ARM: u300: localize <mach/u300-regs.h>

This register base file is now only used in the machine
itself so move it down into mach-u300.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 0 insertions, 165 deletions

diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
deleted file mode 100644
index 0320495efc4d..000000000000
--- a/arch/arm/mach-u300/include/mach/u300-regs.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/u300-regs.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Basic register address definitions in physical memory and
- * some block definitions for core devices like the timer.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __MACH_U300_REGS_H
-#define __MACH_U300_REGS_H
-
-/*
- * These are the large blocks of memory allocated for I/O.
- * the defines are used for setting up the I/O memory mapping.
- */
-
-/* NAND Flash CS0 */
-#define U300_NAND_CS0_PHYS_BASE		0x80000000
-
-/* NFIF */
-#define U300_NAND_IF_PHYS_BASE		0x9f800000
-
-/* ALE, CLE offset for FSMC NAND */
-#define PLAT_NAND_CLE			(1 << 16)
-#define PLAT_NAND_ALE			(1 << 17)
-
-/* AHB Peripherals */
-#define U300_AHB_PER_PHYS_BASE		0xa0000000
-#define U300_AHB_PER_VIRT_BASE		0xff010000
-
-/* FAST Peripherals */
-#define U300_FAST_PER_PHYS_BASE		0xc0000000
-#define U300_FAST_PER_VIRT_BASE		0xff020000
-
-/* SLOW Peripherals */
-#define U300_SLOW_PER_PHYS_BASE		0xc0010000
-#define U300_SLOW_PER_VIRT_BASE		0xff000000
-
-/* Boot ROM */
-#define U300_BOOTROM_PHYS_BASE		0xffff0000
-#define U300_BOOTROM_VIRT_BASE		0xffff0000
-
-/* SEMI config base */
-#define U300_SEMI_CONFIG_BASE		0x2FFE0000
-
-/*
- * AHB peripherals
- */
-
-/* AHB Peripherals Bridge Controller */
-#define U300_AHB_BRIDGE_BASE		(U300_AHB_PER_PHYS_BASE+0x0000)
-
-/* Vectored Interrupt Controller 0, servicing 32 interrupts */
-#define U300_INTCON0_BASE		(U300_AHB_PER_PHYS_BASE+0x1000)
-#define U300_INTCON0_VBASE		IOMEM(U300_AHB_PER_VIRT_BASE+0x1000)
-
-/* Vectored Interrupt Controller 1, servicing 32 interrupts */
-#define U300_INTCON1_BASE		(U300_AHB_PER_PHYS_BASE+0x2000)
-#define U300_INTCON1_VBASE		IOMEM(U300_AHB_PER_VIRT_BASE+0x2000)
-
-/* Memory Stick Pro (MSPRO) controller */
-#define U300_MSPRO_BASE			(U300_AHB_PER_PHYS_BASE+0x3000)
-
-/* EMIF Configuration Area */
-#define U300_EMIF_CFG_BASE		(U300_AHB_PER_PHYS_BASE+0x4000)
-
-
-/*
- * FAST peripherals
- */
-
-/* FAST bridge control */
-#define U300_FAST_BRIDGE_BASE		(U300_FAST_PER_PHYS_BASE+0x0000)
-
-/* MMC/SD controller */
-#define U300_MMCSD_BASE			(U300_FAST_PER_PHYS_BASE+0x1000)
-
-/* PCM I2S0 controller */
-#define U300_PCM_I2S0_BASE		(U300_FAST_PER_PHYS_BASE+0x2000)
-
-/* PCM I2S1 controller */
-#define U300_PCM_I2S1_BASE		(U300_FAST_PER_PHYS_BASE+0x3000)
-
-/* I2C0 controller */
-#define U300_I2C0_BASE			(U300_FAST_PER_PHYS_BASE+0x4000)
-
-/* I2C1 controller */
-#define U300_I2C1_BASE			(U300_FAST_PER_PHYS_BASE+0x5000)
-
-/* SPI controller */
-#define U300_SPI_BASE			(U300_FAST_PER_PHYS_BASE+0x6000)
-
-/* Fast UART1 on U335 only */
-#define U300_UART1_BASE			(U300_FAST_PER_PHYS_BASE+0x7000)
-
-/*
- * SLOW peripherals
- */
-
-/* SLOW bridge control */
-#define U300_SLOW_BRIDGE_BASE		(U300_SLOW_PER_PHYS_BASE)
-
-/* SYSCON */
-#define U300_SYSCON_BASE		(U300_SLOW_PER_PHYS_BASE+0x1000)
-#define U300_SYSCON_VBASE		IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000)
-
-/* Watchdog */
-#define U300_WDOG_BASE			(U300_SLOW_PER_PHYS_BASE+0x2000)
-
-/* UART0 */
-#define U300_UART0_BASE			(U300_SLOW_PER_PHYS_BASE+0x3000)
-
-/* APP side special timer */
-#define U300_TIMER_APP_BASE		(U300_SLOW_PER_PHYS_BASE+0x4000)
-#define U300_TIMER_APP_VBASE		IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000)
-
-/* Keypad */
-#define U300_KEYPAD_BASE		(U300_SLOW_PER_PHYS_BASE+0x5000)
-
-/* GPIO */
-#define U300_GPIO_BASE			(U300_SLOW_PER_PHYS_BASE+0x6000)
-
-/* RTC */
-#define U300_RTC_BASE			(U300_SLOW_PER_PHYS_BASE+0x7000)
-
-/* Bus tracer */
-#define U300_BUSTR_BASE			(U300_SLOW_PER_PHYS_BASE+0x8000)
-
-/* Event handler (hardware queue) */
-#define U300_EVHIST_BASE		(U300_SLOW_PER_PHYS_BASE+0x9000)
-
-/* Genric Timer */
-#define U300_TIMER_BASE			(U300_SLOW_PER_PHYS_BASE+0xa000)
-
-/* PPM */
-#define U300_PPM_BASE			(U300_SLOW_PER_PHYS_BASE+0xb000)
-
-
-/*
- * REST peripherals
- */
-
-/* ISP (image signal processor) */
-#define U300_ISP_BASE			(0xA0008000)
-
-/* DMA Controller base */
-#define U300_DMAC_BASE			(0xC0020000)
-
-/* MSL Base */
-#define U300_MSL_BASE			(0xc0022000)
-
-/* APEX Base */
-#define U300_APEX_BASE			(0xc0030000)
-
-/* Video Encoder Base */
-#define U300_VIDEOENC_BASE		(0xc0080000)
-
-/* XGAM Base */
-#define U300_XGAM_BASE			(0xd0000000)
-
-#endif