED_GREEN, green);
-	gpio_set_value(GPIO_LED_RED, red);
-}
-
-#endif
-
-void osk_leds_event(led_event_t evt)
-{
-	unsigned long	flags;
-	u16		leds;
-
-	local_irq_save(flags);
-
-	if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
-		goto done;
-
-	leds = hw_led_state;
-	switch (evt) {
-	case led_start:
-		led_state |= LED_STATE_ENABLED;
-		hw_led_state = 0;
-		leds = ~0;
-		break;
-
-	case led_halted:
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		hw_led_state = 0;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		leds = ~0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-
-	case led_timer:
-		hw_led_state ^= TIMER_LED;
-		mistral_setled();
-		break;
-
-	case led_idle_start:	/* idle == off */
-		hw_led_state &= ~IDLE_LED;
-		mistral_setled();
-		break;
-
-	case led_idle_end:
-		hw_led_state |= IDLE_LED;
-		mistral_setled();
-		break;
-
-#endif	/* CONFIG_OMAP_OSK_MISTRAL */
-
-	default:
-		break;
-	}
-
-	leds ^= hw_led_state;
-
-done:
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
deleted file mode 100644
index 4071479f7106..000000000000
--- a/arch/arm/mach-omap1/leds.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds.c
- *
- * OMAP LEDs dispatcher
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_data/gpio-omap.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <mach/mux.h>
-
-#include "leds.h"
-
-static int __init
-omap_leds_init(void)
-{
-	if (!cpu_class_is_omap1())
-		return -ENODEV;
-
-	if (machine_is_omap_innovator())
-		leds_event = innovator_leds_event;
-
-	else if (machine_is_omap_h2()
-			|| machine_is_omap_h3()
-			|| machine_is_omap_perseus2())
-		leds_event = h2p2_dbg_leds_event;
-
-	else if (machine_is_omap_osk())
-		leds_event = osk_leds_event;
-
-	else
-		return -1;
-
-	if (machine_is_omap_h2()
-			|| machine_is_omap_h3()
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-			|| machine_is_omap_osk()
-#endif
-			) {
-
-		/* LED1/LED2 pins can be used as GPIO (as done here), or by
-		 * the LPG (works even in deep sleep!), to drive a bicolor
-		 * LED on the H2 sample board, and another on the H2/P2
-		 * "surfer" expansion board.
-		 *
-		 * The same pins drive a LED on the OSK Mistral board, but
-		 * that's a different kind of LED (just one color at a time).
-		 */
-		omap_cfg_reg(P18_1610_GPIO3);
-		if (gpio_request(3, "LED red") == 0)
-			gpio_direction_output(3, 1);
-		else
-			printk(KERN_WARNING "LED: can't get GPIO3/red?\n");
-
-		omap_cfg_reg(MPUIO4);
-		if (gpio_request(OMAP_MPUIO(4), "LED green") == 0)
-			gpio_direction_output(OMAP_MPUIO(4), 1);
-		else
-			printk(KERN_WARNING "LED: can't get MPUIO4/green?\n");
-	}
-
-	leds_event(led_start);
-	return 0;
-}
-
-__initcall(omap_leds_init);
diff --git a/arch/arm/mach-omap1/leds.h b/arch/arm/mach-omap1/leds.h
deleted file mode 100644
index a1e9fedc376c..000000000000
--- a/arch/arm/mach-omap1/leds.h
+++ /dev/null
@@ -1,3 +0,0 @@
-extern void innovator_leds_event(led_event_t evt);
-extern void h2p2_dbg_leds_event(led_event_t evt);
-extern void osk_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 4062480bfec7..4d4816fd6fc9 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -44,7 +44,6 @@
 #include <linux/clockchips.h>
 #include <linux/io.h>
 
-#include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/sched_clock.h>
 
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index eae49c3980c9..74529549130c 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -46,7 +46,6 @@
 #include <linux/clockchips.h>
 #include <linux/io.h>
 
-#include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>