Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver specific changes from Arnd Bergmann:

 - Updates to the ux500 cpufreq code

 - Moving the u300 DMA controller driver to drivers/dma

 - Moving versatile express drivers out of arch/arm for sharing with arch/arm64

 - Device tree bindings for the OMAP General Purpose Memory Controller

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
  ARM: OMAP2+: gpmc: Add device tree documentation for elm handle
  ARM: OMAP2+: gpmc: add DT bindings for OneNAND
  ARM: OMAP2+: gpmc-onenand: drop __init annotation
  mtd: omap-onenand: pass device_node in platform data
  ARM: OMAP2+: Prevent potential crash if GPMC probe fails
  ARM: OMAP2+: gpmc: Remove unneeded of_node_put()
  arm: Move sp810.h to include/linux/amba/
  ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
  ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs
  ARM: OMAP: gpmc-nand: drop __init annotation
  mtd: omap-nand: pass device_node in platform data
  ARM: OMAP: gpmc: don't create devices from initcall on DT
  dma: coh901318: cut down on platform data abstraction
  dma: coh901318: merge header files
  dma: coh901318: push definitions into driver
  dma: coh901318: push header down into the DMA subsystem
  dma: coh901318: skip hard-coded addresses
  dma: coh901318: remove hardcoded target addresses
  dma: coh901318: push platform data into driver
  dma: coh901318: create a proper platform data file
  ...

1 files changed, 0 insertions, 267 deletions

diff --git a/arch/arm/mach-u300/include/mach/coh901318.h b/arch/arm/mach-u300/include/mach/coh901318.h
deleted file mode 100644
index 7c3b2b2d25b6..000000000000
--- a/arch/arm/mach-u300/include/mach/coh901318.h
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- *
- * include/linux/coh901318.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * DMA driver for COH 901 318
- * Author: Per Friden <per.friden@stericsson.com>
- */
-
-#ifndef COH901318_H
-#define COH901318_H
-
-#include <linux/device.h>
-#include <linux/dmaengine.h>
-
-#define MAX_DMA_PACKET_SIZE_SHIFT 11
-#define MAX_DMA_PACKET_SIZE (1 << MAX_DMA_PACKET_SIZE_SHIFT)
-
-/**
- * struct coh901318_lli - linked list item for DMAC
- * @control: control settings for DMAC
- * @src_addr: transfer source address
- * @dst_addr: transfer destination address
- * @link_addr:  physical address to next lli
- * @virt_link_addr: virtual address of next lli (only used by pool_free)
- * @phy_this: physical address of current lli (only used by pool_free)
- */
-struct coh901318_lli {
-	u32 control;
-	dma_addr_t src_addr;
-	dma_addr_t dst_addr;
-	dma_addr_t link_addr;
-
-	void *virt_link_addr;
-	dma_addr_t phy_this;
-};
-/**
- * struct coh901318_params - parameters for DMAC configuration
- * @config: DMA config register
- * @ctrl_lli_last: DMA control register for the last lli in the list
- * @ctrl_lli: DMA control register for an lli
- * @ctrl_lli_chained: DMA control register for a chained lli
- */
-struct coh901318_params {
-	u32 config;
-	u32 ctrl_lli_last;
-	u32 ctrl_lli;
-	u32 ctrl_lli_chained;
-};
-/**
- * struct coh_dma_channel - dma channel base
- * @name: ascii name of dma channel
- * @number: channel id number
- * @desc_nbr_max: number of preallocated descriptors
- * @priority_high: prio of channel, 0 low otherwise high.
- * @param: configuration parameters
- * @dev_addr: physical address of periphal connected to channel
- */
-struct coh_dma_channel {
-	const char name[32];
-	const int number;
-	const int desc_nbr_max;
-	const int priority_high;
-	const struct coh901318_params param;
-	const dma_addr_t dev_addr;
-};
-
-/**
- * dma_access_memory_state_t - register dma for memory access
- *
- * @dev: The dma device
- * @active:  1 means dma intends to access memory
- *           0 means dma wont access memory
- */
-typedef void (*dma_access_memory_state_t)(struct device *dev,
-					  bool active);
-
-/**
- * struct powersave - DMA power save structure
- * @lock: lock protecting data in this struct
- * @started_channels: bit mask indicating active dma channels
- */
-struct powersave {
-	spinlock_t lock;
-	u64 started_channels;
-};
-/**
- * struct coh901318_platform - platform arch structure
- * @chans_slave: specifying dma slave channels
- * @chans_memcpy: specifying dma memcpy channels
- * @access_memory_state: requesting DMA memory access (on / off)
- * @chan_conf: dma channel configurations
- * @max_channels: max number of dma chanenls
- */
-struct coh901318_platform {
-	const int *chans_slave;
-	const int *chans_memcpy;
-	const dma_access_memory_state_t access_memory_state;
-	const struct coh_dma_channel *chan_conf;
-	const int max_channels;
-};
-
-#ifdef CONFIG_COH901318
-/**
- * coh901318_filter_id() - DMA channel filter function
- * @chan: dma channel handle
- * @chan_id: id of dma channel to be filter out
- *
- * In dma_request_channel() it specifies what channel id to be requested
- */
-bool coh901318_filter_id(struct dma_chan *chan, void *chan_id);
-#else
-static inline bool coh901318_filter_id(struct dma_chan *chan, void *chan_id)
-{
-	return false;
-}
-#endif
-
-/*
- * DMA Controller - this access the static mappings of the coh901318 dma.
- *
- */
-
-#define COH901318_MOD32_MASK					(0x1F)
-#define COH901318_WORD_MASK					(0xFFFFFFFF)
-/* INT_STATUS - Interrupt Status Registers 32bit (R/-) */
-#define COH901318_INT_STATUS1					(0x0000)
-#define COH901318_INT_STATUS2					(0x0004)
-/* TC_INT_STATUS - Terminal Count Interrupt Status Registers 32bit (R/-) */
-#define COH901318_TC_INT_STATUS1				(0x0008)
-#define COH901318_TC_INT_STATUS2				(0x000C)
-/* TC_INT_CLEAR - Terminal Count Interrupt Clear Registers 32bit (-/W) */
-#define COH901318_TC_INT_CLEAR1					(0x0010)
-#define COH901318_TC_INT_CLEAR2					(0x0014)
-/* RAW_TC_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
-#define COH901318_RAW_TC_INT_STATUS1				(0x0018)
-#define COH901318_RAW_TC_INT_STATUS2				(0x001C)
-/* BE_INT_STATUS - Bus Error Interrupt Status Registers 32bit (R/-) */
-#define COH901318_BE_INT_STATUS1				(0x0020)
-#define COH901318_BE_INT_STATUS2				(0x0024)
-/* BE_INT_CLEAR - Bus Error Interrupt Clear Registers 32bit (-/W) */
-#define COH901318_BE_INT_CLEAR1					(0x0028)
-#define COH901318_BE_INT_CLEAR2					(0x002C)
-/* RAW_BE_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
-#define COH901318_RAW_BE_INT_STATUS1				(0x0030)
-#define COH901318_RAW_BE_INT_STATUS2				(0x0034)
-
-/*
- * CX_CFG - Channel Configuration Registers 32bit (R/W)
- */
-#define COH901318_CX_CFG					(0x0100)
-#define COH901318_CX_CFG_SPACING				(0x04)
-/* Channel enable activates tha dma job */
-#define COH901318_CX_CFG_CH_ENABLE				(0x00000001)
-#define COH901318_CX_CFG_CH_DISABLE				(0x00000000)
-/* Request Mode */
-#define COH901318_CX_CFG_RM_MASK				(0x00000006)
-#define COH901318_CX_CFG_RM_MEMORY_TO_MEMORY			(0x0 << 1)
-#define COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY			(0x1 << 1)
-#define COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY			(0x1 << 1)
-#define COH901318_CX_CFG_RM_PRIMARY_TO_SECONDARY		(0x3 << 1)
-#define COH901318_CX_CFG_RM_SECONDARY_TO_PRIMARY		(0x3 << 1)
-/* Linked channel request field. RM must == 11 */
-#define COH901318_CX_CFG_LCRF_SHIFT				3
-#define COH901318_CX_CFG_LCRF_MASK				(0x000001F8)
-#define COH901318_CX_CFG_LCR_DISABLE				(0x00000000)
-/* Terminal Counter Interrupt Request Mask */
-#define COH901318_CX_CFG_TC_IRQ_ENABLE				(0x00000200)
-#define COH901318_CX_CFG_TC_IRQ_DISABLE				(0x00000000)
-/* Bus Error interrupt Mask */
-#define COH901318_CX_CFG_BE_IRQ_ENABLE				(0x00000400)
-#define COH901318_CX_CFG_BE_IRQ_DISABLE				(0x00000000)
-
-/*
- * CX_STAT - Channel Status Registers 32bit (R/-)
- */
-#define COH901318_CX_STAT					(0x0200)
-#define COH901318_CX_STAT_SPACING				(0x04)
-#define COH901318_CX_STAT_RBE_IRQ_IND				(0x00000008)
-#define COH901318_CX_STAT_RTC_IRQ_IND				(0x00000004)
-#define COH901318_CX_STAT_ACTIVE				(0x00000002)
-#define COH901318_CX_STAT_ENABLED				(0x00000001)
-
-/*
- * CX_CTRL - Channel Control Registers 32bit (R/W)
- */
-#define COH901318_CX_CTRL					(0x0400)
-#define COH901318_CX_CTRL_SPACING				(0x10)
-/* Transfer Count Enable */
-#define COH901318_CX_CTRL_TC_ENABLE				(0x00001000)
-#define COH901318_CX_CTRL_TC_DISABLE				(0x00000000)
-/* Transfer Count Value 0 - 4095 */
-#define COH901318_CX_CTRL_TC_VALUE_MASK				(0x00000FFF)
-/* Burst count */
-#define COH901318_CX_CTRL_BURST_COUNT_MASK			(0x0000E000)
-#define COH901318_CX_CTRL_BURST_COUNT_64_BYTES			(0x7 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_48_BYTES			(0x6 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_32_BYTES			(0x5 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_16_BYTES			(0x4 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_8_BYTES			(0x3 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_4_BYTES			(0x2 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_2_BYTES			(0x1 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_1_BYTE			(0x0 << 13)
-/* Source bus size  */
-#define COH901318_CX_CTRL_SRC_BUS_SIZE_MASK			(0x00030000)
-#define COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS			(0x2 << 16)
-#define COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS			(0x1 << 16)
-#define COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS			(0x0 << 16)
-/* Source address increment */
-#define COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE			(0x00040000)
-#define COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE			(0x00000000)
-/* Destination Bus Size */
-#define COH901318_CX_CTRL_DST_BUS_SIZE_MASK			(0x00180000)
-#define COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS			(0x2 << 19)
-#define COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS			(0x1 << 19)
-#define COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS			(0x0 << 19)
-/* Destination address increment */
-#define COH901318_CX_CTRL_DST_ADDR_INC_ENABLE			(0x00200000)
-#define COH901318_CX_CTRL_DST_ADDR_INC_DISABLE			(0x00000000)
-/* Master Mode (Master2 is only connected to MSL) */
-#define COH901318_CX_CTRL_MASTER_MODE_MASK			(0x00C00000)
-#define COH901318_CX_CTRL_MASTER_MODE_M2R_M1W			(0x3 << 22)
-#define COH901318_CX_CTRL_MASTER_MODE_M1R_M2W			(0x2 << 22)
-#define COH901318_CX_CTRL_MASTER_MODE_M2RW			(0x1 << 22)
-#define COH901318_CX_CTRL_MASTER_MODE_M1RW			(0x0 << 22)
-/* Terminal Count flag to PER enable */
-#define COH901318_CX_CTRL_TCP_ENABLE				(0x01000000)
-#define COH901318_CX_CTRL_TCP_DISABLE				(0x00000000)
-/* Terminal Count flags to CPU enable */
-#define COH901318_CX_CTRL_TC_IRQ_ENABLE				(0x02000000)
-#define COH901318_CX_CTRL_TC_IRQ_DISABLE			(0x00000000)
-/* Hand shake to peripheral */
-#define COH901318_CX_CTRL_HSP_ENABLE				(0x04000000)
-#define COH901318_CX_CTRL_HSP_DISABLE				(0x00000000)
-#define COH901318_CX_CTRL_HSS_ENABLE				(0x08000000)
-#define COH901318_CX_CTRL_HSS_DISABLE				(0x00000000)
-/* DMA mode */
-#define COH901318_CX_CTRL_DDMA_MASK				(0x30000000)
-#define COH901318_CX_CTRL_DDMA_LEGACY				(0x0 << 28)
-#define COH901318_CX_CTRL_DDMA_DEMAND_DMA1			(0x1 << 28)
-#define COH901318_CX_CTRL_DDMA_DEMAND_DMA2			(0x2 << 28)
-/* Primary Request Data Destination */
-#define COH901318_CX_CTRL_PRDD_MASK				(0x40000000)
-#define COH901318_CX_CTRL_PRDD_DEST				(0x1 << 30)
-#define COH901318_CX_CTRL_PRDD_SOURCE				(0x0 << 30)
-
-/*
- * CX_SRC_ADDR - Channel Source Address Registers 32bit (R/W)
- */
-#define COH901318_CX_SRC_ADDR					(0x0404)
-#define COH901318_CX_SRC_ADDR_SPACING				(0x10)
-
-/*
- * CX_DST_ADDR - Channel Destination Address Registers 32bit R/W
- */
-#define COH901318_CX_DST_ADDR					(0x0408)
-#define COH901318_CX_DST_ADDR_SPACING				(0x10)
-
-/*
- * CX_LNK_ADDR - Channel Link Address Registers 32bit (R/W)
- */
-#define COH901318_CX_LNK_ADDR					(0x040C)
-#define COH901318_CX_LNK_ADDR_SPACING				(0x10)
-#define COH901318_CX_LNK_LINK_IMMEDIATE				(0x00000001)
-#endif /* COH901318_H */