Merge tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc power management changes from Arnd Bergmann:
 "These are various power management related changes, mainly concerning
  cpuidle on i.MX and OMAP, as well as a the move of the omap
  smartreflex driver to live in the power subsystem."

Fix up conflicts in arch/arm/mach-{imx/mach-imx6q.c,omap2/prm2xxx_3xxx.h}

* tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
  ARM: OMAP2+: PM: fix IRQ_NOAUTOEN removal by mis-merge
  ARM: OMAP2+: do not allow SmartReflex to be built as a module
  ARM: OMAP2: Use hwmod to initialize mmc for 2420
  ARM: OMAP3: PM: cpuidle: optimize the clkdm idle latency in C1 state
  ARM: OMAP3: PM: cpuidle: optimize the PER latency in C1 state
  ARM: OMAP3: PM: cpuidle: default to C1 in next_valid_state
  ARM: OMAP3: PM: cleanup cam_pwrdm leftovers
  ARM: OMAP3: PM: call pre/post transition per powerdomain
  ARM: OMAP2+: powerdomain: allow pre/post transtion to be per pwrdm
  ARM: OMAP3: PM: Remove IO Daisychain control from cpuidle
  ARM: OMAP3PLUS: hwmod: reconfigure IO Daisychain during hwmod mux
  ARM: OMAP3+: PRM: Enable IO wake up
  ARM: OMAP4: PRM: Add IO Daisychain support
  ARM: OMAP3: PM: Move IO Daisychain function to omap3 prm file
  ARM: OMAP3: PM: correct enable/disable of daisy io chain
  ARM: OMAP2+: PRM: fix compile for OMAP4-only build
  W1: OMAP HDQ1W: use runtime PM
  ARM: OMAP2+: HDQ1W: use omap_device
  W1: OMAP HDQ1W: use 32-bit register accesses
  W1: OMAP HDQ1W: allow driver to be built on all OMAP2+
  ...

1 files changed, 48 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index 21cb74003a56..a0309dea6794 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -302,11 +302,59 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask)
 				OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 }
 
+/**
+ * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
+ *
+ * Clear any previously-latched I/O wakeup events and ensure that the
+ * I/O wakeup gates are aligned with the current mux settings.  Works
+ * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
+ * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit.  No
+ * return value.
+ */
+void omap3xxx_prm_reconfigure_io_chain(void)
+{
+	int i = 0;
+
+	omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+				   PM_WKEN);
+
+	omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
+			  OMAP3430_ST_IO_CHAIN_MASK,
+			  MAX_IOPAD_LATCH_TIME, i);
+	if (i == MAX_IOPAD_LATCH_TIME)
+		pr_warn("PRM: I/O chain clock line assertion timed out\n");
+
+	omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+				     PM_WKEN);
+
+	omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD,
+				   PM_WKST);
+
+	omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
+}
+
+/**
+ * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
+ *
+ * Activates the I/O wakeup event latches and allows events logged by
+ * those latches to signal a wakeup event to the PRCM.  For I/O
+ * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux
+ * registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
+ * No return value.
+ */
+static void __init omap3xxx_prm_enable_io_wakeup(void)
+{
+	if (omap3_has_io_wakeup())
+		omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
+					   PM_WKEN);
+}
+
 static int __init omap3xxx_prcm_init(void)
 {
 	int ret = 0;
 
 	if (cpu_is_omap34xx()) {
+		omap3xxx_prm_enable_io_wakeup();
 		ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
 		if (!ret)
 			irq_set_status_flags(omap_prcm_event_to_irq("io"),