diff options
| author |   Thierry Reding <treding@nvidia.com> | 2019-01-23 12:39:42 +0100 |
|---|---|---|
| committer | Thierry Reding <treding@nvidia.com> | 2019-01-25 13:45:28 +0100 |
| commit | caca0482e7ea2e90f8bebe5477ca625621e031a6 (patch) | |
| tree | de0a77734322d24fa2261c8a3c255cb42150a6d8 /arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | |
| parent | arm64: tegra: p2597: Sort nodes by unit-address (diff) | |
| download | linux-dev-caca0482e7ea2e90f8bebe5477ca625621e031a6.tar.xz linux-dev-caca0482e7ea2e90f8bebe5477ca625621e031a6.zip | |
arm64: tegra: p3310: Use TEGRA186_ prefix for GPIO names
The new prefix allows the GPIOs to be uniquely identified on a per-chip
basis, which makes it easier to distinguish Tegra186 specific GPIOs from
those of later chips such as Tegra194 which supports a very different
set of GPIOs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Diffstat (limited to 'arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 10 |
1 files changed, 6 insertions, 4 deletions
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index b539561e7877..89a2da46efae 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -34,7 +34,8 @@ ethernet@2490000 { status = "okay"; - phy-reset-gpios = <&gpio TEGRA_MAIN_GPIO(M, 4) GPIO_ACTIVE_LOW>; + phy-reset-gpios = <&gpio TEGRA186_MAIN_GPIO(M, 4) + GPIO_ACTIVE_LOW>; phy-handle = <&phy>; phy-mode = "rgmii"; @@ -46,7 +47,8 @@ compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x0>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_MAIN_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>; + interrupts = <TEGRA186_MAIN_GPIO(M, 5) + IRQ_TYPE_LEVEL_LOW>; }; }; }; @@ -91,8 +93,8 @@ /* SDMMC1 (SD/MMC) */ sdhci@3400000 { - cd-gpios = <&gpio TEGRA_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio TEGRA_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>; vqmmc-supply = <&vddio_sdmmc1>; }; |