Merge tag 'soc_for_v3.10' of git://git.infradead.org/users/jcooper/linux into next/soc2

From Jason Cooper:
mvebu soc changes for v3.10

 - use the mvebu-mbus driver
 - prep for LPAE support

Depends:
 - mvebu/cleanup (tags/cleanup_for_v3.10)
 - mvebu/drivers (tags/drivers_for_v3.10)

* tag 'soc_for_v3.10' of git://git.infradead.org/users/jcooper/linux:
  ARM: mvebu: Align the internal registers virtual base to support LPAE
  ARM: mvebu: Limit the DMA zone when LPAE is selected
  arm: plat-orion: remove addr-map code
  arm: mach-mv78xx0: convert to use the mvebu-mbus driver
  arm: mach-orion5x: convert to use mvebu-mbus driver
  arm: mach-dove: convert to use mvebu-mbus driver
  arm: mach-kirkwood: convert to use mvebu-mbus driver
  arm: mach-mvebu: convert to use mvebu-mbus driver
  bus: mvebu: fix mistake in PCIe window target attribute for Kirkwood
  bus: mvebu-mbus: Restore checking for coherency fabric hardware
  ARM: Orion: add dbg_show function to gpio-orion driver
  bus: introduce an Marvell EBU MBus driver
  arm: mach-orion5x: use mv_mbus_dram_info() in PCI code
  arm: plat-orion: use mv_mbus_dram_info() in PCIe code
  arm: plat-orion: only build addr-map.c when needed

Signed-off-by: Olof Johansson <olof@lixom.net>

4 files changed, 65 insertions, 184 deletions

diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile
index a82cecb84948..2eca54b65906 100644
--- a/arch/arm/plat-orion/Makefile
+++ b/arch/arm/plat-orion/Makefile
@@ -3,8 +3,6 @@
 #
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
 
-obj-y                             += addr-map.o
-
 orion-gpio-$(CONFIG_GENERIC_GPIO) += gpio.o
 obj-$(CONFIG_PLAT_ORION_LEGACY)   += irq.o pcie.o time.o common.o mpp.o
 obj-$(CONFIG_PLAT_ORION_LEGACY)   += $(orion-gpio-y)
diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c
deleted file mode 100644
index 807ac8e5cbc0..000000000000
--- a/arch/arm/plat-orion/addr-map.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * arch/arm/plat-orion/addr-map.c
- *
- * Address map functions for Marvell Orion based SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <plat/addr-map.h>
-
-struct mbus_dram_target_info orion_mbus_dram_info;
-
-const struct mbus_dram_target_info *mv_mbus_dram_info(void)
-{
-	return &orion_mbus_dram_info;
-}
-EXPORT_SYMBOL_GPL(mv_mbus_dram_info);
-
-/*
- * DDR target is the same on all Orion platforms.
- */
-#define TARGET_DDR		0
-
-/*
- * Helpers to get DDR bank info
- */
-#define DDR_BASE_CS_OFF(n)	(0x0000 + ((n) << 3))
-#define DDR_SIZE_CS_OFF(n)	(0x0004 + ((n) << 3))
-
-/*
- * CPU Address Decode Windows registers
- */
-#define WIN_CTRL_OFF		0x0000
-#define WIN_BASE_OFF		0x0004
-#define WIN_REMAP_LO_OFF	0x0008
-#define WIN_REMAP_HI_OFF	0x000c
-
-#define ATTR_HW_COHERENCY	(0x1 << 4)
-
-/*
- * Default implementation
- */
-static void __init __iomem *
-orion_win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
-{
-	return cfg->bridge_virt_base + (win << 4);
-}
-
-/*
- * Default implementation
- */
-static int __init orion_cpu_win_can_remap(const struct orion_addr_map_cfg *cfg,
-					  const int win)
-{
-	if (win < cfg->remappable_wins)
-		return 1;
-
-	return 0;
-}
-
-void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg,
-				const int win, const u32 base,
-				const u32 size, const u8 target,
-				const u8 attr, const int remap)
-{
-	void __iomem *addr = cfg->win_cfg_base(cfg, win);
-	u32 ctrl, base_high, remap_addr;
-
-	if (win >= cfg->num_wins) {
-		printk(KERN_ERR "setup_cpu_win: trying to allocate window "
-		       "%d when only %d allowed\n", win, cfg->num_wins);
-	}
-
-	base_high = base & 0xffff0000;
-	ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
-
-	writel(base_high, addr + WIN_BASE_OFF);
-	writel(ctrl, addr + WIN_CTRL_OFF);
-	if (cfg->cpu_win_can_remap(cfg, win)) {
-		if (remap < 0)
-			remap_addr = base;
-		else
-			remap_addr = remap;
-		writel(remap_addr & 0xffff0000, addr + WIN_REMAP_LO_OFF);
-		writel(0, addr + WIN_REMAP_HI_OFF);
-	}
-}
-
-/*
- * Configure a number of windows.
- */
-static void __init orion_setup_cpu_wins(const struct orion_addr_map_cfg * cfg,
-					const struct orion_addr_map_info *info)
-{
-	while (info->win != -1) {
-		orion_setup_cpu_win(cfg, info->win, info->base, info->size,
-				    info->target, info->attr, info->remap);
-		info++;
-	}
-}
-
-static void __init orion_disable_wins(const struct orion_addr_map_cfg * cfg)
-{
-	void __iomem *addr;
-	int i;
-
-	for (i = 0; i < cfg->num_wins; i++) {
-		addr = cfg->win_cfg_base(cfg, i);
-
-		writel(0, addr + WIN_BASE_OFF);
-		writel(0, addr + WIN_CTRL_OFF);
-		if (cfg->cpu_win_can_remap(cfg, i)) {
-			writel(0, addr + WIN_REMAP_LO_OFF);
-			writel(0, addr + WIN_REMAP_HI_OFF);
-		}
-	}
-}
-
-/*
- * Disable, clear and configure windows.
- */
-void __init orion_config_wins(struct orion_addr_map_cfg * cfg,
-			      const struct orion_addr_map_info *info)
-{
-	if (!cfg->cpu_win_can_remap)
-		cfg->cpu_win_can_remap = orion_cpu_win_can_remap;
-
-	if (!cfg->win_cfg_base)
-		cfg->win_cfg_base = orion_win_cfg_base;
-
-	orion_disable_wins(cfg);
-
-	if (info)
-		orion_setup_cpu_wins(cfg, info);
-}
-
-/*
- * Setup MBUS dram target info.
- */
-void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
-					const void __iomem *ddr_window_cpu_base)
-{
-	int i;
-	int cs;
-
-	orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
-
-	for (i = 0, cs = 0; i < 4; i++) {
-		u32 base = readl(ddr_window_cpu_base + DDR_BASE_CS_OFF(i));
-		u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i));
-
-		/*
-		 * We only take care of entries for which the chip
-		 * select is enabled, and that don't have high base
-		 * address bits set (devices can only access the first
-		 * 32 bits of the memory).
-		 */
-		if ((size & 1) && !(base & 0xF)) {
-			struct mbus_dram_window *w;
-
-			w = &orion_mbus_dram_info.cs[cs++];
-			w->cs_index = i;
-			w->mbus_attr = 0xf & ~(1 << i);
-			if (cfg->hw_io_coherency)
-				w->mbus_attr |= ATTR_HW_COHERENCY;
-			w->base = base & 0xffff0000;
-			w->size = (size | 0x0000ffff) + 1;
-		}
-	}
-	orion_mbus_dram_info.num_cs = cs;
-}
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index c29ee7ea200b..e39c2ba6e2fb 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -439,6 +439,64 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 	}
 }
 
+#ifdef CONFIG_DEBUG_FS
+#include <linux/seq_file.h>
+
+static void orion_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	struct orion_gpio_chip *ochip =
+		container_of(chip, struct orion_gpio_chip, chip);
+	u32 out, io_conf, blink, in_pol, data_in, cause, edg_msk, lvl_msk;
+	int i;
+
+	out	= readl_relaxed(GPIO_OUT(ochip));
+	io_conf	= readl_relaxed(GPIO_IO_CONF(ochip));
+	blink	= readl_relaxed(GPIO_BLINK_EN(ochip));
+	in_pol	= readl_relaxed(GPIO_IN_POL(ochip));
+	data_in	= readl_relaxed(GPIO_DATA_IN(ochip));
+	cause	= readl_relaxed(GPIO_EDGE_CAUSE(ochip));
+	edg_msk	= readl_relaxed(GPIO_EDGE_MASK(ochip));
+	lvl_msk	= readl_relaxed(GPIO_LEVEL_MASK(ochip));
+
+	for (i = 0; i < chip->ngpio; i++) {
+		const char *label;
+		u32 msk;
+		bool is_out;
+
+		label = gpiochip_is_requested(chip, i);
+		if (!label)
+			continue;
+
+		msk = 1 << i;
+		is_out = !(io_conf & msk);
+
+		seq_printf(s, " gpio-%-3d (%-20.20s)", chip->base + i, label);
+
+		if (is_out) {
+			seq_printf(s, " out %s %s\n",
+				   out & msk ? "hi" : "lo",
+				   blink & msk ? "(blink )" : "");
+			continue;
+		}
+
+		seq_printf(s, " in  %s (act %s) - IRQ",
+			   (data_in ^ in_pol) & msk  ? "hi" : "lo",
+			   in_pol & msk ? "lo" : "hi");
+		if (!((edg_msk | lvl_msk) & msk)) {
+			seq_printf(s, " disabled\n");
+			continue;
+		}
+		if (edg_msk & msk)
+			seq_printf(s, " edge ");
+		if (lvl_msk & msk)
+			seq_printf(s, " level");
+		seq_printf(s, " (%s)\n", cause & msk ? "pending" : "clear  ");
+	}
+}
+#else
+#define orion_gpio_dbg_show NULL
+#endif
+
 void __init orion_gpio_init(struct device_node *np,
 			    int gpio_base, int ngpio,
 			    void __iomem *base, int mask_offset,
@@ -471,6 +529,7 @@ void __init orion_gpio_init(struct device_node *np,
 #ifdef CONFIG_OF
 	ochip->chip.of_node = np;
 #endif
+	ochip->chip.dbg_show = orion_gpio_dbg_show;
 
 	spin_lock_init(&ochip->lock);
 	ochip->base = (void __iomem *)base;
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index f20a321088a2..8b8c06d2e9c4 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -120,12 +120,14 @@ void __init orion_pcie_reset(void __iomem *base)
  * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
  * WIN[0-3] -> DRAM bank[0-3]
  */
-static void __init orion_pcie_setup_wins(void __iomem *base,
-					 struct mbus_dram_target_info *dram)
+static void __init orion_pcie_setup_wins(void __iomem *base)
 {
+	const struct mbus_dram_target_info *dram;
 	u32 size;
 	int i;
 
+	dram = mv_mbus_dram_info();
+
 	/*
 	 * First, disable and clear BARs and windows.
 	 */
@@ -150,7 +152,7 @@ static void __init orion_pcie_setup_wins(void __iomem *base,
 	 */
 	size = 0;
 	for (i = 0; i < dram->num_cs; i++) {
-		struct mbus_dram_window *cs = dram->cs + i;
+		const struct mbus_dram_window *cs = dram->cs + i;
 
 		writel(cs->base & 0xffff0000, base + PCIE_WIN04_BASE_OFF(i));
 		writel(0, base + PCIE_WIN04_REMAP_OFF(i));
@@ -184,7 +186,7 @@ void __init orion_pcie_setup(void __iomem *base)
 	/*
 	 * Point PCIe unit MBUS decode windows to DRAM space.
 	 */
-	orion_pcie_setup_wins(base, &orion_mbus_dram_info);
+	orion_pcie_setup_wins(base);
 
 	/*
 	 * Master + slave enable.