diff options
author | satya priya <skakit@codeaurora.org> | 2020-09-14 19:28:34 +0530 |
---|---|---|
committer | Bjorn Andersson <bjorn.andersson@linaro.org> | 2020-09-15 00:15:07 +0000 |
commit | ff11a79878a8b43394b296c06557033efd17b1ee (patch) | |
tree | 38cbc35aa1a528841635753dc0057fc7a2568602 /arch/arm64/boot/dts/qcom/sc7180-idp.dts | |
parent | arm64: dts: qcom: trogdor: Add labels for type-c ports (diff) | |
download | linux-dev-ff11a79878a8b43394b296c06557033efd17b1ee.tar.xz linux-dev-ff11a79878a8b43394b296c06557033efd17b1ee.zip |
arm64: dts: qcom: sc7180: Improve the uart3 pin config for sc7180-idp
Remove output-high from CTS and TX as this is not really required. During
bringup to fix transfer failures this was added to match with console uart
settings. Probably some boot loader config was missing then. As it is
working fine now, remove it.
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/1600091917-7464-2-git-send-email-skakit@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sc7180-idp.dts')
-rw-r--r-- | arch/arm64/boot/dts/qcom/sc7180-idp.dts | 10 |
1 files changed, 4 insertions, 6 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index d033b3aad54e..cd8e6fa3301d 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -473,32 +473,30 @@ &qup_uart3_default { pinconf-cts { /* - * Configure a pull-down on 38 (CTS) to match the pull of + * Configure a pull-down on CTS to match the pull of * the Bluetooth module. */ pins = "gpio38"; bias-pull-down; - output-high; }; pinconf-rts { - /* We'll drive 39 (RTS), so no pull */ + /* We'll drive RTS, so no pull */ pins = "gpio39"; drive-strength = <2>; bias-disable; }; pinconf-tx { - /* We'll drive 40 (TX), so no pull */ + /* We'll drive TX, so no pull */ pins = "gpio40"; drive-strength = <2>; bias-disable; - output-high; }; pinconf-rx { /* - * Configure a pull-up on 41 (RX). This is needed to avoid + * Configure a pull-up on RX. This is needed to avoid * garbage data when the TX pin of the Bluetooth module is * in tri-state (module powered off or not driving the * signal yet). |