Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM device-tree updates from Arnd Bergmann:
 "We add device tree files for a couple of additional SoCs in various
  areas:

  Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for
  networking, Amlogic A113D for audio, and Renesas R-Car V3M for
  automotive.

  As usual, lots of new boards get added based on those and other SoCs:

   - Actions S500 based CubieBoard6 single-board computer

   - Amlogic Meson-AXG A113D based development board
   - Amlogic S912 based Khadas VIM2 single-board computer
   - Amlogic S912 based Tronsmart Vega S96 set-top-box

   - Allwinner H5 based NanoPi NEO Plus2 single-board computer
   - Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers
   - Allwinner A83T based TBS A711 Tablet

   - Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8
   - Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500
     wireless access points and routers

   - NXP i.MX51 based Zodiac Inflight Innovations RDU1 board
   - NXP i.MX53 based GE Healthcare PPD biometric monitor
   - NXP i.MX6 based Pistachio single-board computer
   - NXP i.MX6 based Vining-2000 automotive diagnostic interface
   - NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants

   - Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone
   - Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet

   - Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA

   - Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board
   - Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards
   - Renasas r8a7745 based iWave G22D-SODIMM SoM

   - Rockchip rk3288 based Amarula Vyasa single-board computer

   - Samsung Exynos5800 based Odroid HC1 single-board computer

  For existing SoC support, there was a lot of ongoing work, as usual
  most of that concentrated on the Renesas, Rockchip, OMAP, i.MX,
  Amlogic and Allwinner platforms, but others were also active.

  Rob Herring and many others worked on reducing the number of issues
  that the latest version of 'dtc' now warns about. Unfortunately there
  is still a lot left to do.

  A rework of the ARM foundation model introduced several new files for
  common variations of the model"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits)
  arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3
  dt-bindings: bus: Add documentation for the Technologic Systems NBUS
  arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock
  ARM: dts: owl-s500: Add CubieBoard6
  dt-bindings: arm: actions: Add CubieBoard6
  ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock
  ARM: dts: owl-s500: Set power domains for CPU2 and CPU3
  arm: dts: mt7623: remove unused compatible string for pio node
  arm: dts: mt7623: update usb related nodes
  arm: dts: mt7623: update crypto node
  ARM: dts: sun8i: a711: Enable USB OTG
  ARM: dts: sun8i: a711: Add regulator support
  ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1
  ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1
  ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file
  ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes
  ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes
  ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes
  ARM: dts: sunxi: Add dtsi for AXP81x PMIC
  arm64: dts: allwinner: H5: Restore EMAC changes
  ...

5 files changed, 590 insertions, 18 deletions

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 1d63e6b879de..33a3297eb284 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -19,6 +19,30 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/sound/apq8016-lpass.h>
 
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (pin out but not routed from the chip to
+ *              anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Line names are taken from the schematic "DragonBoard410c"
+ * dated monday, august 31, 2015. Page 5 in particular.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+
 / {
 	aliases {
 		serial0 = &blsp1_uart2;
@@ -47,6 +71,132 @@
 	};
 
 	soc {
+		pinctrl@1000000 {
+			gpio-line-names =
+				"[UART0_TX]", /* GPIO_0, LSEC pin 5 */
+				"[UART0_RX]", /* GPIO_1, LSEC pin 7 */
+				"[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */
+				"[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */
+				"[UART1_TX]", /* GPIO_4, LSEC pin 11 */
+				"[UART1_RX]", /* GPIO_5, LSEC pin 13 */
+				"[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */
+				"[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */
+				"[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */
+				"[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */
+				"[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */
+				"[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */
+				"GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */
+				"GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */
+				"[I2C3_SDA]", /* HSEC pin 38 */
+				"[I2C3_SCL]", /* HSEC pin 36 */
+				"[SPI0_MOSI]", /* LSEC pin 14 */
+				"[SPI0_MISO]", /* LSEC pin 10 */
+				"[SPI0_CS_N]", /* LSEC pin 12 */
+				"[SPI0_CLK]", /* LSEC pin 8 */
+				"HDMI_HPD_N", /* GPIO 20 */
+				"USR_LED_1_CTRL",
+				"[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */
+				"[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */
+				"GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */
+				"GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */
+				"[CSI0_MCLK]", /* HSEC pin 15 */
+				"[CSI1_MCLK]", /* HSEC pin 17 */
+				"GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */
+				"[I2C2_SDA]", /* HSEC pin 34 */
+				"[I2C2_SCL]", /* HSEC pin 32 */
+				"DSI2HDMI_INT_N",
+				"DSI_SW_SEL_APQ",
+				"GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */
+				"GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */
+				"GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */
+				"GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */
+				"FORCED_USB_BOOT",
+				"SD_CARD_DET_N",
+				"[WCSS_BT_SSBI]",
+				"[WCSS_WLAN_DATA_2]", /* GPIO 40 */
+				"[WCSS_WLAN_DATA_1]",
+				"[WCSS_WLAN_DATA_0]",
+				"[WCSS_WLAN_SET]",
+				"[WCSS_WLAN_CLK]",
+				"[WCSS_FM_SSBI]",
+				"[WCSS_FM_SDI]",
+				"[WCSS_BT_DAT_CTL]",
+				"[WCSS_BT_DAT_STB]",
+				"NC",
+				"NC", /* GPIO 50 */
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC", /* GPIO 60 */
+				"NC",
+				"NC",
+				"[CDC_PDM0_CLK]",
+				"[CDC_PDM0_SYNC]",
+				"[CDC_PDM0_TX0]",
+				"[CDC_PDM0_RX0]",
+				"[CDC_PDM0_RX1]",
+				"[CDC_PDM0_RX2]",
+				"GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */
+				"NC", /* GPIO 70 */
+				"NC",
+				"NC",
+				"NC",
+				"NC", /* GPIO 74 */
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"BOOT_CONFIG_0", /* GPIO 80 */
+				"BOOT_CONFIG_1",
+				"BOOT_CONFIG_2",
+				"BOOT_CONFIG_3",
+				"NC",
+				"NC",
+				"BOOT_CONFIG_5",
+				"NC",
+				"NC",
+				"NC",
+				"NC", /* GPIO 90 */
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC",
+				"NC", /* GPIO 100 */
+				"NC",
+				"NC",
+				"NC",
+				"SSBI_GPS",
+				"NC",
+				"NC",
+				"KEY_VOLP_N",
+				"NC",
+				"NC",
+				"[LS_EXP_MI2S_WS]", /* GPIO 110 */
+				"NC",
+				"NC",
+				"[LS_EXP_MI2S_SCK]",
+				"[LS_EXP_MI2S_DATA0]",
+				"GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */
+				"NC",
+				"[DSI2HDMI_MI2S_WS]",
+				"[DSI2HDMI_MI2S_SCK]",
+				"[DSI2HDMI_MI2S_DATA0]",
+				"USR_LED_2_CTRL", /* GPIO 120 */
+				"SB_HS_ID";
+		};
+
 		dma@7884000 {
 			status = "okay";
 		};
@@ -192,7 +342,7 @@
 			};
 		};
 
-		sdhci@07824000 {
+		sdhci@7824000 {
 			vmmc-supply = <&pm8916_l8>;
 			vqmmc-supply = <&pm8916_l5>;
 
@@ -202,7 +352,7 @@
 			status = "okay";
 		};
 
-		sdhci@07864000 {
+		sdhci@7864000 {
 			vmmc-supply = <&pm8916_l11>;
 			vqmmc-supply = <&pm8916_l12>;
 
@@ -232,7 +382,7 @@
 			};
 		};
 
-		lpass@07708000 {
+		lpass@7708000 {
 			status = "okay";
 		};
 
@@ -329,6 +479,25 @@
                         };
                 };
 
+		spmi@200f000 {
+			pm8916@0 {
+				gpios@c000 {
+					gpio-line-names =
+						"USR_LED_3_CTRL",
+						"USR_LED_4_CTRL",
+						"USB_HUB_RESET_N_PM",
+						"USB_SW_SEL_PM";
+				};
+				mpps@a000 {
+					gpio-line-names =
+						"VDD_PX_BIAS",
+						"WLAN_LED_CTRL",
+						"BT_LED_CTRL",
+						"GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */
+				};
+			};
+		};
+
 		wcnss@a21b000 {
 			status = "okay";
 		};
@@ -379,6 +548,8 @@
         status = "okay";
         clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
         clock-names = "mclk";
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
 };
 
 &smd_rpm_regulators {
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 789f3e87321e..492a011f14f6 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -51,31 +51,31 @@
 			pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
 		};
 
-		i2c@07577000 {
+		i2c@7577000 {
 		/* On Low speed expansion */
 			label = "LS-I2C0";
 			status = "okay";
 		};
 
-		i2c@075b6000 {
+		i2c@75b6000 {
 		/* On Low speed expansion */
 			label = "LS-I2C1";
 			status = "okay";
 		};
 
-		spi@07575000 {
+		spi@7575000 {
 		/* On Low speed expansion */
 			label = "LS-SPI0";
 			status = "okay";
 		};
 
-		i2c@075b5000 {
+		i2c@75b5000 {
 		/* On High speed expansion */
 			label = "HS-I2C2";
 			status = "okay";
 		};
 
-		spi@075ba000{
+		spi@75ba000{
 		/* On High speed expansion */
 			label = "HS-SPI1";
 			status = "okay";
@@ -138,6 +138,22 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&usb2_vbus_det_gpio>;
 		};
+
+		agnoc@0 {
+			qcom,pcie@00600000 {
+				perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+			};
+
+			qcom,pcie@00608000 {
+				status = "okay";
+				perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
+			};
+
+			qcom,pcie@00610000 {
+				status = "okay";
+				perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
+			};
+		};
 	};
 
 
@@ -173,9 +189,15 @@
 					regulator-min-microvolt = <1300000>;
 					regulator-max-microvolt = <1300000>;
 				};
+
+				/**
+				 * 1.8v required on LS expansion
+				 * for mezzanine boards
+				 */
 				s4 {
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
 				};
 				s5 {
 					regulator-min-microvolt = <2150000>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index dc3817593e14..6b2127a6ced1 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -69,8 +69,11 @@
 		};
 
 		rmtfs@86700000 {
+			compatible = "qcom,rmtfs-mem";
 			reg = <0x0 0x86700000 0x0 0xe0000>;
 			no-map;
+
+			qcom,client-id = <1>;
 		};
 
 		rfsa@867e00000 {
@@ -257,6 +260,8 @@
 			clocks = <&gcc GCC_CRYPTO_CLK>, <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>;
 			clock-names = "core", "bus", "iface";
 			#reset-cells = <1>;
+
+			qcom,dload-mode = <&tcsr 0x6100>;
 		};
 	};
 
@@ -495,7 +500,7 @@
 			status = "disabled";
 		};
 
-		lpass: lpass@07708000 {
+		lpass: lpass@7708000 {
 			status = "disabled";
 			compatible = "qcom,lpass-cpu-apq8016";
 			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
@@ -530,7 +535,7 @@
 			#sound-dai-cells = <1>;
                 };
 
-		sdhc_1: sdhci@07824000 {
+		sdhc_1: sdhci@7824000 {
 			compatible = "qcom,sdhci-msm-v4";
 			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
 			reg-names = "hc_mem", "core_mem";
@@ -547,7 +552,7 @@
 			status = "disabled";
 		};
 
-		sdhc_2: sdhci@07864000 {
+		sdhc_2: sdhci@7864000 {
 			compatible = "qcom,sdhci-msm-v4";
 			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
 			reg-names = "hc_mem", "core_mem";
@@ -814,7 +819,7 @@
 
 			mdp: mdp@1a01000 {
 				compatible = "qcom,mdp5";
-				reg = <0x1a01000 0x90000>;
+				reg = <0x1a01000 0x89000>;
 				reg-names = "mdp_phys";
 
 				interrupt-parent = <&mdss>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
index 659940434842..c5c42e94f387 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
@@ -300,4 +300,199 @@
 			drive-strength = <2>;	/* 2 MA */
 		};
 	};
+
+	pcie0_clkreq_default: pcie0_clkreq_default {
+		mux {
+			pins = "gpio36";
+			function = "pci_e0";
+		};
+
+		config {
+			pins = "gpio36";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_perst_default: pcie0_perst_default {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	pcie0_wake_default: pcie0_wake_default {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_clkreq_sleep: pcie0_clkreq_sleep {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	pcie0_wake_sleep: pcie0_wake_sleep {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	pcie1_clkreq_default: pcie1_clkreq_default {
+		mux {
+			pins = "gpio131";
+			function = "pci_e1";
+		};
+
+		config {
+			pins = "gpio131";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_perst_default: pcie1_perst_default {
+		mux {
+			pins = "gpio130";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio130";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	pcie1_wake_default: pcie1_wake_default {
+		mux {
+			pins = "gpio132";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio132";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	pcie1_clkreq_sleep: pcie1_clkreq_sleep {
+		mux {
+			pins = "gpio131";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio131";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	pcie1_wake_sleep: pcie1_wake_sleep {
+		mux {
+			pins = "gpio132";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio132";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	pcie2_clkreq_default: pcie2_clkreq_default {
+		mux {
+			pins = "gpio115";
+			function = "pci_e2";
+		};
+
+		config {
+			pins = "gpio115";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie2_perst_default: pcie2_perst_default {
+		mux {
+			pins = "gpio114";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio114";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	pcie2_wake_default: pcie2_wake_default {
+		mux {
+			pins = "gpio116";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio116";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	pcie2_clkreq_sleep: pcie2_clkreq_sleep {
+		mux {
+			pins = "gpio115";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio115";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	pcie2_wake_sleep: pcie2_wake_sleep {
+		mux {
+			pins = "gpio116";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio116";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 887b61c872dd..4b2afcc4fdf4 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8996.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. MSM8996";
@@ -261,6 +262,8 @@
 	firmware {
 		scm {
 			compatible = "qcom,scm-msm8996";
+
+			qcom,dload-mode = <&tcsr 0x13000>;
 		};
 	};
 
@@ -289,6 +292,11 @@
 			compatible = "qcom,rpm-msm8996";
 			qcom,glink-channels = "rpm_requests";
 
+			rpmcc: qcom,rpmcc {
+				compatible = "qcom,rpmcc-msm8996";
+				#clock-cells = <1>;
+			};
+
 			pm8994-regulators {
 				compatible = "qcom,rpm-pm8994-regulators";
 
@@ -358,6 +366,11 @@
 			reg = <0x740000 0x20000>;
 		};
 
+		tcsr: syscon@7a0000 {
+			compatible = "qcom,tcsr-msm8996", "syscon";
+			reg = <0x7a0000 0x18000>;
+		};
+
 		intc: interrupt-controller@9bc0000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
@@ -395,7 +408,7 @@
 			#clock-cells = <1>;
 		};
 
-		blsp1_spi0: spi@07575000 {
+		blsp1_spi0: spi@7575000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			reg = <0x07575000 0x600>;
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -410,7 +423,7 @@
 			status = "disabled";
 		};
 
-		blsp2_i2c0: i2c@075b5000 {
+		blsp2_i2c0: i2c@75b5000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x075b5000 0x1000>;
 			interrupts = <GIC_SPI 101 0>;
@@ -441,7 +454,7 @@
 			status = "disabled";
 		};
 
-		blsp2_i2c1: i2c@075b6000 {
+		blsp2_i2c1: i2c@75b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x075b6000 0x1000>;
 			interrupts = <GIC_SPI 102 0>;
@@ -466,7 +479,7 @@
 			status = "disabled";
 		};
 
-		blsp1_i2c2: i2c@07577000 {
+		blsp1_i2c2: i2c@7577000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07577000 0x1000>;
 			interrupts = <GIC_SPI 97 0>;
@@ -481,7 +494,7 @@
 			status = "disabled";
 		};
 
-		blsp2_spi5: spi@075ba000{
+		blsp2_spi5: spi@75ba000{
 			compatible = "qcom,spi-qup-v2.2.1";
 			reg = <0x075ba000 0x600>;
 			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
@@ -522,7 +535,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		timer@09840000 {
+		timer@9840000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -819,6 +832,172 @@
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
+
+		agnoc@0 {
+			power-domains = <&gcc AGGRE0_NOC_GDSC>;
+			compatible = "simple-pm-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pcie0: qcom,pcie@00600000 {
+				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+				status = "disabled";
+				power-domains = <&gcc PCIE0_GDSC>;
+				bus-range = <0x00 0xff>;
+				num-lanes = <1>;
+
+				reg = <0x00600000 0x2000>,
+				      <0x0c000000 0xf1d>,
+				      <0x0c000f20 0xa8>,
+				      <0x0c100000 0x100000>;
+				reg-names = "parf", "dbi", "elbi","config";
+
+				phys = <&pciephy_0>;
+				phy-names = "pciephy";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>,
+					<0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
+
+				interrupts = <GIC_SPI 405 IRQ_TYPE_NONE>;
+				interrupt-names = "msi";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0x7>;
+				interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>;
+				pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>;
+
+
+				vdda-supply = <&pm8994_l28>;
+
+				linux,pci-domain = <0>;
+
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+					<&gcc GCC_PCIE_0_AUX_CLK>,
+					<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+					<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+					<&gcc GCC_PCIE_0_SLV_AXI_CLK>;
+
+				clock-names =  "pipe",
+						"aux",
+						"cfg",
+						"bus_master",
+						"bus_slave";
+
+			};
+
+			pcie1: qcom,pcie@00608000 {
+				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+				power-domains = <&gcc PCIE1_GDSC>;
+				bus-range = <0x00 0xff>;
+				num-lanes = <1>;
+
+				status  = "disabled";
+
+				reg = <0x00608000 0x2000>,
+				      <0x0d000000 0xf1d>,
+				      <0x0d000f20 0xa8>,
+				      <0x0d100000 0x100000>;
+
+				reg-names = "parf", "dbi", "elbi","config";
+
+				phys = <&pciephy_1>;
+				phy-names = "pciephy";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>,
+					<0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
+
+				interrupts = <GIC_SPI 413 IRQ_TYPE_NONE>;
+				interrupt-names = "msi";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0x7>;
+				interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>;
+				pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>;
+
+
+				vdda-supply = <&pm8994_l28>;
+				linux,pci-domain = <1>;
+
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+					<&gcc GCC_PCIE_1_AUX_CLK>,
+					<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+					<&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+					<&gcc GCC_PCIE_1_SLV_AXI_CLK>;
+
+				clock-names =  "pipe",
+						"aux",
+						"cfg",
+						"bus_master",
+						"bus_slave";
+			};
+
+			pcie2: qcom,pcie@00610000 {
+				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+				power-domains = <&gcc PCIE2_GDSC>;
+				bus-range = <0x00 0xff>;
+				num-lanes = <1>;
+				status = "disabled";
+				reg = <0x00610000 0x2000>,
+				      <0x0e000000 0xf1d>,
+				      <0x0e000f20 0xa8>,
+				      <0x0e100000 0x100000>;
+
+				reg-names = "parf", "dbi", "elbi","config";
+
+				phys = <&pciephy_2>;
+				phy-names = "pciephy";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>,
+					<0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
+
+				device_type = "pci";
+
+				interrupts = <GIC_SPI 421 IRQ_TYPE_NONE>;
+				interrupt-names = "msi";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0x7>;
+				interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>;
+				pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >;
+
+				vdda-supply = <&pm8994_l28>;
+
+				linux,pci-domain = <2>;
+				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
+					<&gcc GCC_PCIE_2_AUX_CLK>,
+					<&gcc GCC_PCIE_2_CFG_AHB_CLK>,
+					<&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
+					<&gcc GCC_PCIE_2_SLV_AXI_CLK>;
+
+				clock-names =  "pipe",
+						"aux",
+						"cfg",
+						"bus_master",
+						"bus_slave";
+			};
+		};
 	};
 
 	adsp-pil {