ARM: realview: delete the RealView board files

The device tree boot is now feature-complete and fully working,
so remove all the RealView board files. Move the remaining
realview_cpu_die() function frome "core.h" to the new "hotplug.h"
and leave just a minimal device tree core.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 0 insertions, 385 deletions

diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
deleted file mode 100644
index a90a0752f157..000000000000
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ /dev/null
@@ -1,385 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/realview_pb11mp.c
- *
- *  Copyright (C) 2008 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/clk-realview.h>
-#include <linux/reboot.h>
-
-#include "hardware.h"
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/pgtable.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/smp_twd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/outercache.h>
-
-#include "board-pb11mp.h"
-#include "irqs-pb11mp.h"
-
-#include "core.h"
-
-static struct map_desc realview_pb11mp_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {	/* Maps the SCU, GIC CPU interface, TWD, GIC DIST */
-		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_PRIV_MEM_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_PRIV_MEM_BASE),
-		.length		= REALVIEW_TC11MP_PRIV_MEM_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_TIMER0_1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_TIMER2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_L220_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_L220_BASE),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#endif
-};
-
-static void __init realview_pb11mp_map_io(void)
-{
-	iotable_init(realview_pb11mp_io_desc, ARRAY_SIZE(realview_pb11mp_io_desc));
-}
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-/*
- * RealView PB11MPCore AMBA devices
- */
-
-#define GPIO2_IRQ		{ IRQ_PB11MP_GPIO2 }
-#define GPIO3_IRQ		{ IRQ_PB11MP_GPIO3 }
-#define AACI_IRQ		{ IRQ_TC11MP_AACI }
-#define MMCI0_IRQ		{ IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B }
-#define KMI0_IRQ		{ IRQ_TC11MP_KMI0 }
-#define KMI1_IRQ		{ IRQ_TC11MP_KMI1 }
-#define PB11MP_SMC_IRQ		{ }
-#define MPMC_IRQ		{ }
-#define PB11MP_CLCD_IRQ		{ IRQ_PB11MP_CLCD }
-#define DMAC_IRQ		{ IRQ_PB11MP_DMAC }
-#define SCTL_IRQ		{ }
-#define PB11MP_WATCHDOG_IRQ	{ IRQ_PB11MP_WATCHDOG }
-#define PB11MP_GPIO0_IRQ	{ IRQ_PB11MP_GPIO0 }
-#define GPIO1_IRQ		{ IRQ_PB11MP_GPIO1 }
-#define PB11MP_RTC_IRQ		{ IRQ_TC11MP_RTC }
-#define SCI_IRQ			{ IRQ_PB11MP_SCI }
-#define PB11MP_UART0_IRQ	{ IRQ_TC11MP_UART0 }
-#define PB11MP_UART1_IRQ	{ IRQ_TC11MP_UART1 }
-#define PB11MP_UART2_IRQ	{ IRQ_PB11MP_UART2 }
-#define PB11MP_UART3_IRQ	{ IRQ_PB11MP_UART3 }
-#define PB11MP_SSP_IRQ		{ IRQ_PB11MP_SSP }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-APB_DEVICE(uart3,	"fpga:uart3",	PB11MP_UART3,	NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,		"dev:smc",	PB11MP_SMC,	NULL);
-AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-APB_DEVICE(wdog,	"dev:wdog",	PB11MP_WATCHDOG, NULL);
-APB_DEVICE(gpio0,	"dev:gpio0",	PB11MP_GPIO0,	&gpio0_plat_data);
-APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-APB_DEVICE(rtc,		"dev:rtc",	PB11MP_RTC,	NULL);
-APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-APB_DEVICE(uart0,	"dev:uart0",	PB11MP_UART0,	NULL);
-APB_DEVICE(uart1,	"dev:uart1",	PB11MP_UART1,	NULL);
-APB_DEVICE(uart2,	"dev:uart2",	PB11MP_UART2,	NULL);
-APB_DEVICE(ssp0,	"dev:ssp0",	PB11MP_SSP,	&ssp0_plat_data);
-
-/* Primecells on the NEC ISSP chip */
-AHB_DEVICE(clcd,	"issp:clcd",	PB11MP_CLCD,	&clcd_plat_data);
-AHB_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&dmac_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&smc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * RealView PB11MPCore platform devices
- */
-static struct resource realview_pb11mp_flash_resource[] = {
-	[0] = {
-		.start		= REALVIEW_PB11MP_FLASH0_BASE,
-		.end		= REALVIEW_PB11MP_FLASH0_BASE + REALVIEW_PB11MP_FLASH0_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= REALVIEW_PB11MP_FLASH1_BASE,
-		.end		= REALVIEW_PB11MP_FLASH1_BASE + REALVIEW_PB11MP_FLASH1_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct resource realview_pb11mp_smsc911x_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PB11MP_ETH_BASE,
-		.end		= REALVIEW_PB11MP_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_TC11MP_ETH,
-		.end		= IRQ_TC11MP_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource realview_pb11mp_isp1761_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PB11MP_USB_BASE,
-		.end		= REALVIEW_PB11MP_USB_BASE + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_TC11MP_USB,
-		.end		= IRQ_TC11MP_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource pmu_resources[] = {
-	[0] = {
-		.start		= IRQ_TC11MP_PMU_CPU0,
-		.end		= IRQ_TC11MP_PMU_CPU0,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start		= IRQ_TC11MP_PMU_CPU1,
-		.end		= IRQ_TC11MP_PMU_CPU1,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start		= IRQ_TC11MP_PMU_CPU2,
-		.end		= IRQ_TC11MP_PMU_CPU2,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start		= IRQ_TC11MP_PMU_CPU3,
-		.end		= IRQ_TC11MP_PMU_CPU3,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.name			= "armv6-pmu",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(pmu_resources),
-	.resource		= pmu_resources,
-};
-
-static void __init gic_init_irq(void)
-{
-	unsigned int pldctrl;
-
-	/* new irq mode with no DCC */
-	writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
-	pldctrl = readl(__io_address(REALVIEW_SYS_BASE)	+ REALVIEW_PB11MP_SYS_PLD_CTRL1);
-	pldctrl |= 2 << 22;
-	writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_PB11MP_SYS_PLD_CTRL1);
-	writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
-
-	/* ARM11MPCore test chip GIC, primary */
-	gic_init(0, 29, __io_address(REALVIEW_TC11MP_GIC_DIST_BASE),
-		 __io_address(REALVIEW_TC11MP_GIC_CPU_BASE));
-
-	/* board GIC, secondary */
-	gic_init(1, IRQ_PB11MP_GIC_START,
-		 __io_address(REALVIEW_PB11MP_GIC_DIST_BASE),
-		 __io_address(REALVIEW_PB11MP_GIC_CPU_BASE));
-	gic_cascade_irq(1, IRQ_TC11MP_PB_IRQ1);
-}
-
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
-			      REALVIEW_TC11MP_TWD_BASE,
-			      IRQ_LOCALTIMER);
-
-static void __init realview_pb11mp_twd_init(void)
-{
-	int err = twd_local_timer_register(&twd_local_timer);
-	if (err)
-		pr_err("twd_local_timer_register failed %d\n", err);
-}
-#else
-#define realview_pb11mp_twd_init()	do {} while(0)
-#endif
-
-static void __init realview_pb11mp_timer_init(void)
-{
-	timer0_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE);
-	timer1_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE) + 0x20;
-	timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE);
-	timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20;
-
-	realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
-	realview_timer_init(IRQ_TC11MP_TIMER0_1);
-	realview_pb11mp_twd_init();
-}
-
-static void realview_pb11mp_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
-	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
-
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	__raw_writel(0x0000, reset_ctrl);
-	__raw_writel(0x0004, reset_ctrl);
-	dsb();
-}
-
-static void __init realview_pb11mp_init(void)
-{
-	int i;
-
-#ifdef CONFIG_CACHE_L2X0
-	/*
-	 * The PL220 needs to be manually configured as the hardware
-	 * doesn't report the correct sizes.
-	 * 1MB (128KB/way), 8-way associativity, event monitor and
-	 * parity enabled, ignore share bit, no force write allocate
-	 * Bits:  .... ...0 0111 1001 0000 .... .... ....
-	 */
-	l2x0_init(__io_address(REALVIEW_TC11MP_L220_BASE), 0x00790000, 0xfe000fff);
-	/*
-	 * due to a bug in the l220 cache controller, we must not call
-	 * the sync function. stub it out here instead!
-	 */
-	outer_cache.sync = NULL;
-#endif
-
-	realview_flash_register(realview_pb11mp_flash_resource,
-				ARRAY_SIZE(realview_pb11mp_flash_resource));
-	realview_eth_register(NULL, realview_pb11mp_smsc911x_resources);
-	platform_device_register(&realview_i2c_device);
-	platform_device_register(&realview_cf_device);
-	platform_device_register(&realview_leds_device);
-	realview_usb_register(realview_pb11mp_isp1761_resources);
-	platform_device_register(&pmu_device);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(realview_smp_ops),
-	.fixup		= realview_fixup,
-	.map_io		= realview_pb11mp_map_io,
-	.init_early	= realview_init_early,
-	.init_irq	= gic_init_irq,
-	.init_time	= realview_pb11mp_timer_init,
-	.init_machine	= realview_pb11mp_init,
-#ifdef CONFIG_ZONE_DMA
-	.dma_zone_size	= SZ_256M,
-#endif
-	.restart	= realview_pb11mp_restart,
-MACHINE_END