arm64: dts: amlogic: meson-gx: add the Mali-450 OPP table and use DVFS

Add the OPP table for the Mali-450 GPU and drop the hardcoded initial
clock configuration. This enables GPU DVFS and thus saves power when the
GPU is not in use while still being able switch to a higher clock on
demand.

Set the GP0_PLL clock to 744MHz (which is the only frequency which
cannot be derived from the FCLK dividers) as the clock driver avoids
setting the parent clock rates so the MPLL clocks aren't changed (as
these are reserved for audio). The only exception to this is the GXL
S805X package because the 744MHz OPP isn't working correctly there.

While here, make most of meson-gxl-mali re-usable to reduce the amount
of duplicate code between GXBB and GXL. This is more important now as we
don't want to duplicate the GPU OPP table.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200719173213.639540-2-martin.blumenstingl@googlemail.com

1 files changed, 11 insertions, 40 deletions

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index ea50dd434887..7c029f552a23 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include "meson-gx.dtsi"
+#include "meson-gx-mali450.dtsi"
 #include <dt-bindings/gpio/meson-gxbb-gpio.h>
 #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
 #include <dt-bindings/clock/gxbb-clkc.h>
@@ -264,46 +265,6 @@
 	};
 };
 
-&apb {
-	mali: gpu@c0000 {
-		compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
-		reg = <0x0 0xc0000 0x0 0x40000>;
-		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "gp", "gpmmu", "pp", "pmu",
-			"pp0", "ppmmu0", "pp1", "ppmmu1",
-			"pp2", "ppmmu2";
-		clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
-		clock-names = "bus", "core";
-
-		/*
-		 * Mali clocking is provided by two identical clock paths
-		 * MALI_0 and MALI_1 muxed to a single clock by a glitch
-		 * free mux to safely change frequency while running.
-		 */
-		assigned-clocks = <&clkc CLKID_GP0_PLL>,
-				  <&clkc CLKID_MALI_0_SEL>,
-				  <&clkc CLKID_MALI_0>,
-				  <&clkc CLKID_MALI>; /* Glitch free mux */
-		assigned-clock-parents = <0>, /* Do Nothing */
-					 <&clkc CLKID_GP0_PLL>,
-					 <0>, /* Do Nothing */
-					 <&clkc CLKID_MALI_0>;
-		assigned-clock-rates = <744000000>,
-				       <0>, /* Do Nothing */
-				       <744000000>,
-				       <0>; /* Do Nothing */
-	};
-};
-
 &cbus {
 	spifc: spi@8c80 {
 		compatible = "amlogic,meson-gxbb-spifc";
@@ -386,6 +347,16 @@
 	clocks = <&clkc CLKID_I2C>;
 };
 
+&mali {
+	compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+
+	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+	clock-names = "bus", "core";
+
+	assigned-clocks = <&clkc CLKID_GP0_PLL>;
+	assigned-clock-rates = <744000000>;
+};
+
 &periphs {
 	pinctrl_periphs: pinctrl@4b0 {
 		compatible = "amlogic,meson-gxbb-periphs-pinctrl";