Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC device tree updates from Arnd Bergmann:
 "This is a smaller update than the past few times, but with just over
  500 non-merge changesets still dwarfes the rest of the SoC tree.

  Three new SoC platforms get added, each one a follow-up to an existing
  product, and added here in combination with a reference platform:

   - Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging
     processor:

       https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html

   - Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for Rich Graphics
     Applications":

       https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html

   - NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC:

       https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X

  These are actual commercial products we now support with an in-kernel
  device tree source file:

   - Bosch Guardian is a product made by Bosch Power Tools GmbH, based
     on the Texas Instruments AM335x chip

   - Winterland IceBoard is a Texas Instruments AM3874 based machine
     used in telescopes at the south pole and elsewhere, see commit
     d031773169df2 for some pointers:

   - Inspur on5263m5 is an x86 server platform with an Aspeed ast2500
     baseboard management controller. This is for running on the BMC.

   - Zodiac Digital Tapping Unit, apparently a kind of ethernet switch
     used in airplanes.

   - Phicomm K3 is a WiFi router based on Broadcom bcm47094

   - Methode Electronics uDPU FTTdp distribution point unit

   - X96 Max, a generic TV box based on Amlogic G12a (S905X2)

   - NVIDIA Shield TV (Darcy) based on Tegra210

  And then there are several new SBC, evaluation, development or modular
  systems that we add:

   - Three new Rockchips rk3399 based boards:
       - FriendlyElec NanoPC-T4 and NanoPi M4
       - Radxa ROCK Pi 4

   - Five new i.MX6 family SoM modules and boards for industrial
     products:
       - Logic PD i.MX6QD SoM and evaluation baseboad
       - Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL
       - Phytec phyCORE i.MX6 UltraLite SoM and evaluation module

   - MYIR Tech MYD-LPC4357 development based on the NXP lpc4357
     microcontroller

   - Chameleon96, an Intel/Altera Cyclone5 based FPGA development system
     in 96boards form factor

   - Arm Fixed Virtual Platforms(FVP) Base RevC, a purely virtual
     platform for corresponding to the latest "fast model"

   - Another Raspberry Pi variant: Model 3 A+, supported both in 32-bit
     and 64-bit mode.

   - Oxalis Evalkit V100 based on NXP Layerscape LS1012a, in 96Boards
     enterprise form factor

   - Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108

  For already supported boards and SoCs, we often add support for new
  devices after merging the drivers. This time, the largest changes
  include updates for

   - STMicroelectronics stm32mp1, which was now formally launched last
     week

   - Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip

   - Action Semi S700

   - TI AM654x, their recently merged 64-bit SoC from the OMAP family

   - Various Amlogic Meson SoCs

   - Mediatek MT2712

   - NVIDIA Tegra186 and Tegra210

   - The ancient NXP lpc32xx family

   - Samsung s5pv210, used in some older mobile phones

  Many other chips see smaller updates and bugfixes beyond that"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (506 commits)
  ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4
  dt-bindings: net: ti: deprecate cpsw-phy-sel bindings
  ARM: dts: am335x: switch to use phy-gmii-sel
  ARM: dts: am4372: switch to use phy-gmii-sel
  ARM: dts: dm814x: switch to use phy-gmii-sel
  ARM: dts: dra7: switch to use phy-gmii-sel
  arch: arm: dts: kirkwood-rd88f6281: Remove disabled marvell,dsa reference
  ARM: dts: exynos: Add support for secondary DAI to Odroid XU4
  ARM: dts: exynos: Add support for secondary DAI to Odroid XU3
  ARM: dts: exynos: Disable ARM PMU on Odroid XU3-lite
  ARM: dts: exynos: Add stdout path property to Arndale board
  ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU
  ARM: dts: exynos: Enable ADC on Odroid HC1
  arm64: dts: sprd: Remove wildcard compatible string
  arm64: dts: sprd: Add SC27XX fuel gauge device
  arm64: dts: sprd: Add SC2731 charger device
  arm64: dts: sprd: Add ADC calibration support
  arm64: dts: sprd: Remove PMIC INTC irq trigger type
  arm64: dts: rockchip: Enable tsadc device on rock960
  ARM: dts: rockchip: add chosen node on veyron devices
  ...

12 files changed, 296 insertions, 32 deletions

diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 2eff1f927471..caed4334f27d 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -2,6 +2,7 @@
 # Mvebu SoC Family
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
index 846003bb480c..6be019e1888e 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -46,11 +46,16 @@
 /* J9 */
 &pcie0 {
 	status = "okay";
+	phys = <&comphy1 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
 };
 
 /* J6 */
 &sata {
 	status = "okay";
+	phys = <&comphy2 0>;
+	phy-names = "sata-phy";
 };
 
 /* J1 */
@@ -156,6 +161,11 @@
 				reg = <0>;
 				label = "cpu";
 				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
 			};
 
 			port@1 {
@@ -196,6 +206,8 @@
 };
 
 &eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
 	phy-mode = "rgmii-id";
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
new file mode 100644
index 000000000000..bd4aab6092e0
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device tree for the uDPU board.
+ * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3)
+ * Copyright (C) 2016 Marvell
+ * Copyright (C) 2019 Methode Electronics
+ * Copyright (C) 2019 Telus
+ *
+ * Vladimir Vid <vladimir.vid@sartura.hr>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "Methode uDPU Board";
+	compatible = "methode,udpu", "marvell,armada3720";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		compatible = "gpio-leds";
+
+		power1 {
+			label = "udpu:green:power";
+			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+		};
+
+		power2 {
+			label = "udpu:red:power";
+			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+		};
+
+		network1 {
+			label = "udpu:green:network";
+			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+		};
+
+		network2 {
+			label = "udpu:red:network";
+			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+		};
+
+		alarm1 {
+			label = "udpu:green:alarm";
+			gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;
+		};
+
+		alarm2 {
+			label = "udpu:red:alarm";
+			gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sfp_eth0: sfp-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c0>;
+		los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth1: sfp-eth1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	marvell,pad-type = "fixed-1-8v";
+	non-removable;
+	no-sd;
+	no-sdio;
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins>;
+
+	m25p80@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <54000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* only bootloader is located on the SPI */
+			partition@0 {
+				label = "uboot";
+				reg = <0 0x400000>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	lm75@48 {
+		status = "okay";
+		compatible = "lm75";
+		reg = <0x48>;
+	};
+
+	lm75@49 {
+		status = "okay";
+		compatible = "lm75";
+		reg = <0x49>;
+	};
+};
+
+&eth0 {
+	phy-mode = "sgmii";
+	status = "okay";
+	managed = "in-band-status";
+	sfp = <&sfp_eth0>;
+};
+
+&eth1 {
+	phy-mode = "sgmii";
+	status = "okay";
+	managed = "in-band-status";
+	sfp = <&sfp_eth1>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
index 6800945a88ad..5ce55bdbb995 100644
--- a/arch/arm64/boot/dts/marvell/armada-372x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
@@ -18,7 +18,7 @@
 	cpus {
 		cpu1: cpu@1 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a53","arm,armv8";
+			compatible = "arm,cortex-a53";
 			reg = <0x1>;
 			clocks = <&nb_periph_clk 16>;
 			enable-method = "psci";
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index e05594ea15fb..f43c43168b00 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -42,7 +42,7 @@
 		#size-cells = <0>;
 		cpu0: cpu@0 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
+			compatible = "arm,cortex-a53";
 			reg = <0>;
 			clocks = <&nb_periph_clk 16>;
 			enable-method = "psci";
@@ -247,6 +247,35 @@
 				reg = <0x14000 0x60>;
 			};
 
+			comphy: phy@18300 {
+				compatible = "marvell,comphy-a3700";
+				reg = <0x18300 0x300>,
+				      <0x1F000 0x400>,
+				      <0x5C000 0x400>,
+				      <0xe0178 0x8>;
+				reg-names = "comphy",
+					    "lane1_pcie_gbe",
+					    "lane0_usb3_gbe",
+					    "lane2_sata_usb3";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				comphy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <1>;
+				};
+
+				comphy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <1>;
+				};
+
+				comphy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <1>;
+				};
+			};
+
 			pinctrl_sb: pinctrl@18800 {
 				compatible = "marvell,armada3710-sb-pinctrl",
 					     "syscon", "simple-mfd";
@@ -271,11 +300,25 @@
 					function = "mii";
 				};
 
+				smi_pins: smi-pins {
+					groups = "smi";
+					function = "smi";
+				};
+
 				sdio_pins: sdio-pins {
 					groups = "sdio_sb";
 					function = "sdio";
 				};
 
+				pcie_reset_pins: pcie-reset-pins {
+					groups = "pcie1";
+					function = "pcie";
+				};
+
+				pcie_clkreq_pins: pcie-clkreq-pins {
+					groups = "pcie1_clkreq";
+					function = "pcie";
+				};
 			};
 
 			eth0: ethernet@30000 {
@@ -305,18 +348,50 @@
 				compatible = "marvell,armada3700-xhci",
 				"generic-xhci";
 				reg = <0x58000 0x4000>;
+				marvell,usb-misc-reg = <&usb32_syscon>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&sb_periph_clk 12>;
+				phys = <&comphy0 0>, <&usb2_utmi_otg_phy>;
+				phy-names = "usb3-phy", "usb2-utmi-otg-phy";
 				status = "disabled";
 			};
 
+			usb2_utmi_otg_phy: phy@5d000 {
+				compatible = "marvell,a3700-utmi-otg-phy";
+				reg = <0x5d000 0x800>;
+				marvell,usb-misc-reg = <&usb32_syscon>;
+				#phy-cells = <0>;
+			};
+
+			usb32_syscon: system-controller@5d800 {
+				compatible = "marvell,armada-3700-usb2-host-device-misc",
+				"syscon";
+				reg = <0x5d800 0x800>;
+			};
+
 			usb2: usb@5e000 {
 				compatible = "marvell,armada-3700-ehci";
-				reg = <0x5e000 0x2000>;
+				reg = <0x5e000 0x1000>;
+				marvell,usb-misc-reg = <&usb2_syscon>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_utmi_host_phy>;
+				phy-names = "usb2-utmi-host-phy";
 				status = "disabled";
 			};
 
+			usb2_utmi_host_phy: phy@5f000 {
+				compatible = "marvell,a3700-utmi-host-phy";
+				reg = <0x5f000 0x800>;
+				marvell,usb-misc-reg = <&usb2_syscon>;
+				#phy-cells = <0>;
+			};
+
+			usb2_syscon: system-controller@5f800 {
+				compatible = "marvell,armada-3700-usb2-host-misc",
+				"syscon";
+				reg = <0x5f800 0x800>;
+			};
+
 			xor@60900 {
 				compatible = "marvell,armada-3700-xor";
 				reg = <0x60900 0x100>,
@@ -368,8 +443,9 @@
 
 			sata: sata@e0000 {
 				compatible = "marvell,armada-3700-ahci";
-				reg = <0xe0000 0x2000>;
+				reg = <0xe0000 0x178>;
 				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&nb_periph_clk 1>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 412efdb46e7c..d20d84ce7ca8 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -66,8 +66,6 @@
 	status = "okay";
 
 	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
@@ -169,8 +167,6 @@
 	status = "okay";
 
 	spi-flash@0 {
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-max-frequency = <20000000>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 1bac437369a1..9f4f939ab65f 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -81,8 +81,6 @@
 	status = "okay";
 
 	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
@@ -214,8 +212,6 @@
 	status = "okay";
 
 	spi-flash@0 {
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-max-frequency = <20000000>;
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
index d3c0636558ff..861fd21922c4 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
@@ -17,13 +17,13 @@
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x000>;
 			enable-method = "psci";
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x001>;
 			enable-method = "psci";
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
index 01ea662afba8..2baafe12ebd4 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
@@ -17,25 +17,25 @@
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x000>;
 			enable-method = "psci";
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x001>;
 			enable-method = "psci";
 		};
 		cpu2: cpu@100 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x100>;
 			enable-method = "psci";
 		};
 		cpu3: cpu@101 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x101>;
 			enable-method = "psci";
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 7f799cb5668e..91dad7e4ee59 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -283,6 +283,8 @@
 				ap_thermal: thermal-sensor@80 {
 					compatible = "marvell,armada-ap806-thermal";
 					reg = <0x80 0x10>;
+					interrupt-parent = <&sei>;
+					interrupts = <18>;
 					#thermal-sensor-cells = <1>;
 				};
 			};
@@ -293,16 +295,26 @@
 	 * The thermal IP features one internal sensor plus, if applicable, one
 	 * remote channel wired to one sensor per CPU.
 	 *
+	 * Only one thermal zone per AP/CP may trigger interrupts at a time, the
+	 * first one that will have a critical trip point will be chosen.
+	 *
 	 * The cooling maps are always empty as there are no cooling devices.
 	 */
 	thermal-zones {
 		ap_thermal_ic: ap-thermal-ic {
-			polling-delay-passive = <1000>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>; /* Interrupt driven */
+			polling-delay = <0>; /* Interrupt driven */
 
 			thermal-sensors = <&ap_thermal 0>;
 
-			trips {	};
+			trips {
+				ap_crit: ap-crit {
+					temperature = <100000>; /* mC degrees */
+					hysteresis = <2000>; /* mC degrees */
+					type = "critical";
+				};
+			};
+
 			cooling-maps { };
 		};
 
diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
index b788cb63caf2..d1a7143ef3d4 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
@@ -15,49 +15,49 @@
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x000>;
 			enable-method = "psci";
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x001>;
 			enable-method = "psci";
 		};
 		cpu2: cpu@100 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x100>;
 			enable-method = "psci";
 		};
 		cpu3: cpu@101 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x101>;
 			enable-method = "psci";
 		};
 		cpu4: cpu@200 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x200>;
 			enable-method = "psci";
 		};
 		cpu5: cpu@201 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x201>;
 			enable-method = "psci";
 		};
 		cpu6: cpu@300 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x300>;
 			enable-method = "psci";
 		};
 		cpu7: cpu@301 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x301>;
 			enable-method = "psci";
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
index b9d9f31e3ba1..4d6e4a097f72 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -28,12 +28,19 @@
 	 */
 	thermal-zones {
 		CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) {
-			polling-delay-passive = <1000>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>; /* Interrupt driven */
+			polling-delay = <0>; /* Interrupt driven */
 
 			thermal-sensors = <&CP110_LABEL(thermal) 0>;
 
-			trips {	};
+			trips {
+				CP110_LABEL(crit): crit {
+					temperature = <100000>; /* mC degrees */
+					hysteresis = <2000>; /* mC degrees */
+					type = "critical";
+				};
+			};
+
 			cooling-maps { };
 		};
 	};
@@ -259,6 +266,8 @@
 			CP110_LABEL(thermal): thermal-sensor@70 {
 				compatible = "marvell,armada-cp110-thermal";
 				reg = <0x70 0x10>;
+				interrupts-extended =
+					<&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
 				#thermal-sensor-cells = <1>;
 			};
 		};