Merge tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

power management changes for omap and imx

A significant part of the changes for these two platforms went into
power management, so they are split out into a separate branch.

* tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (65 commits)
  ARM: imx6: remove __CPUINIT annotation from v7_invalidate_l1
  ARM: imx6: fix v7_invalidate_l1 by adding I-Cache invalidation
  ARM: imx6q: resume PL310 only when CACHE_L2X0 defined
  ARM: imx6q: build pm code only when CONFIG_PM selected
  ARM: mx5: use generic irq chip pm interface for pm functions on
  ARM: omap: pass minimal SoC/board data for UART from dt
  arm/dts: Add minimal device tree support for omap2420 and omap2430
  omap-serial: Add minimal device tree support
  omap-serial: Use default clock speed (48Mhz) if not specified
  omap-serial: Get rid of all pdev->id usage
  ARM: OMAP2+: hwmod: Add a new flag to handle hwmods left enabled at init
  ARM: OMAP4: PRM: use PRCM interrupt handler
  ARM: OMAP3: pm: use prcm chain handler
  ARM: OMAP: hwmod: add support for selecting mpu_irq for each wakeup pad
  ARM: OMAP2+: mux: add support for PAD wakeup interrupts
  ARM: OMAP: PRCM: add suspend prepare / finish support
  ARM: OMAP: PRCM: add support for chain interrupt handler
  ARM: OMAP3/4: PRM: add functions to read pending IRQs, PRM barrier
  ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup
  ARM: OMAP2+: mux: add wakeup-capable hwmod mux entries to dynamic list
  ...

1 files changed, 96 insertions, 1 deletions

diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index 9a08ba397327..c1c4d86a79a8 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -1,7 +1,7 @@
 /*
  * OMAP2/3 PRM module functions
  *
- * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010-2011 Texas Instruments, Inc.
  * Copyright (C) 2010 Nokia Corporation
  * Benoît Cousson
  * Paul Walmsley
@@ -27,6 +27,24 @@
 #include "prm-regbits-24xx.h"
 #include "prm-regbits-34xx.h"
 
+static const struct omap_prcm_irq omap3_prcm_irqs[] = {
+	OMAP_PRCM_IRQ("wkup",	0,	0),
+	OMAP_PRCM_IRQ("io",	9,	1),
+};
+
+static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
+	.ack			= OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
+	.mask			= OMAP3_PRM_IRQENABLE_MPU_OFFSET,
+	.nr_regs		= 1,
+	.irqs			= omap3_prcm_irqs,
+	.nr_irqs		= ARRAY_SIZE(omap3_prcm_irqs),
+	.irq			= INT_34XX_PRCM_MPU_IRQ,
+	.read_pending_irqs	= &omap3xxx_prm_read_pending_irqs,
+	.ocp_barrier		= &omap3xxx_prm_ocp_barrier,
+	.save_and_clear_irqen	= &omap3xxx_prm_save_and_clear_irqen,
+	.restore_irqen		= &omap3xxx_prm_restore_irqen,
+};
+
 u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
 {
 	return __raw_readl(prm_base + module + idx);
@@ -212,3 +230,80 @@ u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
 {
 	return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
 }
+
+/**
+ * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
+ * @events: ptr to a u32, preallocated by caller
+ *
+ * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM
+ * MPU IRQs, and store the result into the u32 pointed to by @events.
+ * No return value.
+ */
+void omap3xxx_prm_read_pending_irqs(unsigned long *events)
+{
+	u32 mask, st;
+
+	/* XXX Can the mask read be avoided (e.g., can it come from RAM?) */
+	mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+	st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+	events[0] = mask & st;
+}
+
+/**
+ * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
+ *
+ * Force any buffered writes to the PRM IP block to complete.  Needed
+ * by the PRM IRQ handler, which reads and writes directly to the IP
+ * block, to avoid race conditions after acknowledging or clearing IRQ
+ * bits.  No return value.
+ */
+void omap3xxx_prm_ocp_barrier(void)
+{
+	omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
+}
+
+/**
+ * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg
+ * @saved_mask: ptr to a u32 array to save IRQENABLE bits
+ *
+ * Save the PRM_IRQENABLE_MPU register to @saved_mask.  @saved_mask
+ * must be allocated by the caller.  Intended to be used in the PRM
+ * interrupt handler suspend callback.  The OCP barrier is needed to
+ * ensure the write to disable PRM interrupts reaches the PRM before
+ * returning; otherwise, spurious interrupts might occur.  No return
+ * value.
+ */
+void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
+{
+	saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
+					       OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+	omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+
+	/* OCP barrier */
+	omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
+}
+
+/**
+ * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args
+ * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
+ *
+ * Restore the PRM_IRQENABLE_MPU register from @saved_mask.  Intended
+ * to be used in the PRM interrupt handler resume callback to restore
+ * values saved by omap3xxx_prm_save_and_clear_irqen().  No OCP
+ * barrier should be needed here; any pending PRM interrupts will fire
+ * once the writes reach the PRM.  No return value.
+ */
+void omap3xxx_prm_restore_irqen(u32 *saved_mask)
+{
+	omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
+				OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+}
+
+static int __init omap3xxx_prcm_init(void)
+{
+	if (cpu_is_omap34xx())
+		return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
+	return 0;
+}
+subsys_initcall(omap3xxx_prcm_init);