Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (113 commits)
  omap4: Add support for i2c init
  omap: Fix i2c platform init code for omap4
  OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y
  OMAP powerdomain, hwmod, omap_device: add some credits
  OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains
  OMAP3 clock: add support for setting the divider for sys_clkout2 using clk_set_rate
  OMAP4 powerdomain: Fix pwrsts flags for ALWAYS ON domains
  OMAP: timers: Fix clock source names for OMAP4
  OMAP4 clock: Support clk_set_parent
  OMAP4: PRCM: Add offset defines for all CM registers
  OMAP4: PRCM: Add offset defines for all PRM registers
  OMAP4: PRCM: Remove duplicate definition of base addresses
  OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention
  OMAP4: CM: Remove non-functional registers in ES1.0
  OMAP: hwmod: Replace WARN by pr_warning for clockdomain check
  OMAP: hwmod: Rename hwmod name for the MPU
  OMAP: hwmod: Do not exit the iteration if one clock init failed
  OMAP: hwmod: Replace WARN by pr_warning if clock lookup failed
  OMAP: hwmod: Remove IS_ERR check with omap_clk_get_by_name return value
  OMAP: hwmod: Fix wrong pointer iteration in oh->slaves
  ...

12 files changed, 100 insertions, 52 deletions

diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 34f7fa9ad4c0..dfc472ca0cc4 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -196,15 +196,15 @@ extern struct clk dummy_ck;
 #define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
 
 /* Clksel_rate flags */
-#define DEFAULT_RATE		(1 << 0)
-#define RATE_IN_242X		(1 << 1)
-#define RATE_IN_243X		(1 << 2)
-#define RATE_IN_343X		(1 << 3)	/* rates common to all 343X */
-#define RATE_IN_3430ES2		(1 << 4)	/* 3430ES2 rates only */
-#define RATE_IN_36XX		(1 << 5)
-#define RATE_IN_4430		(1 << 6)
+#define RATE_IN_242X		(1 << 0)
+#define RATE_IN_243X		(1 << 1)
+#define RATE_IN_3XXX		(1 << 2)	/* rates common to all OMAP3 */
+#define RATE_IN_3430ES2		(1 << 3)	/* 3430ES2 rates only */
+#define RATE_IN_36XX		(1 << 4)
+#define RATE_IN_4430		(1 << 5)
 
 #define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
 
+#define RATE_IN_3430ES2PLUS	(RATE_IN_3430ES2 | RATE_IN_36XX)
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 7556e271942e..d265018f5e6b 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -31,9 +31,6 @@
 
 struct sys_timer;
 
-/* used by omap-smp.c and board-4430sdp.c */
-extern void __iomem *gic_cpu_base_addr;
-
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
 
diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h
index a56deee97676..131bf405c2f6 100644
--- a/arch/arm/plat-omap/include/plat/control.h
+++ b/arch/arm/plat-omap/include/plat/control.h
@@ -207,6 +207,9 @@
 /* 44xx control status register offset */
 #define OMAP44XX_CONTROL_STATUS		0x2c4
 
+/* 44xx-only CONTROL_GENERAL register offsets */
+#define OMAP44XX_CONTROL_MMC1			0x628
+#define OMAP44XX_CONTROL_PBIAS_LITE		0x600
 /*
  * REVISIT: This list of registers is not comprehensive - there are more
  * that should be added.
@@ -252,6 +255,23 @@
 #define OMAP2_PBIASLITEPWRDNZ0		(1 << 1)
 #define OMAP2_PBIASLITEVMODE0		(1 << 0)
 
+/* CONTROL_PBIAS_LITE bits for OMAP4 */
+#define OMAP4_MMC1_PWRDNZ			(1 << 26)
+#define OMAP4_MMC1_PBIASLITE_HIZ_MODE		(1 << 25)
+#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT	(1 << 24)
+#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR	(1 << 23)
+#define OMAP4_MMC1_PBIASLITE_PWRDNZ		(1 << 22)
+#define OMAP4_MMC1_PBIASLITE_VMODE		(1 << 21)
+#define OMAP4_USBC1_ICUSB_PWRDNZ		(1 << 20)
+
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP0	(1 << 31)
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP1	(1 << 30)
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP2	(1 << 29)
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP3	(1 << 28)
+#define OMAP4_CONTROL_SDMMC1_DR0_SPEEDCTRL	(1 << 27)
+#define OMAP4_CONTROL_SDMMC1_DR1_SPEEDCTRL	(1 << 26)
+#define OMAP4_CONTROL_SDMMC1_DR2_SPEEDCTRL	(1 << 25)
+
 /* CONTROL_PROG_IO1 bits */
 #define OMAP3630_PRG_SDMMC1_SPEEDCTRL	(1 << 20)
 
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index de7c54731cbe..de1c604962eb 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -72,8 +72,8 @@
 				 IH_GPIO_BASE + (nr))
 
 extern int omap_gpio_init(void);	/* Call from board init only */
-extern void omap2_gpio_prepare_for_retention(void);
-extern void omap2_gpio_resume_after_retention(void);
+extern void omap2_gpio_prepare_for_idle(int power_state);
+extern void omap2_gpio_resume_after_idle(void);
 extern void omap_set_gpio_debounce(int gpio, int enable);
 extern void omap_set_gpio_debounce_time(int gpio, int enable);
 extern void omap_gpio_save_context(void);
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 401701977dbb..c01d9f08a198 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -428,4 +428,8 @@ void omap3_intc_resume_idle(void);
 
 #include <mach/hardware.h>
 
+#ifdef CONFIG_FIQ
+#define FIQ_START		1024
+#endif
+
 #endif
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index a1bac07c89eb..c835f1e994c6 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -102,6 +102,10 @@ struct omap_mmc_platform_data {
 		/* Regulator off remapped to sleep */
 		unsigned vcc_aux_disable_is_sleep:1;
 
+		/* we can put the features above into this variable */
+#define HSMMC_HAS_PBIAS		(1 << 0)
+		unsigned features;
+
 		int switch_pin;			/* gpio (card detect) */
 		int gpio_wp;			/* gpio (write protect) */
 
diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
index f235d32cd942..ffd909fa5287 100644
--- a/arch/arm/plat-omap/include/plat/multi.h
+++ b/arch/arm/plat-omap/include/plat/multi.h
@@ -61,9 +61,9 @@
 #  define OMAP_NAME omap16xx
 # endif
 #endif
-#if (defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
+#ifdef CONFIG_ARCH_OMAP2PLUS
 # if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
-#  error "OMAP1 and OMAP2 can't be selected at the same time"
+#  error "OMAP1 and OMAP2PLUS can't be selected at the same time"
 # endif
 #endif
 #ifdef CONFIG_ARCH_OMAP2420
@@ -82,12 +82,20 @@
 #  define OMAP_NAME omap2430
 # endif
 #endif
-#ifdef CONFIG_ARCH_OMAP3430
+#ifdef CONFIG_ARCH_OMAP3
 # ifdef OMAP_NAME
 #  undef  MULTI_OMAP2
 #  define MULTI_OMAP2
 # else
-#  define OMAP_NAME omap3430
+#  define OMAP_NAME omap3
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap4
 # endif
 #endif
 
diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h
index b3ef1a7f53cc..8b3f12ff5cbc 100644
--- a/arch/arm/plat-omap/include/plat/omap44xx.h
+++ b/arch/arm/plat-omap/include/plat/omap44xx.h
@@ -30,6 +30,7 @@
 #define OMAP4430_CM_BASE		OMAP4430_CM1_BASE
 #define OMAP4430_CM2_BASE		0x4a008000
 #define OMAP4430_PRM_BASE		0x4a306000
+#define OMAP4430_PRCM_MPU_BASE		0x48243000
 #define OMAP44XX_GPMC_BASE		0x50000000
 #define OMAP443X_SCM_BASE		0x4a002000
 #define OMAP443X_CTRL_BASE		0x4a100000
@@ -48,5 +49,8 @@
 #define OMAP44XX_MAILBOX_BASE		(L4_44XX_BASE + 0xF4000)
 #define OMAP44XX_HSUSB_OTG_BASE		(L4_44XX_BASE + 0xAB000)
 
+#define OMAP4_MMU1_BASE			0x55082000
+#define OMAP4_MMU2_BASE			0x4A066000
+
 #endif /* __ASM_ARCH_OMAP44XX_H */
 
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 36d6ea56ab51..0eccc09ac4a9 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -176,9 +176,8 @@ struct omap_hwmod_addr_space {
 #define OCP_USER_SDMA			(1 << 1)
 
 /* omap_hwmod_ocp_if.flags bits */
-#define OCPIF_HAS_IDLEST		(1 << 0)
-#define OCPIF_SWSUP_IDLE		(1 << 1)
-#define OCPIF_CAN_BURST			(1 << 2)
+#define OCPIF_SWSUP_IDLE		(1 << 0)
+#define OCPIF_CAN_BURST			(1 << 1)
 
 /**
  * struct omap_hwmod_ocp_if - OCP interface data
@@ -327,14 +326,12 @@ struct omap_hwmod_omap2_prcm {
 
 /**
  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
- * @module_offs: PRCM submodule offset from the start of the PRM/CM1/CM2
- * @device_offs: device register offset from @module_offs
+ * @clkctrl_reg: PRCM address of the clock control register
  * @submodule_wkdep_bit: bit shift of the WKDEP range
  */
 struct omap_hwmod_omap4_prcm {
-	u32 module_offs;
-	u16 device_offs;
-	u8 submodule_wkdep_bit;
+	void __iomem	*clkctrl_reg;
+	u8		submodule_wkdep_bit;
 };
 
 
@@ -353,6 +350,8 @@ struct omap_hwmod_omap4_prcm {
  *     when module is enabled, rather than the default, which is to
  *     enable autoidle
  * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
+ * HWMOD_NO_IDLEST : this module does not have idle status - this is the case
+ *     only for few initiator modules on OMAP2 & 3.
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -360,6 +359,7 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_INIT_NO_IDLE			(1 << 3)
 #define HWMOD_NO_OCP_AUTOIDLE			(1 << 4)
 #define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 5)
+#define HWMOD_NO_IDLEST				(1 << 6)
 
 /*
  * omap_hwmod._int_flags definitions
diff --git a/arch/arm/plat-omap/include/plat/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h
index d82b2c00d4f1..fb6ec74fe39e 100644
--- a/arch/arm/plat-omap/include/plat/powerdomain.h
+++ b/arch/arm/plat-omap/include/plat/powerdomain.h
@@ -31,6 +31,7 @@
 #define PWRDM_MAX_PWRSTS	4
 
 /* Powerdomain allowable state bitfields */
+#define PWRSTS_ON		(1 << PWRDM_POWER_ON)
 #define PWRSTS_OFF_ON		((1 << PWRDM_POWER_OFF) | \
 				 (1 << PWRDM_POWER_ON))
 
@@ -49,6 +50,12 @@
 					  * in MEM bank 1 position. This is
 					  * true for OMAP3430
 					  */
+#define PWRDM_HAS_LOWPOWERSTATECHANGE	(1 << 2) /*
+						  * support to transition from a
+						  * sleep state to a lower sleep
+						  * state without waking up the
+						  * powerdomain
+						  */
 
 /*
  * Number of memory banks that are power-controllable.	On OMAP4430, the
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 83dce4c4f7e6..19145f5c32ba 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -15,6 +15,20 @@
 
 #include <linux/init.h>
 
+/*
+ * Memory entry used for the DEBUG_LL UART configuration. See also
+ * uncompress.h and debug-macro.S.
+ *
+ * Note that using a memory location for storing the UART configuration
+ * has at least two limitations:
+ *
+ * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
+ *    uncompress code could then partially overwrite itself
+ * 2. We assume printascii is called at least once before paging_init,
+ *    and addruart has a chance to read OMAP_UART_INFO
+ */
+#define OMAP_UART_INFO		(PHYS_OFFSET + 0x3ffc)
+
 /* OMAP1 serial ports */
 #define OMAP1_UART1_BASE	0xfffb0000
 #define OMAP1_UART2_BASE	0xfffb0800
@@ -39,7 +53,7 @@
 
 /* External port on Zoom2/3 */
 #define ZOOM_UART_BASE		0x10000000
-#define ZOOM_UART_VIRT		0xfb000000
+#define ZOOM_UART_VIRT		0xfa400000
 
 #define OMAP_PORT_SHIFT		2
 #define OMAP7XX_PORT_SHIFT	0
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 81d9ec540fcf..bbedd71943f6 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -20,27 +20,21 @@
 #include <linux/types.h>
 #include <linux/serial_reg.h>
 
+#include <asm/memory.h>
 #include <asm/mach-types.h>
 
 #include <plat/serial.h>
 
-static volatile u8 *uart1_base;
-static int uart1_shift;
-
 static volatile u8 *uart_base;
 static int uart_shift;
 
 /*
- * Store the DEBUG_LL uart number into UART1 scratchpad register.
+ * Store the DEBUG_LL uart number into memory.
  * See also debug-macro.S, and serial.c for related code.
- *
- * Please note that we currently assume that:
- * - UART1 clocks are enabled for register access
- * - UART1 scratchpad register can be used
  */
-static void set_uart1_scratchpad(unsigned char port)
+static void set_omap_uart_info(unsigned char port)
 {
-	uart1_base[UART_SCR << uart1_shift] = port;
+	*(volatile u32 *)OMAP_UART_INFO = port;
 }
 
 static void putc(int c)
@@ -60,42 +54,38 @@ static inline void flush(void)
 /*
  * Macros to configure UART1 and debug UART
  */
-#define _DEBUG_LL_ENTRY(mach, uart1_phys, uart1_shft,			\
-			dbg_uart, dbg_shft, dbg_id)			\
+#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id)		\
 	if (machine_is_##mach()) {					\
-		uart1_base = (volatile u8 *)(uart1_phys);		\
-		uart1_shift = (uart1_shft);				\
 		uart_base = (volatile u8 *)(dbg_uart);			\
 		uart_shift = (dbg_shft);				\
 		port = (dbg_id);					\
-		set_uart1_scratchpad(port);				\
+		set_omap_uart_info(port);				\
 		break;							\
 	}
 
 #define DEBUG_LL_OMAP7XX(p, mach)					\
-	_DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP7XX_PORT_SHIFT,	\
-		OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, OMAP1UART##p)
+	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT,	\
+		OMAP1UART##p)
 
 #define DEBUG_LL_OMAP1(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP_PORT_SHIFT,	\
-		OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP1UART##p)
+	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP1UART##p)
 
 #define DEBUG_LL_OMAP2(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT,	\
-		OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP2UART##p)
+	_DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP2UART##p)
 
 #define DEBUG_LL_OMAP3(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP3_UART1_BASE, OMAP_PORT_SHIFT,	\
-		OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP3UART##p)
+	_DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP3UART##p)
 
 #define DEBUG_LL_OMAP4(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP4_UART1_BASE, OMAP_PORT_SHIFT,	\
-		OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP4UART##p)
+	_DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP4UART##p)
 
 /* Zoom2/3 shift is different for UART1 and external port */
 #define DEBUG_LL_ZOOM(mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT,	\
-		ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
+	_DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
 
 static inline void __arch_decomp_setup(unsigned long arch_id)
 {