ARM: OMAP1: Move SoC specific headers from plat to mach for omap1

There's no need to have these in plat-omap any longer. Note that these
could eventually be made local to mach-omap1 instead of being in mach.

But to do that, at least various driver access using omap7xxx.h registers
needs to be fixed first.

Cc: spi-devel-general@lists.sourceforge.net
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Tony Lindgren <tony@atomide.com>

3 files changed, 0 insertions, 359 deletions

diff --git a/arch/arm/plat-omap/include/plat/omap1510.h b/arch/arm/plat-omap/include/plat/omap1510.h
deleted file mode 100644
index d24004668138..000000000000
--- a/arch/arm/plat-omap/include/plat/omap1510.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* arch/arm/plat-omap/include/mach/omap1510.h
- *
- * Hardware definitions for TI OMAP1510 processor.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP15XX_H
-#define __ASM_ARCH_OMAP15XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP1510_DSP_BASE	0xE0000000
-#define OMAP1510_DSP_SIZE	0x28000
-#define OMAP1510_DSP_START	0xE0000000
-
-#define OMAP1510_DSPREG_BASE	0xE1000000
-#define OMAP1510_DSPREG_SIZE	SZ_128K
-#define OMAP1510_DSPREG_START	0xE1000000
-
-#define OMAP1510_DSP_MMU_BASE	(0xfffed200)
-
-#endif /*  __ASM_ARCH_OMAP15XX_H */
-
diff --git a/arch/arm/plat-omap/include/plat/omap16xx.h b/arch/arm/plat-omap/include/plat/omap16xx.h
deleted file mode 100644
index e69e1d857b45..000000000000
--- a/arch/arm/plat-omap/include/plat/omap16xx.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/* arch/arm/plat-omap/include/mach/omap16xx.h
- *
- * Hardware definitions for TI OMAP1610/5912/1710 processors.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP16XX_H
-#define __ASM_ARCH_OMAP16XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP16XX_DSP_BASE	0xE0000000
-#define OMAP16XX_DSP_SIZE	0x28000
-#define OMAP16XX_DSP_START	0xE0000000
-
-#define OMAP16XX_DSPREG_BASE	0xE1000000
-#define OMAP16XX_DSPREG_SIZE	SZ_128K
-#define OMAP16XX_DSPREG_START	0xE1000000
-
-#define OMAP16XX_SEC_BASE	0xFFFE4000
-#define OMAP16XX_SEC_DES	(OMAP16XX_SEC_BASE + 0x0000)
-#define OMAP16XX_SEC_SHA1MD5	(OMAP16XX_SEC_BASE + 0x0800)
-#define OMAP16XX_SEC_RNG	(OMAP16XX_SEC_BASE + 0x1000)
-
-/*
- * ---------------------------------------------------------------------------
- * Interrupts
- * ---------------------------------------------------------------------------
- */
-#define OMAP_IH2_0_BASE		(0xfffe0000)
-#define OMAP_IH2_1_BASE		(0xfffe0100)
-#define OMAP_IH2_2_BASE		(0xfffe0200)
-#define OMAP_IH2_3_BASE		(0xfffe0300)
-
-#define OMAP_IH2_0_ITR		(OMAP_IH2_0_BASE + 0x00)
-#define OMAP_IH2_0_MIR		(OMAP_IH2_0_BASE + 0x04)
-#define OMAP_IH2_0_SIR_IRQ	(OMAP_IH2_0_BASE + 0x10)
-#define OMAP_IH2_0_SIR_FIQ	(OMAP_IH2_0_BASE + 0x14)
-#define OMAP_IH2_0_CONTROL	(OMAP_IH2_0_BASE + 0x18)
-#define OMAP_IH2_0_ILR0		(OMAP_IH2_0_BASE + 0x1c)
-#define OMAP_IH2_0_ISR		(OMAP_IH2_0_BASE + 0x9c)
-
-#define OMAP_IH2_1_ITR		(OMAP_IH2_1_BASE + 0x00)
-#define OMAP_IH2_1_MIR		(OMAP_IH2_1_BASE + 0x04)
-#define OMAP_IH2_1_SIR_IRQ	(OMAP_IH2_1_BASE + 0x10)
-#define OMAP_IH2_1_SIR_FIQ	(OMAP_IH2_1_BASE + 0x14)
-#define OMAP_IH2_1_CONTROL	(OMAP_IH2_1_BASE + 0x18)
-#define OMAP_IH2_1_ILR1		(OMAP_IH2_1_BASE + 0x1c)
-#define OMAP_IH2_1_ISR		(OMAP_IH2_1_BASE + 0x9c)
-
-#define OMAP_IH2_2_ITR		(OMAP_IH2_2_BASE + 0x00)
-#define OMAP_IH2_2_MIR		(OMAP_IH2_2_BASE + 0x04)
-#define OMAP_IH2_2_SIR_IRQ	(OMAP_IH2_2_BASE + 0x10)
-#define OMAP_IH2_2_SIR_FIQ	(OMAP_IH2_2_BASE + 0x14)
-#define OMAP_IH2_2_CONTROL	(OMAP_IH2_2_BASE + 0x18)
-#define OMAP_IH2_2_ILR2		(OMAP_IH2_2_BASE + 0x1c)
-#define OMAP_IH2_2_ISR		(OMAP_IH2_2_BASE + 0x9c)
-
-#define OMAP_IH2_3_ITR		(OMAP_IH2_3_BASE + 0x00)
-#define OMAP_IH2_3_MIR		(OMAP_IH2_3_BASE + 0x04)
-#define OMAP_IH2_3_SIR_IRQ	(OMAP_IH2_3_BASE + 0x10)
-#define OMAP_IH2_3_SIR_FIQ	(OMAP_IH2_3_BASE + 0x14)
-#define OMAP_IH2_3_CONTROL	(OMAP_IH2_3_BASE + 0x18)
-#define OMAP_IH2_3_ILR3		(OMAP_IH2_3_BASE + 0x1c)
-#define OMAP_IH2_3_ISR		(OMAP_IH2_3_BASE + 0x9c)
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define OMAP16XX_ARM_IDLECT3	(CLKGEN_REG_BASE + 0x24)
-
-/*
- * ----------------------------------------------------------------------------
- * Pin configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV6	(1 << 8)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV7	(1 << 9)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV8	(1 << 10)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV9	(1 << 11)
-#define OMAP16XX_SUBLVDS_CONF_VALID	(1 << 13)
-
-/*
- * ----------------------------------------------------------------------------
- * System control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP1610_RESET_CONTROL  0xfffe1140
-
-/*
- * ---------------------------------------------------------------------------
- * TIPB bus interface
- * ---------------------------------------------------------------------------
- */
-#define TIPB_SWITCH_BASE		 (0xfffbc800)
-#define OMAP16XX_MMCSD2_SSW_MPU_CONF	(TIPB_SWITCH_BASE + 0x160)
-
-/* UART3 Registers Mapping through MPU bus */
-#define UART3_RHR               (OMAP1_UART3_BASE + 0)
-#define UART3_THR               (OMAP1_UART3_BASE + 0)
-#define UART3_DLL               (OMAP1_UART3_BASE + 0)
-#define UART3_IER               (OMAP1_UART3_BASE + 4)
-#define UART3_DLH               (OMAP1_UART3_BASE + 4)
-#define UART3_IIR               (OMAP1_UART3_BASE + 8)
-#define UART3_FCR               (OMAP1_UART3_BASE + 8)
-#define UART3_EFR               (OMAP1_UART3_BASE + 8)
-#define UART3_LCR               (OMAP1_UART3_BASE + 0x0C)
-#define UART3_MCR               (OMAP1_UART3_BASE + 0x10)
-#define UART3_XON1_ADDR1        (OMAP1_UART3_BASE + 0x10)
-#define UART3_XON2_ADDR2        (OMAP1_UART3_BASE + 0x14)
-#define UART3_LSR               (OMAP1_UART3_BASE + 0x14)
-#define UART3_TCR               (OMAP1_UART3_BASE + 0x18)
-#define UART3_MSR               (OMAP1_UART3_BASE + 0x18)
-#define UART3_XOFF1             (OMAP1_UART3_BASE + 0x18)
-#define UART3_XOFF2             (OMAP1_UART3_BASE + 0x1C)
-#define UART3_SPR               (OMAP1_UART3_BASE + 0x1C)
-#define UART3_TLR               (OMAP1_UART3_BASE + 0x1C)
-#define UART3_MDR1              (OMAP1_UART3_BASE + 0x20)
-#define UART3_MDR2              (OMAP1_UART3_BASE + 0x24)
-#define UART3_SFLSR             (OMAP1_UART3_BASE + 0x28)
-#define UART3_TXFLL             (OMAP1_UART3_BASE + 0x28)
-#define UART3_RESUME            (OMAP1_UART3_BASE + 0x2C)
-#define UART3_TXFLH             (OMAP1_UART3_BASE + 0x2C)
-#define UART3_SFREGL            (OMAP1_UART3_BASE + 0x30)
-#define UART3_RXFLL             (OMAP1_UART3_BASE + 0x30)
-#define UART3_SFREGH            (OMAP1_UART3_BASE + 0x34)
-#define UART3_RXFLH             (OMAP1_UART3_BASE + 0x34)
-#define UART3_BLR               (OMAP1_UART3_BASE + 0x38)
-#define UART3_ACREG             (OMAP1_UART3_BASE + 0x3C)
-#define UART3_DIV16             (OMAP1_UART3_BASE + 0x3C)
-#define UART3_SCR               (OMAP1_UART3_BASE + 0x40)
-#define UART3_SSR               (OMAP1_UART3_BASE + 0x44)
-#define UART3_EBLR              (OMAP1_UART3_BASE + 0x48)
-#define UART3_OSC_12M_SEL       (OMAP1_UART3_BASE + 0x4C)
-#define UART3_MVR               (OMAP1_UART3_BASE + 0x50)
-
-/*
- * ---------------------------------------------------------------------------
- * Watchdog timer
- * ---------------------------------------------------------------------------
- */
-
-/* 32-bit Watchdog timer in OMAP 16XX */
-#define OMAP_16XX_WATCHDOG_BASE        (0xfffeb000)
-#define OMAP_16XX_WIDR         (OMAP_16XX_WATCHDOG_BASE + 0x00)
-#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
-#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
-#define OMAP_16XX_WCLR         (OMAP_16XX_WATCHDOG_BASE + 0x24)
-#define OMAP_16XX_WCRR         (OMAP_16XX_WATCHDOG_BASE + 0x28)
-#define OMAP_16XX_WLDR         (OMAP_16XX_WATCHDOG_BASE + 0x2c)
-#define OMAP_16XX_WTGR         (OMAP_16XX_WATCHDOG_BASE + 0x30)
-#define OMAP_16XX_WWPS         (OMAP_16XX_WATCHDOG_BASE + 0x34)
-#define OMAP_16XX_WSPR         (OMAP_16XX_WATCHDOG_BASE + 0x48)
-
-#define WCLR_PRE_SHIFT         5
-#define WCLR_PTV_SHIFT         2
-
-#define WWPS_W_PEND_WSPR       (1 << 4)
-#define WWPS_W_PEND_WTGR       (1 << 3)
-#define WWPS_W_PEND_WLDR       (1 << 2)
-#define WWPS_W_PEND_WCRR       (1 << 1)
-#define WWPS_W_PEND_WCLR       (1 << 0)
-
-#define WSPR_ENABLE_0          (0x0000bbbb)
-#define WSPR_ENABLE_1          (0x00004444)
-#define WSPR_DISABLE_0         (0x0000aaaa)
-#define WSPR_DISABLE_1         (0x00005555)
-
-#define OMAP16XX_DSP_MMU_BASE	(0xfffed200)
-#define OMAP16XX_MAILBOX_BASE	(0xfffcf000)
-
-#endif /*  __ASM_ARCH_OMAP16XX_H */
-
diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/plat-omap/include/plat/omap7xx.h
deleted file mode 100644
index 48e4757e1e30..000000000000
--- a/arch/arm/plat-omap/include/plat/omap7xx.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* arch/arm/plat-omap/include/mach/omap7xx.h
- *
- * Hardware definitions for TI OMAP7XX processor.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net>
- * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP7XX_H
-#define __ASM_ARCH_OMAP7XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP7XX_DSP_BASE	0xE0000000
-#define OMAP7XX_DSP_SIZE	0x50000
-#define OMAP7XX_DSP_START	0xE0000000
-
-#define OMAP7XX_DSPREG_BASE	0xE1000000
-#define OMAP7XX_DSPREG_SIZE	SZ_128K
-#define OMAP7XX_DSPREG_START	0xE1000000
-
-#define OMAP7XX_SPI1_BASE	0xfffc0800
-#define OMAP7XX_SPI2_BASE	0xfffc1000
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX specific configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_CONFIG_BASE	0xfffe1000
-#define OMAP7XX_IO_CONF_0	0xfffe1070
-#define OMAP7XX_IO_CONF_1	0xfffe1074
-#define OMAP7XX_IO_CONF_2	0xfffe1078
-#define OMAP7XX_IO_CONF_3	0xfffe107c
-#define OMAP7XX_IO_CONF_4	0xfffe1080
-#define OMAP7XX_IO_CONF_5	0xfffe1084
-#define OMAP7XX_IO_CONF_6	0xfffe1088
-#define OMAP7XX_IO_CONF_7	0xfffe108c
-#define OMAP7XX_IO_CONF_8	0xfffe1090
-#define OMAP7XX_IO_CONF_9	0xfffe1094
-#define OMAP7XX_IO_CONF_10	0xfffe1098
-#define OMAP7XX_IO_CONF_11	0xfffe109c
-#define OMAP7XX_IO_CONF_12	0xfffe10a0
-#define OMAP7XX_IO_CONF_13	0xfffe10a4
-
-#define OMAP7XX_MODE_1		0xfffe1010
-#define OMAP7XX_MODE_2		0xfffe1014
-
-/* CSMI specials: in terms of base + offset */
-#define OMAP7XX_MODE2_OFFSET	0x14
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX traffic controller configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_FLASH_CFG_0	0xfffecc10
-#define OMAP7XX_FLASH_ACFG_0	0xfffecc50
-#define OMAP7XX_FLASH_CFG_1	0xfffecc14
-#define OMAP7XX_FLASH_ACFG_1	0xfffecc54
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX DSP control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_ICR_BASE	0xfffbb800
-#define OMAP7XX_DSP_M_CTL	0xfffbb804
-#define OMAP7XX_DSP_MMU_BASE	0xfffed200
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX PCC_UPLD configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_PCC_UPLD_CTRL_BASE	(0xfffe0900)
-#define OMAP7XX_PCC_UPLD_CTRL		(OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00)
-
-#endif /*  __ASM_ARCH_OMAP7XX_H */
-