Merge tag 'renesas-r8a7740-multiplatform-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Renesas ARM Based SoC r8a7740 Multiplatform Updates for v3.18" from Simon Horman:

* Enable multiplatform support for r8a7740 SoC and remove
  its DT-reference C board DTS files.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'renesas-r8a7740-multiplatform-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: armadillo800eva reference: Remove DTS
  ARM: shmobile: armadillo800eva reference: Remove C board code
  ARM: shmobile: r8a7740: Add restart callback
  ARM: shmobile: armadillo800eva: Build DTS for multiplatform
  ARM: shmobile: armadillo800eva: Sync DTS
  ARM: shmobile: r8a7740: Multiplatform support

7 files changed, 24 insertions, 222 deletions

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 5814754c1240..04d9cee4b6b4 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -26,6 +26,11 @@ config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
 	select SYS_SUPPORTS_SH_MTU2
 
+config ARCH_R8A7740
+	bool "R-Mobile A1 (R8A77400)"
+	select ARCH_RMOBILE
+	select RENESAS_INTC_IRQPIN
+
 config ARCH_R8A7779
 	bool "R-Car H1 (R8A77790)"
 	select RENESAS_INTC_IRQPIN
@@ -183,21 +188,6 @@ config MACH_ARMADILLO800EVA
 	select SND_SOC_WM8978 if SND_SIMPLE_CARD
 	select USE_OF
 
-config MACH_ARMADILLO800EVA_REFERENCE
-	bool "Armadillo-800 EVA board - Reference Device Tree Implementation"
-	depends on ARCH_R8A7740
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SMSC_PHY if SH_ETH
-	select SND_SOC_WM8978 if SND_SIMPLE_CARD
-	select USE_OF
-	---help---
-	   Use reference implementation of Armadillo800 EVA board support
-	   which makes greater use of device tree at the expense
-	   of not supporting a number of devices.
-
-	   This is intended to aid developers
-
 config MACH_BOCKW
 	bool "BOCK-W platform"
 	depends on ARCH_R8A7778
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 2eb2c5b02118..b5164ae436d6 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -72,7 +72,6 @@ obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= board-bockw-reference.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 obj-$(CONFIG_MACH_LAGER)	+= board-lager.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
-obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE)	+= board-armadillo800eva-reference.o
 obj-$(CONFIG_MACH_KOELSCH)	+= board-koelsch.o
 obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o
 obj-$(CONFIG_MACH_KZM9G_REFERENCE)	+= board-kzm9g-reference.o
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index a23e1555cca7..de9a23852fc8 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -3,7 +3,6 @@ loadaddr-y	:=
 loadaddr-$(CONFIG_MACH_APE6EVM) += 0x40008000
 loadaddr-$(CONFIG_MACH_APE6EVM_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
-loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
 loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
deleted file mode 100644
index f06e1f336dfb..000000000000
--- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * armadillo 800 eva board support
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include "common.h"
-#include "r8a7740.h"
-
-/*
- * CON1		Camera Module
- * CON2		Extension Bus
- * CON3		HDMI Output
- * CON4		Composite Video Output
- * CON5		H-UDI JTAG
- * CON6		ARM JTAG
- * CON7		SD1
- * CON8		SD2
- * CON9		RTC BackUp
- * CON10	Monaural Mic Input
- * CON11	Stereo Headphone Output
- * CON12	Audio Line Output(L)
- * CON13	Audio Line Output(R)
- * CON14	AWL13 Module
- * CON15	Extension
- * CON16	LCD1
- * CON17	LCD2
- * CON19	Power Input
- * CON20	USB1
- * CON21	USB2
- * CON22	Serial
- * CON23	LAN
- * CON24	USB3
- * LED1		Camera LED (Yellow)
- * LED2		Power LED (Green)
- * LED3-LED6	User LED (Yellow)
- * LED7		LAN link LED (Green)
- * LED8		LAN activity LED (Yellow)
- */
-
-/*
- * DipSwitch
- *
- *                    SW1
- *
- * -12345678-+---------------+----------------------------
- *  1        | boot          | hermit
- *  0        | boot          | OS auto boot
- * -12345678-+---------------+----------------------------
- *   00      | boot device   | eMMC
- *   10      | boot device   | SDHI0 (CON7)
- *   01      | boot device   | -
- *   11      | boot device   | Extension Buss (CS0)
- * -12345678-+---------------+----------------------------
- *     0     | Extension Bus | D8-D15 disable, eMMC enable
- *     1     | Extension Bus | D8-D15 enable,  eMMC disable
- * -12345678-+---------------+----------------------------
- *      0    | SDHI1         | COM8 disable, COM14 enable
- *      1    | SDHI1         | COM8 enable,  COM14 disable
- * -12345678-+---------------+----------------------------
- *       0   | USB0          | COM20 enable,  COM24 disable
- *       1   | USB0          | COM20 disable, COM24 enable
- * -12345678-+---------------+----------------------------
- *        00 | JTAG          | SH-X2
- *        10 | JTAG          | ARM
- *        01 | JTAG          | -
- *        11 | JTAG          | Boundary Scan
- *-----------+---------------+----------------------------
- */
-
-/*
- * FSI-WM8978
- *
- * this command is required when playback.
- *
- * # amixer set "Headphone" 50
- *
- * this command is required when capture.
- *
- * # amixer set "Input PGA" 15
- * # amixer set "Left Input Mixer MicP" on
- * # amixer set "Left Input Mixer MicN" on
- * # amixer set "Right Input Mixer MicN" on
- * # amixer set "Right Input Mixer MicP" on
- */
-
-/*
- * USB function
- *
- * When you use USB Function,
- * set SW1.6 ON, and connect cable to CN24.
- *
- * USBF needs workaround on R8A7740 chip.
- * These are a little bit complex.
- * see
- *	usbhsf_power_ctrl()
- */
-
-static void __init eva_clock_init(void)
-{
-	struct clk *system	= clk_get(NULL, "system_clk");
-	struct clk *xtal1	= clk_get(NULL, "extal1");
-	struct clk *usb24s	= clk_get(NULL, "usb24s");
-	struct clk *fsibck	= clk_get(NULL, "fsibck");
-
-	if (IS_ERR(system)	||
-	    IS_ERR(xtal1)	||
-	    IS_ERR(usb24s)	||
-	    IS_ERR(fsibck)) {
-		pr_err("armadillo800eva board clock init failed\n");
-		goto clock_error;
-	}
-
-	/* armadillo 800 eva extal1 is 24MHz */
-	clk_set_rate(xtal1, 24000000);
-
-	/* usb24s use extal1 (= system) clock (= 24MHz) */
-	clk_set_parent(usb24s, system);
-
-	/* FSIBCK is 12.288MHz, and it is parent of FSI-B */
-	clk_set_rate(fsibck, 12288000);
-
-clock_error:
-	if (!IS_ERR(system))
-		clk_put(system);
-	if (!IS_ERR(xtal1))
-		clk_put(xtal1);
-	if (!IS_ERR(usb24s))
-		clk_put(usb24s);
-	if (!IS_ERR(fsibck))
-		clk_put(fsibck);
-}
-
-/*
- * board init
- */
-static void __init eva_init(void)
-{
-	r8a7740_clock_init(MD_CK0 | MD_CK2);
-	eva_clock_init();
-
-	r8a7740_meram_workaround();
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Shared attribute override enable, 32K*8way */
-	l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff);
-#endif
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
-	r8a7740_pm_init();
-}
-
-#define RESCNT2 IOMEM(0xe6188020)
-static void eva_restart(enum reboot_mode mode, const char *cmd)
-{
-	/* Do soft power on reset */
-	writel(1 << 31, RESCNT2);
-}
-
-static const char *eva_boards_compat_dt[] __initdata = {
-	"renesas,armadillo800eva-reference",
-	NULL,
-};
-
-DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference")
-	.map_io		= r8a7740_map_io,
-	.init_early	= shmobile_init_delay,
-	.init_irq	= r8a7740_init_irq_of,
-	.init_machine	= eva_init,
-	.init_late	= shmobile_init_late,
-	.dt_compat	= eva_boards_compat_dt,
-	.restart	= eva_restart,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/pm-r8a7740.c b/arch/arm/mach-shmobile/pm-r8a7740.c
index a0d44d537fa0..4d327de35d9b 100644
--- a/arch/arm/mach-shmobile/pm-r8a7740.c
+++ b/arch/arm/mach-shmobile/pm-r8a7740.c
@@ -13,7 +13,7 @@
 #include "common.h"
 #include "pm-rmobile.h"
 
-#ifdef CONFIG_PM
+#if defined(CONFIG_PM) && !defined(CONFIG_ARCH_MULTIPLATFORM)
 static int r8a7740_pd_a4s_suspend(void)
 {
 	/*
@@ -58,8 +58,7 @@ void __init r8a7740_init_pm_domains(void)
 	rmobile_init_domains(r8a7740_pm_domains, ARRAY_SIZE(r8a7740_pm_domains));
 	pm_genpd_add_subdomain_names("A4S", "A3SP");
 }
-
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM && !CONFIG_ARCH_MULTIPLATFORM */
 
 #ifdef CONFIG_SUSPEND
 static int r8a7740_enter_suspend(suspend_state_t suspend_state)
diff --git a/arch/arm/mach-shmobile/r8a7740.h b/arch/arm/mach-shmobile/r8a7740.h
index 3352fb8650ba..f369b4b0863d 100644
--- a/arch/arm/mach-shmobile/r8a7740.h
+++ b/arch/arm/mach-shmobile/r8a7740.h
@@ -53,10 +53,10 @@ extern void r8a7740_clock_init(u8 md_ck);
 extern void r8a7740_pinmux_init(void);
 extern void r8a7740_pm_init(void);
 
-#ifdef CONFIG_PM
+#if defined(CONFIG_PM) && !defined(CONFIG_ARCH_MULTIPLATFORM)
 extern void __init r8a7740_init_pm_domains(void);
 #else
 static inline void r8a7740_init_pm_domains(void) {}
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM && !CONFIG_ARCH_MULTIPLATFORM */
 
 #endif /* __ASM_R8A7740_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 8fe270d874c2..daea3a344121 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -36,6 +36,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
+#include <asm/hardware/cache-l2x0.h>
 
 #include "common.h"
 #include "dma-register.h"
@@ -813,10 +814,22 @@ void __init r8a7740_init_irq_of(void)
 
 static void __init r8a7740_generic_init(void)
 {
-	r8a7740_clock_init(0);
+	r8a7740_meram_workaround();
+
+#ifdef CONFIG_CACHE_L2X0
+	/* Shared attribute override enable, 32K*8way */
+	l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff);
+#endif
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
+#define RESCNT2 IOMEM(0xe6188020)
+static void r8a7740_restart(enum reboot_mode mode, const char *cmd)
+{
+	/* Do soft power on reset */
+	writel(1 << 31, RESCNT2);
+}
+
 static const char *r8a7740_boards_compat_dt[] __initdata = {
 	"renesas,r8a7740",
 	NULL,
@@ -829,6 +842,7 @@ DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
 	.init_machine	= r8a7740_generic_init,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= r8a7740_boards_compat_dt,
+	.restart	= r8a7740_restart,
 MACHINE_END
 
 #endif /* CONFIG_USE_OF */