Merge tag 'renesas-boards-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

From Simon Horman:
Renesas ARM based SoC board updates for v3.14

* Global
  - Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile

* r7s72100 SoC (RZ/A1H) based Genmai Board
  - Add Multiplatform support
  - Add Reference DT

* r8a7791 (R-Car M2) based Koelsch board
  - Add pinctrl_register_mappings() for Koelsch
  - Hook up SW30-SW36 on Koelsch
  - Mark GPIO keys as wake-up sources
  - Use ->init_late()
  - Add Multiplatform support
  - Set .debounce_interval for GPIO keys
  - Add SW2 to GPIO keys
  - Add Led 6, 7 and 8 support
  - Add reference DT
  - Enable PFC/GPIO

* r8a7790 (R-Car H2) based Lager board
  - Add gpio/fixed regulator for SDHI
  - Add SPI FLASH support on QSPI
  - Mark GPIO keys as wake-up sources
  - Use ->init_late()
  - Set .debounce_interval for GPIO keys

* r8a7778 (R-Car M1) based Bock-W board
  - bockw: remove unused RSND_SSI_CLK_FROM_ADG
  - Set .debounce_interval for GPIO keys
  - Correct FPGA ioremap area
  - Use regulator for MMCIF

* r8a7740 (R-Mobile A1) based Armadillo board
  - Correct FSI address size

* sh7374 (SH-Mobile AP4) based Mackerel board
  - Use pinconf API to configure pin pull-down
  - clk_round_rate() can return a zero to indicate an error

* tag 'renesas-boards-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (75 commits)
  ARM: shmobile: lager: add gpio/fixed regulator for SDHI
  ARM: shmobile: bockw: remove unused RSND_SSI_CLK_FROM_ADG
  ARM: shmobile: armadillo: fixup FSI address size
  ARM: Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile
  ARM: shmobile: mackerel: Use pinconf API to configure pin pull-down
  ARM: shmobile: Lager:add SPI FLASH support on QSPI
  ARM: shmobile: mackerel: clk_round_rate() can return a zero to indicate an error
  ARM: shmobile: Add pinctrl_register_mappings() for Koelsch
  ARM: shmobile: Use ->init_late() on Lager
  ARM: shmobile: Hook up SW30-SW36 on Koelsch
  ARM: shmobile: koelsch: mark GPIO keys as wake-up sources
  ARM: shmobile: Use ->init_late() on Koelsch
  ARM: shmobile: lager: mark GPIO keys as wake-up sources
  ARM: shmobile: r7s72100 Genmai Multiplatform
  ARM: shmobile: r7s72100 Genmai DT reference C bits
  ARM: shmobile: r7s72100 Genmai DT reference DTS bits
  ARM: shmobile: Initial r8a7791 and Koelsch multiplatform support
  ARM: shmobile: koelsch: set .debounce_interval
  ARM: shmobile: lager: set .debounce_interval
  ARM: shmobile: bockw: add pin pull-up setting for SDHI
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 55 insertions, 15 deletions

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index a4a4b75109b2..3e57d457308a 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,6 +1,10 @@
+config ARCH_SHMOBILE
+	bool
+
 config ARCH_SHMOBILE_MULTI
-	bool "SH-Mobile Series" if ARCH_MULTI_V7
+	bool "Renesas ARM SoCs" if ARCH_MULTI_V7
 	depends on MMU
+	select ARCH_SHMOBILE
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
@@ -15,24 +19,39 @@ config ARCH_SHMOBILE_MULTI
 
 if ARCH_SHMOBILE_MULTI
 
-comment "SH-Mobile System Type"
+comment "Renesas ARM SoCs System Type"
 
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
 
-comment "SH-Mobile Board Type"
+config ARCH_R7S72100
+	bool "RZ/A1H (R7S72100)"
+
+config ARCH_R8A7791
+	bool "R-Car M2 (R8A77910)"
+	select RENESAS_IRQC
+
+comment "Renesas ARM SoCs Board Type"
+
+config MACH_GENMAI
+	bool "Genmai board"
+	depends on ARCH_R7S72100
+
+config MACH_KOELSCH
+	bool "Koelsch board"
+	depends on ARCH_R8A7791
 
 config MACH_KZM9D
 	bool "KZM9D board"
 	depends on ARCH_EMEV2
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
-comment "SH-Mobile System Configuration"
+comment "Renesas ARM SoCs System Configuration"
 endif
 
-if ARCH_SHMOBILE
+if ARCH_SHMOBILE_LEGACY
 
-comment "SH-Mobile System Type"
+comment "Renesas ARM SoCs System Type"
 
 config ARCH_SH7372
 	bool "SH-Mobile AP4 (SH7372)"
@@ -97,23 +116,28 @@ config ARCH_R8A7790
 
 config ARCH_R8A7791
 	bool "R-Car M2 (R8A77910)"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
 	select SH_CLK_CPG
+	select RENESAS_IRQC
 
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
+	select USE_OF
+	select AUTO_ZRELADDR
 
 config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
 	select SH_CLK_CPG
 
-comment "SH-Mobile Board Type"
+comment "Renesas ARM SoCs Board Type"
 
 config MACH_APE6EVM
 	bool "APE6EVM board"
@@ -190,6 +214,17 @@ config MACH_GENMAI
 	depends on ARCH_R7S72100
 	select USE_OF
 
+config MACH_GENMAI_REFERENCE
+	bool "Genmai board - Reference Device Tree Implementation"
+	depends on ARCH_R7S72100
+	select USE_OF
+	---help---
+	   Use reference implementation of Genmai board support
+	   which makes use of device tree at the expense
+	   of not supporting a number of devices.
+
+	   This is intended to aid developers
+
 config MACH_MARZEN
 	bool "MARZEN board"
 	depends on ARCH_R8A7779
@@ -231,11 +266,16 @@ config MACH_KOELSCH
 	depends on ARCH_R8A7791
 	select USE_OF
 
-config MACH_KZM9D
-	bool "KZM9D board"
-	depends on ARCH_EMEV2
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+config MACH_KOELSCH_REFERENCE
+	bool "Koelsch board - Reference Device Tree Implementation"
+	depends on ARCH_R8A7791
 	select USE_OF
+	---help---
+	   Use reference implementation of Koelsch board support
+	   which makes use of device tree at the expense
+	   of not supporting a number of devices.
+
+	   This is intended to aid developers
 
 config MACH_KZM9G
 	bool "KZM-A9-GT board"
@@ -261,7 +301,7 @@ config MACH_KZM9G_REFERENCE
 
 	   This is intended to aid developers
 
-comment "SH-Mobile System Configuration"
+comment "Renesas ARM SoCs System Configuration"
 
 config CPU_HAS_INTEVT
         bool
@@ -274,7 +314,7 @@ source "drivers/sh/Kconfig"
 
 endif
 
-if ARCH_SHMOBILE || ARCH_SHMOBILE_MULTI
+if ARCH_SHMOBILE
 
 menu "Timer and clock configuration"
 
@@ -286,8 +326,8 @@ config SHMOBILE_TIMER_HZ
 	  Allows the configuration of the timer frequency. It is customary
 	  to have the timer interrupt run at 1000 Hz or 100 Hz, but in the
 	  case of low timer frequencies other values may be more suitable.
-	  SH-Mobile systems using a 32768 Hz RCLK for clock events may want
-	  to select a HZ value such as 128 that can evenly divide RCLK.
+	  Renesas ARM SoC systems using a 32768 Hz RCLK for clock events may
+	  want to select a HZ value such as 128 that can evenly divide RCLK.
 	  A HZ value that does not divide evenly may cause timer drift.
 
 config SH_TIMER_CMT