diff options
| author |   Linus Torvalds <torvalds@linux-foundation.org> | 2022-08-02 08:15:25 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-08-02 08:15:25 -0700 |
| commit | 3976d758e045ed0485e0e665fb3b6692572576d7 (patch) | |
| tree | 11918dfab24b4daa98293d49dc089809b5dd6e92 /arch/arm64/boot/dts | |
| parent | Merge tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc (diff) | |
| parent | dt-bindings: soc: bcm: use absolute path to other schema (diff) | |
| download | linux-dev-3976d758e045ed0485e0e665fb3b6692572576d7.tar.xz linux-dev-3976d758e045ed0485e0e665fb3b6692572576d7.zip | |
Merge tag 'arm-dt-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM DT updates from Arnd Bergmann:
"As usual, the bulk of the changes for the SoC tree are devicetree file
updates, and most of these changes are for 64-bit embedded machines.
As before, there are a ton of style cleanups, and additional hardware
support for existing machines.
Looking only at the new SoC, the notable additions are:
- A whole family of Broadcom broadband SoCs, both 32-bit and 64-bit:
BCM63178, BCM63158, BCM4912, BCM6858, BCM6878, BCM6846, BCM63146,
BCM6856, BCM6855, BCM6756, BCM63148, and BCM6813. Each SoC comes
with a corresponding reference board.
- The new NXP i.MX93 SoC, the follow-up to the popular i.MX6 and
i.MX8 embedded SoCs, now using Cortex-A55 cores and the Ethos-U65
NPU.
- Qualcomm Snapdragon 8cx Gen3 (SC8280XP), the current high end of
Arm based Laptop SoCs, and its automotive cousin, the SA8540P. The
SC8280XP is used in the Lenovo Thinkpad X13s laptop that also gets
added here in addition to the reference boards.
- Allwinner H616, a newer version of the H6 SoC, targeted at
Set-top-box applications. It comes with dts files for the Orange Pi
zero2 single-board computer and the X96 Mate set-top-box
- Marvell Prestera 98DX2530 (AlleyCat5), a network switch chip in the
Armada SoC family based on the Cortex-A55 core.
New machines based on previously supported SoCs include:
- Several new machines on NXP i.MX platforms: multiple Toradex
Colibri boards using the "Iris" and "Ixora" carriers, DH
electronics i.MX8M Plus DHCOM and PDK2, TQ-Systems TQMa8MPQL, and
phytech phyBOARD-Polis-i.MX8MM.
- Google Chameleon v3 FPGA board based on Intel Arria10 and Stratix
10 Software Virtual platform, both in the SoCFPGA platform.
- Two new wireless devices based on Broadcom SoCs: The Asus GT-AX6000
Router and the Cisco Meraki MR26 access point
- Improved Chromebook support for both the Mediatek and Qualcomm SoC
families brought added machines: Acer Chromebook 514 (MT8192), Acer
Chromebook Spin 513 (MT8195) and a couple of SC7180 based machines
including the Lenovo IdeaPad Chromebook Duet 3.
- Xiaomi Mi Mix2s, LG G7 and LG V35 are mobile phones based on
Qualcomm SDM845, while Mi 5s Plus is based on MSM8996.
- Finally, there are a few development board on other chips: PCB8309
(Microchip lan966x), Radxa Rock Pi S (Rockchips RK3308) DH DRC
Compact (ST STM32MP1) and Inforce IFC6560 (Qualcomm SDM660)"
* tag 'arm-dt-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (829 commits)
dt-bindings: soc: bcm: use absolute path to other schema
dt-bindings: soc: bcm: drop quotes when not needed
dt-bindings: soc: microchip: use absolute path to other schema
dt-bindings: soc: microchip: drop quotes when not needed
ARM: dts: lan966x: keep lan966 entries alphabetically sorted
ARM: dts: lan966x: add support for pcb8309
dt-bindings: arm: at91: add lan966 pcb8309 board
ARM: dts: lan966x: Enable network driver on pcb8291
ARM: dts: lan966x: Disable can0 on pcb8291
ARM: dts: lan966x: Add gpio-restart
dt-bindings: arm: aspeed: add Aspeed Evaluation boards
arm64: dts: qcom: Add support for Xiaomi Mi Mix2s
dt-bindings: arm: qcom: Add Xiaomi Mi Mix2s bindings
dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices
dt-bindings: arm: qcom: add missing SM6350 board compatibles
dt-bindings: arm: qcom: add missing SM6125 board compatibles
dt-bindings: arm: qcom: add missing SDM845 board compatibles
dt-bindings: arm: qcom: add missing SDM636 board compatibles
dt-bindings: arm: qcom: add missing SDM630 board compatibles
dt-bindings: arm: qcom: add missing QCS404 board compatibles
...
Diffstat (limited to 'arch/arm64/boot/dts')
453 files changed, 25481 insertions, 2664 deletions
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 8fa5c060a4fe..6a96494a2e0a 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -38,3 +38,5 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi index f6d7d7f7fdab..548539c93ab0 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi @@ -203,6 +203,7 @@ i2c0: i2c@5002000 { compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun8i-v536-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x05002000 0x400>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; @@ -215,6 +216,7 @@ i2c1: i2c@5002400 { compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun8i-v536-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x05002400 0x400>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; @@ -227,6 +229,7 @@ i2c2: i2c@5002800 { compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun8i-v536-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x05002800 0x400>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; @@ -239,6 +242,7 @@ i2c3: i2c@5002c00 { compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun8i-v536-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x05002c00 0x400>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; @@ -315,6 +319,7 @@ r_i2c0: i2c@7081400 { compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun8i-v536-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x07081400 0x400>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; @@ -329,6 +334,7 @@ r_i2c1: i2c@7081800 { compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun8i-v536-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x07081800 0x400>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts index f17cc89f472d..8233582f6288 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts @@ -58,7 +58,7 @@ wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* WL-PMU-EN: PL2 */ }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 997a19372683..e6d5bc0f7a61 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -56,7 +56,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; }; @@ -355,7 +355,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_dldo2>; vddio-supply = <®_dldo4>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts index e47ff06a6fa9..0af6dcdf7515 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts @@ -43,7 +43,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index c519d9fa6967..4f8529d5ac00 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -40,7 +40,7 @@ leds { compatible = "gpio-leds"; - status { + led-0 { label = "orangepi:green:status"; gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ }; @@ -71,7 +71,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; }; @@ -369,7 +369,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; max-speed = <1500000>; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_dldo2>; vddio-supply = <®_dldo4>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index 63571df24da4..620cb3ef5f6c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -35,10 +35,10 @@ stdout-path = "serial0:115200n8"; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - lid_switch { + lid-switch { label = "Lid Switch"; gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */ linux,input-type = <EV_SW>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts index fb65319a3bd3..219f720b8b7d 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts @@ -10,6 +10,10 @@ compatible = "pine64,pinephone-1.0", "pine64,pinephone", "allwinner,sun50i-a64"; }; +&codec_analog { + allwinner,internal-bias-resistor; +}; + &sgm3140 { enable-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */ flash-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts index 5e59d3752178..723af64a9cee 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts @@ -29,6 +29,10 @@ default-brightness-level = <400>; }; +&codec_analog { + allwinner,internal-bias-resistor; +}; + &sgm3140 { enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */ diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index de77c87481fd..77b5349f6087 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -4,6 +4,7 @@ // Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> #include <dt-bindings/clock/sun50i-a64-ccu.h> +#include <dt-bindings/clock/sun6i-rtc.h> #include <dt-bindings/clock/sun8i-de2.h> #include <dt-bindings/clock/sun8i-r-ccu.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -660,7 +661,7 @@ ccu: clock@1c20000 { compatible = "allwinner,sun50i-a64-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&rtc 0>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -673,7 +674,8 @@ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; @@ -1226,7 +1228,7 @@ reg-io-width = <1>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, - <&ccu CLK_HDMI>, <&rtc 0>; + <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>; clock-names = "iahb", "isfr", "tmds", "cec"; resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; @@ -1287,7 +1289,7 @@ r_ccu: clock@1f01400 { compatible = "allwinner,sun50i-a64-r-ccu"; reg = <0x01f01400 0x100>; - clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, + clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>, <&ccu CLK_PLL_PERIPH0>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts index 55b369534a08..a3e040da38a0 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts @@ -52,10 +52,10 @@ }; }; - r-gpio-keys { + gpio-keys { compatible = "gpio-keys"; - reset { + key-reset { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts index 1010c1b22d2e..b5c1ff19b4c4 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -54,10 +54,10 @@ }; }; - r-gpio-keys { + gpio-keys { compatible = "gpio-keys"; - sw4 { + key-sw4 { label = "sw4"; linux,code = <BTN_0>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts index 74e0444af19b..d7f8bad6bb98 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts @@ -48,10 +48,10 @@ }; }; - r-gpio-keys { + gpio-keys { compatible = "gpio-keys"; - sw4 { + key-sw4 { label = "sw4"; linux,code = <BTN_0>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts index c45d7b7fb39a..6fc65e8db220 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts @@ -86,7 +86,7 @@ wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ post-power-on-delay-ms = <200>; @@ -314,7 +314,7 @@ bluetooth { compatible = "brcm,bcm4345c5"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */ diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts index e8770858b5d0..fb31dcb1cb6d 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts @@ -13,7 +13,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ post-power-on-delay-ms = <200>; @@ -64,7 +64,7 @@ bluetooth { compatible = "brcm,bcm4345c5"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */ diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi index edb71e4a0304..4903d6358112 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi @@ -78,7 +78,7 @@ wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index fbe94abbb1f9..5a28303d3d4c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/sun50i-h6-ccu.h> #include <dt-bindings/clock/sun50i-h6-r-ccu.h> +#include <dt-bindings/clock/sun6i-rtc.h> #include <dt-bindings/clock/sun8i-de2.h> #include <dt-bindings/clock/sun8i-tcon-top.h> #include <dt-bindings/reset/sun50i-h6-ccu.h> @@ -237,7 +238,7 @@ ccu: clock@3001000 { compatible = "allwinner,sun50i-h6-ccu"; reg = <0x03001000 0x1000>; - clocks = <&osc24M>, <&rtc 0>, <&rtc 2>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>; clock-names = "hosc", "losc", "iosc"; #clock-cells = <1>; #reset-cells = <1>; @@ -317,7 +318,7 @@ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc 0>; + clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; @@ -725,7 +726,7 @@ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_XHCI>, <&ccu CLK_BUS_XHCI>, - <&rtc 0>; + <&rtc CLK_OSC32K>; clock-names = "ref", "bus_early", "suspend"; resets = <&ccu RST_BUS_XHCI>; /* @@ -931,7 +932,7 @@ r_ccu: clock@7010000 { compatible = "allwinner,sun50i-h6-r-ccu"; reg = <0x07010000 0x400>; - clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, + clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>, <&ccu CLK_PLL_PERIPH0>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; @@ -960,7 +961,8 @@ interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&rtc 0>; + clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts new file mode 100644 index 000000000000..02893f3ac99d --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts @@ -0,0 +1,213 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2020 Arm Ltd. + */ + +/dts-v1/; + +#include "sun50i-h616.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "OrangePi Zero2"; + compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616"; + + aliases { + ethernet0 = &emac0; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_RED>; + gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */ + default-state = "on"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */ + }; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply directly from the USB-C socket */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&emac0 { + pinctrl-names = "default"; + pinctrl-0 = <&ext_rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_dcdce>; + allwinner,rx-delay-ps = <3100>; + allwinner,tx-delay-ps = <700>; + status = "okay"; +}; + +&mdio0 { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mmc0 { + vmmc-supply = <®_dcdce>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + bus-width = <4>; + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp305: pmic@745 { + compatible = "x-powers,axp305", "x-powers,axp805", + "x-powers,axp806"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x745>; + + x-powers,self-working-mode; + vina-supply = <®_vcc5v>; + vinb-supply = <®_vcc5v>; + vinc-supply = <®_vcc5v>; + vind-supply = <®_vcc5v>; + vine-supply = <®_vcc5v>; + aldoin-supply = <®_vcc5v>; + bldoin-supply = <®_vcc5v>; + cldoin-supply = <®_vcc5v>; + + regulators { + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-sys"; + }; + + reg_aldo2: aldo2 { /* 3.3V on headers */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3-ext"; + }; + + reg_aldo3: aldo3 { /* 3.3V on headers */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3-ext2"; + }; + + reg_bldo1: bldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8"; + }; + + bldo2 { + /* unused */ + }; + + bldo3 { + /* unused */ + }; + + bldo4 { + /* unused */ + }; + + cldo1 { + /* reserved */ + }; + + cldo2 { + /* unused */ + }; + + cldo3 { + /* unused */ + }; + + reg_dcdca: dcdca { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdcc: dcdcc { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <990000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdcd: dcdcd { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-dram"; + }; + + reg_dcdce: dcdce { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-eth-mmc"; + }; + + sw { + /* unused */ + }; + }; + }; +}; + +&pio { + vcc-pc-supply = <®_aldo1>; + vcc-pf-supply = <®_aldo1>; + vcc-pg-supply = <®_bldo1>; + vcc-ph-supply = <®_aldo1>; + vcc-pi-supply = <®_aldo1>; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts new file mode 100644 index 000000000000..6619db34714a --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2021 Arm Ltd. + */ + +/dts-v1/; + +#include "sun50i-h616.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "X96 Mate"; + compatible = "hechuang,x96-mate", "allwinner,sun50i-h616"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply directly from the DC input */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&ir { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_dcdce>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + bus-width = <4>; + status = "okay"; +}; + +&mmc2 { + vmmc-supply = <®_dcdce>; + vqmmc-supply = <®_bldo1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp305: pmic@745 { + compatible = "x-powers,axp305", "x-powers,axp805", + "x-powers,axp806"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x745>; + + x-powers,self-working-mode; + vina-supply = <®_vcc5v>; + vinb-supply = <®_vcc5v>; + vinc-supply = <®_vcc5v>; + vind-supply = <®_vcc5v>; + vine-supply = <®_vcc5v>; + aldoin-supply = <®_vcc5v>; + bldoin-supply = <®_vcc5v>; + cldoin-supply = <®_vcc5v>; + + regulators { + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-sys"; + }; + + /* Enabled by the Android BSP */ + reg_aldo2: aldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3-ext"; + status = "disabled"; + }; + + /* Enabled by the Android BSP */ + reg_aldo3: aldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3-ext2"; + status = "disabled"; + }; + + reg_bldo1: bldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8"; + }; + + /* Enabled by the Android BSP */ + reg_bldo2: bldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8-2"; + status = "disabled"; + }; + + bldo3 { + /* unused */ + }; + + bldo4 { + /* unused */ + }; + + cldo1 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc2v5"; + }; + + cldo2 { + /* unused */ + }; + + cldo3 { + /* unused */ + }; + + reg_dcdca: dcdca { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdcc: dcdcc { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <990000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdcd: dcdcd { + regulator-always-on; + regulator-min-microvolt = <1360000>; + regulator-max-microvolt = <1360000>; + regulator-name = "vdd-dram"; + }; + + reg_dcdce: dcdce { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-eth-mmc"; + }; + + sw { + /* unused */ + }; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi new file mode 100644 index 000000000000..622a1f7d1641 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi @@ -0,0 +1,591 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Arm Ltd. +// based on the H6 dtsi, which is: +// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/sun50i-h616-ccu.h> +#include <dt-bindings/clock/sun50i-h6-r-ccu.h> +#include <dt-bindings/clock/sun6i-rtc.h> +#include <dt-bindings/reset/sun50i-h616-ccu.h> +#include <dt-bindings/reset/sun50i-h6-r-ccu.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0>; + enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <1>; + enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <2>; + enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <3>; + enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * 256 KiB reserved for Trusted Firmware-A (BL31). + * This is added by BL31 itself, but some bootloaders fail + * to propagate this into the DTB handed to kernels. + */ + secmon@40000000 { + reg = <0x0 0x40000000 0x0 0x40000>; + no-map; + }; + }; + + osc24M: osc24M-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + arm,no-tick-in-suspend; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x40000000>; + + syscon: syscon@3000000 { + compatible = "allwinner,sun50i-h616-system-control"; + reg = <0x03000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@28000 { + compatible = "mmio-sram"; + reg = <0x00028000 0x30000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00028000 0x30000>; + }; + }; + + ccu: clock@3001000 { + compatible = "allwinner,sun50i-h616-ccu"; + reg = <0x03001000 0x1000>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>; + clock-names = "hosc", "losc", "iosc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + watchdog: watchdog@30090a0 { + compatible = "allwinner,sun50i-h616-wdt", + "allwinner,sun6i-a31-wdt"; + reg = <0x030090a0 0x20>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + + pio: pinctrl@300b000 { + compatible = "allwinner,sun50i-h616-pinctrl"; + reg = <0x0300b000 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + ext_rgmii_pins: rgmii-pins { + pins = "PI0", "PI1", "PI2", "PI3", "PI4", + "PI5", "PI7", "PI8", "PI9", "PI10", + "PI11", "PI12", "PI13", "PI14", "PI15", + "PI16"; + function = "emac0"; + drive-strength = <40>; + }; + + i2c0_pins: i2c0-pins { + pins = "PI6", "PI7"; + function = "i2c0"; + }; + + i2c3_ph_pins: i2c3-ph-pins { + pins = "PH4", "PH5"; + function = "i2c3"; + }; + + ir_rx_pin: ir-rx-pin { + pins = "PH10"; + function = "ir_rx"; + }; + + mmc0_pins: mmc0-pins { + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; + }; + + /omit-if-no-ref/ + mmc1_pins: mmc1-pins { + pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc2_pins: mmc2-pins { + pins = "PC0", "PC1", "PC5", "PC6", + "PC8", "PC9", "PC10", "PC11", + "PC13", "PC14", "PC15", "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + + /omit-if-no-ref/ + spi0_pins: spi0-pins { + pins = "PC0", "PC2", "PC4"; + function = "spi0"; + }; + + /omit-if-no-ref/ + spi0_cs0_pin: spi0-cs0-pin { + pins = "PC3"; + function = "spi0"; + }; + + /omit-if-no-ref/ + spi1_pins: spi1-pins { + pins = "PH6", "PH7", "PH8"; + function = "spi1"; + }; + + /omit-if-no-ref/ + spi1_cs0_pin: spi1-cs0-pin { + pins = "PH5"; + function = "spi1"; + }; + + uart0_ph_pins: uart0-ph-pins { + pins = "PH0", "PH1"; + function = "uart0"; + }; + + /omit-if-no-ref/ + uart1_pins: uart1-pins { + pins = "PG6", "PG7"; + function = "uart1"; + }; + + /omit-if-no-ref/ + uart1_rts_cts_pins: uart1-rts-cts-pins { + pins = "PG8", "PG9"; + function = "uart1"; + }; + }; + + gic: interrupt-controller@3021000 { + compatible = "arm,gic-400"; + reg = <0x03021000 0x1000>, + <0x03022000 0x2000>, + <0x03024000 0x2000>, + <0x03026000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + mmc0: mmc@4020000 { + compatible = "allwinner,sun50i-h616-mmc", + "allwinner,sun50i-a100-mmc"; + reg = <0x04020000 0x1000>; + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + status = "disabled"; + max-frequency = <150000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-3_3v; + cap-sdio-irq; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@4021000 { + compatible = "allwinner,sun50i-h616-mmc", + "allwinner,sun50i-a100-mmc"; + reg = <0x04021000 0x1000>; + clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC1>; + reset-names = "ahb"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + status = "disabled"; + max-frequency = <150000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-3_3v; + cap-sdio-irq; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@4022000 { + compatible = "allwinner,sun50i-h616-emmc", + "allwinner,sun50i-a100-emmc"; + reg = <0x04022000 0x1000>; + clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC2>; + reset-names = "ahb"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + status = "disabled"; + max-frequency = <150000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-3_3v; + cap-sdio-irq; + #address-cells = <1>; + #size-cells = <0>; + }; + + uart0: serial@5000000 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; + status = "disabled"; + }; + + uart1: serial@5000400 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000400 0x400>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; + status = "disabled"; + }; + + uart2: serial@5000800 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000800 0x400>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; + status = "disabled"; + }; + + uart3: serial@5000c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000c00 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; + status = "disabled"; + }; + + uart4: serial@5001000 { + compatible = "snps,dw-apb-uart"; + reg = <0x05001000 0x400>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART4>; + resets = <&ccu RST_BUS_UART4>; + status = "disabled"; + }; + + uart5: serial@5001400 { + compatible = "snps,dw-apb-uart"; + reg = <0x05001400 0x400>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART5>; + resets = <&ccu RST_BUS_UART5>; + status = "disabled"; + }; + + i2c0: i2c@5002000 { + compatible = "allwinner,sun50i-h616-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002000 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@5002400 { + compatible = "allwinner,sun50i-h616-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002400 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@5002800 { + compatible = "allwinner,sun50i-h616-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002800 0x400>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c3: i2c@5002c00 { + compatible = "allwinner,sun50i-h616-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002c00 0x400>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C3>; + resets = <&ccu RST_BUS_I2C3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c4: i2c@5003000 { + compatible = "allwinner,sun50i-h616-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05003000 0x400>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C4>; + resets = <&ccu RST_BUS_I2C4>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi0: spi@5010000 { + compatible = "allwinner,sun50i-h616-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x05010000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@5011000 { + compatible = "allwinner,sun50i-h616-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x05011000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + emac0: ethernet@5020000 { + compatible = "allwinner,sun50i-h616-emac0", + "allwinner,sun50i-a64-emac"; + reg = <0x05020000 0x10000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&ccu CLK_BUS_EMAC0>; + clock-names = "stmmaceth"; + resets = <&ccu RST_BUS_EMAC0>; + reset-names = "stmmaceth"; + syscon = <&syscon>; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + rtc: rtc@7000000 { + compatible = "allwinner,sun50i-h616-rtc"; + reg = <0x07000000 0x400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_R_APB1_RTC>, <&osc24M>, + <&ccu CLK_PLL_SYSTEM_32K>; + clock-names = "bus", "hosc", + "pll-32k"; + #clock-cells = <1>; + }; + + r_ccu: clock@7010000 { + compatible = "allwinner,sun50i-h616-r-ccu"; + reg = <0x07010000 0x210>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>, + <&ccu CLK_PLL_PERIPH0>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + r_pio: pinctrl@7022000 { + compatible = "allwinner,sun50i-h616-r-pinctrl"; + reg = <0x07022000 0x400>; + clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, + <&rtc CLK_OSC32K>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + + /omit-if-no-ref/ + r_i2c_pins: r-i2c-pins { + pins = "PL0", "PL1"; + function = "s_i2c"; + }; + + r_rsb_pins: r-rsb-pins { + pins = "PL0", "PL1"; + function = "s_rsb"; + }; + }; + + ir: ir@7040000 { + compatible = "allwinner,sun50i-h616-ir", + "allwinner,sun6i-a31-ir"; + reg = <0x07040000 0x400>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_R_APB1_IR>, + <&r_ccu CLK_IR>; + clock-names = "apb", "ir"; + resets = <&r_ccu RST_R_APB1_IR>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_rx_pin>; + status = "disabled"; + }; + + r_i2c: i2c@7081400 { + compatible = "allwinner,sun50i-h616-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x07081400 0x400>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_R_APB2_I2C>; + resets = <&r_ccu RST_R_APB2_I2C>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + r_rsb: rsb@7083000 { + compatible = "allwinner,sun50i-h616-rsb", + "allwinner,sun8i-a23-rsb"; + reg = <0x07083000 0x400>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_R_APB2_RSB>; + clock-frequency = <3000000>; + resets = <&r_ccu RST_R_APB2_RSB>; + pinctrl-names = "default"; + pinctrl-0 = <&r_rsb_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/altera/Makefile b/arch/arm64/boot/dts/altera/Makefile index 4db83fbeb115..1bf0c472f6b4 100644 --- a/arch/arm64/boot/dts/altera/Makefile +++ b/arch/arm64/boot/dts/altera/Makefile @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_stratix10_socdk.dtb \ - socfpga_stratix10_socdk_nand.dtb + socfpga_stratix10_socdk_nand.dtb \ + socfpga_stratix10_swvp.dtb diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index aa2bba75265f..14c220d87807 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -97,6 +97,34 @@ <0x0 0xfffc6000 0x0 0x2000>; }; + clocks { + cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + cb_intosc_ls_clk: cb-intosc-ls-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + f2s_free_clk: f2s-free-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + osc1: osc1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + qspi_clk: qspi-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -119,34 +147,6 @@ #clock-cells = <1>; }; - clocks { - cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - }; - - cb_intosc_ls_clk: cb-intosc-ls-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - }; - - f2s_free_clk: f2s-free-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - }; - - osc1: osc1 { - #clock-cells = <0>; - compatible = "fixed-clock"; - }; - - qspi_clk: qspi-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <200000000>; - }; - }; - gmac0: ethernet@ff800000 { compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff800000 0x2000>; @@ -594,7 +594,7 @@ }; qspi: spi@ff8d2000 { - compatible = "intel,socfpga-qspi", "cdns,qspi-nor"; + compatible = "intel,socfpga-qspi", "cdns,qspi-nor"; #address-cells = <1>; #size-cells = <0>; reg = <0xff8d2000 0x100>, diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 5159cd5771dc..48424e459f12 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -52,12 +52,6 @@ }; soc { - clocks { - osc1 { - clock-frequency = <25000000>; - }; - }; - eccmgr { sdmmca-ecc@ff8c8c00 { compatible = "altr,socfpga-s10-sdmmc-ecc", @@ -113,6 +107,10 @@ bus-width = <4>; }; +&osc1 { + clock-frequency = <25000000>; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts index 0ab676c639a1..847a7c01f5af 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts @@ -52,12 +52,6 @@ }; soc { - clocks { - osc1 { - clock-frequency = <25000000>; - }; - }; - eccmgr { sdmmca-ecc@ff8c8c00 { compatible = "altr,socfpga-s10-sdmmc-ecc", @@ -126,6 +120,10 @@ }; }; +&osc1 { + clock-frequency = <25000000>; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts new file mode 100644 index 000000000000..a8db58573954 --- /dev/null +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022, Intel Corporation + */ + +#include "socfpga_stratix10.dtsi" + +/ { + model = "SOCFPGA Stratix 10 SWVP"; + compatible = "altr,socfpga-stratix10-swvp", "altr,socfpga-stratix10"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + + timer0 = &timer0; + timer1 = &timer1; + timer2 = &timer2; + timer3 = &timer3; + + ethernet0 = &gmac0; + ethernet1 = &gmac1; + ethernet2 = &gmac2; + }; + + chosen { + stdout-path = "serial1:115200n8"; + linux,initrd-start = <0x10000000>; + linux,initrd-end = <0x125c8324>; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&cpu0 { + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x0000fff8>; +}; + +&cpu1 { + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x0000fff8>; +}; + +&cpu2 { + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x0000fff8>; +}; + +&cpu3 { + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x0000fff8>; +}; + +&osc1 { + clock-frequency = <25000000>; +}; + +&gmac0 { + status = "okay"; + phy-mode = "rgmii"; + phy-addr = <0xffffffff>; + snps,max-mtu = <0x0>; +}; + +&gmac1 { + status = "okay"; + phy-mode = "rgmii"; + phy-addr = <0xffffffff>; +}; + +&gmac2 { + status = "okay"; + phy-mode = "rgmii"; + phy-addr = <0xffffffff>; +}; + +&mmc { + status = "okay"; + altr,dw-mshc-ciu-div = <0x3>; + altr,dw-mshc-sdr-timing = <0x0 0x3>; + cap-sd-highspeed; + cap-mmc-highspeed; + broken-cd; + bus-width = <4>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + clocks = <&clkmgr STRATIX10_L4_MP_CLK>; + status = "okay"; +}; + +&usb1 { + clocks = <&clkmgr STRATIX10_L4_MP_CLK>; + status = "okay"; +}; + +&rst { + altr,modrst-offset = <0x20>; +}; + +&sysmgr { + reg = <0xffd12000 0x1000>; + interrupts = <0x0 0x10 0x4>; + cpu1-start-addr = <0xffd06230>; +}; diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts index c290d1ce2b03..02bff65e5fd6 100644 --- a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts +++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts @@ -20,8 +20,8 @@ }; psci { - compatible = "arm,psci-0.2"; - method = "smc"; + compatible = "arm,psci-0.2"; + method = "smc"; }; }; diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts index e0926f6bb7c3..07dab1f1e3c8 100644 --- a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts +++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts @@ -20,8 +20,8 @@ }; psci { - compatible = "arm,psci-0.2"; - method = "smc"; + compatible = "arm,psci-0.2"; + method = "smc"; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 3f5254eeb47b..04f797b5a012 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -1535,7 +1535,7 @@ sysctrl_AO: sys-ctrl@0 { compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon"; - reg = <0x0 0x0 0x0 0x100>; + reg = <0x0 0x0 0x0 0x100>; clkc_AO: clock-controller { compatible = "amlogic,meson-axg-aoclkc"; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts index 6c7bfacbad78..1fa6e75abd21 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts @@ -20,10 +20,16 @@ rtc1 = &vrtc; }; + gpio_fan: gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; + /* Using Dummy Speed */ + gpio-fan,speed-map = <0 0>, <1 1>; + #cooling-cells = <2>; + }; + gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; power-button { @@ -96,6 +102,23 @@ status = "okay"; }; +&cpu_thermal { + trips { + cpu_active: cpu-active { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + }; + + cooling-maps { + map { + trip = <&cpu_active>; + cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + &frddr_a { status = "okay"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts index 707daf92787b..afe375fa83ca 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts @@ -21,8 +21,6 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; power-button { diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index aa14ea017a61..023a52005494 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -450,7 +450,7 @@ sysctrl_AO: sys-ctrl@0 { compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon"; - reg = <0x0 0x0 0x0 0x100>; + reg = <0x0 0x0 0x0 0x100>; clkc_AO: clock-controller { compatible = "amlogic,meson-gx-aoclkc"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts index e8394a8269ee..6d8cc00fedc7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts @@ -26,8 +26,6 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <20>; button-reset { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index f887bfb445fd..63137ce3cb9d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -42,11 +42,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + button { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts index 6eae692792ec..505ffcd8eb76 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts @@ -37,11 +37,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + button { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts index c529b6c860a4..a4fa186f0458 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts @@ -30,11 +30,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts index b2ab05c22090..c1470416faad 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts @@ -30,11 +30,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dts index 4b0ff707e21b..595b49085074 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dts @@ -16,11 +16,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <20>; - button@0 { + button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts index fcb304c5a40f..6831137c5c10 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts @@ -216,7 +216,7 @@ bluetooth { compatible = "realtek,rtl8822cs-bt"; - enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; host-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts index ebebf344b715..f5b3424c0f61 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts @@ -35,11 +35,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts index ea9f234d1fc7..b8ef3bd8b840 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts @@ -41,11 +41,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts index 8edbfe040805..d4858afa0e9c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts @@ -30,11 +30,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts index 1e7f77f9b533..f8c40340b9c5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts @@ -45,8 +45,6 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; button-power { diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index ff213618a598..ad50cba42d19 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -127,6 +127,12 @@ clocks = <&xtal>, <&xtal>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; + + reset: reset-controller@2000 { + compatible = "amlogic,meson-s4-reset"; + reg = <0x0 0x2000 0x0 0x98>; + #reset-cells = <1>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts index a5d79f2f7c19..603337ca5608 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -48,7 +48,7 @@ gpio-keys { compatible = "gpio-keys"; - key1 { + key-1 { label = "A"; linux,code = <BTN_0>; gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>; @@ -56,7 +56,7 @@ interrupts = <34 IRQ_TYPE_EDGE_BOTH>; }; - key2 { + key-2 { label = "B"; linux,code = <BTN_1>; gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>; @@ -64,7 +64,7 @@ interrupts = <35 IRQ_TYPE_EDGE_BOTH>; }; - key3 { + key-3 { label = "C"; linux,code = <BTN_2>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; @@ -72,7 +72,7 @@ interrupts = <2 IRQ_TYPE_EDGE_BOTH>; }; - mic_mute { + key-mic-mute { label = "MicMute"; linux,code = <SW_MUTE_DEVICE>; linux,input-type = <EV_SW>; @@ -81,7 +81,7 @@ interrupts = <99 IRQ_TYPE_EDGE_BOTH>; }; - power_key { + key-power { label = "PowerKey"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/apm/apm-merlin.dts b/arch/arm64/boot/dts/apm/apm-merlin.dts index 217d7728b63a..049e7a5edca7 100644 --- a/arch/arm64/boot/dts/apm/apm-merlin.dts +++ b/arch/arm64/boot/dts/apm/apm-merlin.dts @@ -22,7 +22,7 @@ gpio-keys { compatible = "gpio-keys"; - button@1 { + button { label = "POWER"; linux,code = <116>; linux,input-type = <0x1>; diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts index e927811ade28..efac50aeca64 100644 --- a/arch/arm64/boot/dts/apm/apm-mustang.dts +++ b/arch/arm64/boot/dts/apm/apm-mustang.dts @@ -22,7 +22,7 @@ gpio-keys { compatible = "gpio-keys"; - button@1 { + button { label = "POWER"; linux,code = <116>; linux,input-type = <0x1>; diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi index a83c82c50e29..a8526f8157ec 100644 --- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi +++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi @@ -597,11 +597,11 @@ interrupts = <0x0 0x4c 0x4>; }; - /* Do not change dwusb name, coded for backward compatibility */ - usb0: dwusb@19000000 { + /* Node-name might need to be coded as dwusb for backward compatibility */ + usb0: usb@19000000 { status = "disabled"; compatible = "snps,dwc3"; - reg = <0x0 0x19000000 0x0 0x100000>; + reg = <0x0 0x19000000 0x0 0x100000>; interrupts = <0x0 0x5d 0x4>; dma-coherent; dr_mode = "host"; diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index 0f37e77f5459..f56d687f772d 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -923,20 +923,20 @@ phy-names = "sata-phy"; }; - /* Do not change dwusb name, coded for backward compatibility */ - usb0: dwusb@19000000 { + /* Node-name might need to be coded as dwusb for backward compatibility */ + usb0: usb@19000000 { status = "disabled"; compatible = "snps,dwc3"; - reg = <0x0 0x19000000 0x0 0x100000>; + reg = <0x0 0x19000000 0x0 0x100000>; interrupts = <0x0 0x89 0x4>; dma-coherent; dr_mode = "host"; }; - usb1: dwusb@19800000 { + usb1: usb@19800000 { status = "disabled"; compatible = "snps,dwc3"; - reg = <0x0 0x19800000 0x0 0x100000>; + reg = <0x0 0x19800000 0x0 0x100000>; interrupts = <0x0 0x8a 0x4>; dma-coherent; dr_mode = "host"; diff --git a/arch/arm64/boot/dts/arm/fvp-base-revc.dts b/arch/arm64/boot/dts/arm/fvp-base-revc.dts index a496e39e6204..5f6f30c801a7 100644 --- a/arch/arm64/boot/dts/arm/fvp-base-revc.dts +++ b/arch/arm64/boot/dts/arm/fvp-base-revc.dts @@ -186,7 +186,7 @@ }; panel { - compatible = "arm,rtsm-display", "panel-dpi"; + compatible = "arm,rtsm-display"; port { panel_in: endpoint { remote-endpoint = <&clcd_pads>; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 065381c1cbf5..8d0d45d168d1 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -581,36 +581,36 @@ trig-conns@0 { reg = <0>; - arm,trig-in-sigs=<2 3>; - arm,trig-in-types=<SNK_FULL SNK_ACQCOMP>; - arm,trig-out-sigs=<0 1>; - arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>; + arm,trig-in-sigs = <2 3>; + arm,trig-in-types = <SNK_FULL SNK_ACQCOMP>; + arm,trig-out-sigs = <0 1>; + arm,trig-out-types = <SNK_FLUSHIN SNK_TRIGIN>; arm,cs-dev-assoc = <&etr_sys>; }; trig-conns@1 { reg = <1>; - arm,trig-in-sigs=<0 1>; - arm,trig-in-types=<SNK_FULL SNK_ACQCOMP>; - arm,trig-out-sigs=<7 6>; - arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>; + arm,trig-in-sigs = <0 1>; + arm,trig-in-types = <SNK_FULL SNK_ACQCOMP>; + arm,trig-out-sigs = <7 6>; + arm,trig-out-types = <SNK_FLUSHIN SNK_TRIGIN>; arm,cs-dev-assoc = <&etf_sys0>; }; trig-conns@2 { reg = <2>; - arm,trig-in-sigs=<4 5 6 7>; - arm,trig-in-types=<STM_TOUT_SPTE STM_TOUT_SW + arm,trig-in-sigs = <4 5 6 7>; + arm,trig-in-types = <STM_TOUT_SPTE STM_TOUT_SW STM_TOUT_HETE STM_ASYNCOUT>; - arm,trig-out-sigs=<4 5>; - arm,trig-out-types=<STM_HWEVENT STM_HWEVENT>; + arm,trig-out-sigs = <4 5>; + arm,trig-out-types = <STM_HWEVENT STM_HWEVENT>; arm,cs-dev-assoc = <&stm_sys>; }; trig-conns@3 { reg = <3>; - arm,trig-out-sigs=<2 3>; - arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>; + arm,trig-out-sigs = <2 3>; + arm,trig-out-types = <SNK_FLUSHIN SNK_TRIGIN>; arm,cs-dev-assoc = <&tpiu_sys>; }; }; @@ -628,24 +628,24 @@ trig-conns@0 { reg = <0>; - arm,trig-in-sigs=<0>; - arm,trig-in-types=<GEN_INTREQ>; - arm,trig-out-sigs=<0>; - arm,trig-out-types=<GEN_HALTREQ>; + arm,trig-in-sigs = <0>; + arm,trig-in-types = <GEN_INTREQ>; + arm,trig-out-sigs = <0>; + arm,trig-out-types = <GEN_HALTREQ>; arm,trig-conn-name = "sys_profiler"; }; trig-conns@1 { reg = <1>; - arm,trig-out-sigs=<2 3>; - arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-out-sigs = <2 3>; + arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>; arm,trig-conn-name = "watchdog"; }; trig-conns@2 { reg = <2>; - arm,trig-out-sigs=<1 6>; - arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-out-sigs = <1 6>; + arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>; arm,trig-conn-name = "g_counter"; }; }; diff --git a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi index 2e43f4531308..ba88d1596f6f 100644 --- a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi +++ b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi @@ -96,24 +96,24 @@ trig-conns@0 { reg = <0>; - arm,trig-in-sigs=<0 1>; - arm,trig-in-types=<SNK_FULL SNK_ACQCOMP>; - arm,trig-out-sigs=<0 1>; - arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>; + arm,trig-in-sigs = <0 1>; + arm,trig-in-types = <SNK_FULL SNK_ACQCOMP>; + arm,trig-out-sigs = <0 1>; + arm,trig-out-types = <SNK_FLUSHIN SNK_TRIGIN>; arm,cs-dev-assoc = <&etf_sys1>; }; trig-conns@1 { reg = <1>; - arm,trig-in-sigs=<2 3 4>; - arm,trig-in-types=<ELA_DBGREQ ELA_TSTART ELA_TSTOP>; + arm,trig-in-sigs = <2 3 4>; + arm,trig-in-types = <ELA_DBGREQ ELA_TSTART ELA_TSTOP>; arm,trig-conn-name = "ela_clus_0"; }; trig-conns@2 { reg = <2>; - arm,trig-in-sigs=<5 6 7>; - arm,trig-in-types=<ELA_DBGREQ ELA_TSTART ELA_TSTOP>; + arm,trig-in-sigs = <5 6 7>; + arm,trig-in-types = <ELA_DBGREQ ELA_TSTART ELA_TSTOP>; arm,trig-conn-name = "ela_clus_1"; }; }; diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index f099fb611d4e..6451c62146fd 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -192,6 +192,7 @@ cache-size = <0x200000>; cache-line-size = <64>; cache-sets = <2048>; + cache-level = <2>; }; A53_L2: l2-cache1 { @@ -199,6 +200,7 @@ cache-size = <0x100000>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; }; }; diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts index 709389582ae3..438cd1ff4bd0 100644 --- a/arch/arm64/boot/dts/arm/juno-r2.dts +++ b/arch/arm64/boot/dts/arm/juno-r2.dts @@ -198,6 +198,7 @@ cache-size = <0x200000>; cache-line-size = <64>; cache-sets = <2048>; + cache-level = <2>; }; A53_L2: l2-cache1 { @@ -205,6 +206,7 @@ cache-size = <0x100000>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; }; }; diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dtsi b/arch/arm64/boot/dts/arm/juno-scmi.dtsi index 4135d62e44a2..ec85cd2c733c 100644 --- a/arch/arm64/boot/dts/arm/juno-scmi.dtsi +++ b/arch/arm64/boot/dts/arm/juno-scmi.dtsi @@ -187,7 +187,6 @@ &mailbox { compatible = "arm,mhu-doorbell", "arm,primecell"; #mbox-cells = <2>; - mbox-name = "ARM-MHU"; }; &smmu_etr { diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index dbc22e70b62c..cf4a58211399 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -197,6 +197,7 @@ cache-size = <0x200000>; cache-line-size = <64>; cache-sets = <2048>; + cache-level = <2>; }; A53_L2: l2-cache1 { @@ -204,6 +205,7 @@ cache-size = <0x100000>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; }; }; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index 5082fcd1fea5..e8584d3b698f 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -9,5 +9,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \ bcm2837-rpi-zero-2-w.dtb subdir-y += bcm4908 +subdir-y += bcmbca subdir-y += northstar2 subdir-y += stingray diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts index b63eefab48bd..064f7f549665 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts @@ -83,25 +83,25 @@ compatible = "gpio-keys-polled"; poll-interval = <100>; - brightness { + key-brightness { label = "LEDs"; linux,code = <KEY_BRIGHTNESS_ZERO>; gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; }; - wps { + key-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; }; - wifi { + key-wifi { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; }; - restart { + key-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts index 169fbb7cfd34..04f8524b5335 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts @@ -18,25 +18,25 @@ compatible = "gpio-keys-polled"; poll-interval = <100>; - wifi { + key-wifi { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; }; - wps { + key-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; - restart { + key-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; }; - brightness { + key-brightness { label = "LEDs"; linux,code = <KEY_BRIGHTNESS_ZERO>; gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile new file mode 100644 index 000000000000..38f14307184b --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_BCMBCA) += \ + bcm4912-asus-gt-ax6000.dtb \ + bcm94912.dtb \ + bcm963158.dtb \ + bcm96858.dtb \ + bcm963146.dtb \ + bcm96856.dtb \ + bcm96813.dtb diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts new file mode 100644 index 000000000000..ed554666e95e --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include "bcm4912.dtsi" + +/ { + compatible = "asus,gt-ax6000", "brcm,bcm4912", "brcm,bcmbca"; + model = "Asus GT-AX6000"; + + memory@0 { + device_type = "memory"; + reg = <0x00 0x00 0x00 0x40000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi new file mode 100644 index 000000000000..3d016c2ce675 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "brcm,bcm4912", "brcm,bcmbca"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + B53_0: cpu@0 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_1: cpu@1 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_2: cpu@2 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_3: cpu@3 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B53_0>, <&B53_1>, + <&B53_2>, <&B53_3>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi new file mode 100644 index 000000000000..04de96bd0a03 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "brcm,bcm63146", "brcm,bcmbca"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + B53_0: cpu@0 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_1: cpu@1 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B53_0>, <&B53_1>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi new file mode 100644 index 000000000000..13629702f70b --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "brcm,bcm63158", "brcm,bcmbca"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + B53_0: cpu@0 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_1: cpu@1 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_2: cpu@2 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_3: cpu@3 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B53_0>, <&B53_1>, + <&B53_2>, <&B53_3>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi new file mode 100644 index 000000000000..c3e6197be808 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "brcm,bcm6813", "brcm,bcmbca"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + B53_0: cpu@0 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_1: cpu@1 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_2: cpu@2 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_3: cpu@3 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B53_0>, <&B53_1>, + <&B53_2>, <&B53_3>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi new file mode 100644 index 000000000000..0bce6497219f --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "brcm,bcm6856", "brcm,bcmbca"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + B53_0: cpu@0 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_1: cpu@1 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B53_0>, <&B53_1>; + }; + + clocks: clocks { + periph_clk:periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1000 0x1000>, /* GICD */ + <0x2000 0x2000>, /* GICC */ + <0x4000 0x2000>, /* GICH */ + <0x6000 0x2000>; /* GICV */ + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x800000>; + + uart0: serial@640 { + compatible = "brcm,bcm6345-uart"; + reg = <0x640 0x18>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "refclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi new file mode 100644 index 000000000000..29a880c6c858 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "brcm,bcm6858", "brcm,bcmbca"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + B53_0: cpu@0 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_1: cpu@1 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_2: cpu@2 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B53_3: cpu@3 { + compatible = "brcm,brahma-b53"; + device_type = "cpu"; + reg = <0x0 0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B53_0>, <&B53_1>, + <&B53_2>, <&B53_3>; + }; + + clocks: clocks { + periph_clk:periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1000 0x1000>, /* GICD */ + <0x2000 0x2000>, /* GICC */ + <0x4000 0x2000>, /* GICH */ + <0x6000 0x2000>; /* GICV */ + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xff800000 0x62000>; + + uart0: serial@640 { + compatible = "brcm,bcm6345-uart"; + reg = <0x640 0x18>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "refclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts new file mode 100644 index 000000000000..a3623e6f6919 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm4912.dtsi" + +/ { + model = "Broadcom BCM94912 Reference Board"; + compatible = "brcm,bcm94912", "brcm,bcm4912", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts new file mode 100644 index 000000000000..e39f1e6d4774 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm63146.dtsi" + +/ { + model = "Broadcom BCM963146 Reference Board"; + compatible = "brcm,bcm963146", "brcm,bcm63146", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts new file mode 100644 index 000000000000..eba07e0b1ca6 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm63158.dtsi" + +/ { + model = "Broadcom BCM963158 Reference Board"; + compatible = "brcm,bcm963158", "brcm,bcm63158", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts new file mode 100644 index 000000000000..af17091ae764 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6813.dtsi" + +/ { + model = "Broadcom BCM96813 Reference Board"; + compatible = "brcm,bcm96813", "brcm,bcm6813", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts new file mode 100644 index 000000000000..032aeb75c983 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6856.dtsi" + +/ { + model = "Broadcom BCM96856 Reference Board"; + compatible = "brcm,bcm96856", "brcm,bcm6856", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts new file mode 100644 index 000000000000..0cbf582f5d54 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6858.dtsi" + +/ { + model = "Broadcom BCM96858 Reference Board"; + compatible = "brcm,bcm96858", "brcm,bcm6858", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index 09d4aa8ae1d6..8f8c25e51194 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -567,7 +567,7 @@ reg-names = "amac_base"; dma-coherent; interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; - status= "disabled"; + status = "disabled"; }; nand: nand@360000 { diff --git a/arch/arm64/boot/dts/exynos/exynos-pinctrl.h b/arch/arm64/boot/dts/exynos/exynos-pinctrl.h new file mode 100644 index 000000000000..7dd94a9b3652 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos-pinctrl.h @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Samsung Exynos DTS pinctrl constants + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2022 Linaro Ltd + * Author: Krzysztof Kozlowski <krzk@kernel.org> + */ + +#ifndef __DTS_ARM64_SAMSUNG_EXYNOS_PINCTRL_H__ +#define __DTS_ARM64_SAMSUNG_EXYNOS_PINCTRL_H__ + +#define EXYNOS_PIN_PULL_NONE 0 +#define EXYNOS_PIN_PULL_DOWN 1 +#define EXYNOS_PIN_PULL_UP 3 + +/* Pin function in power down mode */ +#define EXYNOS_PIN_PDN_OUT0 0 +#define EXYNOS_PIN_PDN_OUT1 1 +#define EXYNOS_PIN_PDN_INPUT 2 +#define EXYNOS_PIN_PDN_PREV 3 + +/* + * Drive strengths for Exynos5410, Exynos542x, Exynos5800, Exynos7885, Exynos850 + * (except GPIO_HSI block), ExynosAutov9 (FSI0, PERIC1) + */ +#define EXYNOS5420_PIN_DRV_LV1 0 +#define EXYNOS5420_PIN_DRV_LV2 1 +#define EXYNOS5420_PIN_DRV_LV3 2 +#define EXYNOS5420_PIN_DRV_LV4 3 + +/* Drive strengths for Exynos5433 */ +#define EXYNOS5433_PIN_DRV_FAST_SR1 0 +#define EXYNOS5433_PIN_DRV_FAST_SR2 1 +#define EXYNOS5433_PIN_DRV_FAST_SR3 2 +#define EXYNOS5433_PIN_DRV_FAST_SR4 3 +#define EXYNOS5433_PIN_DRV_FAST_SR5 4 +#define EXYNOS5433_PIN_DRV_FAST_SR6 5 +#define EXYNOS5433_PIN_DRV_SLOW_SR1 8 +#define EXYNOS5433_PIN_DRV_SLOW_SR2 9 +#define EXYNOS5433_PIN_DRV_SLOW_SR3 0xa +#define EXYNOS5433_PIN_DRV_SLOW_SR4 0xb +#define EXYNOS5433_PIN_DRV_SLOW_SR5 0xc +#define EXYNOS5433_PIN_DRV_SLOW_SR6 0xf + +/* Drive strengths for Exynos7 (except FSYS1) */ +#define EXYNOS7_PIN_DRV_LV1 0 +#define EXYNOS7_PIN_DRV_LV2 2 +#define EXYNOS7_PIN_DRV_LV3 1 +#define EXYNOS7_PIN_DRV_LV4 3 + +/* Drive strengths for Exynos7 FSYS1 block */ +#define EXYNOS7_FSYS1_PIN_DRV_LV1 0 +#define EXYNOS7_FSYS1_PIN_DRV_LV2 4 +#define EXYNOS7_FSYS1_PIN_DRV_LV3 2 +#define EXYNOS7_FSYS1_PIN_DRV_LV4 6 +#define EXYNOS7_FSYS1_PIN_DRV_LV5 1 +#define EXYNOS7_FSYS1_PIN_DRV_LV6 5 + +/* Drive strengths for Exynos850 GPIO_HSI block */ +#define EXYNOS850_HSI_PIN_DRV_LV1 0 /* 1x */ +#define EXYNOS850_HSI_PIN_DRV_LV1_5 1 /* 1.5x */ +#define EXYNOS850_HSI_PIN_DRV_LV2 2 /* 2x */ +#define EXYNOS850_HSI_PIN_DRV_LV2_5 3 /* 2.5x */ +#define EXYNOS850_HSI_PIN_DRV_LV3 4 /* 3x */ +#define EXYNOS850_HSI_PIN_DRV_LV4 5 /* 4x */ + +#define EXYNOS_PIN_FUNC_INPUT 0 +#define EXYNOS_PIN_FUNC_OUTPUT 1 +#define EXYNOS_PIN_FUNC_2 2 +#define EXYNOS_PIN_FUNC_3 3 +#define EXYNOS_PIN_FUNC_4 4 +#define EXYNOS_PIN_FUNC_5 5 +#define EXYNOS_PIN_FUNC_6 6 +#define EXYNOS_PIN_FUNC_EINT 0xf +#define EXYNOS_PIN_FUNC_F EXYNOS_PIN_FUNC_EINT + +#endif /* __DTS_ARM64_SAMSUNG_EXYNOS_PINCTRL_H__ */ diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi index 4b46af3e164d..681553577ebc 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi @@ -9,7 +9,7 @@ * tree nodes are listed in this file. */ -#include <dt-bindings/pinctrl/samsung.h> +#include "exynos-pinctrl.h" #define PIN(_pin, _func, _pull, _drv) \ pin- ## _pin { \ diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 75b548e495a0..bd6a354b9cb5 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -1820,7 +1820,7 @@ }; }; - mshc_0: mshc@15540000 { + mshc_0: mmc@15540000 { compatible = "samsung,exynos7-dw-mshc-smu"; interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1833,7 +1833,7 @@ status = "disabled"; }; - mshc_1: mshc@15550000 { + mshc_1: mmc@15550000 { compatible = "samsung,exynos7-dw-mshc-smu"; interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1846,7 +1846,7 @@ status = "disabled"; }; - mshc_2: mshc@15560000 { + mshc_2: mmc@15560000 { compatible = "samsung,exynos7-dw-mshc-smu"; interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index 0895e818d3c1..e38c59cf18dc 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -357,7 +357,7 @@ pmic_irq: pmic-irq-pins { samsung,pins = "gpa0-2"; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; }; }; @@ -397,14 +397,14 @@ samsung,pins = "gph1-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; usb3drd_boost_en: usb3drd-boost-en-pins { samsung,pins = "gpf4-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi index be9b971f3697..ee9c24a226f3 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi @@ -9,7 +9,7 @@ * device tree nodes in this file. */ -#include <dt-bindings/pinctrl/samsung.h> +#include "exynos-pinctrl.h" &pinctrl_alive { gpa0: gpa0-gpio-bank { @@ -188,161 +188,161 @@ samsung,pins = "gpb0-1", "gpb0-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; hs_i2c11_bus: hs-i2c11-bus-pins { samsung,pins = "gpb0-3", "gpb0-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; hs_i2c2_bus: hs-i2c2-bus-pins { samsung,pins = "gpd0-3", "gpd0-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; uart0_data: uart0-data-pins { samsung,pins = "gpd0-0", "gpd0-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; uart0_fctl: uart0-fctl-pins { samsung,pins = "gpd0-2", "gpd0-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; uart2_data: uart2-data-pins { samsung,pins = "gpd1-4", "gpd1-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; hs_i2c3_bus: hs-i2c3-bus-pins { samsung,pins = "gpd1-3", "gpd1-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; uart1_data: uart1-data-pins { samsung,pins = "gpd1-0", "gpd1-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; uart1_fctl: uart1-fctl-pins { samsung,pins = "gpd1-2", "gpd1-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; hs_i2c0_bus: hs-i2c0-bus-pins { samsung,pins = "gpd2-1", "gpd2-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; hs_i2c1_bus: hs-i2c1-bus-pins { samsung,pins = "gpd2-3", "gpd2-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; hs_i2c9_bus: hs-i2c9-bus-pins { samsung,pins = "gpd2-7", "gpd2-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; pwm0_out: pwm0-out-pins { samsung,pins = "gpd2-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; pwm1_out: pwm1-out-pins { samsung,pins = "gpd2-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; pwm2_out: pwm2-out-pins { samsung,pins = "gpd2-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; pwm3_out: pwm3-out-pins { samsung,pins = "gpd2-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; hs_i2c8_bus: hs-i2c8-bus-pins { samsung,pins = "gpd5-3", "gpd5-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; uart3_data: uart3-data-pins { samsung,pins = "gpd5-0", "gpd5-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; spi2_bus: spi2-bus-pins { samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; spi1_bus: spi1-bus-pins { samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; spi0_bus: spi0-bus-pins { samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; hs_i2c4_bus: hs-i2c4-bus-pins { samsung,pins = "gpg3-1", "gpg3-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; hs_i2c5_bus: hs-i2c5-bus-pins { samsung,pins = "gpg3-3", "gpg3-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; }; @@ -359,7 +359,7 @@ samsung,pins = "gpj0-1", "gpj0-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; }; @@ -376,7 +376,7 @@ samsung,pins = "gpj1-1", "gpj1-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; }; @@ -393,7 +393,7 @@ samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; }; @@ -410,7 +410,7 @@ samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; }; @@ -427,35 +427,35 @@ samsung,pins = "gpr4-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; }; sd2_cmd: sd2-cmd-pins { samsung,pins = "gpr4-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; }; sd2_cd: sd2-cd-pins { samsung,pins = "gpr4-2"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; }; sd2_bus1: sd2-bus-width1-pins { samsung,pins = "gpr4-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; }; sd2_bus4: sd2-bus-width4-pins { samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; }; }; @@ -683,20 +683,20 @@ samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; ufs_refclk_out: ufs-refclk-out-pins { samsung,pins = "gpg2-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>; }; ufs_rst_n: ufs-rst-n-pins { samsung,pins = "gph1-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts index 4cf9aa25f618..5db9a81ac7bb 100644 --- a/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts +++ b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts @@ -60,6 +60,26 @@ }; }; +&mmc_0 { + status = "okay"; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-highspeed; + non-removable; + mmc-hs400-enhanced-strobe; + card-detect-delay = <200>; + clock-frequency = <800000000>; + bus-width = <8>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <2 4>; + samsung,dw-mshc-hs400-timing = <0 2>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk_fast_slew_rate_3x &sd0_cmd &sd0_rdqs + &sd0_bus1 &sd0_bus4 &sd0_bus8>; +}; + &oscclk { clock-frequency = <26000000>; }; diff --git a/arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi index a50c1dbd5545..34bb12191955 100644 --- a/arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi @@ -9,8 +9,8 @@ * device tree nodes in this file. */ -#include <dt-bindings/pinctrl/samsung.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include "exynos-pinctrl.h" &pinctrl_alive { etc0: etc0-gpio-bank { diff --git a/arch/arm64/boot/dts/exynos/exynos7885.dtsi b/arch/arm64/boot/dts/exynos/exynos7885.dtsi index 9c233c56558c..23c2e0bb0a2c 100644 --- a/arch/arm64/boot/dts/exynos/exynos7885.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7885.dtsi @@ -240,6 +240,25 @@ clock-names = "oscclk"; }; + cmu_fsys: clock-controller@13400000 { + compatible = "samsung,exynos7885-cmu-fsys"; + reg = <0x13400000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, + <&cmu_top CLK_DOUT_FSYS_BUS>, + <&cmu_top CLK_DOUT_FSYS_MMC_CARD>, + <&cmu_top CLK_DOUT_FSYS_MMC_EMBD>, + <&cmu_top CLK_DOUT_FSYS_MMC_SDIO>, + <&cmu_top CLK_DOUT_FSYS_USB30DRD>; + clock-names = "oscclk", + "dout_fsys_bus", + "dout_fsys_mmc_card", + "dout_fsys_mmc_embd", + "dout_fsys_mmc_sdio", + "dout_fsys_usb30drd"; + }; + pinctrl_alive: pinctrl@11cb0000 { compatible = "samsung,exynos7885-pinctrl"; reg = <0x11cb0000 0x1000>; @@ -274,6 +293,19 @@ reg = <0x11c80000 0x10000>; }; + mmc_0: mmc@13500000 { + compatible = "samsung,exynos7-dw-mshc-smu"; + reg = <0x13500000 0x2000>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_fsys CLK_GOUT_MMC_EMBD_ACLK>, + <&cmu_fsys CLK_GOUT_MMC_EMBD_SDCLKIN>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + serial_0: serial@13800000 { compatible = "samsung,exynos5433-uart"; reg = <0x13800000 0x100>; diff --git a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi index f43e4a206282..424bc80bde68 100644 --- a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi @@ -10,7 +10,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/samsung.h> +#include "exynos-pinctrl.h" &pinctrl_alive { gpa0: gpa0-gpio-bank { diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi index ef0349d1c3d0..e413a51c2d08 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi @@ -8,7 +8,7 @@ * device tree nodes in this file. */ -#include <dt-bindings/pinctrl/samsung.h> +#include "exynos-pinctrl.h" &pinctrl_alive { gpa0: gpa0-gpio-bank { @@ -1089,21 +1089,21 @@ /* PERIC1 USI11_SPI */ spi11_bus: spi11-pins { - samsung,pins = "gpp3-6", "gpp3-5", "gpp3-4"; + samsung,pins = "gpp5-6", "gpp5-5", "gpp5-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; }; spi11_cs: spi11-cs-pins { - samsung,pins = "gpp3-7"; + samsung,pins = "gpp5-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; }; spi11_cs_func: spi11-cs-func-pins { - samsung,pins = "gpp3-7"; + samsung,pins = "gpp5-7"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts index 17e568853eb6..eec3192c0631 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts +++ b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts @@ -39,9 +39,18 @@ regulator-boot-on; enable-active-high; }; + + ufs_1_fixed_vcc_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "ufs-vcc"; + gpio = <&gpg2 2 GPIO_ACTIVE_HIGH>; + regulator-boot-on; + enable-active-high; + }; }; &serial_0 { + pinctrl-0 = <&uart0_bus_dual>; status = "okay"; }; @@ -49,13 +58,24 @@ status = "okay"; }; +&ufs_1_phy { + status = "okay"; +}; + &ufs_0 { status = "okay"; vcc-supply = <&ufs_0_fixed_vcc_reg>; vcc-fixed-regulator; }; +&ufs_1 { + status = "okay"; + vcc-supply = <&ufs_1_fixed_vcc_reg>; + vcc-fixed-regulator; +}; + &usi_0 { + samsung,clkreq-on; /* needed for UART mode */ status = "okay"; }; diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi index 0ce46ec5cdc3..2013718532f3 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/samsung,exynosautov9.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/samsung,boot-mode.h> #include <dt-bindings/soc/samsung,exynos-usi.h> / { @@ -265,6 +266,16 @@ IRQ_TYPE_LEVEL_HIGH)>; }; + pdma0: dma-controller@1b2e0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x1b2e0000 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_busmc CLK_GOUT_BUSMC_PDMA0_PCLK>; + clock-names = "apb_pclk"; + arm,pl330-broken-no-flushp; + #dma-cells = <1>; + }; + pinctrl_alive: pinctrl@10450000 { compatible = "samsung,exynosautov9-pinctrl"; reg = <0x10450000 0x1000>; @@ -312,6 +323,22 @@ pmu_system_controller: system-controller@10460000 { compatible = "samsung,exynos7-pmu", "syscon"; reg = <0x10460000 0x10000>; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x3a00>; /* SYSTEM_CONFIGURATION */ + value = <0x2>; + mask = <0x2>; + }; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x810>; /* SYSIP_DAT0 */ + mode-bootloader = <EXYNOSAUTOV9_BOOT_BOOTLOADER>; + mode-fastboot = <EXYNOSAUTOV9_BOOT_FASTBOOT>; + mode-recovery = <EXYNOSAUTOV9_BOOT_RECOVERY>; + }; }; syscon_fsys2: syscon@17c20000 { @@ -324,12 +351,17 @@ reg = <0x10220000 0x2000>; }; + syscon_peric1: syscon@10820000 { + compatible = "samsung,exynosautov9-sysreg", "syscon"; + reg = <0x10820000 0x2000>; + }; + usi_0: usi@103000c0 { - compatible = "samsung,exynos850-usi"; + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; reg = <0x103000c0 0x20>; samsung,sysreg = <&syscon_peric0 0x1000>; samsung,mode = <USI_V2_UART>; - samsung,clkreq-on; /* needed for UART mode */ #address-cells = <1>; #size-cells = <1>; ranges; @@ -338,21 +370,1083 @@ clock-names = "pclk", "ipclk"; status = "disabled"; - /* USI: UART */ serial_0: serial@10300000 { - compatible = "samsung,exynos850-uart"; + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; reg = <0x10300000 0xc0>; interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&uart0_bus_dual>; + pinctrl-0 = <&uart0_bus>; clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>, <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>; clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <256>; + status = "disabled"; + }; + + spi_0: spi@10300000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x10300000 0x30>; + interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus &spi0_cs_func>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 1>, <&pdma0 0>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_0: i2c@10300000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10300000 0xc0>; + interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c0_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_0: usi@103100c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103100c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x1004>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_1>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_1>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_1: i2c@10310000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10310000 0xc0>; + interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c1_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_1>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_1>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_1: usi@103200c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103200c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x1008>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_1: serial@10320000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x10320000 0xc0>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <256>; + status = "disabled"; + }; + + spi_1: spi@10320000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x10320000 0x30>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus &spi1_cs_func>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 3>, <&pdma0 2>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_2: i2c@10320000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10320000 0xc0>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c2_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_1: usi@103300c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103300c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x100c>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_3>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_3>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_3: i2c@10330000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10330000 0xc0>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c3_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_3>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_3>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_2: usi@103400c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103400c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x1010>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_2: serial@10340000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x10340000 0xc0>; + interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <64>; + status = "disabled"; + }; + + spi_2: spi@10340000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x10340000 0x30>; + interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_bus &spi2_cs_func>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 5>, <&pdma0 4>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_4: i2c@10340000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10340000 0xc0>; + interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c4_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_2: usi@103500c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103500c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x1014>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_5>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_5>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_5: i2c@10350000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10350000 0xc0>; + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c5_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_5>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_5>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_3: usi@103600c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103600c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x1018>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_3: serial@10360000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x10360000 0xc0>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <64>; + status = "disabled"; + }; + + spi_3: spi@10360000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x10360000 0x30>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_bus &spi3_cs_func>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 7>, <&pdma0 6>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_6: i2c@10360000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10360000 0xc0>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c6_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_3: usi@103700c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103700c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x101c>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_7>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_7>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_7: i2c@10370000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10370000 0xc0>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c7_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_7>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_7>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_4: usi@103800c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103800c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x1020>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_4: serial@10380000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x10380000 0xc0>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <64>; + status = "disabled"; + }; + + spi_4: spi@10380000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x10380000 0x30>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi4_bus &spi4_cs_func>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 9>, <&pdma0 8>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_8: i2c@10380000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10380000 0xc0>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c8_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_4: usi@103900c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103900c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x1024>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_9>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_9>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_9: i2c@10390000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10390000 0xc0>; + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c9_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_9>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_9>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_5: usi@103a00c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103a00c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x1028>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_5: serial@103a0000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x103a0000 0xc0>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart5_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <64>; + status = "disabled"; + }; + + spi_5: spi@103a0000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x103a0000 0x30>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi5_bus &spi5_cs_func>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 11>, <&pdma0 10>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_10: i2c@103a0000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x103a0000 0xc0>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c10_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_5: usi@103b00c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x103b00c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x102c>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_11>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_11>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_11: i2c@103b0000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x103b0000 0xc0>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c11_bus>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_11>, + <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_11>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_6: usi@109000c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109000c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x1000>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_6: serial@10900000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x10900000 0xc0>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart6_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <256>; + status = "disabled"; + }; + + spi_6: spi@10900000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x10900000 0x30>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi6_bus &spi6_cs_func>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI06_USI>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 13>, <&pdma0 12>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_12: i2c@10900000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10900000 0xc0>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c12_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_6: usi@109100c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109100c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x1004>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_1>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_1>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_13: i2c@10910000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10910000 0xc0>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c13_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_1>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_1>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_7: usi@109200c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109200c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x1008>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_7: serial@10920000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x10920000 0xc0>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart7_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <64>; + status = "disabled"; + }; + + spi_7: spi@10920000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x10920000 0x30>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi7_bus &spi7_cs_func>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI07_USI>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 15>, <&pdma0 14>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_14: i2c@10920000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10920000 0xc0>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c14_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_7: usi@109300c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109300c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x100c>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_3>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_3>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_15: i2c@10930000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10930000 0xc0>; + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c15_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_3>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_3>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_8: usi@109400c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109400c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x1010>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_8: serial@10940000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x10940000 0xc0>; + interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart8_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <64>; + status = "disabled"; + }; + + spi_8: spi@10940000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x10940000 0x30>; + interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi8_bus &spi8_cs_func>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI08_USI>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 17>, <&pdma0 16>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_16: i2c@10940000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10940000 0xc0>; + interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c16_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_8: usi@109500c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109500c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x1014>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_5>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_5>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_17: i2c@10950000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10950000 0xc0>; + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c17_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_5>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_5>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_9: usi@109600c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109600c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x1018>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_9: serial@10960000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x10960000 0xc0>; + interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart9_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <64>; + status = "disabled"; + }; + + spi_9: spi@10960000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x10960000 0x30>; + interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi9_bus &spi9_cs_func>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 19>, <&pdma0 18>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_18: i2c@10960000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10960000 0xc0>; + interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c18_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_9: usi@109700c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109700c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x101c>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_7>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_7>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_19: i2c@10970000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10970000 0xc0>; + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c19_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_7>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_7>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_10: usi@109800c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109800c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x1020>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_10: serial@10980000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x10980000 0xc0>; + interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart10_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <64>; + status = "disabled"; + }; + + spi_10: spi@10980000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x10980000 0x30>; + interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi10_bus &spi10_cs_func>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 21>, <&pdma0 20>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_20: i2c@10980000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10980000 0xc0>; + interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c20_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; }; - ufs_0_phy: ufs0-phy@17e04000 { + usi_i2c_10: usi@109900c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109900c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x1024>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_9>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_9>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_21: i2c@10990000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x10990000 0xc0>; + interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c21_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_9>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_9>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_11: usi@109a00c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109a00c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x1028>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_11: serial@109a0000 { + compatible = "samsung,exynosautov9-uart", + "samsung,exynos850-uart"; + reg = <0x109a0000 0xc0>; + interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart11_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <64>; + status = "disabled"; + }; + + spi_11: spi@109a0000 { + compatible = "samsung,exynosautov9-spi"; + reg = <0x109a0000 0x30>; + interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi11_bus &spi11_cs_func>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_22: i2c@109a0000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x109a0000 0xc0>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c22_bus>; + interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usi_i2c_11: usi@109b00c0 { + compatible = "samsung,exynosautov9-usi", + "samsung,exynos850-usi"; + reg = <0x109b00c0 0x20>; + samsung,sysreg = <&syscon_peric1 0x102c>; + samsung,mode = <USI_V2_I2C>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_11>, + <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_11>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + hsi2c_23: i2c@109b0000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x109b0000 0xc0>; + interrupts = <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsi2c23_bus>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_11>, + <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_11>; + clock-names = "hsi2c", "hsi2c_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + ufs_0_phy: phy@17e04000 { compatible = "samsung,exynosautov9-ufs-phy"; reg = <0x17e04000 0xc00>; reg-names = "phy-pma"; @@ -363,13 +1457,13 @@ status = "disabled"; }; - ufs_0: ufs0@17e00000 { - compatible ="samsung,exynosautov9-ufs"; + ufs_0: ufs@17e00000 { + compatible = "samsung,exynosautov9-ufs"; - reg = <0x17e00000 0x100>, /* 0: HCI standard */ - <0x17e01100 0x410>, /* 1: Vendor-specific */ - <0x17e80000 0x8000>, /* 2: UNIPRO */ - <0x17dc0000 0x2200>; /* 3: UFS protector */ + reg = <0x17e00000 0x100>, + <0x17e01100 0x410>, + <0x17e80000 0x8000>, + <0x17dc0000 0x2200>; reg-names = "hci", "vs_hci", "unipro", "ufsp"; interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD0_ACLK>, @@ -383,6 +1477,58 @@ samsung,sysreg = <&syscon_fsys2 0x710>; status = "disabled"; }; + + ufs_1_phy: phy@17f04000 { + compatible = "samsung,exynosautov9-ufs-phy"; + reg = <0x17f04000 0xc00>; + reg-names = "phy-pma"; + samsung,pmu-syscon = <&pmu_system_controller 0x72c>; + #phy-cells = <0>; + clocks = <&xtcxo>; + clock-names = "ref_clk"; + status = "disabled"; + }; + + ufs_1: ufs@17f00000 { + compatible = "samsung,exynosautov9-ufs"; + + reg = <0x17f00000 0x100>, + <0x17f01100 0x410>, + <0x17f80000 0x8000>, + <0x17de0000 0x2200>; + reg-names = "hci", "vs_hci", "unipro", "ufsp"; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD1_ACLK>, + <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD1_UNIPRO>; + clock-names = "core_clk", "sclk_unipro_main"; + freq-table-hz = <0 0>, <0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&ufs_rst_n_1 &ufs_refclk_out_1>; + phys = <&ufs_1_phy>; + phy-names = "ufs-phy"; + samsung,sysreg = <&syscon_fsys2 0x714>; + status = "disabled"; + }; + + watchdog_cl0: watchdog@10050000 { + compatible = "samsung,exynosautov9-wdt"; + reg = <0x10050000 0x100>; + interrupts = <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_peris CLK_GOUT_WDT_CLUSTER0>, <&xtcxo>; + clock-names = "watchdog", "watchdog_src"; + samsung,syscon-phandle = <&pmu_system_controller>; + samsung,cluster-index = <0>; + }; + + watchdog_cl1: watchdog@10060000 { + compatible = "samsung,exynosautov9-wdt"; + reg = <0x10060000 0x100>; + interrupts = <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_peris CLK_GOUT_WDT_CLUSTER1>, <&xtcxo>; + clock-names = "watchdog", "watchdog_src"; + samsung,syscon-phandle = <&pmu_system_controller>; + samsung,cluster-index = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 238a83e5b8c6..8bf7f7ecebaa 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -58,6 +58,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-rdk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb @@ -79,9 +80,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb @@ -107,6 +110,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-imx219.dtbo imx8mm-venice-gw72xx-0x-rs232-rts-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs232-rts.dtbo diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts index e22c5e77fecd..5a8d85a7d161 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts @@ -69,7 +69,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q128a11", "jedec,spi-nor"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index 50a72cda4727..a863022529ac 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -204,7 +204,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x10000 0x10000>; + reg = <0x10000 0x10000>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; }; @@ -212,7 +212,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x20000 0x10000>; + reg = <0x20000 0x10000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; }; @@ -220,7 +220,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x30000 0x10000>; + reg = <0x30000 0x10000>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; }; @@ -228,7 +228,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x40000 0x10000>; + reg = <0x40000 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; }; @@ -271,6 +271,14 @@ }; }; + sfp: efuse@1e80000 { + compatible = "fsl,ls1021a-sfp"; + reg = <0x0 0x1e80000 0x0 0x10000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + clock-names = "sfp"; + }; + sec_mon: sec_mon@1e90000 { compatible = "fsl,sec-v5.4-mon", "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon"; @@ -465,7 +473,7 @@ status = "disabled"; }; - edma0: edma@2c00000 { + edma0: dma-controller@2c00000 { #dma-cells = <2>; compatible = "fsl,vf610-edma"; reg = <0x0 0x2c00000 0x0 0x10000>, diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index 5baf060acf93..0bb2f28a0441 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -93,7 +93,7 @@ compatible = "mdio-mux-multiplexer"; mux-controls = <&mux 0>; mdio-parent-bus = <&enetc_mdio_pf3>; - #address-cells=<1>; + #address-cells = <1>; #size-cells = <0>; /* on-board RGMII PHY */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index d5cdd77e5a95..5627dd7734f3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -96,7 +96,7 @@ }; reboot { - compatible ="syscon-reboot"; + compatible = "syscon-reboot"; regmap = <&rst>; offset = <0>; mask = <0x02>; @@ -120,13 +120,13 @@ }; gic: interrupt-controller@6000000 { - compatible= "arm,gic-v3"; + compatible = "arm,gic-v3"; #address-cells = <2>; #size-cells = <2>; ranges; - reg= <0x0 0x06000000 0 0x10000>, /* GIC Dist */ + reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ <0x0 0x06040000 0 0x40000>; /* GIC Redistributor */ - #interrupt-cells= <3>; + #interrupt-cells = <3>; interrupt-controller; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>; @@ -772,28 +772,28 @@ sec_jr0: jr@10000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x10000 0x10000>; + reg = <0x10000 0x10000>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr1: jr@20000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x20000 0x10000>; + reg = <0x20000 0x10000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr2: jr@30000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x30000 0x10000>; + reg = <0x30000 0x10000>; interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr3: jr@40000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x40000 0x10000>; + reg = <0x40000 0x10000>; interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 21200cbf7161..ca3d5a90d6d4 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -144,7 +144,7 @@ }; reboot { - compatible ="syscon-reboot"; + compatible = "syscon-reboot"; regmap = <&dcfg>; offset = <0xb0>; mask = <0x02>; @@ -354,7 +354,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x10000 0x10000>; + reg = <0x10000 0x10000>; interrupts = <0 71 0x4>; }; @@ -362,7 +362,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x20000 0x10000>; + reg = <0x20000 0x10000>; interrupts = <0 72 0x4>; }; @@ -370,7 +370,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x30000 0x10000>; + reg = <0x30000 0x10000>; interrupts = <0 73 0x4>; }; @@ -378,11 +378,19 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x40000 0x10000>; + reg = <0x40000 0x10000>; interrupts = <0 74 0x4>; }; }; + sfp: efuse@1e80000 { + compatible = "fsl,ls1021a-sfp"; + reg = <0x0 0x1e80000 0x0 0x10000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + clock-names = "sfp"; + }; + dcfg: dcfg@1ee0000 { compatible = "fsl,ls1043a-dcfg", "syscon"; reg = <0x0 0x1ee0000 0x0 0x10000>; @@ -784,7 +792,7 @@ big-endian; }; - edma0: edma@2c00000 { + edma0: dma-controller@2c00000 { #dma-cells = <2>; compatible = "fsl,vf610-edma"; reg = <0x0 0x2c00000 0x0 0x10000>, diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 0085e83adf65..feab604322cf 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -112,7 +112,7 @@ }; reboot { - compatible ="syscon-reboot"; + compatible = "syscon-reboot"; regmap = <&dcfg>; offset = <0xb0>; mask = <0x02>; @@ -360,7 +360,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x10000 0x10000>; + reg = <0x10000 0x10000>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; }; @@ -368,7 +368,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x20000 0x10000>; + reg = <0x20000 0x10000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; }; @@ -376,7 +376,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x30000 0x10000>; + reg = <0x30000 0x10000>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; }; @@ -384,7 +384,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x40000 0x10000>; + reg = <0x40000 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -413,6 +413,14 @@ ranges = <0x0 0x5 0x08000000 0x8000000>; }; + sfp: efuse@1e80000 { + compatible = "fsl,ls1021a-sfp"; + reg = <0x0 0x1e80000 0x0 0x10000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + clock-names = "sfp"; + }; + dcfg: dcfg@1ee0000 { compatible = "fsl,ls1046a-dcfg", "syscon"; reg = <0x0 0x1ee0000 0x0 0x1000>; @@ -683,7 +691,7 @@ big-endian; }; - edma0: edma@2c00000 { + edma0: dma-controller@2c00000 { #dma-cells = <2>; compatible = "fsl,vf610-edma"; reg = <0x0 0x2c00000 0x0 0x10000>, diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts index d3f03dcbb8c3..ef6c8967533e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts @@ -35,14 +35,14 @@ * external power off (e.g ATX Power Button) * asserted */ - powerdn { + button-powerdn { label = "External Power Down"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; }; /* Rear Panel 'ADMIN' button (GPIO_H) */ - admin { + button-admin { label = "ADMIN button"; gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; linux,code = <KEY_WPS_BUTTON>; @@ -52,17 +52,17 @@ leds { compatible = "gpio-leds"; - sfp1down { + led-0 { label = "ten64:green:sfp1:down"; gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; }; - sfp2up { + led-1 { label = "ten64:green:sfp2:up"; gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; }; - admin { + led-2 { label = "ten64:admin"; gpios = <&sfpgpio 12 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index f476b7d8b056..421d879013d7 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -269,6 +269,14 @@ }; }; + sfp: efuse@1e80000 { + compatible = "fsl,ls1028a-sfp"; + reg = <0x0 0x1e80000 0x0 0x10000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + clock-names = "sfp"; + }; + tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; @@ -526,28 +534,28 @@ sec_jr0: jr@10000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x10000 0x10000>; + reg = <0x10000 0x10000>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr1: jr@20000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x20000 0x10000>; + reg = <0x20000 0x10000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr2: jr@30000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x30000 0x10000>; + reg = <0x30000 0x10000>; interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr3: jr@40000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x40000 0x10000>; + reg = <0x40000 0x10000>; interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 4ba1e0499dfd..d76f1c42f3fa 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -73,7 +73,7 @@ }; reboot { - compatible ="syscon-reboot"; + compatible = "syscon-reboot"; regmap = <&rstcr>; offset = <0x0>; mask = <0x2>; @@ -278,6 +278,14 @@ little-endian; }; + sfp: efuse@1e80000 { + compatible = "fsl,ls1028a-sfp"; + reg = <0x0 0x1e80000 0x0 0x10000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + clock-names = "sfp"; + }; + isc: syscon@1f70000 { compatible = "fsl,ls2080a-isc", "syscon"; reg = <0x0 0x1f70000 0x0 0x10000>; @@ -479,28 +487,28 @@ sec_jr0: jr@10000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x10000 0x10000>; + reg = <0x10000 0x10000>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr1: jr@20000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x20000 0x10000>; + reg = <0x20000 0x10000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr2: jr@30000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x30000 0x10000>; + reg = <0x30000 0x10000>; interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr3: jr@40000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x40000 0x10000>; + reg = <0x40000 0x10000>; interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts index 2ecfa90f5e28..4d721197d837 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts @@ -36,7 +36,7 @@ compatible = "mdio-mux-multiplexer"; mux-controls = <&mux 0>; mdio-parent-bus = <&emdio1>; - #address-cells=<1>; + #address-cells = <1>; #size-cells = <0>; mdio@0 { /* On-board PHY #1 RGMI1*/ @@ -104,7 +104,7 @@ compatible = "mdio-mux-multiplexer"; mux-controls = <&mux 1>; mdio-parent-bus = <&emdio2>; - #address-cells=<1>; + #address-cells = <1>; #size-cells = <0>; mdio@0 { /* Slot #1 (secondary EMI) */ diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index 47ea854720ce..6680fb2a6dc9 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -632,28 +632,28 @@ sec_jr0: jr@10000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x10000 0x10000>; + reg = <0x10000 0x10000>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr1: jr@20000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x20000 0x10000>; + reg = <0x20000 0x10000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr2: jr@30000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x30000 0x10000>; + reg = <0x30000 0x10000>; interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; }; sec_jr3: jr@40000 { compatible = "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x40000 0x10000>; + reg = <0x40000 0x10000>; interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -671,6 +671,14 @@ little-endian; }; + sfp: efuse@1e80000 { + compatible = "fsl,ls1028a-sfp"; + reg = <0x0 0x1e80000 0x0 0x10000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + clock-names = "sfp"; + }; + isc: syscon@1f70000 { compatible = "fsl,lx2160a-isc", "syscon"; reg = <0x0 0x1f70000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts index a1644ceed154..9f5ff1ffe7d5 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts @@ -34,7 +34,7 @@ compatible = "mdio-mux-multiplexer"; mux-controls = <&mux 0>; mdio-parent-bus = <&emdio1>; - #address-cells=<1>; + #address-cells = <1>; #size-cells = <0>; mdio@0 { /* On-board RTL8211F PHY #1 RGMII1 */ @@ -114,7 +114,7 @@ compatible = "mdio-mux-multiplexer"; mux-controls = <&mux 1>; mdio-parent-bus = <&emdio2>; - #address-cells=<1>; + #address-cells = <1>; #size-cells = <0>; mdio@0 { /* Slot #1 (secondary EMI) */ diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi index a79f42a9618e..82a1c4488378 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi @@ -54,7 +54,7 @@ conn_subsys: bus@5b000000 { clock-names = "ipg", "per", "ahb"; power-domains = <&pd IMX_SC_R_SDHC_1>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; }; @@ -83,8 +83,8 @@ conn_subsys: bus@5b000000 { assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>; assigned-clock-rates = <250000000>, <125000000>; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; power-domains = <&pd IMX_SC_R_ENET_0>; status = "disabled"; }; @@ -103,8 +103,8 @@ conn_subsys: bus@5b000000 { assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, <&clk IMX_SC_R_ENET_1 IMX_SC_C_CLKDIV>; assigned-clock-rates = <250000000>, <125000000>; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; power-domains = <&pd IMX_SC_R_ENET_1>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi index f338a886d811..03266bd90a06 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi @@ -285,14 +285,14 @@ &usbotg1 { vbus-supply = <®_usbotg1>; disable-over-current; - dr_mode="otg"; + dr_mode = "otg"; status = "okay"; }; &usbotg2 { pinctrl-names = "default"; disable-over-current; - dr_mode="host"; + dr_mode = "host"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index c42b966f7a64..7d6317d95b13 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -75,6 +75,11 @@ linux,autosuspend-period = <125>; }; + audio_codec_bt_sco: audio-codec-bt-sco { + compatible = "linux,bt-sco"; + #sound-dai-cells = <1>; + }; + wm8524: audio-codec { #sound-dai-cells = <0>; compatible = "wlf,wm8524"; @@ -83,6 +88,25 @@ wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; }; + sound-bt-sco { + compatible = "simple-audio-card"; + simple-audio-card,name = "bt-sco-audio"; + simple-audio-card,format = "dsp_a"; + simple-audio-card,bitclock-inversion; + simple-audio-card,frame-master = <&btcpu>; + simple-audio-card,bitclock-master = <&btcpu>; + + btcpu: simple-audio-card,cpu { + sound-dai = <&sai2>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + + simple-audio-card,codec { + sound-dai = <&audio_codec_bt_sco 1>; + }; + }; + sound-wm8524 { compatible = "simple-audio-card"; simple-audio-card,name = "wm8524-audio"; @@ -346,6 +370,16 @@ status = "okay"; }; +&sai2 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MM_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + &sai3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai3>; @@ -494,6 +528,15 @@ >; }; + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 + >; + }; + pinctrl_sai3: sai3grp { fsl,pins = < MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi index b40148d728ea..9e6170d9394e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi @@ -84,42 +84,42 @@ }; reg_buck1: buck1 { - regulator-min-microvolt = <400000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; reg_buck2: buck2 { - regulator-min-microvolt = <400000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; reg_buck3: buck3 { - regulator-min-microvolt = <400000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; reg_buck4: buck4 { - regulator-min-microvolt = <400000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; reg_buck5: buck5 { - regulator-min-microvolt = <400000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; reg_buck6: buck6 { - regulator-min-microvolt = <400000>; + regulator-min-microvolt = <400000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts index 92eaf4ef4563..c97f4e06ae5f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts @@ -20,13 +20,13 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_led>; - user1 { + led-1 { label = "TestLed601"; gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; }; - user2 { + led-2 { label = "TestLed602"; gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts new file mode 100644 index 000000000000..4a3df2b77b0b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts @@ -0,0 +1,450 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 PHYTEC Messtechnik GmbH + * Author: Teresa Remmet <t.remmet@phytec.de> + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> +#include "imx8mm-phycore-som.dtsi" + +/ { + model = "PHYTEC phyBOARD-Polis-i.MX8MM RDK"; + compatible = "phytec,imx8mm-phyboard-polis-rdk", + "phytec,imx8mm-phycore-som", "fsl,imx8mm"; + + chosen { + stdout-path = &uart3; + }; + + bt_osc_32k: bt-lp-clock { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "bt_osc_32k"; + #clock-cells = <0>; + }; + + can_osc_40m: can-clock { + compatible = "fixed-clock"; + clock-frequency = <40000000>; + clock-output-names = "can_osc_40m"; + #clock-cells = <0>; + }; + + fan { + compatible = "gpio-fan"; + gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0 + 13000 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan>; + #cooling-cells = <2>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc2"; + }; + + led-1 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_CPU; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + usdhc1_pwrseq: pwr-seq { + compatible = "mmc-pwrseq-simple"; + post-power-on-delay-ms = <100>; + power-off-delay-us = <60>; + reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + }; + + reg_can_en: regulator-can-en { + compatible = "regulator-fixed"; + gpio = <&gpio1 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_en>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "CAN_EN"; + startup-delay-us = <20>; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1 { + compatible = "regulator-fixed"; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1pwrgrp>; + regulator-name = "usb_otg1_vbus"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + off-on-delay-us = <20000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VSD_3V3"; + }; + + reg_vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VCC_3V3"; + }; +}; + +/* SPI - CAN MCP251XFD */ +&ecspi1 { + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + can0: can@0 { + compatible = "microchip,mcp251xfd"; + clocks = <&can_osc_40m>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_int>; + reg = <0>; + spi-max-frequency = <20000000>; + xceiver-supply = <®_can_en>; + }; +}; + +&gpio1 { + gpio-line-names = "nINT_ETHPHY", "LED_RED", "WDOG_INT", "X_RTC_INT", + "", "", "", "RESET_ETHPHY", + "CAN_nINT", "CAN_EN", "nENABLE_FLATLINK", "", + "USB_OTG_VBUS_EN", "", "LED_GREEN", "LED_BLUE"; +}; + +&gpio2 { + gpio-line-names = "", "", "", "", + "", "", "BT_REG_ON", "WL_REG_ON", + "BT_DEV_WAKE", "BT_HOST_WAKE", "", "", + "X_SD2_CD_B", "", "", "", + "", "", "", "SD2_RESET_B"; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", + "", "", "", "", + "FAN", "miniPCIe_nPERST", "", "", + "COEX1", "COEX2"; +}; + +&gpio5 { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "ECSPI1_SS0"; +}; + +/* PCIe */ +&pcie0 { + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + assigned-clock-rates = <10000000>, <250000000>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_PHY>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio4 9 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pcie_phy { + clocks = <&clk IMX8MM_CLK_PCIE1_PHY>; + fsl,clkreq-unsupported; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>; + fsl,tx-deemph-gen1 = <0x2d>; + fsl,tx-deemph-gen2 = <0xf>; + status = "okay"; +}; + +&rv3028 { + trickle-resistor-ohms = <3000>; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +/* UART - RS232/RS485 */ +&uart1 { + assigned-clocks = <&clk IMX8MM_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "okay"; +}; + +/* UART - Sterling-LWB Bluetooth */ +&uart2 { + assigned-clocks = <&clk IMX8MM_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + fsl,dte-mode; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_bt>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&bt_osc_32k>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wakeup"; + interrupt-parent = <&gpio2>; + interrupts = <9 IRQ_TYPE_EDGE_BOTH>; + max-speed = <2000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt>; + shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + vddio-supply = <®_vcc_3v3>; + }; +}; + +/* UART - console */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +/* USB */ +&usbotg1 { + adp-disable; + dr_mode = "otg"; + over-current-active-low; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + srp-disable; + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + disable-over-current; + dr_mode = "host"; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + status = "okay"; +}; + +/* SDIO - Sterling-LWB Wifi */ +&usdhc1 { + assigned-clocks = <&clk IMX8MM_CLK_USDHC1>; + assigned-clock-rates = <200000000>; + bus-width = <4>; + mmc-pwrseq = <&usdhc1_pwrseq>; + non-removable; + no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_wlan>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + }; +}; + +/* SD-Card */ +&usdhc2 { + assigned-clocks = <&clk IMX8MM_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + vmmc-supply = <®_usdhc2_vmmc>; + vqmmc-supply = <®_nvcc_sd2>; + status = "okay"; +}; + +&iomuxc { + pinctrl_bt: btgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x00 + MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x00 + MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x00 + >; + }; + + pinctrl_can_en: can-engrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x00 + >; + }; + + pinctrl_can_int: can-intgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x00 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x80 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x80 + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x80 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x00 + >; + }; + + pinctrl_fan: fan0grp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x16 + >; + }; + + pinctrl_leds: leds1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x16 + MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x16 + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x16 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x00 + MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x12 + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x12 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x40 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x00 + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x00 + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x00 + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x00 + >; + }; + + pinctrl_uart2_bt: uart2btgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B 0x00 + MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B 0x00 + MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX 0x00 + MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX 0x00 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x40 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x40 + >; + }; + + pinctrl_usbotg1pwrgrp: usbotg1pwrgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x00 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x182 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0xc6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x40 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x192 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d2 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d2 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d2 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d2 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d2 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_wlan: wlangrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x00 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi new file mode 100644 index 000000000000..995b44efb1b6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi @@ -0,0 +1,440 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 PHYTEC Messtechnik GmbH + * Author: Teresa Remmet <t.remmet@phytec.de> + */ + +#include "imx8mm.dtsi" +#include <dt-bindings/net/ti-dp83867.h> + +/ { + model = "PHYTEC phyCORE-i.MX8MM"; + compatible = "phytec,imx8mm-phycore-som", "fsl,imx8mm"; + + aliases { + rtc0 = &rv3028; + rtc1 = &snvs_rtc; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + reg_vdd_3v3_s: regulator-vdd-3v3-s { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VDD_3V3_S"; + }; +}; + +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +/* Ethernet */ +&fec1 { + fsl,magic-packet; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + enet-phy-lane-no-swap; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + reg = <0>; + reset-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + }; + }; +}; + +/* SPI Flash */ +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; + status = "okay"; + + som_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + +&gpio1 { + gpio-line-names = "nINT_ETHPHY", "", "WDOG_INT", "X_RTC_INT", + "", "", "", "RESET_ETHPHY", + "", "", "nENABLE_FLATLINK"; +}; + +/* I2C1 */ +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default","gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic@8 { + compatible = "nxp,pf8121a"; + reg = <0x08>; + + regulators { + reg_nvcc_sd1: ldo1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "NVCC_SD1 (LDO1)"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_nvcc_sd2: ldo2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "NVCC_SD2 (LDO2)"; + vselect-en; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_vcc_enet: ldo3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <2500000>; + regulator-min-microvolt = <1500000>; + regulator-name = "VCC_ENET_2V5 (LDO3)"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_vdda_1v8: ldo4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1500000>; + regulator-name = "VDDA_1V8 (LDO4)"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-min-microvolt = <1500000>; + regulator-suspend-max-microvolt = <1500000>; + }; + }; + + reg_soc_vdda_phy: buck1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <900000>; + regulator-min-microvolt = <400000>; + regulator-name = "VDD_SOC_VDDA_PHY_0P8 (BUCK1)"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-min-microvolt = <400000>; + regulator-suspend-max-microvolt = <400000>; + }; + }; + + reg_vdd_gpu_dram: buck2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <1000000>; + regulator-name = "VDD_GPU_DRAM (BUCK2)"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1000000>; + regulator-suspend-min-microvolt = <1000000>; + }; + }; + + reg_vdd_gpu: buck3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <400000>; + regulator-name = "VDD_VPU (BUCK3)"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_vdd_mipi: buck4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1050000>; + regulator-min-microvolt = <900000>; + regulator-name = "VDD_MIPI_0P9 (BUCK4)"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_vdd_arm: buck5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1050000>; + regulator-min-microvolt = <400000>; + regulator-name = "VDD_ARM (BUCK5)"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_vdd_1v8: buck6 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "VDD_1V8 (BUCK6)"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1800000>; + regulator-suspend-min-microvolt = <1800000>; + }; + }; + + reg_nvcc_dram: buck7 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + regulator-name = "NVCC_DRAM_1P1V (BUCK7)"; + }; + + reg_vsnvs: vsnvs { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "NVCC_SNVS_1P8 (VSNVS)"; + }; + }; + }; + + sn65dsi83: bridge@2d { + compatible = "ti,sn65dsi83"; + enable-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sn65dsi83>; + reg = <0x2d>; + status = "disabled"; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + pagesize = <32>; + reg = <0x51>; + vcc-supply = <®_vdd_3v3_s>; + }; + + rv3028: rtc@52 { + compatible = "microcrystal,rv3028"; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + reg = <0x52>; + }; +}; + +/* EMMC */ +&usdhc3 { + assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + keep-power-in-suspend; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + non-removable; + status = "okay"; +}; + +/* Watchdog */ +&wdog1 { + fsl,ext-reset-output; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x2 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x2 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x90 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x90 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x90 + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x90 + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x90 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x90 + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x16 + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x16 + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x16 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x16 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x16 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x16 + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x10 + >; + }; + + pinctrl_flexspi0: flexspi0grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2 + MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c0 + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c0 + >; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x1e0 + MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x1e0 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x1c0 + >; + }; + + pinctrl_sn65dsi83: sn65dsi83grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x26 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts index ac1fe1530ac7..d643381417f1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts @@ -36,19 +36,19 @@ gpio-keys { compatible = "gpio-keys"; - back { + key-back { label = "Back"; gpios = <&pca9534 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; }; - home { + key-home { label = "Home"; gpios = <&pca9534 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; }; - menu { + key-menu { label = "Menu"; gpios = <&pca9534 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi index 00f86cada30d..66a0d103c90f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi @@ -16,13 +16,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -36,14 +36,14 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; @@ -286,8 +286,8 @@ regulator-name = "buck1"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1000000>; - regulator-min-microamp = <3800000>; - regulator-max-microamp = <6800000>; + regulator-min-microamp = <3800000>; + regulator-max-microamp = <6800000>; regulator-boot-on; regulator-always-on; }; @@ -297,8 +297,8 @@ regulator-name = "buck2"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; - regulator-min-microamp = <2200000>; - regulator-max-microamp = <5200000>; + regulator-min-microamp = <2200000>; + regulator-max-microamp = <5200000>; regulator-boot-on; regulator-always-on; }; @@ -308,8 +308,8 @@ regulator-name = "buck3"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1000000>; - regulator-min-microamp = <3800000>; - regulator-max-microamp = <6800000>; + regulator-min-microamp = <3800000>; + regulator-max-microamp = <6800000>; regulator-always-on; }; @@ -318,8 +318,8 @@ regulator-name = "buck4"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-min-microamp = <2200000>; - regulator-max-microamp = <5200000>; + regulator-min-microamp = <2200000>; + regulator-max-microamp = <5200000>; regulator-boot-on; regulator-always-on; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index 24737e89038a..35fb929e7bcc 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -38,13 +38,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -58,14 +58,14 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index 407ab4592b4c..6dc5eda2d256 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -42,13 +42,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -62,14 +62,14 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; @@ -651,7 +651,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; - cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts index a7dae9bd4c11..a65761a53f23 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts @@ -33,13 +33,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -53,7 +53,7 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index eafa88d980b3..d1b4582f44c4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -43,7 +43,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - wakeup { + key-wakeup { debounce-interval = <10>; /* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */ gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; @@ -154,6 +154,14 @@ cpu-supply = <®_vdd_arm>; }; +&cpu_alert0 { + temperature = <95000>; +}; + +&cpu_crit0 { + temperature = <105000>; +}; + &ddrc { operating-points-v2 = <&ddrc_opp_table>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 1bf070473829..afb90f59c83c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -212,7 +212,7 @@ clk_ext4: clock-ext4 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency= <133000000>; + clock-frequency = <133000000>; clock-output-names = "clk_ext4"; }; @@ -287,7 +287,7 @@ clock-names = "main_clk"; }; - soc@0 { + soc: soc@0 { compatible = "fsl,imx8mm-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -602,6 +602,11 @@ wakeup-source; status = "disabled"; }; + + snvs_lpgpr: snvs-lpgpr { + compatible = "fsl,imx8mm-snvs-lpgpr", + "fsl,imx7d-snvs-lpgpr"; + }; }; clk: clock-controller@30380000 { @@ -911,6 +916,7 @@ compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; sec_jr1: jr@2000 { @@ -995,7 +1001,7 @@ <&clk IMX8MM_CLK_USDHC1_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; @@ -1009,7 +1015,7 @@ <&clk IMX8MM_CLK_USDHC2_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; @@ -1023,7 +1029,7 @@ <&clk IMX8MM_CLK_USDHC3_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi index 02f37dcda7ed..9e82069c941f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi @@ -146,7 +146,7 @@ }; &easrc { - fsl,asrc-rate = <48000>; + fsl,asrc-rate = <48000>; status = "okay"; }; @@ -182,7 +182,7 @@ &usbotg1 { vbus-supply = <®_usb_otg_vbus>; disable-over-current; - dr_mode="otg"; + dr_mode = "otg"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index d1f6cccfa00d..261c36540079 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -47,6 +47,11 @@ linux,autosuspend-period = <125>; }; + audio_codec_bt_sco: audio-codec-bt-sco { + compatible = "linux,bt-sco"; + #sound-dai-cells = <1>; + }; + wm8524: audio-codec { #sound-dai-cells = <0>; compatible = "wlf,wm8524"; @@ -57,6 +62,25 @@ clock-names = "mclk"; }; + sound-bt-sco { + compatible = "simple-audio-card"; + simple-audio-card,name = "bt-sco-audio"; + simple-audio-card,format = "dsp_a"; + simple-audio-card,bitclock-inversion; + simple-audio-card,frame-master = <&btcpu>; + simple-audio-card,bitclock-master = <&btcpu>; + + btcpu: simple-audio-card,cpu { + sound-dai = <&sai2>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + + simple-audio-card,codec { + sound-dai = <&audio_codec_bt_sco 1>; + }; + }; + sound-wm8524 { compatible = "fsl,imx-audio-wm8524"; model = "wm8524-audio"; @@ -78,7 +102,7 @@ }; &easrc { - fsl,asrc-rate = <48000>; + fsl,asrc-rate = <48000>; status = "okay"; }; @@ -183,6 +207,16 @@ }; }; +&sai2 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MN_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + &sai3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai3>; @@ -354,6 +388,15 @@ >; }; + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MN_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + MX8MN_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + MX8MN_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + MX8MN_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 + >; + }; + pinctrl_sai3: sai3grp { fsl,pins = < MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts index f61c48776cf3..3ed7021a487c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts @@ -26,19 +26,19 @@ gpio-keys { compatible = "gpio-keys"; - back { + key-back { label = "Back"; gpios = <&pca9534 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; }; - home { + key-home { label = "Home"; gpios = <&pca9534 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; }; - menu { + key-menu { label = "Menu"; gpios = <&pca9534 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts index 367a232675aa..636f8602b979 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts @@ -39,13 +39,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -59,14 +59,14 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index e41e1d56f980..0c71b740a316 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -212,7 +212,7 @@ clk_ext4: clock-ext4 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency= <133000000>; + clock-frequency = <133000000>; clock-output-names = "clk_ext4"; }; @@ -269,7 +269,7 @@ arm,no-tick-in-suspend; }; - soc@0 { + soc: soc@0 { compatible = "fsl,imx8mn-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -422,7 +422,7 @@ "ctx2_rx", "ctx2_tx", "ctx3_rx", "ctx3_tx"; firmware-name = "imx/easrc/easrc-imx8mn.bin"; - fsl,asrc-rate = <8000>; + fsl,asrc-rate = <8000>; fsl,asrc-format = <2>; status = "disabled"; }; @@ -857,6 +857,7 @@ compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; sec_jr1: jr@2000 { @@ -941,7 +942,7 @@ <&clk IMX8MN_CLK_USDHC1_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; @@ -955,7 +956,7 @@ <&clk IMX8MN_CLK_USDHC2_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; @@ -969,7 +970,7 @@ <&clk IMX8MN_CLK_USDHC3_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts new file mode 100644 index 000000000000..2ca2ede2e94e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts @@ -0,0 +1,163 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2022 Marek Vasut <marex@denx.de> + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/qca-ar803x.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> +#include "imx8mp-dhcom-som.dtsi" + +/ { + model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (2)"; + compatible = "dh,imx8mp-dhcom-pdk2", "fsl,imx8mp"; + + chosen { + stdout-path = &uart1; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-0 { + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; /* GPIO A */ + label = "TA1-GPIO-A"; + linux,code = <KEY_A>; + pinctrl-0 = <&pinctrl_dhcom_a>; + pinctrl-names = "default"; + wakeup-source; + }; + + button-1 { + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; /* GPIO B */ + label = "TA2-GPIO-B"; + linux,code = <KEY_B>; + pinctrl-0 = <&pinctrl_dhcom_b>; + pinctrl-names = "default"; + wakeup-source; + }; + + button-2 { + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */ + label = "TA3-GPIO-C"; + linux,code = <KEY_C>; + pinctrl-0 = <&pinctrl_dhcom_c>; + pinctrl-names = "default"; + wakeup-source; + }; + + button-3 { + gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; /* GPIO D */ + label = "TA4-GPIO-D"; + linux,code = <KEY_D>; + pinctrl-0 = <&pinctrl_dhcom_d>; + pinctrl-names = "default"; + wakeup-source; + }; + }; + + led { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* GPIO E */ + pinctrl-0 = <&pinctrl_dhcom_e>; + pinctrl-names = "default"; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */ + pinctrl-0 = <&pinctrl_dhcom_f>; + pinctrl-names = "default"; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; /* GPIO H */ + pinctrl-0 = <&pinctrl_dhcom_h>; + pinctrl-names = "default"; + }; + + led-3 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */ + pinctrl-0 = <&pinctrl_dhcom_i>; + pinctrl-names = "default"; + }; + }; +}; + +/* + * PDK2 carrier board uses SoM with KSZ9131 populated and connected to + * SoM EQoS ethernet RGMII interface. Remove the other SoM PHY DT node. + */ +/delete-node/ ðphy0f; + +/* + * PDK2 carrier board has KSZ9021 PHY populated and connected to SoM FEC + * ethernet RGMII interface. The SoM is not populated with second FEC PHY. + */ +/delete-node/ ðphy1f; + +&fec { /* Second ethernet */ + phy-handle = <ðphypdk>; + + mdio { + ethphypdk: ethernet-phy@7 { /* KSZ 9021 */ + compatible = "ethernet-phy-ieee802.3-c22"; + pinctrl-0 = <&pinctrl_ethphy1>; + pinctrl-names = "default"; + interrupt-parent = <&gpio4>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + max-speed = <100>; + reg = <7>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + rxdv-skew-ps = <0>; + txc-skew-ps = <3000>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + txen-skew-ps = <0>; + }; + }; +}; + +&flexcan1 { + status = "okay"; +}; + +&usb3_1 { + fsl,over-current-active-low; +}; + +&iomuxc { + /* + * GPIO_A,B,C,D are connected to buttons. + * GPIO_E,F,H,I are connected to LEDs. + * GPIO_M is connected to CLKOUT2. + */ + pinctrl-0 = <&pinctrl_hog_base + &pinctrl_dhcom_g &pinctrl_dhcom_j + &pinctrl_dhcom_k &pinctrl_dhcom_l + &pinctrl_dhcom_int>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi new file mode 100644 index 000000000000..a616eb378002 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi @@ -0,0 +1,1030 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021-2022 Marek Vasut <marex@denx.de> + */ + +#include "imx8mp.dtsi" + +/ { + model = "DH electronics i.MX8M Plus DHCOM SoM"; + compatible = "dh,imx8mp-dhcom-som", "fsl,imx8mp"; + + aliases { + ethernet0 = &eqos; + ethernet1 = &fec; + rtc0 = &rv3032; + rtc1 = &snvs_rtc; + spi0 = &flexspi; + }; + + memory@40000000 { + device_type = "memory"; + /* Memory size 512 MiB..8 GiB will be filled by U-Boot */ + reg = <0x0 0x40000000 0 0x08000000>; + }; + + reg_eth_vio: regulator-eth-vio { + compatible = "regulator-fixed"; + gpio = <&gpio2 10 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pinctrl_enet_vio>; + pinctrl-names = "default"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "eth_vio"; + vin-supply = <&buck4>; + }; + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 19 0>; /* SD2_RESET */ + off-on-delay-us = <12000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_vmmc>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VDD_3V3_SD"; + startup-delay-us = <100>; + vin-supply = <&buck4>; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "disabled"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "disabled"; +}; + +&eqos { /* First ethernet */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-handle = <ðphy0g>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* Up to one of these two PHYs may be populated. */ + ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */ + compatible = "ethernet-phy-id0007.c110", + "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio3>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pinctrl_ethphy0>; + pinctrl-names = "default"; + reg = <1>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + /* Non-default PHY population option. */ + status = "disabled"; + }; + + ethphy0g: ethernet-phy@5 { /* Micrel KSZ9131RNXI */ + compatible = "ethernet-phy-id0022.1642", + "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio3>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <0>; + pinctrl-0 = <&pinctrl_ethphy0>; + pinctrl-names = "default"; + reg = <5>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + /* Default PHY population option. */ + status = "okay"; + }; + }; +}; + +&fec { /* Second ethernet */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-handle = <ðphy1f>; + phy-mode = "rgmii"; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Up to one PHY may be populated. */ + ethphy1f: ethernet-phy@1 { /* SMSC LAN8740Ai */ + compatible = "ethernet-phy-id0007.c110", + "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio4>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pinctrl_ethphy1>; + pinctrl-names = "default"; + reg = <1>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + /* Non-default PHY population option. */ + status = "disabled"; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "disabled"; +}; + +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi>; + status = "okay"; + + flash@0 { /* W25Q128JWPIM */ + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&gpio1 { + gpio-line-names = + "DHCOM-G", "", "", "", "", "DHCOM-I", "DHCOM-J", "DHCOM-L", + "DHCOM-B", "DHCOM-A", "", "DHCOM-H", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "DHCOM-K", "", "", "", "", + "", "", "", "", "DHCOM-INT", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "SOM-HW0", "", + "", "", "", "", "", "", "SOM-MEM0", "SOM-MEM1", + "SOM-MEM2", "SOM-HW2", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "SOM-HW1", "", "", "", "", + "", "", "", "DHCOM-D", "", "", "", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "DHCOM-C", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "DHCOM-E", "DHCOM-F", + "", "", "", "", "", "", "", ""; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic: pmic@25 { + compatible = "nxp,pca9450c"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + + /* + * i.MX 8M Plus Data Sheet for Consumer Products + * 3.1.4 Operating ranges + * MIMX8ML8CVNKZAB + */ + regulators { + buck1: BUCK1 { /* VDD_SOC (dual-phase with BUCK3) */ + regulator-compatible = "BUCK1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-ramp-delay = <3125>; + regulator-always-on; + regulator-boot-on; + }; + + buck2: BUCK2 { /* VDD_ARM */ + regulator-compatible = "BUCK2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-ramp-delay = <3125>; + regulator-always-on; + regulator-boot-on; + }; + + buck4: BUCK4 { /* VDD_3V3 */ + regulator-compatible = "BUCK4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5: BUCK5 { /* VDD_1V8 */ + regulator-compatible = "BUCK5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6: BUCK6 { /* NVCC_DRAM_1V1 */ + regulator-compatible = "BUCK6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1: LDO1 { /* NVCC_SNVS_1V8 */ + regulator-compatible = "LDO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3: LDO3 { /* VDDA_1V8 */ + regulator-compatible = "LDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4: LDO4 { /* PMIC_LDO4 */ + regulator-compatible = "LDO4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5: LDO5 { /* NVCC_SD2 */ + regulator-compatible = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + adc@48 { + compatible = "ti,tla2024"; + reg = <0x48>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { /* Voltage over AIN0 and AIN1. */ + reg = <0>; + }; + + channel@1 { /* Voltage over AIN0 and AIN3. */ + reg = <1>; + }; + + channel@2 { /* Voltage over AIN1 and AIN3. */ + reg = <2>; + }; + + channel@3 { /* Voltage over AIN2 and AIN3. */ + reg = <3>; + }; + + channel@4 { /* Voltage over AIN0 and GND. */ + reg = <4>; + }; + + channel@5 { /* Voltage over AIN1 and GND. */ + reg = <5>; + }; + + channel@6 { /* Voltage over AIN2 and GND. */ + reg = <6>; + }; + + channel@7 { /* Voltage over AIN3 and GND. */ + reg = <7>; + }; + }; + + touchscreen@49 { + compatible = "ti,tsc2004"; + reg = <0x49>; + interrupts-extended = <&gpio4 0 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch>; + vio-supply = <&buck4>; + }; + + eeprom0: eeprom@50 { /* EEPROM with EQoS MAC address */ + compatible = "atmel,24c02"; + pagesize = <16>; + reg = <0x50>; + }; + + rv3032: rtc@51 { + compatible = "microcrystal,rv3032"; + reg = <0x51>; + interrupts-extended = <&gpio5 5 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + }; + + eeprom1: eeprom@53 { /* EEPROM with FEC MAC address */ + compatible = "atmel,24c02"; + pagesize = <16>; + reg = <0x53>; + }; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c5 { /* HDMI EDID bus */ + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c5>; + pinctrl-1 = <&pinctrl_i2c5_gpio>; + scl-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&pwm1 { + pinctrl-0 = <&pinctrl_pwm1>; + pinctrl-names = "default"; + status = "disabled"; +}; + +&uart1 { + /* CA53 console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + /* Bluetooth */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb_dwc3_0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_vbus>; + dr_mode = "otg"; + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb_dwc3_1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +/* SDIO WiFi */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <&buck4>; + bus-width = <4>; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + brcmf: bcrmf@1 { /* muRata 2AE */ + reg = <1>; + compatible = "cypress,cyw4373-fmac", "brcm,bcm4329-fmac"; + /* + * The "host-wake" interrupt output is by default not + * connected to the SoC, but can be connected on to + * SoC pin on the carrier board. + */ + reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; +}; + +/* SD slot */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + vmmc-supply = <&buck4>; + vqmmc-supply = <&buck5>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_hog_base + &pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c + &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f + &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i + &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l + /* GPIO_M is connected to CLKOUT2 */ + &pinctrl_dhcom_int>; + pinctrl-names = "default"; + + pinctrl_dhcom_a: dhcom-a-grp { + fsl,pins = < + /* ENET_QOS_EVENT0-OUT */ + MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x2 + >; + }; + + pinctrl_dhcom_b: dhcom-b-grp { + fsl,pins = < + /* ENET_QOS_EVENT0-IN */ + MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x2 + >; + }; + + pinctrl_dhcom_c: dhcom-c-grp { + fsl,pins = < + /* GPIO_C */ + MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x2 + >; + }; + + pinctrl_dhcom_d: dhcom-d-grp { + fsl,pins = < + /* GPIO_D */ + MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x2 + >; + }; + + pinctrl_dhcom_e: dhcom-e-grp { + fsl,pins = < + /* GPIO_E */ + MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22 0x2 + >; + }; + + pinctrl_dhcom_f: dhcom-f-grp { + fsl,pins = < + /* GPIO_F */ + MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23 0x2 + >; + }; + + pinctrl_dhcom_g: dhcom-g-grp { + fsl,pins = < + /* GPIO_G */ + MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x2 + >; + }; + + pinctrl_dhcom_h: dhcom-h-grp { + fsl,pins = < + /* GPIO_H */ + MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x2 + >; + }; + + pinctrl_dhcom_i: dhcom-i-grp { + fsl,pins = < + /* CSI1_SYNC */ + MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x2 + >; + }; + + pinctrl_dhcom_j: dhcom-j-grp { + fsl,pins = < + /* CSIx_#RST */ + MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x2 + >; + }; + + pinctrl_dhcom_k: dhcom-k-grp { + fsl,pins = < + /* CSIx_PWDN */ + MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x2 + >; + }; + + pinctrl_dhcom_l: dhcom-l-grp { + fsl,pins = < + /* CSI2_SYNC */ + MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x2 + >; + }; + + pinctrl_dhcom_int: dhcom-int-grp { + fsl,pins = < + /* INT_HIGHEST_PRIO */ + MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x2 + >; + }; + + pinctrl_hog_base: dhcom-hog-base-grp { + fsl,pins = < + /* GPIOs for memory coding */ + MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22 0x40000080 + MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x40000080 + MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x40000080 + /* GPIOs for hardware coding */ + MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000080 + MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x40000080 + MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25 0x40000080 + >; + }; + + pinctrl_ecspi1: dhcom-ecspi1-grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x44 + MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x44 + MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x44 + MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40 + >; + }; + + pinctrl_ecspi2: dhcom-ecspi2-grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x44 + MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x44 + MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x44 + MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40 + >; + }; + + pinctrl_eqos: dhcom-eqos-grp { /* RGMII */ + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 + >; + }; + + pinctrl_enet_vio: dhcom-enet-vio-grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x22 + >; + }; + + pinctrl_ethphy0: dhcom-ethphy0-grp { + fsl,pins = < + /* ENET1_#RST Reset */ + MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x22 + /* ENET1_#INT Interrupt */ + MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x22 + >; + }; + + pinctrl_ethphy1: dhcom-ethphy1-grp { + fsl,pins = < + /* ENET1_#RST Reset */ + MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x11 + /* ENET1_#INT Interrupt */ + MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x11 + >; + }; + + pinctrl_fec: dhcom-fec-grp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK 0x1f + MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 + MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 + MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 + MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 + MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f + MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER 0x1f + >; + }; + + pinctrl_flexcan1: dhcom-flexcan1-grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 + MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154 + >; + }; + + pinctrl_flexcan2: dhcom-flexcan2-grp { + fsl,pins = < + MX8MP_IOMUXC_UART3_RXD__CAN2_TX 0x154 + MX8MP_IOMUXC_UART3_TXD__CAN2_RX 0x154 + >; + }; + + pinctrl_flexspi: dhcom-flexspi-grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2 + MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82 + MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82 + MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82 + MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82 + MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82 + >; + }; + + pinctrl_hdmi: dhcom-hdmi-grp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x154 + MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x154 + >; + }; + + pinctrl_i2c3: dhcom-i2c3-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x40000084 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x40000084 + >; + }; + + pinctrl_i2c3_gpio: dhcom-i2c3-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x84 + MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x84 + >; + }; + + pinctrl_i2c4: dhcom-i2c4-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x40000084 + MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x40000084 + >; + }; + + pinctrl_i2c4_gpio: dhcom-i2c4-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x84 + MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x84 + >; + }; + + pinctrl_i2c5: dhcom-i2c5-grp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL 0x40000084 + MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA 0x40000084 + >; + }; + + pinctrl_i2c5_gpio: dhcom-i2c5-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26 0x84 + MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27 0x84 + >; + }; + + pinctrl_pmic: dhcom-pmic-grp { + fsl,pins = < + /* PMIC_nINT */ + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x40000090 + >; + }; + + pinctrl_pwm1: dhcom-pwm1-grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT 0x6 + >; + }; + + pinctrl_rtc: dhcom-rtc-grp { + fsl,pins = < + /* RTC_#INT Interrupt */ + MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x40000080 + >; + }; + + pinctrl_touch: dhcom-touch-grp { + fsl,pins = < + /* #TOUCH_INT */ + MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x40000080 + >; + }; + + pinctrl_uart1: dhcom-uart1-grp { + fsl,pins = < + /* Console UART */ + MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX 0x49 + MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX 0x49 + MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x49 + MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS 0x49 + >; + }; + + pinctrl_uart2: dhcom-uart2-grp { + fsl,pins = < + /* Bluetooth UART */ + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49 + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49 + MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS 0x49 + MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS 0x49 + >; + }; + + pinctrl_uart3: dhcom-uart3-grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX 0x49 + MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX 0x49 + MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS 0x49 + MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS 0x49 + >; + }; + + pinctrl_uart4: dhcom-uart4-grp { + fsl,pins = < + MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49 + MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49 + >; + }; + + pinctrl_usb0_vbus: dhcom-usb0-grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID 0x0 + >; + }; + + pinctrl_usb1_vbus: dhcom-usb1-grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x6 + MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC 0x80 + >; + }; + + pinctrl_usdhc1: dhcom-usdhc1-grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190 + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0 + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0 + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0 + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0 + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0 + /* BT_REG_EN */ + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144 + /* WL_REG_EN */ + MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144 + >; + }; + + pinctrl_usdhc1_100mhz: dhcom-usdhc1-100mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194 + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4 + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4 + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4 + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4 + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4 + /* BT_REG_EN */ + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144 + /* WL_REG_EN */ + MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144 + >; + }; + + pinctrl_usdhc1_200mhz: dhcom-usdhc1-200mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196 + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6 + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6 + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6 + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6 + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6 + /* BT_REG_EN */ + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144 + /* WL_REG_EN */ + MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144 + >; + }; + + pinctrl_usdhc2: dhcom-usdhc2-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: dhcom-usdhc2-100mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: dhcom-usdhc2-200mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_vmmc: dhcom-usdhc2-vmmc-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x20 + >; + }; + + pinctrl_usdhc2_gpio: dhcom-usdhc2-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x40000080 + >; + }; + + pinctrl_usdhc3: dhcom-usdhc3-grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141 + >; + }; + + pinctrl_usdhc3_100mhz: dhcom-usdhc3-100mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141 + >; + }; + + pinctrl_usdhc3_200mhz: dhcom-usdhc3-200mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141 + >; + }; + + pinctrl_wdog: dhcom-wdog-grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 9a4de739e6a2..f6b017ab5f53 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -67,18 +67,20 @@ }; }; -&flexcan1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; - xceiver-supply = <®_can1_stby>; - status = "okay"; +&A53_0 { + cpu-supply = <®_arm>; }; -&flexcan2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2>; - xceiver-supply = <®_can2_stby>; - status = "disabled";/* can2 pin conflict with pdm */ +&A53_1 { + cpu-supply = <®_arm>; +}; + +&A53_2 { + cpu-supply = <®_arm>; +}; + +&A53_3 { + cpu-supply = <®_arm>; }; &eqos { @@ -197,6 +199,20 @@ }; }; +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can2_stby>; + status = "disabled";/* can2 pin conflict with pdm */ +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -221,7 +237,7 @@ regulator-ramp-delay = <3125>; }; - BUCK2 { + reg_arm: BUCK2 { regulator-name = "BUCK2"; regulator-min-microvolt = <720000>; regulator-max-microvolt = <1025000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts new file mode 100644 index 000000000000..d8ca52976170 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -0,0 +1,702 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2021-2022 TQ-Systems GmbH + * Author: Alexander Stein <alexander.stein@tq-group.com> + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/pwm/pwm.h> +#include "imx8mp-tqma8mpql.dtsi" + +/ { + model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL"; + compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp"; + + chosen { + stdout-path = &uart4; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>; + }; + + aliases { + mmc0 = &usdhc3; + mmc1 = &usdhc2; + mmc2 = &usdhc1; + rtc0 = &pcf85063; + rtc1 = &snvs_rtc; + spi0 = &flexspi; + spi1 = &ecspi1; + spi2 = &ecspi2; + spi3 = &ecspi3; + }; + + backlight_lvds: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm2 0 5000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_vcc_12v0>; + enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiobutton>; + autorepeat; + + switch-1 { + label = "S12"; + linux,code = <BTN_0>; + gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; + }; + + switch-2 { + label = "S13"; + linux,code = <BTN_1>; + gpios = <&gpio5 27 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpioled>; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + function-enumerator = <0>; + gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-2 { + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_STATUS; + function-enumerator = <1>; + gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; + }; + }; + + display: display { + /* + * Display is not fixed, so compatible has to be added from + * DT overlay + */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvdsdisplay>; + power-supply = <®_vcc_3v3>; + enable-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; + backlight = <&backlight_lvds>; + status = "disabled"; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + off-on-delay-us = <12000>; + }; + + reg_vcc_12v0: regulator-12v0 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg12v0>; + regulator-name = "VCC_12V0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vcc_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ocram: ocram@900000 { + no-map; + reg = <0 0x900000 0 0x70000>; + }; + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0 0x38000000>; + alloc-ranges = <0 0x40000000 0 0xB0000000>; + linux,cma-default; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; + status = "okay"; + + adc: adc@0 { + reg = <0>; + compatible = "microchip,mcp3202"; + /* 100 ksps * 18 */ + spi-max-frequency = <1800000>; + vref-supply = <®_vcc_3v3>; + #io-channel-cells = <1>; + }; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>, <&pinctrl_eqos_phy>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy3>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy3: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,dp83867-rxctrl-strap-quirk; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + reset-assert-us = <500000>; + reset-deassert-us = <50000>; + enet-phy-lane-no-swap; + interrupt-parent = <&gpio4>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>, <&pinctrl_fec_phy>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,dp83867-rxctrl-strap-quirk; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; + reset-assert-us = <500000>; + reset-deassert-us = <50000>; + enet-phy-lane-no-swap; + interrupt-parent = <&gpio4>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_vcc_3v3>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_vcc_3v3>; + status = "okay"; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1>; + + gpio-line-names = "GPO1", "GPO0", "", "GPO3", + "", "", "GPO2", "GPI0", + "PMIC_IRQ", "GPI1", "OTG_ID", "USB_HUB_RST#", + "OTG_PWR", "", "GPI2", "GPI3", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hoggpio2>; + + gpio-line-names = "", "", "", "", + "", "", "VCC12V_EN", "PERST#", + "", "", "CLKREQ#", "PEWAKE#", + "USDHC2_CD", "", "", "", + "", "", "", "V_SD3V3_EN", + "", "", "", "", + "", "", "", "", + "", "", "", ""; + + perst-hog { + gpio-hog; + gpios = <7 0>; + output-high; + line-name = "PERST#"; + }; + + clkreq-hog { + gpio-hog; + gpios = <10 0>; + input; + line-name = "CLKREQ#"; + }; + + pewake-hog { + gpio-hog; + gpios = <11 0>; + input; + line-name = "PEWAKE#"; + }; +}; + +&gpio3 { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "LVDS0_RESET#", "", + "", "", "", "LVDS0_BLT_EN", + "LVDS0_PWR_EN", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio4>; + + gpio-line-names = "ENET0_RST#", "ENET0_INT#", "ENET1_RST#", "ENET1_INT#", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "DP_IRQ", "DSI_EN", + "HDMI_OC#", "TEMP_EVENT#", "PCIE_CLK_OE#", "", + "", "", "", "FAN_PWR", + "RTC_EVENT#", "CODEC_RST#", "", ""; +}; + +&gpio5 { + gpio-line-names = "", "", "", "LED2", + "LED1", "LED0", "CSI0_RESET#", "CSI0_SYNC", + "CSI0_TRIGGER", "CSI0_ENABLE", "", "", + "", "ECSPI2_SS0", "", "", + "", "", "", "", + "", "", "", "", + "", "ECSPI3_SS0", "SWITCH_A", "SWITCH_B", + "", "", "", ""; +}; + +&i2c2 { + clock-frequency = <384000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + /* NXP SE97BTP with temperature sensor + eeprom */ + se97_1c: temperature-sensor-eeprom@1c { + compatible = "nxp,se97", "jedec,jc-42.4-temp"; + reg = <0x1c>; + }; + + at24c02_54: eeprom@54 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x54>; + pagesize = <16>; + vcc-supply = <®_vcc_3v3>; + }; +}; + +&i2c4 { + clock-frequency = <384000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c6 { + clock-frequency = <384000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c6>; + pinctrl-1 = <&pinctrl_i2c6_gpio>; + scl-gpios = <&gpio2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&pcf85063 { + /* RTC_EVENT# is connected on MBa8MPxL */ + interrupt-parent = <&gpio4>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clk IMX8MP_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clk IMX8MP_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clk IMX8MP_CLK_UART3>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; + status = "okay"; +}; + +&uart4 { + /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + no-mmc; + no-sdio; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&iomuxc { + pinctrl_backlight: backlightgrp { + fsl,pins = <MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x14>; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = <MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x150>, + <MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x150>; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = <MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x150>, + <MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x150>; + }; + + /* only on X57, primary used as CSI0 control signals */ + pinctrl_ecspi1: ecspi1grp { + fsl,pins = <MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x1c0>, + <MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x1c0>, + <MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x1c0>, + <MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x1c0>; + }; + + /* on X63 and optionally on X57, can also be used as CSI1 control signals */ + pinctrl_ecspi2: ecspi2grp { + fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x1c0>, + <MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x1c0>, + <MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x1c0>, + <MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x1c0>; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = <MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI 0x1c0>, + <MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK 0x1c0>, + <MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO 0x1c0>, + <MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25 0x1c0>; + }; + + pinctrl_eqos: eqosgrp { + fsl,pins = <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x40000044>, + <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x40000044>, + <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90>, + <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90>, + <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90>, + <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90>, + <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90>, + <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90>, + <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x12>, + <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x12>, + <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x12>, + <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x12>, + <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x12>, + <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x14>; + }; + + pinctrl_eqos_event: eqosevtgrp { + fsl,pins = <MX8MP_IOMUXC_SAI2_RXD0__ENET_QOS_1588_EVENT2_OUT 0x100>, + <MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_IN 0x1c0>; + }; + + pinctrl_eqos_phy: eqosphygrp { + fsl,pins = <MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x100>, + <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x1c0>; + }; + + pinctrl_fec: fecgrp { + fsl,pins = <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x40000044>, + <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x40000044>, + <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90>, + <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90>, + <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90>, + <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90>, + <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90>, + <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90>, + <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x12>, + <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x12>, + <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x12>, + <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x12>, + <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x12>, + <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x14>; + }; + + pinctrl_fec_event: fecevtgrp { + fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x100>, + <MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x1c0>; + }; + + pinctrl_fec_phy: fecphygrp { + fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x100>, + <MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x1c0>; + }; + + pinctrl_fec_phyalt: fecphyaltgrp { + fsl,pins = <MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x180>, + <MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x180>; + }; + + pinctrl_gpiobutton: gpiobuttongrp { + fsl,pins = <MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26 0x10>, + <MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27 0x10>; + }; + + pinctrl_gpioled: gpioledgrp { + fsl,pins = <MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x14>, + <MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04 0x14>, + <MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03 0x14>; + }; + + pinctrl_gpio1: gpio1grp { + fsl,pins = <MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x10>, + <MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x10>, + <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x10>, + <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x10>, + <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x80>, + <MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x80>, + <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x80>, + <MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x80>; + }; + + pinctrl_gpio4: gpio4grp { + fsl,pins = <MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x180>, + <MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x180>; + }; + + pinctrl_hdmi: hdmigrp { + fsl,pins = <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c2>, + <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c2>, + <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000010>, + <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000010>; + }; + + pinctrl_hoggpio2: hoggpio2grp { + fsl,pins = <MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x140>, + <MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x140>, + <MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x140>; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001e2>, + <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001e2>; + }; + + pinctrl_i2c2_gpio: i2c2-gpiogrp { + fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x400001e2>, + <MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x400001e2>; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001e2>, + <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001e2>; + }; + + pinctrl_i2c4_gpio: i2c4-gpiogrp { + fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x400001e2>, + <MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x400001e2>; + }; + + pinctrl_i2c6: i2c6grp { + fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL 0x400001e2>, + <MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA 0x400001e2>; + }; + + pinctrl_i2c6_gpio: i2c6-gpiogrp { + fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02 0x400001e2>, + <MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03 0x400001e2>; + }; + + pinctrl_lvdsdisplay: lvdsdisplaygrp { + fsl,pins = <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x10>; /* Power enable */ + }; + + /* LVDS Backlight */ + pinctrl_pwm2: pwm2grp { + fsl,pins = <MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT 0x14>; + }; + + /* FAN */ + pinctrl_pwm3: pwm3grp { + fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT 0x14>; + }; + + pinctrl_reg12v0: reg12v0grp { + fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x140>; /* VCC12V enable */ + }; + + /* X61 */ + pinctrl_uart1: uart1grp { + fsl,pins = <MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX 0x140>, + <MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX 0x140>; + }; + + /* X61 */ + pinctrl_uart2: uart2grp { + fsl,pins = <MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX 0x140>, + <MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX 0x140>; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = <MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX 0x140>, + <MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX 0x140>; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x140>, + <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140>; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x192>, + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d2>, + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d2>, + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d2>, + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d2>, + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d2>, + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194>, + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>, + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194>, + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>, + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>; + }; + + pinctrl_usdhc2_gpio: usdhc2-gpiogrp { + fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c0>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi new file mode 100644 index 000000000000..7bd680a926ce --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi @@ -0,0 +1,284 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2021-2022 TQ-Systems GmbH + * Author: Alexander Stein <alexander.stein@tq-group.com> + */ + +#include "imx8mp.dtsi" + +/ { + model = "TQ-Systems i.MX8MPlus TQMa8MPxL"; + compatible = "tq,imx8mp-tqma8mpql", "fsl,imx8mp"; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + /* identical to buck4_reg, but should never change */ + reg_vcc3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* e-MMC IO, needed for HS modes */ + reg_vcc1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; + status = "okay"; + + flash0: flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + }; +}; + +&i2c1 { + clock-frequency = <384000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + /* NXP SE97BTP with temperature sensor + eeprom */ + se97: temperature-sensor-eeprom@1b { + compatible = "nxp,se97", "jedec,jc-42.4-temp"; + reg = <0x1b>; + }; + + pmic: pmic@25 { + reg = <0x25>; + compatible = "nxp,pca9450c"; + + /* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */ + pinctrl-0 = <&pinctrl_pmic>; + pinctrl-names = "default"; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + + regulators { + /* V_0V85_SOC: 0.85 .. 0.95 */ + buck1_reg: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + /* VDD_ARM */ + buck2_reg: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + regulator-ramp-delay = <3125>; + }; + + /* VCC3V3 -> VMMC, ... must not be changed */ + buck4_reg: BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */ + buck5_reg: BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V1 -> RAM, ... must not be changed */ + buck6_reg: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V8_SNVS */ + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V8_ANA */ + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* unused */ + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + /* VCC SD IO - switched using SD2 VSELECT */ + ldo5_reg: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + pcf85063: rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + }; + + at24c02: eeprom@53 { + compatible = "nxp,se97b", "atmel,24c02"; + read-only; + reg = <0x53>; + pagesize = <16>; + vcc-supply = <®_vcc3v3>; + }; + + m24c64: eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <32>; + vcc-supply = <®_vcc3v3>; + }; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc1v8>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_flexspi0: flexspi0grp { + fsl,pins = <MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x142>, + <MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82>, + <MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82>, + <MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82>, + <MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82>, + <MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82>; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001e2>, + <MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001e2>; + }; + + pinctrl_i2c1_gpio: i2c1-gpiogrp { + fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x400001e2>, + <MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x400001e2>; + }; + + pinctrl_pmic: pmicirqgrp { + fsl,pins = <MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x1c0>; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x10>; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>, + <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>, + <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>, + <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>, + <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>, + <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>, + <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x84>, + <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x84>; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>, + <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>, + <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>, + <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>, + <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>, + <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>, + <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x84>, + <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x84>; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>, + <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>, + <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>, + <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>, + <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>, + <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>, + <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x84>, + <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x84>; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = <MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x1c4>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi index fb17e329cd37..c5987bdbb383 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi @@ -49,7 +49,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - wakeup { + button-wakeup { debounce-interval = <10>; /* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */ gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; @@ -146,6 +146,14 @@ }; }; +&cpu_alert0 { + temperature = <95000>; +}; + +&cpu_crit0 { + temperature = <105000>; +}; + /* Verdin SPI_1 */ &ecspi1 { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 410d0d5e6f1e..fe178b7d063c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -195,7 +195,7 @@ clk_ext4: clock-ext4 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency= <133000000>; + clock-frequency = <133000000>; clock-output-names = "clk_ext4"; }; @@ -293,7 +293,7 @@ arm,no-tick-in-suspend; }; - soc@0 { + soc: soc@0 { compatible = "fsl,imx8mp-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -791,6 +791,7 @@ compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; sec_jr1: jr@2000 { @@ -903,7 +904,7 @@ <&clk IMX8MP_CLK_USDHC1_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; @@ -917,7 +918,7 @@ <&clk IMX8MP_CLK_USDHC2_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; @@ -931,7 +932,7 @@ <&clk IMX8MP_CLK_USDHC3_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; @@ -1018,6 +1019,26 @@ }; }; + noc: interconnect@32700000 { + compatible = "fsl,imx8mp-noc", "fsl,imx8m-noc"; + reg = <0x32700000 0x100000>; + clocks = <&clk IMX8MP_CLK_NOC>; + #interconnect-cells = <1>; + operating-points-v2 = <&noc_opp_table>; + + noc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200M { + opp-hz = /bits/ 64 <200000000>; + }; + + opp-1000M { + opp-hz = /bits/ 64 <1000000000>; + }; + }; + }; + aips4: bus@32c00000 { compatible = "fsl,aips-bus", "simple-bus"; reg = <0x32c00000 0x400000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 99fed35168eb..82387b9cb800 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -71,12 +71,36 @@ linux,autosuspend-period = <125>; }; + audio_codec_bt_sco: audio-codec-bt-sco { + compatible = "linux,bt-sco"; + #sound-dai-cells = <1>; + }; + wm8524: audio-codec { #sound-dai-cells = <0>; compatible = "wlf,wm8524"; wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; }; + sound-bt-sco { + compatible = "simple-audio-card"; + simple-audio-card,name = "bt-sco-audio"; + simple-audio-card,format = "dsp_a"; + simple-audio-card,bitclock-inversion; + simple-audio-card,frame-master = <&btcpu>; + simple-audio-card,bitclock-master = <&btcpu>; + + btcpu: simple-audio-card,cpu { + sound-dai = <&sai3>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + + simple-audio-card,codec { + sound-dai = <&audio_codec_bt_sco 1>; + }; + }; + sound-wm8524 { compatible = "simple-audio-card"; simple-audio-card,name = "wm8524-audio"; @@ -386,6 +410,16 @@ status = "okay"; }; +&sai3 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -548,6 +582,15 @@ >; }; + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + MX8MQ_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6 + >; + }; + pinctrl_spdif1: spdif1grp { fsl,pins = < MX8MQ_IOMUXC_SPDIF_TX_SPDIF1_OUT 0xd6 diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index b86f188a440d..6445c6b90b5b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -36,21 +36,21 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - btn1 { + button-1 { label = "VOL_UP"; gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; wakeup-source; linux,code = <KEY_VOLUMEUP>; }; - btn2 { + button-2 { label = "VOL_DOWN"; gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; wakeup-source; linux,code = <KEY_VOLUMEDOWN>; }; - wwan-wake { + button-3 { label = "WWAN_WAKE"; gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio3>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index 587e55aaa57b..9eec8a7eecfc 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -37,7 +37,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_keys>; - vol-down { + key-vol-down { label = "VOL_DOWN"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; @@ -45,7 +45,7 @@ wakeup-source; }; - vol-up { + key-vol-up { label = "VOL_UP"; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts index f70fb32b96b0..9dda2a1554c3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts @@ -26,7 +26,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + button-power { label = "Power Button"; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; @@ -152,7 +152,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_arm_dram>; reg = <0x60>; - regulator-min-microvolt = <900000>; + regulator-min-microvolt = <900000>; regulator-max-microvolt = <1000000>; regulator-always-on; vsel-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; @@ -186,7 +186,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_soc_gpu_vpu>; reg = <0x60>; - regulator-min-microvolt = <900000>; + regulator-min-microvolt = <900000>; regulator-max-microvolt = <1000000>; regulator-always-on; vsel-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi index 2222ef7b3eab..4e05120c62d4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi @@ -443,7 +443,7 @@ status = "okay"; usbhub: usbhub@2c { - compatible ="microchip,usb2513b"; + compatible = "microchip,usb2513b"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbhub>; reg = <0x2c>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 49eadb081b19..e9f0cdd10ab6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -94,7 +94,7 @@ clk_ext4: clock-ext4 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency= <133000000>; + clock-frequency = <133000000>; clock-output-names = "clk_ext4"; }; @@ -320,7 +320,7 @@ arm,no-tick-in-suspend; }; - soc@0 { + soc: soc@0 { compatible = "fsl,imx8mq-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -329,7 +329,7 @@ nvmem-cells = <&imx8mq_uid>; nvmem-cell-names = "soc_unique_id"; - bus@30000000 { /* AIPS1 */ + aips1: bus@30000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30000000 0x400000>; #address-cells = <1>; @@ -507,7 +507,7 @@ <0x00030005 0x00000053>, <0x00030006 0x0000005f>, <0x00030007 0x00000071>; - #thermal-sensor-cells = <1>; + #thermal-sensor-cells = <1>; }; wdog1: watchdog@30280000 { @@ -784,7 +784,7 @@ }; }; - bus@30400000 { /* AIPS2 */ + aips2: bus@30400000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30400000 0x400000>; #address-cells = <1>; @@ -844,7 +844,7 @@ }; }; - bus@30800000 { /* AIPS3 */ + aips3: bus@30800000 { /* AIPS3 */ compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30800000 0x400000>; #address-cells = <1>; @@ -1018,6 +1018,7 @@ compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; sec_jr1: jr@2000 { @@ -1369,7 +1370,7 @@ }; }; - bus@32c00000 { /* AIPS4 */ + aips4: bus@32c00000 { /* AIPS4 */ compatible = "fsl,aips-bus", "simple-bus"; reg = <0x32c00000 0x400000>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi index 4f767012f1f5..c9c2b6536233 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi @@ -181,7 +181,7 @@ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ }; - scu { + system-controller { compatible = "fsl,imx-scu"; mbox-names = "tx0", "rx0", @@ -190,7 +190,7 @@ &lsio_mu1 1 0 &lsio_mu1 3 3>; - pd: imx8qx-pd { + pd: power-controller { compatible = "fsl,imx8qm-scu-pd", "fsl,scu-pd"; #power-domain-cells = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi index 144fc9e82da7..a08e70fb7c7a 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi @@ -16,7 +16,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpiokeys>; - wakeup { + key-wakeup { label = "Wake-Up"; gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>; linux,code = <KEY_WAKEUP>; @@ -38,17 +38,17 @@ /* Colibri UART_B */ &lpuart0 { - status= "okay"; + status = "okay"; }; /* Colibri UART_C */ &lpuart2 { - status= "okay"; + status = "okay"; }; /* Colibri UART_A */ &lpuart3 { - status= "okay"; + status = "okay"; }; /* Colibri FastEthernet */ diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index a79ae33cbad2..f4ea18bb95ab 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -201,7 +201,7 @@ method = "smc"; }; - scu { + system-controller { compatible = "fsl,imx-scu"; mbox-names = "tx0", "rx0", @@ -210,29 +210,27 @@ &lsio_mu1 1 0 &lsio_mu1 3 3>; - pd: imx8qx-pd { + pd: power-controller { compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; #power-domain-cells = <1>; }; clk: clock-controller { - compatible = "fsl,imx8qxp-clk"; + compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; #clock-cells = <2>; - clocks = <&xtal32k &xtal24m>; - clock-names = "xtal_32KHz", "xtal_24Mhz"; }; iomuxc: pinctrl { compatible = "fsl,imx8qxp-iomuxc"; }; - ocotp: imx8qx-ocotp { + ocotp: ocotp { compatible = "fsl,imx8qxp-scu-ocotp"; #address-cells = <1>; #size-cells = <1>; }; - scu_key: scu-key { + scu_key: keys { compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; linux,keycodes = <KEY_POWER>; status = "disabled"; @@ -276,7 +274,7 @@ }; thermal_zones: thermal-zones { - cpu-thermal0 { + cpu0-thermal { polling-delay-passive = <250>; polling-delay = <2000>; thermal-sensors = <&tsens IMX_SC_R_SYSTEM>; diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi index 09f7364dd1d0..60c1b018bf03 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi @@ -137,7 +137,7 @@ }; }; - soc@0 { + soc: soc@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -331,7 +331,7 @@ clock-names = "ipg", "ahb", "per"; power-domains = <&scmi_devpd IMX8ULP_PD_USDHC0>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; @@ -346,7 +346,7 @@ clock-names = "ipg", "ahb", "per"; power-domains = <&scmi_devpd IMX8ULP_PD_USDHC1>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; @@ -361,13 +361,13 @@ clock-names = "ipg", "ahb", "per"; power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; }; - gpioe: gpio@2d000000 { + gpioe: gpio@2d000080 { compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; reg = <0x2d000080 0x1000>, <0x2d000040 0x40>; gpio-controller; @@ -381,7 +381,7 @@ gpio-ranges = <&iomuxc1 0 32 24>; }; - gpiof: gpio@2d010000 { + gpiof: gpio@2d010080 { compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; reg = <0x2d010080 0x1000>, <0x2d010040 0x40>; gpio-controller; @@ -417,7 +417,7 @@ }; }; - gpiod: gpio@2e200000 { + gpiod: gpio@2e200080 { compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; reg = <0x2e200080 0x1000>, <0x2e200040 0x40>; gpio-controller; diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts new file mode 100644 index 000000000000..69786c326db0 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 NXP + */ + +/dts-v1/; + +#include "imx93.dtsi" + +/ { + model = "NXP i.MX93 11X11 EVK board"; + compatible = "fsl,imx93-11x11-evk", "fsl,imx93"; + + chosen { + stdout-path = &lpuart1; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&mu1 { + status = "okay"; +}; + +&mu2 { + status = "okay"; +}; + +&lpuart1 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; + no-sdio; + no-mmc; +}; + +&iomuxc { + pinctrl_uart1: uart1grp { + fsl,pins = < + MX93_PAD_UART1_RXD__LPUART1_RX 0x31e + MX93_PAD_UART1_TXD__LPUART1_TX 0x31e + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x17fe + MX93_PAD_SD1_CMD__USDHC1_CMD 0x13fe + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x17fe + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x17fe + MX93_PAD_SD2_CMD__USDHC2_CMD 0x13fe + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-pinfunc.h b/arch/arm64/boot/dts/freescale/imx93-pinfunc.h new file mode 100755 index 000000000000..4298a145f8a9 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-pinfunc.h @@ -0,0 +1,623 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright 2022 NXP + */ + +#ifndef __DTS_IMX93_PINFUNC_H +#define __DTS_IMX93_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX93_PAD_DAP_TDI__JTAG_MUX_TDI 0x0000 0x01B0 0x03D8 0x0 0x0 +#define MX93_PAD_DAP_TDI__MQS2_LEFT 0x0000 0x01B0 0x0000 0x1 0x0 +#define MX93_PAD_DAP_TDI__CAN2_TX 0x0000 0x01B0 0x0000 0x3 0x0 +#define MX93_PAD_DAP_TDI__FLEXIO2_FLEXIO30 0x0000 0x01B0 0x0000 0x4 0x0 +#define MX93_PAD_DAP_TDI__GPIO3_IO28 0x0000 0x01B0 0x0000 0x5 0x0 +#define MX93_PAD_DAP_TDI__LPUART5_RX 0x0000 0x01B0 0x0430 0x6 0x0 +#define MX93_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS 0x0004 0x01B4 0x03DC 0x0 0x0 +#define MX93_PAD_DAP_TMS_SWDIO__FLEXIO2_FLEXIO31 0x0004 0x01B4 0x0000 0x4 0x0 +#define MX93_PAD_DAP_TMS_SWDIO__GPIO3_IO29 0x0004 0x01B4 0x0000 0x5 0x0 +#define MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x0004 0x01B4 0x0000 0x6 0x0 +#define MX93_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK 0x0008 0x01B8 0x03D4 0x0 0x0 +#define MX93_PAD_DAP_TCLK_SWCLK__FLEXIO1_FLEXIO30 0x0008 0x01B8 0x0000 0x4 0x0 +#define MX93_PAD_DAP_TCLK_SWCLK__GPIO3_IO30 0x0008 0x01B8 0x0000 0x5 0x0 +#define MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x0008 0x01B8 0x042C 0x6 0x0 +#define MX93_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO 0x000C 0x01BC 0x0000 0x0 0x0 +#define MX93_PAD_DAP_TDO_TRACESWO__MQS2_RIGHT 0x000C 0x01BC 0x0000 0x1 0x0 +#define MX93_PAD_DAP_TDO_TRACESWO__CAN2_RX 0x000C 0x01BC 0x0364 0x3 0x0 +#define MX93_PAD_DAP_TDO_TRACESWO__FLEXIO1_FLEXIO31 0x000C 0x01BC 0x0000 0x4 0x0 +#define MX93_PAD_DAP_TDO_TRACESWO__GPIO3_IO31 0x000C 0x01BC 0x0000 0x5 0x0 +#define MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x000C 0x01BC 0x0434 0x6 0x0 +#define MX93_PAD_GPIO_IO00__GPIO2_IO00 0x0010 0x01C0 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO00__LPI2C3_SDA 0x0010 0x01C0 0x03E4 0x11 0x0 +#define MX93_PAD_GPIO_IO00__MEDIAMIX_CAM_CLK 0x0010 0x01C0 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK 0x0010 0x01C0 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO00__LPSPI6_PCS0 0x0010 0x01C0 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO00__LPUART5_TX 0x0010 0x01C0 0x0434 0x5 0x1 +#define MX93_PAD_GPIO_IO00__LPI2C5_SDA 0x0010 0x01C0 0x03EC 0x16 0x0 +#define MX93_PAD_GPIO_IO00__FLEXIO1_FLEXIO00 0x0010 0x01C0 0x036C 0x7 0x0 +#define MX93_PAD_GPIO_IO01__GPIO2_IO01 0x0014 0x01C4 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO01__LPI2C3_SCL 0x0014 0x01C4 0x03E0 0x11 0x0 +#define MX93_PAD_GPIO_IO01__MEDIAMIX_CAM_DATA00 0x0014 0x01C4 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO01__MEDIAMIX_DISP_DE 0x0014 0x01C4 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO01__LPSPI6_SIN 0x0014 0x01C4 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO01__LPUART5_RX 0x0014 0x01C4 0x0430 0x5 0x1 +#define MX93_PAD_GPIO_IO01__LPI2C5_SCL 0x0014 0x01C4 0x03E8 0x16 0x0 +#define MX93_PAD_GPIO_IO01__FLEXIO1_FLEXIO01 0x0014 0x01C4 0x0370 0x7 0x0 +#define MX93_PAD_GPIO_IO02__GPIO2_IO02 0x0018 0x01C8 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO02__LPI2C4_SDA 0x0018 0x01C8 0x0000 0x11 0x0 +#define MX93_PAD_GPIO_IO02__MEDIAMIX_CAM_VSYNC 0x0018 0x01C8 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC 0x0018 0x01C8 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO02__LPSPI6_SOUT 0x0018 0x01C8 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO02__LPUART5_CTS_B 0x0018 0x01C8 0x042C 0x5 0x1 +#define MX93_PAD_GPIO_IO02__LPI2C6_SDA 0x0018 0x01C8 0x03F4 0x16 0x0 +#define MX93_PAD_GPIO_IO02__FLEXIO1_FLEXIO02 0x0018 0x01C8 0x0374 0x7 0x0 +#define MX93_PAD_GPIO_IO03__GPIO2_IO03 0x001C 0x01CC 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO03__LPI2C4_SCL 0x001C 0x01CC 0x0000 0x11 0x0 +#define MX93_PAD_GPIO_IO03__MEDIAMIX_CAM_HSYNC 0x001C 0x01CC 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC 0x001C 0x01CC 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO03__LPSPI6_SCK 0x001C 0x01CC 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO03__LPUART5_RTS_B 0x001C 0x01CC 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO03__LPI2C6_SCL 0x001C 0x01CC 0x03F0 0x16 0x0 +#define MX93_PAD_GPIO_IO03__FLEXIO1_FLEXIO03 0x001C 0x01CC 0x0378 0x7 0x0 +#define MX93_PAD_GPIO_IO04__GPIO2_IO04 0x0020 0x01D0 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO04__TPM3_CH0 0x0020 0x01D0 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO04__PDM_CLK 0x0020 0x01D0 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA00 0x0020 0x01D0 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO04__LPSPI7_PCS0 0x0020 0x01D0 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO04__LPUART6_TX 0x0020 0x01D0 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO04__LPI2C6_SDA 0x0020 0x01D0 0x03F4 0x16 0x1 +#define MX93_PAD_GPIO_IO04__FLEXIO1_FLEXIO04 0x0020 0x01D0 0x037C 0x7 0x0 +#define MX93_PAD_GPIO_IO05__GPIO2_IO05 0x0024 0x01D4 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO05__TPM4_CH0 0x0024 0x01D4 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO05__PDM_BIT_STREAM00 0x0024 0x01D4 0x0438 0x2 0x0 +#define MX93_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA01 0x0024 0x01D4 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO05__LPSPI7_SIN 0x0024 0x01D4 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO05__LPUART6_RX 0x0024 0x01D4 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO05__LPI2C6_SCL 0x0024 0x01D4 0x03F0 0x16 0x1 +#define MX93_PAD_GPIO_IO05__FLEXIO1_FLEXIO05 0x0024 0x01D4 0x0380 0x7 0x0 +#define MX93_PAD_GPIO_IO06__GPIO2_IO06 0x0028 0x01D8 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO06__TPM5_CH0 0x0028 0x01D8 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO06__PDM_BIT_STREAM01 0x0028 0x01D8 0x043C 0x2 0x0 +#define MX93_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA02 0x0028 0x01D8 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO06__LPSPI7_SOUT 0x0028 0x01D8 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO06__LPUART6_CTS_B 0x0028 0x01D8 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO06__LPI2C7_SDA 0x0028 0x01D8 0x03FC 0x16 0x0 +#define MX93_PAD_GPIO_IO06__FLEXIO1_FLEXIO06 0x0028 0x01D8 0x0384 0x7 0x0 +#define MX93_PAD_GPIO_IO07__GPIO2_IO07 0x002C 0x01DC 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO07__LPSPI3_PCS1 0x002C 0x01DC 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO07__MEDIAMIX_CAM_DATA01 0x002C 0x01DC 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA03 0x002C 0x01DC 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO07__LPSPI7_SCK 0x002C 0x01DC 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO07__LPUART6_RTS_B 0x002C 0x01DC 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO07__LPI2C7_SCL 0x002C 0x01DC 0x03F8 0x16 0x0 +#define MX93_PAD_GPIO_IO07__FLEXIO1_FLEXIO07 0x002C 0x01DC 0x0388 0x7 0x0 +#define MX93_PAD_GPIO_IO08__GPIO2_IO08 0x0030 0x01E0 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO08__LPSPI3_PCS0 0x0030 0x01E0 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO08__MEDIAMIX_CAM_DATA02 0x0030 0x01E0 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA04 0x0030 0x01E0 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO08__TPM6_CH0 0x0030 0x01E0 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO08__LPUART7_TX 0x0030 0x01E0 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO08__LPI2C7_SDA 0x0030 0x01E0 0x03FC 0x16 0x1 +#define MX93_PAD_GPIO_IO08__FLEXIO1_FLEXIO08 0x0030 0x01E0 0x038C 0x7 0x0 +#define MX93_PAD_GPIO_IO09__GPIO2_IO09 0x0034 0x01E4 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO09__LPSPI3_SIN 0x0034 0x01E4 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO09__MEDIAMIX_CAM_DATA03 0x0034 0x01E4 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA05 0x0034 0x01E4 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO09__TPM3_EXTCLK 0x0034 0x01E4 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO09__LPUART7_RX 0x0034 0x01E4 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO09__LPI2C7_SCL 0x0034 0x01E4 0x03F8 0x16 0x1 +#define MX93_PAD_GPIO_IO09__FLEXIO1_FLEXIO09 0x0034 0x01E4 0x0390 0x7 0x0 +#define MX93_PAD_GPIO_IO10__GPIO2_IO10 0x0038 0x01E8 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO10__LPSPI3_SOUT 0x0038 0x01E8 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO10__MEDIAMIX_CAM_DATA04 0x0038 0x01E8 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA06 0x0038 0x01E8 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO10__TPM4_EXTCLK 0x0038 0x01E8 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO10__LPUART7_CTS_B 0x0038 0x01E8 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO10__LPI2C8_SDA 0x0038 0x01E8 0x0404 0x16 0x0 +#define MX93_PAD_GPIO_IO10__FLEXIO1_FLEXIO10 0x0038 0x01E8 0x0394 0x7 0x0 +#define MX93_PAD_GPIO_IO11__GPIO2_IO11 0x003C 0x01EC 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO11__LPSPI3_SCK 0x003C 0x01EC 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO11__MEDIAMIX_CAM_DATA05 0x003C 0x01EC 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA07 0x003C 0x01EC 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO11__TPM5_EXTCLK 0x003C 0x01EC 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO11__LPUART7_RTS_B 0x003C 0x01EC 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO11__LPI2C8_SCL 0x003C 0x01EC 0x0400 0x16 0x0 +#define MX93_PAD_GPIO_IO11__FLEXIO1_FLEXIO11 0x003C 0x01EC 0x0398 0x7 0x0 +#define MX93_PAD_GPIO_IO12__GPIO2_IO12 0x0040 0x01F0 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO12__TPM3_CH2 0x0040 0x01F0 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO12__PDM_BIT_STREAM02 0x0040 0x01F0 0x0440 0x2 0x0 +#define MX93_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA08 0x0040 0x01F0 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO12__LPSPI8_PCS0 0x0040 0x01F0 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO12__LPUART8_TX 0x0040 0x01F0 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO12__LPI2C8_SDA 0x0040 0x01F0 0x0404 0x16 0x1 +#define MX93_PAD_GPIO_IO12__SAI3_RX_SYNC 0x0040 0x01F0 0x0450 0x7 0x0 +#define MX93_PAD_GPIO_IO13__GPIO2_IO13 0x0044 0x01F4 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO13__TPM4_CH2 0x0044 0x01F4 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO13__PDM_BIT_STREAM03 0x0044 0x01F4 0x0444 0x2 0x0 +#define MX93_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA09 0x0044 0x01F4 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO13__LPSPI8_SIN 0x0044 0x01F4 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO13__LPUART8_RX 0x0044 0x01F4 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO13__LPI2C8_SCL 0x0044 0x01F4 0x0400 0x16 0x1 +#define MX93_PAD_GPIO_IO13__FLEXIO1_FLEXIO13 0x0044 0x01F4 0x039C 0x7 0x0 +#define MX93_PAD_GPIO_IO14__GPIO2_IO14 0x0048 0x01F8 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO14__LPUART3_TX 0x0048 0x01F8 0x041C 0x1 0x0 +#define MX93_PAD_GPIO_IO14__MEDIAMIX_CAM_DATA06 0x0048 0x01F8 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10 0x0048 0x01F8 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO14__LPSPI8_SOUT 0x0048 0x01F8 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO14__LPUART8_CTS_B 0x0048 0x01F8 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO14__LPUART4_TX 0x0048 0x01F8 0x0428 0x6 0x0 +#define MX93_PAD_GPIO_IO14__FLEXIO1_FLEXIO14 0x0048 0x01F8 0x03A0 0x7 0x0 +#define MX93_PAD_GPIO_IO15__GPIO2_IO15 0x004C 0x01FC 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO15__LPUART3_RX 0x004C 0x01FC 0x0418 0x1 0x0 +#define MX93_PAD_GPIO_IO15__MEDIAMIX_CAM_DATA07 0x004C 0x01FC 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11 0x004C 0x01FC 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO15__LPSPI8_SCK 0x004C 0x01FC 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO15__LPUART8_RTS_B 0x004C 0x01FC 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO15__LPUART4_RX 0x004C 0x01FC 0x0424 0x6 0x0 +#define MX93_PAD_GPIO_IO15__FLEXIO1_FLEXIO15 0x004C 0x01FC 0x03A4 0x7 0x0 +#define MX93_PAD_GPIO_IO16__GPIO2_IO16 0x0050 0x0200 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO16__SAI3_TX_BCLK 0x0050 0x0200 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO16__PDM_BIT_STREAM02 0x0050 0x0200 0x0440 0x2 0x1 +#define MX93_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12 0x0050 0x0200 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO16__LPUART3_CTS_B 0x0050 0x0200 0x0414 0x4 0x0 +#define MX93_PAD_GPIO_IO16__LPSPI4_PCS2 0x0050 0x0200 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO16__LPUART4_CTS_B 0x0050 0x0200 0x0420 0x6 0x0 +#define MX93_PAD_GPIO_IO16__FLEXIO1_FLEXIO16 0x0050 0x0200 0x03A8 0x7 0x0 +#define MX93_PAD_GPIO_IO17__GPIO2_IO17 0x0054 0x0204 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO17__SAI3_MCLK 0x0054 0x0204 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO17__MEDIAMIX_CAM_DATA08 0x0054 0x0204 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13 0x0054 0x0204 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO17__LPUART3_RTS_B 0x0054 0x0204 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO17__LPSPI4_PCS1 0x0054 0x0204 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO17__LPUART4_RTS_B 0x0054 0x0204 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO17__FLEXIO1_FLEXIO17 0x0054 0x0204 0x03AC 0x7 0x0 +#define MX93_PAD_GPIO_IO18__GPIO2_IO18 0x0058 0x0208 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO18__SAI3_RX_BCLK 0x0058 0x0208 0x044C 0x1 0x0 +#define MX93_PAD_GPIO_IO18__MEDIAMIX_CAM_DATA09 0x0058 0x0208 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14 0x0058 0x0208 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO18__LPSPI5_PCS0 0x0058 0x0208 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO18__LPSPI4_PCS0 0x0058 0x0208 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO18__TPM5_CH2 0x0058 0x0208 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO18__FLEXIO1_FLEXIO18 0x0058 0x0208 0x03B0 0x7 0x0 +#define MX93_PAD_GPIO_IO19__GPIO2_IO19 0x005C 0x020C 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO19__SAI3_RX_SYNC 0x005C 0x020C 0x0450 0x1 0x1 +#define MX93_PAD_GPIO_IO19__PDM_BIT_STREAM03 0x005C 0x020C 0x0444 0x2 0x1 +#define MX93_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15 0x005C 0x020C 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO19__LPSPI5_SIN 0x005C 0x020C 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO19__LPSPI4_SIN 0x005C 0x020C 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO19__TPM6_CH2 0x005C 0x020C 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO19__SAI3_TX_DATA00 0x005C 0x020C 0x0000 0x7 0x0 +#define MX93_PAD_GPIO_IO20__GPIO2_IO20 0x0060 0x0210 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO20__SAI3_RX_DATA00 0x0060 0x0210 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO20__PDM_BIT_STREAM00 0x0060 0x0210 0x0438 0x2 0x1 +#define MX93_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16 0x0060 0x0210 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO20__LPSPI5_SOUT 0x0060 0x0210 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO20__LPSPI4_SOUT 0x0060 0x0210 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO20__TPM3_CH1 0x0060 0x0210 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO20__FLEXIO1_FLEXIO20 0x0060 0x0210 0x03B4 0x7 0x0 +#define MX93_PAD_GPIO_IO21__GPIO2_IO21 0x0064 0x0214 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO21__SAI3_TX_DATA00 0x0064 0x0214 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO21__PDM_CLK 0x0064 0x0214 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17 0x0064 0x0214 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO21__LPSPI5_SCK 0x0064 0x0214 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO21__LPSPI4_SCK 0x0064 0x0214 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO21__TPM4_CH1 0x0064 0x0214 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO21__SAI3_RX_BCLK 0x0064 0x0214 0x044C 0x7 0x1 +#define MX93_PAD_GPIO_IO22__GPIO2_IO22 0x0068 0x0218 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO22__USDHC3_CLK 0x0068 0x0218 0x0458 0x1 0x0 +#define MX93_PAD_GPIO_IO22__SPDIF_IN 0x0068 0x0218 0x0454 0x2 0x0 +#define MX93_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18 0x0068 0x0218 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO22__TPM5_CH1 0x0068 0x0218 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO22__TPM6_EXTCLK 0x0068 0x0218 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x0068 0x0218 0x03EC 0x16 0x1 +#define MX93_PAD_GPIO_IO22__FLEXIO1_FLEXIO22 0x0068 0x0218 0x03B8 0x7 0x0 +#define MX93_PAD_GPIO_IO23__GPIO2_IO23 0x006C 0x021C 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO23__USDHC3_CMD 0x006C 0x021C 0x045C 0x1 0x0 +#define MX93_PAD_GPIO_IO23__SPDIF_OUT 0x006C 0x021C 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19 0x006C 0x021C 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO23__TPM6_CH1 0x006C 0x021C 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x006C 0x021C 0x03E8 0x16 0x1 +#define MX93_PAD_GPIO_IO23__FLEXIO1_FLEXIO23 0x006C 0x021C 0x03BC 0x7 0x0 +#define MX93_PAD_GPIO_IO24__GPIO2_IO24 0x0070 0x0220 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO24__USDHC3_DATA0 0x0070 0x0220 0x0460 0x1 0x0 +#define MX93_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20 0x0070 0x0220 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO24__TPM3_CH3 0x0070 0x0220 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO24__JTAG_MUX_TDO 0x0070 0x0220 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO24__LPSPI6_PCS1 0x0070 0x0220 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO24__FLEXIO1_FLEXIO24 0x0070 0x0220 0x03C0 0x7 0x0 +#define MX93_PAD_GPIO_IO25__GPIO2_IO25 0x0074 0x0224 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO25__USDHC3_DATA1 0x0074 0x0224 0x0464 0x1 0x0 +#define MX93_PAD_GPIO_IO25__CAN2_TX 0x0074 0x0224 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21 0x0074 0x0224 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO25__TPM4_CH3 0x0074 0x0224 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO25__JTAG_MUX_TCK 0x0074 0x0224 0x03D4 0x5 0x1 +#define MX93_PAD_GPIO_IO25__LPSPI7_PCS1 0x0074 0x0224 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO25__FLEXIO1_FLEXIO25 0x0074 0x0224 0x03C4 0x7 0x0 +#define MX93_PAD_GPIO_IO26__GPIO2_IO26 0x0078 0x0228 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO26__USDHC3_DATA2 0x0078 0x0228 0x0468 0x1 0x0 +#define MX93_PAD_GPIO_IO26__PDM_BIT_STREAM01 0x0078 0x0228 0x043C 0x2 0x1 +#define MX93_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22 0x0078 0x0228 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO26__TPM5_CH3 0x0078 0x0228 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO26__JTAG_MUX_TDI 0x0078 0x0228 0x03D8 0x5 0x1 +#define MX93_PAD_GPIO_IO26__LPSPI8_PCS1 0x0078 0x0228 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO26__SAI3_TX_SYNC 0x0078 0x0228 0x0000 0x7 0x0 +#define MX93_PAD_GPIO_IO27__GPIO2_IO27 0x007C 0x022C 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO27__USDHC3_DATA3 0x007C 0x022C 0x046C 0x1 0x0 +#define MX93_PAD_GPIO_IO27__CAN2_RX 0x007C 0x022C 0x0364 0x2 0x1 +#define MX93_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23 0x007C 0x022C 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO27__TPM6_CH3 0x007C 0x022C 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO27__JTAG_MUX_TMS 0x007C 0x022C 0x03DC 0x5 0x1 +#define MX93_PAD_GPIO_IO27__LPSPI5_PCS1 0x007C 0x022C 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO27__FLEXIO1_FLEXIO27 0x007C 0x022C 0x03C8 0x7 0x0 +#define MX93_PAD_GPIO_IO28__GPIO2_IO28 0x0080 0x0230 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x0080 0x0230 0x03E4 0x11 0x1 +#define MX93_PAD_GPIO_IO28__FLEXIO1_FLEXIO28 0x0080 0x0230 0x0000 0x7 0x0 +#define MX93_PAD_GPIO_IO29__GPIO2_IO29 0x0084 0x0234 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x0084 0x0234 0x03E0 0x11 0x1 +#define MX93_PAD_GPIO_IO29__FLEXIO1_FLEXIO29 0x0084 0x0234 0x0000 0x7 0x0 +#define MX93_PAD_CCM_CLKO1__CCMSRCGPCMIX_CLKO1 0x0088 0x0238 0x0000 0x0 0x0 +#define MX93_PAD_CCM_CLKO1__FLEXIO1_FLEXIO26 0x0088 0x0238 0x0000 0x4 0x0 +#define MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x0088 0x0238 0x0000 0x5 0x0 +#define MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x008C 0x023C 0x0000 0x5 0x0 +#define MX93_PAD_CCM_CLKO2__CCMSRCGPCMIX_CLKO2 0x008C 0x023C 0x0000 0x0 0x0 +#define MX93_PAD_CCM_CLKO2__FLEXIO1_FLEXIO27 0x008C 0x023C 0x03C8 0x4 0x1 +#define MX93_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3 0x0090 0x0240 0x0000 0x0 0x0 +#define MX93_PAD_CCM_CLKO3__FLEXIO2_FLEXIO28 0x0090 0x0240 0x0000 0x4 0x0 +#define MX93_PAD_CCM_CLKO3__GPIO4_IO28 0x0090 0x0240 0x0000 0x5 0x0 +#define MX93_PAD_CCM_CLKO4__CCMSRCGPCMIX_CLKO4 0x0094 0x0244 0x0000 0x0 0x0 +#define MX93_PAD_CCM_CLKO4__FLEXIO2_FLEXIO29 0x0094 0x0244 0x0000 0x4 0x0 +#define MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x0094 0x0244 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x0098 0x0248 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_MDC__LPUART3_DCB_B 0x0098 0x0248 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_MDC__I3C2_SCL 0x0098 0x0248 0x03CC 0x2 0x0 +#define MX93_PAD_ENET1_MDC__HSIOMIX_OTG_ID1 0x0098 0x0248 0x0000 0x3 0x0 +#define MX93_PAD_ENET1_MDC__FLEXIO2_FLEXIO00 0x0098 0x0248 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_MDC__GPIO4_IO00 0x0098 0x0248 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x009C 0x024C 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_MDIO__LPUART3_RIN_B 0x009C 0x024C 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_MDIO__I3C2_SDA 0x009C 0x024C 0x03D0 0x2 0x0 +#define MX93_PAD_ENET1_MDIO__HSIOMIX_OTG_PWR1 0x009C 0x024C 0x0000 0x3 0x0 +#define MX93_PAD_ENET1_MDIO__FLEXIO2_FLEXIO01 0x009C 0x024C 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_MDIO__GPIO4_IO01 0x009C 0x024C 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x00A0 0x0250 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_TD3__CAN2_TX 0x00A0 0x0250 0x0000 0x2 0x0 +#define MX93_PAD_ENET1_TD3__HSIOMIX_OTG_ID2 0x00A0 0x0250 0x0000 0x3 0x0 +#define MX93_PAD_ENET1_TD3__FLEXIO2_FLEXIO02 0x00A0 0x0250 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_TD3__GPIO4_IO02 0x00A0 0x0250 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x00A4 0x0254 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK 0x00A4 0x0254 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_TD2__CAN2_RX 0x00A4 0x0254 0x0364 0x2 0x2 +#define MX93_PAD_ENET1_TD2__HSIOMIX_OTG_OC2 0x00A4 0x0254 0x0000 0x3 0x0 +#define MX93_PAD_ENET1_TD2__FLEXIO2_FLEXIO03 0x00A4 0x0254 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_TD2__GPIO4_IO03 0x00A4 0x0254 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x00A8 0x0258 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_TD1__LPUART3_RTS_B 0x00A8 0x0258 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_TD1__I3C2_PUR 0x00A8 0x0258 0x0000 0x2 0x0 +#define MX93_PAD_ENET1_TD1__HSIOMIX_OTG_OC1 0x00A8 0x0258 0x0000 0x3 0x0 +#define MX93_PAD_ENET1_TD1__FLEXIO2_FLEXIO04 0x00A8 0x0258 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_TD1__GPIO4_IO04 0x00A8 0x0258 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_TD1__I3C2_PUR_B 0x00A8 0x0258 0x0000 0x6 0x0 +#define MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x00AC 0x025C 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_TD0__LPUART3_TX 0x00AC 0x025C 0x041C 0x1 0x1 +#define MX93_PAD_ENET1_TD0__FLEXIO2_FLEXIO05 0x00AC 0x025C 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_TD0__GPIO4_IO05 0x00AC 0x025C 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x00B0 0x0260 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_TX_CTL__LPUART3_DTR_B 0x00B0 0x0260 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_TX_CTL__FLEXIO2_FLEXIO06 0x00B0 0x0260 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_TX_CTL__GPIO4_IO06 0x00B0 0x0260 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x00B4 0x0264 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_TXC__ENET_QOS_TX_ER 0x00B4 0x0264 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_TXC__FLEXIO2_FLEXIO07 0x00B4 0x0264 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_TXC__GPIO4_IO07 0x00B4 0x0264 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x00B8 0x0268 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_RX_CTL__LPUART3_DSR_B 0x00B8 0x0268 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_RX_CTL__HSIOMIX_OTG_PWR2 0x00B8 0x0268 0x0000 0x3 0x0 +#define MX93_PAD_ENET1_RX_CTL__FLEXIO2_FLEXIO08 0x00B8 0x0268 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_RX_CTL__GPIO4_IO08 0x00B8 0x0268 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x00BC 0x026C 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_RXC__ENET_QOS_RX_ER 0x00BC 0x026C 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_RXC__FLEXIO2_FLEXIO09 0x00BC 0x026C 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_RXC__GPIO4_IO09 0x00BC 0x026C 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x00C0 0x0270 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_RD0__LPUART3_RX 0x00C0 0x0270 0x0418 0x1 0x1 +#define MX93_PAD_ENET1_RD0__FLEXIO2_FLEXIO10 0x00C0 0x0270 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_RD0__GPIO4_IO10 0x00C0 0x0270 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x00C4 0x0274 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_RD1__LPUART3_CTS_B 0x00C4 0x0274 0x0414 0x1 0x1 +#define MX93_PAD_ENET1_RD1__LPTMR2_ALT1 0x00C4 0x0274 0x0408 0x3 0x0 +#define MX93_PAD_ENET1_RD1__FLEXIO2_FLEXIO11 0x00C4 0x0274 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_RD1__GPIO4_IO11 0x00C4 0x0274 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x00C8 0x0278 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_RD2__LPTMR2_ALT2 0x00C8 0x0278 0x040C 0x3 0x0 +#define MX93_PAD_ENET1_RD2__FLEXIO2_FLEXIO12 0x00C8 0x0278 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_RD2__GPIO4_IO12 0x00C8 0x0278 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x00CC 0x027C 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_RD3__FLEXSPI1_TESTER_TRIGGER 0x00CC 0x027C 0x0000 0x2 0x0 +#define MX93_PAD_ENET1_RD3__LPTMR2_ALT3 0x00CC 0x027C 0x0410 0x3 0x0 +#define MX93_PAD_ENET1_RD3__FLEXIO2_FLEXIO13 0x00CC 0x027C 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_RD3__GPIO4_IO13 0x00CC 0x027C 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_MDC__ENET1_MDC 0x00D0 0x0280 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_MDC__LPUART4_DCB_B 0x00D0 0x0280 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_MDC__SAI2_RX_SYNC 0x00D0 0x0280 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_MDC__FLEXIO2_FLEXIO14 0x00D0 0x0280 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_MDC__GPIO4_IO14 0x00D0 0x0280 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x00D4 0x0284 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_MDIO__LPUART4_RIN_B 0x00D4 0x0284 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_MDIO__SAI2_RX_BCLK 0x00D4 0x0284 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_MDIO__FLEXIO2_FLEXIO15 0x00D4 0x0284 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_MDIO__GPIO4_IO15 0x00D4 0x0284 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_TD3__SAI2_RX_DATA00 0x00D8 0x0288 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_TD3__FLEXIO2_FLEXIO16 0x00D8 0x0288 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_TD3__GPIO4_IO16 0x00D8 0x0288 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x00D8 0x0288 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x00DC 0x028C 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_TD2__ENET1_TX_CLK 0x00DC 0x028C 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_TD2__SAI2_RX_DATA01 0x00DC 0x028C 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_TD2__FLEXIO2_FLEXIO17 0x00DC 0x028C 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_TD2__GPIO4_IO17 0x00DC 0x028C 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x00E0 0x0290 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_TD1__LPUART4_RTS_B 0x00E0 0x0290 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_TD1__SAI2_RX_DATA02 0x00E0 0x0290 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_TD1__FLEXIO2_FLEXIO18 0x00E0 0x0290 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_TD1__GPIO4_IO18 0x00E0 0x0290 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x00E4 0x0294 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_TD0__LPUART4_TX 0x00E4 0x0294 0x0428 0x1 0x1 +#define MX93_PAD_ENET2_TD0__SAI2_RX_DATA03 0x00E4 0x0294 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_TD0__FLEXIO2_FLEXIO19 0x00E4 0x0294 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_TD0__GPIO4_IO19 0x00E4 0x0294 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x00E8 0x0298 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_TX_CTL__LPUART4_DTR_B 0x00E8 0x0298 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_TX_CTL__SAI2_TX_SYNC 0x00E8 0x0298 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_TX_CTL__FLEXIO2_FLEXIO20 0x00E8 0x0298 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_TX_CTL__GPIO4_IO20 0x00E8 0x0298 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x00EC 0x029C 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_TXC__ENET1_TX_ER 0x00EC 0x029C 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_TXC__SAI2_TX_BCLK 0x00EC 0x029C 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_TXC__FLEXIO2_FLEXIO21 0x00EC 0x029C 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_TXC__GPIO4_IO21 0x00EC 0x029C 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x00F0 0x02A0 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_RX_CTL__LPUART4_DSR_B 0x00F0 0x02A0 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_RX_CTL__SAI2_TX_DATA00 0x00F0 0x02A0 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_RX_CTL__FLEXIO2_FLEXIO22 0x00F0 0x02A0 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_RX_CTL__GPIO4_IO22 0x00F0 0x02A0 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x00F4 0x02A4 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_RXC__ENET1_RX_ER 0x00F4 0x02A4 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_RXC__SAI2_TX_DATA01 0x00F4 0x02A4 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_RXC__FLEXIO2_FLEXIO23 0x00F4 0x02A4 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_RXC__GPIO4_IO23 0x00F4 0x02A4 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x00F8 0x02A8 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_RD0__LPUART4_RX 0x00F8 0x02A8 0x0424 0x1 0x1 +#define MX93_PAD_ENET2_RD0__SAI2_TX_DATA02 0x00F8 0x02A8 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_RD0__FLEXIO2_FLEXIO24 0x00F8 0x02A8 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_RD0__GPIO4_IO24 0x00F8 0x02A8 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x00FC 0x02AC 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_RD1__SPDIF_IN 0x00FC 0x02AC 0x0454 0x1 0x1 +#define MX93_PAD_ENET2_RD1__SAI2_TX_DATA03 0x00FC 0x02AC 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_RD1__FLEXIO2_FLEXIO25 0x00FC 0x02AC 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_RD1__GPIO4_IO25 0x00FC 0x02AC 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x0100 0x02B0 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_RD2__LPUART4_CTS_B 0x0100 0x02B0 0x0420 0x1 0x1 +#define MX93_PAD_ENET2_RD2__SAI2_MCLK 0x0100 0x02B0 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_RD2__MQS2_RIGHT 0x0100 0x02B0 0x0000 0x3 0x0 +#define MX93_PAD_ENET2_RD2__FLEXIO2_FLEXIO26 0x0100 0x02B0 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_RD2__GPIO4_IO26 0x0100 0x02B0 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x0104 0x02B4 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_RD3__SPDIF_OUT 0x0104 0x02B4 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_RD3__SPDIF_IN 0x0104 0x02B4 0x0454 0x2 0x2 +#define MX93_PAD_ENET2_RD3__MQS2_LEFT 0x0104 0x02B4 0x0000 0x3 0x0 +#define MX93_PAD_ENET2_RD3__FLEXIO2_FLEXIO27 0x0104 0x02B4 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_RD3__GPIO4_IO27 0x0104 0x02B4 0x0000 0x5 0x0 +#define MX93_PAD_SD1_CLK__FLEXIO1_FLEXIO08 0x0108 0x02B8 0x038C 0x4 0x1 +#define MX93_PAD_SD1_CLK__GPIO3_IO08 0x0108 0x02B8 0x0000 0x5 0x0 +#define MX93_PAD_SD1_CLK__USDHC1_CLK 0x0108 0x02B8 0x0000 0x0 0x0 +#define MX93_PAD_SD1_CMD__USDHC1_CMD 0x010C 0x02BC 0x0000 0x0 0x0 +#define MX93_PAD_SD1_CMD__FLEXIO1_FLEXIO09 0x010C 0x02BC 0x0390 0x4 0x1 +#define MX93_PAD_SD1_CMD__GPIO3_IO09 0x010C 0x02BC 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x0110 0x02C0 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA0__FLEXIO1_FLEXIO10 0x0110 0x02C0 0x0394 0x4 0x1 +#define MX93_PAD_SD1_DATA0__GPIO3_IO10 0x0110 0x02C0 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x0114 0x02C4 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA1__FLEXIO1_FLEXIO11 0x0114 0x02C4 0x0398 0x4 0x1 +#define MX93_PAD_SD1_DATA1__GPIO3_IO11 0x0114 0x02C4 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA1__CCMSRCGPCMIX_INT_BOOT 0x0114 0x02C4 0x0000 0x6 0x0 +#define MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x0118 0x02C8 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA2__FLEXIO1_FLEXIO12 0x0118 0x02C8 0x0000 0x4 0x0 +#define MX93_PAD_SD1_DATA2__GPIO3_IO12 0x0118 0x02C8 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA2__CCMSRCGPCMIX_PMIC_READY 0x0118 0x02C8 0x0000 0x6 0x0 +#define MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x011C 0x02CC 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA3__FLEXSPI1_A_SS1_B 0x011C 0x02CC 0x0000 0x1 0x0 +#define MX93_PAD_SD1_DATA3__FLEXIO1_FLEXIO13 0x011C 0x02CC 0x039C 0x4 0x1 +#define MX93_PAD_SD1_DATA3__GPIO3_IO13 0x011C 0x02CC 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x0120 0x02D0 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA4__FLEXSPI1_A_DATA04 0x0120 0x02D0 0x0000 0x1 0x0 +#define MX93_PAD_SD1_DATA4__FLEXIO1_FLEXIO14 0x0120 0x02D0 0x03A0 0x4 0x1 +#define MX93_PAD_SD1_DATA4__GPIO3_IO14 0x0120 0x02D0 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x0124 0x02D4 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA5__FLEXSPI1_A_DATA05 0x0124 0x02D4 0x0000 0x1 0x0 +#define MX93_PAD_SD1_DATA5__USDHC1_RESET_B 0x0124 0x02D4 0x0000 0x2 0x0 +#define MX93_PAD_SD1_DATA5__FLEXIO1_FLEXIO15 0x0124 0x02D4 0x03A4 0x4 0x1 +#define MX93_PAD_SD1_DATA5__GPIO3_IO15 0x0124 0x02D4 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x0128 0x02D8 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA6__FLEXSPI1_A_DATA06 0x0128 0x02D8 0x0000 0x1 0x0 +#define MX93_PAD_SD1_DATA6__USDHC1_CD_B 0x0128 0x02D8 0x0000 0x2 0x0 +#define MX93_PAD_SD1_DATA6__FLEXIO1_FLEXIO16 0x0128 0x02D8 0x03A8 0x4 0x1 +#define MX93_PAD_SD1_DATA6__GPIO3_IO16 0x0128 0x02D8 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x012C 0x02DC 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA7__FLEXSPI1_A_DATA07 0x012C 0x02DC 0x0000 0x1 0x0 +#define MX93_PAD_SD1_DATA7__USDHC1_WP 0x012C 0x02DC 0x0000 0x2 0x0 +#define MX93_PAD_SD1_DATA7__FLEXIO1_FLEXIO17 0x012C 0x02DC 0x03AC 0x4 0x1 +#define MX93_PAD_SD1_DATA7__GPIO3_IO17 0x012C 0x02DC 0x0000 0x5 0x0 +#define MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x0130 0x02E0 0x0000 0x0 0x0 +#define MX93_PAD_SD1_STROBE__FLEXSPI1_A_DQS 0x0130 0x02E0 0x0000 0x1 0x0 +#define MX93_PAD_SD1_STROBE__FLEXIO1_FLEXIO18 0x0130 0x02E0 0x03B0 0x4 0x1 +#define MX93_PAD_SD1_STROBE__GPIO3_IO18 0x0130 0x02E0 0x0000 0x5 0x0 +#define MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x0134 0x02E4 0x0000 0x0 0x0 +#define MX93_PAD_SD2_VSELECT__USDHC2_WP 0x0134 0x02E4 0x0000 0x1 0x0 +#define MX93_PAD_SD2_VSELECT__LPTMR2_ALT3 0x0134 0x02E4 0x0410 0x2 0x1 +#define MX93_PAD_SD2_VSELECT__FLEXIO1_FLEXIO19 0x0134 0x02E4 0x0000 0x4 0x0 +#define MX93_PAD_SD2_VSELECT__GPIO3_IO19 0x0134 0x02E4 0x0000 0x5 0x0 +#define MX93_PAD_SD2_VSELECT__CCMSRCGPCMIX_EXT_CLK1 0x0134 0x02E4 0x0368 0x6 0x0 +#define MX93_PAD_SD3_CLK__USDHC3_CLK 0x0138 0x02E8 0x0458 0x0 0x1 +#define MX93_PAD_SD3_CLK__FLEXSPI1_A_SCLK 0x0138 0x02E8 0x0000 0x1 0x0 +#define MX93_PAD_SD3_CLK__FLEXIO1_FLEXIO20 0x0138 0x02E8 0x03B4 0x4 0x1 +#define MX93_PAD_SD3_CLK__GPIO3_IO20 0x0138 0x02E8 0x0000 0x5 0x0 +#define MX93_PAD_SD3_CMD__USDHC3_CMD 0x013C 0x02EC 0x045C 0x0 0x1 +#define MX93_PAD_SD3_CMD__FLEXSPI1_A_SS0_B 0x013C 0x02EC 0x0000 0x1 0x0 +#define MX93_PAD_SD3_CMD__FLEXIO1_FLEXIO21 0x013C 0x02EC 0x0000 0x4 0x0 +#define MX93_PAD_SD3_CMD__GPIO3_IO21 0x013C 0x02EC 0x0000 0x5 0x0 +#define MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x0140 0x02F0 0x0460 0x0 0x1 +#define MX93_PAD_SD3_DATA0__FLEXSPI1_A_DATA00 0x0140 0x02F0 0x0000 0x1 0x0 +#define MX93_PAD_SD3_DATA0__FLEXIO1_FLEXIO22 0x0140 0x02F0 0x03B8 0x4 0x1 +#define MX93_PAD_SD3_DATA0__GPIO3_IO22 0x0140 0x02F0 0x0000 0x5 0x0 +#define MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x0144 0x02F4 0x0464 0x0 0x1 +#define MX93_PAD_SD3_DATA1__FLEXSPI1_A_DATA01 0x0144 0x02F4 0x0000 0x1 0x0 +#define MX93_PAD_SD3_DATA1__FLEXIO1_FLEXIO23 0x0144 0x02F4 0x03BC 0x4 0x1 +#define MX93_PAD_SD3_DATA1__GPIO3_IO23 0x0144 0x02F4 0x0000 0x5 0x0 +#define MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x0148 0x02F8 0x0468 0x0 0x1 +#define MX93_PAD_SD3_DATA2__FLEXSPI1_A_DATA02 0x0148 0x02F8 0x0000 0x1 0x0 +#define MX93_PAD_SD3_DATA2__FLEXIO1_FLEXIO24 0x0148 0x02F8 0x03C0 0x4 0x1 +#define MX93_PAD_SD3_DATA2__GPIO3_IO24 0x0148 0x02F8 0x0000 0x5 0x0 +#define MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x014C 0x02FC 0x046C 0x0 0x1 +#define MX93_PAD_SD3_DATA3__FLEXSPI1_A_DATA03 0x014C 0x02FC 0x0000 0x1 0x0 +#define MX93_PAD_SD3_DATA3__FLEXIO1_FLEXIO25 0x014C 0x02FC 0x03C4 0x4 0x1 +#define MX93_PAD_SD3_DATA3__GPIO3_IO25 0x014C 0x02FC 0x0000 0x5 0x0 +#define MX93_PAD_SD2_CD_B__USDHC2_CD_B 0x0150 0x0300 0x0000 0x0 0x0 +#define MX93_PAD_SD2_CD_B__ENET_QOS_1588_EVENT0_IN 0x0150 0x0300 0x0000 0x1 0x0 +#define MX93_PAD_SD2_CD_B__I3C2_SCL 0x0150 0x0300 0x03CC 0x2 0x1 +#define MX93_PAD_SD2_CD_B__FLEXIO1_FLEXIO00 0x0150 0x0300 0x036C 0x4 0x1 +#define MX93_PAD_SD2_CD_B__GPIO3_IO00 0x0150 0x0300 0x0000 0x5 0x0 +#define MX93_PAD_SD2_CLK__USDHC2_CLK 0x0154 0x0304 0x0000 0x0 0x0 +#define MX93_PAD_SD2_CLK__ENET_QOS_1588_EVENT0_OUT 0x0154 0x0304 0x0000 0x1 0x0 +#define MX93_PAD_SD2_CLK__I3C2_SDA 0x0154 0x0304 0x03D0 0x2 0x1 +#define MX93_PAD_SD2_CLK__FLEXIO1_FLEXIO01 0x0154 0x0304 0x0370 0x4 0x1 +#define MX93_PAD_SD2_CLK__GPIO3_IO01 0x0154 0x0304 0x0000 0x5 0x0 +#define MX93_PAD_SD2_CLK__CCMSRCGPCMIX_OBSERVE0 0x0154 0x0304 0x0000 0x6 0x0 +#define MX93_PAD_SD2_CMD__USDHC2_CMD 0x0158 0x0308 0x0000 0x0 0x0 +#define MX93_PAD_SD2_CMD__ENET1_1588_EVENT0_IN 0x0158 0x0308 0x0000 0x1 0x0 +#define MX93_PAD_SD2_CMD__I3C2_PUR 0x0158 0x0308 0x0000 0x2 0x0 +#define MX93_PAD_SD2_CMD__I3C2_PUR_B 0x0158 0x0308 0x0000 0x3 0x0 +#define MX93_PAD_SD2_CMD__FLEXIO1_FLEXIO02 0x0158 0x0308 0x0374 0x4 0x1 +#define MX93_PAD_SD2_CMD__GPIO3_IO02 0x0158 0x0308 0x0000 0x5 0x0 +#define MX93_PAD_SD2_CMD__CCMSRCGPCMIX_OBSERVE1 0x0158 0x0308 0x0000 0x6 0x0 +#define MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x015C 0x030C 0x0000 0x0 0x0 +#define MX93_PAD_SD2_DATA0__ENET1_1588_EVENT0_OUT 0x015C 0x030C 0x0000 0x1 0x0 +#define MX93_PAD_SD2_DATA0__CAN2_TX 0x015C 0x030C 0x0000 0x2 0x0 +#define MX93_PAD_SD2_DATA0__FLEXIO1_FLEXIO03 0x015C 0x030C 0x0378 0x4 0x1 +#define MX93_PAD_SD2_DATA0__GPIO3_IO03 0x015C 0x030C 0x0000 0x5 0x0 +#define MX93_PAD_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2 0x015C 0x030C 0x0000 0x6 0x0 +#define MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x0160 0x0310 0x0000 0x0 0x0 +#define MX93_PAD_SD2_DATA1__ENET1_1588_EVENT1_IN 0x0160 0x0310 0x0000 0x1 0x0 +#define MX93_PAD_SD2_DATA1__CAN2_RX 0x0160 0x0310 0x0364 0x2 0x3 +#define MX93_PAD_SD2_DATA1__FLEXIO1_FLEXIO04 0x0160 0x0310 0x037C 0x4 0x1 +#define MX93_PAD_SD2_DATA1__GPIO3_IO04 0x0160 0x0310 0x0000 0x5 0x0 +#define MX93_PAD_SD2_DATA1__CCMSRCGPCMIX_WAIT 0x0160 0x0310 0x0000 0x6 0x0 +#define MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x0164 0x0314 0x0000 0x0 0x0 +#define MX93_PAD_SD2_DATA2__ENET1_1588_EVENT1_OUT 0x0164 0x0314 0x0000 0x1 0x0 +#define MX93_PAD_SD2_DATA2__MQS2_RIGHT 0x0164 0x0314 0x0000 0x2 0x0 +#define MX93_PAD_SD2_DATA2__FLEXIO1_FLEXIO05 0x0164 0x0314 0x0380 0x4 0x1 +#define MX93_PAD_SD2_DATA2__GPIO3_IO05 0x0164 0x0314 0x0000 0x5 0x0 +#define MX93_PAD_SD2_DATA2__CCMSRCGPCMIX_STOP 0x0164 0x0314 0x0000 0x6 0x0 +#define MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x0168 0x0318 0x0000 0x0 0x0 +#define MX93_PAD_SD2_DATA3__LPTMR2_ALT1 0x0168 0x0318 0x0408 0x1 0x1 +#define MX93_PAD_SD2_DATA3__MQS2_LEFT 0x0168 0x0318 0x0000 0x2 0x0 +#define MX93_PAD_SD2_DATA3__FLEXIO1_FLEXIO06 0x0168 0x0318 0x0384 0x4 0x1 +#define MX93_PAD_SD2_DATA3__GPIO3_IO06 0x0168 0x0318 0x0000 0x5 0x0 +#define MX93_PAD_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET 0x0168 0x0318 0x0000 0x6 0x0 +#define MX93_PAD_SD2_RESET_B__USDHC2_RESET_B 0x016C 0x031C 0x0000 0x0 0x0 +#define MX93_PAD_SD2_RESET_B__LPTMR2_ALT2 0x016C 0x031C 0x040C 0x1 0x1 +#define MX93_PAD_SD2_RESET_B__FLEXIO1_FLEXIO07 0x016C 0x031C 0x0388 0x4 0x1 +#define MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x016C 0x031C 0x0000 0x5 0x0 +#define MX93_PAD_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET 0x016C 0x031C 0x0000 0x6 0x0 +#define MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x0170 0x0320 0x0000 0x10 0x0 +#define MX93_PAD_I2C1_SCL__I3C1_SCL 0x0170 0x0320 0x0000 0x1 0x0 +#define MX93_PAD_I2C1_SCL__LPUART1_DCB_B 0x0170 0x0320 0x0000 0x2 0x0 +#define MX93_PAD_I2C1_SCL__TPM2_CH0 0x0170 0x0320 0x0000 0x3 0x0 +#define MX93_PAD_I2C1_SCL__GPIO1_IO00 0x0170 0x0320 0x0000 0x5 0x0 +#define MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x0174 0x0324 0x0000 0x10 0x0 +#define MX93_PAD_I2C1_SDA__I3C1_SDA 0x0174 0x0324 0x0000 0x1 0x0 +#define MX93_PAD_I2C1_SDA__LPUART1_RIN_B 0x0174 0x0324 0x0000 0x2 0x0 +#define MX93_PAD_I2C1_SDA__TPM2_CH1 0x0174 0x0324 0x0000 0x3 0x0 +#define MX93_PAD_I2C1_SDA__GPIO1_IO01 0x0174 0x0324 0x0000 0x5 0x0 +#define MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x0178 0x0328 0x0000 0x10 0x0 +#define MX93_PAD_I2C2_SCL__I3C1_PUR 0x0178 0x0328 0x0000 0x1 0x0 +#define MX93_PAD_I2C2_SCL__LPUART2_DCB_B 0x0178 0x0328 0x0000 0x2 0x0 +#define MX93_PAD_I2C2_SCL__TPM2_CH2 0x0178 0x0328 0x0000 0x3 0x0 +#define MX93_PAD_I2C2_SCL__SAI1_RX_SYNC 0x0178 0x0328 0x0000 0x4 0x0 +#define MX93_PAD_I2C2_SCL__GPIO1_IO02 0x0178 0x0328 0x0000 0x5 0x0 +#define MX93_PAD_I2C2_SCL__I3C1_PUR_B 0x0178 0x0328 0x0000 0x6 0x0 +#define MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x017C 0x032C 0x0000 0x10 0x0 +#define MX93_PAD_I2C2_SDA__LPUART2_RIN_B 0x017C 0x032C 0x0000 0x2 0x0 +#define MX93_PAD_I2C2_SDA__TPM2_CH3 0x017C 0x032C 0x0000 0x3 0x0 +#define MX93_PAD_I2C2_SDA__SAI1_RX_BCLK 0x017C 0x032C 0x0000 0x4 0x0 +#define MX93_PAD_I2C2_SDA__GPIO1_IO03 0x017C 0x032C 0x0000 0x5 0x0 +#define MX93_PAD_UART1_RXD__LPUART1_RX 0x0180 0x0330 0x0000 0x0 0x0 +#define MX93_PAD_UART1_RXD__S400_UART_RX 0x0180 0x0330 0x0000 0x1 0x0 +#define MX93_PAD_UART1_RXD__LPSPI2_SIN 0x0180 0x0330 0x0000 0x2 0x0 +#define MX93_PAD_UART1_RXD__TPM1_CH0 0x0180 0x0330 0x0000 0x3 0x0 +#define MX93_PAD_UART1_RXD__GPIO1_IO04 0x0180 0x0330 0x0000 0x5 0x0 +#define MX93_PAD_UART1_TXD__LPUART1_TX 0x0184 0x0334 0x0000 0x0 0x0 +#define MX93_PAD_UART1_TXD__S400_UART_TX 0x0184 0x0334 0x0000 0x1 0x0 +#define MX93_PAD_UART1_TXD__LPSPI2_PCS0 0x0184 0x0334 0x0000 0x2 0x0 +#define MX93_PAD_UART1_TXD__TPM1_CH1 0x0184 0x0334 0x0000 0x3 0x0 +#define MX93_PAD_UART1_TXD__GPIO1_IO05 0x0184 0x0334 0x0000 0x5 0x0 +#define MX93_PAD_UART2_RXD__LPUART2_RX 0x0188 0x0338 0x0000 0x0 0x0 +#define MX93_PAD_UART2_RXD__LPUART1_CTS_B 0x0188 0x0338 0x0000 0x1 0x0 +#define MX93_PAD_UART2_RXD__LPSPI2_SOUT 0x0188 0x0338 0x0000 0x2 0x0 +#define MX93_PAD_UART2_RXD__TPM1_CH2 0x0188 0x0338 0x0000 0x3 0x0 +#define MX93_PAD_UART2_RXD__SAI1_MCLK 0x0188 0x0338 0x0448 0x4 0x0 +#define MX93_PAD_UART2_RXD__GPIO1_IO06 0x0188 0x0338 0x0000 0x5 0x0 +#define MX93_PAD_UART2_TXD__LPUART2_TX 0x018C 0x033C 0x0000 0x0 0x0 +#define MX93_PAD_UART2_TXD__LPUART1_RTS_B 0x018C 0x033C 0x0000 0x1 0x0 +#define MX93_PAD_UART2_TXD__LPSPI2_SCK 0x018C 0x033C 0x0000 0x2 0x0 +#define MX93_PAD_UART2_TXD__TPM1_CH3 0x018C 0x033C 0x0000 0x3 0x0 +#define MX93_PAD_UART2_TXD__GPIO1_IO07 0x018C 0x033C 0x0000 0x5 0x0 +#define MX93_PAD_PDM_CLK__PDM_CLK 0x0190 0x0340 0x0000 0x0 0x0 +#define MX93_PAD_PDM_CLK__MQS1_LEFT 0x0190 0x0340 0x0000 0x1 0x0 +#define MX93_PAD_PDM_CLK__LPTMR1_ALT1 0x0190 0x0340 0x0000 0x4 0x0 +#define MX93_PAD_PDM_CLK__GPIO1_IO08 0x0190 0x0340 0x0000 0x5 0x0 +#define MX93_PAD_PDM_CLK__CAN1_TX 0x0190 0x0340 0x0000 0x6 0x0 +#define MX93_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM00 0x0194 0x0344 0x0438 0x0 0x2 +#define MX93_PAD_PDM_BIT_STREAM0__MQS1_RIGHT 0x0194 0x0344 0x0000 0x1 0x0 +#define MX93_PAD_PDM_BIT_STREAM0__LPSPI1_PCS1 0x0194 0x0344 0x0000 0x2 0x0 +#define MX93_PAD_PDM_BIT_STREAM0__TPM1_EXTCLK 0x0194 0x0344 0x0000 0x3 0x0 +#define MX93_PAD_PDM_BIT_STREAM0__LPTMR1_ALT2 0x0194 0x0344 0x0000 0x4 0x0 +#define MX93_PAD_PDM_BIT_STREAM0__GPIO1_IO09 0x0194 0x0344 0x0000 0x5 0x0 +#define MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x0194 0x0344 0x0360 0x6 0x0 +#define MX93_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM01 0x0198 0x0348 0x043C 0x0 0x2 +#define MX93_PAD_PDM_BIT_STREAM1__NMI_GLUE_NMI 0x0198 0x0348 0x0000 0x1 0x0 +#define MX93_PAD_PDM_BIT_STREAM1__LPSPI2_PCS1 0x0198 0x0348 0x0000 0x2 0x0 +#define MX93_PAD_PDM_BIT_STREAM1__TPM2_EXTCLK 0x0198 0x0348 0x0000 0x3 0x0 +#define MX93_PAD_PDM_BIT_STREAM1__LPTMR1_ALT3 0x0198 0x0348 0x0000 0x4 0x0 +#define MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x0198 0x0348 0x0000 0x5 0x0 +#define MX93_PAD_PDM_BIT_STREAM1__CCMSRCGPCMIX_EXT_CLK1 0x0198 0x0348 0x0368 0x6 0x1 +#define MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x019C 0x034C 0x0000 0x0 0x0 +#define MX93_PAD_SAI1_TXFS__SAI1_TX_DATA01 0x019C 0x034C 0x0000 0x1 0x0 +#define MX93_PAD_SAI1_TXFS__LPSPI1_PCS0 0x019C 0x034C 0x0000 0x2 0x0 +#define MX93_PAD_SAI1_TXFS__LPUART2_DTR_B 0x019C 0x034C 0x0000 0x3 0x0 +#define MX93_PAD_SAI1_TXFS__MQS1_LEFT 0x019C 0x034C 0x0000 0x4 0x0 +#define MX93_PAD_SAI1_TXFS__GPIO1_IO11 0x019C 0x034C 0x0000 0x5 0x0 +#define MX93_PAD_SAI1_TXC__SAI1_TX_BCLK 0x01A0 0x0350 0x0000 0x0 0x0 +#define MX93_PAD_SAI1_TXC__LPUART2_CTS_B 0x01A0 0x0350 0x0000 0x1 0x0 +#define MX93_PAD_SAI1_TXC__LPSPI1_SIN 0x01A0 0x0350 0x0000 0x2 0x0 +#define MX93_PAD_SAI1_TXC__LPUART1_DSR_B 0x01A0 0x0350 0x0000 0x3 0x0 +#define MX93_PAD_SAI1_TXC__CAN1_RX 0x01A0 0x0350 0x0360 0x4 0x1 +#define MX93_PAD_SAI1_TXC__GPIO1_IO12 0x01A0 0x0350 0x0000 0x5 0x0 +#define MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00 0x01A4 0x0354 0x0000 0x0 0x0 +#define MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x01A4 0x0354 0x0000 0x1 0x0 +#define MX93_PAD_SAI1_TXD0__LPSPI1_SCK 0x01A4 0x0354 0x0000 0x2 0x0 +#define MX93_PAD_SAI1_TXD0__LPUART1_DTR_B 0x01A4 0x0354 0x0000 0x3 0x0 +#define MX93_PAD_SAI1_TXD0__CAN1_TX 0x01A4 0x0354 0x0000 0x4 0x0 +#define MX93_PAD_SAI1_TXD0__GPIO1_IO13 0x01A4 0x0354 0x0000 0x5 0x0 +#define MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00 0x01A8 0x0358 0x0000 0x0 0x0 +#define MX93_PAD_SAI1_RXD0__SAI1_MCLK 0x01A8 0x0358 0x0448 0x1 0x1 +#define MX93_PAD_SAI1_RXD0__LPSPI1_SOUT 0x01A8 0x0358 0x0000 0x2 0x0 +#define MX93_PAD_SAI1_RXD0__LPUART2_DSR_B 0x01A8 0x0358 0x0000 0x3 0x0 +#define MX93_PAD_SAI1_RXD0__MQS1_RIGHT 0x01A8 0x0358 0x0000 0x4 0x0 +#define MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x01A8 0x0358 0x0000 0x5 0x0 +#define MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x01AC 0x035C 0x0000 0x0 0x0 +#define MX93_PAD_WDOG_ANY__GPIO1_IO15 0x01AC 0x035C 0x0000 0x5 0x0 + +#endif /* __DTS_IMX93_PINFUNC_H */ diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi new file mode 100644 index 000000000000..f83a07c7c9b1 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -0,0 +1,334 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 NXP + */ + +#include <dt-bindings/clock/imx93-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "imx93-pinfunc.h" + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &lpuart1; + serial1 = &lpuart2; + serial2 = &lpuart3; + serial3 = &lpuart4; + serial4 = &lpuart5; + serial5 = &lpuart6; + serial6 = &lpuart7; + serial7 = &lpuart8; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + A55_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0>; + enable-method = "psci"; + #cooling-cells = <2>; + }; + + A55_1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x100>; + enable-method = "psci"; + #cooling-cells = <2>; + }; + + }; + + osc_32k: clock-osc-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "osc_32k"; + }; + + osc_24m: clock-osc-24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc_24m"; + }; + + clk_ext1: clock-ext1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext1"; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>; + arm,no-tick-in-suspend; + interrupt-parent = <&gic>; + }; + + gic: interrupt-controller@48000000 { + compatible = "arm,gic-v3"; + reg = <0 0x48000000 0 0x10000>, + <0 0x48040000 0 0xc0000>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x80000000>, + <0x28000000 0x0 0x28000000 0x10000000>; + + aips1: bus@44000000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x44000000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mu1: mailbox@44230000 { + compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; + reg = <0x44230000 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + system_counter: timer@44290000 { + compatible = "nxp,sysctr-timer"; + reg = <0x44290000 0x30000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc_24m>; + clock-names = "per"; + }; + + lpuart1: serial@44380000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x44380000 0x1000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART1_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart2: serial@44390000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x44390000 0x1000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART2_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + iomuxc: pinctrl@443c0000 { + compatible = "fsl,imx93-iomuxc"; + reg = <0x443c0000 0x10000>; + status = "okay"; + }; + + clk: clock-controller@44450000 { + compatible = "fsl,imx93-ccm"; + reg = <0x44450000 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>; + clock-names = "osc_32k", "osc_24m", "clk_ext1"; + status = "okay"; + }; + + anatop: anatop@44480000 { + compatible = "fsl,imx93-anatop", "syscon"; + reg = <0x44480000 0x10000>; + }; + }; + + aips2: bus@42000000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x42000000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mu2: mailbox@42440000 { + compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; + reg = <0x42440000 0x10000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lpuart3: serial@42570000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x42570000 0x1000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART3_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart4: serial@42580000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x42580000 0x1000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART4_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart5: serial@42590000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x42590000 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART5_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart6: serial@425a0000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x425a0000 0x1000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART6_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart7: serial@42690000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x42690000 0x1000>; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART7_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart8: serial@426a0000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x426a0000 0x1000>; + interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART8_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + }; + + aips3: bus@42800000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x42800000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usdhc1: mmc@42850000 { + compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; + reg = <0x42850000 0x10000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_USDHC1_GATE>; + clock-names = "ipg", "ahb", "per"; + bus-width = <8>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc2: mmc@42860000 { + compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; + reg = <0x42860000 0x10000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_USDHC2_GATE>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc3: mmc@428b0000 { + compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; + reg = <0x428b0000 0x10000>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_USDHC3_GATE>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + }; + + gpio2: gpio@43810080 { + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; + reg = <0x43810080 0x1000>, <0x43810040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 32 32>; + }; + + gpio3: gpio@43820080 { + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; + reg = <0x43820080 0x1000>, <0x43820040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 64 32>; + }; + + gpio4: gpio@43830080 { + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; + reg = <0x43830080 0x1000>, <0x43830040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 96 32>; + }; + + gpio1: gpio@47400080 { + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; + reg = <0x47400080 0x1000>, <0x47400040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 0 32>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi index c2f0f1a1566c..104bdd4e437a 100644 --- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi +++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi @@ -16,7 +16,6 @@ }; chosen { - // bootargs = "console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200"; stdout-path = &uart3; }; @@ -26,21 +25,21 @@ pinctrl-0 = <&pinctrl_gpiobutton>; autorepeat; - switch1 { + switch-1 { label = "switch1"; linux,code = <BTN_0>; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; wakeup-source; }; - btn2: switch2 { + btn2: switch-2 { label = "switch2"; linux,code = <BTN_1>; gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; wakeup-source; }; - switch3 { + switch-3 { label = "switch3"; linux,code = <BTN_2>; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; @@ -272,7 +271,6 @@ status = "okay"; }; -/* UART4 is assigned to Cortex-M4 */ &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index f68580dc87d8..0192a01bf852 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -49,9 +49,9 @@ ramoops@32000000 { compatible = "ramoops"; reg = <0x0 0x32000000 0x0 0x00100000>; - record-size = <0x00020000>; - console-size = <0x00020000>; - ftrace-size = <0x00020000>; + record-size = <0x00020000>; + console-size = <0x00020000>; + ftrace-size = <0x00020000>; }; }; @@ -63,9 +63,9 @@ compatible = "syscon-reboot-mode"; offset = <0x0>; - mode-normal = <0x77665501>; - mode-bootloader = <0x77665500>; - mode-recovery = <0x77665502>; + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; }; }; @@ -74,7 +74,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>; - power { + key-power { wakeup-source; gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index 6b3057a09251..8343d0cedde3 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -479,7 +479,7 @@ reg = <0x0 0xfdf00000 0x0 0x1000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; dma-names = "rx", "tx"; - dmas = <&dma0 2 &dma0 3>; + dmas = <&dma0 2 &dma0 3>; clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>, <&crg_ctrl HI3660_CLK_GATE_UART1>; clock-names = "uartclk", "apb_pclk"; @@ -493,7 +493,7 @@ reg = <0x0 0xfdf03000 0x0 0x1000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; dma-names = "rx", "tx"; - dmas = <&dma0 4 &dma0 5>; + dmas = <&dma0 4 &dma0 5>; clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>, <&crg_ctrl HI3660_PCLK>; clock-names = "uartclk", "apb_pclk"; @@ -519,7 +519,7 @@ reg = <0x0 0xfdf01000 0x0 0x1000>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; dma-names = "rx", "tx"; - dmas = <&dma0 6 &dma0 7>; + dmas = <&dma0 6 &dma0 7>; clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>, <&crg_ctrl HI3660_CLK_GATE_UART4>; clock-names = "uartclk", "apb_pclk"; @@ -533,7 +533,7 @@ reg = <0x0 0xfdf05000 0x0 0x1000>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; dma-names = "rx", "tx"; - dmas = <&dma0 8 &dma0 9>; + dmas = <&dma0 8 &dma0 9>; clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>, <&crg_ctrl HI3660_CLK_GATE_UART5>; clock-names = "uartclk", "apb_pclk"; diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi index 3125c3869c69..886b93c5893a 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi @@ -324,7 +324,7 @@ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pmx0 0 13 4 &pmx0 7 17 1>; + gpio-ranges = <&pmx0 0 13 4 &pmx0 7 17 1>; interrupt-controller; #interrupt-cells = <2>; clocks = <&crg_ctrl HI3670_PCLK_GPIO3>; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 3df2afb2f637..629e604aa281 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -54,9 +54,9 @@ ramoops@21f00000 { compatible = "ramoops"; reg = <0x0 0x21f00000 0x0 0x00100000>; - record-size = <0x00020000>; - console-size = <0x00020000>; - ftrace-size = <0x00020000>; + record-size = <0x00020000>; + console-size = <0x00020000>; + ftrace-size = <0x00020000>; }; /* global autoconfigured region for contiguous allocations */ @@ -76,9 +76,9 @@ compatible = "syscon-reboot-mode"; offset = <0x0>; - mode-normal = <0x77665501>; - mode-bootloader = <0x77665500>; - mode-recovery = <0x77665502>; + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts index 40f3e00ac832..c4eaebbb448f 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts +++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts @@ -27,12 +27,10 @@ stdout-path = "serial0:115200n8"; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pwrbutton { + pwr-button { label = "Power Button"; gpios = <&porta 8 GPIO_ACTIVE_LOW>; linux,code = <116>; diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi index 70d7732dd348..2f8b03b0d365 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi @@ -537,7 +537,7 @@ port@1 { reg = <1>; - serdes-syscon= <&serdes_ctrl>; + serdes-syscon = <&serdes_ctrl>; port-rst-offset = <1>; port-mode-offset = <1>; media-type = "fiber"; @@ -546,7 +546,7 @@ port@4 { reg = <4>; phy-handle = <&phy0>; - serdes-syscon= <&serdes_ctrl>; + serdes-syscon = <&serdes_ctrl>; port-rst-offset = <4>; port-mode-offset = <2>; media-type = "copper"; @@ -555,7 +555,7 @@ port@5 { reg = <5>; phy-handle = <&phy1>; - serdes-syscon= <&serdes_ctrl>; + serdes-syscon = <&serdes_ctrl>; port-rst-offset = <5>; port-mode-offset = <3>; media-type = "copper"; diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi index 6baf6a686450..1a16662f8867 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi @@ -1422,7 +1422,7 @@ port@1 { reg = <1>; - serdes-syscon= <&serdes_ctrl>; + serdes-syscon = <&serdes_ctrl>; cpld-syscon = <&dsa_cpld 0x4>; port-rst-offset = <1>; port-mode-offset = <1>; @@ -1433,7 +1433,7 @@ port@4 { reg = <4>; phy-handle = <&phy0>; - serdes-syscon= <&serdes_ctrl>; + serdes-syscon = <&serdes_ctrl>; port-rst-offset = <4>; port-mode-offset = <2>; mc-mac-mask = [ff f0 00 00 00 00]; @@ -1443,7 +1443,7 @@ port@5 { reg = <5>; phy-handle = <&phy1>; - serdes-syscon= <&serdes_ctrl>; + serdes-syscon = <&serdes_ctrl>; port-rst-offset = <5>; port-mode-offset = <3>; mc-mac-mask = [ff f0 00 00 00 00]; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index caccb0334ada..7bbec8aafa62 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -581,7 +581,7 @@ sdramedac { compatible = "altr,sdram-edac-s10"; altr,sdr-syscon = <&sdr>; - interrupts = <16 4>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>; }; ocram-ecc@ff8cc000 { @@ -589,7 +589,7 @@ "altr,socfpga-a10-ocram-ecc"; reg = <0xff8cc000 0x100>; altr,ecc-parent = <&ocram>; - interrupts = <1 4>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; }; usb0-ecc@ff8c4000 { @@ -597,7 +597,7 @@ "altr,socfpga-usb-ecc"; reg = <0xff8c4000 0x100>; altr,ecc-parent = <&usb0>; - interrupts = <2 4>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; }; emac0-rx-ecc@ff8c0000 { @@ -605,7 +605,7 @@ "altr,socfpga-eth-mac-ecc"; reg = <0xff8c0000 0x100>; altr,ecc-parent = <&gmac0>; - interrupts = <4 4>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; }; emac0-tx-ecc@ff8c0400 { @@ -613,7 +613,7 @@ "altr,socfpga-eth-mac-ecc"; reg = <0xff8c0400 0x100>; altr,ecc-parent = <&gmac0>; - interrupts = <5 4>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; }; sdmmca-ecc@ff8c8c00 { @@ -621,8 +621,8 @@ "altr,socfpga-sdmmc-ecc"; reg = <0xff8c8c00 0x100>; altr,ecc-parent = <&mmc>; - interrupts = <14 4>, - <15 4>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>, + <15 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi index bec97480a960..78ae73d0cf36 100644 --- a/arch/arm64/boot/dts/lg/lg1312.dtsi +++ b/arch/arm64/boot/dts/lg/lg1312.dtsi @@ -52,7 +52,7 @@ }; psci { - compatible = "arm,psci-0.2", "arm,psci"; + compatible = "arm,psci-0.2", "arm,psci"; method = "smc"; cpu_suspend = <0x84000001>; cpu_off = <0x84000002>; @@ -150,7 +150,7 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; uart1: serial@fe100000 { compatible = "arm,pl011", "arm,primecell"; @@ -158,7 +158,7 @@ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; uart2: serial@fe200000 { compatible = "arm,pl011", "arm,primecell"; @@ -166,7 +166,7 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; spi0: spi@fe800000 { compatible = "arm,pl022", "arm,primecell"; @@ -197,7 +197,7 @@ reg = <0x0 0xfd400000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio1: gpio@fd410000 { #gpio-cells = <2>; @@ -206,7 +206,7 @@ reg = <0x0 0xfd410000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio2: gpio@fd420000 { #gpio-cells = <2>; @@ -215,7 +215,7 @@ reg = <0x0 0xfd420000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio3: gpio@fd430000 { #gpio-cells = <2>; @@ -232,7 +232,7 @@ reg = <0x0 0xfd440000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio5: gpio@fd450000 { #gpio-cells = <2>; @@ -241,7 +241,7 @@ reg = <0x0 0xfd450000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio6: gpio@fd460000 { #gpio-cells = <2>; @@ -250,7 +250,7 @@ reg = <0x0 0xfd460000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio7: gpio@fd470000 { #gpio-cells = <2>; @@ -259,7 +259,7 @@ reg = <0x0 0xfd470000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio8: gpio@fd480000 { #gpio-cells = <2>; @@ -268,7 +268,7 @@ reg = <0x0 0xfd480000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio9: gpio@fd490000 { #gpio-cells = <2>; @@ -277,7 +277,7 @@ reg = <0x0 0xfd490000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio10: gpio@fd4a0000 { #gpio-cells = <2>; @@ -286,7 +286,7 @@ reg = <0x0 0xfd4a0000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio11: gpio@fd4b0000 { #gpio-cells = <2>; @@ -303,7 +303,7 @@ reg = <0x0 0xfd4c0000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio13: gpio@fd4d0000 { #gpio-cells = <2>; @@ -312,7 +312,7 @@ reg = <0x0 0xfd4d0000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio14: gpio@fd4e0000 { #gpio-cells = <2>; @@ -321,7 +321,7 @@ reg = <0x0 0xfd4e0000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio15: gpio@fd4f0000 { #gpio-cells = <2>; @@ -330,7 +330,7 @@ reg = <0x0 0xfd4f0000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio16: gpio@fd500000 { #gpio-cells = <2>; @@ -339,7 +339,7 @@ reg = <0x0 0xfd500000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio17: gpio@fd510000 { #gpio-cells = <2>; diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi index ada3d4dc6305..2173316573be 100644 --- a/arch/arm64/boot/dts/lg/lg1313.dtsi +++ b/arch/arm64/boot/dts/lg/lg1313.dtsi @@ -52,7 +52,7 @@ }; psci { - compatible = "arm,psci-0.2", "arm,psci"; + compatible = "arm,psci-0.2", "arm,psci"; method = "smc"; cpu_suspend = <0x84000001>; cpu_off = <0x84000002>; @@ -150,7 +150,7 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; uart1: serial@fe100000 { compatible = "arm,pl011", "arm,primecell"; @@ -158,7 +158,7 @@ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; uart2: serial@fe200000 { compatible = "arm,pl011", "arm,primecell"; @@ -166,7 +166,7 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; spi0: spi@fe800000 { compatible = "arm,pl022", "arm,primecell"; @@ -197,7 +197,7 @@ reg = <0x0 0xfd400000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio1: gpio@fd410000 { #gpio-cells = <2>; @@ -206,7 +206,7 @@ reg = <0x0 0xfd410000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio2: gpio@fd420000 { #gpio-cells = <2>; @@ -215,7 +215,7 @@ reg = <0x0 0xfd420000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio3: gpio@fd430000 { #gpio-cells = <2>; @@ -232,7 +232,7 @@ reg = <0x0 0xfd440000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio5: gpio@fd450000 { #gpio-cells = <2>; @@ -241,7 +241,7 @@ reg = <0x0 0xfd450000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio6: gpio@fd460000 { #gpio-cells = <2>; @@ -250,7 +250,7 @@ reg = <0x0 0xfd460000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio7: gpio@fd470000 { #gpio-cells = <2>; @@ -259,7 +259,7 @@ reg = <0x0 0xfd470000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio8: gpio@fd480000 { #gpio-cells = <2>; @@ -268,7 +268,7 @@ reg = <0x0 0xfd480000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio9: gpio@fd490000 { #gpio-cells = <2>; @@ -277,7 +277,7 @@ reg = <0x0 0xfd490000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio10: gpio@fd4a0000 { #gpio-cells = <2>; @@ -286,7 +286,7 @@ reg = <0x0 0xfd4a0000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio11: gpio@fd4b0000 { #gpio-cells = <2>; @@ -303,7 +303,7 @@ reg = <0x0 0xfd4c0000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio13: gpio@fd4d0000 { #gpio-cells = <2>; @@ -312,7 +312,7 @@ reg = <0x0 0xfd4d0000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio14: gpio@fd4e0000 { #gpio-cells = <2>; @@ -321,7 +321,7 @@ reg = <0x0 0xfd4e0000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio15: gpio@fd4f0000 { #gpio-cells = <2>; @@ -330,7 +330,7 @@ reg = <0x0 0xfd4f0000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio16: gpio@fd500000 { #gpio-cells = <2>; @@ -339,7 +339,7 @@ reg = <0x0 0xfd500000 0x1000>; clocks = <&clk_bus>; clock-names = "apb_pclk"; - status="disabled"; + status = "disabled"; }; gpio17: gpio@fd510000 { #gpio-cells = <2>; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 1c794cdcb8e6..b6d493e34dc5 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -24,3 +24,4 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db-B.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb +dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi new file mode 100644 index 000000000000..80b44c7df56a --- /dev/null +++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree For AC5. + * + * Copyright (C) 2021 Marvell + * Copyright (C) 2022 Allied Telesis Labs + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "Marvell AC5 SoC"; + compatible = "marvell,ac5"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + internal-regs@7f000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + /* 16M internal register @ 0x7f00_0000 */ + ranges = <0x0 0x0 0x7f000000 0x1000000>; + dma-coherent; + + uart0: serial@12000 { + compatible = "snps,dw-apb-uart"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&cnm_clock>; + status = "okay"; + }; + + mdio: mdio@22004 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x22004 0x4>; + clocks = <&cnm_clock>; + }; + + i2c0: i2c@11000{ + compatible = "marvell,mv78230-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&cnm_clock>; + clock-names = "core"; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency=<100000>; + + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&i2c0_pins>; + pinctrl-1 = <&i2c0_gpio>; + scl_gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>; + sda_gpio = <&gpio0 27 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + i2c1: i2c@11100{ + compatible = "marvell,mv78230-i2c"; + reg = <0x11100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&cnm_clock>; + clock-names = "core"; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency=<100000>; + + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&i2c1_pins>; + pinctrl-1 = <&i2c1_gpio>; + scl_gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; + sda_gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; + reg = <0x18100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl0 0 0 32>; + marvell,pwm-offset = <0x1f0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpio1: gpio@18140 { + reg = <0x18140 0x40>; + compatible = "marvell,orion-gpio"; + ngpios = <14>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl0 0 32 14>; + marvell,pwm-offset = <0x1f0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + /* + * Dedicated section for devices behind 32bit controllers so we + * can configure specific DMA mapping for them + */ + behind-32bit-controller@7f000000 { + compatible = "simple-bus"; + #address-cells = <0x2>; + #size-cells = <0x2>; + ranges = <0x0 0x0 0x0 0x7f000000 0x0 0x1000000>; + /* Host phy ram starts at 0x200M */ + dma-ranges = <0x0 0x0 0x2 0x0 0x1 0x0>; + dma-coherent; + + eth0: ethernet@20000 { + compatible = "marvell,armada-ac5-neta"; + reg = <0x0 0x20000 0x0 0x4000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cnm_clock>; + phy-mode = "sgmii"; + status = "disabled"; + }; + + eth1: ethernet@24000 { + compatible = "marvell,armada-ac5-neta"; + reg = <0x0 0x24000 0x0 0x4000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cnm_clock>; + phy-mode = "sgmii"; + status = "disabled"; + }; + + usb0: usb@80000 { + compatible = "marvell,orion-ehci"; + reg = <0x0 0x80000 0x0 0x500>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + usb1: usb@a0000 { + compatible = "marvell,orion-ehci"; + reg = <0x0 0xa0000 0x0 0x500>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + pinctrl0: pinctrl@80020100 { + compatible = "marvell,ac5-pinctrl"; + reg = <0 0x80020100 0 0x20>; + + i2c0_pins: i2c0-pins { + marvell,pins = "mpp26", "mpp27"; + marvell,function = "i2c0"; + }; + + i2c0_gpio: i2c0-gpio-pins { + marvell,pins = "mpp26", "mpp27"; + marvell,function = "gpio"; + }; + + i2c1_pins: i2c1-pins { + marvell,pins = "mpp20", "mpp21"; + marvell,function = "i2c1"; + }; + + i2c1_gpio: i2c1-gpio-pins { + marvell,pins = "mpp20", "mpp21"; + marvell,function = "i2c1"; + }; + }; + + spi0: spi@805a0000 { + compatible = "marvell,armada-3700-spi"; + reg = <0x0 0x805a0000 0x0 0x50>; + #address-cells = <0x1>; + #size-cells = <0x0>; + clocks = <&spi_clock>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + num-cs = <1>; + status = "disabled"; + }; + + spi1: spi@805a8000 { + compatible = "marvell,armada-3700-spi"; + reg = <0x0 0x805a8000 0x0 0x50>; + #address-cells = <0x1>; + #size-cells = <0x0>; + clocks = <&spi_clock>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + num-cs = <1>; + status = "disabled"; + }; + + gic: interrupt-controller@80600000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x80600000 0x0 0x10000>, /* GICD */ + <0x0 0x80660000 0x0 0x40000>; /* GICR */ + interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + clocks { + cnm_clock: cnm-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <328000000>; + }; + + spi_clock: spi-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx35xx-rd.dts b/arch/arm64/boot/dts/marvell/ac5-98dx35xx-rd.dts new file mode 100644 index 000000000000..f0ebdb84eec9 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/ac5-98dx35xx-rd.dts @@ -0,0 +1,101 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree For RD-AC5X. + * + * Copyright (C) 2021 Marvell + * Copyright (C) 2022 Allied Telesis Labs + */ +/* + * Device Tree file for Marvell Alleycat 5X development board + * This board file supports the B configuration of the board + */ + +/dts-v1/; + +#include "ac5-98dx35xx.dtsi" + +/ { + model = "Marvell RD-AC5X Board"; + compatible = "marvell,rd-ac5x", "marvell,ac5x", "marvell,ac5"; + + aliases { + serial0 = &uart0; + spiflash0 = &spiflash0; + gpio0 = &gpio0; + gpio1 = &gpio1; + ethernet0 = ð0; + ethernet1 = ð1; + }; + + memory@0 { + device_type = "memory"; + reg = <0x2 0x00000000 0x0 0x40000000>; + }; + + usb1phy: usb-phy { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +ð0 { + status = "okay"; + phy-handle = <&phy0>; +}; + +/* USB0 is a host USB */ +&usb0 { + status = "okay"; +}; + +/* USB1 is a peripheral USB */ +&usb1 { + status = "okay"; + phys = <&usb1phy>; + phy-names = "usb-phy"; + dr_mode = "peripheral"; +}; + +&spi0 { + status = "okay"; + + spiflash0: flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */ + spi-rx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */ + reg = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "spi_flash_part0"; + reg = <0x0 0x800000>; + }; + + parition@1 { + label = "spi_flash_part1"; + reg = <0x800000 0x700000>; + }; + + parition@2 { + label = "spi_flash_part2"; + reg = <0xF00000 0x100000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx35xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx35xx.dtsi new file mode 100644 index 000000000000..2ab72f854bea --- /dev/null +++ b/arch/arm64/boot/dts/marvell/ac5-98dx35xx.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree For AC5X. + * + * Copyright (C) 2022 Allied Telesis Labs + */ + +#include "ac5-98dx25xx.dtsi" + +/ { + model = "Marvell AC5X SoC"; + compatible = "marvell,ac5x", "marvell,ac5"; +}; + +&cnm_clock { + clock-frequency = <325000000>; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index caf9c8529fca..de8d0cfa4cb4 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -35,7 +35,7 @@ leds { compatible = "gpio-leds"; - red { + led { label = "mox:red:activity"; gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>; linux,default-trigger = "default-on"; @@ -45,7 +45,7 @@ gpio-keys { compatible = "gpio-keys"; - reset { + key-reset { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts index 39a8e5e99d79..b9ba7c452a77 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts @@ -37,7 +37,7 @@ los-gpio = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>; mod-def0-gpio = <&sfp_gpio 2 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>; }; /* SFP 1G */ @@ -47,7 +47,7 @@ los-gpio = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>; mod-def0-gpio = <&sfp_gpio 6 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts index 871f84b4a6ed..15f6ca4df121 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -94,7 +94,7 @@ pinctrl-0 = <&cp0_gpio_reset_pins &cp1_wps_button_pins>; pinctrl-names = "default"; - button_0 { + button-0 { /* The rear button */ label = "Rear Button"; gpios = <&cp0_gpio2 7 GPIO_ACTIVE_LOW>; @@ -102,7 +102,7 @@ linux,code = <BTN_0>; }; - button_1 { + button-1 { /* The wps button */ label = "WPS Button"; gpios = <&cp1_gpio1 30 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi index 779cf167c33e..c0389dd17340 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi @@ -68,7 +68,7 @@ los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>; mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp1_sfpp0_pins>; maximum-power-milliwatt = <2000>; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts index 74bed79e4f5e..cf868e0bbb9c 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts @@ -70,7 +70,7 @@ los-gpio = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>; mod-def0-gpio = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>; maximum-power-milliwatt = <3000>; }; @@ -80,7 +80,7 @@ los-gpio = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>; mod-def0-gpio = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>; maximum-power-milliwatt = <3000>; }; diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi index 7e20987253a3..f58402eb9536 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi @@ -404,7 +404,7 @@ &cp0_usb3_1 { status = "okay"; usb-phy = <&cp0_usb3_0_phy1>; - phys = <&cp0_utmi1>; + phys = <&cp0_utmi1>; phy-names = "utmi"; dr_mode = "host"; }; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index c7d4636a2cb7..af362a085a02 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -37,7 +37,12 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r1.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r2.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts index 11aa135aa0f3..9b1af9c80130 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts @@ -106,7 +106,7 @@ }; ð { - phy-mode ="rgmii-rxid"; + phy-mode = "rgmii-rxid"; phy-handle = <ðernet_phy0>; mediatek,tx-delay-ps = <1530>; snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index 623eb3beabf2..4797537cb368 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -329,6 +329,7 @@ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_LOW>; clocks = <&infracfg CLK_INFRA_M4U>; clock-names = "bclk"; + mediatek,infracfg = <&infracfg>; mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, <&larb3>, <&larb6>; #iommu-cells = <1>; @@ -346,6 +347,7 @@ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>; clocks = <&infracfg CLK_INFRA_M4U>; clock-names = "bclk"; + mediatek,infracfg = <&infracfg>; mediatek,larbs = <&larb4>, <&larb5>, <&larb7>; #iommu-cells = <1>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi index c85659d0ff5d..d3bce9429e9b 100644 --- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/mt6795-pinfunc.h> / { compatible = "mediatek,mt6795"; @@ -34,6 +35,8 @@ compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x000>; + cci-control-port = <&cci_control2>; + next-level-cache = <&l2_0>; }; cpu1: cpu@1 { @@ -41,6 +44,8 @@ compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x001>; + cci-control-port = <&cci_control2>; + next-level-cache = <&l2_0>; }; cpu2: cpu@2 { @@ -48,6 +53,8 @@ compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x002>; + cci-control-port = <&cci_control2>; + next-level-cache = <&l2_0>; }; cpu3: cpu@3 { @@ -55,6 +62,8 @@ compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x003>; + cci-control-port = <&cci_control2>; + next-level-cache = <&l2_0>; }; cpu4: cpu@100 { @@ -62,6 +71,8 @@ compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x100>; + cci-control-port = <&cci_control1>; + next-level-cache = <&l2_1>; }; cpu5: cpu@101 { @@ -69,6 +80,8 @@ compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x101>; + cci-control-port = <&cci_control1>; + next-level-cache = <&l2_1>; }; cpu6: cpu@102 { @@ -76,6 +89,8 @@ compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x102>; + cci-control-port = <&cci_control1>; + next-level-cache = <&l2_1>; }; cpu7: cpu@103 { @@ -83,27 +98,88 @@ compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x103>; + cci-control-port = <&cci_control1>; + next-level-cache = <&l2_1>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + + core1 { + cpu = <&cpu5>; + }; + + core2 { + cpu = <&cpu6>; + }; + + core3 { + cpu = <&cpu7>; + }; + }; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + cache-level = <2>; }; }; - system_clk: dummy13m { + clk26m: oscillator-26m { compatible = "fixed-clock"; - clock-frequency = <13000000>; #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; }; - rtc_clk: dummy32k { + clk32k: oscillator-32k { compatible = "fixed-clock"; - clock-frequency = <32000>; #clock-cells = <0>; + clock-frequency = <32000>; + clock-output-names = "clk32k"; }; - uart_clk: dummy26m { + system_clk: dummy13m { compatible = "fixed-clock"; - clock-frequency = <26000000>; + clock-frequency = <13000000>; #clock-cells = <0>; }; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_LOW>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + timer { compatible = "arm,armv8-timer"; interrupt-parent = <&gic>; @@ -117,59 +193,133 @@ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; }; - sysirq: intpol-controller@10200620 { - compatible = "mediatek,mt6795-sysirq", - "mediatek,mt6577-sysirq"; - interrupt-controller; - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - reg = <0 0x10200620 0 0x20>; - }; + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; - gic: interrupt-controller@10221000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - interrupt-controller; - reg = <0 0x10221000 0 0x1000>, - <0 0x10222000 0 0x2000>, - <0 0x10224000 0 0x2000>, - <0 0x10226000 0 0x2000>; - }; + pio: pinctrl@10005000 { + compatible = "mediatek,mt6795-pinctrl"; + reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>; + reg-names = "base", "eint"; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 196>; + interrupt-controller; + #interrupt-cells = <2>; + }; - uart0: serial@11002000 { - compatible = "mediatek,mt6795-uart", - "mediatek,mt6577-uart"; - reg = <0 0x11002000 0 0x400>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; - status = "disabled"; - }; + watchdog: watchdog@10007000 { + compatible = "mediatek,mt6795-wdt"; + reg = <0 0x10007000 0 0x100>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_LOW>; + #reset-cells = <1>; + timeout-sec = <20>; + }; - uart1: serial@11003000 { - compatible = "mediatek,mt6795-uart", - "mediatek,mt6577-uart"; - reg = <0 0x11003000 0 0x400>; - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; - status = "disabled"; - }; + timer: timer@10008000 { + compatible = "mediatek,mt6795-timer", + "mediatek,mt6577-timer"; + reg = <0 0x10008000 0 0x1000>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>; + clocks = <&system_clk>, <&clk32k>; + }; - uart2: serial@11004000 { - compatible = "mediatek,mt6795-uart", - "mediatek,mt6577-uart"; - reg = <0 0x11004000 0 0x400>; - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; - status = "disabled"; - }; + sysirq: intpol-controller@10200620 { + compatible = "mediatek,mt6795-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10200620 0 0x20>; + }; + + gic: interrupt-controller@10221000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x10221000 0 0x1000>, + <0 0x10222000 0 0x2000>, + <0 0x10224000 0 0x2000>, + <0 0x10226000 0 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + cci: cci@10390000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0x10390000 0 0x1000>; + ranges = <0 0 0x10390000 0x10000>; - uart3: serial@11005000 { - compatible = "mediatek,mt6795-uart", - "mediatek,mt6577-uart"; - reg = <0 0x11005000 0 0x400>; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; - status = "disabled"; + cci_control0: slave-if@1000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace-lite"; + reg = <0x1000 0x1000>; + }; + + cci_control1: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control2: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + + pmu@9000 { + compatible = "arm,cci-400-pmu,r1"; + reg = <0x9000 0x5000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt6795-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x400>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt6795-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x400>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,mt6795-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x400>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>; + status = "disabled"; + }; + + uart3: serial@11005000 { + compatible = "mediatek,mt6795-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11005000 0 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts index 2b9bf8dd14ec..d3f9eab2b784 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts @@ -8,6 +8,7 @@ /dts-v1/; #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> #include "mt7622.dtsi" #include "mt6380.dtsi" @@ -40,30 +41,32 @@ gpio-keys { compatible = "gpio-keys"; - factory { + factory-key { label = "factory"; linux,code = <BTN_0>; gpios = <&pio 0 GPIO_ACTIVE_HIGH>; }; - wps { + wps-key { label = "wps"; linux,code = <KEY_WPS_BUTTON>; - gpios = <&pio 102 GPIO_ACTIVE_HIGH>; + gpios = <&pio 102 GPIO_ACTIVE_LOW>; }; }; leds { compatible = "gpio-leds"; - green { + led-0 { label = "bpi-r64:pio:green"; + color = <LED_COLOR_ID_GREEN>; gpios = <&pio 89 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - red { + led-1 { label = "bpi-r64:pio:red"; + color = <LED_COLOR_ID_RED>; gpios = <&pio 88 GPIO_ACTIVE_HIGH>; default-state = "off"; }; @@ -336,14 +339,14 @@ i2c1_pins: i2c1-pins { mux { function = "i2c"; - groups = "i2c1_0"; + groups = "i2c1_0"; }; }; i2c2_pins: i2c2-pins { mux { function = "i2c"; - groups = "i2c2_0"; + groups = "i2c2_0"; }; }; @@ -366,14 +369,14 @@ irrx_pins: irrx-pins { mux { function = "ir"; - groups = "ir_1_rx"; + groups = "ir_1_rx"; }; }; irtx_pins: irtx-pins { mux { function = "ir"; - groups = "ir_1_tx"; + groups = "ir_1_tx"; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts index 596c073d8b05..36722cabe626 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -40,15 +40,14 @@ gpio-keys { compatible = "gpio-keys"; - poll-interval = <100>; - factory { + key-factory { label = "factory"; linux,code = <BTN_0>; gpios = <&pio 0 0>; }; - wps { + key-wps { label = "wps"; linux,code = <KEY_WPS_BUTTON>; gpios = <&pio 102 0>; @@ -298,14 +297,14 @@ i2c1_pins: i2c1-pins { mux { function = "i2c"; - groups = "i2c1_0"; + groups = "i2c1_0"; }; }; i2c2_pins: i2c2-pins { mux { function = "i2c"; - groups = "i2c2_0"; + groups = "i2c2_0"; }; }; @@ -328,14 +327,14 @@ irrx_pins: irrx-pins { mux { function = "ir"; - groups = "ir_1_rx"; + groups = "ir_1_rx"; }; }; irtx_pins: irtx-pins { mux { function = "ir"; - groups = "ir_1_tx"; + groups = "ir_1_tx"; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index dbcee8b4d8d8..146e18b5b1f4 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -118,8 +118,8 @@ }; psci { - compatible = "arm,psci-0.2"; - method = "smc"; + compatible = "arm,psci-0.2"; + method = "smc"; }; pmu { @@ -616,9 +616,9 @@ afe: audio-controller { compatible = "mediatek,mt7622-audio"; - interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "afe", "asys"; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "afe", "asys"; clocks = <&infracfg CLK_INFRA_AUDIO_PD>, <&topckgen CLK_TOP_AUD1_SEL>, diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi index d2636a0ed152..e3a407d03551 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi @@ -57,8 +57,8 @@ }; psci { - compatible = "arm,psci-0.2"; - method = "smc"; + compatible = "arm,psci-0.2"; + method = "smc"; }; reserved-memory { diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts index 44f6149c1307..28433b94f7c7 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts @@ -21,7 +21,7 @@ }; &gpio_keys { - /delete-node/tablet_mode; - /delete-node/volume_down; - /delete-node/volume_up; + /delete-node/switch-tablet-mode; + /delete-node/switch-volume-down; + /delete-node/switch-volume-up; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi index 9c75fbb31f98..e21feb85d822 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi @@ -53,7 +53,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_pins>; - lid { + switch-lid { label = "Lid"; gpios = <&pio 69 GPIO_ACTIVE_LOW>; linux,code = <SW_LID>; @@ -61,7 +61,7 @@ gpio-key,wakeup; }; - power { + switch-power { label = "Power"; gpios = <&pio 14 GPIO_ACTIVE_HIGH>; linux,code = <KEY_POWER>; @@ -69,7 +69,7 @@ gpio-key,wakeup; }; - tablet_mode { + switch-tablet-mode { label = "Tablet_mode"; gpios = <&pio 121 GPIO_ACTIVE_HIGH>; linux,code = <SW_TABLET_MODE>; @@ -77,13 +77,13 @@ gpio-key,wakeup; }; - volume_down { + switch-volume-down { label = "Volume_down"; gpios = <&pio 123 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; }; - volume_up { + switch-volume-up { label = "Volume_up"; gpios = <&pio 124 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; @@ -300,8 +300,8 @@ regulator-name = "VBUCKA"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1310000>; - regulator-min-microamp = <2000000>; - regulator-max-microamp = <4400000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <4400000>; regulator-ramp-delay = <10000>; regulator-always-on; regulator-allowed-modes = <DA9211_BUCK_MODE_SYNC @@ -312,8 +312,8 @@ regulator-name = "VBUCKB"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1310000>; - regulator-min-microamp = <2000000>; - regulator-max-microamp = <3000000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <3000000>; regulator-ramp-delay = <10000>; }; }; @@ -374,8 +374,8 @@ mmc-hs400-1_8v; cap-mmc-hw-reset; hs400-ds-delay = <0x14015>; - mediatek,hs200-cmd-int-delay=<30>; - mediatek,hs400-cmd-int-delay=<14>; + mediatek,hs200-cmd-int-delay = <30>; + mediatek,hs400-cmd-int-delay = <14>; mediatek,hs400-cmd-resp-sel-rising; vmmc-supply = <&mt6397_vemc_3v3_reg>; vqmmc-supply = <&mt6397_vio18_reg>; @@ -410,7 +410,7 @@ sd-uhs-sdr50; sd-uhs-sdr104; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; cap-sdio-irq; vmmc-supply = <&sdio_fixed_3v3>; vqmmc-supply = <&mt6397_vgp3_reg>; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index 4fa1e93302c7..0b5f154007be 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -122,8 +122,8 @@ regulator-name = "VBUCKA"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1310000>; - regulator-min-microamp = <2000000>; - regulator-max-microamp = <4400000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <4400000>; regulator-ramp-delay = <10000>; regulator-always-on; }; @@ -132,8 +132,8 @@ regulator-name = "VBUCKB"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1310000>; - regulator-min-microamp = <2000000>; - regulator-max-microamp = <3000000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <3000000>; regulator-ramp-delay = <10000>; }; }; @@ -148,8 +148,8 @@ bus-width = <8>; max-frequency = <50000000>; cap-mmc-highspeed; - mediatek,hs200-cmd-int-delay=<26>; - mediatek,hs400-cmd-int-delay=<14>; + mediatek,hs200-cmd-int-delay = <26>; + mediatek,hs400-cmd-int-delay = <14>; mediatek,hs400-cmd-resp-sel-rising; vmmc-supply = <&mt6397_vemc_3v3_reg>; vqmmc-supply = <&mt6397_vio18_reg>; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 40d7b47fc52e..f35111724363 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -246,9 +246,9 @@ psci { compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci"; method = "smc"; - cpu_suspend = <0x84000001>; - cpu_off = <0x84000002>; - cpu_on = <0x84000003>; + cpu_suspend = <0x84000001>; + cpu_off = <0x84000002>; + cpu_on = <0x84000003>; }; clk26m: oscillator0 { @@ -588,6 +588,7 @@ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>; clocks = <&infracfg CLK_INFRA_M4U>; clock-names = "bclk"; + mediatek,infracfg = <&infracfg>; mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, <&larb3>, <&larb4>, <&larb5>; #iommu-cells = <1>; @@ -790,9 +791,12 @@ nor_flash: spi@1100d000 { compatible = "mediatek,mt8173-nor"; reg = <0 0x1100d000 0 0xe0>; + assigned-clocks = <&topckgen CLK_TOP_SPI_SEL>; + assigned-clock-parents = <&clk26m>; clocks = <&pericfg CLK_PERI_SPI>, - <&topckgen CLK_TOP_SPINFI_IFR_SEL>; - clock-names = "spi", "sf"; + <&topckgen CLK_TOP_SPINFI_IFR_SEL>, + <&pericfg CLK_PERI_NFI>; + clock-names = "spi", "sf", "axi"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1505,7 +1509,7 @@ vcodec_enc_vp8: vcodec@19002000 { compatible = "mediatek,mt8173-vcodec-enc-vp8"; - reg = <0 0x19002000 0 0x1000>; /* VENC_LT_SYS */ + reg = <0 0x19002000 0 0x1000>; /* VENC_LT_SYS */ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>; iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>, <&iommu M4U_PORT_VENC_REC_FRM_SET2>, diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts index f3fd3cca23e9..52dc4a50e34d 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts @@ -134,7 +134,7 @@ vmmc-supply = <&mt6358_vmch_reg>; vqmmc-supply = <&mt6358_vmc_reg>; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; non-removable; }; @@ -412,6 +412,42 @@ }; +&cci { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu0 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu1 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu2 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu3 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu4 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&cpu5 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&cpu6 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&cpu7 { + proc-supply = <&mt6358_vproc11_reg>; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi index 2d7a193272ae..3ac83be53627 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi @@ -73,7 +73,7 @@ pinctrl-names = "default"; pinctrl-0 = <&volume_button_pins>; - volume_down { + button-volume-down { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <100>; @@ -81,7 +81,7 @@ gpios = <&pio 6 GPIO_ACTIVE_LOW>; }; - volume_up { + button-volume-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; debounce-interval = <100>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi index 28966a65391b..50a0dd36b5fb 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi @@ -45,7 +45,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pen_eject>; - pen-insert { + switch-pen-insert { label = "Pen Insert"; /* Insert = low, eject = high */ gpios = <&pio 6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index 8d5bf73a9099..b4b86bb1f1a7 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -144,7 +144,7 @@ pinctrl-names = "default"; pinctrl-0 = <&wifi_pins_wakeup>; - wowlan { + button-wowlan { label = "Wake on WiFi"; gpios = <&pio 113 GPIO_ACTIVE_HIGH>; linux,code = <KEY_WAKEUP>; @@ -230,6 +230,10 @@ status = "okay"; }; +&cci { + proc-supply = <&mt6358_vproc12_reg>; +}; + &cpu0 { proc-supply = <&mt6358_vproc12_reg>; }; @@ -276,6 +280,7 @@ avee-supply = <&ppvarp_lcd>; pp1800-supply = <&pp1800_lcd>; backlight = <&backlight_lcd0>; + rotation = <270>; port { panel_in: endpoint { remote-endpoint = <&dsi_out>; @@ -378,7 +383,7 @@ sd-uhs-sdr50; sd-uhs-sdr104; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; cap-sdio-irq; non-removable; no-mmc; @@ -817,6 +822,10 @@ }; }; +&mfg_async { + domain-supply = <&mt6358_vsram_gpu_reg>; +}; + &mfg { domain-supply = <&mt6358_vgpu_reg>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts index afeb5cd37826..530e0c9ce0c9 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts @@ -159,7 +159,7 @@ vmmc-supply = <&mt6358_vmch_reg>; vqmmc-supply = <&mt6358_vmc_reg>; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; non-removable; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 01e650251928..9d32871973a2 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -42,6 +42,252 @@ rdma1 = &rdma1; }; + cluster0_opp: opp-table-cluster0 { + compatible = "operating-points-v2"; + opp-shared; + opp0-793000000 { + opp-hz = /bits/ 64 <793000000>; + opp-microvolt = <650000>; + required-opps = <&opp2_00>; + }; + opp0-910000000 { + opp-hz = /bits/ 64 <910000000>; + opp-microvolt = <687500>; + required-opps = <&opp2_01>; + }; + opp0-1014000000 { + opp-hz = /bits/ 64 <1014000000>; + opp-microvolt = <718750>; + required-opps = <&opp2_02>; + }; + opp0-1131000000 { + opp-hz = /bits/ 64 <1131000000>; + opp-microvolt = <756250>; + required-opps = <&opp2_03>; + }; + opp0-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + opp-microvolt = <800000>; + required-opps = <&opp2_04>; + }; + opp0-1326000000 { + opp-hz = /bits/ 64 <1326000000>; + opp-microvolt = <818750>; + required-opps = <&opp2_05>; + }; + opp0-1417000000 { + opp-hz = /bits/ 64 <1417000000>; + opp-microvolt = <850000>; + required-opps = <&opp2_06>; + }; + opp0-1508000000 { + opp-hz = /bits/ 64 <1508000000>; + opp-microvolt = <868750>; + required-opps = <&opp2_07>; + }; + opp0-1586000000 { + opp-hz = /bits/ 64 <1586000000>; + opp-microvolt = <893750>; + required-opps = <&opp2_08>; + }; + opp0-1625000000 { + opp-hz = /bits/ 64 <1625000000>; + opp-microvolt = <906250>; + required-opps = <&opp2_09>; + }; + opp0-1677000000 { + opp-hz = /bits/ 64 <1677000000>; + opp-microvolt = <931250>; + required-opps = <&opp2_10>; + }; + opp0-1716000000 { + opp-hz = /bits/ 64 <1716000000>; + opp-microvolt = <943750>; + required-opps = <&opp2_11>; + }; + opp0-1781000000 { + opp-hz = /bits/ 64 <1781000000>; + opp-microvolt = <975000>; + required-opps = <&opp2_12>; + }; + opp0-1846000000 { + opp-hz = /bits/ 64 <1846000000>; + opp-microvolt = <1000000>; + required-opps = <&opp2_13>; + }; + opp0-1924000000 { + opp-hz = /bits/ 64 <1924000000>; + opp-microvolt = <1025000>; + required-opps = <&opp2_14>; + }; + opp0-1989000000 { + opp-hz = /bits/ 64 <1989000000>; + opp-microvolt = <1050000>; + required-opps = <&opp2_15>; + }; }; + + cluster1_opp: opp-table-cluster1 { + compatible = "operating-points-v2"; + opp-shared; + opp1-793000000 { + opp-hz = /bits/ 64 <793000000>; + opp-microvolt = <700000>; + required-opps = <&opp2_00>; + }; + opp1-910000000 { + opp-hz = /bits/ 64 <910000000>; + opp-microvolt = <725000>; + required-opps = <&opp2_01>; + }; + opp1-1014000000 { + opp-hz = /bits/ 64 <1014000000>; + opp-microvolt = <750000>; + required-opps = <&opp2_02>; + }; + opp1-1131000000 { + opp-hz = /bits/ 64 <1131000000>; + opp-microvolt = <775000>; + required-opps = <&opp2_03>; + }; + opp1-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + opp-microvolt = <800000>; + required-opps = <&opp2_04>; + }; + opp1-1326000000 { + opp-hz = /bits/ 64 <1326000000>; + opp-microvolt = <825000>; + required-opps = <&opp2_05>; + }; + opp1-1417000000 { + opp-hz = /bits/ 64 <1417000000>; + opp-microvolt = <850000>; + required-opps = <&opp2_06>; + }; + opp1-1508000000 { + opp-hz = /bits/ 64 <1508000000>; + opp-microvolt = <875000>; + required-opps = <&opp2_07>; + }; + opp1-1586000000 { + opp-hz = /bits/ 64 <1586000000>; + opp-microvolt = <900000>; + required-opps = <&opp2_08>; + }; + opp1-1625000000 { + opp-hz = /bits/ 64 <1625000000>; + opp-microvolt = <912500>; + required-opps = <&opp2_09>; + }; + opp1-1677000000 { + opp-hz = /bits/ 64 <1677000000>; + opp-microvolt = <931250>; + required-opps = <&opp2_10>; + }; + opp1-1716000000 { + opp-hz = /bits/ 64 <1716000000>; + opp-microvolt = <950000>; + required-opps = <&opp2_11>; + }; + opp1-1781000000 { + opp-hz = /bits/ 64 <1781000000>; + opp-microvolt = <975000>; + required-opps = <&opp2_12>; + }; + opp1-1846000000 { + opp-hz = /bits/ 64 <1846000000>; + opp-microvolt = <1000000>; + required-opps = <&opp2_13>; + }; + opp1-1924000000 { + opp-hz = /bits/ 64 <1924000000>; + opp-microvolt = <1025000>; + required-opps = <&opp2_14>; + }; + opp1-1989000000 { + opp-hz = /bits/ 64 <1989000000>; + opp-microvolt = <1050000>; + required-opps = <&opp2_15>; + }; + }; + + cci_opp: opp-table-cci { + compatible = "operating-points-v2"; + opp-shared; + opp2_00: opp-273000000 { + opp-hz = /bits/ 64 <273000000>; + opp-microvolt = <650000>; + }; + opp2_01: opp-338000000 { + opp-hz = /bits/ 64 <338000000>; + opp-microvolt = <687500>; + }; + opp2_02: opp-403000000 { + opp-hz = /bits/ 64 <403000000>; + opp-microvolt = <718750>; + }; + opp2_03: opp-463000000 { + opp-hz = /bits/ 64 <463000000>; + opp-microvolt = <756250>; + }; + opp2_04: opp-546000000 { + opp-hz = /bits/ 64 <546000000>; + opp-microvolt = <800000>; + }; + opp2_05: opp-624000000 { + opp-hz = /bits/ 64 <624000000>; + opp-microvolt = <818750>; + }; + opp2_06: opp-689000000 { + opp-hz = /bits/ 64 <689000000>; + opp-microvolt = <850000>; + }; + opp2_07: opp-767000000 { + opp-hz = /bits/ 64 <767000000>; + opp-microvolt = <868750>; + }; + opp2_08: opp-845000000 { + opp-hz = /bits/ 64 <845000000>; + opp-microvolt = <893750>; + }; + opp2_09: opp-871000000 { + opp-hz = /bits/ 64 <871000000>; + opp-microvolt = <906250>; + }; + opp2_10: opp-923000000 { + opp-hz = /bits/ 64 <923000000>; + opp-microvolt = <931250>; + }; + opp2_11: opp-962000000 { + opp-hz = /bits/ 64 <962000000>; + opp-microvolt = <943750>; + }; + opp2_12: opp-1027000000 { + opp-hz = /bits/ 64 <1027000000>; + opp-microvolt = <975000>; + }; + opp2_13: opp-1092000000 { + opp-hz = /bits/ 64 <1092000000>; + opp-microvolt = <1000000>; + }; + opp2_14: opp-1144000000 { + opp-hz = /bits/ 64 <1144000000>; + opp-microvolt = <1025000>; + }; + opp2_15: opp-1196000000 { + opp-hz = /bits/ 64 <1196000000>; + opp-microvolt = <1050000>; + }; + }; + + cci: cci { + compatible = "mediatek,mt8183-cci"; + clocks = <&mcucfg CLK_MCU_BUS_SEL>, + <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>; + clock-names = "cci", "intermediate"; + operating-points-v2 = <&cci_opp>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -85,8 +331,13 @@ enable-method = "psci"; capacity-dmips-mhz = <741>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>; + clocks = <&mcucfg CLK_MCU_MP0_SEL>, + <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; dynamic-power-coefficient = <84>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; cpu1: cpu@1 { @@ -96,8 +347,13 @@ enable-method = "psci"; capacity-dmips-mhz = <741>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>; + clocks = <&mcucfg CLK_MCU_MP0_SEL>, + <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; dynamic-power-coefficient = <84>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; cpu2: cpu@2 { @@ -107,8 +363,13 @@ enable-method = "psci"; capacity-dmips-mhz = <741>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>; + clocks = <&mcucfg CLK_MCU_MP0_SEL>, + <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; dynamic-power-coefficient = <84>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; cpu3: cpu@3 { @@ -118,8 +379,13 @@ enable-method = "psci"; capacity-dmips-mhz = <741>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>; + clocks = <&mcucfg CLK_MCU_MP0_SEL>, + <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; dynamic-power-coefficient = <84>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; cpu4: cpu@100 { @@ -129,8 +395,13 @@ enable-method = "psci"; capacity-dmips-mhz = <1024>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>; + clocks = <&mcucfg CLK_MCU_MP2_SEL>, + <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster1_opp>; dynamic-power-coefficient = <211>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; cpu5: cpu@101 { @@ -140,8 +411,13 @@ enable-method = "psci"; capacity-dmips-mhz = <1024>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>; + clocks = <&mcucfg CLK_MCU_MP2_SEL>, + <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster1_opp>; dynamic-power-coefficient = <211>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; cpu6: cpu@102 { @@ -151,8 +427,13 @@ enable-method = "psci"; capacity-dmips-mhz = <1024>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>; + clocks = <&mcucfg CLK_MCU_MP2_SEL>, + <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster1_opp>; dynamic-power-coefficient = <211>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; cpu7: cpu@103 { @@ -162,8 +443,13 @@ enable-method = "psci"; capacity-dmips-mhz = <1024>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>; + clocks = <&mcucfg CLK_MCU_MP2_SEL>, + <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster1_opp>; dynamic-power-coefficient = <211>; #cooling-cells = <2>; + mediatek,cci = <&cci>; }; idle-states { @@ -295,8 +581,8 @@ }; psci { - compatible = "arm,psci-1.0"; - method = "smc"; + compatible = "arm,psci-1.0"; + method = "smc"; }; clk26m: oscillator { @@ -321,7 +607,7 @@ compatible = "simple-bus"; ranges; - soc_data: soc_data@8000000 { + soc_data: efuse@8000000 { compatible = "mediatek,mt8183-efuse", "mediatek,efuse"; reg = <0 0x08000000 0 0x0010>; @@ -502,9 +788,9 @@ #power-domain-cells = <0>; }; - power-domain@MT8183_POWER_DOMAIN_MFG_ASYNC { + mfg_async: power-domain@MT8183_POWER_DOMAIN_MFG_ASYNC { reg = <MT8183_POWER_DOMAIN_MFG_ASYNC>; - clocks = <&topckgen CLK_TOP_MUX_MFG>; + clocks = <&topckgen CLK_TOP_MUX_MFG>; clock-names = "mfg"; #address-cells = <1>; #size-cells = <0>; @@ -807,6 +1093,18 @@ status = "disabled"; }; + svs: svs@1100b000 { + compatible = "mediatek,mt8183-svs"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_THERM>; + clock-names = "main"; + nvmem-cells = <&svs_calibration>, + <&thermal_calibration>; + nvmem-cell-names = "svs-calibration-data", + "t-calibration-data"; + }; + thermal: thermal@1100b000 { #thermal-sensor-cells = <1>; compatible = "mediatek,mt8183-thermal"; @@ -1150,7 +1448,7 @@ }; ssusb: usb@11201000 { - compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3"; + compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3"; reg = <0 0x11201000 0 0x2e00>, <0 0x11203e00 0 0x0100>; reg-names = "mac", "ippc"; @@ -1325,6 +1623,10 @@ mipi_tx_calibration: calib@190 { reg = <0x190 0xc>; }; + + svs_calibration: calib@580 { + reg = <0x580 0x64>; + }; }; u3phy: t-phy@11f40000 { @@ -1508,6 +1810,7 @@ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; mediatek,gce-events = <CMDQ_EVENT_MUTEX_STREAM_DONE0>, <CMDQ_EVENT_MUTEX_STREAM_DONE1>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>; }; larb0: larb@14017000 { diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts new file mode 100644 index 000000000000..1e91491945f6 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2020 Google LLC + */ +/dts-v1/; +#include "mt8192-asurada.dtsi" + +/ { + model = "Google Hayato rev1"; + compatible = "google,hayato-rev1", "google,hayato", "mediatek,mt8192"; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_FORWARD) + MATRIX_KEY(0x02, 0x02, KEY_REFRESH) + MATRIX_KEY(0x01, 0x02, KEY_FULL_SCREEN) + MATRIX_KEY(0x03, 0x04, KEY_SCALE) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + + CROS_STD_MAIN_KEYMAP + >; +}; + +&touchscreen { + compatible = "hid-over-i2c"; + post-power-on-delay-ms = <10>; + hid-descr-addr = <0x0001>; + vdd-supply = <&pp3300_u>; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts new file mode 100644 index 000000000000..fa3d9573f37a --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2021 Google LLC + */ +/dts-v1/; +#include "mt8192-asurada.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + model = "Google Spherion (rev0 - 3)"; + compatible = "google,spherion-rev3", "google,spherion-rev2", + "google,spherion-rev1", "google,spherion-rev0", + "google,spherion", "mediatek,mt8192"; + + pwmleds { + compatible = "pwm-leds"; + + led { + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + pwms = <&cros_ec_pwm 0>; + max-brightness = <1023>; + }; + }; +}; + +&cros_ec_pwm { + status = "okay"; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_FULL_SCREEN) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + + CROS_STD_MAIN_KEYMAP + >; +}; + +&touchscreen { + compatible = "elan,ekth3500"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi new file mode 100644 index 000000000000..4b314435f8fd --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi @@ -0,0 +1,959 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2020 MediaTek Inc. + * Author: Seiya Wang <seiya.wang@mediatek.com> + */ +/dts-v1/; +#include "mt8192.dtsi" +#include "mt6359.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + /* system wide LDO 1.8V power rail */ + pp1800_ldo_g: regulator-1v8-g { + compatible = "regulator-fixed"; + regulator-name = "pp1800_ldo_g"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&pp3300_g>; + }; + + /* system wide switching 3.3V power rail */ + pp3300_g: regulator-3v3-g { + compatible = "regulator-fixed"; + regulator-name = "pp3300_g"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ppvar_sys>; + }; + + /* system wide LDO 3.3V power rail */ + pp3300_ldo_z: regulator-3v3-z { + compatible = "regulator-fixed"; + regulator-name = "pp3300_ldo_z"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ppvar_sys>; + }; + + /* separately switched 3.3V power rail */ + pp3300_u: regulator-3v3-u { + compatible = "regulator-fixed"; + regulator-name = "pp3300_u"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* enable pin wired to GPIO controlled by EC */ + vin-supply = <&pp3300_g>; + }; + + pp3300_wlan: regulator-3v3-wlan { + compatible = "regulator-fixed"; + regulator-name = "pp3300_wlan"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pp3300_wlan_pins>; + enable-active-high; + gpio = <&pio 143 GPIO_ACTIVE_HIGH>; + }; + + /* system wide switching 5.0V power rail */ + pp5000_a: regulator-5v0-a { + compatible = "regulator-fixed"; + regulator-name = "pp5000_a"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&ppvar_sys>; + }; + + /* system wide semi-regulated power rail from battery or USB */ + ppvar_sys: regulator-var-sys { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + scp_mem_reserved: scp@50000000 { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x2900000>; + no-map; + }; + + wifi_restricted_dma_region: wifi@c0000000 { + compatible = "restricted-dma-pool"; + reg = <0 0xc0000000 0 0x4000000>; + }; + }; +}; + +&i2c0 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + touchscreen: touchscreen@10 { + reg = <0x10>; + interrupts-extended = <&pio 21 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + }; +}; + +&i2c1 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; +}; + +&i2c2 { + status = "okay"; + + clock-frequency = <400000>; + clock-stretch-ns = <12600>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pins>; + vcc-supply = <&pp3300_u>; + wakeup-source; + }; +}; + +&i2c3 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + +&i2c7 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_pins>; +}; + +&mmc0 { + status = "okay"; + + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_default_pins>; + pinctrl-1 = <&mmc0_uhs_pins>; + bus-width = <8>; + max-frequency = <200000000>; + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; + vqmmc-supply = <&mt6359_vufs_ldo_reg>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + supports-cqe; + cap-mmc-hw-reset; + mmc-hs400-enhanced-strobe; + hs400-ds-delay = <0x12814>; + no-sdio; + no-sd; + non-removable; +}; + +&mmc1 { + status = "okay"; + + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_default_pins>; + pinctrl-1 = <&mmc1_uhs_pins>; + bus-width = <4>; + max-frequency = <200000000>; + cd-gpios = <&pio 17 GPIO_ACTIVE_LOW>; + vmmc-supply = <&mt6360_ldo5_reg>; + vqmmc-supply = <&mt6360_ldo3_reg>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + no-sdio; + no-mmc; +}; + +/* for CORE */ +&mt6359_vgpu11_buck_reg { + regulator-always-on; +}; + +&mt6359_vgpu11_sshub_buck_reg { + regulator-always-on; + regulator-min-microvolt = <575000>; + regulator-max-microvolt = <575000>; +}; + +&mt6359_vrf12_ldo_reg { + regulator-always-on; +}; + +&mt6359_vufs_ldo_reg { + regulator-always-on; +}; + +&mt6359codec { + mediatek,dmic-mode = <1>; /* one-wire */ + mediatek,mic-type-0 = <2>; /* DMIC */ + mediatek,mic-type-2 = <2>; /* DMIC */ +}; + +&nor_flash { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&nor_flash_pins>; + assigned-clocks = <&topckgen CLK_TOP_SFLASH_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6_D8>; + + flash@0 { + compatible = "winbond,w25q64jwm", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <2>; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + + pcie0: pcie@0,0 { + device_type = "pci"; + reg = <0x0000 0 0 0 0>; + num-lanes = <1>; + bus-range = <0x1 0x1>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi: wifi@0,0 { + reg = <0x10000 0 0 0 0x100000>, + <0x10000 0 0x100000 0 0x100000>; + memory-region = <&wifi_restricted_dma_region>; + }; + }; +}; + +&pio { + /* 220 lines */ + gpio-line-names = "I2S_DP_LRCK", + "IS_DP_BCLK", + "I2S_DP_MCLK", + "I2S_DP_DATAOUT", + "SAR0_INT_ODL", + "EC_AP_INT_ODL", + "EDPBRDG_INT_ODL", + "DPBRDG_INT_ODL", + "DPBRDG_PWREN", + "DPBRDG_RST_ODL", + "I2S_HP_MCLK", + "I2S_HP_BCK", + "I2S_HP_LRCK", + "I2S_HP_DATAIN", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it AP_FLASH_WP_ODL. + */ + "AP_FLASH_WP_L", + "TRACKPAD_INT_ODL", + "EC_AP_HPD_OD", + "SD_CD_ODL", + "HP_INT_ODL_ALC", + "EN_PP1000_DPBRDG", + "AP_GPIO20", + "TOUCH_INT_L_1V8", + "UART_BT_WAKE_ODL", + "AP_GPIO23", + "AP_SPI_FLASH_CS_L", + "AP_SPI_FLASH_CLK", + "EN_PP3300_DPBRDG_DX", + "AP_SPI_FLASH_MOSI", + "AP_SPI_FLASH_MISO", + "I2S_HP_DATAOUT", + "AP_GPIO30", + "I2S_SPKR_MCLK", + "I2S_SPKR_BCLK", + "I2S_SPKR_LRCK", + "I2S_SPKR_DATAIN", + "I2S_SPKR_DATAOUT", + "AP_SPI_H1_TPM_CLK", + "AP_SPI_H1_TPM_CS_L", + "AP_SPI_H1_TPM_MISO", + "AP_SPI_H1_TPM_MOSI", + "BL_PWM", + "EDPBRDG_PWREN", + "EDPBRDG_RST_ODL", + "EN_PP3300_HUB", + "HUB_RST_L", + "", + "", + "", + "", + "", + "", + "SD_CLK", + "SD_CMD", + "SD_DATA3", + "SD_DATA0", + "SD_DATA2", + "SD_DATA1", + "", + "", + "", + "", + "", + "", + "PCIE_WAKE_ODL", + "PCIE_RST_L", + "PCIE_CLKREQ_ODL", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SPMI_SCL", + "SPMI_SDA", + "AP_GOOD", + "UART_DBG_TX_AP_RX", + "UART_AP_TX_DBG_RX", + "UART_AP_TX_BT_RX", + "UART_BT_TX_AP_RX", + "MIPI_DPI_D0_R", + "MIPI_DPI_D1_R", + "MIPI_DPI_D2_R", + "MIPI_DPI_D3_R", + "MIPI_DPI_D4_R", + "MIPI_DPI_D5_R", + "MIPI_DPI_D6_R", + "MIPI_DPI_D7_R", + "MIPI_DPI_D8_R", + "MIPI_DPI_D9_R", + "MIPI_DPI_D10_R", + "", + "", + "MIPI_DPI_DE_R", + "MIPI_DPI_D11_R", + "MIPI_DPI_VSYNC_R", + "MIPI_DPI_CLK_R", + "MIPI_DPI_HSYNC_R", + "PCM_BT_DATAIN", + "PCM_BT_SYNC", + "PCM_BT_DATAOUT", + "PCM_BT_CLK", + "AP_I2C_AUDIO_SCL", + "AP_I2C_AUDIO_SDA", + "SCP_I2C_SCL", + "SCP_I2C_SDA", + "AP_I2C_WLAN_SCL", + "AP_I2C_WLAN_SDA", + "AP_I2C_DPBRDG_SCL", + "AP_I2C_DPBRDG_SDA", + "EN_PP1800_DPBRDG_DX", + "EN_PP3300_EDP_DX", + "EN_PP1800_EDPBRDG_DX", + "EN_PP1000_EDPBRDG", + "SCP_JTAG0_TDO", + "SCP_JTAG0_TDI", + "SCP_JTAG0_TMS", + "SCP_JTAG0_TCK", + "SCP_JTAG0_TRSTN", + "EN_PP3000_VMC_PMU", + "EN_PP3300_DISPLAY_DX", + "TOUCH_RST_L_1V8", + "TOUCH_REPORT_DISABLE", + "", + "", + "AP_I2C_TRACKPAD_SCL_1V8", + "AP_I2C_TRACKPAD_SDA_1V8", + "EN_PP3300_WLAN", + "BT_KILL_L", + "WIFI_KILL_L", + "SET_VMC_VOLT_AT_1V8", + "EN_SPK", + "AP_WARM_RST_REQ", + "", + "", + "EN_PP3000_SD_S3", + "AP_EDP_BKLTEN", + "", + "", + "", + "AP_SPI_EC_CLK", + "AP_SPI_EC_CS_L", + "AP_SPI_EC_MISO", + "AP_SPI_EC_MOSI", + "AP_I2C_EDPBRDG_SCL", + "AP_I2C_EDPBRDG_SDA", + "MT6315_PROC_INT", + "MT6315_GPU_INT", + "UART_SERVO_TX_SCP_RX", + "UART_SCP_TX_SERVO_RX", + "BT_RTS_AP_CTS", + "AP_RTS_BT_CTS", + "UART_AP_WAKE_BT_ODL", + "WLAN_ALERT_ODL", + "EC_IN_RW_ODL", + "H1_AP_INT_ODL", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "MSDC0_CMD", + "MSDC0_DAT0", + "MSDC0_DAT2", + "MSDC0_DAT4", + "MSDC0_DAT6", + "MSDC0_DAT1", + "MSDC0_DAT5", + "MSDC0_DAT7", + "MSDC0_DSL", + "MSDC0_CLK", + "MSDC0_DAT3", + "MSDC0_RST_L", + "SCP_VREQ_VAO", + "AUD_DAT_MOSI2", + "AUD_NLE_MOSI1", + "AUD_NLE_MOSI0", + "AUD_DAT_MISO2", + "AP_I2C_SAR_SDA", + "AP_I2C_SAR_SCL", + "AP_I2C_PWR_SCL", + "AP_I2C_PWR_SDA", + "AP_I2C_TS_SCL_1V8", + "AP_I2C_TS_SDA_1V8", + "SRCLKENA0", + "SRCLKENA1", + "AP_EC_WATCHDOG_L", + "PWRAP_SPI0_MI", + "PWRAP_SPI0_CSN", + "PWRAP_SPI0_MO", + "PWRAP_SPI0_CK", + "AP_RTC_CLK32K", + "AUD_CLK_MOSI", + "AUD_SYNC_MOSI", + "AUD_DAT_MOSI0", + "AUD_DAT_MOSI1", + "AUD_DAT_MISO0", + "AUD_DAT_MISO1"; + + cr50_int: cr50-irq-default-pins { + pins-gsc-ap-int-odl { + pinmux = <PINMUX_GPIO171__FUNC_GPIO171>; + input-enable; + }; + }; + + cros_ec_int: cros-ec-irq-default-pins { + pins-ec-ap-int-odl { + pinmux = <PINMUX_GPIO5__FUNC_GPIO5>; + input-enable; + bias-pull-up; + }; + }; + + i2c0_pins: i2c0-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO204__FUNC_SCL0>, + <PINMUX_GPIO205__FUNC_SDA0>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + i2c1_pins: i2c1-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO118__FUNC_SCL1>, + <PINMUX_GPIO119__FUNC_SDA1>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + i2c2_pins: i2c2-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO141__FUNC_SCL2>, + <PINMUX_GPIO142__FUNC_SDA2>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + i2c3_pins: i2c3-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO160__FUNC_SCL3>, + <PINMUX_GPIO161__FUNC_SDA3>; + bias-disable; + drive-strength-microamp = <1000>; + }; + }; + + i2c7_pins: i2c7-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO124__FUNC_SCL7>, + <PINMUX_GPIO125__FUNC_SDA7>; + bias-disable; + drive-strength-microamp = <1000>; + }; + }; + + mmc0_default_pins: mmc0-default-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO184__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO188__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO185__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO193__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO186__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO189__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO187__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO190__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO183__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO192__FUNC_MSDC0_CLK>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO194__FUNC_MSDC0_RSTB>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc0_uhs_pins: mmc0-uhs-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO184__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO188__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO185__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO193__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO186__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO189__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO187__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO190__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO183__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <10>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO192__FUNC_MSDC0_CLK>; + drive-strength = <10>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO194__FUNC_MSDC0_RSTB>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-ds { + pinmux = <PINMUX_GPIO191__FUNC_MSDC0_DSL>; + drive-strength = <10>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + }; + + mmc1_default_pins: mmc1-default-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO54__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO56__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO55__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO53__FUNC_MSDC1_DAT3>, + <PINMUX_GPIO52__FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO51__FUNC_MSDC1_CLK>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-insert { + pinmux = <PINMUX_GPIO17__FUNC_GPIO17>; + input-enable; + bias-pull-up; + }; + }; + + mmc1_uhs_pins: mmc1-uhs-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO54__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO56__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO55__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO53__FUNC_MSDC1_DAT3>, + <PINMUX_GPIO52__FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO51__FUNC_MSDC1_CLK>; + input-enable; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + }; + + nor_flash_pins: nor-flash-default-pins { + pins-cs-io1 { + pinmux = <PINMUX_GPIO24__FUNC_SPINOR_CS>, + <PINMUX_GPIO28__FUNC_SPINOR_IO1>; + input-enable; + bias-pull-up; + drive-strength = <10>; + }; + + pins-io0 { + pinmux = <PINMUX_GPIO27__FUNC_SPINOR_IO0>; + bias-pull-up; + drive-strength = <10>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO25__FUNC_SPINOR_CK>; + input-enable; + bias-pull-up; + drive-strength = <10>; + }; + }; + + pcie_pins: pcie-default-pins { + pins-pcie-wake { + pinmux = <PINMUX_GPIO63__FUNC_PCIE_WAKE_N>; + bias-pull-up; + }; + + pins-pcie-pereset { + pinmux = <PINMUX_GPIO64__FUNC_PCIE_PERESET_N>; + }; + + pins-pcie-clkreq { + pinmux = <PINMUX_GPIO65__FUNC_PCIE_CLKREQ_N>; + bias-pull-up; + }; + + pins-wifi-kill { + pinmux = <PINMUX_GPIO145__FUNC_GPIO145>; /* WIFI_KILL_L */ + output-high; + }; + }; + + pp3300_wlan_pins: pp3300-wlan-pins { + pins-pcie-en-pp3300-wlan { + pinmux = <PINMUX_GPIO143__FUNC_GPIO143>; + output-high; + }; + }; + + scp_pins: scp-pins { + pins-vreq-vao { + pinmux = <PINMUX_GPIO195__FUNC_SCP_VREQ_VAO>; + }; + }; + + spi1_pins: spi1-default-pins { + pins-cs-mosi-clk { + pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>, + <PINMUX_GPIO159__FUNC_SPI1_A_MO>, + <PINMUX_GPIO156__FUNC_SPI1_A_CLK>; + bias-disable; + }; + + pins-miso { + pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>; + bias-pull-down; + }; + }; + + spi5_pins: spi5-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO38__FUNC_SPI5_A_MI>, + <PINMUX_GPIO37__FUNC_GPIO37>, + <PINMUX_GPIO39__FUNC_SPI5_A_MO>, + <PINMUX_GPIO36__FUNC_SPI5_A_CLK>; + bias-disable; + }; + }; + + trackpad_pins: trackpad-default-pins { + pins-int-n { + pinmux = <PINMUX_GPIO15__FUNC_GPIO15>; + input-enable; + bias-pull-up = <MTK_PUPD_SET_R1R0_11>; + }; + }; + + touchscreen_pins: touchscreen-default-pins { + pins-irq { + pinmux = <PINMUX_GPIO21__FUNC_GPIO21>; + input-enable; + bias-pull-up; + }; + + pins-reset { + pinmux = <PINMUX_GPIO137__FUNC_GPIO137>; + output-high; + }; + + pins-report-sw { + pinmux = <PINMUX_GPIO138__FUNC_GPIO138>; + output-low; + }; + }; +}; + +&pmic { + interrupts-extended = <&pio 214 IRQ_TYPE_LEVEL_HIGH>; +}; + +&scp { + status = "okay"; + + firmware-name = "mediatek/mt8192/scp.img"; + memory-region = <&scp_mem_reserved>; + pinctrl-names = "default"; + pinctrl-0 = <&scp_pins>; + + cros-ec { + compatible = "google,cros-ec-rpmsg"; + mediatek,rpmsg-name = "cros-ec-rpmsg"; + }; +}; + +&spi1 { + status = "okay"; + + mediatek,pad-select = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupts-extended = <&pio 5 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <3000000>; + pinctrl-names = "default"; + pinctrl-0 = <&cros_ec_int>; + + #address-cells = <1>; + #size-cells = <0>; + + base_detection: cbas { + compatible = "google,cros-cbas"; + }; + + cros_ec_pwm: pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + + status = "disabled"; + }; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mt6360_ldo3_reg: regulator@0 { + compatible = "google,cros-ec-regulator"; + reg = <0>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + mt6360_ldo5_reg: regulator@1 { + compatible = "google,cros-ec-regulator"; + reg = <1>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + typec { + compatible = "google,cros-ec-typec"; + #address-cells = <1>; + #size-cells = <0>; + + usb_c0: connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + label = "left"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + + usb_c1: connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + label = "right"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + }; + }; +}; + +&spi5 { + status = "okay"; + + cs-gpios = <&pio 37 GPIO_ACTIVE_LOW>; + mediatek,pad-select = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi5_pins>; + + cr50@0 { + compatible = "google,cr50"; + reg = <0>; + interrupts-extended = <&pio 171 IRQ_TYPE_EDGE_RISING>; + spi-max-frequency = <1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&cr50_int>; + }; +}; + +&spmi { + #address-cells = <2>; + #size-cells = <0>; + + mt6315_6: pmic@6 { + compatible = "mediatek,mt6315-regulator"; + reg = <0x6 SPMI_USID>; + + regulators { + mt6315_6_vbuck1: vbuck1 { + regulator-compatible = "vbuck1"; + regulator-name = "Vbcpu"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2>; + regulator-always-on; + }; + + mt6315_6_vbuck3: vbuck3 { + regulator-compatible = "vbuck3"; + regulator-name = "Vlcpu"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2>; + regulator-always-on; + }; + }; + }; + + mt6315_7: pmic@7 { + compatible = "mediatek,mt6315-regulator"; + reg = <0x7 SPMI_USID>; + + regulators { + mt6315_7_vbuck1: vbuck1 { + regulator-compatible = "vbuck1"; + regulator-name = "Vgpu"; + regulator-min-microvolt = <606250>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2>; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&xhci { + status = "okay"; + + wakeup-source; + vusb33-supply = <&pp3300_g>; + vbus-supply = <&pp5000_a>; +}; + +#include <arm/cros-ec-keyboard.dtsi> +#include <arm/cros-ec-sbs.dtsi> diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index 733aec2e7f77..cbae5a5ee4a0 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -43,7 +43,7 @@ reg = <0x000>; enable-method = "psci"; clock-frequency = <1701000000>; - cpu-idle-states = <&cpuoff_l &clusteroff_l>; + cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; }; @@ -54,7 +54,7 @@ reg = <0x100>; enable-method = "psci"; clock-frequency = <1701000000>; - cpu-idle-states = <&cpuoff_l &clusteroff_l>; + cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; }; @@ -65,7 +65,7 @@ reg = <0x200>; enable-method = "psci"; clock-frequency = <1701000000>; - cpu-idle-states = <&cpuoff_l &clusteroff_l>; + cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; }; @@ -76,7 +76,7 @@ reg = <0x300>; enable-method = "psci"; clock-frequency = <1701000000>; - cpu-idle-states = <&cpuoff_l &clusteroff_l>; + cpu-idle-states = <&cpu_sleep_l &cluster_sleep_l>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <530>; }; @@ -87,7 +87,7 @@ reg = <0x400>; enable-method = "psci"; clock-frequency = <2171000000>; - cpu-idle-states = <&cpuoff_b &clusteroff_b>; + cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; }; @@ -98,7 +98,7 @@ reg = <0x500>; enable-method = "psci"; clock-frequency = <2171000000>; - cpu-idle-states = <&cpuoff_b &clusteroff_b>; + cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; }; @@ -109,7 +109,7 @@ reg = <0x600>; enable-method = "psci"; clock-frequency = <2171000000>; - cpu-idle-states = <&cpuoff_b &clusteroff_b>; + cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; }; @@ -120,7 +120,7 @@ reg = <0x700>; enable-method = "psci"; clock-frequency = <2171000000>; - cpu-idle-states = <&cpuoff_b &clusteroff_b>; + cpu-idle-states = <&cpu_sleep_b &cluster_sleep_b>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; }; @@ -172,8 +172,8 @@ }; idle-states { - entry-method = "arm,psci"; - cpuoff_l: cpuoff_l { + entry-method = "psci"; + cpu_sleep_l: cpu-sleep-l { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x00010001>; local-timer-stop; @@ -181,7 +181,7 @@ exit-latency-us = <140>; min-residency-us = <780>; }; - cpuoff_b: cpuoff_b { + cpu_sleep_b: cpu-sleep-b { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x00010001>; local-timer-stop; @@ -189,7 +189,7 @@ exit-latency-us = <145>; min-residency-us = <720>; }; - clusteroff_l: clusteroff_l { + cluster_sleep_l: cluster-sleep-l { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x01010002>; local-timer-stop; @@ -197,7 +197,7 @@ exit-latency-us = <155>; min-residency-us = <860>; }; - clusteroff_b: clusteroff_b { + cluster_sleep_b: cluster-sleep-b { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x01010002>; local-timer-stop; @@ -271,6 +271,7 @@ compatible = "mediatek,mt8192-infracfg", "syscon"; reg = <0 0x10001000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; pericfg: syscon@10003000 { @@ -911,7 +912,7 @@ }; efuse: efuse@11c10000 { - compatible = "mediatek,efuse"; + compatible = "mediatek,mt8192-efuse", "mediatek,efuse"; reg = <0 0x11c10000 0 0x1000>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts new file mode 100644 index 000000000000..3348ba69ff6c --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2021 MediaTek Inc. + */ +/dts-v1/; +#include "mt8195-cherry.dtsi" + +/ { + model = "Acer Tomato (rev1) board"; + compatible = "google,tomato-rev1", "google,tomato", "mediatek,mt8195"; +}; + +&ts_10 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts new file mode 100644 index 000000000000..4669e9d917f8 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2021 MediaTek Inc. + */ +/dts-v1/; +#include "mt8195-cherry.dtsi" + +/ { + model = "Acer Tomato (rev2) board"; + compatible = "google,tomato-rev2", "google,tomato", "mediatek,mt8195"; +}; + +&pio_default { + pins-low-power-hdmi-disable { + pinmux = <PINMUX_GPIO31__FUNC_GPIO31>, + <PINMUX_GPIO32__FUNC_GPIO32>, + <PINMUX_GPIO33__FUNC_GPIO33>, + <PINMUX_GPIO34__FUNC_GPIO34>, + <PINMUX_GPIO35__FUNC_GPIO35>; + input-enable; + bias-pull-down; + }; + + pins-low-power-pcie0-disable { + pinmux = <PINMUX_GPIO19__FUNC_GPIO19>, + <PINMUX_GPIO20__FUNC_GPIO20>, + <PINMUX_GPIO21__FUNC_GPIO21>; + input-enable; + bias-pull-down; + }; +}; + +&ts_10 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts new file mode 100644 index 000000000000..5021edd02f7c --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2021 MediaTek Inc. + */ +/dts-v1/; +#include "mt8195-cherry.dtsi" + +/ { + model = "Acer Tomato (rev3 - 4) board"; + compatible = "google,tomato-rev4", "google,tomato-rev3", + "google,tomato", "mediatek,mt8195"; +}; + +&pio_default { + pins-low-power-hdmi-disable { + pinmux = <PINMUX_GPIO31__FUNC_GPIO31>, + <PINMUX_GPIO32__FUNC_GPIO32>, + <PINMUX_GPIO33__FUNC_GPIO33>, + <PINMUX_GPIO34__FUNC_GPIO34>, + <PINMUX_GPIO35__FUNC_GPIO35>; + input-enable; + bias-pull-down; + }; + + pins-low-power-pcie0-disable { + pinmux = <PINMUX_GPIO19__FUNC_GPIO19>, + <PINMUX_GPIO20__FUNC_GPIO20>, + <PINMUX_GPIO21__FUNC_GPIO21>; + input-enable; + bias-pull-down; + }; +}; + +&ts_10 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi new file mode 100644 index 000000000000..fcc600674339 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -0,0 +1,702 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2021 MediaTek Inc. + */ + +#include <dt-bindings/gpio/gpio.h> +#include "mt8195.dtsi" +#include "mt6359.dtsi" + +/ { + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c7 = &i2c7; + mmc0 = &mmc0; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + /* system wide LDO 3.3V power rail */ + pp3300_z5: regulator-pp3300-ldo-z5 { + compatible = "regulator-fixed"; + regulator-name = "pp3300_ldo_z5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ppvar_sys>; + }; + + /* separately switched 3.3V power rail */ + pp3300_s3: regulator-pp3300-s3 { + compatible = "regulator-fixed"; + regulator-name = "pp3300_s3"; + /* automatically sequenced by PMIC EXT_PMIC_EN2 */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&pp3300_z2>; + }; + + /* system wide 3.3V power rail */ + pp3300_z2: regulator-pp3300-z2 { + compatible = "regulator-fixed"; + regulator-name = "pp3300_z2"; + /* EN pin tied to pp4200_z2, which is controlled by EC */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ppvar_sys>; + }; + + /* system wide 4.2V power rail */ + pp4200_z2: regulator-pp4200-z2 { + compatible = "regulator-fixed"; + regulator-name = "pp4200_z2"; + /* controlled by EC */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + vin-supply = <&ppvar_sys>; + }; + + /* system wide switching 5.0V power rail */ + pp5000_s5: regulator-pp5000-s5 { + compatible = "regulator-fixed"; + regulator-name = "pp5000_s5"; + /* controlled by EC */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&ppvar_sys>; + }; + + /* system wide semi-regulated power rail from battery or USB */ + ppvar_sys: regulator-ppvar-sys { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + usb_vbus: regulator-5v0-usb-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + }; +}; + +&i2c0 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; +}; + +&i2c1 { + status = "okay"; + + clock-frequency = <400000>; + i2c-scl-internal-delay-ns = <12500>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; +}; + +&i2c2 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; +}; + +&i2c3 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + +&i2c4 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + + ts_10: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + hid-descr-addr = <0x0001>; + interrupts-extended = <&pio 92 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + post-power-on-delay-ms = <10>; + vdd-supply = <&pp3300_s3>; + status = "disabled"; + }; +}; + +&i2c5 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; +}; + +&i2c7 { + status = "okay"; + + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_pins>; + + pmic@34 { + #interrupt-cells = <1>; + compatible = "mediatek,mt6360"; + reg = <0x34>; + interrupt-controller; + interrupts-extended = <&pio 130 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "IRQB"; + pinctrl-names = "default"; + pinctrl-0 = <&subpmic_default>; + wakeup-source; + }; +}; + +&mmc0 { + status = "okay"; + + bus-width = <8>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + hs400-ds-delay = <0x14c11>; + max-frequency = <200000000>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + no-sdio; + no-sd; + non-removable; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; + vqmmc-supply = <&mt6359_vufs_ldo_reg>; +}; + +/* for CPU-L */ +&mt6359_vcore_buck_reg { + regulator-always-on; +}; + +/* for CORE */ +&mt6359_vgpu11_buck_reg { + regulator-always-on; +}; + +&mt6359_vgpu11_sshub_buck_reg { + regulator-always-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <550000>; +}; + +/* for CORE SRAM */ +&mt6359_vpu_buck_reg { + regulator-always-on; +}; + +&mt6359_vrf12_ldo_reg { + regulator-always-on; +}; + +/* for GPU SRAM */ +&mt6359_vsram_others_ldo_reg { + regulator-always-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; +}; + +&mt6359_vufs_ldo_reg { + regulator-always-on; +}; + +&nor_flash { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&nor_pins_default>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <2>; + }; +}; + +&pio { + mediatek,rsel-resistance-in-si-unit; + pinctrl-names = "default"; + pinctrl-0 = <&pio_default>; + + /* 144 lines */ + gpio-line-names = + "I2S_SPKR_MCLK", + "I2S_SPKR_DATAIN", + "I2S_SPKR_LRCK", + "I2S_SPKR_BCLK", + "EC_AP_INT_ODL", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it AP_FLASH_WP_ODL. + */ + "AP_FLASH_WP_L", + "TCHPAD_INT_ODL", + "EDP_HPD_1V8", + "AP_I2C_CAM_SDA", + "AP_I2C_CAM_SCL", + "AP_I2C_TCHPAD_SDA_1V8", + "AP_I2C_TCHPAD_SCL_1V8", + "AP_I2C_AUD_SDA", + "AP_I2C_AUD_SCL", + "AP_I2C_TPM_SDA_1V8", + "AP_I2C_TPM_SCL_1V8", + "AP_I2C_TCHSCR_SDA_1V8", + "AP_I2C_TCHSCR_SCL_1V8", + "EC_AP_HPD_OD", + "", + "PCIE_NVME_RST_L", + "PCIE_NVME_CLKREQ_ODL", + "PCIE_RST_1V8_L", + "PCIE_CLKREQ_1V8_ODL", + "PCIE_WAKE_1V8_ODL", + "CLK_24M_CAM0", + "CAM1_SEN_EN", + "AP_I2C_PWR_SCL_1V8", + "AP_I2C_PWR_SDA_1V8", + "AP_I2C_MISC_SCL", + "AP_I2C_MISC_SDA", + "EN_PP5000_HDMI_X", + "AP_HDMITX_HTPLG", + "", + "AP_HDMITX_SCL_1V8", + "AP_HDMITX_SDA_1V8", + "AP_RTC_CLK32K", + "AP_EC_WATCHDOG_L", + "SRCLKENA0", + "SRCLKENA1", + "PWRAP_SPI0_CS_L", + "PWRAP_SPI0_CK", + "PWRAP_SPI0_MOSI", + "PWRAP_SPI0_MISO", + "SPMI_SCL", + "SPMI_SDA", + "", + "", + "", + "I2S_HP_DATAIN", + "I2S_HP_MCLK", + "I2S_HP_BCK", + "I2S_HP_LRCK", + "I2S_HP_DATAOUT", + "SD_CD_ODL", + "EN_PP3300_DISP_X", + "TCHSCR_RST_1V8_L", + "TCHSCR_REPORT_DISABLE", + "EN_PP3300_WLAN_X", + "BT_KILL_1V8_L", + "I2S_SPKR_DATAOUT", + "WIFI_KILL_1V8_L", + "BEEP_ON", + "SCP_I2C_SENSOR_SCL_1V8", + "SCP_I2C_SENSOR_SDA_1V8", + "", + "", + "", + "", + "AUD_CLK_MOSI", + "AUD_SYNC_MOSI", + "AUD_DAT_MOSI0", + "AUD_DAT_MOSI1", + "AUD_DAT_MISO0", + "AUD_DAT_MISO1", + "AUD_DAT_MISO2", + "SCP_VREQ_VAO", + "AP_SPI_GSC_TPM_CLK", + "AP_SPI_GSC_TPM_MOSI", + "AP_SPI_GSC_TPM_CS_L", + "AP_SPI_GSC_TPM_MISO", + "EN_PP1000_CAM_X", + "AP_EDP_BKLTEN", + "", + "USB3_HUB_RST_L", + "", + "WLAN_ALERT_ODL", + "EC_IN_RW_ODL", + "GSC_AP_INT_ODL", + "HP_INT_ODL", + "CAM0_RST_L", + "CAM1_RST_L", + "TCHSCR_INT_1V8_L", + "CAM1_DET_L", + "RST_ALC1011_L", + "", + "", + "BL_PWM_1V8", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "EN_SPKR", + "AP_EC_WARM_RST_REQ", + "UART_SCP_TX_DBGCON_RX", + "UART_DBGCON_TX_SCP_RX", + "", + "", + "KPCOL0", + "", + "MT6315_GPU_INT", + "MT6315_PROC_BC_INT", + "SD_CMD", + "SD_CLK", + "SD_DAT0", + "SD_DAT1", + "SD_DAT2", + "SD_DAT3", + "EMMC_DAT7", + "EMMC_DAT6", + "EMMC_DAT5", + "EMMC_DAT4", + "EMMC_RSTB", + "EMMC_CMD", + "EMMC_CLK", + "EMMC_DAT3", + "EMMC_DAT2", + "EMMC_DAT1", + "EMMC_DAT0", + "EMMC_DSL", + "", + "", + "MT6360_INT_ODL", + "SCP_JTAG0_TRSTN", + "AP_SPI_EC_CS_L", + "AP_SPI_EC_CLK", + "AP_SPI_EC_MOSI", + "AP_SPI_EC_MISO", + "SCP_JTAG0_TMS", + "SCP_JTAG0_TCK", + "SCP_JTAG0_TDO", + "SCP_JTAG0_TDI", + "AP_SPI_FLASH_CS_L", + "AP_SPI_FLASH_CLK", + "AP_SPI_FLASH_MOSI", + "AP_SPI_FLASH_MISO"; + + i2c0_pins: i2c0-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>, + <PINMUX_GPIO9__FUNC_SCL0>; + bias-disable; + drive-strength-microamp = <1000>; + }; + }; + + i2c1_pins: i2c1-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO10__FUNC_SDA1>, + <PINMUX_GPIO11__FUNC_SCL1>; + bias-pull-up = <1000>; + drive-strength-microamp = <1000>; + }; + }; + + i2c2_pins: i2c2-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO12__FUNC_SDA2>, + <PINMUX_GPIO13__FUNC_SCL2>; + bias-disable; + drive-strength-microamp = <1000>; + }; + }; + + i2c3_pins: i2c3-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO14__FUNC_SDA3>, + <PINMUX_GPIO15__FUNC_SCL3>; + bias-pull-up = <1000>; + drive-strength-microamp = <1000>; + }; + }; + + i2c4_pins: i2c4-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO16__FUNC_SDA4>, + <PINMUX_GPIO17__FUNC_SCL4>; + bias-pull-up = <1000>; + drive-strength = <4>; + }; + }; + + i2c5_pins: i2c5-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO29__FUNC_SCL5>, + <PINMUX_GPIO30__FUNC_SDA5>; + bias-disable; + drive-strength-microamp = <1000>; + }; + }; + + i2c7_pins: i2c7-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO27__FUNC_SCL7>, + <PINMUX_GPIO28__FUNC_SDA7>; + bias-disable; + }; + }; + + mmc0_pins_default: mmc0-default-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO121__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc0_pins_uhs: mmc0-uhs-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO121__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-ds { + pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + nor_pins_default: nor-default-pins { + pins-ck-io { + pinmux = <PINMUX_GPIO142__FUNC_SPINOR_IO0>, + <PINMUX_GPIO141__FUNC_SPINOR_CK>, + <PINMUX_GPIO143__FUNC_SPINOR_IO1>; + drive-strength = <6>; + bias-pull-down; + }; + + pins-cs { + pinmux = <PINMUX_GPIO140__FUNC_SPINOR_CS>; + drive-strength = <6>; + bias-pull-up; + }; + }; + + pio_default: pio-default-pins { + pins-wifi-enable { + pinmux = <PINMUX_GPIO58__FUNC_GPIO58>; + output-high; + drive-strength = <14>; + }; + + pins-low-power-pd { + pinmux = <PINMUX_GPIO25__FUNC_GPIO25>, + <PINMUX_GPIO26__FUNC_GPIO26>, + <PINMUX_GPIO46__FUNC_GPIO46>, + <PINMUX_GPIO47__FUNC_GPIO47>, + <PINMUX_GPIO48__FUNC_GPIO48>, + <PINMUX_GPIO65__FUNC_GPIO65>, + <PINMUX_GPIO66__FUNC_GPIO66>, + <PINMUX_GPIO67__FUNC_GPIO67>, + <PINMUX_GPIO68__FUNC_GPIO68>, + <PINMUX_GPIO128__FUNC_GPIO128>, + <PINMUX_GPIO129__FUNC_GPIO129>; + input-enable; + bias-pull-down; + }; + + pins-low-power-pupd { + pinmux = <PINMUX_GPIO77__FUNC_GPIO77>, + <PINMUX_GPIO78__FUNC_GPIO78>, + <PINMUX_GPIO79__FUNC_GPIO79>, + <PINMUX_GPIO80__FUNC_GPIO80>, + <PINMUX_GPIO83__FUNC_GPIO83>, + <PINMUX_GPIO85__FUNC_GPIO85>, + <PINMUX_GPIO90__FUNC_GPIO90>, + <PINMUX_GPIO91__FUNC_GPIO91>, + <PINMUX_GPIO93__FUNC_GPIO93>, + <PINMUX_GPIO94__FUNC_GPIO94>, + <PINMUX_GPIO95__FUNC_GPIO95>, + <PINMUX_GPIO96__FUNC_GPIO96>, + <PINMUX_GPIO104__FUNC_GPIO104>, + <PINMUX_GPIO105__FUNC_GPIO105>, + <PINMUX_GPIO107__FUNC_GPIO107>; + input-enable; + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + spi0_pins: spi0-default-pins { + pins-cs-mosi-clk { + pinmux = <PINMUX_GPIO132__FUNC_SPIM0_CSB>, + <PINMUX_GPIO134__FUNC_SPIM0_MO>, + <PINMUX_GPIO133__FUNC_SPIM0_CLK>; + bias-disable; + }; + + pins-miso { + pinmux = <PINMUX_GPIO135__FUNC_SPIM0_MI>; + bias-pull-down; + }; + }; + + subpmic_default: subpmic-default-pins { + subpmic_pin_irq: pins-subpmic-int-n { + pinmux = <PINMUX_GPIO130__FUNC_GPIO130>; + input-enable; + bias-pull-up; + }; + }; + + touchscreen_pins: touchscreen-default-pins { + pins-int-n { + pinmux = <PINMUX_GPIO92__FUNC_GPIO92>; + input-enable; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + pins-rst { + pinmux = <PINMUX_GPIO56__FUNC_GPIO56>; + output-high; + }; + pins-report-sw { + pinmux = <PINMUX_GPIO57__FUNC_GPIO57>; + output-low; + }; + }; +}; + +&pmic { + interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; +}; + +&spi0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + mediatek,pad-select = <0>; +}; + +&u3phy0 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; + +&u3phy2 { + status = "okay"; +}; + +&u3phy3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&xhci0 { + status = "okay"; + + vusb33-supply = <&mt6359_vusb_ldo_reg>; + vbus-supply = <&usb_vbus>; +}; + +&xhci1 { + status = "okay"; + + vusb33-supply = <&mt6359_vusb_ldo_reg>; + vbus-supply = <&usb_vbus>; +}; + +&xhci2 { + status = "okay"; + + vusb33-supply = <&mt6359_vusb_ldo_reg>; + vbus-supply = <&usb_vbus>; +}; + +&xhci3 { + status = "okay"; + + /* MT7921's USB Bluetooth has issues with USB2 LPM */ + usb2-lpm-disable; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + vbus-supply = <&usb_vbus>; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts index db25a515e420..690dc7717f2c 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts @@ -139,19 +139,19 @@ }; &u3phy0 { - status="okay"; + status = "okay"; }; &u3phy1 { - status="okay"; + status = "okay"; }; &u3phy2 { - status="okay"; + status = "okay"; }; &u3phy3 { - status="okay"; + status = "okay"; }; &uart0 { diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index b57e620c2c72..066c14989708 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -10,7 +10,6 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/phy/phy.h> #include <dt-bindings/pinctrl/mt8195-pinfunc.h> -#include <dt-bindings/reset/ti-syscon.h> / { compatible = "mediatek,mt8195"; @@ -295,17 +294,7 @@ compatible = "mediatek,mt8195-infracfg_ao", "syscon", "simple-mfd"; reg = <0 0x10001000 0 0x1000>; #clock-cells = <1>; - - infracfg_rst: reset-controller { - compatible = "ti,syscon-reset"; - #reset-cells = <1>; - ti,reset-bits = < - 0x140 18 0x144 18 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* pcie */ - 0x120 0 0x124 0 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* thermal */ - 0x730 10 0x734 10 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* thermal */ - 0x150 5 0x154 5 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* svs gpu */ - >; - }; + #reset-cells = <1>; }; pericfg: syscon@10003000 { @@ -573,6 +562,8 @@ <&apmixedsys CLK_APMIXED_USB1PLL>, <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>; clock-names = "sys_ck", "ref_ck", "mcu_ck", "xhci_ck"; + mediatek,syscon-wakeup = <&pericfg 0x400 103>; + wakeup-source; status = "disabled"; }; @@ -636,6 +627,8 @@ <&apmixedsys CLK_APMIXED_USB1PLL>, <&pericfg_ao CLK_PERI_AO_SSUSB_1P_XHCI>; clock-names = "sys_ck", "ref_ck", "mcu_ck","xhci_ck"; + mediatek,syscon-wakeup = <&pericfg 0x400 104>; + wakeup-source; status = "disabled"; }; @@ -655,6 +648,8 @@ <&topckgen CLK_TOP_SSUSB_P2_REF>, <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>; clock-names = "sys_ck", "ref_ck", "xhci_ck"; + mediatek,syscon-wakeup = <&pericfg 0x400 105>; + wakeup-source; status = "disabled"; }; @@ -674,6 +669,8 @@ <&topckgen CLK_TOP_SSUSB_P3_REF>, <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>; clock-names = "sys_ck", "ref_ck", "xhci_ck"; + mediatek,syscon-wakeup = <&pericfg 0x400 106>; + wakeup-source; status = "disabled"; }; @@ -691,6 +688,53 @@ status = "disabled"; }; + efuse: efuse@11c10000 { + compatible = "mediatek,mt8195-efuse", "mediatek,efuse"; + reg = <0 0x11c10000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + u3_tx_imp_p0: usb3-tx-imp@184,1 { + reg = <0x184 0x1>; + bits = <0 5>; + }; + u3_rx_imp_p0: usb3-rx-imp@184,2 { + reg = <0x184 0x2>; + bits = <5 5>; + }; + u3_intr_p0: usb3-intr@185 { + reg = <0x185 0x1>; + bits = <2 6>; + }; + comb_tx_imp_p1: usb3-tx-imp@186,1 { + reg = <0x186 0x1>; + bits = <0 5>; + }; + comb_rx_imp_p1: usb3-rx-imp@186,2 { + reg = <0x186 0x2>; + bits = <5 5>; + }; + comb_intr_p1: usb3-intr@187 { + reg = <0x187 0x1>; + bits = <2 6>; + }; + u2_intr_p0: usb2-intr-p0@188,1 { + reg = <0x188 0x1>; + bits = <0 5>; + }; + u2_intr_p1: usb2-intr-p1@188,2 { + reg = <0x188 0x2>; + bits = <5 5>; + }; + u2_intr_p2: usb2-intr-p2@189,1 { + reg = <0x189 0x1>; + bits = <2 5>; + }; + u2_intr_p3: usb2-intr-p3@189,2 { + reg = <0x189 0x2>; + bits = <7 5>; + }; + }; + u3phy2: t-phy@11c40000 { compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3"; #address-cells = <1>; @@ -873,6 +917,10 @@ clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>, <&topckgen CLK_TOP_SSUSB_PHY_P1_REF>; clock-names = "ref", "da_ref"; + nvmem-cells = <&comb_intr_p1>, + <&comb_rx_imp_p1>, + <&comb_tx_imp_p1>; + nvmem-cell-names = "intr", "rx_imp", "tx_imp"; #phy-cells = <1>; }; }; @@ -897,6 +945,10 @@ clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>, <&topckgen CLK_TOP_SSUSB_PHY_REF>; clock-names = "ref", "da_ref"; + nvmem-cells = <&u3_intr_p0>, + <&u3_rx_imp_p0>, + <&u3_tx_imp_p0>; + nvmem-cell-names = "intr", "rx_imp", "tx_imp"; #phy-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi index 7a717f926929..8ee1529683a3 100644 --- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi +++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi @@ -28,7 +28,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_default>; - volume-up { + key-volume-up { gpios = <&pio 42 GPIO_ACTIVE_LOW>; label = "volume_up"; linux,code = <115>; @@ -36,7 +36,7 @@ debounce-interval = <15>; }; - volume-down { + key-volume-down { gpios = <&pio 43 GPIO_ACTIVE_LOW>; label = "volume_down"; linux,code = <114>; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi index 699256f1b9d8..bf12be5e8d84 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi @@ -546,164 +546,164 @@ &axi { sfp_eth12: sfp-eth12 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp1>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp1>; tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>; }; sfp_eth13: sfp-eth13 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp2>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp2>; tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>; }; sfp_eth14: sfp-eth14 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp3>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp3>; tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>; }; sfp_eth15: sfp-eth15 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp4>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp4>; tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>; }; sfp_eth48: sfp-eth48 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp5>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp5>; tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>; }; sfp_eth49: sfp-eth49 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp6>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp6>; tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>; }; sfp_eth50: sfp-eth50 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp7>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp7>; tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>; }; sfp_eth51: sfp-eth51 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp8>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp8>; tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>; }; sfp_eth52: sfp-eth52 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp9>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp9>; tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>; }; sfp_eth53: sfp-eth53 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp10>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp10>; tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>; }; sfp_eth54: sfp-eth54 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp11>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp11>; tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>; }; sfp_eth55: sfp-eth55 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp12>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp12>; tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>; }; sfp_eth56: sfp-eth56 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp13>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp13>; tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>; }; sfp_eth57: sfp-eth57 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp14>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp14>; tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>; }; sfp_eth58: sfp-eth58 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp15>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp15>; tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>; }; sfp_eth59: sfp-eth59 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp16>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp16>; tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>; }; sfp_eth60: sfp-eth60 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp17>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp17>; tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>; }; sfp_eth61: sfp-eth61 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp18>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp18>; tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>; }; sfp_eth62: sfp-eth62 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp19>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp19>; tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>; }; sfp_eth63: sfp-eth63 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp20>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp20>; tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>; - los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi index d10a9172b529..ec90bda7ed6a 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi @@ -170,40 +170,40 @@ &axi { sfp_eth60: sfp-eth60 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp1>; - tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp1>; + tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>; rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>; - los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>; }; sfp_eth61: sfp-eth61 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp2>; - tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp2>; + tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>; rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>; - los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>; }; sfp_eth62: sfp-eth62 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp3>; - tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp3>; + tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>; rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>; - los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>; }; sfp_eth63: sfp-eth63 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp4>; - tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp4>; + tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>; rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>; - los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts index f16acb4cabaa..d461da0b8049 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts @@ -1030,7 +1030,7 @@ gpio-keys { compatible = "gpio-keys"; - lid { + switch-lid { label = "Lid"; gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>; linux,input-type = <5>; @@ -1039,7 +1039,7 @@ wakeup-source; }; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 70737a09a9b8..47cf2013afcc 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -915,6 +915,22 @@ remote-endpoint = <&asrc_in7_ep>; }; }; + + xbar_ope1_in_port: port@70 { + reg = <0x70>; + + xbar_ope1_in_ep: endpoint { + remote-endpoint = <&ope1_cif_in_ep>; + }; + }; + + port@71 { + reg = <0x71>; + + xbar_ope1_out_ep: endpoint { + remote-endpoint = <&ope1_cif_out_ep>; + }; + }; }; admaif@290f000 { @@ -1911,6 +1927,31 @@ }; }; + processing-engine@2908000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_ope1_in_ep>; + }; + }; + + ope1_out_port: port@1 { + reg = <0x1>; + + ope1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_ope1_out_ep>; + }; + }; + }; + }; + amixer@290bb00 { status = "okay"; @@ -2437,7 +2478,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0) GPIO_ACTIVE_LOW>; @@ -2448,7 +2489,7 @@ wakeup-source; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1) GPIO_ACTIVE_LOW>; @@ -2457,7 +2498,7 @@ debounce-interval = <10>; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2) GPIO_ACTIVE_LOW>; @@ -2552,6 +2593,7 @@ <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>, <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>, <&xbar_asrc_in7_port>, + <&xbar_ope1_in_port>, /* HW accelerators */ <&sfc1_out_port>, <&sfc2_out_port>, <&sfc3_out_port>, <&sfc4_out_port>, @@ -2571,6 +2613,7 @@ <&mixer_out5_port>, <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>, <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>, + <&ope1_out_port>, /* I/O */ <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>, <&i2s5_port>, <&i2s6_port>, <&dmic1_port>, <&dmic2_port>, diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts index 7e9aad9ff177..3e83a4d52eb1 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts @@ -360,7 +360,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0) GPIO_ACTIVE_LOW>; @@ -371,7 +371,7 @@ wakeup-source; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1) GPIO_ACTIVE_LOW>; @@ -380,7 +380,7 @@ debounce-interval = <10>; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2) GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 0e9afc3e2f26..59a10fb184f8 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -509,6 +509,29 @@ status = "disabled"; }; + tegra_ope1: processing-engine@2908000 { + compatible = "nvidia,tegra186-ope", + "nvidia,tegra210-ope"; + reg = <0x2908000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sound-name-prefix = "OPE1"; + status = "disabled"; + + equalizer@2908100 { + compatible = "nvidia,tegra186-peq", + "nvidia,tegra210-peq"; + reg = <0x2908100 0x100>; + }; + + dynamic-range-compressor@2908200 { + compatible = "nvidia,tegra186-mbdrc", + "nvidia,tegra210-mbdrc"; + reg = <0x2908200 0x200>; + }; + }; + tegra_amixer: amixer@290bb00 { compatible = "nvidia,tegra186-amixer", "nvidia,tegra210-amixer"; @@ -576,7 +599,7 @@ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; + status = "okay"; }; uarta: serial@3100000 { @@ -1461,6 +1484,17 @@ iommus = <&smmu TEGRA186_SID_HOST1X>; + /* Context isolation domains */ + iommu-map = < + 0 &smmu TEGRA186_SID_HOST1X_CTX0 1 + 1 &smmu TEGRA186_SID_HOST1X_CTX1 1 + 2 &smmu TEGRA186_SID_HOST1X_CTX2 1 + 3 &smmu TEGRA186_SID_HOST1X_CTX3 1 + 4 &smmu TEGRA186_SID_HOST1X_CTX4 1 + 5 &smmu TEGRA186_SID_HOST1X_CTX5 1 + 6 &smmu TEGRA186_SID_HOST1X_CTX6 1 + 7 &smmu TEGRA186_SID_HOST1X_CTX7 1>; + dpaux1: dpaux@15040000 { compatible = "nvidia,tegra186-dpaux"; reg = <0x15040000 0x10000>; @@ -1820,6 +1854,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x30000000 0x50000>; + no-memory-wc; cpu_bpmp_tx: sram@4e000 { reg = <0x4e000 0x1000>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index a7d7cfd66379..b0f9393dd39c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -75,7 +75,7 @@ /* SDMMC1 (SD/MMC) */ mmc@3400000 { - cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>; }; /* SDMMC4 (eMMC) */ diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index bce518ace6a0..bc1041d11f6d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -868,6 +868,22 @@ remote-endpoint = <&asrc_in7_ep>; }; }; + + xbar_ope1_in_port: port@70 { + reg = <0x70>; + + xbar_ope1_in_ep: endpoint { + remote-endpoint = <&ope1_cif_in_ep>; + }; + }; + + port@71 { + reg = <0x71>; + + xbar_ope1_out_ep: endpoint { + remote-endpoint = <&ope1_cif_out_ep>; + }; + }; }; admaif@290f000 { @@ -1710,6 +1726,31 @@ }; }; + processing-engine@2908000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_ope1_in_ep>; + }; + }; + + ope1_out_port: port@1 { + reg = <0x1>; + + ope1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_ope1_out_ep>; + }; + }; + }; + }; + amixer@290bb00 { status = "okay"; @@ -2217,7 +2258,7 @@ gpio-keys { compatible = "gpio-keys"; - force-recovery { + key-force-recovery { label = "Force Recovery"; gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>; @@ -2226,7 +2267,7 @@ debounce-interval = <10>; }; - power { + key-power { label = "Power"; gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>; @@ -2273,6 +2314,7 @@ <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>, <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>, <&xbar_asrc_in7_port>, + <&xbar_ope1_in_port>, /* HW accelerators */ <&sfc1_out_port>, <&sfc2_out_port>, <&sfc3_out_port>, <&sfc4_out_port>, @@ -2291,6 +2333,7 @@ <&mixer_out4_port>, <&mixer_out5_port>, <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>, <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>, + <&ope1_out_port>, /* BE I/O Ports */ <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>, <&dmic3_port>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi index 7acc32dd290a..273a1ef716b6 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi @@ -878,6 +878,22 @@ remote-endpoint = <&asrc_in7_ep>; }; }; + + xbar_ope1_in_port: port@70 { + reg = <0x70>; + + xbar_ope1_in_ep: endpoint { + remote-endpoint = <&ope1_cif_in_ep>; + }; + }; + + port@71 { + reg = <0x71>; + + xbar_ope1_out_ep: endpoint { + remote-endpoint = <&ope1_cif_out_ep>; + }; + }; }; admaif@290f000 { @@ -1770,6 +1786,31 @@ }; }; + processing-engine@2908000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_ope1_in_ep>; + }; + }; + + ope1_out_port: port@1 { + reg = <0x1>; + + ope1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_ope1_out_ep>; + }; + }; + }; + }; + amixer@290bb00 { status = "okay"; @@ -2221,7 +2262,7 @@ gpio-keys { compatible = "gpio-keys"; - force-recovery { + key-force-recovery { label = "Force Recovery"; gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>; @@ -2230,7 +2271,7 @@ debounce-interval = <10>; }; - power { + key-power { label = "Power"; gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>; @@ -2323,6 +2364,7 @@ <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>, <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>, <&xbar_asrc_in7_port>, + <&xbar_ope1_in_port>, /* HW accelerators */ <&sfc1_out_port>, <&sfc2_out_port>, <&sfc3_out_port>, <&sfc4_out_port>, @@ -2342,6 +2384,7 @@ <&mixer_out5_port>, <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>, <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>, + <&ope1_out_port>, /* BE I/O Ports */ <&i2s3_port>, <&i2s5_port>, <&dmic1_port>, <&dmic2_port>, <&dmic4_port>, diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index d1f8248c00f4..d0ed55e5c860 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -23,7 +23,7 @@ #size-cells = <1>; ranges = <0x0 0x0 0x0 0x40000000>; - misc@100000 { + apbmisc: misc@100000 { compatible = "nvidia,tegra194-misc"; reg = <0x00100000 0xf000>, <0x0010f000 0x1000>; @@ -88,6 +88,27 @@ gpio-controller; }; + cbb-noc@2300000 { + compatible = "nvidia,tegra194-cbb-noc"; + reg = <0x02300000 0x1000>; + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; + nvidia,axi2apb = <&axi2apb>; + nvidia,apbmisc = <&apbmisc>; + status = "okay"; + }; + + axi2apb: axi2apb@2390000 { + compatible = "nvidia,tegra194-axi2apb"; + reg = <0x2390000 0x1000>, + <0x23a0000 0x1000>, + <0x23b0000 0x1000>, + <0x23c0000 0x1000>, + <0x23d0000 0x1000>, + <0x23e0000 0x1000>; + status = "okay"; + }; + ethernet@2490000 { compatible = "nvidia,tegra194-eqos", "nvidia,tegra186-eqos", @@ -562,6 +583,29 @@ status = "disabled"; }; + tegra_ope1: processing-engine@2908000 { + compatible = "nvidia,tegra194-ope", + "nvidia,tegra210-ope"; + reg = <0x2908000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sound-name-prefix = "OPE1"; + status = "disabled"; + + equalizer@2908100 { + compatible = "nvidia,tegra194-peq", + "nvidia,tegra210-peq"; + reg = <0x2908100 0x100>; + }; + + dynamic-range-compressor@2908200 { + compatible = "nvidia,tegra194-mbdrc", + "nvidia,tegra210-mbdrc"; + reg = <0x2908200 0x200>; + }; + }; + tegra_amixer: amixer@290bb00 { compatible = "nvidia,tegra194-amixer", "nvidia,tegra210-amixer"; @@ -675,6 +719,22 @@ }; }; + timer@3010000 { + compatible = "nvidia,tegra186-timer"; + reg = <0x03010000 0x000e0000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + }; + uarta: serial@3100000 { compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; reg = <0x03100000 0x40>; @@ -1460,6 +1520,26 @@ #phy-cells = <0>; }; + sce-noc@b600000 { + compatible = "nvidia,tegra194-sce-noc"; + reg = <0xb600000 0x1000>; + interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + nvidia,axi2apb = <&axi2apb>; + nvidia,apbmisc = <&apbmisc>; + status = "okay"; + }; + + rce-noc@be00000 { + compatible = "nvidia,tegra194-rce-noc"; + reg = <0xbe00000 0x1000>; + interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + nvidia,axi2apb = <&axi2apb>; + nvidia,apbmisc = <&apbmisc>; + status = "okay"; + }; + hsp_aon: hsp@c150000 { compatible = "nvidia,tegra194-hsp"; reg = <0x0c150000 0x90000>; @@ -1594,6 +1674,25 @@ }; + aon-noc@c600000 { + compatible = "nvidia,tegra194-aon-noc"; + reg = <0xc600000 0x1000>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + nvidia,apbmisc = <&apbmisc>; + status = "okay"; + }; + + bpmp-noc@d600000 { + compatible = "nvidia,tegra194-bpmp-noc"; + reg = <0xd600000 0x1000>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + nvidia,axi2apb = <&axi2apb>; + nvidia,apbmisc = <&apbmisc>; + status = "okay"; + }; + iommu@10000000 { compatible = "nvidia,tegra194-smmu", "nvidia,smmu-500"; reg = <0x10000000 0x800000>; @@ -1769,6 +1868,17 @@ interconnect-names = "dma-mem"; iommus = <&smmu TEGRA194_SID_HOST1X>; + /* Context isolation domains */ + iommu-map = < + 0 &smmu TEGRA194_SID_HOST1X_CTX0 1 + 1 &smmu TEGRA194_SID_HOST1X_CTX1 1 + 2 &smmu TEGRA194_SID_HOST1X_CTX2 1 + 3 &smmu TEGRA194_SID_HOST1X_CTX3 1 + 4 &smmu TEGRA194_SID_HOST1X_CTX4 1 + 5 &smmu TEGRA194_SID_HOST1X_CTX5 1 + 6 &smmu TEGRA194_SID_HOST1X_CTX6 1 + 7 &smmu TEGRA194_SID_HOST1X_CTX7 1>; + nvdec@15140000 { compatible = "nvidia,tegra194-nvdec"; reg = <0x15140000 0x00040000>; @@ -2684,6 +2794,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x40000000 0x50000>; + no-memory-wc; cpu_bpmp_tx: sram@4e000 { reg = <0x4e000 0x1000>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts index 328fbfec4ee8..1e26ca91a944 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts @@ -682,6 +682,56 @@ }; }; + processing-engine@702d8000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_ope1_in_ep>; + }; + }; + + ope1_out_port: port@1 { + reg = <0x1>; + + ope1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_ope1_out_ep>; + }; + }; + }; + }; + + processing-engine@702d8400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_ope2_in_ep>; + }; + }; + + ope2_out_port: port@1 { + reg = <0x1>; + + ope2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_ope2_out_ep>; + }; + }; + }; + }; + amixer@702dbb00 { status = "okay"; @@ -1251,6 +1301,38 @@ remote-endpoint = <&mixer_out5_ep>; }; }; + + xbar_ope1_in_port: port@41 { + reg = <0x41>; + + xbar_ope1_in_ep: endpoint { + remote-endpoint = <&ope1_cif_in_ep>; + }; + }; + + port@42 { + reg = <0x42>; + + xbar_ope1_out_ep: endpoint { + remote-endpoint = <&ope1_cif_out_ep>; + }; + }; + + xbar_ope2_in_port: port@43 { + reg = <0x43>; + + xbar_ope2_in_ep: endpoint { + remote-endpoint = <&ope2_cif_in_ep>; + }; + }; + + port@44 { + reg = <0x44>; + + xbar_ope2_out_ep: endpoint { + remote-endpoint = <&ope2_cif_out_ep>; + }; + }; }; }; }; @@ -1281,6 +1363,7 @@ <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>, <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>, <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>, + <&xbar_ope1_in_port>, <&xbar_ope2_in_port>, /* HW accelerators */ <&sfc1_out_port>, <&sfc2_out_port>, <&sfc3_out_port>, <&sfc4_out_port>, @@ -1293,6 +1376,7 @@ <&mixer_out1_port>, <&mixer_out2_port>, <&mixer_out3_port>, <&mixer_out4_port>, <&mixer_out5_port>, + <&ope1_out_port>, <&ope2_out_port>, /* I/O DAP Ports */ <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>, <&i2s5_port>, <&dmic1_port>, <&dmic2_port>, <&dmic3_port>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index 4b43b89a9651..a44c56c1e56e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1530,20 +1530,20 @@ compatible = "gpio-keys"; label = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; wakeup-source; }; - volume_down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; }; - volume_up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi index 10347b6e6e84..8e657b10569d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi @@ -1596,7 +1596,7 @@ compatible = "gpio-keys"; status = "okay"; - power { + key-power { debounce-interval = <30>; gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; label = "Power"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 746bd52ea3f7..37678c337a34 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -1074,6 +1074,56 @@ }; }; + processing-engine@702d8000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_ope1_in_ep>; + }; + }; + + ope1_out_port: port@1 { + reg = <0x1>; + + ope1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_ope1_out_ep>; + }; + }; + }; + }; + + processing-engine@702d8400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_ope2_in_ep>; + }; + }; + + ope2_out_port: port@1 { + reg = <0x1>; + + ope2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_ope2_out_ep>; + }; + }; + }; + }; + amixer@702dbb00 { status = "okay"; @@ -1611,6 +1661,38 @@ remote-endpoint = <&mixer_out5_ep>; }; }; + + xbar_ope1_in_port: port@41 { + reg = <0x41>; + + xbar_ope1_in_ep: endpoint { + remote-endpoint = <&ope1_cif_in_ep>; + }; + }; + + port@42 { + reg = <0x42>; + + xbar_ope1_out_ep: endpoint { + remote-endpoint = <&ope1_cif_out_ep>; + }; + }; + + xbar_ope2_in_port: port@43 { + reg = <0x43>; + + xbar_ope2_in_ep: endpoint { + remote-endpoint = <&ope2_cif_in_ep>; + }; + }; + + port@44 { + reg = <0x44>; + + xbar_ope2_out_ep: endpoint { + remote-endpoint = <&ope2_cif_out_ep>; + }; + }; }; }; }; @@ -1720,7 +1802,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; @@ -1730,7 +1812,7 @@ wakeup-source; }; - force-recovery { + key-force-recovery { label = "Force Recovery"; gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; @@ -1884,6 +1966,7 @@ <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>, <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>, <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>, + <&xbar_ope1_in_port>, <&xbar_ope2_in_port>, /* HW accelerators */ <&sfc1_out_port>, <&sfc2_out_port>, <&sfc3_out_port>, <&sfc4_out_port>, @@ -1896,6 +1979,7 @@ <&mixer_out1_port>, <&mixer_out2_port>, <&mixer_out3_port>, <&mixer_out4_port>, <&mixer_out5_port>, + <&ope1_out_port>, <&ope2_out_port>, /* I/O DAP Ports */ <&i2s3_port>, <&i2s4_port>, <&dmic1_port>, <&dmic2_port>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts index a263d51882ee..5f3a1c56b2eb 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -1756,7 +1756,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; @@ -1764,7 +1764,7 @@ wakeup-source; }; - lid { + switch-lid { label = "Lid"; gpios = <&gpio TEGRA_GPIO(B, 4) GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; @@ -1772,7 +1772,7 @@ wakeup-source; }; - tablet_mode { + switch-tablet-mode { label = "Tablet Mode"; gpios = <&gpio TEGRA_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; linux,input-type = <EV_SW>; @@ -1780,13 +1780,13 @@ wakeup-source; }; - volume_down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; }; - volume_up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(M, 4) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 4f0e51f1a343..724e87450605 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -1055,7 +1055,7 @@ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; resets = <&tegra_car 142>; reset-names = "padctl"; - nvidia,pmc = <&tegra_pmc>; + nvidia,pmc = <&tegra_pmc>; status = "disabled"; @@ -1723,6 +1723,46 @@ status = "disabled"; }; + tegra_ope1: processing-engine@702d8000 { + compatible = "nvidia,tegra210-ope"; + reg = <0x702d8000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sound-name-prefix = "OPE1"; + status = "disabled"; + + equalizer@702d8100 { + compatible = "nvidia,tegra210-peq"; + reg = <0x702d8100 0x100>; + }; + + dynamic-range-compressor@702d8200 { + compatible = "nvidia,tegra210-mbdrc"; + reg = <0x702d8200 0x200>; + }; + }; + + tegra_ope2: processing-engine@702d8400 { + compatible = "nvidia,tegra210-ope"; + reg = <0x702d8400 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sound-name-prefix = "OPE2"; + status = "disabled"; + + equalizer@702d8500 { + compatible = "nvidia,tegra210-peq"; + reg = <0x702d8500 0x100>; + }; + + dynamic-range-compressor@702d8600 { + compatible = "nvidia,tegra210-mbdrc"; + reg = <0x702d8600 0x200>; + }; + }; + tegra_amixer: amixer@702dbb00 { compatible = "nvidia,tegra210-amixer"; reg = <0x702dbb00 0x800>; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts index eaf1994abb04..02a10bb38562 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts @@ -867,6 +867,22 @@ remote-endpoint = <&asrc_in7_ep>; }; }; + + xbar_ope1_in_port: port@70 { + reg = <0x70>; + + xbar_ope1_in_ep: endpoint { + remote-endpoint = <&ope1_cif_in_ep>; + }; + }; + + port@71 { + reg = <0x71>; + + xbar_ope1_out_ep: endpoint { + remote-endpoint = <&ope1_cif_out_ep>; + }; + }; }; i2s@2901000 { @@ -1490,6 +1506,31 @@ }; }; + processing-engine@2908000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_ope1_in_ep>; + }; + }; + + ope1_out_port: port@1 { + reg = <0x1>; + + ope1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_ope1_out_ep>; + }; + }; + }; + }; + mvc@290a000 { status = "okay"; @@ -1980,14 +2021,14 @@ compatible = "gpio-keys"; status = "okay"; - force-recovery { + key-force-recovery { label = "Force Recovery"; gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <BTN_1>; }; - power-key { + key-power { label = "Power"; gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; @@ -1996,7 +2037,7 @@ wakeup-source; }; - suspend { + key-suspend { label = "Suspend"; gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; @@ -2044,6 +2085,7 @@ <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>, <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>, <&xbar_asrc_in7_port>, + <&xbar_ope1_in_port>, /* HW accelerators */ <&sfc1_out_port>, <&sfc2_out_port>, <&sfc3_out_port>, <&sfc4_out_port>, @@ -2062,6 +2104,7 @@ <&mix_out4_port>, <&mix_out5_port>, <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>, <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>, + <&ope1_out_port>, /* BE I/O Ports */ <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>, <&dmic3_port>; diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index cb3af539e477..81a0f599685f 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -21,6 +21,49 @@ ranges = <0x0 0x0 0x0 0x40000000>; + gpcdma: dma-controller@2600000 { + compatible = "nvidia,tegra234-gpcdma", + "nvidia,tegra194-gpcdma", + "nvidia,tegra186-gpcdma"; + reg = <0x2600000 0x210000>; + resets = <&bpmp TEGRA234_RESET_GPCDMA>; + reset-names = "gpcdma"; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>; + dma-coherent; + }; + aconnect@2900000 { compatible = "nvidia,tegra234-aconnect", "nvidia,tegra210-aconnect"; @@ -304,6 +347,29 @@ status = "disabled"; }; + tegra_ope1: processing-engine@2908000 { + compatible = "nvidia,tegra234-ope", + "nvidia,tegra210-ope"; + reg = <0x2908000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sound-name-prefix = "OPE1"; + status = "disabled"; + + equalizer@2908100 { + compatible = "nvidia,tegra234-peq", + "nvidia,tegra210-peq"; + reg = <0x2908100 0x100>; + }; + + dynamic-range-compressor@2908200 { + compatible = "nvidia,tegra234-mbdrc", + "nvidia,tegra210-mbdrc"; + reg = <0x2908200 0x200>; + }; + }; + tegra_mvc1: mvc@290a000 { compatible = "nvidia,tegra234-mvc", "nvidia,tegra210-mvc"; @@ -454,6 +520,74 @@ status = "okay"; }; + timer@2080000 { + compatible = "nvidia,tegra234-timer"; + reg = <0x02080000 0x00121000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + }; + + host1x@13e00000 { + compatible = "nvidia,tegra234-host1x"; + reg = <0x13e00000 0x10000>, + <0x13e10000 0x10000>, + <0x13e40000 0x10000>; + reg-names = "common", "hypervisor", "vm"; + interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "syncpt0", "syncpt1", "syncpt2", "syncpt3", "syncpt4", + "syncpt5", "syncpt6", "syncpt7", "host1x"; + clocks = <&bpmp TEGRA234_CLK_HOST1X>; + clock-names = "host1x"; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x15000000 0x15000000 0x01000000>; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_HOST1XDMAR &emc>; + interconnect-names = "dma-mem"; + iommus = <&smmu_niso1 TEGRA234_SID_HOST1X>; + + vic@15340000 { + compatible = "nvidia,tegra234-vic"; + reg = <0x15340000 0x00040000>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA234_CLK_VIC>; + clock-names = "vic"; + resets = <&bpmp TEGRA234_RESET_VIC>; + reset-names = "vic"; + + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_VIC>; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_VICSRD &emc>, + <&mc TEGRA234_MEMORY_CLIENT_VICSWR &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso1 TEGRA234_SID_VIC>; + dma-coherent; + }; + }; + gpio: gpio@2200000 { compatible = "nvidia,tegra234-gpio"; reg-names = "security", "gpio"; @@ -933,6 +1067,20 @@ status = "okay"; }; + sce-fabric@b600000 { + compatible = "nvidia,tegra234-sce-fabric"; + reg = <0xb600000 0x40000>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + }; + + rce-fabric@be00000 { + compatible = "nvidia,tegra234-rce-fabric"; + reg = <0xbe00000 0x40000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + }; + hsp_aon: hsp@c150000 { compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp"; reg = <0x0c150000 0x90000>; @@ -1017,6 +1165,27 @@ interrupt-controller; }; + aon-fabric@c600000 { + compatible = "nvidia,tegra234-aon-fabric"; + reg = <0xc600000 0x40000>; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + }; + + bpmp-fabric@d600000 { + compatible = "nvidia,tegra234-bpmp-fabric"; + reg = <0xd600000 0x40000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + }; + + dce-fabric@de00000 { + compatible = "nvidia,tegra234-sce-fabric"; + reg = <0xde00000 0x40000>; + interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + }; + gic: interrupt-controller@f400000 { compatible = "arm,gic-v3"; reg = <0x0f400000 0x010000>, /* GICD */ @@ -1310,6 +1479,13 @@ nvidia,memory-controller = <&mc>; status = "okay"; }; + + cbb-fabric@13a00000 { + compatible = "nvidia,tegra234-cbb-fabric"; + reg = <0x13a00000 0x400000>; + interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; + }; }; ccplex@e000000 { @@ -1325,6 +1501,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x40000000 0x80000>; + no-memory-wc; cpu_bpmp_tx: sram@70000 { reg = <0x70000 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 2f8aec2cc6db..1d86a33de528 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -30,13 +30,11 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-satsuki.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-suzuran.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb -dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-dora.dtb -dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-kagura.dtb -dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-keyaki.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-dora.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-kagura.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-keyaki.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-gemini.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-natrium.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-scorpio.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-fxtec-pro1.dtb @@ -52,6 +50,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb @@ -60,6 +59,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r4.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown-r0.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb @@ -75,12 +76,28 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r9.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r4.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r5.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r9.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-auo.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-boe.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-auo.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-boe.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-parade.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-ti.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-parade.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-ti.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-boe.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-inx.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb @@ -89,6 +106,9 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb +dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb @@ -100,6 +120,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyln.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-enchilada.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb @@ -107,6 +129,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-akari.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-akatsuki.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-apollo.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index 7c1eab605c15..1b613098fb4a 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -8,6 +8,7 @@ #include "msm8916-pm8916.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> #include <dt-bindings/sound/apq8016-lpass.h> @@ -20,11 +21,11 @@ serial0 = &blsp1_uart2; serial1 = &blsp1_uart1; usid0 = &pm8916_0; - i2c0 = &blsp_i2c2; - i2c1 = &blsp_i2c6; - i2c3 = &blsp_i2c4; - spi0 = &blsp_spi5; - spi1 = &blsp_spi3; + i2c0 = &blsp_i2c2; + i2c1 = &blsp_i2c6; + i2c3 = &blsp_i2c4; + spi0 = &blsp_spi5; + spi1 = &blsp_spi3; }; chosen { @@ -92,14 +93,12 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; pinctrl-names = "default"; pinctrl-0 = <&msm_key_volp_n_default>; - button@0 { + button { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; @@ -116,6 +115,8 @@ led@1 { label = "apq8016-sbc:green:user1"; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_GREEN>; gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; @@ -123,6 +124,8 @@ led@2 { label = "apq8016-sbc:green:user2"; + function = LED_FUNCTION_DISK_ACTIVITY; + color = <LED_COLOR_ID_GREEN>; gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; @@ -130,6 +133,8 @@ led@3 { label = "apq8016-sbc:green:user3"; + function = LED_FUNCTION_DISK_ACTIVITY; + color = <LED_COLOR_ID_GREEN>; gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc1"; default-state = "off"; @@ -137,6 +142,7 @@ led@4 { label = "apq8016-sbc:green:user4"; + color = <LED_COLOR_ID_GREEN>; gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "none"; panic-indicator; @@ -145,6 +151,8 @@ led@5 { label = "apq8016-sbc:yellow:wlan"; + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_YELLOW>; gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tx"; default-state = "off"; @@ -152,6 +160,8 @@ led@6 { label = "apq8016-sbc:blue:bt"; + function = LED_FUNCTION_BLUETOOTH; + color = <LED_COLOR_ID_BLUE>; gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "bluetooth-power"; default-state = "off"; @@ -773,7 +783,7 @@ "USB_HUB_RESET_N_PM", "USB_SW_SEL_PM"; - usb_hub_reset_pm: usb-hub-reset-pm { + usb_hub_reset_pm: usb-hub-reset-pm-state { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; @@ -781,14 +791,14 @@ output-high; }; - usb_hub_reset_pm_device: usb-hub-reset-pm-device { + usb_hub_reset_pm_device: usb-hub-reset-pm-device-state { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; output-low; }; - usb_sw_sel_pm: usb-sw-sel-pm { + usb_sw_sel_pm: usb-sw-sel-pm-state { pins = "gpio4"; function = PMIC_GPIO_FUNC_NORMAL; @@ -797,7 +807,7 @@ output-high; }; - usb_sw_sel_pm_device: usb-sw-sel-pm-device { + usb_sw_sel_pm_device: usb-sw-sel-pm-device-state { pins = "gpio4"; function = PMIC_GPIO_FUNC_NORMAL; @@ -806,7 +816,7 @@ output-low; }; - pm8916_gpios_leds: pm8916-gpios-leds { + pm8916_gpios_leds: pm8916-gpios-leds-state { pins = "gpio1", "gpio2"; function = PMIC_GPIO_FUNC_NORMAL; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 49afbb1a066a..c1cb1ba5173c 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -10,6 +10,7 @@ #include "pmi8994.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> @@ -49,11 +50,11 @@ serial0 = &blsp2_uart2; serial1 = &blsp2_uart3; serial2 = &blsp1_uart2; - i2c0 = &blsp1_i2c3; - i2c1 = &blsp2_i2c1; - i2c2 = &blsp2_i2c1; - spi0 = &blsp1_spi1; - spi1 = &blsp2_spi6; + i2c0 = &blsp1_i2c3; + i2c1 = &blsp2_i2c1; + i2c2 = &blsp2_i2c1; + spi0 = &blsp1_spi1; + spi1 = &blsp2_spi6; }; chosen { @@ -82,16 +83,14 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; pinctrl-names = "default"; pinctrl-0 = <&volume_up_gpio>; - button@0 { + button { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; @@ -555,15 +554,16 @@ pinctrl-names = "default"; pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; - ls_exp_gpio_f: pm8994_gpio5 { + ls_exp_gpio_f: pm8994-gpio5-state { pinconf { pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; output-low; power-source = <2>; // PM8994_GPIO_S4, 1.8V }; }; - bt_en_gpios: bt_en_gpios { + bt_en_gpios: bt-en-pios-state { pinconf { pins = "gpio19"; function = PMIC_GPIO_FUNC_NORMAL; @@ -574,7 +574,7 @@ }; }; - wlan_en_gpios: wlan_en_gpios { + wlan_en_gpios: wlan-en-gpios-state { pinconf { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; @@ -585,7 +585,7 @@ }; }; - audio_mclk: clk_div1 { + audio_mclk: clk-div1-state { pinconf { pins = "gpio15"; function = "func1"; @@ -593,7 +593,7 @@ }; }; - volume_up_gpio: pm8996_gpio2 { + volume_up_gpio: pm8996-gpio2-state { pinconf { pins = "gpio2"; function = "normal"; @@ -605,7 +605,7 @@ }; }; - divclk4_pin_a: divclk4 { + divclk4_pin_a: divclk4-state { pinconf { pins = "gpio18"; function = PMIC_GPIO_FUNC_FUNC2; @@ -615,7 +615,7 @@ }; }; - usb3_vbus_det_gpio: pm8996_gpio22 { + usb3_vbus_det_gpio: pm8996-gpio22-state { pinconf { pins = "gpio22"; function = PMIC_GPIO_FUNC_NORMAL; @@ -671,7 +671,7 @@ "NC", "NC"; - usb2_vbus_det_gpio: pmi8996_gpio6 { + usb2_vbus_det_gpio: pmi8996-gpio6-state { pinconf { pins = "gpio6"; function = PMIC_GPIO_FUNC_NORMAL; @@ -683,6 +683,61 @@ }; }; +&pmi8994_lpg { + qcom,power-source = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmi8994_mpp2_userled4>; + + qcom,dtest = <0 0>, + <0 0>, + <0 0>, + <4 1>; + + status = "okay"; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <1>; + + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <0>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <2>; + }; + + led@4 { + reg = <4>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <3>; + }; +}; + +&pmi8994_mpps { + pmi8994_mpp2_userled4: mpp2-userled4-state { + pins = "mpp2"; + function = "sink"; + + output-low; + qcom,dtest = <4>; + }; +}; + &pmi8994_spmi_regulators { vdd_s2-supply = <&vph_pwr>; @@ -957,7 +1012,7 @@ &sound { compatible = "qcom,apq8096-sndcard"; model = "DB820c"; - audio-routing = "RX_BIAS", "MCLK", + audio-routing = "RX_BIAS", "MCLK", "MM_DL1", "MultiMedia1 Playback", "MM_DL2", "MultiMedia2 Playback", "MultiMedia3 Capture", "MM_UL3"; diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts index 821cb7c0c183..1ba2eca33c7b 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts +++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts @@ -29,13 +29,13 @@ status = "okay"; }; -&i2c_1 { +&blsp1_i2c3 { pinctrl-0 = <&i2c_1_pins>; pinctrl-names = "default"; status = "okay"; }; -&spi_0 { +&blsp1_spi1 { cs-select = <0>; status = "okay"; @@ -43,7 +43,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0>; - compatible = "n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <50000000>; }; }; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index c89499e366d3..aaad7d9059f6 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -87,7 +87,7 @@ }; }; - cpu_opp_table: cpu_opp_table { + cpu_opp_table: opp-table-cpu { compatible = "operating-points-v2"; opp-shared; @@ -125,7 +125,7 @@ firmware { scm { - compatible = "qcom,scm"; + compatible = "qcom,scm-ipq6018", "qcom,scm"; }; }; @@ -282,7 +282,7 @@ status = "disabled"; }; - spi_0: spi@78b5000 { + blsp1_spi1: spi@78b5000 { compatible = "qcom,spi-qup-v2.2.1"; #address-cells = <1>; #size-cells = <0>; @@ -297,7 +297,7 @@ status = "disabled"; }; - spi_1: spi@78b6000 { + blsp1_spi2: spi@78b6000 { compatible = "qcom,spi-qup-v2.2.1"; #address-cells = <1>; #size-cells = <0>; @@ -312,7 +312,7 @@ status = "disabled"; }; - i2c_0: i2c@78b6000 { + blsp1_i2c2: i2c@78b6000 { compatible = "qcom,i2c-qup-v2.2.1"; #address-cells = <1>; #size-cells = <0>; @@ -321,13 +321,13 @@ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - clock-frequency = <400000>; + clock-frequency = <400000>; dmas = <&blsp_dma 14>, <&blsp_dma 15>; dma-names = "tx", "rx"; status = "disabled"; }; - i2c_1: i2c@78b7000 { /* BLSP1 QUP2 */ + blsp1_i2c3: i2c@78b7000 { compatible = "qcom,i2c-qup-v2.2.1"; #address-cells = <1>; #size-cells = <0>; @@ -336,7 +336,7 @@ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - clock-frequency = <400000>; + clock-frequency = <400000>; dmas = <&blsp_dma 16>, <&blsp_dma 17>; dma-names = "tx", "rx"; status = "disabled"; @@ -525,9 +525,9 @@ }; timer@b120000 { - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x10000000>; compatible = "arm,armv7-timer-mem"; reg = <0x0 0x0b120000 0x0 0x1000>; @@ -535,49 +535,49 @@ frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x0b121000 0x0 0x1000>, - <0x0 0x0b122000 0x0 0x1000>; + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; }; frame@b123000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0xb123000 0x0 0x1000>; + reg = <0x0b123000 0x1000>; status = "disabled"; }; frame@b124000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x0b124000 0x0 0x1000>; + reg = <0x0b124000 0x1000>; status = "disabled"; }; frame@b125000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x0b125000 0x0 0x1000>; + reg = <0x0b125000 0x1000>; status = "disabled"; }; frame@b126000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x0b126000 0x0 0x1000>; + reg = <0x0b126000 0x1000>; status = "disabled"; }; frame@b127000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x0b127000 0x0 0x1000>; + reg = <0x0b127000 0x1000>; status = "disabled"; }; frame@b128000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x0b128000 0x0 0x1000>; + reg = <0x0b128000 0x1000>; status = "disabled"; }; }; @@ -621,6 +621,7 @@ glink-edge { interrupts = <GIC_SPI 321 IRQ_TYPE_EDGE_RISING>; + label = "rtr"; qcom,remote-pid = <1>; mboxes = <&apcs_glb 8>; @@ -710,7 +711,7 @@ <0x0 0x00078800 0x0 0x1F8>, /* PCS */ <0x0 0x00078600 0x0 0x044>; /* PCS misc */ #phy-cells = <0>; - #clock-cells = <1>; + #clock-cells = <0>; clocks = <&gcc GCC_USB0_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "gcc_usb0_pipe_clk_src"; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts index de20cb98acd3..81dc3a0bcd7d 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -5,11 +5,8 @@ #include "ipq8074.dtsi" / { - #address-cells = <0x2>; - #size-cells = <0x2>; model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; compatible = "qcom,ipq8074-hk01", "qcom,ipq8074"; - interrupt-parent = <&intc>; aliases { serial0 = &blsp1_uart5; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi index ce86d9b10d69..40415d988e4a 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi @@ -7,11 +7,6 @@ #include "ipq8074.dtsi" / { - #address-cells = <0x2>; - #size-cells = <0x2>; - - interrupt-parent = <&intc>; - aliases { serial0 = &blsp1_uart5; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 4c38b15c6fd4..d53675fc1595 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -7,8 +7,12 @@ #include <dt-bindings/clock/qcom,gcc-ipq8074.h> / { + #address-cells = <2>; + #size-cells = <2>; + model = "Qualcomm Technologies, Inc. IPQ8074"; compatible = "qcom,ipq8074"; + interrupt-parent = <&intc>; clocks { sleep_clk: sleep_clk { @@ -119,7 +123,7 @@ <&xo>; clock-names = "aux", "cfg_ahb", "ref"; - resets = <&gcc GCC_USB1_PHY_BCR>, + resets = <&gcc GCC_USB1_PHY_BCR>, <&gcc GCC_USB3PHY_1_PHY_BCR>; reset-names = "phy","common"; status = "disabled"; @@ -130,7 +134,7 @@ <0x00058800 0x1f8>, /* PCS */ <0x00058600 0x044>; /* PCS misc*/ #phy-cells = <0>; - #clock-cells = <1>; + #clock-cells = <0>; clocks = <&gcc GCC_USB1_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "gcc_usb1_pipe_clk_src"; @@ -162,7 +166,7 @@ <&xo>; clock-names = "aux", "cfg_ahb", "ref"; - resets = <&gcc GCC_USB0_PHY_BCR>, + resets = <&gcc GCC_USB0_PHY_BCR>, <&gcc GCC_USB3PHY_0_PHY_BCR>; reset-names = "phy","common"; status = "disabled"; @@ -173,7 +177,7 @@ <0x00078800 0x1f8>, /* PCS */ <0x00078600 0x044>; /* PCS misc*/ #phy-cells = <0>; - #clock-cells = <1>; + #clock-cells = <0>; clocks = <&gcc GCC_USB0_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "gcc_usb0_pipe_clk_src"; @@ -347,6 +351,7 @@ compatible = "qcom,gcc-ipq8074"; reg = <0x01800000 0x80000>; #clock-cells = <0x1>; + #power-domain-cells = <1>; #reset-cells = <0x1>; }; @@ -375,7 +380,7 @@ cell-index = <0>; }; - sdhc_1: sdhci@7824900 { + sdhc_1: mmc@7824900 { compatible = "qcom,sdhci-msm-v4"; reg = <0x7824900 0x500>, <0x7824000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -384,10 +389,11 @@ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&xo>, - <&gcc GCC_SDCC1_AHB_CLK>, - <&gcc GCC_SDCC1_APPS_CLK>; - clock-names = "xo", "iface", "core"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC1_BCR>; max-frequency = <384000000>; mmc-ddr-1_8v; mmc-hs200-1_8v; @@ -534,7 +540,7 @@ status = "disabled"; }; - qpic_nand: nand@79b0000 { + qpic_nand: nand-controller@79b0000 { compatible = "qcom,ipq8074-nand"; reg = <0x079b0000 0x10000>; #address-cells = <1>; @@ -575,6 +581,8 @@ <133330000>, <19200000>; + power-domains = <&gcc USB0_GDSC>; + resets = <&gcc GCC_USB0_BCR>; status = "disabled"; @@ -615,6 +623,8 @@ <133330000>, <19200000>; + power-domains = <&gcc USB1_GDSC>; + resets = <&gcc GCC_USB1_BCR>; status = "disabled"; @@ -648,14 +658,6 @@ }; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - watchdog: watchdog@b017000 { compatible = "qcom,kpss-wdt"; reg = <0xb017000 0x1000>; @@ -664,6 +666,14 @@ timeout-sec = <30>; }; + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq8074-apcs-apps-global"; + reg = <0x0b111000 0x6000>; + + #clock-cells = <1>; + #mbox-cells = <1>; + }; + timer@b120000 { #address-cells = <1>; #size-cells = <1>; @@ -847,4 +857,12 @@ status = "disabled"; }; }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts index 265e539e7e99..3dc9619fde6e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -27,7 +27,7 @@ label = "GPIO Buttons"; - volume-up { + button-volume-up { label = "Volume Up"; gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts index d4d33dd3584a..dd92070a1211 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts @@ -28,14 +28,14 @@ label = "GPIO Buttons"; - volume-up { + button-volume-up { label = "Volume Up"; gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; debounce-interval = <15>; }; - volume-down { + button-volume-down { label = "Volume Down"; gpios = <&msmgpio 117 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts index 00488afb413d..9e470c67274e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts @@ -39,7 +39,7 @@ label = "GPIO Buttons"; - volume-up { + button-volume-up { label = "Volume Up"; gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index b3836dde8a54..d85e7f7c0835 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -39,7 +39,7 @@ label = "GPIO Buttons"; - volume-up { + button-volume-up { label = "Volume Up"; gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts index f9ce123471d4..b4812f093b17 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -28,7 +28,7 @@ label = "GPIO Buttons"; - volume-up { + button-volume-up { label = "Volume Up"; gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 9b4b7de7cec2..10f6509a8709 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -31,13 +31,13 @@ label = "GPIO Buttons"; - volume-up { + button-volume-up { label = "Volume Up"; gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; - home { + button-home { label = "Home"; gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; @@ -52,7 +52,7 @@ label = "GPIO Hall Effect Sensor"; - hall-sensor { + event-hall-sensor { label = "Hall Effect Sensor"; gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; @@ -460,10 +460,18 @@ drive-strength = <2>; bias-disable; }; + + ts_int_default: ts-int-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; }; &pm8916_gpios { - nfc_clk_req: nfc-clk-req { + nfc_clk_req: nfc-clk-req-state { pins = "gpio2"; function = "func1"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index 4ba11b020f9b..bc198a2eea25 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -128,12 +128,4 @@ drive-strength = <2>; bias-disable; }; - - ts_int_default: ts-int-default { - pins = "gpio13"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index d978c9ac179d..7f2ab1891d91 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -69,12 +69,4 @@ drive-strength = <2>; bias-disable; }; - - ts_int_default: ts-int-default { - pins = "gpio13"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts index 6c408d61de75..eabeed18cfaa 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts @@ -34,13 +34,13 @@ label = "GPIO Buttons"; - volume-up { + button-volume-up { label = "Volume Up"; gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; - home-key { + button-home { label = "Home Key"; gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts index 58dfbfff4c7d..439e89cf7878 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -49,13 +49,13 @@ label = "GPIO Buttons"; - volume-up { + button-volume-up { label = "Volume Up"; gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; - home { + button-home { label = "Home"; gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; @@ -70,7 +70,7 @@ label = "GPIO Hall Effect Sensor"; - hall-sensor { + event-hall-sensor { label = "Hall Effect Sensor"; gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts index 69a44c6f57fc..84a352dcf9a2 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -29,7 +29,7 @@ label = "GPIO Buttons"; - volume-up { + button-volume-up { label = "Volume Up"; gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 05472510e29d..48bc2e09128d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -216,7 +216,7 @@ }; }; - cpu_opp_table: cpu-opp-table { + cpu_opp_table: opp-table-cpu { compatible = "operating-points-v2"; opp-shared; @@ -301,6 +301,8 @@ rpmcc: clock-controller { compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; }; rpmpd: power-controller { @@ -436,7 +438,7 @@ }; qfprom: qfprom@5c000 { - compatible = "qcom,qfprom"; + compatible = "qcom,msm8916-qfprom", "qcom,qfprom"; reg = <0x0005c000 0x1000>; #address-cells = <1>; #size-cells = <1>; @@ -1464,7 +1466,7 @@ #sound-dai-cells = <1>; }; - sdhc_1: sdhci@7824000 { + sdhc_1: mmc@7824000 { compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07824900 0x11c>, <0x07824000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -1472,17 +1474,17 @@ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; mmc-ddr-1_8v; bus-width = <8>; non-removable; status = "disabled"; }; - sdhc_2: sdhci@7864000 { + sdhc_2: mmc@7864000 { compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07864900 0x11c>, <0x07864000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -1490,10 +1492,10 @@ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; bus-width = <4>; status = "disabled"; }; @@ -1788,8 +1790,8 @@ <&rpmpd MSM8916_VDDMX>; power-domain-names = "cx", "mx"; - qcom,state = <&wcnss_smp2p_out 0>; - qcom,state-names = "stop"; + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop"; pinctrl-names = "default"; pinctrl-0 = <&wcnss_pin_a>; @@ -1858,6 +1860,8 @@ compatible = "qcom,msm8916-a53pll"; reg = <0x0b016000 0x40>; #clock-cells = <0>; + clocks = <&xo_board>; + clock-names = "xo"; }; timer@b020000 { diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index ffc3ec2cd3bc..8416a45ca4fd 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -215,7 +215,7 @@ firmware { scm: scm { - compatible = "qcom,scm-msm8953"; + compatible = "qcom,scm-msm8953", "qcom,scm"; clocks = <&gcc GCC_CRYPTO_CLK>, <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>; @@ -795,7 +795,7 @@ }; }; - sdhc_1: sdhci@7824900 { + sdhc_1: mmc@7824900 { compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; reg = <0x7824900 0x500>, <0x7824000 0x800>; @@ -855,7 +855,7 @@ }; }; - sdhc_2: sdhci@7864900 { + sdhc_2: mmc@7864900 { compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; reg = <0x7864900 0x500>, <0x7864000 0x800>; diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts index afa91ca9a3dc..cbe11c060df9 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -51,13 +51,11 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@0 { + button { label = "Volume Up"; gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; linux,input-type = <1>; diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi index cc038f9b641f..61ec905025b0 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi @@ -64,7 +64,7 @@ compatible = "gpio-keys"; autorepeat; - volupkey { + volup-key { label = "Volume Up"; gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -73,7 +73,7 @@ debounce-interval = <15>; }; - camsnapkey { + camsnap-key { label = "Camera Snapshot"; gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -82,7 +82,7 @@ debounce-interval = <15>; }; - camfocuskey { + camfocus-key { label = "Camera Focus"; gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -100,7 +100,7 @@ label = "GPIO Hall Effect Sensor"; - hall-front-sensor { + event-hall-front-sensor { label = "Hall Effect Front Sensor"; gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; linux,input-type = <EV_SW>; @@ -108,7 +108,7 @@ linux,can-disable; }; - hall-back-sensor { + event-hall-back-sensor { label = "Hall Effect Back Sensor"; gpios = <&tlmm 75 GPIO_ACTIVE_HIGH>; linux,input-type = <EV_SW>; @@ -470,7 +470,7 @@ }; &pm8994_gpios { - bt_en_gpios: bt_en_gpios { + bt_en_gpios: bt-en-gpios-state { pinconf { pins = "gpio19"; function = PMIC_GPIO_FUNC_NORMAL; @@ -481,7 +481,7 @@ }; }; - divclk4_pin_a: divclk4 { + divclk4_pin_a: divclk4-state { pinconf { pins = "gpio18"; function = PMIC_GPIO_FUNC_FUNC2; @@ -519,21 +519,24 @@ * TODO: remove once a driver is available * TODO: add VBUS GPIO 5 */ - hd3ss460_pol: pol_low { + hd3ss460_pol: pol-low-state { pins = "gpio8"; - drive-strength = <3>; + function = PMIC_GPIO_FUNC_NORMAL; + qcom,drive-strength = <3>; bias-pull-down; }; - hd3ss460_amsel: amsel_high { + hd3ss460_amsel: amsel-high-state { pins = "gpio9"; - drive-strength = <1>; + function = PMIC_GPIO_FUNC_NORMAL; + qcom,drive-strength = <1>; bias-pull-up; }; - hd3ss460_en: en_high { + hd3ss460_en: en-high-state { pins = "gpio10"; - drive-strength = <1>; + function = PMIC_GPIO_FUNC_NORMAL; + qcom,drive-strength = <1>; bias-pull-up; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi index e5a45af0bd12..f430d797196f 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -27,13 +27,11 @@ /* Kitakami firmware doesn't support PSCI */ /delete-node/ psci; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@0 { + button-0 { label = "Volume Down"; gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -42,7 +40,7 @@ debounce-interval = <15>; }; - button@1 { + button-1 { label = "Volume Up"; gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -51,7 +49,7 @@ debounce-interval = <15>; }; - button@2 { + button-2 { label = "Camera Snapshot"; gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -60,7 +58,7 @@ debounce-interval = <15>; }; - button@3 { + button-3 { label = "Camera Focus"; gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>; linux,input-type = <1>; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 1ac2913b182c..8bc6c070e306 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -461,7 +461,7 @@ }; }; - sdhc1: sdhci@f9824900 { + sdhc1: mmc@f9824900 { compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -470,10 +470,10 @@ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; @@ -484,7 +484,7 @@ status = "disabled"; }; - sdhc2: sdhci@f98a4900 { + sdhc2: mmc@f98a4900 { compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -493,10 +493,10 @@ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; @@ -1069,11 +1069,12 @@ <600000000>; }; - ocmem: ocmem@fdd00000 { + ocmem: sram@fdd00000 { compatible = "qcom,msm8974-ocmem"; reg = <0xfdd00000 0x2000>, <0xfec00000 0x200000>; reg-names = "ctrl", "mem"; + ranges = <0 0xfec00000 0x200000>; clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, <&mmcc OCMEMCX_OCMEMNOC_CLK>; clock-names = "core", "iface"; diff --git a/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-dora.dts b/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-dora.dts deleted file mode 100644 index b018693600a5..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-dora.dts +++ /dev/null @@ -1,11 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> - */ - -#include "msm8996-sony-xperia-tone-dora.dts" -#include "pmi8996.dtsi" - -/ { - model = "Sony Xperia X Performance (PMI8996)"; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-kagura.dts b/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-kagura.dts deleted file mode 100644 index 842ea3cf557e..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-kagura.dts +++ /dev/null @@ -1,11 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> - */ - -#include "msm8996-sony-xperia-tone-kagura.dts" -#include "pmi8996.dtsi" - -/ { - model = "Sony Xperia XZ (PMI8996)"; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-keyaki.dts b/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-keyaki.dts deleted file mode 100644 index b3f9062da4b0..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8996-pmi8996-sony-xperia-tone-keyaki.dts +++ /dev/null @@ -1,11 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> - */ - -#include "msm8996-sony-xperia-tone-keyaki.dts" -#include "pmi8996.dtsi" - -/ { - model = "Sony Xperia XZs (PMI8996)"; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi index ca3c633f5a45..e165b5e890a0 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -8,6 +8,7 @@ #include "msm8996.dtsi" #include "pm8994.dtsi" #include "pmi8994.dtsi" +#include "pmi8996.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> @@ -20,7 +21,6 @@ / { qcom,msm-id = <246 0x30001>; /* MSM8996 V3.1 (Final) */ - qcom,pmic-id = <0x20009 0x2000a 0 0>; /* PM8994 + PMI8994 */ qcom,board-id = <8 0>; chosen { @@ -42,11 +42,6 @@ ecc-size = <16>; }; - cont_splash_mem: memory@83401000 { - reg = <0 0x83401000 0 0x23ff000>; - no-map; - }; - adsp_mem: adsp@8ea00000 { reg = <0x0 0x8ea00000 0x0 0x1a00000>; no-map; @@ -247,14 +242,14 @@ * probably a reason for it, and just to be on the safe side, we follow suit. */ pm8994_gpios_defaults: pm8994-gpios-default-state { - pm8994-gpio1-nc { + pm8994-gpio1-nc-pins { pins = "gpio1"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; bias-high-impedance; }; - vol-down-n { + vol-down-n-pins { pins = "gpio2"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -264,7 +259,7 @@ power-source = <PM8994_GPIO_S4>; }; - vol-up-n { + vol-up-n-pins { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -273,7 +268,7 @@ power-source = <PM8994_GPIO_S4>; }; - camera-snapshot-n { + camera-snapshot-n-pins { pins = "gpio4"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -283,7 +278,7 @@ power-source = <PM8994_GPIO_S4>; }; - camera-focus-n { + camera-focus-n-pins { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -293,7 +288,7 @@ power-source = <PM8994_GPIO_S4>; }; - pm8994-gpio6-nc { + pm8994-gpio6-nc-pins { pins = "gpio6"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -301,7 +296,7 @@ power-source = <PM8994_GPIO_VPH>; }; - nfc-download { + nfc-download-pins { pins = "gpio7"; function = PMIC_GPIO_FUNC_NORMAL; output-low; @@ -311,7 +306,7 @@ power-source = <PM8994_GPIO_S4>; }; - pm8994-gpio8-nc { + pm8994-gpio8-nc-pins { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; output-low; @@ -321,7 +316,7 @@ power-source = <PM8994_GPIO_VPH>; }; - pm8994-gpio9-nc { + pm8994-gpio9-nc-pins { pins = "gpio9"; function = PMIC_GPIO_FUNC_NORMAL; output-high; @@ -331,7 +326,7 @@ power-source = <PM8994_GPIO_VPH>; }; - nfc-clock { + nfc-clock-pins { pins = "gpio10"; function = PMIC_GPIO_FUNC_NORMAL; input-enable; @@ -341,7 +336,7 @@ power-source = <PM8994_GPIO_S4>; }; - pm8994-gpio11-nc { + pm8994-gpio11-nc-pins { pins = "gpio11"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -349,7 +344,7 @@ power-source = <PM8994_GPIO_VPH>; }; - pm8994-gpio12-nc { + pm8994-gpio12-nc-pins { pins = "gpio12"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -357,7 +352,7 @@ power-source = <PM8994_GPIO_VPH>; }; - ear-enable { + ear-enable-pins { pins = "gpio13"; function = PMIC_GPIO_FUNC_NORMAL; output-high; @@ -367,7 +362,7 @@ power-source = <PM8994_GPIO_S4>; }; - pm8994-gpio14-nc { + pm8994-gpio14-nc-pins { pins = "gpio14"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -377,7 +372,7 @@ power-source = <PM8994_GPIO_VPH>; }; - pm-divclk1-gpio { + pm-divclk1-gpio-pins { pins = "gpio15"; function = "func1"; output-high; @@ -387,13 +382,13 @@ power-source = <PM8994_GPIO_VPH>; }; - pmi-clk-gpio { + pmi-clk-gpio-pins { pins = "gpio16"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; }; - pm8994-gpio17-nc { + pm8994-gpio17-nc-pins { pins = "gpio17"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -401,7 +396,7 @@ power-source = <PM8994_GPIO_VPH>; }; - rome-sleep { + rome-sleep-pins { pins = "gpio18"; function = PMIC_GPIO_FUNC_FUNC2; output-low; @@ -411,7 +406,7 @@ power-source = <PM8994_GPIO_S4>; }; - pm8994-gpio19-nc { + pm8994-gpio19-nc-pins { pins = "gpio19"; function = PMIC_GPIO_FUNC_NORMAL; output-low; @@ -421,7 +416,7 @@ power-source = <PM8994_GPIO_VPH>; }; - pm8994-gpio22-nc { + pm8994-gpio22-nc-pins { pins = "gpio22"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -446,34 +441,34 @@ "RF_ID"; pm8994_mpps_defaults: pm8994-mpps-default-state { - lcd-id_adc-mpp { + lcd-id_adc-mpp-pins { pins = "mpp2"; function = "analog"; input-enable; qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH6>; }; - pm-mpp4-nc { + pm-mpp4-nc-pins { pins = "mpp4"; function = "digital"; bias-high-impedance; power-source = <PM8994_GPIO_VPH>; }; - flash-therm-mpp { + flash-therm-mpp-pins { pins = "mpp5"; function = "analog"; input-enable; qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>; }; - mpp6-nc { + mpp6-nc-pins { pins = "mpp6"; function = "digital"; bias-high-impedance; }; - rf-id-mpp { + rf-id-mpp-pins { pins = "mpp8"; function = "analog"; input-enable; @@ -504,7 +499,7 @@ "NC"; pmi8994_gpios_defaults: pmi8994-gpios-default-state { - vib-ldo-en-gpio { + vib-ldo-en-gpio-pins { pins = "gpio1"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -513,7 +508,7 @@ power-source = <PM8994_GPIO_S4>; }; - pmi-gpio2-nc { + pmi-gpio2-nc-pins { pins = "gpio2"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -523,7 +518,7 @@ power-source = <PM8994_GPIO_VPH>; }; - pmi-gpio3-nc { + pmi-gpio3-nc-pins { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -533,7 +528,7 @@ power-source = <PM8994_GPIO_VPH>; }; - pmi-gpio4-nc { + pmi-gpio4-nc-pins { pins = "gpio4"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -542,7 +537,7 @@ power-source = <PM8994_GPIO_S4>; }; - pmi-gpio5-nc { + pmi-gpio5-nc-pins { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -551,7 +546,7 @@ power-source = <PM8994_GPIO_S4>; }; - pmi-gpio6-nc { + pmi-gpio6-nc-pins { pins = "gpio6"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -560,7 +555,7 @@ power-source = <PM8994_GPIO_S4>; }; - pmi-gpio7-nc { + pmi-gpio7-nc-pins { pins = "gpio7"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -569,7 +564,7 @@ power-source = <PM8994_GPIO_S4>; }; - pmi-gpio8-nc { + pmi-gpio8-nc-pins { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -578,13 +573,13 @@ power-source = <PM8994_GPIO_S4>; }; - usb-switch-sel { + usb-switch-sel-pins { pins = "gpio9"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; }; - pmi-gpio10-nc { + pmi-gpio10-nc-pins { pins = "gpio10"; function = PMIC_GPIO_FUNC_NORMAL; output-low; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index a7090befc16f..627649979891 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -38,10 +38,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - vol_up { + key-vol-up { label = "Volume Up"; gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; @@ -49,7 +49,7 @@ debounce-interval = <15>; }; - dome { + key-dome { label = "Home"; gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; @@ -608,7 +608,7 @@ }; &pm8994_gpios { - wlan_en_default: wlan-en-default { + wlan_en_default: wlan-en-state { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; output-low; @@ -617,7 +617,7 @@ bias-disable; }; - rome_enable_default: rome-enable-default { + rome_enable_default: rome-enable-state { pins = "gpio9"; function = PMIC_GPIO_FUNC_NORMAL; output-high; @@ -625,7 +625,7 @@ power-source = <PM8994_GPIO_VPH>; }; - divclk1_default: divclk1_default { + divclk1_default: divclk1-state { pins = "gpio15"; function = PMIC_GPIO_FUNC_FUNC1; bias-disable; @@ -633,7 +633,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; }; - divclk4_pin_a: divclk4 { + divclk4_pin_a: divclk4-state { pins = "gpio18"; function = PMIC_GPIO_FUNC_FUNC2; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts index 22978d06f85b..25f30ec277c1 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -156,7 +156,7 @@ &sound { compatible = "qcom,apq8096-sndcard"; model = "gemini"; - audio-routing = "RX_BIAS", "MCLK", + audio-routing = "RX_BIAS", "MCLK", "MM_DL1", "MultiMedia1 Playback", "MM_DL2", "MultiMedia2 Playback", "MultiMedia3 Capture", "MM_UL3"; @@ -257,7 +257,7 @@ "UIM_BATT_ALARM", /* GPIO_21 */ "NC"; /* GPIO_22 */ - divclk2_pin_a: divclk2 { + divclk2_pin_a: divclk2-state { pins = "gpio16"; function = PMIC_GPIO_FUNC_FUNC2; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts new file mode 100644 index 000000000000..ff4673ee9e81 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts @@ -0,0 +1,414 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Alec Su <ae40515@yahoo.com.tw> + */ + +/dts-v1/; + +#include "msm8996-xiaomi-common.dtsi" +#include "pmi8996.dtsi" +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> + +/ { + model = "Xiaomi Mi 5s Plus"; + compatible = "xiaomi,natrium", "qcom,msm8996"; + chassis-type = "handset"; + qcom,msm-id = <305 0x10000>; + qcom,board-id = <47 0>; +}; + +&adsp_pil { + firmware-name = "qcom/msm8996/natrium/adsp.mbn"; +}; + +&blsp2_i2c6 { + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vdd_3v2_tp>; + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <5>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&touchscreen_default>; + pinctrl-1 = <&touchscreen_sleep>; + }; +}; + +&dsi0 { + status = "okay"; + + vdda-supply = <&vreg_l2a_1p25>; + vcca-supply = <&vreg_l28a_0p925>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; + pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; + + panel: panel@0 { + compatible = "jdi,fhd-r63452"; + reg = <0>; + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + backlight = <&pmi8994_wled>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/natrium/a530_zap.mbn"; + }; +}; + +&mss_pil { + firmware-name = "qcom/msm8996/natrium/mba.mbn", + "qcom/msm8996/natrium/modem.mbn"; +}; + +&pmi8994_wled { + status = "okay"; + + qcom,enabled-strings = <0 1>; + qcom,switching-freq = <600>; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&slpi_pil { + firmware-name = "qcom/msm8996/natrium/slpi.mbn"; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "natrium"; + audio-routing = "RX_BIAS", "MCLK"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 6>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 1>; + }; + }; +}; + +&venus { + firmware-name = "qcom/msm8996/natrium/venus.mbn"; +}; + +&rpm_requests { + pm8994-regulators { + vreg_l3a_0p875: l3 { + regulator-name = "vreg_l3a_0p875"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + }; + vreg_l11a_1p1: l11 { + regulator-name = "vreg_l11a_1p1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l18a_2p8: l18 { + regulator-name = "vreg_l18a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l29a_2p8: l29 { + regulator-name = "vreg_l29a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; + +&pm8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "VOL_UP_N", /* GPIO_2 */ + "SPKR_ID", /* GPIO_3 */ + "PWM_HAPTICS", /* GPIO_4 */ + "INFARED_DRV", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "KEYPAD_LED_EN_A", /* GPIO_7 */ + "WL_EN", /* GPIO_8 */ + "3P3_ENABLE", /* GPIO_9 */ + "NC", /* GPIO_10 */ + "NC", /* GPIO_11 */ + "NC", /* GPIO_12 */ + "NC", /* GPIO_13 */ + "NC", /* GPIO_14 */ + "DIVCLK1_CDC", /* GPIO_15 */ + "DIVCLK2_HAPTICS", /* GPIO_16 */ + "NC", /* GPIO_17 */ + "32KHz_CLK_IN", /* GPIO_18 */ + "BT_EN", /* GPIO_19 */ + "PMIC_SLB", /* GPIO_20 */ + "UIM_BATT_ALARM", /* GPIO_21 */ + "NC"; /* GPIO_22 */ +}; + +&pm8994_mpps { + gpio-line-names = + "NC", /* MPP_1 */ + "CCI_TIMER1", /* MPP_2 */ + "PMIC_SLB", /* MPP_3 */ + "EXT_FET_WLED_PWR_EN_N",/* MPP_4 */ + "NC", /* MPP_5 */ + "NC", /* MPP_6 */ + "NC", /* MPP_7 */ + "NC"; /* MPP_8 */ +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "SPKR_PA_EN", /* GPIO_2 */ + "NC", /* GPIO_3 */ + "NC", /* GPIO_4 */ + "NC", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "NC", /* GPIO_7 */ + "NC", /* GPIO_8 */ + "NC", /* GPIO_9 */ + "NC"; /* GPIO_10 */ +}; + +&tlmm { + gpio-line-names = + "ESE_SPI_MOSI", /* GPIO_0 */ + "ESE_SPI_MISO", /* GPIO_1 */ + "NC", /* GPIO_2 */ + "ESE_SPI_CLK", /* GPIO_3 */ + "MSM_UART_TX", /* GPIO_4 */ + "MSM_UART_RX", /* GPIO_5 */ + "NFC_I2C_SDA", /* GPIO_6 */ + "NFC_I2C_SCL", /* GPIO_7 */ + "LCD0_RESET_N", /* GPIO_8 */ + "NFC_IRQ", /* GPIO_9 */ + "LCD_TE", /* GPIO_10 */ + "LCD_ID_DET1", /* GPIO_11 */ + "NFC_DISABLE", /* GPIO_12 */ + "CAM_MCLK0", /* GPIO_13 */ + "CAM_MCLK1", /* GPIO_14 */ + "CAM_MCLK2", /* GPIO_15 */ + "ESE_PWR_REQ", /* GPIO_16 */ + "CCI_I2C_SDA0", /* GPIO_17 */ + "CCI_I2C_SCL0", /* GPIO_18 */ + "CCI_I2C_SDA1", /* GPIO_19 */ + "CCI_I2C_SCL1", /* GPIO_20 */ + "NFC_DWL_REQ", /* GPIO_21 */ + "CCI_TIMER1", /* GPIO_22 */ + "WEBCAM1_RESET_N", /* GPIO_23 */ + "ESE_IRQ", /* GPIO_24 */ + "NC", /* GPIO_25 */ + "WEBCAM1_STANDBY", /* GPIO_26 */ + "NC", /* GPIO_27 */ + "NC", /* GPIO_28 */ + "NC", /* GPIO_29 */ + "CAM_VDD_1P2_EN_2", /* GPIO_30 */ + "CAM_RESET_0", /* GPIO_31 */ + "CAM_RESET_1", /* GPIO_32 */ + "NC", /* GPIO_33 */ + "NC", /* GPIO_34 */ + "PCI_E0_RST_N", /* GPIO_35 */ + "PCI_E0_CLKREQ_N", /* GPIO_36 */ + "PCI_E0_WAKE", /* GPIO_37 */ + "CHARGER_INT", /* GPIO_38 */ + "CHARGER_RESET", /* GPIO_39 */ + "NC", /* GPIO_40 */ + "QCA_UART_TXD", /* GPIO_41 */ + "QCA_UART_RXD", /* GPIO_42 */ + "QCA_UART_CTS", /* GPIO_43 */ + "QCA_UART_RTS", /* GPIO_44 */ + "MAWC_UART_TX", /* GPIO_45 */ + "MAWC_UART_RX", /* GPIO_46 */ + "NC", /* GPIO_47 */ + "NC", /* GPIO_48 */ + "NC", /* GPIO_49 */ + "FP_SPI_RST", /* GPIO_50 */ + "TYPEC_I2C_SDA", /* GPIO_51 */ + "TYPEC_I2C_SCL", /* GPIO_52 */ + "CODEC_INT2_N", /* GPIO_53 */ + "CODEC_INT1_N", /* GPIO_54 */ + "APPS_I2C7_SDA", /* GPIO_55 */ + "APPS_I2C7_SCL", /* GPIO_56 */ + "FORCE_USB_BOOT", /* GPIO_57 */ + "NC", /* GPIO_58 */ + "NC", /* GPIO_59 */ + "NC", /* GPIO_60 */ + "NC", /* GPIO_61 */ + "ESE_RSTN", /* GPIO_62 */ + "TYPEC_INT", /* GPIO_63 */ + "CODEC_RESET_N", /* GPIO_64 */ + "PCM_CLK", /* GPIO_65 */ + "PCM_SYNC", /* GPIO_66 */ + "PCM_DIN", /* GPIO_67 */ + "PCM_DOUT", /* GPIO_68 */ + "CDC_44K1_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "LDO_5V_IN_EN", /* GPIO_73 */ + "TYPEC_EN_N", /* GPIO_74 */ + "NC", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "NC", /* GPIO_77 */ + "NC", /* GPIO_78 */ + "NC", /* GPIO_79 */ + "SENSOR_RESET_N", /* GPIO_80 */ + "FP_SPI_MOSI", /* GPIO_81 */ + "FP_SPI_MISO", /* GPIO_82 */ + "FP_SPI_CS_N", /* GPIO_83 */ + "FP_SPI_CLK", /* GPIO_84 */ + "NC", /* GPIO_85 */ + "CAM_VDD_1P2_EN", /* GPIO_86 */ + "MSM_TS_I2C_SDA", /* GPIO_87 */ + "MSM_TS_I2C_SCL", /* GPIO_88 */ + "TS_RESOUT_N", /* GPIO_89 */ + "ESE_SPI_CS_N", /* GPIO_90 */ + "NC", /* GPIO_91 */ + "CAM2_AVDD_EN", /* GPIO_92 */ + "CAM2_VCM_EN", /* GPIO_93 */ + "NC", /* GPIO_94 */ + "NC", /* GPIO_95 */ + "NC", /* GPIO_96 */ + "GRFC_0", /* GPIO_97 */ + "GRFC_1", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "GRFC_3", /* GPIO_100 */ + "GRFC_4", /* GPIO_101 */ + "GRFC_5", /* GPIO_102 */ + "NC", /* GPIO_103 */ + "GRFC_7", /* GPIO_104 */ + "UIM2_DATA", /* GPIO_105 */ + "UIM2_CLK", /* GPIO_106 */ + "UIM2_RESET", /* GPIO_107 */ + "UIM2_PRESENT", /* GPIO_108 */ + "UIM1_DATA", /* GPIO_109 */ + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", /* GPIO_111 */ + "UIM1_PRESENT", /* GPIO_112 */ + "UIM_BATT_ALARM", /* GPIO_113 */ + "GRFC_8", /* GPIO_114 */ + "GRFC_9", /* GPIO_115 */ + "TX_GTR_THRES", /* GPIO_116 */ + "ACCEL_INT", /* GPIO_117 */ + "GYRO_INT", /* GPIO_118 */ + "COMPASS_INT", /* GPIO_119 */ + "PROXIMITY_INT_N", /* GPIO_120 */ + "FP_IRQ", /* GPIO_121 */ + "P_SENSE", /* GPIO_122 */ + "HALL_INTR2", /* GPIO_123 */ + "HALL_INTR1", /* GPIO_124 */ + "TS_INT_N", /* GPIO_125 */ + "NC", /* GPIO_126 */ + "GRFC_11", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "EXT_GPS_LNA_EN", /* GPIO_129 */ + "NC", /* GPIO_130 */ + "LCD_ID_DET2", /* GPIO_131 */ + "LCD_TE2", /* GPIO_132 */ + "GRFC_14", /* GPIO_133 */ + "GSM_TX2_PHASE_D", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "GRFC_15", /* GPIO_136 */ + "RFFE3_DATA", /* GPIO_137 */ + "RFFE3_CLK", /* GPIO_138 */ + "NC", /* GPIO_139 */ + "NC", /* GPIO_140 */ + "RFFE5_DATA", /* GPIO_141 */ + "RFFE5_CLK", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "COEX_UART_TX", /* GPIO_144 */ + "COEX_UART_RX", /* GPIO_145 */ + "RFFE2_DATA", /* GPIO_146 */ + "RFFE2_CLK", /* GPIO_147 */ + "RFFE1_DATA", /* GPIO_148 */ + "RFFE1_CLK"; /* GPIO_149 */ + + touchscreen_default: touchscreen-default { + pins = "gpio89", "gpio125"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; + + touchscreen_sleep: touchscreen-sleep { + pins = "gpio89", "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts index 1e2dd6763ad1..30a9e4bed4af 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts @@ -137,7 +137,7 @@ &sound { compatible = "qcom,apq8096-sndcard"; model = "scorpio"; - audio-routing = "RX_BIAS", "MCLK"; + audio-routing = "RX_BIAS", "MCLK"; mm1-dai-link { link-name = "MultiMedia1"; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 9932186f7ceb..742eac4ce9b3 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/clock/qcom,gcc-msm8996.h> #include <dt-bindings/clock/qcom,mmcc-msm8996.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/interconnect/qcom,msm8996.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/thermal/thermal.h> @@ -357,7 +358,7 @@ firmware { scm { - compatible = "qcom,scm-msm8996"; + compatible = "qcom,scm-msm8996", "qcom,scm"; qcom,dload-mode = <&tcsr 0x13000>; }; }; @@ -463,6 +464,8 @@ rpmcc: qcom,rpmcc { compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc"; #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; }; rpmpd: power-controller { @@ -585,12 +588,12 @@ ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; - pcie_phy: phy@34000 { + pcie_phy: phy-wrapper@34000 { compatible = "qcom,msm8996-qmp-pcie-phy"; reg = <0x00034000 0x488>; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x00034000 0x4000>; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>, @@ -601,46 +604,55 @@ <&gcc GCC_PCIE_PHY_COM_BCR>, <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; reset-names = "phy", "common", "cfg"; + status = "disabled"; - pciephy_0: phy@35000 { - reg = <0x00035000 0x130>, - <0x00035200 0x200>, - <0x00035400 0x1dc>; - #phy-cells = <0>; + pciephy_0: phy@1000 { + reg = <0x1000 0x130>, + <0x1200 0x200>, + <0x1400 0x1dc>; - #clock-cells = <1>; - clock-output-names = "pcie_0_pipe_clk_src"; clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "pipe0"; resets = <&gcc GCC_PCIE_0_PHY_BCR>; reset-names = "lane0"; - }; - pciephy_1: phy@36000 { - reg = <0x00036000 0x130>, - <0x00036200 0x200>, - <0x00036400 0x1dc>; + #clock-cells = <0>; + clock-output-names = "pcie_0_pipe_clk_src"; + #phy-cells = <0>; + }; + + pciephy_1: phy@2000 { + reg = <0x2000 0x130>, + <0x2200 0x200>, + <0x2400 0x1dc>; - clock-output-names = "pcie_1_pipe_clk_src"; clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; clock-names = "pipe1"; resets = <&gcc GCC_PCIE_1_PHY_BCR>; reset-names = "lane1"; - }; - pciephy_2: phy@37000 { - reg = <0x00037000 0x130>, - <0x00037200 0x200>, - <0x00037400 0x1dc>; + #clock-cells = <0>; + clock-output-names = "pcie_1_pipe_clk_src"; + #phy-cells = <0>; + }; + + pciephy_2: phy@3000 { + reg = <0x3000 0x130>, + <0x3200 0x200>, + <0x3400 0x1dc>; - clock-output-names = "pcie_2_pipe_clk_src"; clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; clock-names = "pipe2"; resets = <&gcc GCC_PCIE_2_PHY_BCR>; reset-names = "lane2"; + + #clock-cells = <0>; + clock-output-names = "pcie_2_pipe_clk_src"; + + #phy-cells = <0>; }; }; @@ -650,7 +662,7 @@ }; qfprom@74000 { - compatible = "qcom,qfprom"; + compatible = "qcom,msm8996-qfprom", "qcom,qfprom"; reg = <0x00074000 0x8ff>; #address-cells = <1>; #size-cells = <1>; @@ -687,8 +699,31 @@ clocks = <&rpmcc RPM_SMD_BB_CLK1>, <&rpmcc RPM_SMD_LN_BB_CLK>, - <&sleep_clk>; - clock-names = "cxo", "cxo2", "sleep_clk"; + <&sleep_clk>, + <&pciephy_0>, + <&pciephy_1>, + <&pciephy_2>, + <&ssusb_phy_0>, + <0>, <0>, <0>; + clock-names = "cxo", + "cxo2", + "sleep_clk", + "pcie_0_pipe_clk_src", + "pcie_1_pipe_clk_src", + "pcie_2_pipe_clk_src", + "usb3_phy_pipe_clk_src", + "ufs_rx_symbol_0_clk_src", + "ufs_rx_symbol_1_clk_src", + "ufs_tx_symbol_0_clk_src"; + }; + + bimc: interconnect@408000 { + compatible = "qcom,msm8996-bimc"; + reg = <0x00408000 0x5a000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; }; tsens0: thermal-sensor@4a9000 { @@ -735,6 +770,74 @@ dma-names = "rx", "tx"; }; + cnoc: interconnect@500000 { + compatible = "qcom,msm8996-cnoc"; + reg = <0x00500000 0x1000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_CNOC_CLK>, + <&rpmcc RPM_SMD_CNOC_A_CLK>; + }; + + snoc: interconnect@524000 { + compatible = "qcom,msm8996-snoc"; + reg = <0x00524000 0x1c000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + + a0noc: interconnect@543000 { + compatible = "qcom,msm8996-a0noc"; + reg = <0x00543000 0x6000>; + #interconnect-cells = <1>; + clock-names = "aggre0_snoc_axi", + "aggre0_cnoc_ahb", + "aggre0_noc_mpu_cfg"; + clocks = <&gcc GCC_AGGRE0_SNOC_AXI_CLK>, + <&gcc GCC_AGGRE0_CNOC_AHB_CLK>, + <&gcc GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK>; + power-domains = <&gcc AGGRE0_NOC_GDSC>; + }; + + a1noc: interconnect@562000 { + compatible = "qcom,msm8996-a1noc"; + reg = <0x00562000 0x5000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>, + <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>; + }; + + a2noc: interconnect@583000 { + compatible = "qcom,msm8996-a2noc"; + reg = <0x00583000 0x7000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, + <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>; + }; + + mnoc: interconnect@5a4000 { + compatible = "qcom,msm8996-mnoc"; + reg = <0x005a4000 0x1c000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a", "iface"; + clocks = <&rpmcc RPM_SMD_MMAXI_CLK>, + <&rpmcc RPM_SMD_MMAXI_A_CLK>, + <&mmcc AHB_CLK_SRC>; + }; + + pnoc: interconnect@5c0000 { + compatible = "qcom,msm8996-pnoc"; + reg = <0x005c0000 0x3000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_PCNOC_A_CLK>; + }; + tcsr_mutex_regs: syscon@740000 { compatible = "syscon"; reg = <0x00740000 0x40000>; @@ -751,6 +854,22 @@ #reset-cells = <1>; #power-domain-cells = <1>; reg = <0x008c0000 0x40000>; + clocks = <&xo_board>, + <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>, + <&gcc GPLL0>, + <&dsi0_phy 1>, + <&dsi0_phy 0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "gcc_mmss_noc_cfg_ahb_clk", + "gpll0", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte", + "hdmipll"; assigned-clocks = <&mmcc MMPLL9_PLL>, <&mmcc MMPLL1_PLL>, <&mmcc MMPLL3_PLL>, @@ -779,8 +898,9 @@ interrupt-controller; #interrupt-cells = <1>; - clocks = <&mmcc MDSS_AHB_CLK>; - clock-names = "iface"; + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_MDP_CLK>; + clock-names = "iface", "core"; #address-cells = <1>; #size-cells = <1>; @@ -814,6 +934,11 @@ assigned-clock-rates = <300000000>, <19200000>; + interconnects = <&mnoc MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>, + <&mnoc MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>, + <&mnoc MASTER_ROTATOR &bimc SLAVE_EBI_CH0>; + interconnect-names = "mdp0-mem", "mdp1-mem", "rotator-mem"; + ports { #address-cells = <1>; #size-cells = <0>; @@ -831,6 +956,13 @@ remote-endpoint = <&dsi0_in>; }; }; + + port@2 { + reg = <2>; + mdp5_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; }; }; @@ -856,6 +988,8 @@ "core_mmss", "pixel", "core"; + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; phys = <&dsi0_phy>; phy-names = "dsi"; @@ -900,6 +1034,74 @@ status = "disabled"; }; + dsi1: dsi@996000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x00996000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE1_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>, + <&mmcc MDSS_PCLK1_CLK>, + <&mmcc MDSS_ESC1_CLK>; + clock-names = "mdp_core", + "byte", + "iface", + "bus", + "core_mmss", + "pixel", + "core"; + assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&mdp5_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: dsi-phy@996400 { + compatible = "qcom,dsi-phy-14nm"; + reg = <0x00996400 0x100>, + <0x00996500 0x300>, + <0x00996800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>; + clock-names = "iface", "ref"; + status = "disabled"; + }; + hdmi: hdmi-tx@9a0000 { compatible = "qcom,hdmi-tx-8996"; reg = <0x009a0000 0x50c>, @@ -925,7 +1127,6 @@ "extp"; phys = <&hdmi_phy>; - phy-names = "hdmi_phy"; #sound-dai-cells = <1>; status = "disabled"; @@ -988,6 +1189,9 @@ "mem", "mem_iface"; + interconnects = <&bimc MASTER_GRAPHICS_3D &bimc SLAVE_EBI_CH0>; + interconnect-names = "gfx-mem"; + power-domains = <&mmcc GPU_GX_GDSC>; iommus = <&adreno_smmu 0>; @@ -1001,7 +1205,7 @@ #cooling-cells = <2>; gpu_opp_table: opp-table { - compatible ="operating-points-v2"; + compatible = "operating-points-v2"; /* * 624Mhz and 560Mhz are only available on speed @@ -1623,7 +1827,7 @@ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_AXI_CLK>; - clock-names = "pipe", + clock-names = "pipe", "aux", "cfg", "bus_master", @@ -1637,7 +1841,7 @@ bus-range = <0x00 0xff>; num-lanes = <1>; - status = "disabled"; + status = "disabled"; reg = <0x00608000 0x2000>, <0x0d000000 0xf1d>, @@ -1677,7 +1881,7 @@ <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, <&gcc GCC_PCIE_1_SLV_AXI_CLK>; - clock-names = "pipe", + clock-names = "pipe", "aux", "cfg", "bus_master", @@ -1727,7 +1931,7 @@ <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, <&gcc GCC_PCIE_2_SLV_AXI_CLK>; - clock-names = "pipe", + clock-names = "pipe", "aux", "cfg", "bus_master", @@ -2013,6 +2217,9 @@ <&mmcc VIDEO_AXI_CLK>, <&mmcc VIDEO_MAXI_CLK>; clock-names = "core", "iface", "bus", "mbus"; + interconnects = <&mnoc MASTER_VIDEO_P0 &bimc SLAVE_EBI_CH0>, + <&bimc MASTER_AMPSS_M0 &mnoc SLAVE_VENUS_CFG>; + interconnect-names = "video-mem", "cpu-cfg"; iommus = <&venus_smmu 0x00>, <&venus_smmu 0x01>, <&venus_smmu 0x0a>, @@ -2732,6 +2939,10 @@ <&gcc GCC_USB30_MASTER_CLK>; assigned-clock-rates = <19200000>, <120000000>; + interconnects = <&a2noc MASTER_USB3 &bimc SLAVE_EBI_CH0>, + <&bimc MASTER_AMPSS_M0 &snoc SLAVE_USB3>; + interconnect-names = "usb-ddr", "apps-usb"; + power-domains = <&gcc USB30_GDSC>; status = "disabled"; @@ -2769,7 +2980,7 @@ <0x07410600 0x1a8>; #phy-cells = <0>; - #clock-cells = <1>; + #clock-cells = <0>; clock-output-names = "usb3_phy_pipe_clk_src"; clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; clock-names = "pipe0"; @@ -2804,7 +3015,7 @@ status = "disabled"; }; - sdhc1: sdhci@7464900 { + sdhc1: mmc@7464900 { compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07464900 0x11c>, <0x07464000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -2817,6 +3028,7 @@ clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, <&rpmcc RPM_SMD_BB_CLK1>; + resets = <&gcc GCC_SDCC1_BCR>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc1_state_on>; @@ -2827,7 +3039,7 @@ status = "disabled"; }; - sdhc2: sdhci@74a4900 { + sdhc2: mmc@74a4900 { compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; reg = <0x074a4900 0x314>, <0x074a4000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -2840,6 +3052,7 @@ clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, <&rpmcc RPM_SMD_BB_CLK1>; + resets = <&gcc GCC_SDCC2_BCR>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc2_state_on>; @@ -3084,7 +3297,7 @@ compatible = "qcom,bam-v1.7.0"; qcom,controlled-remotely; reg = <0x09184000 0x32000>; - num-channels = <31>; + num-channels = <31>; interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; qcom,ee = <1>; @@ -3096,7 +3309,7 @@ reg = <0x091c0000 0x2C000>; reg-names = "ctrl"; interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&slimbam 3>, <&slimbam 4>, + dmas = <&slimbam 3>, <&slimbam 4>, <&slimbam 5>, <&slimbam 6>; dma-names = "rx", "tx", "tx2", "rx2"; #address-cells = <1>; @@ -3108,7 +3321,7 @@ tasha_ifd: tas-ifd { compatible = "slim217,1a0"; - reg = <0 0>; + reg = <0 0>; }; wcd9335: codec@1{ @@ -3116,17 +3329,17 @@ pinctrl-names = "default"; compatible = "slim217,1a0"; - reg = <1 0>; + reg = <1 0>; interrupt-parent = <&tlmm>; interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, <53 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "intr1", "intr2"; + interrupt-names = "intr1", "intr2"; interrupt-controller; #interrupt-cells = <1>; reset-gpios = <&tlmm 64 0>; - slim-ifc-dev = <&tasha_ifd>; + slim-ifc-dev = <&tasha_ifd>; #sound-dai-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts index e204b7050441..102f3e9a79a1 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts @@ -16,20 +16,22 @@ touchpad@15 { compatible = "hid-over-i2c"; - interrupt-parent = <&tlmm>; - interrupts = <0x7b IRQ_TYPE_LEVEL_LOW>; reg = <0x15>; - hid-descr-addr = <0x0001>; - pinctrl-names = "default"; pinctrl-0 = <&touchpad>; + + interrupt-parent = <&tlmm>; + interrupts = <123 IRQ_TYPE_LEVEL_LOW>; + + hid-descr-addr = <0x0001>; }; keyboard@3a { compatible = "hid-over-i2c"; - interrupt-parent = <&tlmm>; - interrupts = <0x25 IRQ_TYPE_LEVEL_LOW>; reg = <0x3a>; + interrupt-parent = <&tlmm>; + interrupts = <37 IRQ_TYPE_LEVEL_LOW>; + hid-descr-addr = <0x0001>; }; }; @@ -37,12 +39,3 @@ &sdhc2 { cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; }; - -&tlmm { - touchpad: touchpad { - config { - pins = "gpio123"; - bias-pull-up; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi index b3b352530d76..7928b8197474 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -8,13 +8,10 @@ */ #include "msm8998.dtsi" -#include "pm8998.dtsi" #include "pm8005.dtsi" +#include "pm8998.dtsi" / { - chosen { - }; - vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -37,6 +34,28 @@ }; }; +&blsp1_uart3_on { + rx { + /delete-property/ bias-disable; + /* + * Configure a pull-up on 45 (RX). This is needed to + * avoid garbage data when the TX pin of the Bluetooth + * module is in tri-state (module powered off or not + * driving the signal yet). + */ + bias-pull-up; + }; + + cts { + /delete-property/ bias-disable; + /* + * Configure a pull-down on 47 (CTS) to match the pull + * of the Bluetooth module. + */ + bias-pull-down; + }; +}; + /* * The laptop FW does not appear to support the retention state as it is * not advertised as enabled in ACPI, and enabling it in DT can cause boot @@ -74,6 +93,20 @@ cpu-idle-states = <&BIG_CPU_SLEEP_1>; }; +/* + * If EFIFB is used, enabling MMCC will cause important MMSS clocks to be cleaned + * up, because as far as Linux is concerned - they are unused. Disable it by default + * on clamshell devices, as it will break them, unless either simplefb is configured to + * hold a vote for these clocks, or panels are brought up properly, using drm/msm. + */ +&mmcc { + status = "disabled"; +}; + +&mmss_smmu { + status = "disabled"; +}; + &pcie0 { status = "okay"; }; @@ -82,20 +115,16 @@ status = "okay"; }; -&pm8005_lsid1 { - pm8005-regulators { - compatible = "qcom,pm8005-regulators"; +&pm8005_regulators { + vdd_s1-supply = <&vph_pwr>; - vdd_s1-supply = <&vph_pwr>; + pm8005_s1: s1 { /* VDD_GFX supply */ + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; - pm8005_s1: s1 { /* VDD_GFX supply */ - regulator-min-microvolt = <524000>; - regulator-max-microvolt = <1100000>; - regulator-enable-ramp-delay = <500>; - - /* hack until we rig up the gpu consumer */ - regulator-always-on; - }; + /* hack until we rig up the gpu consumer */ + regulator-always-on; }; }; @@ -143,127 +172,156 @@ regulator-min-microvolt = <1352000>; regulator-max-microvolt = <1352000>; }; + vreg_s4a_1p8: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-allow-set-load; }; + vreg_s5a_2p04: s5 { regulator-min-microvolt = <1904000>; regulator-max-microvolt = <2040000>; }; + vreg_s7a_1p025: s7 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <1028000>; }; + vreg_l1a_0p875: l1 { regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-allow-set-load; }; + vreg_l2a_1p2: l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-allow-set-load; }; + vreg_l3a_1p0: l3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; + vreg_l5a_0p8: l5 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <800000>; }; + vreg_l6a_1p8: l6 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <1808000>; }; + vreg_l7a_1p8: l7 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-allow-set-load; }; + vreg_l8a_1p2: l8 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; + vreg_l9a_1p8: l9 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l10a_1p8: l10 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l11a_1p0: l11 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; + vreg_l12a_1p8: l12 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l13a_2p95: l13 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l14a_1p88: l14 { regulator-min-microvolt = <1880000>; regulator-max-microvolt = <1880000>; }; + vreg_l15a_1p8: l15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l16a_2p7: l16 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2704000>; }; + vreg_l17a_1p3: l17 { regulator-min-microvolt = <1304000>; regulator-max-microvolt = <1304000>; regulator-allow-set-load; }; + vreg_l18a_2p7: l18 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2704000>; }; + vreg_l19a_3p0: l19 { regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3008000>; }; + vreg_l20a_2p95: l20 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; regulator-allow-set-load; }; + vreg_l21a_2p95: l21 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; regulator-allow-set-load; regulator-system-load = <800000>; }; + vreg_l22a_2p85: l22 { regulator-min-microvolt = <2864000>; regulator-max-microvolt = <2864000>; }; + vreg_l23a_3p3: l23 { regulator-min-microvolt = <3312000>; regulator-max-microvolt = <3312000>; }; + vreg_l24a_3p075: l24 { regulator-min-microvolt = <3088000>; regulator-max-microvolt = <3088000>; }; + vreg_l25a_3p3: l25 { regulator-min-microvolt = <3104000>; regulator-max-microvolt = <3312000>; regulator-allow-set-load; }; + vreg_l26a_1p2: l26 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; + vreg_l28_3p0: l28 { regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3008000>; @@ -278,7 +336,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - }; }; @@ -286,17 +343,6 @@ status = "okay"; }; -&tlmm { - gpio-reserved-ranges = <0 4>, <81 4>; - - touchpad: touchpad { - config { - pins = "gpio123"; - bias-pull-up; /* pull up */ - }; - }; -}; - &sdhc2 { status = "okay"; @@ -304,8 +350,17 @@ vqmmc-supply = <&vreg_l13a_2p95>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_on &sdc2_cd>; + pinctrl-1 = <&sdc2_off &sdc2_cd>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + touchpad: touchpad-pin { + pins = "gpio123"; + bias-pull-up; + }; }; &ufshc { @@ -341,26 +396,3 @@ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; }; - -/* PINCTRL - board-specific pinctrl */ -&blsp1_uart3_on { - rx { - /delete-property/ bias-disable; - /* - * Configure a pull-up on 45 (RX). This is needed to - * avoid garbage data when the TX pin of the Bluetooth - * module is in tri-state (module powered off or not - * driving the signal yet). - */ - bias-pull-up; - }; - - cts { - /delete-property/ bias-disable; - /* - * Configure a pull-down on 47 (CTS) to match the pull - * of the Bluetooth module. - */ - bias-pull-down; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts index dc5b9b274df3..429ba57e20f7 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -6,11 +6,13 @@ /dts-v1/; -#include "msm8998-mtp.dtsi" - #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "msm8998.dtsi" +#include "pm8005.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" / { model = "F(x)tec Pro1 (QX1000)"; @@ -18,6 +20,11 @@ chassis-type = "handset"; qcom,board-id = <0x02000b 0x10>; + aliases { + serial0 = &blsp2_uart1; + serial1 = &blsp1_uart3; + }; + /* * Until we hook up type-c detection, we * have to stick with this. But it works. @@ -33,7 +40,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hall_sensor1_default>; - hall-sensor1 { + event-hall-sensor1 { label = "Keyboard Hall Sensor"; gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; debounce-interval = <15>; @@ -49,7 +56,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_kb_pins_extra>; - home { + key-home { label = "Home"; gpios = <&tlmm 21 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; @@ -57,7 +64,7 @@ linux,can-disable; }; - super-l { + key-super-l { label = "Super Left"; gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; linux,code = <KEY_FN>; @@ -65,7 +72,7 @@ linux,can-disable; }; - super-r { + key-super-r { label = "Super Right"; gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; linux,code = <KEY_FN>; @@ -73,7 +80,7 @@ linux,can-disable; }; - shift { + key-shift { label = "Shift"; gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; linux,code = <KEY_RIGHTSHIFT>; @@ -81,7 +88,7 @@ linux,can-disable; }; - ctrl { + key-ctrl { label = "Ctrl"; gpios = <&tlmm 128 GPIO_ACTIVE_LOW>; linux,code = <KEY_LEFTCTRL>; @@ -89,7 +96,7 @@ linux,can-disable; }; - alt { + key-alt { label = "Alt"; gpios = <&tlmm 129 GPIO_ACTIVE_LOW>; linux,code = <KEY_LEFTALT>; @@ -101,12 +108,10 @@ gpio-keys { compatible = "gpio-keys"; label = "Side buttons"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>, <&cam_snapshot_pin_a>; - vol-up { + button-vol-up { label = "Volume Up"; gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; @@ -115,7 +120,7 @@ debounce-interval = <15>; }; - camera-snapshot { + button-camera-snapshot { label = "Camera Snapshot"; gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; @@ -123,7 +128,7 @@ debounce-interval = <15>; }; - camera-focus { + button-camera-focus { label = "Camera Focus"; gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; @@ -135,7 +140,7 @@ keyboard-leds { compatible = "gpio-leds"; - backlight { + led-0 { color = <LED_COLOR_ID_WHITE>; default-state = "off"; function = LED_FUNCTION_KBD_BACKLIGHT; @@ -144,7 +149,7 @@ retain-state-suspended; }; - caps-lock { + led-1 { color = <LED_COLOR_ID_YELLOW>; default-state = "off"; function = LED_FUNCTION_CAPSLOCK; @@ -187,10 +192,57 @@ pinctrl-0 = <&ts_vio_default>; regulator-always-on; }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&blsp1_uart3_on { + rx { + /delete-property/ bias-disable; + /* + * Configure a pull-up on 45 (RX). This is needed to + * avoid garbage data when the TX pin of the Bluetooth + * module is in tri-state (module powered off or not + * driving the signal yet). + */ + bias-pull-up; + }; + + cts { + /delete-property/ bias-disable; + /* + * Configure a pull-down on 47 (CTS) to match the pull + * of the Bluetooth module. + */ + bias-pull-down; + }; +}; + +&blsp2_uart1 { + status = "okay"; }; &blsp2_i2c1 { - status = "ok"; + status = "okay"; touchscreen@14 { compatible = "goodix,gt9286"; @@ -205,16 +257,93 @@ }; }; -&mmcc { - status = "ok"; +&etf { + status = "okay"; +}; + +&etm1 { + status = "okay"; +}; + +&etm2 { + status = "okay"; +}; + +&etm3 { + status = "okay"; +}; + +&etm4 { + status = "okay"; +}; + +&etm5 { + status = "okay"; +}; + +&etm6 { + status = "okay"; +}; + +&etm7 { + status = "okay"; +}; + +&etm8 { + status = "okay"; +}; + +&etr { + status = "okay"; }; -&mmss_smmu { - status = "ok"; +&funnel1 { + status = "okay"; +}; + +&funnel2 { + status = "okay"; +}; + +&funnel3 { + status = "okay"; +}; + +&funnel4 { + // FIXME: Figure out why clock late_initcall crashes the board with + // this enabled. + // status = "okay"; +}; + +&funnel5 { + // FIXME: Figure out why clock late_initcall crashes the board with + // this enabled. + // status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pm8005_regulators { + vdd_s1-supply = <&vph_pwr>; + + pm8005_s1: s1 { /* VDD_GFX supply */ + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + + /* Hack until we rig up the gpu consumer */ + regulator-always-on; + }; }; &pm8998_gpio { - vol_up_pin_a: vol-up-active { + vol_up_pin_a: vol-up-active-state { pins = "gpio6"; function = "normal"; bias-pull-up; @@ -222,7 +351,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - cam_focus_pin_a: cam-focus-btn-active { + cam_focus_pin_a: cam-focus-btn-active-state { pins = "gpio7"; function = "normal"; bias-pull-up; @@ -230,7 +359,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - cam_snapshot_pin_a: cam-snapshot-btn-active { + cam_snapshot_pin_a: cam-snapshot-btn-active-state { pins = "gpio8"; function = "normal"; bias-pull-up; @@ -249,6 +378,240 @@ }; }; +&qusb2phy { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&replicator1 { + status = "okay"; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vreg_bob>; + vdd_l10_l23_l25-supply = <&vreg_bob>; + vdd_l13_l19_l21-supply = <&vreg_bob>; + vdd_l16_l28-supply = <&vreg_bob>; + vdd_l18_l22-supply = <&vreg_bob>; + vdd_l20_l24-supply = <&vreg_bob>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <1808000>; + }; + + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l14a_1p88: l14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + }; + + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a_2p7: l18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l19a_3p0: l19 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + + vreg_l22a_2p85: l22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <2864000>; + }; + + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + }; + + pmi8998-regulators { + compatible = "qcom,rpm-pmi8998-regulators"; + + vdd_bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&remoteproc_adsp { + status = "okay"; +}; + +&remoteproc_mss { + status = "okay"; +}; + +&remoteproc_slpi { + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <0 4>; @@ -297,12 +660,41 @@ }; }; +&sdhc2 { + status = "okay"; + cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on &sdc2_cd>; + pinctrl-1 = <&sdc2_off &sdc2_cd>; +}; + +&stm { + status = "okay"; +}; + &ufshc { - status = "ok"; + status = "okay"; + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l26a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + vcc-max-microamp = <750000>; + vccq-max-microamp = <560000>; + vccq2-max-microamp = <750000>; }; &ufsphy { - status = "ok"; + status = "okay"; + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + vddp-ref-clk-supply = <&vreg_l26a_1p2>; +}; + +&usb3 { + status = "okay"; }; &usb3_dwc3 { @@ -310,8 +702,24 @@ extcon = <&extcon_usb>; }; +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; +}; + /* GT9286 analog supply */ &vreg_l28_3p0 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts index 1eb406b43fd7..38389c6a3f68 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts @@ -16,13 +16,14 @@ keyboard@3a { compatible = "hid-over-i2c"; - interrupt-parent = <&tlmm>; - interrupts = <0x79 IRQ_TYPE_LEVEL_LOW>; reg = <0x3a>; - hid-descr-addr = <0x0001>; - pinctrl-names = "default"; pinctrl-0 = <&touchpad>; + + interrupt-parent = <&tlmm>; + interrupts = <121 IRQ_TYPE_LEVEL_LOW>; + + hid-descr-addr = <0x0001>; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts index f55f6f3e3e5d..cf81c33a9d7e 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts @@ -16,13 +16,14 @@ keyboard@3a { compatible = "hid-over-i2c"; - interrupt-parent = <&tlmm>; - interrupts = <0x79 IRQ_TYPE_LEVEL_LOW>; reg = <0x3a>; - hid-descr-addr = <0x0001>; - pinctrl-names = "default"; pinctrl-0 = <&touchpad>; + + interrupt-parent = <&tlmm>; + interrupts = <121 IRQ_TYPE_LEVEL_LOW>; + + hid-descr-addr = <0x0001>; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts index 66540d2ca13b..a3ca58100aee 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts @@ -3,11 +3,450 @@ /dts-v1/; -#include "msm8998-mtp.dtsi" +#include "msm8998.dtsi" +#include "pm8005.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" / { model = "Qualcomm Technologies, Inc. MSM8998 v1 MTP"; - compatible = "qcom,msm8998-mtp"; + compatible = "qcom,msm8998-mtp", "qcom,msm8998"; qcom,board-id = <8 0>; + + aliases { + serial0 = &blsp2_uart1; + serial1 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&blsp1_uart3_on { + rx { + /delete-property/ bias-disable; + /* + * Configure a pull-up on 45 (RX). This is needed to + * avoid garbage data when the TX pin of the Bluetooth + * module is in tri-state (module powered off or not + * driving the signal yet). + */ + bias-pull-up; + }; + + cts { + /delete-property/ bias-disable; + /* + * Configure a pull-down on 47 (CTS) to match the pull + * of the Bluetooth module. + */ + bias-pull-down; + }; +}; + +&blsp2_uart1 { + status = "okay"; +}; + +&etf { + status = "okay"; +}; + +&etm1 { + status = "okay"; +}; + +&etm2 { + status = "okay"; +}; + +&etm3 { + status = "okay"; +}; + +&etm4 { + status = "okay"; +}; + +&etm5 { + status = "okay"; +}; + +&etm6 { + status = "okay"; +}; + +&etm7 { + status = "okay"; +}; + +&etm8 { + status = "okay"; +}; + +&etr { + status = "okay"; +}; + +&funnel1 { + status = "okay"; +}; + +&funnel2 { + status = "okay"; +}; + +&funnel3 { + status = "okay"; +}; + +&funnel4 { + // FIXME: Figure out why clock late_initcall crashes the board with + // this enabled. + // status = "okay"; +}; + +&funnel5 { + // FIXME: Figure out why clock late_initcall crashes the board with + // this enabled. + // status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pm8005_regulators { + vdd_s1-supply = <&vph_pwr>; + + pm8005_s1: s1 { /* VDD_GFX supply */ + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + + /* Hack until we rig up the gpu consumer */ + regulator-always-on; + }; +}; + +&qusb2phy { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&replicator1 { + status = "okay"; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vreg_bob>; + vdd_l10_l23_l25-supply = <&vreg_bob>; + vdd_l13_l19_l21-supply = <&vreg_bob>; + vdd_l16_l28-supply = <&vreg_bob>; + vdd_l18_l22-supply = <&vreg_bob>; + vdd_l20_l24-supply = <&vreg_bob>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <1808000>; + }; + + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l14a_1p88: l14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + }; + + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a_2p7: l18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l19a_3p0: l19 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + + vreg_l22a_2p85: l22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <2864000>; + }; + + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + }; + + pmi8998-regulators { + compatible = "qcom,rpm-pmi8998-regulators"; + + vdd_bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&remoteproc_adsp { + status = "okay"; +}; + +&remoteproc_mss { + status = "okay"; +}; + +&remoteproc_slpi { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; +}; + +&sdhc2 { + status = "okay"; + cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on &sdc2_cd>; + pinctrl-1 = <&sdc2_off &sdc2_cd>; +}; + +&stm { + status = "okay"; +}; + +&ufshc { + status = "okay"; + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l26a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + vcc-max-microamp = <750000>; + vccq-max-microamp = <560000>; + vccq2-max-microamp = <750000>; +}; + +&ufsphy { + status = "okay"; + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + vddp-ref-clk-supply = <&vreg_l26a_1p2>; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "host"; /* Force to host until we have Type-C hooked up */ +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi deleted file mode 100644 index af67c641df4e..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ /dev/null @@ -1,421 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ - -#include "msm8998.dtsi" -#include "pm8998.dtsi" -#include "pmi8998.dtsi" -#include "pm8005.dtsi" - -/ { - aliases { - serial0 = &blsp2_uart1; - serial1 = &blsp1_uart3; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-always-on; - regulator-boot-on; - }; -}; - -&blsp1_uart3 { - status = "okay"; - - bluetooth { - compatible = "qcom,wcn3990-bt"; - - vddio-supply = <&vreg_s4a_1p8>; - vddxo-supply = <&vreg_l7a_1p8>; - vddrf-supply = <&vreg_l17a_1p3>; - vddch0-supply = <&vreg_l25a_3p3>; - max-speed = <3200000>; - }; -}; - -&blsp2_uart1 { - status = "okay"; -}; - -&etf { - status = "okay"; -}; - -&etm1 { - status = "okay"; -}; - -&etm2 { - status = "okay"; -}; - -&etm3 { - status = "okay"; -}; - -&etm4 { - status = "okay"; -}; - -&etm5 { - status = "okay"; -}; - -&etm6 { - status = "okay"; -}; - -&etm7 { - status = "okay"; -}; - -&etm8 { - status = "okay"; -}; - -&etr { - status = "okay"; -}; - -&funnel1 { - status = "okay"; -}; - -&funnel2 { - status = "okay"; -}; - -&funnel3 { - status = "okay"; -}; - -&funnel4 { - // FIXME: Figure out why clock late_initcall crashes the board with - // this enabled. - // status = "okay"; -}; - -&funnel5 { - // FIXME: Figure out why clock late_initcall crashes the board with - // this enabled. - // status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie_phy { - status = "okay"; -}; - -&pm8005_lsid1 { - pm8005-regulators { - compatible = "qcom,pm8005-regulators"; - - vdd_s1-supply = <&vph_pwr>; - - pm8005_s1: s1 { /* VDD_GFX supply */ - regulator-min-microvolt = <524000>; - regulator-max-microvolt = <1100000>; - regulator-enable-ramp-delay = <500>; - - /* hack until we rig up the gpu consumer */ - regulator-always-on; - }; - }; -}; - -&qusb2phy { - status = "okay"; - - vdda-pll-supply = <&vreg_l12a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; -}; - -&replicator1 { - status = "okay"; -}; - -&rpm_requests { - pm8998-regulators { - compatible = "qcom,rpm-pm8998-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; - vdd_s3-supply = <&vph_pwr>; - vdd_s4-supply = <&vph_pwr>; - vdd_s5-supply = <&vph_pwr>; - vdd_s6-supply = <&vph_pwr>; - vdd_s7-supply = <&vph_pwr>; - vdd_s8-supply = <&vph_pwr>; - vdd_s9-supply = <&vph_pwr>; - vdd_s10-supply = <&vph_pwr>; - vdd_s11-supply = <&vph_pwr>; - vdd_s12-supply = <&vph_pwr>; - vdd_s13-supply = <&vph_pwr>; - vdd_l1_l27-supply = <&vreg_s7a_1p025>; - vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; - vdd_l3_l11-supply = <&vreg_s7a_1p025>; - vdd_l4_l5-supply = <&vreg_s7a_1p025>; - vdd_l6-supply = <&vreg_s5a_2p04>; - vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; - vdd_l9-supply = <&vreg_bob>; - vdd_l10_l23_l25-supply = <&vreg_bob>; - vdd_l13_l19_l21-supply = <&vreg_bob>; - vdd_l16_l28-supply = <&vreg_bob>; - vdd_l18_l22-supply = <&vreg_bob>; - vdd_l20_l24-supply = <&vreg_bob>; - vdd_l26-supply = <&vreg_s3a_1p35>; - vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; - - vreg_s3a_1p35: s3 { - regulator-min-microvolt = <1352000>; - regulator-max-microvolt = <1352000>; - }; - vreg_s4a_1p8: s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-allow-set-load; - }; - vreg_s5a_2p04: s5 { - regulator-min-microvolt = <1904000>; - regulator-max-microvolt = <2040000>; - }; - vreg_s7a_1p025: s7 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1028000>; - }; - vreg_l1a_0p875: l1 { - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <880000>; - }; - vreg_l2a_1p2: l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - vreg_l3a_1p0: l3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - vreg_l5a_0p8: l5 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - }; - vreg_l6a_1p8: l6 { - regulator-min-microvolt = <1808000>; - regulator-max-microvolt = <1808000>; - }; - vreg_l7a_1p8: l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l8a_1p2: l8 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - vreg_l9a_1p8: l9 { - regulator-min-microvolt = <1808000>; - regulator-max-microvolt = <2960000>; - }; - vreg_l10a_1p8: l10 { - regulator-min-microvolt = <1808000>; - regulator-max-microvolt = <2960000>; - }; - vreg_l11a_1p0: l11 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - vreg_l12a_1p8: l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l13a_2p95: l13 { - regulator-min-microvolt = <1808000>; - regulator-max-microvolt = <2960000>; - }; - vreg_l14a_1p88: l14 { - regulator-min-microvolt = <1880000>; - regulator-max-microvolt = <1880000>; - }; - vreg_l15a_1p8: l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l16a_2p7: l16 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2704000>; - }; - vreg_l17a_1p3: l17 { - regulator-min-microvolt = <1304000>; - regulator-max-microvolt = <1304000>; - }; - vreg_l18a_2p7: l18 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2704000>; - }; - vreg_l19a_3p0: l19 { - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3008000>; - }; - vreg_l20a_2p95: l20 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-allow-set-load; - }; - vreg_l21a_2p95: l21 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-allow-set-load; - regulator-system-load = <800000>; - }; - vreg_l22a_2p85: l22 { - regulator-min-microvolt = <2864000>; - regulator-max-microvolt = <2864000>; - }; - vreg_l23a_3p3: l23 { - regulator-min-microvolt = <3312000>; - regulator-max-microvolt = <3312000>; - }; - vreg_l24a_3p075: l24 { - regulator-min-microvolt = <3088000>; - regulator-max-microvolt = <3088000>; - }; - vreg_l25a_3p3: l25 { - regulator-min-microvolt = <3104000>; - regulator-max-microvolt = <3312000>; - }; - vreg_l26a_1p2: l26 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-allow-set-load; - }; - vreg_l28_3p0: l28 { - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3008000>; - }; - - vreg_lvs1a_1p8: lvs1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vreg_lvs2a_1p8: lvs2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - }; - - pmi8998-regulators { - compatible = "qcom,rpm-pmi8998-regulators"; - - vdd_bob-supply = <&vph_pwr>; - - vreg_bob: bob { - regulator-min-microvolt = <3312000>; - regulator-max-microvolt = <3600000>; - }; - }; -}; - -&remoteproc_adsp { - status = "okay"; -}; - -&remoteproc_mss { - status = "okay"; -}; - -&remoteproc_slpi { - status = "okay"; -}; - -&tlmm { - gpio-reserved-ranges = <0 4>, <81 4>; -}; - -&sdhc2 { - status = "okay"; - cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; - - vmmc-supply = <&vreg_l21a_2p95>; - vqmmc-supply = <&vreg_l13a_2p95>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; -}; - -&stm { - status = "okay"; -}; - -&ufshc { - status = "okay"; - vcc-supply = <&vreg_l20a_2p95>; - vccq-supply = <&vreg_l26a_1p2>; - vccq2-supply = <&vreg_s4a_1p8>; - vcc-max-microamp = <750000>; - vccq-max-microamp = <560000>; - vccq2-max-microamp = <750000>; -}; - -&ufsphy { - status = "okay"; - vdda-phy-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l2a_1p2>; - vddp-ref-clk-supply = <&vreg_l26a_1p2>; -}; - -&usb3 { - status = "okay"; -}; - -&usb3_dwc3 { - dr_mode = "host"; /* Force to host until we have Type-C hooked up */ -}; - -&usb3phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l2a_1p2>; -}; - -&wifi { - status = "okay"; - - vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; - vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; -}; - -/* PINCTRL - board-specific pinctrl */ -&blsp1_uart3_on { - rx { - /delete-property/ bias-disable; - /* - * Configure a pull-up on 45 (RX). This is needed to - * avoid garbage data when the TX pin of the Bluetooth - * module is in tri-state (module powered off or not - * driving the signal yet). - */ - bias-pull-up; - }; - - cts { - /delete-property/ bias-disable; - /* - * Configure a pull-down on 47 (CTS) to match the pull - * of the Bluetooth module. - */ - bias-pull-down; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts index 9563eb62db88..ef2a88a64d32 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts @@ -32,7 +32,7 @@ }; &pmi8998_gpio { - button_backlight_default: button-backlight-default { + button_backlight_default: button-backlight-state { pinconf { pins = "gpio5"; function = "normal"; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi index dbaea360bffc..62bda23791bb 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -11,9 +11,9 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include "msm8998.dtsi" +#include "pm8005.dtsi" #include "pm8998.dtsi" #include "pmi8998.dtsi" -#include "pm8005.dtsi" / { /* Required for bootloader to select correct board */ @@ -32,6 +32,19 @@ height = <1920>; stride = <(1080 * 4)>; format = "a8r8g8b8"; + /* + * That's a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet.. + */ + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_BYTE0_INTF_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>; + power-domains = <&mmcc MDSS_GDSC>; }; }; @@ -77,7 +90,7 @@ pinctrl-names = "default"; pinctrl-0 = <&vol_keys_default>; - vol-down { + button-vol-down { label = "Volume down"; gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; @@ -85,7 +98,7 @@ wakeup-source; }; - vol-up { + button-vol-up { label = "Volume up"; gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; @@ -101,7 +114,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hall_sensor_default>; - hall-sensor { + event-hall-sensor { label = "Hall Effect Sensor"; gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; @@ -245,32 +258,24 @@ status = "okay"; }; -&pm8005_lsid1 { - pm8005-regulators { - compatible = "qcom,pm8005-regulators"; - - vdd_s1-supply = <&vph_pwr>; - - pm8005_s1: s1 { /* VDD_GFX supply */ - regulator-min-microvolt = <524000>; - regulator-max-microvolt = <1100000>; - regulator-enable-ramp-delay = <500>; - - /* hack until we rig up the gpu consumer */ - regulator-always-on; - }; +&pm8005_regulators { + /* VDD_GFX supply */ + pm8005_s1: s1 { + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + /* Hack until we rig up the gpu consumer */ + regulator-always-on; }; }; &pm8998_gpio { - vol_keys_default: vol-keys-default { - pinconf { - pins = "gpio5", "gpio6"; - function = "normal"; - bias-pull-up; - input-enable; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - }; + vol_keys_default: vol-keys-state { + pins = "gpio5", "gpio6"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; }; @@ -318,91 +323,113 @@ regulator-min-microvolt = <1352000>; regulator-max-microvolt = <1352000>; }; + vreg_s4a_1p8: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-allow-set-load; }; + vreg_s5a_2p04: s5 { regulator-min-microvolt = <1904000>; regulator-max-microvolt = <2040000>; }; + vreg_s7a_1p025: s7 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <1028000>; }; + vreg_l1a_0p875: l1 { regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; }; + vreg_l2a_1p2: l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; + vreg_l3a_1p0: l3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; + vreg_l5a_0p8: l5 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <800000>; }; + vreg_l6a_1p8: l6 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <1808000>; }; + vreg_l7a_1p8: l7 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l8a_1p2: l8 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; + vreg_l9a_1p8: l9 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l10a_1p8: l10 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l11a_1p0: l11 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; + vreg_l12a_1p8: l12 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l13a_2p95: l13 { regulator-min-microvolt = <1808000>; regulator-max-microvolt = <2960000>; }; + vreg_l14a_1p88: l14 { regulator-min-microvolt = <1880000>; regulator-max-microvolt = <1880000>; }; + vreg_l15a_1p8: l15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vreg_l16a_2p7: l16 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2704000>; }; + vreg_l17a_1p3: l17 { regulator-min-microvolt = <1304000>; regulator-max-microvolt = <1304000>; }; + vreg_l18a_2p7: l18 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2704000>; }; + vreg_l19a_3p0: l19 { regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3008000>; }; + vreg_l20a_2p95: l20 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; @@ -411,34 +438,41 @@ vreg_l21a_2p95: l21 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; - regulator-allow-set-load; regulator-system-load = <800000>; + regulator-allow-set-load; }; + vreg_l22a_2p85: l22 { regulator-min-microvolt = <2864000>; regulator-max-microvolt = <2864000>; }; + vreg_l23a_3p3: l23 { regulator-min-microvolt = <3312000>; regulator-max-microvolt = <3312000>; }; + vreg_l24a_3p075: l24 { regulator-min-microvolt = <3088000>; regulator-max-microvolt = <3088000>; }; + vreg_l25a_3p3: l25 { regulator-min-microvolt = <3104000>; regulator-max-microvolt = <3312000>; }; + vreg_l26a_1p2: l26 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-allow-set-load; }; + vreg_l28_3p0: l28 { regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3008000>; }; + vreg_lvs1a_1p8: lvs1 { }; vreg_lvs2a_1p8: lvs2 { }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts index caacb7c28402..fcaefc1b1e2f 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts @@ -29,3 +29,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; + +&vreg_lvs1a_1p8 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts index 978495a8a6b9..20fe0394a3c1 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts @@ -38,7 +38,7 @@ }; &pmi8998_gpio { - disp_dvdd_en: disp-dvdd-en-active { + disp_dvdd_en: disp-dvdd-en-active-state { pins = "gpio10"; function = "normal"; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts index 4a1f98a21031..c21333aa73c2 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts @@ -26,11 +26,13 @@ }; &vreg_l18a_2p85 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; + /* Note: Round-down from 2850000 to be a multiple of PLDO step-size 8000 */ + regulator-min-microvolt = <2848000>; + regulator-max-microvolt = <2848000>; }; &vreg_l22a_2p85 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; + /* Note: Round-down from 2700000 to be a multiple of PLDO step-size 8000 */ + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <2696000>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi index 47488a1aecae..d08639082247 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -5,15 +5,13 @@ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> */ +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include "msm8998.dtsi" #include "pm8005.dtsi" #include "pm8998.dtsi" #include "pmi8998.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include <dt-bindings/sound/qcom,q6afe.h> -#include <dt-bindings/sound/qcom,q6asm.h> / { /* required for bootloader to select correct board */ @@ -21,8 +19,6 @@ qcom,board-id = <8 0>; clocks { - compatible = "simple-bus"; - div1_mclk: divclk1 { compatible = "gpio-gate-clock"; pinctrl-0 = <&audio_mclk_pin>; @@ -91,13 +87,21 @@ regulator-boot-on; }; + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&tlmm 128 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_extcon_active &usb_vbus_active>; + }; + gpio-keys { compatible = "gpio-keys"; label = "Side buttons"; pinctrl-names = "default"; pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>, <&cam_snapshot_pin_a>; - vol-down { + button-vol-down { label = "Volume Down"; gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; @@ -106,7 +110,7 @@ debounce-interval = <15>; }; - camera-snapshot { + button-camera-snapshot { label = "Camera Snapshot"; gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; @@ -114,7 +118,7 @@ debounce-interval = <15>; }; - camera-focus { + button-camera-focus { label = "Camera Focus"; gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; @@ -129,7 +133,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hall_sensor0_default>; - hall-sensor0 { + event-hall-sensor0 { label = "Cover Hall Sensor"; gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; @@ -245,6 +249,24 @@ status = "okay"; }; +&blsp2_i2c2 { + status = "okay"; + + proximity@29 { + compatible = "st,vl53l0x"; + reg = <0x29>; + + interrupt-parent = <&tlmm>; + interrupts = <22 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>; + vdd-supply = <&cam_vio_vreg>; + + pinctrl-names = "default"; + pinctrl-0 = <&tof_int &tof_reset>; + }; +}; + &ibb { regulator-min-microamp = <800000>; regulator-max-microamp = <800000>; @@ -270,32 +292,19 @@ regulator-soft-start; }; -&mmcc { - status = "ok"; -}; - -&mmss_smmu { - status = "ok"; -}; - -&pm8005_lsid1 { - pm8005-regulators { - compatible = "qcom,pm8005-regulators"; - - vdd_s1-supply = <&vph_pwr>; - - /* VDD_GFX supply */ - pm8005_s1: s1 { - regulator-min-microvolt = <524000>; - regulator-max-microvolt = <1088000>; - regulator-enable-ramp-delay = <500>; - regulator-always-on; - }; +&pm8005_regulators { + /* VDD_GFX supply */ + pm8005_s1: s1 { + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1088000>; + regulator-enable-ramp-delay = <500>; + /* Hack until we rig up the gpu consumer */ + regulator-always-on; }; }; &pm8998_gpio { - vol_down_pin_a: vol-down-active { + vol_down_pin_a: vol-down-active-state { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; bias-pull-up; @@ -303,7 +312,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - cam_focus_pin_a: cam-focus-btn-active { + cam_focus_pin_a: cam-focus-btn-active-state { pins = "gpio7"; function = PMIC_GPIO_FUNC_NORMAL; bias-pull-up; @@ -311,7 +320,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - cam_snapshot_pin_a: cam-snapshot-btn-active { + cam_snapshot_pin_a: cam-snapshot-btn-active-state { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; bias-pull-up; @@ -319,7 +328,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - audio_mclk_pin: audio-mclk-pin-active { + audio_mclk_pin: audio-mclk-pin-active-state { pins = "gpio13"; function = "func2"; power-source = <0>; @@ -327,7 +336,7 @@ }; &pmi8998_gpio { - cam_vio_default: cam-vio-active { + cam_vio_default: cam-vio-active-state { pins = "gpio1"; function = PMIC_GPIO_FUNC_NORMAL; bias-disable; @@ -337,7 +346,7 @@ power-source = <1>; }; - vib_default: vib-en { + vib_default: vib-en-state { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; bias-disable; @@ -549,8 +558,8 @@ vqmmc-supply = <&vreg_l13a_2p95>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_on &sdc2_cd>; + pinctrl-1 = <&sdc2_off &sdc2_cd>; }; &tlmm { @@ -606,6 +615,14 @@ drive-strength = <2>; }; + tof_int: tof-int { + pins = "gpio22"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + input-enable; + }; + cam1_vdig_default: cam1-vdig-default { pins = "gpio25"; function = "gpio"; @@ -613,6 +630,20 @@ drive-strength = <2>; }; + usb_extcon_active: usb-extcon-active { + pins = "gpio38"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + }; + + tof_reset: tof-reset { + pins = "gpio27"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + hall_sensor0_default: acc-cover-open { pins = "gpio124"; function = "gpio"; @@ -628,6 +659,14 @@ bias-pull-up; }; + usb_vbus_active: usb-vbus-active { + pins = "gpio128"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; + }; + ts_vddio_en: ts-vddio-en-default { pins = "gpio133"; function = "gpio"; @@ -658,6 +697,7 @@ &usb3_dwc3 { /* Force to peripheral until we have Type-C hooked up */ dr_mode = "peripheral"; + extcon = <&extcon_usb>; }; &usb3phy { diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 758c45bbbe78..02d21bff2198 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -838,7 +838,7 @@ }; qfprom: qfprom@784000 { - compatible = "qcom,qfprom"; + compatible = "qcom,msm8998-qfprom", "qcom,qfprom"; reg = <0x00784000 0x621c>; #address-cells = <1>; #size-cells = <1>; @@ -929,7 +929,7 @@ interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>, + interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 2 &intc 0 0 136 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 3 &intc 0 0 138 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 4 &intc 0 0 139 IRQ_TYPE_LEVEL_HIGH>; @@ -1057,85 +1057,58 @@ reg = <0x03400000 0xc00000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; - #gpio-cells = <0x2>; + #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <0x2>; + #interrupt-cells = <2>; - sdc2_clk_on: sdc2_clk_on { - config { + sdc2_on: sdc2-on { + clk { pins = "sdc2_clk"; - bias-disable; drive-strength = <16>; - }; - }; - - sdc2_clk_off: sdc2_clk_off { - config { - pins = "sdc2_clk"; bias-disable; - drive-strength = <2>; }; - }; - sdc2_cmd_on: sdc2_cmd_on { - config { + cmd { pins = "sdc2_cmd"; - bias-pull-up; drive-strength = <10>; - }; - }; - - sdc2_cmd_off: sdc2_cmd_off { - config { - pins = "sdc2_cmd"; bias-pull-up; - drive-strength = <2>; }; - }; - sdc2_data_on: sdc2_data_on { - config { + data { pins = "sdc2_data"; - bias-pull-up; drive-strength = <10>; + bias-pull-up; }; }; - sdc2_data_off: sdc2_data_off { - config { - pins = "sdc2_data"; - bias-pull-up; + sdc2_off: sdc2-off { + clk { + pins = "sdc2_clk"; drive-strength = <2>; + bias-disable; }; - }; - sdc2_cd_on: sdc2_cd_on { - mux { - pins = "gpio95"; - function = "gpio"; + cmd { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; }; - config { - pins = "gpio95"; - bias-pull-up; + data { + pins = "sdc2_data"; drive-strength = <2>; + bias-pull-up; }; }; - sdc2_cd_off: sdc2_cd_off { - mux { - pins = "gpio95"; - function = "gpio"; - }; - - config { - pins = "gpio95"; - bias-pull-up; - drive-strength = <2>; - }; + sdc2_cd: sdc2-cd { + pins = "gpio95"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; }; - blsp1_uart3_on: blsp1_uart3_on { + blsp1_uart3_on: blsp1-uart3-on { tx { pins = "gpio45"; function = "blsp_uart3_a"; @@ -1416,7 +1389,7 @@ status = "disabled"; gpu_opp_table: opp-table { - compatible = "operating-points-v2"; + compatible = "operating-points-v2"; opp-710000097 { opp-hz = /bits/ 64 <710000097>; opp-level = <RPM_SMD_LEVEL_TURBO>; @@ -2080,7 +2053,7 @@ <0xc010600 0x128>, <0xc010800 0x200>; #phy-cells = <0>; - #clock-cells = <1>; + #clock-cells = <0>; clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; @@ -2102,7 +2075,7 @@ nvmem-cells = <&qusb2_hstx_trim>; }; - sdhc2: sdhci@c0a4900 { + sdhc2: mmc@c0a4900 { compatible = "qcom,sdhci-msm-v4"; reg = <0x0c0a4900 0x314>, <0x0c0a4000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -2415,7 +2388,6 @@ #reset-cells = <1>; #power-domain-cells = <1>; reg = <0xc8c0000 0x40000>; - status = "disabled"; clock-names = "xo", "gpll0", @@ -2450,7 +2422,6 @@ <&mmcc BIMC_SMMU_AXI_CLK>; clock-names = "iface-mm", "iface-smmu", "bus-mm", "bus-smmu"; - status = "disabled"; #global-interrupts = <0>; interrupts = diff --git a/arch/arm64/boot/dts/qcom/pm6350.dtsi b/arch/arm64/boot/dts/qcom/pm6350.dtsi index c5d85064562b..ecf9b9919182 100644 --- a/arch/arm64/boot/dts/qcom/pm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6350.dtsi @@ -36,9 +36,10 @@ }; pm6350_gpios: gpios@c000 { - compatible = "qcom,pm6350-gpio"; + compatible = "qcom,pm6350-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm6350_gpios 0 0 9>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi index c482663aad56..d0eefbb51663 100644 --- a/arch/arm64/boot/dts/qcom/pm660.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -171,7 +171,7 @@ }; pm660_gpios: gpios@c000 { - compatible = "qcom,pm660-gpio"; + compatible = "qcom,pm660-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; gpio-ranges = <&pm660_gpios 0 0 13>; diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi index cfef42353611..c7945470ffee 100644 --- a/arch/arm64/boot/dts/qcom/pm660l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi @@ -65,9 +65,15 @@ #address-cells = <1>; #size-cells = <0>; + pm660l_lpg: lpg@b100 { + compatible = "qcom,pm660l-lpg"; + + status = "disabled"; + }; + pm660l_wled: leds@d800 { compatible = "qcom,pm660l-wled"; - reg = <0xd800 0xd900>; + reg = <0xd800>, <0xd900>; interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ovp"; label = "backlight"; diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi index 3f97607d8baa..50fb6c753bf8 100644 --- a/arch/arm64/boot/dts/qcom/pm8005.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi @@ -28,5 +28,9 @@ reg = <0x5 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pm8005_regulators: regulators { + compatible = "qcom,pm8005-regulators"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8009.dtsi b/arch/arm64/boot/dts/qcom/pm8009.dtsi index b126d7e7e4fb..0c2c424be0ea 100644 --- a/arch/arm64/boot/dts/qcom/pm8009.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8009.dtsi @@ -19,9 +19,10 @@ }; pm8009_gpios: gpio@c000 { - compatible = "qcom,pm8005-gpio"; + compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8009_gpios 0 0 4>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi index 0df76f7b1cc1..fd8434215924 100644 --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -127,9 +127,10 @@ }; pm8150_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio"; + compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8150_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index 058cc5107c75..5d1ec3a6cc3c 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -112,9 +112,10 @@ }; pm8150b_gpios: gpio@c000 { - compatible = "qcom,pm8150b-gpio"; + compatible = "qcom,pm8150b-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8150b_gpios 0 0 12>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -126,5 +127,15 @@ reg = <0x3 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pm8150b_lpg: lpg { + compatible = "qcom,pm8150b-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index 52f094a2b713..c62d023b39a2 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -100,9 +100,10 @@ }; pm8150l_gpios: gpio@c000 { - compatible = "qcom,pm8150l-gpio"; + compatible = "qcom,pm8150l-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8150l_gpios 0 0 12>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -114,5 +115,16 @@ reg = <0x5 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pm8150l_lpg: lpg { + compatible = "qcom,pm8150l-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8350.dtsi b/arch/arm64/boot/dts/qcom/pm8350.dtsi index b10f33afa5e3..2dfeb99300d7 100644 --- a/arch/arm64/boot/dts/qcom/pm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8350.dtsi @@ -45,9 +45,10 @@ }; pm8350_gpios: gpio@8800 { - compatible = "qcom,pm8350-gpio"; + compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; reg = <0x8800>; gpio-controller; + gpio-ranges = <&pm8350_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pm8350b.dtsi b/arch/arm64/boot/dts/qcom/pm8350b.dtsi index f1d1d4c8edf8..f1c7bd9d079c 100644 --- a/arch/arm64/boot/dts/qcom/pm8350b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8350b.dtsi @@ -45,9 +45,10 @@ }; pm8350b_gpios: gpio@8800 { - compatible = "qcom,pm8350b-gpio"; + compatible = "qcom,pm8350b-gpio", "qcom,spmi-gpio"; reg = <0x8800>; gpio-controller; + gpio-ranges = <&pm8350b_gpios 0 0 8>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index d58902432812..606c2a6d1f0f 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -108,14 +108,13 @@ }; pm8916_gpios: gpios@c000 { - compatible = "qcom,pm8916-gpio"; + compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8916_gpios 0 0 4>; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; }; @@ -125,6 +124,14 @@ #address-cells = <1>; #size-cells = <0>; + pm8916_pwm: pwm { + compatible = "qcom,pm8916-pwm"; + + #pwm-cells = <2>; + + status = "disabled"; + }; + pm8916_vib: vibrator@c000 { compatible = "qcom,pm8916-vib"; reg = <0xc000>; diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index 5ab46117d737..ab342397fcd8 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -135,6 +135,16 @@ #address-cells = <1>; #size-cells = <0>; + pm8994_lpg: lpg { + compatible = "qcom,pm8994-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + pm8994_spmi_regulators: regulators { compatible = "qcom,pm8994-regulators"; }; diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi index 6e7c252568e6..84c44912ec93 100644 --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -19,6 +19,16 @@ interrupt-controller; #interrupt-cells = <2>; }; + + pmi8994_mpps: mpps@a000 { + compatible = "qcom,pmi8994-mpp"; + reg = <0xa000>; + gpio-controller; + gpio-ranges = <&pmi8994_mpps 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; pmic@3 { @@ -27,6 +37,16 @@ #address-cells = <1>; #size-cells = <0>; + pmi8994_lpg: lpg { + compatible = "qcom,pmi8994-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + pmi8994_spmi_regulators: regulators { compatible = "qcom,pmi8994-regulators"; #address-cells = <1>; @@ -35,7 +55,7 @@ pmi8994_wled: wled@d800 { compatible = "qcom,pmi8994-wled"; - reg = <0xd800 0xd900>; + reg = <0xd800>, <0xd900>; interrupts = <3 0xd8 0x02 IRQ_TYPE_EDGE_RISING>; interrupt-names = "short"; qcom,cabc; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index 0fef5f113f05..6d3d212560c1 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -42,9 +42,19 @@ }; }; + pmi8998_lpg: lpg { + compatible = "qcom,pmi8998-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + pmi8998_wled: leds@d800 { compatible = "qcom,pmi8998-wled"; - reg = <0xd800 0xd900>; + reg = <0xd800>, <0xd900>; interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ovp", "short"; @@ -52,6 +62,5 @@ status = "disabled"; }; - }; }; diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi index 7072e5a2e73f..68e9122363ae 100644 --- a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi +++ b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi @@ -116,7 +116,7 @@ }; pmm8155au_1_gpios: gpio@c000 { - compatible = "qcom,pmm8155au-gpio"; + compatible = "qcom,pmm8155au-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi index 72075964fbb9..c307fc662511 100644 --- a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi +++ b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi @@ -89,7 +89,7 @@ }; pmm8155au_2_gpios: gpio@c000 { - compatible = "qcom,pmm8155au-gpio"; + compatible = "qcom,pmm8155au-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pmr735b.dtsi b/arch/arm64/boot/dts/qcom/pmr735b.dtsi index 604324188603..ec24c4478005 100644 --- a/arch/arm64/boot/dts/qcom/pmr735b.dtsi +++ b/arch/arm64/boot/dts/qcom/pmr735b.dtsi @@ -45,9 +45,10 @@ }; pmr735b_gpios: gpio@8800 { - compatible = "qcom,pmr735b-gpio"; + compatible = "qcom,pmr735b-gpio", "qcom,spmi-gpio"; reg = <0x8800>; gpio-controller; + gpio-ranges = <&pmr735b_gpios 0 0 4>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi index 98d173a377d5..634b0681d04c 100644 --- a/arch/arm64/boot/dts/qcom/pms405.dtsi +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi @@ -38,22 +38,13 @@ #size-cells = <0>; pms405_gpios: gpio@c000 { - compatible = "qcom,pms405-gpio"; + compatible = "qcom,pms405-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pms405_gpios 0 0 12>; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>, - <0 0xc4 0 IRQ_TYPE_NONE>, - <0 0xc5 0 IRQ_TYPE_NONE>, - <0 0xc6 0 IRQ_TYPE_NONE>, - <0 0xc7 0 IRQ_TYPE_NONE>, - <0 0xc8 0 IRQ_TYPE_NONE>, - <0 0xc9 0 IRQ_TYPE_NONE>, - <0 0xca 0 IRQ_TYPE_NONE>, - <0 0xcb 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; pon@800 { diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index 2f3104a84417..1721ebe5759b 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -304,7 +304,7 @@ }; &pms405_gpios { - usb_vbus_boost_pin: usb-vbus-boost-pin { + usb_vbus_boost_pin: usb-vbus-boost-state { pinconf { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; @@ -312,7 +312,7 @@ power-source = <1>; }; }; - usb3_vbus_pin: usb3-vbus-pin { + usb3_vbus_pin: usb3-vbus-state { pinconf { pins = "gpio12"; function = PMIC_GPIO_FUNC_NORMAL; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index d912166b7552..9ab990061522 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -366,7 +366,7 @@ }; qfprom: qfprom@a4000 { - compatible = "qcom,qfprom"; + compatible = "qcom,qcs404-qfprom", "qcom,qfprom"; reg = <0x000a4000 0x1000>; #address-cells = <1>; #size-cells = <1>; @@ -548,7 +548,7 @@ compatible = "snps,dwc3"; reg = <0x07580000 0xcd00>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb2_phy_sec>, <&usb3_phy>; + phys = <&usb2_phy_prim>, <&usb3_phy>; phy-names = "usb2-phy", "usb3-phy"; snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; @@ -577,7 +577,7 @@ compatible = "snps,dwc3"; reg = <0x078c0000 0xcc00>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb2_phy_prim>; + phys = <&usb2_phy_sec>; phy-names = "usb2-phy"; snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; @@ -669,8 +669,25 @@ }; blsp1_spi1_default: blsp1-spi1-default { - pins = "gpio22", "gpio23", "gpio24", "gpio25"; - function = "blsp_spi1"; + mosi { + pins = "gpio22"; + function = "blsp_spi_mosi_a1"; + }; + + miso { + pins = "gpio23"; + function = "blsp_spi_miso_a1"; + }; + + cs_n { + pins = "gpio24"; + function = "blsp_spi_cs_n_a1"; + }; + + clk { + pins = "gpio25"; + function = "blsp_spi_clk_a1"; + }; }; blsp1_spi2_default: blsp1-spi2-default { @@ -789,7 +806,7 @@ status = "disabled"; }; - sdcc1: sdcc@7804000 { + sdcc1: mmc@7804000 { compatible = "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5"; reg = <0x07804000 0x1000>, <0x7805000 0x1000>; reg-names = "hc", "cqhci"; @@ -798,10 +815,10 @@ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; status = "disabled"; }; @@ -1102,8 +1119,8 @@ status = "disabled"; }; - imem@8600000 { - compatible = "simple-mfd"; + sram@8600000 { + compatible = "qcom,qcs404-imem", "syscon", "simple-mfd"; reg = <0x08600000 0x1000>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index 0e63f707b911..bf8077a1cf9a 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> @@ -57,27 +58,32 @@ leds { compatible = "gpio-leds"; - user4 { + led-user4 { label = "green:user4"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>; linux,default-trigger = "panic-indicator"; default-state = "off"; }; - wlan { + led-wlan { label = "yellow:wlan"; + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_YELLOW>; gpios = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tx"; default-state = "off"; }; - bt { + led-bt { label = "blue:bt"; + function = LED_FUNCTION_BLUETOOTH; + color = <LED_COLOR_ID_BLUE>; gpios = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "bluetooth-power"; default-state = "off"; }; - }; lt9611_1v2: lt9611-vdd12-regulator { @@ -796,7 +802,7 @@ "NC", "PM3003A_MODE"; - lt9611_rst_pin: lt9611-rst-pin { + lt9611_rst_pin: lt9611-rst-state { pins = "gpio5"; function = "normal"; @@ -806,6 +812,38 @@ }; }; +&pm8150l_lpg { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <3>; + + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + default-state = "on"; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; +}; + &pon_pwrkey { status = "okay"; }; @@ -830,7 +868,7 @@ &q6afedai { qi2s@16 { - reg = <16>; + reg = <PRIMARY_MI2S_RX>; qcom,sd-lines = <0 1 2 3>; }; }; @@ -838,7 +876,7 @@ /* TERT I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */ &q6afedai { qi2s@20 { - reg = <20>; + reg = <TERTIARY_MI2S_RX>; qcom,sd-lines = <0>; }; }; @@ -915,7 +953,7 @@ }; codec { - sound-dai = <<9611_codec 0>; + sound-dai = <<9611_codec 0>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts new file mode 100644 index 000000000000..9398f0349944 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -0,0 +1,389 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/spmi/spmi.h> + +#include "sa8540p.dtsi" + +/ { + model = "Qualcomm SA8295P ADP"; + compatible = "qcom,sa8295p-adp", "qcom,sa8540p"; + + aliases { + serial0 = &qup2_uart17; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + pmm8540-a-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_l3a: ldo3 { + regulator-name = "vreg_l3a"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l13a: ldo13 { + regulator-name = "vreg_l13a"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; + + pmm8540-c-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l10c: ldo10 { + regulator-name = "vreg_l10c"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l17c: ldo17 { + regulator-name = "vreg_l17c"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; + + pmm8540-g-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "g"; + + vreg_l3g: ldo3 { + regulator-name = "vreg_l3g"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7g: ldo7 { + regulator-name = "vreg_l7g"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l8g: ldo8 { + regulator-name = "vreg_l8g"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; +}; + +&qup2 { + status = "okay"; +}; + +&qup2_uart17 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sa8540p/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_nsp0 { + firmware-name = "qcom/sa8540p/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_nsp1 { + firmware-name = "qcom/sa8540p/cdsp1.mbn"; + status = "okay"; +}; + +&spmi_bus { + pm8450a: pmic@0 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450a_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8450c: pmic@4 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450c_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8450e: pmic@8 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x8 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450e_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8450g: pmic@c { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0xc SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450g_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17c>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l6c>; + vccq-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l8g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&ufs_card_hc { + reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10c>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l3c>; + vccq-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_card_phy { + vdda-phy-supply = <&vreg_l8g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&usb_0 { + status = "okay"; +}; + +&usb_0_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "peripheral"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7a>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l3a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l1c>; + vdda18-supply = <&vreg_l7c>; + vdda33-supply = <&vreg_l2c>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l4c>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&usb_2_hsphy0 { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_2_hsphy1 { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_2_hsphy2 { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_2_hsphy3 { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_2_qmpphy0 { + vdda-phy-supply = <&vreg_l3a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&usb_2_qmpphy1 { + vdda-phy-supply = <&vreg_l3a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL */ diff --git a/arch/arm64/boot/dts/qcom/sa8540p.dtsi b/arch/arm64/boot/dts/qcom/sa8540p.dtsi new file mode 100644 index 000000000000..8ea2886fbab2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8540p.dtsi @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +#include "sc8280xp.dtsi" + +/delete-node/ &cpu0_opp_table; +/delete-node/ &cpu4_opp_table; + +/ { + cpu0_opp_table: cpu0-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + }; + opp-499200000 { + opp-hz = /bits/ 64 <499200000>; + }; + opp-595200000 { + opp-hz = /bits/ 64 <595200000>; + }; + opp-710400000 { + opp-hz = /bits/ 64 <710400000>; + }; + opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + }; + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + }; + opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + }; + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + }; + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + }; + opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + }; + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000>; + }; + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + }; + opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + }; + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + }; + opp-1881600000 { + opp-hz = /bits/ 64 <1881600000>; + }; + opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + }; + opp-2131200000 { + opp-hz = /bits/ 64 <2131200000>; + }; + opp-2246400000 { + opp-hz = /bits/ 64 <2246400000>; + }; + }; + + cpu4_opp_table: cpu4-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + }; + opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + }; + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + }; + opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + }; + opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + }; + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + }; + opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + }; + opp-1747200000 { + opp-hz = /bits/ 64 <1747200000>; + }; + opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + }; + opp-1977600000 { + opp-hz = /bits/ 64 <1977600000>; + }; + opp-2073600000 { + opp-hz = /bits/ 64 <2073600000>; + }; + opp-2169600000 { + opp-hz = /bits/ 64 <2169600000>; + }; + opp-2284800000 { + opp-hz = /bits/ 64 <2284800000>; + }; + opp-2380800000 { + opp-hz = /bits/ 64 <2380800000>; + }; + opp-2496000000 { + opp-hz = /bits/ 64 <2496000000>; + }; + opp-2592000000 { + opp-hz = /bits/ 64 <2592000000>; + }; + }; +}; + +&rpmhpd { + compatible = "qcom,sa8540p-rpmhpd"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index acdb36f4479f..9dee131b1e24 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -330,6 +330,7 @@ &dsi_phy { status = "okay"; + vdds-supply = <&vreg_l4a_0p8>; }; &mdp { @@ -389,7 +390,7 @@ pinctrl-names = "default","sleep"; pinctrl-0 = <&sdc2_on>; pinctrl-1 = <&sdc2_off>; - vmmc-supply = <&vreg_l9c_2p9>; + vmmc-supply = <&vreg_l9c_2p9>; vqmmc-supply = <&vreg_l6c_2p9>; cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; @@ -467,7 +468,7 @@ /* PINCTRL - additions to nodes defined in sc7180.dtsi */ &pm6150l_gpio { - disp_pins: disp-pins { + disp_pins: disp-state { pinconf { pins = "gpio3"; function = PMIC_GPIO_FUNC_FUNC1; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi index 8ac1f1e61006..7ee407f7b6bb 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi @@ -81,6 +81,10 @@ }; &cros_ec { + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; + cros_ec_proximity: proximity { compatible = "google,cros-ec-mkbp-proximity"; label = "proximity-wifi"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi index d1e2df5164ea..1bd6c7dcd9e9 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi @@ -114,6 +114,12 @@ ap_ts_pen_1v8: &i2c4 { status = "okay"; }; +&cros_ec { + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +}; + &panel { compatible = "samsung,atna33xc20"; enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts new file mode 100644 index 000000000000..1a62e8d435ab --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Kingoftown board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-kingoftown.dtsi" + +/ { + model = "Google Kingoftown (rev0)"; + compatible = "google,kingoftown-rev0", "qcom,sc7180"; +}; + +/* + * In rev1+, the enable pin of pp3300_fp_tp will be tied to pp1800_l10a + * power rail instead, since kingoftown does not have FP. + */ +&pp3300_fp_tp { + gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&en_fp_rails>; +}; + +&tlmm { + en_fp_rails: en-fp-rails { + pinmux { + pins = "gpio74"; + function = "gpio"; + }; + + pinconf { + pins = "gpio74"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts new file mode 100644 index 000000000000..e0752ba7df11 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Kingoftown board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-kingoftown.dtsi" + +/ { + model = "Google Kingoftown (rev1+)"; + compatible = "google,kingoftown", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi new file mode 100644 index 000000000000..74f0e07ea5cf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Kingoftown board device tree source + * + * Copyright 2021 Google LLC. + */ + +/* This file must be included after sc7180-trogdor.dtsi */ +#include <arm/cros-ec-keyboard.dtsi> +#include "sc7180-trogdor-lte-sku.dtsi" + +&alc5682 { + compatible = "realtek,rt5682s"; + realtek,dmic1-clk-pin = <2>; + realtek,dmic-clk-rate-hz = <2048000>; +}; + +&ap_tp_i2c { + status = "okay"; +}; + +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + vcc33-supply = <&pp3300_ts>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + }; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + + CROS_STD_MAIN_KEYMAP + >; +}; + +&panel { + compatible = "edp-panel"; +}; + +&pp3300_dx_edp { + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; +}; + +&sound { + compatible = "google,sc7180-trogdor"; + model = "sc7180-rt5682s-max98357a-1mic"; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_KINGOFTOWN"; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +&en_pp3300_dx_edp { + pinmux { + pins = "gpio67"; + }; + + pinconf { + pins = "gpio67"; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "TP_INT_L", /* 0 */ + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "AP_TP_I2C_SDA", + "AP_TP_I2C_SCL", + "TS_RESET_L", + "TS_INT_L", + "", /* 10 */ + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "", + "", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "HUB_RST_L", + "", + "", + "", /* 20 */ + "", + "", + "AMP_EN", + "", + "", + "", + "", + "HP_IRQ", + "", + "", /* 30 */ + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "BT_UART_CTS", + "BT_UART_RTS", + "BT_UART_TXD", /* 40 */ + "BT_UART_RXD", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", /* 50 */ + "AMP_DIN", + "", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", /* 60 */ + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "EN_PP3300_DX_EDP", + "AP_SPI_CS0_L", + "", + "", /* 70 */ + "", + "", + "", + "EN_FP_RAILS", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT_L", + "UIM1_DATA", + "UIM1_CLK", /* 80 */ + "UIM1_RST", + "", + "CODEC_PWR_EN", + "HUB_EN", + "", + "", + "", + "", + "", + "AP_SKU_ID1", /* 90 */ + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", /* 100 */ + "", + "", + "", + "EDP_BRIJ_EN", + "", + "", + "", + "", + "", + "", /* 110 */ + "", + "", + "", + "", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi index 88f6a7d4d020..2cf7d5212c61 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -6,6 +6,7 @@ */ /* This file must be included after sc7180-trogdor.dtsi */ +#include <arm/cros-ec-keyboard.dtsi> &ap_sar_sensor { semtech,cs0-ground; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts new file mode 100644 index 000000000000..2767817fb053 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Mrbland board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x0 => 0 + * - bits 7..4: Panel ID: 0x0 (AUO) + */ + +/dts-v1/; + +#include "sc7180-trogdor-mrbland-rev0.dtsi" + +/ { + model = "Google Mrbland rev0 AUO panel board"; + compatible = "google,mrbland-rev0-sku0", "qcom,sc7180"; +}; + +&panel { + compatible = "auo,b101uan08.3"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts new file mode 100644 index 000000000000..711485574a03 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Mrbland board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x10 => 16 + * - bits 7..4: Panel ID: 0x1 (BOE) + */ + +/dts-v1/; + +#include "sc7180-trogdor-mrbland-rev0.dtsi" + +/ { + model = "Google Mrbland rev0 BOE panel board"; + compatible = "google,mrbland-rev0-sku16", "qcom,sc7180"; +}; + +&panel { + compatible = "boe,tv101wum-n53"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi new file mode 100644 index 000000000000..7bc8402c018e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Mrbland board device tree source + * + * Copyright 2021 Google LLC. + * + */ + +/dts-v1/; + +#include "sc7180-trogdor-mrbland.dtsi" + +&avdd_lcd { + gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; +}; + +&panel { + enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; +}; + +&v1p8_mipi { + gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; +}; + +/* PINCTRL - modifications to sc7180-trogdor-mrbland.dtsi */ +&avdd_lcd_en { + pinmux { + pins = "gpio80"; + }; + + pinconf { + pins = "gpio80"; + }; +}; + +&mipi_1800_en { + pinmux { + pins = "gpio81"; + }; + + pinconf { + pins = "gpio81"; + }; +}; +&vdd_reset_1800 { + pinmux { + pins = "gpio76"; + }; + + pinconf { + pins = "gpio76"; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts new file mode 100644 index 000000000000..275313ef7554 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Mrbland board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x600 => 1536 + * - bits 11..8: Panel ID: 0x6 (AUO) + */ + +/dts-v1/; + +#include "sc7180-trogdor-mrbland.dtsi" + +/ { + model = "Google Mrbland rev1+ AUO panel board"; + compatible = "google,mrbland-sku1536", "qcom,sc7180"; +}; + +&panel { + compatible = "auo,b101uan08.3"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts new file mode 100644 index 000000000000..87c6b6c30b5e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Mrbland board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x300 => 768 + * - bits 11..8: Panel ID: 0x3 (BOE) + */ + +/dts-v1/; + +#include "sc7180-trogdor-mrbland.dtsi" + +/ { + model = "Google Mrbland (rev1 - 2) BOE panel board"; + /* Uses ID 768 on rev1 and 1024 on rev2+ */ + compatible = "google,mrbland-sku1024", "google,mrbland-sku768", + "qcom,sc7180"; +}; + +&panel { + compatible = "boe,tv101wum-n53"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi new file mode 100644 index 000000000000..97cba7f8064f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi @@ -0,0 +1,350 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Mrbland board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" + +/* This board only has 1 USB Type-C port. */ +/delete-node/ &usb_c1; + +/ { + avdd_lcd: avdd-lcd { + compatible = "regulator-fixed"; + regulator-name = "avdd_lcd"; + + gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&avdd_lcd_en>; + + vin-supply = <&pp5000_a>; + }; + + avee_lcd: avee-lcd { + compatible = "regulator-fixed"; + regulator-name = "avee_lcd"; + + gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&avee_lcd_en>; + + vin-supply = <&pp5000_a>; + }; + + v1p8_mipi: v1p8-mipi { + compatible = "regulator-fixed"; + regulator-name = "v1p8_mipi"; + + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&mipi_1800_en>; + + vin-supply = <&pp3300_a>; + }; +}; + +&backlight { + pwms = <&cros_ec_pwm 0>; +}; + +&camcc { + status = "okay"; +}; + +&cros_ec { + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +}; + +&dsi0 { + + panel: panel@0 { + /* Compatible will be filled in per-board */ + reg = <0>; + enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_reset_1800>; + avdd-supply = <&avdd_lcd>; + avee-supply = <&avee_lcd>; + pp1800-supply = <&v1p8_mipi>; + pp3300-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + rotation = <270>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + ports { + port@1 { + endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&gpio_keys { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@5d { + compatible = "goodix,gt7375p"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + + vdd-supply = <&pp3300_ts>; + }; +}; + +&pp1800_uf_cam { + status = "okay"; +}; + +&pp1800_wf_cam { + status = "okay"; +}; + +&pp2800_uf_cam { + status = "okay"; +}; + +&pp2800_wf_cam { + status = "okay"; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_MRBLAND"; +}; + +/* + * No eDP on this board but it's logically the same signal so just give it + * a new name and assign the proper GPIO. + */ +pp3300_disp_on: &pp3300_dx_edp { + gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +/* + * No eDP on this board but it's logically the same signal so just give it + * a new name and assign the proper GPIO. + */ + +tp_en: &en_pp3300_dx_edp { + pinmux { + pins = "gpio85"; + }; + + pinconf { + pins = "gpio85"; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "HUB_RST_L", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "UF_CAM_EN", + "WF_CAM_EN", + "TS_RESET_L", + "TS_INT_L", + "", + "", + "AP_EDP_BKLTEN", + "UF_CAM_MCLK", + "WF_CAM_CLK", + "", + "", + "UF_CAM_SDA", + "UF_CAM_SCL", + "WF_CAM_SDA", + "WF_CAM_SCL", + "AVEE_LCD_EN", + "", + "AMP_EN", + "", + "", + "", + "", + "HP_IRQ", + "WF_CAM_RST_L", + "UF_CAM_RST_L", + "AP_BRD_ID2", + "", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "BT_UART_CTS", + "BT_UART_RTS", + "BT_UART_TXD", + "BT_UART_RXD", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "PEN_DET_ODL", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "", + "AP_SPI_CS0_L", + "", + "", + "", + "", + "WLAN_SW_CTRL", + "", + "REPORT_E", + "", + "ID0", + "", + "ID1", + "", + "", + "", + "CODEC_PWR_EN", + "HUB_EN", + "TP_EN", + "MIPI_1.8V_EN", + "VDD_RESET_1.8V", + "AVDD_LCD_EN", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "SDM_GRFC_3", + "", + "", + "BOOT_CONFIG_4", + "BOOT_CONFIG_2", + "", + "", + "", + "", + "", + "", + "", + "BOOT_CONFIG_3", + "WCI2_LTE_COEX_TXD", + "WCI2_LTE_COEX_RXD", + "", + "", + "", + "", + "FORCED_USB_BOOT_POL", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; + + avdd_lcd_en: avdd-lcd-en { + pinmux { + pins = "gpio88"; + function = "gpio"; + }; + + pinconf { + pins = "gpio88"; + drive-strength = <2>; + bias-disable; + }; + }; + + avee_lcd_en: avee-lcd-en { + pinmux { + pins = "gpio21"; + function = "gpio"; + }; + + pinconf { + pins = "gpio21"; + drive-strength = <2>; + bias-disable; + }; + }; + + mipi_1800_en: mipi-1800-en { + pinmux { + pins = "gpio86"; + function = "gpio"; + }; + + pinconf { + pins = "gpio86"; + drive-strength = <2>; + bias-disable; + }; + }; + + vdd_reset_1800: vdd-reset-1800 { + pinmux { + pins = "gpio87"; + function = "gpio"; + }; + + pinconf { + pins = "gpio87"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts new file mode 100644 index 000000000000..764c451c1a85 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-pazquel.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Pazquel (Parade,LTE)"; + compatible = "google,pazquel-sku4", "qcom,sc7180"; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts new file mode 100644 index 000000000000..9145b74e9009 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-pazquel.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Pazquel (TI,LTE)"; + compatible = "google,pazquel-sku0", "google,pazquel-sku2", "qcom,sc7180"; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts new file mode 100644 index 000000000000..9a0e6632a786 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" +#include "sc7180-trogdor-pazquel.dtsi" + +/ { + model = "Google Pazquel (Parade)"; + compatible = "google,pazquel-sku5", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts new file mode 100644 index 000000000000..47c5970d8c22 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" +#include "sc7180-trogdor-pazquel.dtsi" + +/ { + model = "Google Pazquel (TI)"; + compatible = "google,pazquel-sku1", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi new file mode 100644 index 000000000000..56d787785fd5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi @@ -0,0 +1,222 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pazquel board device tree source + * + * Copyright 2021 Google LLC. + */ + +/* This file must be included after sc7180-trogdor.dtsi */ +#include <arm/cros-ec-keyboard.dtsi> + +&ap_sar_sensor { + compatible = "semtech,sx9324"; + semtech,ph0-pin = <1 3 3>; + semtech,ph1-pin = <3 1 3>; + semtech,ph2-pin = <1 3 3>; + semtech,ph3-pin = <0 0 0>; + semtech,ph01-resolution = <1024>; + semtech,ph23-resolution = <1024>; + semtech,startup-sensor = <1>; + semtech,ph01-proxraw-strength = <3>; + semtech,ph23-proxraw-strength = <1>; + semtech,avg-pos-strength = <128>; + semtech,input-analog-gain = <0>; + semtech,cs-idle-sleep = "gnd"; + + /delete-property/ svdd-supply; + vdd-supply = <&pp1800_prox>; +}; + +/delete-node/&trackpad; +&ap_tp_i2c { + status = "okay"; + trackpad: trackpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <&pp3300_fp_tp>; + post-power-on-delay-ms = <100>; + hid-descr-addr = <0x0001>; + + wakeup-source; + }; +}; + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + CROS_STD_MAIN_KEYMAP + >; +}; + +&panel { + compatible = "edp-panel"; +}; + +&pp3300_dx_edp { + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; +}; + +&en_pp3300_dx_edp { + pinmux { + pins = "gpio67"; + }; + + pinconf { + pins = "gpio67"; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "TP_INT_ODL", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "AP_TP_I2C_SDA", + "AP_TP_I2C_SCL", + "TS_RESET_L", + "TS_INT_L", + "", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "", + "", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "HUB_RST_L", + "", + "", + "", + "", + "", + "AMP_EN", + "P_SENSOR_INT_L", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "", + "HP_IRQ", + "", + "", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + "", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "EN_PP3300_DX_EDP", + "AP_SPI_CS0_L", + "", + "", + "", + "", + "", + "", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "CODEC_PWR_EN", + "HUB_EN", + "", + "", + "", + "", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi index 3df4920295ad..a7582fb547ee 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi @@ -6,6 +6,8 @@ */ #include "sc7180-trogdor.dtsi" +/* Must come after sc7180-trogdor.dtsi to modify cros_ec */ +#include <arm/cros-ec-keyboard.dtsi> #include "sc7180-trogdor-ti-sn65dsi86.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts new file mode 100644 index 000000000000..35e8945fc56d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Quackingstick board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x600 => 1536 + * - bits 11..8: Panel ID: 0x6 (AUO) + */ + +#include "sc7180-trogdor-quackingstick-r0.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Quackingstick (rev0+) with LTE"; + compatible = "google,quackingstick-sku1536", "qcom,sc7180"; +}; + +&ap_sar_sensor { + compatible = "semtech,sx9324"; + semtech,ph0-pin = <3 1 3>; + semtech,ph1-pin = <2 1 2>; + semtech,ph2-pin = <3 3 1>; + semtech,ph3-pin = <1 3 3>; + semtech,ph01-resolution = <1024>; + semtech,ph23-resolution = <1024>; + semtech,startup-sensor = <1>; + semtech,ph01-proxraw-strength = <3>; + semtech,ph23-proxraw-strength = <3>; + semtech,avg-pos-strength = <256>; + + /delete-property/ svdd-supply; + vdd-supply = <&pp1800_prox>; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts new file mode 100644 index 000000000000..5c81e44ed4a5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Quackingstick board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x601 => 1537 + * - bits 11..8: Panel ID: 0x6 (AUO) + */ + +#include "sc7180-trogdor-quackingstick.dtsi" + +/ { + model = "Google Quackingstick (rev0+)"; + compatible = "google,quackingstick-sku1537", "qcom,sc7180"; +}; + +&dsi_phy { + qcom,phy-rescode-offset-top = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>; + qcom,phy-rescode-offset-bot = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>; + qcom,phy-drive-ldo-level = <375>; +}; + +&panel { + compatible = "auo,b101uan08.3"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi new file mode 100644 index 000000000000..695b04fe7221 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Quackingstick board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" + +/* This board only has 1 USB Type-C port. */ +/delete-node/ &usb_c1; + +/ { + ppvar_lcd: ppvar-lcd { + compatible = "regulator-fixed"; + regulator-name = "ppvar_lcd"; + + gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&ppvar_lcd_en>; + + vin-supply = <&pp5000_a>; + }; + + v1p8_disp: v1p8-disp { + compatible = "regulator-fixed"; + regulator-name = "v1p8_disp"; + + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&pp1800_disp_on>; + + vin-supply = <&pp3300_a>; + }; +}; + +&backlight { + pwms = <&cros_ec_pwm 0>; +}; + +&camcc { + status = "okay"; +}; + +&cros_ec { + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +}; + +&dsi0 { + panel: panel@0 { + /* Compatible will be filled in per-board */ + reg = <0>; + enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rst>; + avdd-supply = <&ppvar_lcd>; + pp1800-supply = <&v1p8_disp>; + pp3300-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + rotation = <270>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + ports { + port@1 { + endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&gpio_keys { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + }; +}; + +&sdhc_2 { + status = "okay"; +}; + +&pp1800_uf_cam { + status = "okay"; +}; + +&pp1800_wf_cam { + status = "okay"; +}; + +&pp2800_uf_cam { + status = "okay"; +}; + +&pp2800_wf_cam { + status = "okay"; +}; + +/* + * No eDP on this board but it's logically the same signal so just give it + * a new name and assign the proper GPIO. + */ +pp3300_disp_on: &pp3300_dx_edp { + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +/* + * No eDP on this board but it's logically the same signal so just give it + * a new name and assign the proper GPIO. + */ + +tp_en: &en_pp3300_dx_edp { + pinmux { + pins = "gpio67"; + }; + + pinconf { + pins = "gpio67"; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "HUB_RST_L", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "UF_CAM_EN", + "WF_CAM_EN", + "TS_RESET_L", + "TS_INT_L", + "", + "", + "AP_EDP_BKLTEN", + "UF_CAM_MCLK", + "WF_CAM_CLK", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "UF_CAM_SDA", + "UF_CAM_SCL", + "WF_CAM_SDA", + "WF_CAM_SCL", + "", + "", + "AMP_EN", + "P_SENSOR_INT_L", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "", + "HP_IRQ", + "WF_CAM_RST_L", + "UF_CAM_RST_L", + "AP_BRD_ID2", + "", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + "", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "", + "", + "AMP_DIN", + "PEN_DET_ODL", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "EN_PP3300_DX_EDP", + "AP_SPI_CS0_L", + "SD_CD_ODL", + "", + "", + "", + "", + "", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT_L", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "CODEC_PWR_EN", + "HUB_EN", + "", + "PP1800_DISP_ON", + "LCD_RST", + "PPVAR_LCD_EN", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AP_TS_I2C_SDA", + "AP_TS_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; + + lcd_rst: lcd-rst { + pinmux { + pins = "gpio87"; + function = "gpio"; + }; + + pinconf { + pins = "gpio87"; + drive-strength = <2>; + bias-disable; + }; + }; + + ppvar_lcd_en: ppvar-lcd-en { + pinmux { + pins = "gpio88"; + function = "gpio"; + }; + + pinconf { + pins = "gpio88"; + drive-strength = <2>; + bias-disable; + }; + }; + + pp1800_disp_on: pp1800-disp-on { + pinmux { + pins = "gpio86"; + function = "gpio"; + }; + + pinconf { + pins = "gpio86"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts index 352827e5740a..59a23d0e9651 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts @@ -8,6 +8,8 @@ /dts-v1/; #include "sc7180-trogdor.dtsi" +/* Must come after sc7180-trogdor.dtsi to modify cros_ec */ +#include <arm/cros-ec-keyboard.dtsi> #include "sc7180-trogdor-ti-sn65dsi86.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts new file mode 100644 index 000000000000..d6ed7d0afe4a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x10 => 16 + * - bits 7..4: Panel ID: 0x1 (BOE) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler-rev0.dtsi" + +/ { + model = "Google Wormdingler rev0 BOE panel board"; + compatible = "google,wormdingler-rev0-sku16", "qcom,sc7180"; +}; + +&panel { + compatible = "boe,tv110c9m-ll3"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts new file mode 100644 index 000000000000..c03525ea64ca --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x0 => 0 + * - bits 7..4: Panel ID: 0x0 (INX) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler-rev0.dtsi" + +/ { + model = "Google Wormdingler rev0 INX panel board"; + compatible = "google,wormdingler-rev0-sku0", "qcom,sc7180"; +}; + +&panel { + compatible = "innolux,hj110iz-01a"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi new file mode 100644 index 000000000000..db29e0cba29d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler.dtsi" + +&avdd_lcd { + gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; +}; + +&panel { + enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; +}; + +&v1p8_mipi { + gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; +}; + +/* PINCTRL - modifications to sc7180-trogdor-wormdingler.dtsi */ +&avdd_lcd_en { + pinmux { + pins = "gpio80"; + }; + + pinconf { + pins = "gpio80"; + }; +}; + +&mipi_1800_en { + pinmux { + pins = "gpio81"; + }; + + pinconf { + pins = "gpio81"; + }; +}; +&vdd_reset_1800 { + pinmux { + pins = "gpio76"; + }; + + pinconf { + pins = "gpio76"; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts new file mode 100644 index 000000000000..aa605885c371 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x401 => 1025 + * - bits 11..8: Panel ID: 0x4 (BOE) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler-rev1-boe.dts" + +/ { + model = "Google Wormdingler rev1+ (BOE, rt5682s)"; + compatible = "google,wormdingler-sku1025", "qcom,sc7180"; +}; + +&alc5682 { + compatible = "realtek,rt5682s"; + realtek,dmic1-clk-pin = <2>; + realtek,dmic-clk-rate-hz = <2048000>; +}; + +&sound { + compatible = "google,sc7180-trogdor"; + model = "sc7180-rt5682s-max98357a-1mic"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts new file mode 100644 index 000000000000..c5b0658bd632 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x400 => 1024 + * - bits 11..8: Panel ID: 0x4 (BOE) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler.dtsi" + +/ { + model = "Google Wormdingler rev1+ BOE panel board"; + compatible = "google,wormdingler-sku1024", "qcom,sc7180"; +}; + +&dsi_phy { + qcom,phy-rescode-offset-top = /bits/ 8 <31 31 31 31 (-32)>; + qcom,phy-rescode-offset-bot = /bits/ 8 <31 31 31 31 (-32)>; + qcom,phy-drive-ldo-level = <450>; +}; + +&panel { + compatible = "boe,tv110c9m-ll3"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts new file mode 100644 index 000000000000..7116c44c8d85 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x0001 => 1 + * - bits 11..8: Panel ID: 0x0 (INX) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler-rev1-inx.dts" + +/ { + model = "Google Wormdingler rev1+ (INX, rt5682s)"; + compatible = "google,wormdingler-sku1", "qcom,sc7180"; +}; + +&alc5682 { + compatible = "realtek,rt5682s"; + realtek,dmic1-clk-pin = <2>; + realtek,dmic-clk-rate-hz = <2048000>; +}; + +&sound { + compatible = "google,sc7180-trogdor"; + model = "sc7180-rt5682s-max98357a-1mic"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts new file mode 100644 index 000000000000..dd34a2297ea0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + * + * SKU: 0x0000 => 0 + * - bits 11..8: Panel ID: 0x0 (INX) + */ + +/dts-v1/; + +#include "sc7180-trogdor-wormdingler.dtsi" + +/ { + model = "Google Wormdingler rev1+ INX panel board"; + compatible = "google,wormdingler-sku0", "qcom,sc7180"; +}; + +&panel { + compatible = "innolux,hj110iz-01a"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi new file mode 100644 index 000000000000..6312108e8b3e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi @@ -0,0 +1,412 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Wormdingler board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor.dtsi" + +/ { + avdd_lcd: avdd-lcd { + compatible = "regulator-fixed"; + regulator-name = "avdd_lcd"; + + gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&avdd_lcd_en>; + + vin-supply = <&pp5000_a>; + }; + + avee_lcd: avee-lcd { + compatible = "regulator-fixed"; + regulator-name = "avee_lcd"; + + gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&avee_lcd_en>; + + vin-supply = <&pp5000_a>; + }; + + pp1800_ts: + v1p8_mipi: v1p8-mipi { + compatible = "regulator-fixed"; + regulator-name = "v1p8_mipi"; + + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&mipi_1800_en>; + + vin-supply = <&pp3300_a>; + }; + + thermal-zones { + skin_temp_thermal: skin-temp-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&pm6150_adc_tm 1>; + sustainable-power = <574>; + + trips { + skin_temp_alert0: trip-point0 { + temperature = <58000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin_temp_alert1: trip-point1 { + temperature = <62500>; + hysteresis = <1000>; + type = "passive"; + }; + + skin-temp-crit { + temperature = <68000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&skin_temp_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&skin_temp_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; +}; + +&backlight { + pwms = <&cros_ec_pwm 0>; +}; + +&camcc { + status = "okay"; +}; + +&cros_ec { + base_detection: cbas { + compatible = "google,cros-cbas"; + }; + + keyboard-controller { + compatible = "google,cros-ec-keyb-switches"; + }; +}; + +&dsi0 { + + panel: panel@0 { + reg = <0>; + enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_reset_1800>; + avdd-supply = <&avdd_lcd>; + avee-supply = <&avee_lcd>; + pp1800-supply = <&v1p8_mipi>; + pp3300-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + rotation = <270>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + ports { + port@1 { + endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@1 { + compatible = "hid-over-i2c"; + reg = <0x01>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <70>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + vddl-supply = <&pp1800_ts>; + }; +}; + +&pm6150_adc { + skin-temp-thermistor@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + skin-temp-thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pp1800_uf_cam { + status = "okay"; +}; + +&pp1800_wf_cam { + status = "okay"; +}; + +&pp2800_uf_cam { + status = "okay"; +}; + +&pp2800_wf_cam { + status = "okay"; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_WORMDINGLER"; +}; + +/* + * No eDP on this board but it's logically the same signal so just give it + * a new name and assign the proper GPIO. + */ +pp3300_disp_on: &pp3300_dx_edp { + gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +/* + * No eDP on this board but it's logically the same signal so just give it + * a new name and assign the proper GPIO. + */ + +tp_en: &en_pp3300_dx_edp { + pinmux { + pins = "gpio85"; + }; + + pinconf { + pins = "gpio85"; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "HUB_RST_L", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "UF_CAM_EN", + "WF_CAM_EN", + "TS_RESET_L", + "TS_INT_L", + "", + "", + "AP_EDP_BKLTEN", + "UF_CAM_MCLK", + "WF_CAM_CLK", + "", + "", + "UF_CAM_SDA", + "UF_CAM_SCL", + "WF_CAM_SDA", + "WF_CAM_SCL", + "AVEE_LCD_EN", + "", + "AMP_EN", + "", + "", + "", + "", + "HP_IRQ", + "WF_CAM_RST_L", + "UF_CAM_RST_L", + "AP_BRD_ID2", + "", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "BT_UART_CTS", + "BT_UART_RTS", + "BT_UART_TXD", + "BT_UART_RXD", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "", + "AP_SPI_CS0_L", + "", + "", + "", + "", + "WLAN_SW_CTRL", + "", + "REPORT_E", + "", + "ID0", + "", + "ID1", + "", + "", + "", + "CODEC_PWR_EN", + "HUB_EN", + "TP_EN", + "MIPI_1.8V_EN", + "VDD_RESET_1.8V", + "AVDD_LCD_EN", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "SDM_GRFC_3", + "", + "", + "BOOT_CONFIG_4", + "BOOT_CONFIG_2", + "", + "", + "", + "", + "", + "", + "", + "BOOT_CONFIG_3", + "WCI2_LTE_COEX_TXD", + "WCI2_LTE_COEX_RXD", + "", + "", + "", + "", + "FORCED_USB_BOOT_POL", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; + + avdd_lcd_en: avdd-lcd-en { + pinmux { + pins = "gpio88"; + function = "gpio"; + }; + + pinconf { + pins = "gpio88"; + drive-strength = <2>; + bias-disable; + }; + }; + + avee_lcd_en: avee-lcd-en { + pinmux { + pins = "gpio21"; + function = "gpio"; + }; + + pinconf { + pins = "gpio21"; + drive-strength = <2>; + bias-disable; + }; + }; + + mipi_1800_en: mipi-1800-en { + pinmux { + pins = "gpio86"; + function = "gpio"; + }; + + pinconf { + pins = "gpio86"; + drive-strength = <2>; + bias-disable; + }; + }; + + vdd_reset_1800: vdd-reset-1800 { + pinmux { + pins = "gpio87"; + function = "gpio"; + }; + + pinconf { + pins = "gpio87"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index e55dbaa6dc12..b5f534db135a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/sc7180-lpass.h> @@ -43,6 +44,7 @@ */ /delete-node/ &hyp_mem; +/delete-node/ &ipa_fw_mem; /delete-node/ &xbl_mem; /delete-node/ &aop_mem; /delete-node/ &sec_apps_mem; @@ -330,7 +332,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pen_pdct_l>; - pen_insert: pen-insert { + pen_insert: switch-pen-insert { label = "Pen Insert"; /* Insert = low, eject = high */ @@ -355,6 +357,7 @@ keyboard_backlight: keyboard-backlight { status = "disabled"; label = "cros_ec::kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; pwms = <&cros_ec_pwm 0>; max-brightness = <1023>; }; @@ -812,8 +815,6 @@ hp_i2c: &i2c9 { pinctrl-names = "default"; pinctrl-0 = <&dp_hot_plug_det>; data-lanes = <0 1>; - vdda-1p2-supply = <&vdda_usb_ss_dp_1p2>; - vdda-0p9-supply = <&vdda_usb_ss_dp_core>; }; &pm6150_adc { @@ -903,7 +904,6 @@ ap_spi_fp: &spi10 { }; }; -#include <arm/cros-ec-keyboard.dtsi> #include <arm/cros-ec-sbs.dtsi> &uart3 { diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 5dcaac23a138..b82c335c25af 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -398,7 +398,7 @@ }; }; - cpu0_opp_table: cpu0_opp_table { + cpu0_opp_table: opp-table-cpu0 { compatible = "operating-points-v2"; opp-shared; @@ -453,7 +453,7 @@ }; }; - cpu6_opp_table: cpu6_opp_table { + cpu6_opp_table: opp-table-cpu6 { compatible = "operating-points-v2"; opp-shared; @@ -693,7 +693,7 @@ }; }; - sdhc_1: sdhci@7c4000 { + sdhc_1: mmc@7c4000 { compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x7c4000 0 0x1000>, <0 0x07c5000 0 0x1000>; @@ -704,10 +704,10 @@ <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, <&rpmhcc RPMH_CXO_CLK>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>, <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>; interconnect-names = "sdhc-ddr","cpu-sdhc"; @@ -725,7 +725,7 @@ status = "disabled"; - sdhc1_opp_table: sdhc1-opp-table { + sdhc1_opp_table: opp-table { compatible = "operating-points-v2"; opp-100000000 { @@ -744,7 +744,7 @@ }; }; - qup_opp_table: qup-opp-table { + qup_opp_table: opp-table-qup { compatible = "operating-points-v2"; opp-75000000 { @@ -2048,7 +2048,7 @@ }; gmu: gmu@506a000 { - compatible="qcom,adreno-gmu-618.0", "qcom,adreno-gmu"; + compatible = "qcom,adreno-gmu-618.0", "qcom,adreno-gmu"; reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 0 0x10000>, <0 0x0b490000 0 0x10000>; reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; @@ -2578,7 +2578,7 @@ }; }; - sdhc_2: sdhci@8804000 { + sdhc_2: mmc@8804000 { compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; @@ -2587,10 +2587,10 @@ <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, <&rpmhcc RPMH_CXO_CLK>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>; @@ -2602,7 +2602,7 @@ status = "disabled"; - sdhc2_opp_table: sdhc2-opp-table { + sdhc2_opp_table: opp-table { compatible = "operating-points-v2"; opp-100000000 { @@ -2621,7 +2621,7 @@ }; }; - qspi_opp_table: qspi-opp-table { + qspi_opp_table: opp-table-qspi { compatible = "operating-points-v2"; opp-75000000 { @@ -2825,7 +2825,7 @@ compatible = "venus-encoder"; }; - venus_opp_table: venus-opp-table { + venus_opp_table: opp-table { compatible = "operating-points-v2"; opp-150000000 { @@ -2896,9 +2896,6 @@ <&dispcc DISP_CC_MDSS_MDP_CLK>; clock-names = "iface", "ahb", "core"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; - assigned-clock-rates = <300000000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <1>; @@ -2914,7 +2911,7 @@ status = "disabled"; - mdp: mdp@ae01000 { + mdp: display-controller@ae01000 { compatible = "qcom,sc7180-dpu"; reg = <0 0x0ae01000 0 0x8f000>, <0 0x0aeb0000 0 0x2008>; @@ -2928,12 +2925,10 @@ <&dispcc DISP_CC_MDSS_VSYNC_CLK>; clock-names = "bus", "iface", "rot", "lut", "core", "vsync"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>, <&dispcc DISP_CC_MDSS_ROT_CLK>, <&dispcc DISP_CC_MDSS_AHB_CLK>; - assigned-clock-rates = <300000000>, - <19200000>, + assigned-clock-rates = <19200000>, <19200000>, <19200000>; operating-points-v2 = <&mdp_opp_table>; @@ -2963,7 +2958,7 @@ }; }; - mdp_opp_table: mdp-opp-table { + mdp_opp_table: opp-table { compatible = "operating-points-v2"; opp-200000000 { @@ -3042,7 +3037,7 @@ }; }; - dsi_opp_table: dsi-opp-table { + dsi_opp_table: opp-table { compatible = "operating-points-v2"; opp-187500000 { @@ -3085,7 +3080,11 @@ compatible = "qcom,sc7180-dp"; status = "disabled"; - reg = <0 0x0ae90000 0 0x1400>; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0xc00>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; interrupt-parent = <&mdss>; interrupts = <12>; @@ -3097,7 +3096,6 @@ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; clock-names = "core_iface", "core_aux", "ctrl_link", "ctrl_link_iface", "stream_pixel"; - #clock-cells = <1>; assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; @@ -3215,7 +3213,7 @@ }; aoss_qmp: power-controller@c300000 { - compatible = "qcom,sc7180-aoss-qmp"; + compatible = "qcom,sc7180-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; mboxes = <&apss_shared 0>; @@ -3247,8 +3245,8 @@ cell-index = <0>; }; - imem@146aa000 { - compatible = "simple-mfd"; + sram@146aa000 { + compatible = "qcom,sc7180-imem", "syscon", "simple-mfd"; reg = <0 0x146aa000 0 0x2000>; #address-cells = <1>; @@ -3384,9 +3382,9 @@ }; timer@17c20000{ - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; compatible = "arm,armv7-timer-mem"; reg = <0 0x17c20000 0 0x1000>; @@ -3394,49 +3392,49 @@ frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c21000 0 0x1000>, - <0 0x17c22000 0 0x1000>; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; }; frame@17c23000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c23000 0 0x1000>; + reg = <0x17c23000 0x1000>; status = "disabled"; }; frame@17c25000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c25000 0 0x1000>; + reg = <0x17c25000 0x1000>; status = "disabled"; }; frame@17c27000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c27000 0 0x1000>; + reg = <0x17c27000 0x1000>; status = "disabled"; }; frame@17c29000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c29000 0 0x1000>; + reg = <0x17c29000 0x1000>; status = "disabled"; }; frame@17c2b000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c2b000 0 0x1000>; + reg = <0x17c2b000 0x1000>; status = "disabled"; }; frame@17c2d000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c2d000 0 0x1000>; + reg = <0x17c2d000 0x1000>; status = "disabled"; }; }; @@ -3584,7 +3582,7 @@ compatible = "qcom,sc7180-lpass-cpu"; reg = <0 0x62d87000 0 0x68000>, <0 0x62f00000 0 0x29000>; - reg-names = "lpass-hdmiif", "lpass-lpaif"; + reg-names = "lpass-hdmiif", "lpass-lpaif"; iommus = <&apps_smmu 0x1020 0>, <&apps_smmu 0x1021 0>, diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi index 9f4a9c263c35..cfe2741456a1 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi @@ -88,10 +88,26 @@ status = "okay"; compatible = "qcom,sc7280-mss-pil"; iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>; + interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>; memory-region = <&mba_mem>, <&mpss_mem>; + firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn", + "qcom/sc7280-herobrine/modem/qdsp6sw.mbn"; +}; + +&remoteproc_wpss { + status = "okay"; + firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt"; }; /* Increase the size from 2.5MB to 8MB */ &rmtfs_mem { reg = <0x0 0x9c900000 0x0 0x800000>; }; + +&wifi { + status = "okay"; + + wifi-firmware { + iommus = <&apps_smmu 0x1c02 0x1>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi new file mode 100644 index 000000000000..859faaa8b7e0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * sc7280 device tree source for boards using Max98360 and wcd9385 codec + * + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ + +/* PINCTRL */ + +&lpass_dmic01_clk { + drive-strength = <8>; + bias-disable; +}; + +&lpass_dmic01_clk_sleep { + drive-strength = <2>; +}; + +&lpass_dmic01_data { + bias-pull-down; +}; + +&lpass_dmic23_clk { + drive-strength = <8>; + bias-disable; +}; + +&lpass_dmic23_clk_sleep { + drive-strength = <2>; +}; + +&lpass_dmic23_data { + bias-pull-down; +}; + +&lpass_rx_swr_clk { + drive-strength = <2>; + slew-rate = <1>; + bias-disable; +}; + +&lpass_rx_swr_clk_sleep { + bias-pull-down; +}; + +&lpass_rx_swr_data { + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; +}; + +&lpass_rx_swr_data_sleep { + bias-pull-down; +}; + +&lpass_tx_swr_clk { + drive-strength = <2>; + slew-rate = <1>; + bias-disable; +}; + +&lpass_tx_swr_clk_sleep { + bias-pull-down; +}; + +&lpass_tx_swr_data { + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; +}; + +&mi2s1_data0 { + drive-strength = <6>; + bias-disable; +}; + +&mi2s1_sclk { + drive-strength = <6>; + bias-disable; +}; + +&mi2s1_ws { + drive-strength = <6>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts index a4ac33c4fd59..7881bbc641a0 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "sc7280-herobrine.dtsi" +#include "sc7280-herobrine-audio-wcd9385.dtsi" / { model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)"; @@ -134,6 +135,17 @@ ap_ts_pen_1v8: &i2c13 { status = "okay"; }; +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +/* + * This pin goes to the display panel but then doesn't actually do anything + * on the panel itself (it doesn't connect to the touchscreen controller). + * We'll set a pullup here just to park the line. + */ +&ts_rst_conn { + bias-pull-up; +}; + /* PINCTRL - BOARD-SPECIFIC */ /* diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts index b69ca09d9bfb..c1647a85a371 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts @@ -128,6 +128,17 @@ ts_i2c: &i2c13 { status = "okay"; }; +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +/* + * This pin goes to the display panel but then doesn't actually do anything + * on the panel itself (it doesn't connect to the touchscreen controller). + * We'll set a pullup here just to park the line. + */ +&ts_rst_conn { + bias-pull-up; +}; + /* PINCTRL - BOARD-SPECIFIC */ /* diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts index d3d6ffad4eff..2cacafd8faa8 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts @@ -46,6 +46,25 @@ ap_tp_i2c: &i2c0 { }; }; +ts_i2c: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth6915"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; + + interrupt-parent = <&tlmm>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; + + vcc33-supply = <&ts_avdd>; + }; +}; + &ap_sar_sensor_i2c { status = "okay"; }; @@ -76,11 +95,21 @@ ap_tp_i2c: &i2c0 { status = "okay"; }; +&pwmleds { + status = "okay"; +}; + /* For eMMC */ &sdhc_1 { status = "okay"; }; +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +&ts_rst_conn { + bias-disable; +}; + /* PINCTRL - BOARD-SPECIFIC */ /* diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index 9cb1bc8ed6b5..3f8996c00b05 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include "sc7280-qcard.dtsi" #include "sc7280-chrome-common.dtsi" @@ -295,12 +296,12 @@ /* BOARD-SPECIFIC TOP LEVEL NODES */ - pwmleds { + pwmleds: pwmleds { compatible = "pwm-leds"; status = "disabled"; keyboard_backlight: keyboard-backlight { - status = "disabled"; label = "cros_ec::kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; pwms = <&cros_ec_pwm 0>; max-brightness = <1023>; }; @@ -388,7 +389,7 @@ ap_sar_sensor_i2c: &i2c1 { vdd-supply = <&pp1800_prox>; - label = "proximity-wifi-lte0"; + label = "proximity-wifi_cellular-0"; status = "disabled"; }; @@ -404,7 +405,7 @@ ap_sar_sensor_i2c: &i2c1 { vdd-supply = <&pp1800_prox>; - label = "proximity-wifi-lte1"; + label = "proximity-wifi_cellular-1"; status = "disabled"; }; }; @@ -429,6 +430,13 @@ ap_i2c_tpm: &i2c14 { status = "okay"; }; +&mdss_dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hot_plug_det>; + data-lanes = <0 1>; +}; + &mdss_mdp { status = "okay"; }; @@ -476,6 +484,10 @@ ap_i2c_tpm: &i2c14 { cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; }; +&spi_flash { + spi-max-frequency = <50000000>; +}; + /* Fingerprint, enabled on a per-board basis */ ap_spi_fp: &spi9 { pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs_gpio_init_high>, <&qup_spi9_cs_gpio>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 5eb668991e24..a74e0b730db6 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -27,7 +27,7 @@ pinctrl-names = "default"; pinctrl-0 = <&key_vol_up_default>; - volume-up { + key-volume-up { label = "volume_up"; gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -367,8 +367,84 @@ bias-disable; }; +&lpass_dmic01_clk { + drive-strength = <8>; + bias-disable; +}; + +&lpass_dmic01_clk_sleep { + drive-strength = <2>; +}; + +&lpass_dmic01_data { + bias-pull-down; +}; + +&lpass_dmic23_clk { + drive-strength = <8>; + bias-disable; +}; + +&lpass_dmic23_clk_sleep { + drive-strength = <2>; +}; + +&lpass_dmic23_data { + bias-pull-down; +}; + +&lpass_rx_swr_clk { + drive-strength = <2>; + slew-rate = <1>; + bias-disable; +}; + +&lpass_rx_swr_clk_sleep { + bias-pull-down; +}; + +&lpass_rx_swr_data { + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; +}; + +&lpass_rx_swr_data_sleep { + bias-pull-down; +}; + +&lpass_tx_swr_clk { + drive-strength = <2>; + slew-rate = <1>; + bias-disable; +}; + +&lpass_tx_swr_clk_sleep { + bias-pull-down; +}; + +&lpass_tx_swr_data { + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; +}; + +&mi2s1_data0 { + drive-strength = <6>; + bias-disable; +}; + +&mi2s1_sclk { + drive-strength = <6>; + bias-disable; +}; + +&mi2s1_ws { + drive-strength = <6>; +}; + &pm7325_gpios { - key_vol_up_default: key-vol-up-default { + key_vol_up_default: key-vol-up-state { pins = "gpio6"; function = "normal"; input-enable; @@ -560,14 +636,3 @@ bias-pull-down; }; }; - -&remoteproc_wpss { - status = "okay"; -}; - -&wifi { - status = "okay"; - wifi-firmware { - iommus = <&apps_smmu 0x1c02 0x1>; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index d59002d4492e..7adf31bb9827 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -123,6 +123,12 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + vreg_l17b_1p8: ldo17 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vdd_px_wcd9385: vdd_txrx: vddpx_0: @@ -305,9 +311,6 @@ /* NOTE: Not all Qcards have eDP connector stuffed */ &mdss_edp { - vdda-0p9-supply = <&vdd_a_edp_0_0p9>; - vdda-1p2-supply = <&vdd_a_edp_0_1p2>; - aux-bus { edp_panel: panel { compatible = "edp-panel"; @@ -517,7 +520,7 @@ mos_bt_uart: &uart7 { */ &pm8350c_gpios { - pmic_edp_bl_en: pmic-edp-bl-en { + pmic_edp_bl_en: pmic-edp-bl-en-state { pins = "gpio7"; function = "normal"; bias-disable; @@ -527,7 +530,7 @@ mos_bt_uart: &uart7 { output-low; }; - pmic_edp_bl_pwm: pmic-edp-bl-pwm { + pmic_edp_bl_pwm: pmic-edp-bl-pwm-state { pins = "gpio8"; function = "func1"; bias-disable; @@ -604,7 +607,6 @@ mos_bt_uart: &uart7 { ts_rst_conn: ts-rst-conn { pins = "gpio54"; function = "gpio"; - bias-pull-up; drive-strength = <2>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index e66fc67de206..13d7f267b289 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -417,7 +417,7 @@ }; }; - cpu0_opp_table: cpu0-opp-table { + cpu0_opp_table: opp-table-cpu0 { compatible = "operating-points-v2"; opp-shared; @@ -477,7 +477,7 @@ }; }; - cpu4_opp_table: cpu4-opp-table { + cpu4_opp_table: opp-table-cpu4 { compatible = "operating-points-v2"; opp-shared; @@ -547,7 +547,7 @@ }; }; - cpu7_opp_table: cpu7-opp-table { + cpu7_opp_table: opp-table-cpu7 { compatible = "operating-points-v2"; opp-shared; @@ -763,7 +763,7 @@ method = "smc"; }; - qspi_opp_table: qspi-opp-table { + qspi_opp_table: opp-table-qspi { compatible = "operating-points-v2"; opp-75000000 { @@ -787,7 +787,7 @@ }; }; - qup_opp_table: qup-opp-table { + qup_opp_table: opp-table-qup { compatible = "operating-points-v2"; opp-75000000 { @@ -818,7 +818,7 @@ reg = <0 0x00100000 0 0x1f0000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, - <0>, <&pcie1_lane 0>, + <0>, <&pcie1_lane>, <0>, <0>, <0>, <0>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", "pcie_0_pipe_clk", "pcie_1_pipe_clk", @@ -857,7 +857,7 @@ }; }; - sdhc_1: sdhci@7c4000 { + sdhc_1: mmc@7c4000 { compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>; @@ -873,10 +873,10 @@ <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, <&rpmhcc RPMH_CXO_CLK>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; interconnects = <&aggre1_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_1 0>; interconnect-names = "sdhc-ddr","cpu-sdhc"; @@ -2035,7 +2035,7 @@ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, - <&pcie1_lane 0>, + <&pcie1_lane>, <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_PCIE_1_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, @@ -2110,7 +2110,7 @@ clock-names = "pipe0"; #phy-cells = <0>; - #clock-cells = <1>; + #clock-cells = <0>; clock-output-names = "pcie_1_pipe_clk"; }; }; @@ -2201,7 +2201,7 @@ lpasscore: clock-controller@3900000 { compatible = "qcom,sc7280-lpasscorecc"; reg = <0 0x03900000 0 0x50000>; - clocks = <&rpmhcc RPMH_CXO_CLK>; + clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "bi_tcxo"; power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>; #clock-cells = <1>; @@ -2224,6 +2224,98 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + lpass_tlmm: pinctrl@33c0000 { + compatible = "qcom,sc7280-lpass-lpi-pinctrl"; + reg = <0 0x033c0000 0x0 0x20000>, + <0 0x03550000 0x0 0x10000>; + qcom,adsp-bypass-mode; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 15>; + + #clock-cells = <1>; + + lpass_dmic01_clk: dmic01-clk { + pins = "gpio6"; + function = "dmic1_clk"; + }; + + lpass_dmic01_clk_sleep: dmic01-clk-sleep { + pins = "gpio6"; + function = "dmic1_clk"; + }; + + lpass_dmic01_data: dmic01-data { + pins = "gpio7"; + function = "dmic1_data"; + }; + + lpass_dmic01_data_sleep: dmic01-data-sleep { + pins = "gpio7"; + function = "dmic1_data"; + }; + + lpass_dmic23_clk: dmic23-clk { + pins = "gpio8"; + function = "dmic2_clk"; + }; + + lpass_dmic23_clk_sleep: dmic23-clk-sleep { + pins = "gpio8"; + function = "dmic2_clk"; + }; + + lpass_dmic23_data: dmic23-data { + pins = "gpio9"; + function = "dmic2_data"; + }; + + lpass_dmic23_data_sleep: dmic23-data-sleep { + pins = "gpio9"; + function = "dmic2_data"; + }; + + lpass_rx_swr_clk: rx-swr-clk { + pins = "gpio3"; + function = "swr_rx_clk"; + }; + + lpass_rx_swr_clk_sleep: rx-swr-clk-sleep { + pins = "gpio3"; + function = "swr_rx_clk"; + }; + + lpass_rx_swr_data: rx-swr-data { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + }; + + lpass_rx_swr_data_sleep: rx-swr-data-sleep { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + }; + + lpass_tx_swr_clk: tx-swr-clk { + pins = "gpio0"; + function = "swr_tx_clk"; + }; + + lpass_tx_swr_clk_sleep: tx-swr-clk-sleep { + pins = "gpio0"; + function = "swr_tx_clk"; + }; + + lpass_tx_swr_data: tx-swr-data { + pins = "gpio1", "gpio2", "gpio14"; + function = "swr_tx_data"; + }; + + lpass_tx_swr_data_sleep: tx-swr-data-sleep { + pins = "gpio1", "gpio2", "gpio14"; + function = "swr_tx_data"; + }; + }; + gpu: gpu@3d00000 { compatible = "qcom,adreno-635.0", "qcom,adreno"; reg = <0 0x03d00000 0 0x40000>, @@ -2305,7 +2397,7 @@ }; gmu: gmu@3d6a000 { - compatible="qcom,adreno-gmu-635.0", "qcom,adreno-gmu"; + compatible = "qcom,adreno-gmu-635.0", "qcom,adreno-gmu"; reg = <0 0x03d6a000 0 0x34000>, <0 0x3de0000 0 0x10000>, <0 0x0b290000 0 0x10000>; @@ -2313,13 +2405,13 @@ interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hfi", "gmu"; - clocks = <&gpucc 5>, - <&gpucc 8>, - <&gcc GCC_DDRSS_GPU_AXI_CLK>, - <&gcc GCC_GPU_MEMNOC_GFX_CLK>, - <&gpucc 2>, - <&gpucc 15>, - <&gpucc 11>; + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>; clock-names = "gmu", "cxo", "axi", @@ -2327,8 +2419,8 @@ "ahb", "hub", "smmu_vote"; - power-domains = <&gpucc 0>, - <&gpucc 1>; + power-domains = <&gpucc GPU_CC_CX_GDSC>, + <&gpucc GPU_CC_GX_GDSC>; power-domain-names = "cx", "gx"; iommus = <&adreno_smmu 5 0x400>; @@ -2377,12 +2469,12 @@ <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, - <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, - <&gpucc 2>, - <&gpucc 11>, - <&gpucc 5>, - <&gpucc 15>, - <&gpucc 13>; + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HUB_AON_CLK>; clock-names = "gcc_gpu_memnoc_gfx_clk", "gcc_gpu_snoc_dvm_gfx_clk", "gpu_cc_ahb_clk", @@ -2391,7 +2483,7 @@ "gpu_cc_hub_cx_int_clk", "gpu_cc_hub_aon_clk"; - power-domains = <&gpucc 0>; + power-domains = <&gpucc GPU_CC_CX_GDSC>; }; remoteproc_mpss: remoteproc@4080000 { @@ -2936,7 +3028,7 @@ }; }; - sdhc_2: sdhci@8804000 { + sdhc_2: mmc@8804000 { compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>; @@ -2950,10 +3042,10 @@ <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, <&rpmhcc RPMH_CXO_CLK>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_2 0>; interconnect-names = "sdhc-ddr","cpu-sdhc"; @@ -3082,10 +3174,11 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 13 IRQ_TYPE_EDGE_RISING>, - <&pdc 12 IRQ_TYPE_EDGE_RISING>; + <&pdc 12 IRQ_TYPE_EDGE_RISING>, + <&pdc 13 IRQ_TYPE_EDGE_RISING>; interrupt-names = "hs_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + "dp_hs_phy_irq", + "dm_hs_phy_irq"; power-domains = <&gcc GCC_USB30_SEC_GDSC>; @@ -3265,13 +3358,13 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 17 IRQ_TYPE_EDGE_BOTH>, + <&pdc 14 IRQ_TYPE_LEVEL_HIGH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 14 IRQ_TYPE_LEVEL_HIGH>; + <&pdc 17 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", - "ss_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", - "dp_hs_phy_irq"; + "ss_phy_irq"; power-domains = <&gcc GCC_USB30_PRIM_GDSC>; @@ -3334,7 +3427,7 @@ iommus = <&apps_smmu 0x21a2 0x0>; }; - venus_opp_table: venus-opp-table { + venus_opp_table: opp-table { compatible = "operating-points-v2"; opp-133330000 { @@ -3426,9 +3519,6 @@ "ahb", "core"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; - assigned-clock-rates = <300000000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <1>; @@ -3462,11 +3552,9 @@ "lut", "core", "vsync"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>, <&dispcc DISP_CC_MDSS_AHB_CLK>; - assigned-clock-rates = <300000000>, - <19200000>, + assigned-clock-rates = <19200000>, <19200000>; operating-points-v2 = <&mdp_opp_table>; power-domains = <&rpmhpd SC7280_CX>; @@ -3629,21 +3717,16 @@ interrupt-parent = <&mdss>; interrupts = <14>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_EDP_CLKREF_EN>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>, <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>, <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>, <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>; - clock-names = "core_xo", - "core_ref", - "core_iface", + clock-names = "core_iface", "core_aux", "ctrl_link", "ctrl_link_iface", "stream_pixel"; - #clock-cells = <1>; assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>, <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>; assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>; @@ -3654,9 +3737,6 @@ operating-points-v2 = <&edp_opp_table>; power-domains = <&rpmhpd SC7280_CX>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; ports { @@ -3723,7 +3803,11 @@ mdss_dp: displayport-controller@ae90000 { compatible = "qcom,sc7280-dp"; - reg = <0 0x0ae90000 0 0x1400>; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0xc00>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; interrupt-parent = <&mdss>; interrupts = <12>; @@ -3733,12 +3817,11 @@ <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; - clock-names = "core_iface", + clock-names = "core_iface", "core_aux", "ctrl_link", "ctrl_link_iface", "stream_pixel"; - #clock-cells = <1>; assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; @@ -3843,7 +3926,7 @@ }; aoss_qmp: power-controller@c300000 { - compatible = "qcom,sc7280-aoss-qmp"; + compatible = "qcom,sc7280-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP @@ -3898,6 +3981,46 @@ function = "edp_hot"; }; + mi2s0_data0: mi2s0-data0 { + pins = "gpio98"; + function = "mi2s0_data0"; + }; + + mi2s0_data1: mi2s0-data1 { + pins = "gpio99"; + function = "mi2s0_data1"; + }; + + mi2s0_mclk: mi2s0-mclk { + pins = "gpio96"; + function = "pri_mi2s"; + }; + + mi2s0_sclk: mi2s0-sclk { + pins = "gpio97"; + function = "mi2s0_sck"; + }; + + mi2s0_ws: mi2s0-ws { + pins = "gpio100"; + function = "mi2s0_ws"; + }; + + mi2s1_data0: mi2s1-data0 { + pins = "gpio107"; + function = "mi2s1_data0"; + }; + + mi2s1_sclk: mi2s1-sclk { + pins = "gpio106"; + function = "mi2s1_sck"; + }; + + mi2s1_ws: mi2s1-ws { + pins = "gpio108"; + function = "mi2s1_ws"; + }; + pcie1_clkreq_n: pcie1-clkreq-n { pins = "gpio79"; function = "pcie1_clkreqn"; @@ -4639,8 +4762,8 @@ }; }; - imem@146a5000 { - compatible = "qcom,sc7280-imem", "syscon"; + sram@146a5000 { + compatible = "qcom,sc7280-imem", "syscon", "simple-mfd"; reg = <0 0x146a5000 0 0x6000>; #address-cells = <1>; @@ -4771,9 +4894,9 @@ }; timer@17c20000 { - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; compatible = "arm,armv7-timer-mem"; reg = <0 0x17c20000 0 0x1000>; @@ -4781,49 +4904,49 @@ frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c21000 0 0x1000>, - <0 0x17c22000 0 0x1000>; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; }; frame@17c23000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c23000 0 0x1000>; + reg = <0x17c23000 0x1000>; status = "disabled"; }; frame@17c25000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c25000 0 0x1000>; + reg = <0x17c25000 0x1000>; status = "disabled"; }; frame@17c27000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c27000 0 0x1000>; + reg = <0x17c27000 0x1000>; status = "disabled"; }; frame@17c29000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c29000 0 0x1000>; + reg = <0x17c29000 0x1000>; status = "disabled"; }; frame@17c2b000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c2b000 0 0x1000>; + reg = <0x17c2b000 0x1000>; status = "disabled"; }; frame@17c2d000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17c2d000 0 0x1000>; + reg = <0x17c2d000 0x1000>; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts new file mode 100644 index 000000000000..45058ad0a1c8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -0,0 +1,427 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sc8280xp.dtsi" +#include "sc8280xp-pmics.dtsi" + +/ { + model = "Qualcomm SC8280XP CRD"; + compatible = "qcom,sc8280xp-crd", "qcom,sc8280xp"; + + aliases { + serial0 = &qup2_uart17; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pmc8280c_lpg 3 1000000>; + enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_bl>; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vreg_edp_bl: regulator-edp-bl { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_BL"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_reg_en>; + + regulator-boot-on; + }; + + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_MISC_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&misc_3p3_reg_en>; + + regulator-boot-on; + regulator-always-on; + }; +}; + +&apps_rsc { + pmc8280-1-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-l3-l5-supply = <&vreg_s11b>; + + vreg_s11b: smps11 { + regulator-name = "vreg_s11b"; + regulator-min-microvolt = <1272000>; + regulator-max-microvolt = <1272000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b: ldo3 { + regulator-name = "vreg_l3b"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-boot-on; + regulator-always-on; + }; + + vreg_l4b: ldo4 { + regulator-name = "vreg_l4b"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l6b: ldo6 { + regulator-name = "vreg_l6b"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-boot-on; + }; + }; + + pmc8280c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l13c: ldo13 { + regulator-name = "vreg_l13c"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; + + pmc8280-2-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-l4-supply = <&vreg_s11b>; + + vreg_l3d: ldo3 { + regulator-name = "vreg_l3d"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l4d: ldo4 { + regulator-name = "vreg_l4d"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l6d: ldo6 { + regulator-name = "vreg_l6d"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7d: ldo7 { + regulator-name = "vreg_l7d"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l9d: ldo9 { + regulator-name = "vreg_l9d"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; +}; + +&pmc8280c_lpg { + status = "okay"; +}; + +&pmk8280_pon_pwrkey { + status = "okay"; +}; + +&qup0 { + status = "okay"; +}; + +&qup0_i2c4 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&qup0_i2c4_default>, <&ts0_default>; + + status = "okay"; + + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + }; +}; + +&qup1 { + status = "okay"; +}; + +&qup2 { + status = "okay"; +}; + +&qup2_i2c5 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&qup2_i2c5_default>, <&kybd_default>, <&tpad_default>; + + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + }; + + keyboard@68 { + compatible = "hid-over-i2c"; + reg = <0x68>; + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + }; +}; + +&qup2_uart17 { + compatible = "qcom,geni-debug-uart"; + + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sc8280xp/qcadsp8280.mbn"; + + status = "okay"; +}; + +&remoteproc_nsp0 { + firmware-name = "qcom/sc8280xp/qccdsp8280.mbn"; + + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7c>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l3d>; + vccq-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l6b>; + vdda-pll-supply = <&vreg_l3b>; + + status = "okay"; +}; + +&usb_0 { + status = "okay"; +}; + +&usb_0_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "host"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l9d>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l7d>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l9d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l4b>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l13c>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l4b>; + vdda-pll-supply = <&vreg_l3b>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL - additions to nodes defined in sc8280xp.dtsi */ + +&pmc8280_1_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio8"; + function = "normal"; + }; + + edp_bl_reg_en: edp-bl-reg-en-state { + pins = "gpio9"; + function = "normal"; + }; + + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio1"; + function = "normal"; + }; +}; + +&pmc8280c_gpios { + edp_bl_pwm: edp-bl-pwm-state { + pins = "gpio8"; + function = "func1"; + }; +}; + +&tlmm { + gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; + + kybd_default: kybd-default-state { + disable { + pins = "gpio102"; + function = "gpio"; + output-low; + }; + + int-n { + pins = "gpio104"; + function = "gpio"; + bias-disable; + }; + + reset { + pins = "gpio105"; + function = "gpio"; + bias-disable; + }; + }; + + qup0_i2c4_default: qup0-i2c4-default-state { + pins = "gpio171", "gpio172"; + function = "qup4"; + + bias-disable; + drive-strength = <16>; + }; + + qup2_i2c5_default: qup2-i2c5-default-state { + pins = "gpio81", "gpio82"; + function = "qup21"; + + bias-disable; + drive-strength = <16>; + }; + + tpad_default: tpad-default-state { + int-n { + pins = "gpio182"; + function = "gpio"; + bias-disable; + }; + }; + + ts0_default: ts0-default-state { + int-n { + pins = "gpio175"; + function = "gpio"; + bias-pull-up; + }; + + reset-n { + pins = "gpio99"; + function = "gpio"; + output-high; + drive-strength = <16>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts new file mode 100644 index 000000000000..84dc92dda0b8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -0,0 +1,386 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sc8280xp.dtsi" +#include "sc8280xp-pmics.dtsi" + +/ { + model = "Lenovo ThinkPad X13s"; + compatible = "lenovo,thinkpad-x13s", "qcom,sc8280xp"; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pmc8280c_lpg 3 1000000>; + enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_bl>; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; + }; + + vreg_edp_bl: regulator-edp-bl { + compatible = "regulator-fixed"; + + regulator-name = "VBL9"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_reg_en>; + + regulator-boot-on; + }; + + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VCC3B"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&misc_3p3_reg_en>; + + regulator-boot-on; + regulator-always-on; + }; +}; + +&apps_rsc { + pmc8280-1-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-l3-l5-supply = <&vreg_s11b>; + + vreg_s11b: smps11 { + regulator-name = "vreg_s11b"; + regulator-min-microvolt = <1272000>; + regulator-max-microvolt = <1272000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b: ldo3 { + regulator-name = "vreg_l3b"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-boot-on; + }; + + vreg_l4b: ldo4 { + regulator-name = "vreg_l4b"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l6b: ldo6 { + regulator-name = "vreg_l6b"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-boot-on; + regulator-always-on; // FIXME: VDD_A_EDP_0_0P9 + }; + }; + + pmc8280c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l12c: ldo12 { + regulator-name = "vreg_l12c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l13c: ldo13 { + regulator-name = "vreg_l13c"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; + + pmc8280-2-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-l4-supply = <&vreg_s11b>; + + vreg_l3d: ldo3 { + regulator-name = "vreg_l3d"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l4d: ldo4 { + regulator-name = "vreg_l4d"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7d: ldo7 { + regulator-name = "vreg_l7d"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l9d: ldo9 { + regulator-name = "vreg_l9d"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; +}; + +&pmc8280c_lpg { + status = "okay"; +}; + +&pmk8280_pon_pwrkey { + status = "okay"; +}; + +&qup0 { + status = "okay"; +}; + +&qup0_i2c4 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&qup0_i2c4_default>, <&ts0_default>; + + status = "okay"; + + /* FIXME: verify */ + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + }; +}; + +&qup1 { + status = "okay"; +}; + +&qup2 { + status = "okay"; +}; + +&qup2_i2c5 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&qup2_i2c5_default>, <&kybd_default>, <&tpad_default>; + + status = "okay"; + + touchpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + }; + + keyboard@68 { + compatible = "hid-over-i2c"; + reg = <0x68>; + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + }; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sc8280xp/qcadsp8280.mbn"; + + status = "okay"; +}; + +&remoteproc_nsp0 { + firmware-name = "qcom/sc8280xp/qccdsp8280.mbn"; + + status = "okay"; +}; + +&usb_0 { + status = "okay"; +}; + +&usb_0_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "host"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l9d>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l7d>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l9d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l4b>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l13c>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l4b>; + vdda-pll-supply = <&vreg_l3b>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL */ + +&pmc8280_1_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio8"; + function = "normal"; + }; + + edp_bl_reg_en: edp-bl-reg-en-state { + pins = "gpio9"; + function = "normal"; + }; + + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio1"; + function = "normal"; + }; +}; + +&pmc8280c_gpios { + edp_bl_pwm: edp-bl-pwm-state { + pins = "gpio8"; + function = "func1"; + }; +}; + +&tlmm { + gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; + + kybd_default: kybd-default-state { + disable { + pins = "gpio102"; + function = "gpio"; + output-low; + }; + + int-n { + pins = "gpio104"; + function = "gpio"; + bias-disable; + }; + + reset { + pins = "gpio105"; + function = "gpio"; + bias-disable; + }; + }; + + qup0_i2c4_default: qup0-i2c4-default-state { + pins = "gpio171", "gpio172"; + function = "qup4"; + bias-disable; + drive-strength = <16>; + }; + + qup2_i2c5_default: qup2-i2c5-default-state { + pins = "gpio81", "gpio82"; + function = "qup21"; + bias-disable; + drive-strength = <16>; + }; + + tpad_default: tpad-default-state { + int-n { + pins = "gpio182"; + function = "gpio"; + bias-disable; + }; + }; + + ts0_default: ts0-default-state { + int-n { + pins = "gpio175"; + function = "gpio"; + bias-pull-up; + }; + + reset-n { + pins = "gpio99"; + function = "gpio"; + output-high; + drive-strength = <16>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi new file mode 100644 index 000000000000..ae90b97aecb8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmk8280: pmic@0 { + compatible = "qcom,pmk8350", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmk8280_pon: pon@1300 { + compatible = "qcom,pm8998-pon"; + reg = <0x1300>; + + pmk8280_pon_pwrkey: pwrkey { + compatible = "qcom,pmk8350-pwrkey"; + interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_POWER>; + status = "disabled"; + }; + }; + }; + + pmc8280_1: pmic@1 { + compatible = "qcom,pm8350", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8280_1_gpios: gpio@8800 { + compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8280_1_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmc8280c: pmic@2 { + compatible = "qcom,pm8350c", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8280c_gpios: gpio@8800 { + compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8280c_gpios 0 0 9>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pmc8280c_lpg: lpg@e800 { + compatible = "qcom,pm8350c-pwm"; + reg = <0xe800>; + + #address-cells = <1>; + #size-cells = <0>; + + #pwm-cells = <2>; + + status = "disabled"; + }; + }; + + pmc8280_2: pmic@3 { + compatible = "qcom,pm8350", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8280_2_gpios: gpio@8800 { + compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8280_2_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmr735a: pmic@4 { + compatible = "qcom,pmr735a", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmr735a_gpios: gpio@8800 { + compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmr735a_gpios 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi new file mode 100644 index 000000000000..49ea8b5612fc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -0,0 +1,2147 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/clock/qcom,gcc-sc8280xp.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interconnect/qcom,sc8280xp.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + }; + }; + + cpu0_opp_table: cpu0-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + }; + opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + }; + opp-499200000 { + opp-hz = /bits/ 64 <499200000>; + }; + opp-595200000 { + opp-hz = /bits/ 64 <595200000>; + }; + opp-691200000 { + opp-hz = /bits/ 64 <691200000>; + }; + opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + }; + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + }; + opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + }; + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + }; + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + }; + opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + }; + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000>; + }; + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + }; + opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + }; + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + }; + opp-1881600000 { + opp-hz = /bits/ 64 <1881600000>; + }; + opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + }; + opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + }; + opp-2227200000 { + opp-hz = /bits/ 64 <2227200000>; + }; + opp-2342400000 { + opp-hz = /bits/ 64 <2342400000>; + }; + opp-2438400000 { + opp-hz = /bits/ 64 <2438400000>; + }; + }; + + cpu4_opp_table: cpu4-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + }; + opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + }; + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + }; + opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + }; + opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + }; + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + }; + opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + }; + opp-1747200000 { + opp-hz = /bits/ 64 <1747200000>; + }; + opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + }; + opp-1977600000 { + opp-hz = /bits/ 64 <1977600000>; + }; + opp-2073600000 { + opp-hz = /bits/ 64 <2073600000>; + }; + opp-2169600000 { + opp-hz = /bits/ 64 <2169600000>; + }; + opp-2284800000 { + opp-hz = /bits/ 64 <2284800000>; + }; + opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + }; + opp-2496000000 { + opp-hz = /bits/ 64 <2496000000>; + }; + opp-2592000000 { + opp-hz = /bits/ 64 <2592000000>; + }; + opp-2688000000 { + opp-hz = /bits/ 64 <2688000000>; + }; + opp-2803200000 { + opp-hz = /bits/ 64 <2803200000>; + }; + opp-2899200000 { + opp-hz = /bits/ 64 <2899200000>; + }; + opp-2995200000 { + opp-hz = /bits/ 64 <2995200000>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_100>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x200>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_200>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x300>; + enable-method = "psci"; + capacity-dmips-mhz = <602>; + next-level-cache = <&L2_300>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x400>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_400>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x500>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_500>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x600>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_600>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x700>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_700>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <355>; + exit-latency-us = <909>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <241>; + exit-latency-us = <1461>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sc8280xp", "qcom,scm"; + }; + }; + + aggre1_noc: interconnect-aggre1-noc { + compatible = "qcom,sc8280xp-aggre1-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect-aggre2-noc { + compatible = "qcom,sc8280xp-aggre2-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + clk_virt: interconnect-clk-virt { + compatible = "qcom,sc8280xp-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + config_noc: interconnect-config-noc { + compatible = "qcom,sc8280xp-config-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + dc_noc: interconnect-dc-noc { + compatible = "qcom,sc8280xp-dc-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect-gem-noc { + compatible = "qcom,sc8280xp-gem-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_noc: interconnect-lpass-ag-noc { + compatible = "qcom,sc8280xp-lpass-ag-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-mc-virt { + compatible = "qcom,sc8280xp-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect-mmss-noc { + compatible = "qcom,sc8280xp-mmss-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + nspa_noc: interconnect-nspa-noc { + compatible = "qcom,sc8280xp-nspa-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + nspb_noc: interconnect-nspb-noc { + compatible = "qcom,sc8280xp-nspb-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect-system-noc { + compatible = "qcom,sc8280xp-system-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; + }; + + qup_opp_table_100mhz: qup-100mhz-opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + reserved-region@80000000 { + reg = <0 0x80000000 0 0x860000>; + no-map; + }; + + cmd_db: cmd-db-region@80860000 { + compatible = "qcom,cmd-db"; + reg = <0 0x80860000 0 0x20000>; + no-map; + }; + + reserved-region@80880000 { + reg = <0 0x80880000 0 0x80000>; + no-map; + }; + + smem_mem: smem-region@80900000 { + compatible = "qcom,smem"; + reg = <0 0x80900000 0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + reserved-region@80b00000 { + reg = <0 0x80b00000 0 0x100000>; + no-map; + }; + + reserved-region@83b00000 { + reg = <0 0x83b00000 0 0x1700000>; + no-map; + }; + + reserved-region@85b00000 { + reg = <0 0x85b00000 0 0xc00000>; + no-map; + }; + + pil_adsp_mem: adsp-region@86c00000 { + reg = <0 0x86c00000 0 0x2000000>; + no-map; + }; + + pil_nsp0_mem: cdsp0-region@8a100000 { + reg = <0 0x8a100000 0 0x1e00000>; + no-map; + }; + + pil_nsp1_mem: cdsp1-region@8c600000 { + reg = <0 0x8c600000 0 0x1e00000>; + no-map; + }; + + reserved-region@aeb00000 { + reg = <0 0xaeb00000 0 0x16600000>; + no-map; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-nsp0 { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_nsp0_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_nsp0_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-nsp1 { + compatible = "qcom,smp2p"; + qcom,smem = <617>, <616>; + interrupts-extended = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <12>; + + smp2p_nsp1_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_nsp1_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sc8280xp"; + reg = <0x0 0x00100000 0x0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&usb_0_ssphy>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&usb_1_ssphy>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + power-domains = <&rpmhpd SC8280XP_CX>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sc8280xp-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + qup2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0xa3 0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + qup2_uart17: serial@884000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00884000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + operating-points-v2 = <&qup_opp_table_100mhz>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + qup2_i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>, + <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + }; + + qup0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x009c0000 0 0x6000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0x563 0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + qup0_i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + status = "disabled"; + }; + }; + + qup1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x6000>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0x83 0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + }; + + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0xe0 0x0>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sc8280xp-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0xe10>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x108>, + <0 0x01d87600 0 0x1e0>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x108>, + <0 0x01d87a00 0 0x1e0>; + #phy-cells = <0>; + }; + }; + + ufs_card_hc: ufs@1da4000 { + compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01da4000 0 0x3000>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_card_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_CARD_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_CARD_GDSC>; + + iommus = <&apps_smmu 0x4a0 0x0>; + + clocks = <&gcc GCC_UFS_CARD_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>, + <&gcc GCC_UFS_CARD_AHB_CLK>, + <&gcc GCC_UFS_CARD_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_CARD_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_CARD_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_CARD_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_card_phy: phy@1da7000 { + compatible = "qcom,sc8280xp-qmp-ufs-phy"; + reg = <0 0x01da7000 0 0xe10>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>, + <&gcc GCC_UFS_CARD_PHY_AUX_CLK>; + + resets = <&ufs_card_hc 0>; + reset-names = "ufsphy"; + + status = "disabled"; + + ufs_card_phy_lanes: phy@1da7400 { + reg = <0 0x01da7400 0 0x108>, + <0 0x01da7600 0 0x1e0>, + <0 0x01da7c00 0 0x1dc>, + <0 0x01da7800 0 0x108>, + <0 0x01da7a00 0 0x1e0>; + #phy-cells = <0>; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + usb_0_hsphy: phy@88e5000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e5000 0 0x400>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_hsphy0: phy@88e7000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e7000 0 0x400>; + clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_hsphy1: phy@88e8000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e8000 0 0x400>; + clocks = <&gcc GCC_USB2_HS1_CLKREF_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_hsphy2: phy@88e9000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e9000 0 0x400>; + clocks = <&gcc GCC_USB2_HS2_CLKREF_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_HS2_MP_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_hsphy3: phy@88ea000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088ea000 0 0x400>; + clocks = <&gcc GCC_USB2_HS3_CLKREF_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_HS3_MP_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_qmpphy0: phy-wrapper@88ef000 { + compatible = "qcom,sc8280xp-qmp-usb3-uni-phy"; + reg = <0 0x088ef000 0 0x1c8>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_MP0_CLKREF_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>; + reset-names = "phy", "common"; + + power-domains = <&gcc USB30_MP_GDSC>; + + status = "disabled"; + + usb_2_ssphy0: phy@88efe00 { + reg = <0 0x088efe00 0 0x160>, + <0 0x088f0000 0 0x1ec>, + <0 0x088ef200 0 0x1f0>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb2_phy0_pipe_clk"; + }; + }; + + usb_2_qmpphy1: phy-wrapper@88f1000 { + compatible = "qcom,sc8280xp-qmp-usb3-uni-phy"; + reg = <0 0x088f1000 0 0x1c8>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_MP1_CLKREF_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>; + reset-names = "phy", "common"; + + power-domains = <&gcc USB30_MP_GDSC>; + + status = "disabled"; + + usb_2_ssphy1: phy@88f1e00 { + reg = <0 0x088f1e00 0 0x160>, + <0 0x088f2000 0 0x1ec>, + <0 0x088f1200 0 0x1f0>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb2_phy1_pipe_clk"; + }; + }; + + remoteproc_adsp: remoteproc@3000000 { + compatible = "qcom,sc8280xp-adsp-pas"; + reg = <0 0x03000000 0 0x100>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8280XP_LCX>, + <&rpmhpd SC8280XP_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&pil_adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + }; + }; + + usb_0_qmpphy: phy-wrapper@88ec000 { + compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; + reg = <0 0x088ec000 0 0x1e4>, + <0 0x088eb000 0 0x40>, + <0 0x088ed000 0 0x1c8>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB4_EUD_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + status = "disabled"; + + usb_0_ssphy: usb3-phy@88eb400 { + reg = <0 0x088eb400 0 0x100>, + <0 0x088eb600 0 0x3ec>, + <0 0x088ec400 0 0x1f0>, + <0 0x088eba00 0 0x100>, + <0 0x088ebc00 0 0x3ec>, + <0 0x088ec700 0 0x64>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb0_phy_pipe_clk_src"; + }; + + usb_0_dpphy: dp-phy@88ed200 { + reg = <0 0x088ed200 0 0x200>, + <0 0x088ed400 0 0x200>, + <0 0x088eda00 0 0x200>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; + }; + + usb_1_hsphy: phy@8902000 { + compatible = "qcom,sc8280xp-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x08902000 0 0x400>; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + + status = "disabled"; + }; + + usb_1_qmpphy: phy-wrapper@8904000 { + compatible = "qcom,sc8280xp-qmp-usb43dp-phy"; + reg = <0 0x08904000 0 0x1e4>, + <0 0x08903000 0 0x40>, + <0 0x08905000 0 0x1c8>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB4_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB4_1_DP_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + status = "disabled"; + + usb_1_ssphy: usb3-phy@8903400 { + reg = <0 0x08903400 0 0x100>, + <0 0x08903c00 0 0x3ec>, + <0 0x08904400 0 0x1f0>, + <0 0x08903a00 0 0x100>, + <0 0x08903c00 0 0x3ec>, + <0 0x08904200 0 0x18>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb1_phy_pipe_clk_src"; + }; + + usb_1_dpphy: dp-phy@8904200 { + reg = <0 0x08904200 0 0x200>, + <0 0x08904400 0 0x200>, + <0 0x08904a00 0 0x200>, + <0 0x08904600 0 0x200>, + <0 0x08904800 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sc8280xp-llcc"; + reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; + }; + + usb_0: usb@a6f8800 { + compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", + "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + status = "disabled"; + + usb_0_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x820 0x0>; + phys = <&usb_0_hsphy>, <&usb_0_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_1: usb@a8f8800 { + compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", + "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 12 IRQ_TYPE_EDGE_BOTH>, + <&pdc 13 IRQ_TYPE_EDGE_BOTH>, + <&pdc 136 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + status = "disabled"; + + usb_1_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x860 0x0>; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sc8280xp-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; + qcom,pdc-ranges = <0 480 40>, + <40 140 14>, + <54 263 1>, + <55 306 4>, + <59 312 3>, + <62 374 2>, + <64 434 2>, + <66 438 3>, + <69 86 1>, + <70 520 54>, + <124 609 28>, + <159 638 1>, + <160 720 8>, + <168 801 1>, + <169 728 30>, + <199 416 2>, + <201 449 1>, + <202 89 1>, + <203 451 1>, + <204 462 1>, + <205 264 1>, + <206 579 1>, + <207 653 1>, + <208 656 1>, + <209 659 1>, + <210 122 1>, + <211 699 1>, + <212 705 1>, + <213 450 1>, + <214 643 1>, + <216 646 5>, + <221 390 5>, + <226 700 3>, + <229 240 3>, + <232 269 1>, + <233 377 1>, + <234 372 1>, + <235 138 1>, + <236 857 1>, + <237 860 1>, + <238 137 1>, + <239 668 1>, + <240 366 1>, + <241 949 1>, + <242 815 5>, + <247 769 1>, + <248 768 1>, + <249 663 1>, + <250 799 2>, + <252 798 1>, + <253 765 1>, + <254 763 1>, + <255 454 1>, + <258 139 1>, + <259 786 2>, + <261 370 2>, + <263 158 2>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x8>; /* SROT */ + #qcom,sensors = <14>; + interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x8>; /* SROT */ + #qcom,sensors = <16>; + interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sc8280xp-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c440000 0 0x1100>, + <0 0x0c600000 0 0x2000000>, + <0 0x0e600000 0 0x100000>, + <0 0x0e700000 0 0xa0000>, + <0 0x0c40a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sc8280xp-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 230>; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sc8280xp-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 890 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + #redistributor-regions = <1>; + redistributor-stride = <0 0x20000>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic-its@17a40000 { + compatible = "arm,gic-v3-its"; + reg = <0 0x17a40000 0 0x20000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sc8280xp", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x20000000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c23000 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c25000 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c26000 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c29000 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c2b000 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c2d000 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, + <WAKE_TCS 3>, <CONTROL_TCS 1>; + label = "apps_rsc"; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sc8280xp-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board_clk>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sc8280xp-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@18591000 { + compatible = "qcom,sc8280xp-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x18591000 0 0x1000>, + <0 0x18592000 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + + remoteproc_nsp0: remoteproc@1b300000 { + compatible = "qcom,sc8280xp-nsp0-pas"; + reg = <0 0x1b300000 0 0x100>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp0_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp0_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp0_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8280XP_NSP>; + power-domain-names = "nsp"; + + memory-region = <&pil_nsp0_mem>; + + qcom,smem-states = <&smp2p_nsp0_out 0>; + qcom,smem-state-names = "stop"; + + interconnects = <&nspa_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "nsp0"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x3181 0x0420>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x3182 0x0420>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x3183 0x0420>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x3184 0x0420>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x3185 0x0420>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x3186 0x0420>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x3187 0x0420>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x3188 0x0420>; + }; + + compute-cb@9 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <9>; + iommus = <&apps_smmu 0x318b 0x0420>; + }; + + compute-cb@10 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <10>; + iommus = <&apps_smmu 0x318b 0x0420>; + }; + + compute-cb@11 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <11>; + iommus = <&apps_smmu 0x318c 0x0420>; + }; + + compute-cb@12 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <12>; + iommus = <&apps_smmu 0x318d 0x0420>; + }; + + compute-cb@13 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <13>; + iommus = <&apps_smmu 0x318e 0x0420>; + }; + + compute-cb@14 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <14>; + iommus = <&apps_smmu 0x318f 0x0420>; + }; + }; + }; + }; + + remoteproc_nsp1: remoteproc@21300000 { + compatible = "qcom,sc8280xp-nsp1-pas"; + reg = <0 0x21300000 0 0x100>; + + interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp1_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp1_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_nsp1_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC8280XP_NSP>; + power-domain-names = "nsp"; + + memory-region = <&pil_nsp1_mem>; + + qcom,smem-states = <&smp2p_nsp1_out 0>; + qcom,smem-state-names = "stop"; + + interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0 &mc_virt SLAVE_EBI1 0>; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "nsp1"; + qcom,remote-pid = <12>; + }; + }; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 15>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts new file mode 100644 index 000000000000..28050bc5f081 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts @@ -0,0 +1,461 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Ltd. + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> + * Copyright (c) 2020, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + */ + +/dts-v1/; + +#include "sdm660.dtsi" +#include "pm660.dtsi" +#include "pm660l.dtsi" + +/ { + model = "Inforce 6560 Single Board Computer"; + compatible = "inforce,ifc6560", "qcom,sda660"; + chassis-type = "embedded"; /* SBC */ + + aliases { + serial0 = &blsp1_uart2; + serial1 = &blsp2_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + volup { + label = "Volume Up"; + gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + /* + * Until we hook up type-c detection, we + * have to stick with this. But it works. + */ + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7533_out>; + }; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + + regulator-always-on; + regulator-boot-on; + }; + + v3p3_bck_bst: v3p3-bck-bst-regulator { + compatible = "regulator-fixed"; + regulator-name = "v3p3_bck_bst"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&vph_pwr>; + }; + + v1p2_ldo: v1p2-ldo-regulator { + compatible = "regulator-fixed"; + regulator-name = "v1p2_ldo"; + + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + vin-supply = <&vph_pwr>; + }; + + v5p0_boost: v5p0-boost-regulator { + compatible = "regulator-fixed"; + regulator-name = "v5p0_boost"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&vph_pwr>; + }; +}; + +&adsp_pil { + firmware-name = "qcom/ifc6560/adsp.mbn"; +}; + +&blsp_i2c6 { + status = "okay"; + + adv7533: hdmi@39 { + compatible = "adi,adv7535"; + reg = <0x39>, <0x66>; + reg-names = "main", "edid"; + + interrupt-parent = <&pm660l_gpios>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + + clocks = <&rpmcc RPM_SMD_BB_CLK2>; + clock-names = "cec"; + /* + * Limit to 3 lanes to prevent the bridge from changing amount + * of lanes in the fly. MSM DSI host doesn't like that. + */ + adi,dsi-lanes = <3>; + avdd-supply = <&vreg_l13a_1p8>; + dvdd-supply = <&vreg_l13a_1p8>; + pvdd-supply = <&vreg_l13a_1p8>; + a2vdd-supply = <&vreg_l13a_1p8>; + v3p3-supply = <&v3p3_bck_bst>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adv7533_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + adv7533_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&blsp1_dma { + /* + * The board will lock up if we toggle the BLSP clock, unless the + * BAM DMA interconnects support is in place. + */ + /delete-property/ clocks; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_dma { + /* + * The board will lock up if we toggle the BLSP clock, unless the + * BAM DMA interconnects support is in place. + */ + /delete-property/ clocks; +}; + +&blsp2_uart1 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_l13a_1p8>; + vddxo-supply = <&vreg_l9a_1p8>; + vddrf-supply = <&vreg_l6a_1p3>; + vddch0-supply = <&vreg_l19a_3p3>; + max-speed = <3200000>; + }; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vreg_l1a_1p225>; +}; + +&dsi0_out { + remote-endpoint = <&adv7533_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + vcca-supply = <&vreg_l1b_0p925>; +}; + +&mdss { + status = "okay"; +}; + +&mmss_smmu { + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = <KEY_VOLUMEUP>; +}; + +&qusb2phy0 { + status = "okay"; + + vdd-supply = <&vreg_l1b_0p925>; + vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; +}; + +&qusb2phy1 { + status = "okay"; + + vdd-supply = <&vreg_l1b_0p925>; + vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; +}; + +&rpm_requests { + pm660-regulators { + compatible = "qcom,rpm-pm660-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + + vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>; + vdd_l2_l3-supply = <&vreg_s2b_1p05>; + vdd_l5-supply = <&vreg_s2b_1p05>; + vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>; + vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>; + + vreg_s4a_2p04: s4 { + regulator-min-microvolt = <1805000>; + regulator-max-microvolt = <2040000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + regulator-always-on; + }; + + vreg_s5a_1p35: s5 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1350000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + }; + + vreg_l1a_1p225: l1 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1250000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l6a_1p3: l6 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1368000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l8a_1p8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-system-load = <325000>; + regulator-allow-set-load; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1804000>; + regulator-max-microvolt = <1896000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l13a_1p8: l13 { + /* This gives power to the LPDDR4: never turn it off! */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1944000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + vreg_l19a_3p3: l19 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3400000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + }; + + pm660l-regulators { + compatible = "qcom,rpm-pm660l-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + + vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>; + vdd_l2-supply = <&vreg_bob>; + vdd_l3_l5_l7_l8-supply = <&vreg_bob>; + vdd_l4_l6-supply = <&vreg_bob>; + vdd_bob-supply = <&vph_pwr>; + + vreg_s2b_1p05: s2 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + }; + + vreg_l1b_0p925: l1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <925000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l2b_2p95: l2 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l4b_2p95: l4 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2952000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + + regulator-min-microamp = <200>; + regulator-max-microamp = <600000>; + regulator-system-load = <570000>; + regulator-allow-set-load; + }; + + /* + * Downstream specifies a range of 1721-3600mV, + * but the only assigned consumers are SDHCI2 VMMC + * and Coresight QPDI that both request pinned 2.95V. + * Tighten the range to 1.8-3.328 (closest to 3.3) to + * make the mmc driver happy. + */ + vreg_l5b_2p95: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3328000>; + regulator-enable-ramp-delay = <250>; + regulator-system-load = <800000>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l7b_3p125: l7 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3125000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l8b_3p3: l8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3400000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3624000>; + regulator-enable-ramp-delay = <500>; + regulator-ramp-delay = <0>; + }; + }; +}; + +&sdc2_state_on { + sd-cd { + pins = "gpio54"; + bias-pull-up; + drive-strength = <2>; + }; +}; + +&sdc2_state_off { + sd-cd { + pins = "gpio54"; + bias-disable; + drive-strength = <2>; + }; +}; + +&sdhc_1 { + status = "okay"; + supports-cqe; + + vmmc-supply = <&vreg_l4b_2p95>; + vqmmc-supply = <&vreg_l8a_1p8>; + + mmc-ddr-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&vreg_l5b_2p95>; + vqmmc-supply = <&vreg_l2b_2p95>; + + cd-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; + no-sdio; + no-emmc; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <8 4>; +}; + +&usb2 { + status = "okay"; +}; + +&usb2_dwc3 { + dr_mode = "host"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; + extcon = <&extcon_usb>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index 42af1fade461..09c07800793a 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/leds/common.h> / { /* required for bootloader to select correct board */ @@ -34,7 +35,7 @@ height = <1920>; stride = <(1080 * 4)>; format = "a8r8g8b8"; - status= "okay"; + status = "okay"; }; }; @@ -87,13 +88,10 @@ pinctrl-0 = <&imx300_vana_default>; }; - gpio_keys { - status = "okay"; + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - camera_focus { + key-camera-focus { label = "Camera Focus"; gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -101,7 +99,7 @@ debounce-interval = <15>; }; - camera_snapshot { + key-camera-snapshot { label = "Camera Snapshot"; gpios = <&tlmm 113 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -109,7 +107,7 @@ debounce-interval = <15>; }; - vol_down { + key-vol-down { label = "Volume Down"; gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -214,6 +212,35 @@ /* HCI Bluetooth */ }; +&pm660l_lpg { + qcom,power-source = <1>; + + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_RED>; + }; + }; +}; + &pon_pwrkey { status = "okay"; }; @@ -224,7 +251,7 @@ linux,code = <KEY_VOLUMEUP>; }; -&qusb2phy { +&qusb2phy0 { status = "okay"; vdd-supply = <&vreg_l1b_0p925>; @@ -549,6 +576,22 @@ }; }; +&sdc2_state_on { + sd-cd { + pins = "gpio54"; + bias-pull-up; + drive-strength = <2>; + }; +}; + +&sdc2_state_off { + sd-cd { + pins = "gpio54"; + bias-disable; + drive-strength = <2>; + }; +}; + &sdhc_1 { status = "okay"; supports-cqe; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index b72e8e6c52f3..1bc9091cad2a 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,gpucc-sdm660.h> #include <dt-bindings/clock/qcom,mmcc-sdm660.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/interconnect/qcom,sdm660.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -552,19 +553,19 @@ }; qfprom: qfprom@780000 { - compatible = "qcom,qfprom"; + compatible = "qcom,sdm630-qfprom", "qcom,qfprom"; reg = <0x00780000 0x621c>; #address-cells = <1>; #size-cells = <1>; qusb2_hstx_trim: hstx-trim@240 { - reg = <0x240 0x1>; - bits = <25 3>; + reg = <0x243 0x1>; + bits = <1 3>; }; gpu_speed_bin: gpu-speed-bin@41a0 { - reg = <0x41a0 0x1>; - bits = <21 7>; + reg = <0x41a2 0x1>; + bits = <5 7>; }; }; @@ -982,12 +983,6 @@ bias-pull-up; drive-strength = <10>; }; - - sd-cd { - pins = "gpio54"; - bias-pull-up; - drive-strength = <2>; - }; }; sdc2_state_off: sdc2-off { @@ -1008,12 +1003,6 @@ bias-pull-up; drive-strength = <2>; }; - - sd-cd { - pins = "gpio54"; - bias-disable; - drive-strength = <2>; - }; }; }; @@ -1045,13 +1034,15 @@ nvmem-cells = <&gpu_speed_bin>; nvmem-cell-names = "speed_bin"; - interconnects = <&gnoc 1 &bimc 5>; + interconnects = <&bimc MASTER_OXILI &bimc SLAVE_EBI>; interconnect-names = "gfx-mem"; operating-points-v2 = <&gpu_sdm630_opp_table>; + status = "disabled"; + gpu_sdm630_opp_table: opp-table { - compatible = "operating-points-v2"; + compatible = "operating-points-v2"; opp-775000000 { opp-hz = /bits/ 64 <775000000>; opp-level = <RPM_SMD_LEVEL_TURBO>; @@ -1252,19 +1243,19 @@ * haven't seen any devices making use of it. */ maximum-speed = "high-speed"; - phys = <&qusb2phy>; + phys = <&qusb2phy0>; phy-names = "usb2-phy"; snps,hird-threshold = /bits/ 8 <0>; }; }; - qusb2phy: phy@c012000 { + qusb2phy0: phy@c012000 { compatible = "qcom,sdm660-qusb2-phy"; reg = <0x0c012000 0x180>; #phy-cells = <0>; clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_RX1_USB2_CLKREF_CLK>; + <&gcc GCC_RX0_USB2_CLKREF_CLK>; clock-names = "cfg_ahb", "ref"; resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; @@ -1272,7 +1263,21 @@ status = "disabled"; }; - sdhc_2: sdhci@c084000 { + qusb2phy1: phy@c014000 { + compatible = "qcom,sdm660-qusb2-phy"; + reg = <0x0c014000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX1_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + status = "disabled"; + }; + + sdhc_2: mmc@c084000 { compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5"; reg = <0x0c084000 0x1000>; reg-names = "hc"; @@ -1282,13 +1287,16 @@ interrupt-names = "hc_irq", "pwr_irq"; bus-width = <4>; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; - clock-names = "core", "iface", "xo"; + clock-names = "iface", "core", "xo"; + interconnects = <&a2noc 3 &a2noc 10>, <&gnoc 0 &cnoc 28>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; operating-points-v2 = <&sdhc2_opp_table>; pinctrl-names = "default", "sleep"; @@ -1322,7 +1330,7 @@ }; }; - sdhc_1: sdhci@c0c4000 { + sdhc_1: mmc@c0c4000 { compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5"; reg = <0x0c0c4000 0x1000>, <0x0c0c5000 0x1000>, @@ -1333,15 +1341,15 @@ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>, <&gcc GCC_SDCC1_ICE_CORE_CLK>; - clock-names = "core", "iface", "xo", "ice"; + clock-names = "iface", "core", "xo", "ice"; interconnects = <&a2noc 2 &a2noc 10>, <&gnoc 0 &cnoc 27>; - interconnect-names = "sdhc1-ddr", "cpu-sdhc1"; + interconnect-names = "sdhc-ddr", "cpu-sdhc"; operating-points-v2 = <&sdhc1_opp_table>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc1_state_on>; @@ -1377,6 +1385,47 @@ }; }; + usb2: usb@c2f8800 { + compatible = "qcom,sdm660-dwc3", "qcom,dwc3"; + reg = <0x0c2f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB2_AXI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_SLEEP_CLK>; + clock-names = "cfg_noc", "core", + "mock_utmi", "sleep"; + + assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>; + assigned-clock-rates = <19200000>, <60000000>; + + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq"; + + qcom,select-utmi-as-pipe-clk; + + resets = <&gcc GCC_USB_20_BCR>; + + usb2_dwc3: usb@c200000 { + compatible = "snps,dwc3"; + reg = <0x0c200000 0xc8d0>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + + /* This is the HS-only host */ + maximum-speed = "high-speed"; + phys = <&qusb2phy1>; + phy-names = "usb2-phy"; + snps,hird-threshold = /bits/ 8 <0>; + }; + }; + mmcc: clock-controller@c8c0000 { compatible = "qcom,mmcc-sdm630"; reg = <0x0c8c0000 0x40000>; @@ -1405,7 +1454,7 @@ <0>; }; - dsi_opp_table: dsi-opp-table { + dsi_opp_table: opp-table-dsi { compatible = "operating-points-v2"; opp-131250000 { @@ -1494,7 +1543,7 @@ }; }; - mdp_opp_table: mdp-opp { + mdp_opp_table: opp-table { compatible = "operating-points-v2"; opp-150000000 { @@ -1563,6 +1612,8 @@ phys = <&dsi0_phy>; phy-names = "dsi"; + status = "disabled"; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1596,6 +1647,7 @@ clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; clock-names = "iface", "ref"; + status = "disabled"; }; }; @@ -1829,8 +1881,8 @@ status = "disabled"; }; - imem@146bf000 { - compatible = "simple-mfd"; + sram@146bf000 { + compatible = "qcom,sdm630-imem", "syscon", "simple-mfd"; reg = <0x146bf000 0x1000>; #address-cells = <1>; @@ -1846,138 +1898,138 @@ camss: camss@ca00000 { compatible = "qcom,sdm660-camss"; - reg = <0x0c824000 0x1000>, + reg = <0x0ca00020 0x10>, + <0x0ca30000 0x100>, + <0x0ca30400 0x100>, + <0x0ca30800 0x100>, + <0x0ca30c00 0x100>, + <0x0c824000 0x1000>, <0x0ca00120 0x4>, <0x0c825000 0x1000>, <0x0ca00124 0x4>, <0x0c826000 0x1000>, <0x0ca00128 0x4>, - <0x0ca30000 0x100>, - <0x0ca30400 0x100>, - <0x0ca30800 0x100>, - <0x0ca30c00 0x100>, <0x0ca31000 0x500>, - <0x0ca00020 0x10>, <0x0ca10000 0x1000>, <0x0ca14000 0x1000>; - reg-names = "csiphy0", + reg-names = "csi_clk_mux", + "csid0", + "csid1", + "csid2", + "csid3", + "csiphy0", "csiphy0_clk_mux", "csiphy1", "csiphy1_clk_mux", "csiphy2", "csiphy2_clk_mux", - "csid0", - "csid1", - "csid2", - "csid3", "ispif", - "csi_clk_mux", "vfe0", "vfe1"; - interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>, + interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "csiphy0", - "csiphy1", - "csiphy2", - "csid0", + interrupt-names = "csid0", "csid1", "csid2", "csid3", + "csiphy0", + "csiphy1", + "csiphy2", "ispif", "vfe0", "vfe1"; - clocks = <&mmcc CAMSS_TOP_AHB_CLK>, - <&mmcc THROTTLE_CAMSS_AXI_CLK>, - <&mmcc CAMSS_ISPIF_AHB_CLK>, - <&mmcc CAMSS_CSI0PHYTIMER_CLK>, - <&mmcc CAMSS_CSI1PHYTIMER_CLK>, - <&mmcc CAMSS_CSI2PHYTIMER_CLK>, - <&mmcc CAMSS_CSI0_AHB_CLK>, - <&mmcc CAMSS_CSI0_CLK>, - <&mmcc CAMSS_CPHY_CSID0_CLK>, - <&mmcc CAMSS_CSI0PIX_CLK>, - <&mmcc CAMSS_CSI0RDI_CLK>, - <&mmcc CAMSS_CSI1_AHB_CLK>, - <&mmcc CAMSS_CSI1_CLK>, - <&mmcc CAMSS_CPHY_CSID1_CLK>, - <&mmcc CAMSS_CSI1PIX_CLK>, - <&mmcc CAMSS_CSI1RDI_CLK>, - <&mmcc CAMSS_CSI2_AHB_CLK>, - <&mmcc CAMSS_CSI2_CLK>, - <&mmcc CAMSS_CPHY_CSID2_CLK>, - <&mmcc CAMSS_CSI2PIX_CLK>, - <&mmcc CAMSS_CSI2RDI_CLK>, - <&mmcc CAMSS_CSI3_AHB_CLK>, - <&mmcc CAMSS_CSI3_CLK>, - <&mmcc CAMSS_CPHY_CSID3_CLK>, - <&mmcc CAMSS_CSI3PIX_CLK>, - <&mmcc CAMSS_CSI3RDI_CLK>, - <&mmcc CAMSS_AHB_CLK>, - <&mmcc CAMSS_VFE0_CLK>, - <&mmcc CAMSS_CSI_VFE0_CLK>, - <&mmcc CAMSS_VFE0_AHB_CLK>, - <&mmcc CAMSS_VFE0_STREAM_CLK>, - <&mmcc CAMSS_VFE1_CLK>, - <&mmcc CAMSS_CSI_VFE1_CLK>, - <&mmcc CAMSS_VFE1_AHB_CLK>, - <&mmcc CAMSS_VFE1_STREAM_CLK>, - <&mmcc CAMSS_VFE_VBIF_AHB_CLK>, - <&mmcc CAMSS_VFE_VBIF_AXI_CLK>, - <&mmcc CSIPHY_AHB2CRIF_CLK>, - <&mmcc CAMSS_CPHY_CSID0_CLK>, - <&mmcc CAMSS_CPHY_CSID1_CLK>, - <&mmcc CAMSS_CPHY_CSID2_CLK>, - <&mmcc CAMSS_CPHY_CSID3_CLK>; - clock-names = "top_ahb", - "throttle_axi", - "ispif_ahb", - "csiphy0_timer", - "csiphy1_timer", - "csiphy2_timer", - "csi0_ahb", - "csi0", - "csi0_phy", - "csi0_pix", - "csi0_rdi", - "csi1_ahb", - "csi1", - "csi1_phy", - "csi1_pix", - "csi1_rdi", - "csi2_ahb", - "csi2", - "csi2_phy", - "csi2_pix", - "csi2_rdi", - "csi3_ahb", - "csi3", - "csi3_phy", - "csi3_pix", - "csi3_rdi", - "ahb", - "vfe0", - "csi_vfe0", - "vfe0_ahb", - "vfe0_stream", - "vfe1", - "csi_vfe1", - "vfe1_ahb", - "vfe1_stream", - "vfe_ahb", - "vfe_axi", - "csiphy_ahb2crif", - "cphy_csid0", - "cphy_csid1", - "cphy_csid2", - "cphy_csid3"; + clocks = <&mmcc CAMSS_AHB_CLK>, + <&mmcc CAMSS_CPHY_CSID0_CLK>, + <&mmcc CAMSS_CPHY_CSID1_CLK>, + <&mmcc CAMSS_CPHY_CSID2_CLK>, + <&mmcc CAMSS_CPHY_CSID3_CLK>, + <&mmcc CAMSS_CSI0_AHB_CLK>, + <&mmcc CAMSS_CSI0_CLK>, + <&mmcc CAMSS_CPHY_CSID0_CLK>, + <&mmcc CAMSS_CSI0PIX_CLK>, + <&mmcc CAMSS_CSI0RDI_CLK>, + <&mmcc CAMSS_CSI1_AHB_CLK>, + <&mmcc CAMSS_CSI1_CLK>, + <&mmcc CAMSS_CPHY_CSID1_CLK>, + <&mmcc CAMSS_CSI1PIX_CLK>, + <&mmcc CAMSS_CSI1RDI_CLK>, + <&mmcc CAMSS_CSI2_AHB_CLK>, + <&mmcc CAMSS_CSI2_CLK>, + <&mmcc CAMSS_CPHY_CSID2_CLK>, + <&mmcc CAMSS_CSI2PIX_CLK>, + <&mmcc CAMSS_CSI2RDI_CLK>, + <&mmcc CAMSS_CSI3_AHB_CLK>, + <&mmcc CAMSS_CSI3_CLK>, + <&mmcc CAMSS_CPHY_CSID3_CLK>, + <&mmcc CAMSS_CSI3PIX_CLK>, + <&mmcc CAMSS_CSI3RDI_CLK>, + <&mmcc CAMSS_CSI0PHYTIMER_CLK>, + <&mmcc CAMSS_CSI1PHYTIMER_CLK>, + <&mmcc CAMSS_CSI2PHYTIMER_CLK>, + <&mmcc CSIPHY_AHB2CRIF_CLK>, + <&mmcc CAMSS_CSI_VFE0_CLK>, + <&mmcc CAMSS_CSI_VFE1_CLK>, + <&mmcc CAMSS_ISPIF_AHB_CLK>, + <&mmcc THROTTLE_CAMSS_AXI_CLK>, + <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_VFE0_AHB_CLK>, + <&mmcc CAMSS_VFE0_CLK>, + <&mmcc CAMSS_VFE0_STREAM_CLK>, + <&mmcc CAMSS_VFE1_AHB_CLK>, + <&mmcc CAMSS_VFE1_CLK>, + <&mmcc CAMSS_VFE1_STREAM_CLK>, + <&mmcc CAMSS_VFE_VBIF_AHB_CLK>, + <&mmcc CAMSS_VFE_VBIF_AXI_CLK>; + clock-names = "ahb", + "cphy_csid0", + "cphy_csid1", + "cphy_csid2", + "cphy_csid3", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "csi2_ahb", + "csi2", + "csi2_phy", + "csi2_pix", + "csi2_rdi", + "csi3_ahb", + "csi3", + "csi3_phy", + "csi3_pix", + "csi3_rdi", + "csiphy0_timer", + "csiphy1_timer", + "csiphy2_timer", + "csiphy_ahb2crif", + "csi_vfe0", + "csi_vfe1", + "ispif_ahb", + "throttle_axi", + "top_ahb", + "vfe0_ahb", + "vfe0", + "vfe0_stream", + "vfe1_ahb", + "vfe1", + "vfe1_stream", + "vfe_ahb", + "vfe_axi"; interconnects = <&mnoc 5 &bimc 5>; interconnect-names = "vfe-mem"; iommus = <&mmss_smmu 0xc00>, @@ -2158,8 +2210,6 @@ label = "lpass"; mboxes = <&apcs_glb 9>; qcom,remote-pid = <2>; - #address-cells = <1>; - #size-cells = <0>; apr { compatible = "qcom,apr-v2"; diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts index 8b815b2a60a7..891e314bc782 100644 --- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts +++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts @@ -27,7 +27,7 @@ gpio-keys { compatible = "gpio-keys"; - volume-up { + key-volume-up { label = "volume_up"; linux,code = <KEY_VOLUMEUP>; gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts index b96da53f2f1e..58f687fc49e0 100644 --- a/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts +++ b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts @@ -19,7 +19,7 @@ }; &sdc2_state_on { - pinconf-clk { + clk { drive-strength = <14>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts index dcbaacf18f66..a3559f6e34a5 100644 --- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts +++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts @@ -51,7 +51,7 @@ gpio-keys { compatible = "gpio-keys"; - volup { + key-volup { label = "Volume Up"; gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; @@ -103,7 +103,7 @@ linux,code = <KEY_VOLUMEDOWN>; }; -&qusb2phy { +&qusb2phy0 { status = "okay"; vdd-supply = <&vreg_l1b_0p925>; @@ -363,6 +363,30 @@ }; }; +&pm660l_wled { + status = "okay"; + + qcom,switching-freq = <800>; + qcom,current-limit-microamp = <20000>; + qcom,num-strings = <2>; +}; + +&sdc2_state_on { + sd-cd { + pins = "gpio54"; + bias-pull-up; + drive-strength = <2>; + }; +}; + +&sdc2_state_off { + sd-cd { + pins = "gpio54"; + bias-disable; + drive-strength = <2>; + }; +}; + &sdhc_1 { status = "okay"; supports-cqe; diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi index 1d748c5305f4..43220af1b685 100644 --- a/arch/arm64/boot/dts/qcom/sdm660.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi @@ -14,7 +14,7 @@ operating-points-v2 = <&gpu_sdm660_opp_table>; gpu_sdm660_opp_table: opp-table { - compatible = "operating-points-v2"; + compatible = "operating-points-v2"; /* * 775MHz is only available on the highest speed bin @@ -192,6 +192,8 @@ phys = <&dsi1_phy>; phy-names = "dsi"; + status = "disabled"; + ports { #address-cells = <1>; #size-cells = <0>; @@ -225,6 +227,7 @@ clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "ref"; + status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index e7e4cc5936aa..b5eb8f7eca1d 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -119,7 +119,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pen_eject_odl>; - pen-insert { + switch-pen-insert { label = "Pen Insert"; /* Insert = low, eject = high */ gpios = <&tlmm 119 GPIO_ACTIVE_LOW>; @@ -130,7 +130,7 @@ }; panel: panel { - compatible ="innolux,p120zdg-bf1"; + compatible = "innolux,p120zdg-bf1"; power-supply = <&pp3300_dx_edp>; backlight = <&backlight>; no-hpd; @@ -145,6 +145,138 @@ }; }; +&psci { + /delete-node/ cpu0; + /delete-node/ cpu1; + /delete-node/ cpu2; + /delete-node/ cpu3; + /delete-node/ cpu4; + /delete-node/ cpu5; + /delete-node/ cpu6; + /delete-node/ cpu7; + /delete-node/ cpu-cluster0; +}; + +&cpus { + /delete-node/ domain-idle-states; +}; + +&cpu_idle_states { + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-power-down"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <350>; + exit-latency-us = <461>; + min-residency-us = <1890>; + local-timer-stop; + }; + + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-down"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <360>; + exit-latency-us = <531>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-power-down"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <264>; + exit-latency-us = <621>; + min-residency-us = <952>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-down"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <1061>; + min-residency-us = <4488>; + local-timer-stop; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "cluster-power-down"; + arm,psci-suspend-param = <0x400000F4>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + local-timer-stop; + }; +}; + +&CPU0 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&CPU1 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&CPU2 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&CPU3 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&CPU4 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&CPU5 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&CPU6 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + +&CPU7 { + /delete-property/ power-domains; + /delete-property/ power-domain-names; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; +}; + /* * Reserved memory changes * diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 194ebeb3259c..c6e2c571b452 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6afe.h> @@ -43,14 +44,14 @@ regulator-always-on; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; autorepeat; pinctrl-names = "default"; pinctrl-0 = <&vol_up_pin_a>; - vol-up { + key-vol-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; @@ -60,22 +61,28 @@ leds { compatible = "gpio-leds"; - user4 { + led-0 { label = "green:user4"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; linux,default-trigger = "panic-indicator"; default-state = "off"; }; - wlan { + led-1 { label = "yellow:wlan"; + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_YELLOW>; gpios = <&pm8998_gpio 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tx"; default-state = "off"; }; - bt { + led-2 { label = "blue:bt"; + function = LED_FUNCTION_BLUETOOTH; + color = <LED_COLOR_ID_BLUE>; gpios = <&pm8998_gpio 5 GPIO_ACTIVE_HIGH>; linux,default-trigger = "bluetooth-power"; default-state = "off"; @@ -436,6 +443,10 @@ status = "okay"; }; +&gpi_dma1 { + status = "okay"; +}; + &gpu { status = "okay"; zap-shader { @@ -488,12 +499,14 @@ &i2c11 { /* On Low speed expansion */ + clock-frequency = <100000>; label = "LS-I2C1"; status = "okay"; }; &i2c14 { /* On Low speed expansion */ + clock-frequency = <100000>; label = "LS-I2C0"; status = "okay"; }; @@ -569,7 +582,7 @@ "OPTION2", "PM845_SLB"; - cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en { + cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en-state { pins = "gpio12"; function = "normal"; @@ -578,7 +591,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; }; - cam0_avdd_2v8_en_default: cam0-avdd-2v8-en { + cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state { pins = "gpio10"; function = "normal"; @@ -587,7 +600,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; }; - vol_up_pin_a: vol-up-active { + vol_up_pin_a: vol-up-active-state { pins = "gpio6"; function = "normal"; input-enable; @@ -606,10 +619,40 @@ }; }; +&pmi8998_lpg { + status = "okay"; + + qcom,power-source = <1>; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <3>; + + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + + led@4 { + reg = <4>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + }; + + led@5 { + reg = <5>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; +}; + /* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */ &q6afedai { qi2s@22 { - reg = <22>; + reg = <QUATERNARY_MI2S_RX>; qcom,sd-lines = <0 1 2 3>; }; }; @@ -718,7 +761,7 @@ }; codec { - sound-dai = <<9611_codec 0>; + sound-dai = <<9611_codec 0>; }; }; @@ -733,7 +776,7 @@ }; codec { - sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; + sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; }; }; @@ -1144,7 +1187,8 @@ }; &camss { - vdda-supply = <&vreg_l1a_0p875>; + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; status = "ok"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi new file mode 100644 index 000000000000..20f275f8694d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi @@ -0,0 +1,614 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 LG G7 / V35 (judyln / judyp) common device tree + * + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &gpu_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &mba_region; +/delete-node/ &mpss_region; +/delete-node/ &qseecom_mem; +/delete-node/ &rmtfs_mem; +/delete-node/ &slpi_mem; +/delete-node/ &spss_mem; +/delete-node/ &venus_mem; +/delete-node/ &wlan_msa_mem; + +/ { + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + qseecom_mem: memory@b2000000 { + reg = <0 0xb2000000 0 0x1800000>; + no-map; + }; + + gpu_mem: memory@8c415000 { + reg = <0 0x8c415000 0 0x2000>; + no-map; + }; + + ipa_fw_mem: memory@8c400000 { + reg = <0 0x8c400000 0 0x10000>; + no-map; + }; + + adsp_mem: memory@8c500000 { + reg = <0 0x8c500000 0 0x1e00000>; + no-map; + }; + + wlan_msa_mem: memory@8e300000 { + reg = <0 0x8e300000 0 0x100000>; + no-map; + }; + + mpss_region: memory@8e400000 { + reg = <0 0x8e400000 0 0x8900000>; + no-map; + }; + + venus_mem: memory@96d00000 { + reg = <0 0x96d00000 0 0x500000>; + no-map; + }; + + cdsp_mem: memory@97200000 { + reg = <0 0x97200000 0 0x800000>; + no-map; + }; + + mba_region: memory@97a00000 { + reg = <0 0x97a00000 0 0x200000>; + no-map; + }; + + slpi_mem: memory@97c00000 { + reg = <0 0x97c00000 0 0x1400000>; + no-map; + }; + + spss_mem: memory@99000000 { + reg = <0 0x99000000 0 0x100000>; + no-map; + }; + + /* Framebuffer region */ + memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2400000>; + no-map; + }; + + /* rmtfs lower guard */ + memory@f0800000 { + reg = <0 0xf0800000 0 0x1000>; + no-map; + }; + + rmtfs_mem: memory@f0801000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf0801000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + /* rmtfs upper guard */ + memory@f0a01000 { + reg = <0 0xf0a01000 0 0x1000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin_a>; + + label = "GPIO Buttons"; + + key-vol-up { + label = "Volume up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8998-smps4-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&adsp_pas { + status = "okay"; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p125: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p8: ldo9 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_1p0: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_2p7: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22a_2p85: ldo22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; + + pm8005-rpmh-regulators { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&cdsp_pas { + status = "okay"; +}; + +&dispcc { + status = "disabled"; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + }; +}; + +&ipa { + status = "okay"; + modem-init; +}; + +&mss_pil { + status = "okay"; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vddpx_2>; +}; + +/* + * UFS works partially and only with clk_ignore_unused. + * Sometimes it crashes with I/O errors. + */ +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* TODO: these devices have usb id pin */ + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&tlmm { + gpio-reserved-ranges = <28 4>, <81 4>; + + sdc2_clk: sdc2-clk { + pinconf { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + * + * TODO: copy-pasted from mtp, try other values + * on these devices. + */ + drive-strength = <16>; + }; + }; + + sdc2_cmd: sdc2-cmd { + pinconf { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sdc2_data: sdc2-data { + pinconf { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sd_card_det_n: sd-card-det-n { + pinmux { + pins = "gpio126"; + function = "gpio"; + }; + + pinconf { + pins = "gpio126"; + bias-pull-up; + }; + }; +}; + +&pm8998_gpio { + vol_up_pin_a: vol-up-active-pins { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts new file mode 100644 index 000000000000..7d967a104b3e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 LG G7 (judyln) device tree. + * + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sdm845-lg-common.dtsi" + +/ { + model = "LG G7 ThinQ"; + compatible = "lg,judyln", "qcom,sdm845"; + + chosen { + framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9d400000 0x0 (1440 * 3120 * 4)>; + width = <1440>; + height = <3120>; + stride = <(1440 * 4)>; + format = "a8r8g8b8"; + lab-supply = <&lab>; + ibb-supply = <&ibb>; + }; + }; + + /* Additional ThinQ key */ + gpio-keys { + pinctrl-0 = <&vol_up_pin_a &thinq_key_default>; + + key-thinq { + label = "ThinQ"; + linux,code = <KEY_ASSISTANT>; + interrupt-parent = <&tlmm>; + interrupts = <89 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&adsp_pas { + firmware-name = "qcom/sdm845/judyln/adsp.mbn"; +}; + +&cdsp_pas { + firmware-name = "qcom/sdm845/judyln/cdsp.mbn"; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/sdm845/judyln/a630_zap.mbn"; + }; +}; + +&mss_pil { + firmware-name = "qcom/sdm845/judyln/mba.mbn", "qcom/sdm845/judyln/modem.mbn"; +}; + +&tlmm { + thinq_key_default: thinq-key-default { + pins = "gpio89"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts new file mode 100644 index 000000000000..d17d4d4d5609 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 LG V35 (judyp) device tree. + * + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sdm845-lg-common.dtsi" + +/ { + model = "LG V35 ThinQ"; + compatible = "lg,judyp", "qcom,sdm845"; + + chosen { + framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9d400000 0x0 (1440 * 2880 * 4)>; + width = <1440>; + height = <2880>; + stride = <(1440 * 4)>; + format = "a8r8g8b8"; + }; + }; +}; + +&adsp_pas { + firmware-name = "qcom/sdm845/judyp/adsp.mbn"; +}; + +&cdsp_pas { + firmware-name = "qcom/sdm845/judyp/cdsp.mbn"; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/sdm845/judyp/a630_zap.mbn"; + }; +}; + +&mss_pil { + firmware-name = "qcom/sdm845/judyp/mba.mbn", "qcom/sdm845/judyp/modem.mbn"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 07b729f9fec5..392461c29e76 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -34,14 +34,14 @@ pinctrl-names = "default"; pinctrl-0 = <&volume_down_gpio &volume_up_gpio>; - vol-down { + key-vol-down { label = "Volume down"; linux,code = <KEY_VOLUMEDOWN>; gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; debounce-interval = <15>; }; - vol-up { + key-vol-up { label = "Volume up"; linux,code = <KEY_VOLUMEUP>; gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; @@ -440,7 +440,7 @@ }; &pm8998_gpio { - volume_down_gpio: pm8998_gpio5 { + volume_down_gpio: pm8998-gpio5-state { pinconf { pins = "gpio5"; function = "normal"; @@ -450,7 +450,7 @@ }; }; - volume_up_gpio: pm8998_gpio6 { + volume_up_gpio: pm8998-gpio6-state { pinconf { pins = "gpio6"; function = "normal"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index 103cc40816fd..83261c9bb4f2 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -2,11 +2,13 @@ /* * Copyright (c) 2022, Alexander Martinz <amartinz@shiftphones.com> * Copyright (c) 2022, Caleb Connolly <caleb@connolly.tech> + * Copyright (c) 2022, Dylan Van Assche <me@dylanvanassche.be> */ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sdm845.dtsi" #include "pm8998.dtsi" @@ -48,7 +50,7 @@ pinctrl-names = "default"; pinctrl-0 = <&volume_up_gpio>; - vol-up { + key-vol-up { label = "volume_up"; linux,code = <KEY_VOLUMEUP>; gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; @@ -468,7 +470,7 @@ }; &i2c5 { - status="okay"; + status = "okay"; touchscreen@38 { compatible = "focaltech,fts8719"; @@ -508,7 +510,7 @@ }; &pm8998_gpio { - volume_up_gpio: pm8998_gpio6 { + volume_up_gpio: pm8998-gpio6-state { pinconf { pins = "gpio6"; function = "normal"; @@ -529,6 +531,33 @@ }; }; +&pmi8998_lpg { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@4 { + reg = <4>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@5 { + reg = <5>; + color = <LED_COLOR_ID_RED>; + }; + }; +}; + &qup_uart9_default { pinconf-rx { pins = "gpio5"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts index 8a0d94e7f598..2f5e12deaada 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts @@ -19,8 +19,9 @@ }; &vreg_l22a_2p8 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; + /* Note: Round-down from 2700000 to be a multiple of PLDO step-size 8000 */ + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <2696000>; }; &vreg_l28a_2p8 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi index 281fe6dea62a..51ee42e3c995 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -19,7 +19,7 @@ /* Neither Camera Focus, nor Camera Shutter seem to work... */ - vol-down { + key-vol-down { label = "volume_down"; gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts index d88dc07205f7..82c27f90d300 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts @@ -45,7 +45,7 @@ pinctrl-names = "default"; pinctrl-0 = <&vol_up_pin_a>; - vol-up { + key-vol-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; @@ -306,7 +306,7 @@ }; &pm8998_gpio { - vol_up_pin_a: vol-up-active { + vol_up_pin_a: vol-up-active-state { pins = "gpio6"; function = "normal"; input-enable; @@ -339,7 +339,7 @@ /* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */ &q6afedai { qi2s@22 { - reg = <22>; + reg = <QUATERNARY_MI2S_RX>; qcom,sd-lines = <0>; }; }; @@ -419,7 +419,7 @@ }; codec { - sound-dai = <&wcd9340 0>; + sound-dai = <&wcd9340 0>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts new file mode 100644 index 000000000000..7747081b9887 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -0,0 +1,762 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Xilin Wu <strongtz@yeah.net> + * Copyright (c) 2022, Molly Sophia <mollysophia379@gmail.com> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" +#include "pm8005.dtsi" + +/* + * Delete following upstream (sdm845.dtsi) reserved + * memory mappings which are different in this device. + */ +/delete-node/ &rmtfs_mem; +/delete-node/ &adsp_mem; +/delete-node/ &wlan_msa_mem; +/delete-node/ &mpss_region; +/delete-node/ &venus_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &mba_region; +/delete-node/ &slpi_mem; +/delete-node/ &spss_mem; + +/ { + model = "Xiaomi Mi MIX 2S"; + compatible = "xiaomi,polaris", "qcom,sdm845"; + chassis-type = "handset"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <0x141 0x20001>; + qcom,board-id = <0x2a 0x0>; + + aliases { + serial0 = &uart9; + serial1 = &uart6; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&volume_up_gpio>; + + key-vol-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + }; + + reserved-memory { + adsp_mem: memory@8c500000 { + reg = <0 0x8c500000 0 0x1e00000>; + no-map; + }; + + wlan_msa_mem: memory@8e300000 { + reg = <0 0x8e300000 0 0x100000>; + no-map; + }; + + mpss_region: memory@8e400000 { + reg = <0 0x8e400000 0 0x7800000>; + no-map; + }; + + venus_mem: memory@95c00000 { + reg = <0 0x95c00000 0 0x500000>; + no-map; + }; + + cdsp_mem: memory@96100000 { + reg = <0 0x96100000 0 0x800000>; + no-map; + }; + + mba_region: memory@96900000 { + reg = <0 0x96900000 0 0x200000>; + no-map; + }; + + slpi_mem: memory@96b00000 { + reg = <0 0x96b00000 0 0x1400000>; + no-map; + }; + + spss_mem: memory@97f00000 { + reg = <0 0x97f00000 0 0x100000>; + no-map; + }; + + rmtfs_mem: memory@f6301000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf6301000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + }; + + battery: battery { + compatible = "simple-battery"; + + charge-full-design-microamp-hours = <3400000>; + voltage-min-design-microvolt = <3400000>; + voltage-max-design-microvolt = <4400000>; + }; + + vreg_tp_vddio: vreg-tp-vddio { + compatible = "regulator-fixed"; + regulator-name = "vreg_tp_vddio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 23 0>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + }; + + vreg_s4a_1p8: vreg-s4a-1p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s2a_1p1: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdda_mipi_dsi0_pll: + vdda_ufs1_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p8: ldo9 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_2p95: ldo10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_1p05: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l18a_2p9: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19a_3p1: ldo19 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22a_3p3: ldo22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vdda_mipi_dsi0_1p2: + vdda_ufs1_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; + + pm8005-rpmh-regulators { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_smp3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + regulator-always-on; + }; + }; +}; + +&cdsp_pas { + firmware-name = "qcom/sdm845/polaris/cdsp.mbn"; + status = "okay"; +}; + +&dsi0 { + vdda-supply = <&vdda_mipi_dsi0_1p2>; + status = "okay"; + + display_panel: panel@0 { + compatible = "jdi,fhd-nt35596s"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + vddio-supply = <&vreg_l14a_1p8>; + backlight = <&pmi8998_wled>; + vddpos-supply = <&lab>; + vddneg-supply = <&ibb>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sde_dsi_active>; + pinctrl-1 = <&sde_dsi_suspend>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + vdds-supply = <&vdda_mipi_dsi0_pll>; + status = "okay"; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&gmu { + status = "okay"; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/polaris/a630_zap.mbn"; + }; +}; + +&ibb { + regulator-min-microvolt = <4600000>; + regulator-max-microvolt = <6000000>; + regulator-over-current-protection; + regulator-pull-down; + regulator-soft-start; + qcom,discharge-resistor-kohms = <300>; +}; + +&ipa { + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm845/polaris/ipa_fws.mbn"; + status = "okay"; +}; + +&i2c14 { + clock-frequency = <400000>; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&tlmm 125 0x2008>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&ts_int_default &ts_reset_default>; + pinctrl-1 = <&ts_int_sleep &ts_reset_sleep>; + + vdd-supply = <&vreg_l28a_3p0>; + vio-supply = <&vreg_tp_vddio>; + + syna,startup-delay-ms = <0xc8>; + syna,reset-delay-ms = <0xc8>; + + rmi4-f01@1 { + syna,nosleep-mode = <0x1>; + reg = <0x1>; + }; + + rmi4-f12@12 { + syna,rezero-wait-ms = <0xc8>; + syna,clip-x-high = <0x438>; + syna,clip-y-high = <0x870>; + syna,sensor-type = <0x1>; + syna,clip-x-low = <0x0>; + syna,clip-y-low = <0x0>; + }; + }; +}; + +&lab { + regulator-min-microvolt = <4600000>; + regulator-max-microvolt = <6000000>; + regulator-soft-start; + regulator-pull-down; +}; + +&mdss { + status = "okay"; +}; + +&mss_pil { + firmware-name = "qcom/sdm845/polaris/mba.mbn", "qcom/sdm845/polaris/modem.mbn"; + status = "okay"; +}; + +&pmi8998_wled { + qcom,current-limit-microamp = <20000>; + qcom,current-boost-limit = <970>; + qcom,ovp-millivolt = <19600>; + qcom,switching-freq = <600>; + qcom,num-strings = <4>; + qcom,cabc; + + status = "okay"; +}; + +&pm8998_gpio { + volume_up_gpio: pm8998_gpio6 { + pinconf { + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + function = "normal"; + pins = "gpio6"; + input-enable; + bias-pull-up; + }; + }; +}; + +&pm8998_pon { + resin { + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + compatible = "qcom,pm8941-resin"; + linux,code = <KEY_VOLUMEDOWN>; + debounce = <15625>; + bias-pull-up; + }; +}; + +&q6afedai { + qi2s@22 { + reg = <22>; + qcom,sd-lines = <0>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qup_i2c14_default { + pinconf { + pins = "gpio33", "gpio34"; + drive-strength = <2>; + bias-disable; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + ts_reset_default: ts-reset-default { + pins = "gpio99"; + function = "gpio"; + drive-strength = <16>; + output-high; + }; + + ts_int_default: ts-int-default { + pins = "gpio125"; + function = "gpio"; + bias-pull-down; + drive-strength = <16>; + input-enable; + }; + + ts_reset_sleep: ts-reset-sleep { + pins = "gpio99"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + ts_int_sleep: ts-int-sleep { + pins = "gpio125"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + input-enable; + }; + + sde_dsi_active: sde-dsi-active { + pins = "gpio6", "gpio10"; + function = "gpio"; + drive-strength = <8>; + bias-disable = <0>; + }; + + sde_dsi_suspend: sde-dsi-suspend { + pins = "gpio6", "gpio10"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wcd_intr_default: wcd-intr-default { + pins = "goui54"; + function = "gpio"; + input-enable; + bias-pull-down; + drive-strength = <2>; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + /* This path is relative to the qca/ subdir under lib/firmware. */ + firmware-name = "polaris/crnv21.bin"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&usb_1 { + /* We'll use this as USB 2.0 only */ + qcom,select-utmi-as-pipe-clk; + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; + + /* Fastest mode for USB 2 */ + maximum-speed = "high-speed"; + + /* Remove USB3 phy */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdd-supply = <&vreg_l1a_0p875>; + + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,imp-res-offset-value = <8>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-pll-supply = <&vreg_l1a_0p875>; + vdda-phy-supply = <&vreg_l26a_1p2>; + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <800000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; + status = "okay"; +}; + +&venus { + firmware-name = "qcom/sdm845/polaris/venus.mbn"; + status = "okay"; +}; + +&wcd9340 { + pinctrl-0 = <&wcd_intr_default>; + pinctrl-names = "default"; + clock-names = "extclk"; + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + reset-gpios = <&tlmm 64 0>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + + qcom,micbias1-microvolt = <2700000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <2700000>; + qcom,micbias4-microvolt = <2700000>; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + + qcom,snoc-host-cap-skip-quirk; + status = "okay"; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-disable; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 038538c8c614..f0e286715d1b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -188,7 +188,7 @@ }; }; - cpus { + cpus: cpus { #address-cells = <2>; #size-cells = <0>; @@ -197,15 +197,14 @@ compatible = "qcom,kryo385"; reg = <0x0 0x0>; enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <611>; dynamic-power-coefficient = <290>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; #cooling-cells = <2>; next-level-cache = <&L2_0>; L2_0: l2-cache { @@ -222,15 +221,14 @@ compatible = "qcom,kryo385"; reg = <0x0 0x100>; enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <611>; dynamic-power-coefficient = <290>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; #cooling-cells = <2>; next-level-cache = <&L2_100>; L2_100: l2-cache { @@ -244,15 +242,14 @@ compatible = "qcom,kryo385"; reg = <0x0 0x200>; enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <611>; dynamic-power-coefficient = <290>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; #cooling-cells = <2>; next-level-cache = <&L2_200>; L2_200: l2-cache { @@ -266,9 +263,6 @@ compatible = "qcom,kryo385"; reg = <0x0 0x300>; enable-method = "psci"; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <611>; dynamic-power-coefficient = <290>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -276,6 +270,8 @@ interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; next-level-cache = <&L2_300>; L2_300: l2-cache { compatible = "cache"; @@ -289,14 +285,13 @@ reg = <0x0 0x400>; enable-method = "psci"; capacity-dmips-mhz = <1024>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; dynamic-power-coefficient = <442>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; #cooling-cells = <2>; next-level-cache = <&L2_400>; L2_400: l2-cache { @@ -311,14 +306,13 @@ reg = <0x0 0x500>; enable-method = "psci"; capacity-dmips-mhz = <1024>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; dynamic-power-coefficient = <442>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; #cooling-cells = <2>; next-level-cache = <&L2_500>; L2_500: l2-cache { @@ -333,14 +327,13 @@ reg = <0x0 0x600>; enable-method = "psci"; capacity-dmips-mhz = <1024>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; dynamic-power-coefficient = <442>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; #cooling-cells = <2>; next-level-cache = <&L2_600>; L2_600: l2-cache { @@ -355,14 +348,13 @@ reg = <0x0 0x700>; enable-method = "psci"; capacity-dmips-mhz = <1024>; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; dynamic-power-coefficient = <442>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; #cooling-cells = <2>; next-level-cache = <&L2_700>; L2_700: l2-cache { @@ -407,53 +399,35 @@ }; }; - idle-states { + cpu_idle_states: idle-states { entry-method = "psci"; LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { compatible = "arm,idle-state"; - idle-state-name = "little-power-down"; - arm,psci-suspend-param = <0x40000003>; + idle-state-name = "little-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; entry-latency-us = <350>; exit-latency-us = <461>; min-residency-us = <1890>; local-timer-stop; }; - LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { - compatible = "arm,idle-state"; - idle-state-name = "little-rail-power-down"; - arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <360>; - exit-latency-us = <531>; - min-residency-us = <3934>; - local-timer-stop; - }; - BIG_CPU_SLEEP_0: cpu-sleep-1-0 { compatible = "arm,idle-state"; - idle-state-name = "big-power-down"; - arm,psci-suspend-param = <0x40000003>; + idle-state-name = "big-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; entry-latency-us = <264>; exit-latency-us = <621>; min-residency-us = <952>; local-timer-stop; }; + }; - BIG_CPU_SLEEP_1: cpu-sleep-1-1 { - compatible = "arm,idle-state"; - idle-state-name = "big-rail-power-down"; - arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <702>; - exit-latency-us = <1061>; - min-residency-us = <4488>; - local-timer-stop; - }; - + domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { - compatible = "arm,idle-state"; - idle-state-name = "cluster-power-down"; - arm,psci-suspend-param = <0x400000F4>; + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x4100c244>; entry-latency-us = <3263>; exit-latency-us = <6562>; min-residency-us = <9987>; @@ -462,7 +436,7 @@ }; }; - cpu0_opp_table: cpu0_opp_table { + cpu0_opp_table: opp-table-cpu0 { compatible = "operating-points-v2"; opp-shared; @@ -557,7 +531,7 @@ }; }; - cpu4_opp_table: cpu4_opp_table { + cpu4_opp_table: opp-table-cpu4 { compatible = "operating-points-v2"; opp-shared; @@ -1050,9 +1024,62 @@ }; }; - psci { + psci: psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; }; soc: soc@0 { @@ -1104,7 +1131,7 @@ clock-names = "core"; }; - qup_opp_table: qup-opp-table { + qup_opp_table: opp-table-qup { compatible = "operating-points-v2"; opp-50000000 { @@ -1181,6 +1208,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1235,6 +1265,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1251,6 +1284,9 @@ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1286,6 +1322,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1302,6 +1341,9 @@ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1337,6 +1379,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1353,6 +1398,9 @@ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1388,6 +1436,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1404,6 +1455,9 @@ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1439,6 +1493,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1455,6 +1512,9 @@ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1490,6 +1550,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1506,6 +1569,9 @@ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1553,6 +1619,9 @@ interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1626,6 +1695,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1642,6 +1714,9 @@ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1677,6 +1752,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1693,6 +1771,9 @@ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1728,6 +1809,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1744,6 +1828,9 @@ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1779,6 +1866,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1795,6 +1885,9 @@ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1830,6 +1923,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1846,6 +1942,9 @@ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1881,6 +1980,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1897,6 +1999,9 @@ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1932,6 +2037,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1948,6 +2056,9 @@ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1984,6 +2095,9 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; }; spi15: spi@a9c000 { @@ -1999,6 +2113,9 @@ interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, + <&gpi_dma1 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -2026,6 +2143,43 @@ interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; + pmu@1436400 { + compatible = "qcom,sdm845-bwmon", "qcom,msm8998-bwmon"; + reg = <0 0x01436400 0 0x600>; + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* + * The interconnect path bandwidth taken from + * cpu4_opp_table bandwidth for OSM L3 + * interconnect. This also matches the OSM L3 + * from bandwidth table of qcom,cpu4-l3lat-mon + * (qcom,core-dev-table, bus width: 16 bytes) + * from msm-4.9 downstream kernel. + */ + opp-0 { + opp-peak-kBps = <4800000>; + }; + opp-1 { + opp-peak-kBps = <9216000>; + }; + opp-2 { + opp-peak-kBps = <15052800>; + }; + opp-3 { + opp-peak-kBps = <20889600>; + }; + opp-4 { + opp-peak-kBps = <25497600>; + }; + }; + }; + pcie0: pci@1c00000 { compatible = "qcom,pcie-sdm845"; reg = <0 0x01c00000 0 0x2000>, @@ -3551,7 +3705,7 @@ }; }; - sdhc_2: sdhci@8804000 { + sdhc_2: mmc@8804000 { compatible = "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; @@ -3569,7 +3723,7 @@ status = "disabled"; - sdhc2_opp_table: sdhc2-opp-table { + sdhc2_opp_table: opp-table { compatible = "operating-points-v2"; opp-9600000 { @@ -3594,7 +3748,7 @@ }; }; - qspi_opp_table: qspi-opp-table { + qspi_opp_table: opp-table-qspi { compatible = "operating-points-v2"; opp-19200000 { @@ -3640,7 +3794,7 @@ qcom,apps-ch-pipes = <0x780000>; qcom,ea-pc = <0x270>; status = "okay"; - dmas = <&slimbam 3>, <&slimbam 4>, + dmas = <&slimbam 3>, <&slimbam 4>, <&slimbam 5>, <&slimbam 6>; dma-names = "rx", "tx", "tx2", "rx2"; @@ -3655,13 +3809,13 @@ wcd9340_ifd: ifd@0{ compatible = "slim217,250"; - reg = <0 0>; + reg = <0 0>; }; wcd9340: codec@1{ compatible = "slim217,250"; - reg = <1 0>; - slim-ifc-dev = <&wcd9340_ifd>; + reg = <1 0>; + slim-ifc-dev = <&wcd9340_ifd>; #sound-dai-cells = <1>; @@ -3692,8 +3846,8 @@ reg = <0xc85 0x40>; interrupts-extended = <&wcd9340 20>; - qcom,dout-ports = <6>; - qcom,din-ports = <2>; + qcom,dout-ports = <6>; + qcom,din-ports = <2>; qcom,ports-sinterval-low =/bits/ 8 <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>; qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >; qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>; @@ -3971,7 +4125,7 @@ compatible = "venus-encoder"; }; - venus_opp_table: venus-opp-table { + venus_opp_table: opp-table { compatible = "operating-points-v2"; opp-100000000 { @@ -4208,7 +4362,7 @@ clock-names = "bi_tcxo"; }; - dsi_opp_table: dsi-opp-table { + dsi_opp_table: opp-table-dsi { compatible = "operating-points-v2"; opp-19200000 { @@ -4248,9 +4402,6 @@ <&dispcc DISP_CC_MDSS_MDP_CLK>; clock-names = "iface", "core"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; - assigned-clock-rates = <300000000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <1>; @@ -4268,7 +4419,7 @@ #size-cells = <2>; ranges; - mdss_mdp: mdp@ae01000 { + mdss_mdp: display-controller@ae01000 { compatible = "qcom,sdm845-dpu"; reg = <0 0x0ae01000 0 0x8f000>, <0 0x0aeb0000 0 0x2008>; @@ -4281,10 +4432,8 @@ <&dispcc DISP_CC_MDSS_VSYNC_CLK>; clock-names = "gcc-bus", "iface", "bus", "core", "vsync"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - assigned-clock-rates = <300000000>, - <19200000>; + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; power-domains = <&rpmhpd SDM845_CX>; @@ -4310,7 +4459,7 @@ }; }; - mdp_opp_table: mdp-opp-table { + mdp_opp_table: opp-table { compatible = "operating-points-v2"; opp-19200000 { @@ -4574,7 +4723,7 @@ }; gmu: gmu@506a000 { - compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; + compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; reg = <0 0x506a000 0 0x30000>, <0 0xb280000 0 0x10000>, @@ -4721,8 +4870,8 @@ cell-index = <0>; }; - imem@146bf000 { - compatible = "simple-mfd"; + sram@146bf000 { + compatible = "qcom,sdm845-imem", "syscon", "simple-mfd"; reg = <0 0x146bf000 0 0x1000>; #address-cells = <1>; @@ -4939,7 +5088,7 @@ compatible = "qcom,bam-v1.7.0"; qcom,controlled-remotely; reg = <0 0x17184000 0 0x2a000>; - num-channels = <31>; + num-channels = <31>; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; qcom,ee = <1>; @@ -4948,9 +5097,9 @@ }; timer@17c90000 { - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; compatible = "arm,armv7-timer-mem"; reg = <0 0x17c90000 0 0x1000>; @@ -4958,49 +5107,49 @@ frame-number = <0>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17ca0000 0 0x1000>, - <0 0x17cb0000 0 0x1000>; + reg = <0x17ca0000 0x1000>, + <0x17cb0000 0x1000>; }; frame@17cc0000 { frame-number = <1>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17cc0000 0 0x1000>; + reg = <0x17cc0000 0x1000>; status = "disabled"; }; frame@17cd0000 { frame-number = <2>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17cd0000 0 0x1000>; + reg = <0x17cd0000 0x1000>; status = "disabled"; }; frame@17ce0000 { frame-number = <3>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17ce0000 0 0x1000>; + reg = <0x17ce0000 0x1000>; status = "disabled"; }; frame@17cf0000 { frame-number = <4>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17cf0000 0 0x1000>; + reg = <0x17cf0000 0x1000>; status = "disabled"; }; frame@17d00000 { frame-number = <5>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17d00000 0 0x1000>; + reg = <0x17d00000 0x1000>; status = "disabled"; }; frame@17d10000 { frame-number = <6>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0 0x17d10000 0 0x1000>; + reg = <0x17d10000 0x1000>; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index f1619b3f97ef..a7af1bed4312 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -41,7 +41,7 @@ pinctrl-names = "default"; pinctrl-0 = <&lid_pin_active>, <&mode_pin_active>; - lid { + switch-lid { gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; @@ -49,7 +49,7 @@ wakeup-event-action = <EV_ACT_DEASSERTED>; }; - mode { + switch-mode { gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; linux,input-type = <EV_SW>; linux,code = <SW_TABLET_MODE>; @@ -581,7 +581,7 @@ }; codec { - sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; + sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; }; }; @@ -611,7 +611,7 @@ }; codec { - sound-dai = <&wcd9340 2>; + sound-dai = <&wcd9340 2>; }; }; }; @@ -817,5 +817,5 @@ &crypto { /* FIXME: qce_start triggers an SError */ - status= "disable"; + status = "disable"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts index 2a552d817b03..b0315eeb1320 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts @@ -509,7 +509,7 @@ }; codec { - sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; + sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; }; }; @@ -539,7 +539,7 @@ }; codec { - sound-dai = <&wcd9340 2>; + sound-dai = <&wcd9340 2>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm850.dtsi b/arch/arm64/boot/dts/qcom/sdm850.dtsi index b1c2cf566c7a..da9f6fbe32f6 100644 --- a/arch/arm64/boot/dts/qcom/sdm850.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm850.dtsi @@ -16,6 +16,5 @@ cpu4_opp34: opp-2956800000 { opp-hz = /bits/ 64 <2956800000>; opp-peak-kBps = <7216000 25497600>; - turbo-mode; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index 871ccbba445b..0aad2e94e757 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -42,11 +42,9 @@ gpio-keys { status = "okay"; compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - vol-dn { + key-vol-dn { label = "Volume Down"; gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -88,11 +86,19 @@ status = "okay"; }; -&sdc2_state_off { +&sdc2_off_state { sd-cd { pins = "gpio98"; + drive-strength = <2>; bias-disable; + }; +}; + +&sdc2_on_state { + sd-cd { + pins = "gpio98"; drive-strength = <2>; + bias-pull-up; }; }; @@ -102,32 +108,6 @@ &tlmm { gpio-reserved-ranges = <22 2>, <28 6>; - - sdc2_state_on: sdc2-on { - clk { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <16>; - }; - - cmd { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <10>; - }; - - data { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <10>; - }; - - sd-cd { - pins = "gpio98"; - bias-pull-up; - drive-strength = <2>; - }; - }; }; &usb3 { diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 135e6e0da27a..8c582a9e4ada 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -386,23 +386,43 @@ interrupt-controller; #interrupt-cells = <2>; - sdc2_state_off: sdc2-off { + sdc2_off_state: sdc2-off-state { clk { pins = "sdc2_clk"; - bias-disable; drive-strength = <2>; + bias-disable; }; cmd { pins = "sdc2_cmd"; + drive-strength = <2>; bias-pull-up; + }; + + data { + pins = "sdc2_data"; drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2_on_state: sdc2-on-state { + clk { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; }; data { pins = "sdc2_data"; + drive-strength = <10>; bias-pull-up; - drive-strength = <2>; }; }; }; @@ -435,7 +455,7 @@ reg = <0x045f0000 0x7000>; }; - sdhc_1: sdhci@4744000 { + sdhc_1: mmc@4744000 { compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5"; reg = <0x04744000 0x1000>, <0x04745000 0x1000>; reg-names = "hc", "core"; @@ -451,12 +471,15 @@ power-domains = <&rpmpd SM6125_VDDCX>; + qcom,dll-config = <0x000f642c>; + qcom,ddr-config = <0x80040873>; + bus-width = <8>; non-removable; status = "disabled"; }; - sdhc_2: sdhci@4784000 { + sdhc_2: mmc@4784000 { compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5"; reg = <0x04784000 0x1000>; reg-names = "hc"; @@ -470,12 +493,15 @@ <&xo_board>; clock-names = "iface", "core", "xo"; - pinctrl-0 = <&sdc2_state_on>; - pinctrl-1 = <&sdc2_state_off>; + pinctrl-0 = <&sdc2_on_state>; + pinctrl-1 = <&sdc2_off_state>; pinctrl-names = "default", "sleep"; power-domains = <&rpmpd SM6125_VDDCX>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040873>; + bus-width = <4>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index d4f8f33f3f0c..d06aefdf3d9e 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -472,7 +472,7 @@ clock-names = "core"; }; - sdhc_1: sdhci@7c4000 { + sdhc_1: mmc@7c4000 { compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x007c4000 0 0x1000>, <0 0x007c5000 0 0x1000>, @@ -489,7 +489,7 @@ clock-names = "iface", "core", "xo"; qcom,dll-config = <0x000f642c>; qcom,ddr-config = <0x80040868>; - power-domains = <&rpmhpd 0>; + power-domains = <&rpmhpd SM6350_CX>; operating-points-v2 = <&sdhc1_opp_table>; bus-width = <8>; non-removable; @@ -497,7 +497,7 @@ status = "disabled"; - sdhc1_opp_table: sdhc1-opp-table { + sdhc1_opp_table: opp-table { compatible = "operating-points-v2"; opp-19200000 { @@ -921,7 +921,7 @@ }; }; - sdhc_2: sdhci@8804000 { + sdhc_2: mmc@8804000 { compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; @@ -935,13 +935,13 @@ clock-names = "iface", "core", "xo"; qcom,dll-config = <0x0007642c>; qcom,ddr-config = <0x80040868>; - power-domains = <&rpmhpd 0>; + power-domains = <&rpmhpd SM6350_CX>; operating-points-v2 = <&sdhc2_opp_table>; bus-width = <4>; status = "disabled"; - sdhc2_opp_table: sdhc2-opp-table { + sdhc2_opp_table: opp-table { compatible = "operating-points-v2"; opp-100000000 { @@ -1304,57 +1304,57 @@ compatible = "arm,armv7-timer-mem"; reg = <0x0 0x17c20000 0x0 0x1000>; clock-frequency = <19200000>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; frame@17c21000 { frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c21000 0x0 0x1000>, - <0x0 0x17c22000 0x0 0x1000>; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; }; frame@17c23000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c23000 0x0 0x1000>; + reg = <0x17c23000 0x1000>; status = "disabled"; }; frame@17c25000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c25000 0x0 0x1000>; + reg = <0x17c25000 0x1000>; status = "disabled"; }; frame@17c27000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c27000 0x0 0x1000>; + reg = <0x17c27000 0x1000>; status = "disabled"; }; frame@17c29000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c29000 0x0 0x1000>; + reg = <0x17c29000 0x1000>; status = "disabled"; }; frame@17c2b000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c2b000 0x0 0x1000>; + reg = <0x17c2b000 0x1000>; status = "disabled"; }; frame@17c2d000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c2d000 0x0 0x1000>; + reg = <0x17c2d000 0x1000>; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index 61925216f5e3..c76abe7587b4 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -48,7 +48,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_pin>; - volume-up { + key-volume-up { label = "volume_up"; linux,code = <KEY_VOLUMEUP>; gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>; @@ -339,7 +339,7 @@ }; &pm6350_gpios { - gpio_keys_pin: gpio-keys-pin { + gpio_keys_pin: gpio-keys-state { pins = "gpio2"; function = PMIC_GPIO_FUNC_NORMAL; bias-pull-up; diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts index 37ddca0f0223..3331ee957d64 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -44,10 +44,10 @@ vin-supply = <&vph_pwr>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - vol-up { + key-vol-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts index a73317e1a824..bb278ecac3fa 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts @@ -49,10 +49,10 @@ vin-supply = <&vph_pwr>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - vol_up { + key-vol-up { label = "Volume Up"; gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 8ea44c4b56b4..7d509ecd44da 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -288,7 +288,7 @@ }; }; - cpu0_opp_table: cpu0_opp_table { + cpu0_opp_table: opp-table-cpu0 { compatible = "operating-points-v2"; opp-shared; @@ -383,7 +383,7 @@ }; }; - cpu4_opp_table: cpu4_opp_table { + cpu4_opp_table: opp-table-cpu4 { compatible = "operating-points-v2"; opp-shared; @@ -473,7 +473,7 @@ }; }; - cpu7_opp_table: cpu7_opp_table { + cpu7_opp_table: opp-table-cpu7 { compatible = "operating-points-v2"; opp-shared; @@ -2187,7 +2187,7 @@ }; gmu: gmu@2c6a000 { - compatible="qcom,adreno-gmu-640.1", "qcom,adreno-gmu"; + compatible = "qcom,adreno-gmu-640.1", "qcom,adreno-gmu"; reg = <0 0x02c6a000 0 0x30000>, <0 0x0b290000 0 0x10000>, @@ -3543,7 +3543,7 @@ }; }; - sdhc_2: sdhci@8804000 { + sdhc_2: mmc@8804000 { compatible = "qcom,sm8150-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; @@ -3563,7 +3563,7 @@ status = "disabled"; - sdhc2_opp_table: sdhc2-opp-table { + sdhc2_opp_table: opp-table { compatible = "operating-points-v2"; opp-19200000 { @@ -3718,7 +3718,7 @@ }; aoss_qmp: power-controller@c300000 { - compatible = "qcom,sm8150-aoss-qmp"; + compatible = "qcom,sm8150-aoss-qmp", "qcom,aoss-qmp"; reg = <0x0 0x0c300000 0x0 0x400>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; mboxes = <&apss_shared 0>; @@ -3944,9 +3944,9 @@ }; timer@17c20000 { - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; compatible = "arm,armv7-timer-mem"; reg = <0x0 0x17c20000 0x0 0x1000>; clock-frequency = <19200000>; @@ -3955,49 +3955,49 @@ frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c21000 0x0 0x1000>, - <0x0 0x17c22000 0x0 0x1000>; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; }; frame@17c23000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c23000 0x0 0x1000>; + reg = <0x17c23000 0x1000>; status = "disabled"; }; frame@17c25000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c25000 0x0 0x1000>; + reg = <0x17c25000 0x1000>; status = "disabled"; }; frame@17c27000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c26000 0x0 0x1000>; + reg = <0x17c26000 0x1000>; status = "disabled"; }; frame@17c29000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c29000 0x0 0x1000>; + reg = <0x17c29000 0x1000>; status = "disabled"; }; frame@17c2b000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c2b000 0x0 0x1000>; + reg = <0x17c2b000 0x1000>; status = "disabled"; }; frame@17c2d000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c2d000 0x0 0x1000>; + reg = <0x17c2d000 0x1000>; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts index 3b082472062b..632e98193d27 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts @@ -53,10 +53,10 @@ vin-supply = <&vph_pwr>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - vol-up { + key-vol-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index e819b5b77363..549e0a2aa9fe 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -57,7 +57,7 @@ * case, they are both on &pm8150b_gpios: camera focus(2), camera snapshot(1). */ - vol-down { + key-vol-down { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index cf0c97bd5ad3..bc773e210023 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -8,6 +8,8 @@ #include <dt-bindings/clock/qcom,gcc-sm8250.h> #include <dt-bindings/clock/qcom,gpucc-sm8250.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h> +#include <dt-bindings/clock/qcom,sm8250-lpass-audiocc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> @@ -336,7 +338,7 @@ }; }; - cpu0_opp_table: cpu0_opp_table { + cpu0_opp_table: opp-table-cpu0 { compatible = "operating-points-v2"; opp-shared; @@ -426,7 +428,7 @@ }; }; - cpu4_opp_table: cpu4_opp_table { + cpu4_opp_table: opp-table-cpu4 { compatible = "operating-points-v2"; opp-shared; @@ -521,7 +523,7 @@ }; }; - cpu7_opp_table: cpu7_opp_table { + cpu7_opp_table: opp-table-cpu7 { compatible = "operating-points-v2"; opp-shared; @@ -628,7 +630,7 @@ firmware { scm: scm { - compatible = "qcom,scm"; + compatible = "qcom,scm-sm8250", "qcom,scm"; #reset-cells = <1>; }; }; @@ -702,6 +704,25 @@ }; }; + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-120000000 { + opp-hz = /bits/ 64 <120000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -914,25 +935,6 @@ clock-names = "core"; }; - qup_opp_table: qup-opp-table { - compatible = "operating-points-v2"; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-120000000 { - opp-hz = /bits/ 64 <120000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - }; - gpi_dma2: dma-controller@800000 { compatible = "qcom,sm8250-gpi-dma"; reg = <0 0x00800000 0 0x70000>; @@ -1884,6 +1886,8 @@ clock-names = "pipe0"; #phy-cells = <0>; + + #clock-cells = <0>; clock-output-names = "pcie_0_pipe_clk"; }; }; @@ -1990,6 +1994,8 @@ clock-names = "pipe0"; #phy-cells = <0>; + + #clock-cells = <0>; clock-output-names = "pcie_1_pipe_clk"; }; }; @@ -2096,6 +2102,8 @@ clock-names = "pipe0"; #phy-cells = <0>; + + #clock-cells = <0>; clock-output-names = "pcie_2_pipe_clk"; }; }; @@ -2188,11 +2196,11 @@ wsamacro: codec@3240000 { compatible = "qcom,sm8250-lpass-wsa-macro"; reg = <0 0x03240000 0 0x1000>; - clocks = <&audiocc 1>, - <&audiocc 0>, + clocks = <&audiocc LPASS_CDC_WSA_MCLK>, + <&audiocc LPASS_CDC_WSA_NPL>, <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&aoncc 0>, + <&aoncc LPASS_CDC_VA_MCLK>, <&vamacro>; clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen"; @@ -2239,7 +2247,7 @@ vamacro: codec@3370000 { compatible = "qcom,sm8250-lpass-va-macro"; reg = <0 0x03370000 0 0x1000>; - clocks = <&aoncc 0>, + clocks = <&aoncc LPASS_CDC_VA_MCLK>, <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; @@ -2569,7 +2577,7 @@ }; gmu: gmu@3d6a000 { - compatible="qcom,adreno-gmu-650.2", "qcom,adreno-gmu"; + compatible = "qcom,adreno-gmu-650.2", "qcom,adreno-gmu"; reg = <0 0x03d6a000 0 0x30000>, <0 0x3de0000 0 0x10000>, @@ -2623,7 +2631,7 @@ }; adreno_smmu: iommu@3da0000 { - compatible = "qcom,sm8250-smmu-500", "arm,mmu-500"; + compatible = "qcom,sm8250-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; reg = <0 0x03da0000 0 0x10000>; #iommu-cells = <2>; #global-interrupts = <2>; @@ -2917,7 +2925,7 @@ }; }; - sdhc_2: sdhci@8804000 { + sdhc_2: mmc@8804000 { compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; @@ -2937,7 +2945,7 @@ status = "disabled"; - sdhc2_opp_table: sdhc2-opp-table { + sdhc2_opp_table: opp-table { compatible = "operating-points-v2"; opp-19200000 { @@ -3010,11 +3018,13 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", - "dm_hs_phy_irq", "ss_phy_irq"; + <&pdc 14 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; @@ -3065,11 +3075,13 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 12 IRQ_TYPE_EDGE_BOTH>, + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>, <&pdc 13 IRQ_TYPE_EDGE_BOTH>, - <&pdc 16 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", - "dm_hs_phy_irq", "ss_phy_irq"; + <&pdc 12 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; power-domains = <&gcc USB30_SEC_GDSC>; @@ -3123,7 +3135,7 @@ compatible = "venus-encoder"; }; - venus_opp_table: venus-opp-table { + venus_opp_table: opp-table { compatible = "operating-points-v2"; opp-720000000 { @@ -3407,6 +3419,7 @@ clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; power-domains = <&rpmhpd SM8250_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; + status = "disabled"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; @@ -3429,9 +3442,6 @@ <&dispcc DISP_CC_MDSS_MDP_CLK>; clock-names = "iface", "bus", "nrt_bus", "core"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; - assigned-clock-rates = <460000000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <1>; @@ -3444,7 +3454,7 @@ #size-cells = <2>; ranges; - mdss_mdp: mdp@ae01000 { + mdss_mdp: display-controller@ae01000 { compatible = "qcom,sm8250-dpu"; reg = <0 0x0ae01000 0 0x8f000>, <0 0x0aeb0000 0 0x2008>; @@ -3456,10 +3466,8 @@ <&dispcc DISP_CC_MDSS_VSYNC_CLK>; clock-names = "iface", "bus", "core", "vsync"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - assigned-clock-rates = <460000000>, - <19200000>; + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; operating-points-v2 = <&mdp_opp_table>; power-domains = <&rpmhpd SM8250_MMCX>; @@ -3486,7 +3494,7 @@ }; }; - mdp_opp_table: mdp-opp-table { + mdp_opp_table: opp-table { compatible = "operating-points-v2"; opp-200000000 { @@ -3656,7 +3664,7 @@ status = "disabled"; - dsi_opp_table: dsi-opp-table { + dsi_opp_table: opp-table { compatible = "operating-points-v2"; opp-187500000 { @@ -3734,7 +3742,7 @@ }; aoss_qmp: power-controller@c300000 { - compatible = "qcom,sm8250-aoss-qmp"; + compatible = "qcom,sm8250-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP @@ -4867,9 +4875,9 @@ }; timer@17c20000 { - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; compatible = "arm,armv7-timer-mem"; reg = <0x0 0x17c20000 0x0 0x1000>; clock-frequency = <19200000>; @@ -4878,49 +4886,49 @@ frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c21000 0x0 0x1000>, - <0x0 0x17c22000 0x0 0x1000>; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; }; frame@17c23000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c23000 0x0 0x1000>; + reg = <0x17c23000 0x1000>; status = "disabled"; }; frame@17c25000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c25000 0x0 0x1000>; + reg = <0x17c25000 0x1000>; status = "disabled"; }; frame@17c27000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c27000 0x0 0x1000>; + reg = <0x17c27000 0x1000>; status = "disabled"; }; frame@17c29000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c29000 0x0 0x1000>; + reg = <0x17c29000 0x1000>; status = "disabled"; }; frame@17c2b000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c2b000 0x0 0x1000>; + reg = <0x17c2b000 0x1000>; status = "disabled"; }; frame@17c2d000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c2d000 0x0 0x1000>; + reg = <0x17c2d000 0x1000>; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts index 9a6faa9393dc..9c4cfd995ff2 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts @@ -336,9 +336,7 @@ status = "okay"; vdda-phy-supply = <&vreg_l5b_0p88>; - vdda-max-microamp = <91600>; vdda-pll-supply = <&vreg_l6b_1p2>; - vdda-pll-max-microamp = <19000>; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi index 90b13cbe2fa6..cb9bbd234b7b 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi @@ -49,7 +49,7 @@ /* For reasons still unknown, GAssist key and Camera Focus/Shutter don't work.. */ - vol-down { + key-vol-down { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; gpios = <&pmk8350_gpios 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 743cba9b683c..e72a04411888 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,dispcc-sm8350.h> #include <dt-bindings/clock/qcom,gcc-sm8350.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/dma/qcom-gpi.h> @@ -341,6 +342,44 @@ }; }; + qup_opp_table_100mhz: opp-table-qup100mhz { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + + qup_opp_table_120mhz: opp-table-qup120mhz { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-120000000 { + opp-hz = /bits/ 64 <120000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + reserved_memory: reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -638,44 +677,6 @@ #mbox-cells = <2>; }; - qup_opp_table_100mhz: qup-100mhz-opp-table { - compatible = "operating-points-v2"; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - }; - - qup_opp_table_120mhz: qup-120mhz-opp-table { - compatible = "operating-points-v2"; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-120000000 { - opp-hz = /bits/ 64 <120000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - }; - gpi_dma2: dma-controller@800000 { compatible = "qcom,sm8350-gpi-dma"; reg = <0 0x00800000 0 0x60000>; @@ -1656,8 +1657,8 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&rpmhpd 0>, - <&rpmhpd 12>; + power-domains = <&rpmhpd SM8350_CX>, + <&rpmhpd SM8350_MSS>; power-domain-names = "cx", "mss"; interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>; @@ -1677,7 +1678,6 @@ IRQ_TYPE_EDGE_RISING>; mboxes = <&ipcc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_GLINK_QMP>; - interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; label = "modem"; qcom,remote-pid = <1>; }; @@ -1718,7 +1718,7 @@ }; aoss_qmp: power-controller@c300000 { - compatible = "qcom,sm8350-aoss-qmp"; + compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; @@ -1933,9 +1933,9 @@ timer@17c20000 { compatible = "arm,armv7-timer-mem"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; reg = <0x0 0x17c20000 0x0 0x1000>; clock-frequency = <19200000>; @@ -1943,49 +1943,49 @@ frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c21000 0x0 0x1000>, - <0x0 0x17c22000 0x0 0x1000>; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; }; frame@17c23000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c23000 0x0 0x1000>; + reg = <0x17c23000 0x1000>; status = "disabled"; }; frame@17c25000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c25000 0x0 0x1000>; + reg = <0x17c25000 0x1000>; status = "disabled"; }; frame@17c27000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c27000 0x0 0x1000>; + reg = <0x17c27000 0x1000>; status = "disabled"; }; frame@17c29000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c29000 0x0 0x1000>; + reg = <0x17c29000 0x1000>; status = "disabled"; }; frame@17c2b000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c2b000 0x0 0x1000>; + reg = <0x17c2b000 0x1000>; status = "disabled"; }; frame@17c2d000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17c2d000 0x0 0x1000>; + reg = <0x17c2d000 0x1000>; status = "disabled"; }; }; @@ -2148,7 +2148,6 @@ <0 0x01d87800 0 0x108>, <0 0x01d87a00 0 0x1e0>; #phy-cells = <0>; - #clock-cells = <0>; }; }; @@ -2167,8 +2166,8 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&rpmhpd 4>, - <&rpmhpd 5>; + power-domains = <&rpmhpd SM8350_LCX>, + <&rpmhpd SM8350_LMX>; power-domain-names = "lcx", "lmx"; memory-region = <&pil_slpi_mem>; @@ -2235,8 +2234,8 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&rpmhpd 0>, - <&rpmhpd 10>; + power-domains = <&rpmhpd SM8350_CX>, + <&rpmhpd SM8350_MXC>; power-domain-names = "cx", "mxc"; interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>; @@ -2381,7 +2380,7 @@ <0 0x088e9800 0 0x200>, <0 0x088e9a00 0 0x100>; #phy-cells = <0>; - #clock-cells = <1>; + #clock-cells = <0>; clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; @@ -2411,7 +2410,7 @@ <0 0x088ec000 0 0x200>, <0 0x088eb200 0 0x1100>; #phy-cells = <0>; - #clock-cells = <1>; + #clock-cells = <0>; clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "usb3_uni_phy_pipe_clk_src"; @@ -2462,11 +2461,13 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", - "dm_hs_phy_irq", "ss_phy_irq"; + <&pdc 14 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; @@ -2510,11 +2511,13 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 12 IRQ_TYPE_EDGE_BOTH>, + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>, <&pdc 13 IRQ_TYPE_EDGE_BOTH>, - <&pdc 16 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", - "dm_hs_phy_irq", "ss_phy_irq"; + <&pdc 12 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; power-domains = <&gcc USB30_SEC_GDSC>; @@ -2532,6 +2535,31 @@ }; }; + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8350-dispcc"; + reg = <0 0x0af00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + clock-names = "bi_tcxo", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + power-domains = <&rpmhpd SM8350_MMCX>; + power-domain-names = "mmcx"; + }; + adsp: remoteproc@17300000 { compatible = "qcom,sm8350-adsp-pas"; reg = <0 0x17300000 0 0x100>; @@ -2547,8 +2575,8 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&rpmhpd 4>, - <&rpmhpd 5>; + power-domains = <&rpmhpd SM8350_LCX>, + <&rpmhpd SM8350_LMX>; power-domain-names = "lcx", "lmx"; memory-region = <&pil_adsp_mem>; diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index 4e51a9d6af98..38ccd44620d0 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -418,8 +418,6 @@ vdda-phy-supply = <&vreg_l5b_0p88>; vdda-pll-supply = <&vreg_l6b_1p2>; - vdda-max-microamp = <173000>; - vdda-pll-max-microamp = <24900>; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts index 236e53974fdd..e58fc7399799 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts @@ -424,8 +424,6 @@ vdda-phy-supply = <&vreg_l5b_0p88>; vdda-pll-supply = <&vreg_l6b_1p2>; - vdda-max-microamp = <173000>; - vdda-pll-max-microamp = <24900>; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index b87756bf1ce4..4978c5ba5dd0 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm8450-camcc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mailbox/qcom-ipcc.h> @@ -258,17 +259,18 @@ firmware { scm: scm { compatible = "qcom,scm-sm8450", "qcom,scm"; + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; #reset-cells = <1>; }; }; - clk_virt: interconnect@0 { + clk_virt: interconnect-0 { compatible = "qcom,sm8450-clk-virt"; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; - mc_virt: interconnect@1 { + mc_virt: interconnect-1 { compatible = "qcom,sm8450-mc-virt"; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -343,7 +345,7 @@ }; }; - qup_opp_table_100mhz: qup-100mhz-opp-table { + qup_opp_table_100mhz: opp-table-qup { compatible = "operating-points-v2"; opp-50000000 { @@ -976,6 +978,19 @@ status = "disabled"; }; + uart20: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart20_default>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + spi20: spi@894000 { compatible = "qcom,geni-spi"; reg = <0 0x00894000 0 0x4000>; @@ -2001,7 +2016,7 @@ <0 0x088e9800 0 0x200>, <0 0x088e9a00 0 0x100>; #phy-cells = <0>; - #clock-cells = <1>; + #clock-cells = <0>; clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; @@ -2012,7 +2027,7 @@ compatible = "qcom,sm8450-slpi-pas"; reg = <0 0x02400000 0 0x4000>; - interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, @@ -2079,7 +2094,7 @@ compatible = "qcom,sm8450-adsp-pas"; reg = <0 0x030000000 0 0x100>; - interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, @@ -2145,7 +2160,7 @@ compatible = "qcom,sm8450-cdsp-pas"; reg = <0 0x032300000 0 0x1400000>; - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, @@ -2251,7 +2266,7 @@ compatible = "qcom,sm8450-mpss-pas"; reg = <0x0 0x04080000 0x0 0x4040>; - interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, @@ -2282,12 +2297,26 @@ IRQ_TYPE_EDGE_RISING>; mboxes = <&ipcc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_GLINK_QMP>; - interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; label = "modem"; qcom,remote-pid = <1>; }; }; + camcc: clock-controller@ade0000 { + compatible = "qcom,sm8450-camcc"; + reg = <0 0x0ade0000 0 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + power-domains = <&rpmhpd SM8450_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + status = "disabled"; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8450-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; @@ -2738,6 +2767,12 @@ drive-strength = <2>; bias-disable; }; + + qup_uart20_default: qup-uart20-default { + pins = "gpio76", "gpio77", "gpio78", "gpio79"; + function = "qup20"; + }; + }; apps_smmu: iommu@15000000 { @@ -2867,9 +2902,9 @@ timer@17420000 { compatible = "arm,armv7-timer-mem"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; reg = <0x0 0x17420000 0x0 0x1000>; clock-frequency = <19200000>; @@ -2877,49 +2912,49 @@ frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17421000 0x0 0x1000>, - <0x0 0x17422000 0x0 0x1000>; + reg = <0x17421000 0x1000>, + <0x17422000 0x1000>; }; frame@17423000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17423000 0x0 0x1000>; + reg = <0x17423000 0x1000>; status = "disabled"; }; frame@17425000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17425000 0x0 0x1000>; + reg = <0x17425000 0x1000>; status = "disabled"; }; frame@17427000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17427000 0x0 0x1000>; + reg = <0x17427000 0x1000>; status = "disabled"; }; frame@17429000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x17429000 0x0 0x1000>; + reg = <0x17429000 0x1000>; status = "disabled"; }; frame@1742b000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x1742b000 0x0 0x1000>; + reg = <0x1742b000 0x1000>; status = "disabled"; }; frame@1742d000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0x1742d000 0x0 0x1000>; + reg = <0x1742d000 0x1000>; status = "disabled"; }; }; @@ -3102,7 +3137,6 @@ <0 0x01d87800 0 0x108>, <0 0x01d87a00 0 0x1e0>; #phy-cells = <0>; - #clock-cells = <0>; }; }; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index e66d76d42e52..7a647860ef35 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -85,3 +85,6 @@ dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb + +dtb-$(CONFIG_ARCH_RCAR_GEN3) += draak-ebisu-panel-aa104xd12.dtbo +dtb-$(CONFIG_ARCH_RCAR_GEN3) += salvator-panel-aa104xd12.dtbo diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi index 142e7ffbd2bd..63e7a39e100e 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi @@ -146,7 +146,7 @@ }; }; - reg_audio: regulator_audio { + reg_audio: regulator-audio { compatible = "regulator-fixed"; regulator-name = "audio-1.8V"; regulator-min-microvolt = <1800000>; @@ -174,7 +174,7 @@ vin-supply = <®_lcd>; }; - reg_cam0: regulator_camera { + reg_cam0: regulator-cam0 { compatible = "regulator-fixed"; regulator-name = "reg_cam0"; regulator-min-microvolt = <1800000>; @@ -183,7 +183,7 @@ enable-active-high; }; - reg_cam1: regulator_camera { + reg_cam1: regulator-cam1 { compatible = "regulator-fixed"; regulator-name = "reg_cam1"; regulator-min-microvolt = <1800000>; diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi index 877d076ffcc9..f5c1d74b738b 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi @@ -20,7 +20,7 @@ clock-output-names = "osc_32k"; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -29,7 +29,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dts b/arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dts new file mode 100644 index 000000000000..258f8668ca36 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree overlay for the AA104XD12 panel connected to LVDS1 on a Draak or + * Ebisu board + * + * Copyright 2021 Ideas on Board Oy + */ + +/dts-v1/; +/plugin/; + +&{/} { +#include "panel-aa104xd12.dtsi" +}; + +&{/panel} { + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; +}; + +&lvds1 { + status = "okay"; + + ports { + port@1 { + lvds1_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi index 7231f820d601..ef3bb835d5c0 100644 --- a/arch/arm64/boot/dts/renesas/draak.dtsi +++ b/arch/arm64/boot/dts/renesas/draak.dtsi @@ -630,7 +630,7 @@ bitclock-master = <&rsnd_for_ak4613>; frame-master = <&rsnd_for_ak4613>; playback = <&ssi3>, <&src5>, <&dvc0>; - capture = <&ssi4>, <&src6>, <&dvc1>; + capture = <&ssi4>, <&src6>, <&dvc1>; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi index 72f359efa23e..8fc03491a11c 100644 --- a/arch/arm64/boot/dts/renesas/ebisu.dtsi +++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi @@ -145,7 +145,7 @@ reg = <0x0 0x48000000 0x0 0x38000000>; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -154,7 +154,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -163,7 +163,7 @@ regulator-always-on; }; - reg_12p0v: regulator2 { + reg_12p0v: regulator-12p0v { compatible = "regulator-fixed"; regulator-name = "D12.0V"; regulator-min-microvolt = <12000000>; @@ -711,7 +711,7 @@ rcar_sound,dai { dai0 { playback = <&ssi0>, <&src0>, <&dvc0>; - capture = <&ssi1>, <&src1>, <&dvc1>; + capture = <&ssi1>, <&src1>, <&dvc1>; }; }; diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi index 935d06515aa6..b062f41ee270 100644 --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi @@ -53,7 +53,7 @@ }; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -62,7 +62,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm64/boot/dts/renesas/panel-aa104xd12.dtsi b/arch/arm64/boot/dts/renesas/panel-aa104xd12.dtsi new file mode 100644 index 000000000000..4b1f0982b9e4 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/panel-aa104xd12.dtsi @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Common file for the AA104XD12 panel connected to Renesas R-Car Gen3 boards. + * + * Copyright (C) 2014 Renesas Electronics Corp. + */ + +panel { + compatible = "mitsubishi,aa104xd12", "panel-lvds"; + + width-mm = <210>; + height-mm = <158>; + data-mapping = "jeida-18"; + + panel-timing { + /* 1024x768 @65Hz */ + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hsync-len = <136>; + hfront-porch = <20>; + hback-porch = <160>; + vfront-porch = <3>; + vback-porch = <29>; + vsync-len = <6>; + }; + + port { + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index b6aeb22e8836..c563d26a7a71 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -1281,7 +1281,7 @@ vin4csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin4>; + remote-endpoint = <&csi40vin4>; }; }; }; @@ -1309,7 +1309,7 @@ vin5csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin5>; + remote-endpoint = <&csi40vin5>; }; }; }; @@ -1952,7 +1952,7 @@ cpu-thermal { polling-delay-passive = <250>; polling-delay = <0>; - thermal-sensors = <&thermal 0>; + thermal-sensors = <&thermal>; sustainable-power = <717>; cooling-maps { diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index d33021202637..565e9d85946e 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -1324,7 +1324,7 @@ vin4csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin4>; + remote-endpoint = <&csi40vin4>; }; }; }; @@ -1352,7 +1352,7 @@ vin5csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin5>; + remote-endpoint = <&csi40vin5>; }; }; }; @@ -2129,7 +2129,7 @@ cpu-thermal { polling-delay-passive = <250>; polling-delay = <0>; - thermal-sensors = <&thermal 0>; + thermal-sensors = <&thermal>; sustainable-power = <717>; cooling-maps { diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index b9731504b7cd..3d668709d8a8 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -41,6 +41,7 @@ device_type = "cpu"; power-domains = <&sysc R8A779A0_PD_A1E0D0C0>; next-level-cache = <&L3_CA76_0>; + clocks = <&cpg CPG_CORE R8A779A0_CLK_Z0>; }; L3_CA76_0: cache-controller-0 { @@ -105,7 +106,8 @@ }; gpio0: gpio@e6058180 { - compatible = "renesas,gpio-r8a779a0"; + compatible = "renesas,gpio-r8a779a0", + "renesas,rcar-gen4-gpio"; reg = <0 0xe6058180 0 0x54>; interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 916>; @@ -119,7 +121,8 @@ }; gpio1: gpio@e6050180 { - compatible = "renesas,gpio-r8a779a0"; + compatible = "renesas,gpio-r8a779a0", + "renesas,rcar-gen4-gpio"; reg = <0 0xe6050180 0 0x54>; interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 915>; @@ -133,7 +136,8 @@ }; gpio2: gpio@e6050980 { - compatible = "renesas,gpio-r8a779a0"; + compatible = "renesas,gpio-r8a779a0", + "renesas,rcar-gen4-gpio"; reg = <0 0xe6050980 0 0x54>; interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 915>; @@ -147,7 +151,8 @@ }; gpio3: gpio@e6058980 { - compatible = "renesas,gpio-r8a779a0"; + compatible = "renesas,gpio-r8a779a0", + "renesas,rcar-gen4-gpio"; reg = <0 0xe6058980 0 0x54>; interrupts = <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 916>; @@ -161,7 +166,8 @@ }; gpio4: gpio@e6060180 { - compatible = "renesas,gpio-r8a779a0"; + compatible = "renesas,gpio-r8a779a0", + "renesas,rcar-gen4-gpio"; reg = <0 0xe6060180 0 0x54>; interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 917>; @@ -175,7 +181,8 @@ }; gpio5: gpio@e6060980 { - compatible = "renesas,gpio-r8a779a0"; + compatible = "renesas,gpio-r8a779a0", + "renesas,rcar-gen4-gpio"; reg = <0 0xe6060980 0 0x54>; interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 917>; @@ -189,7 +196,8 @@ }; gpio6: gpio@e6068180 { - compatible = "renesas,gpio-r8a779a0"; + compatible = "renesas,gpio-r8a779a0", + "renesas,rcar-gen4-gpio"; reg = <0 0xe6068180 0 0x54>; interrupts = <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; @@ -203,7 +211,8 @@ }; gpio7: gpio@e6068980 { - compatible = "renesas,gpio-r8a779a0"; + compatible = "renesas,gpio-r8a779a0", + "renesas,rcar-gen4-gpio"; reg = <0 0xe6068980 0 0x54>; interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; @@ -217,7 +226,8 @@ }; gpio8: gpio@e6069180 { - compatible = "renesas,gpio-r8a779a0"; + compatible = "renesas,gpio-r8a779a0", + "renesas,rcar-gen4-gpio"; reg = <0 0xe6069180 0 0x54>; interrupts = <GIC_SPI 864 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; @@ -231,7 +241,8 @@ }; gpio9: gpio@e6069980 { - compatible = "renesas,gpio-r8a779a0"; + compatible = "renesas,gpio-r8a779a0", + "renesas,rcar-gen4-gpio"; reg = <0 0xe6069980 0 0x54>; interrupts = <GIC_SPI 868 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi index 41aa8591b3b1..28fbf7bc1eb4 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi @@ -55,6 +55,11 @@ function = "i2c4"; }; + scif0_pins: scif0 { + groups = "scif0_data", "scif0_ctrl"; + function = "scif0"; + }; + scif3_pins: scif3 { groups = "scif3_data", "scif3_ctrl"; function = "scif3"; @@ -71,6 +76,14 @@ status = "okay"; }; +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; + &scif3 { pinctrl-0 = <&scif3_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts b/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts index 2e3b719cc749..7a7c8ffba711 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts +++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts @@ -15,6 +15,7 @@ aliases { serial0 = &scif3; + serial1 = &scif0; }; chosen { diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi index df46fb87cffc..384817ffa4de 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi @@ -18,11 +18,171 @@ #address-cells = <1>; #size-cells = <0>; + cpu-map { + cluster0 { + core0 { + cpu = <&a55_0>; + }; + core1 { + cpu = <&a55_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&a55_2>; + }; + core1 { + cpu = <&a55_3>; + }; + }; + + cluster2 { + core0 { + cpu = <&a55_4>; + }; + core1 { + cpu = <&a55_5>; + }; + }; + + cluster3 { + core0 { + cpu = <&a55_6>; + }; + core1 { + cpu = <&a55_7>; + }; + }; + }; + a55_0: cpu@0 { compatible = "arm,cortex-a55"; reg = <0>; device_type = "cpu"; power-domains = <&sysc R8A779F0_PD_A1E0D0C0>; + next-level-cache = <&L3_CA55_0>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>; + }; + + a55_1: cpu@100 { + compatible = "arm,cortex-a55"; + reg = <0x100>; + device_type = "cpu"; + power-domains = <&sysc R8A779F0_PD_A1E0D0C1>; + next-level-cache = <&L3_CA55_0>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>; + }; + + a55_2: cpu@10000 { + compatible = "arm,cortex-a55"; + reg = <0x10000>; + device_type = "cpu"; + power-domains = <&sysc R8A779F0_PD_A1E0D1C0>; + next-level-cache = <&L3_CA55_1>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>; + }; + + a55_3: cpu@10100 { + compatible = "arm,cortex-a55"; + reg = <0x10100>; + device_type = "cpu"; + power-domains = <&sysc R8A779F0_PD_A1E0D1C1>; + next-level-cache = <&L3_CA55_1>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>; + }; + + a55_4: cpu@20000 { + compatible = "arm,cortex-a55"; + reg = <0x20000>; + device_type = "cpu"; + power-domains = <&sysc R8A779F0_PD_A1E1D0C0>; + next-level-cache = <&L3_CA55_2>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>; + }; + + a55_5: cpu@20100 { + compatible = "arm,cortex-a55"; + reg = <0x20100>; + device_type = "cpu"; + power-domains = <&sysc R8A779F0_PD_A1E1D0C1>; + next-level-cache = <&L3_CA55_2>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>; + }; + + a55_6: cpu@30000 { + compatible = "arm,cortex-a55"; + reg = <0x30000>; + device_type = "cpu"; + power-domains = <&sysc R8A779F0_PD_A1E1D1C0>; + next-level-cache = <&L3_CA55_3>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>; + }; + + a55_7: cpu@30100 { + compatible = "arm,cortex-a55"; + reg = <0x30100>; + device_type = "cpu"; + power-domains = <&sysc R8A779F0_PD_A1E1D1C1>; + next-level-cache = <&L3_CA55_3>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>; + }; + + L3_CA55_0: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc R8A779F0_PD_A2E0D0>; + cache-unified; + cache-level = <3>; + }; + + L3_CA55_1: cache-controller-1 { + compatible = "cache"; + power-domains = <&sysc R8A779F0_PD_A2E0D1>; + cache-unified; + cache-level = <3>; + }; + + L3_CA55_2: cache-controller-2 { + compatible = "cache"; + power-domains = <&sysc R8A779F0_PD_A2E1D0>; + cache-unified; + cache-level = <3>; + }; + + L3_CA55_3: cache-controller-3 { + compatible = "cache"; + power-domains = <&sysc R8A779F0_PD_A2E1D1>; + cache-unified; + cache-level = <3>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <4000>; + }; }; }; @@ -45,6 +205,11 @@ interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + /* External SCIF clock - to be overridden by boards that provide it */ scif_clk: scif { compatible = "fixed-clock"; @@ -157,6 +322,18 @@ #power-domain-cells = <1>; }; + tsc: thermal@e6198000 { + compatible = "renesas,r8a779f0-thermal"; + /* The 4th sensor is in control domain and not for Linux */ + reg = <0 0xe6198000 0 0x200>, + <0 0xe61a0000 0 0x200>, + <0 0xe61a8000 0 0x200>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 919>; + #thermal-sensor-cells = <1>; + }; + i2c0: i2c@e6500000 { compatible = "renesas,i2c-r8a779f0", "renesas,rcar-gen4-i2c"; @@ -259,6 +436,120 @@ status = "disabled"; }; + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a779f0", + "renesas,rcar-gen4-hscif", "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 514>, + <&cpg CPG_CORE R8A779F0_CLK_S0D3>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x31>, <&dmac0 0x30>, + <&dmac1 0x31>, <&dmac1 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 514>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a779f0", + "renesas,rcar-gen4-hscif", "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 515>, + <&cpg CPG_CORE R8A779F0_CLK_S0D3>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x33>, <&dmac0 0x32>, + <&dmac1 0x33>, <&dmac1 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 515>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a779f0", + "renesas,rcar-gen4-hscif", "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A779F0_CLK_S0D3>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x35>, <&dmac0 0x34>, + <&dmac1 0x35>, <&dmac1 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 516>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a779f0", + "renesas,rcar-gen4-hscif", "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A779F0_CLK_S0D3>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>, + <&dmac1 0x37>, <&dmac1 0x36>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + + ufs: ufs@e6860000 { + compatible = "renesas,r8a779f0-ufs"; + reg = <0 0xe6860000 0 0x100>; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1514>, <&ufs30_clk>; + clock-names = "fck", "ref_clk"; + freq-table-hz = <200000000 200000000>, <38400000 38400000>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 1514>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a779f0", + "renesas,rcar-gen4-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>, + <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x51>, <&dmac0 0x50>, + <&dmac1 0x51>, <&dmac1 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 702>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a779f0", + "renesas,rcar-gen4-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, + <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x53>, <&dmac0 0x52>, + <&dmac1 0x53>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + }; + scif3: serial@e6c50000 { compatible = "renesas,scif-r8a779f0", "renesas,rcar-gen4-scif", "renesas,scif"; @@ -268,11 +559,31 @@ <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>, + <&dmac1 0x57>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; resets = <&cpg 704>; status = "disabled"; }; + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a779f0", + "renesas,rcar-gen4-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 64>; + interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 705>, + <&cpg CPG_CORE R8A779F0_CLK_S0D3_PER>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>, + <&dmac1 0x59>, <&dmac1 0x58>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 705>; + status = "disabled"; + }; + dmac0: dma-controller@e7350000 { compatible = "renesas,dmac-r8a779f0", "renesas,rcar-gen4-dmac"; @@ -306,6 +617,14 @@ resets = <&cpg 709>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; }; dmac1: dma-controller@e7351000 { @@ -341,6 +660,60 @@ resets = <&cpg 710>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds0 16>, <&ipmmu_ds0 17>, + <&ipmmu_ds0 18>, <&ipmmu_ds0 19>, + <&ipmmu_ds0 20>, <&ipmmu_ds0 21>, + <&ipmmu_ds0 22>, <&ipmmu_ds0 23>, + <&ipmmu_ds0 24>, <&ipmmu_ds0 25>, + <&ipmmu_ds0 26>, <&ipmmu_ds0 27>, + <&ipmmu_ds0 28>, <&ipmmu_ds0 29>, + <&ipmmu_ds0 30>, <&ipmmu_ds0 31>; + }; + + ipmmu_rt0: iommu@ee480000 { + compatible = "renesas,ipmmu-r8a779f0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xee480000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_rt1: iommu@ee4c0000 { + compatible = "renesas,ipmmu-r8a779f0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xee4c0000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 19>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds0: iommu@eed00000 { + compatible = "renesas,ipmmu-r8a779f0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeed00000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_hc: iommu@eed40000 { + compatible = "renesas,ipmmu-r8a779f0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeed40000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: iommu@eefc0000 { + compatible = "renesas,ipmmu-r8a779f0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeefc0000 0 0x20000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + #iommu-cells = <1>; }; gic: interrupt-controller@f1000000 { @@ -351,7 +724,7 @@ reg = <0x0 0xf1000000 0 0x20000>, <0x0 0xf1060000 0 0x110000>; interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; }; prr: chipid@fff00044 { @@ -360,11 +733,62 @@ }; }; + thermal-zones { + sensor_thermal1: sensor1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal2: sensor2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal3: sensor3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + + trips { + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; + + ufs30_clk: ufs30-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779m8.dtsi b/arch/arm64/boot/dts/renesas/r8a779m8.dtsi index 752440b0c40f..750bd8ccdb7f 100644 --- a/arch/arm64/boot/dts/renesas/r8a779m8.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779m8.dtsi @@ -10,3 +10,8 @@ / { compatible = "renesas,r8a779m8", "renesas,r8a7795"; }; + +&cluster0_opp { + /delete-node/ opp-1600000000; + /delete-node/ opp-1700000000; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi index b31fb713ae4d..40201a16d653 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi @@ -483,8 +483,27 @@ }; adc: adc@10059000 { + compatible = "renesas,r9a07g043-adc", "renesas,rzg2l-adc"; reg = <0 0x10059000 0 0x400>; - /* place holder */ + interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD R9A07G043_ADC_ADCLK>, + <&cpg CPG_MOD R9A07G043_ADC_PCLK>; + clock-names = "adclk", "pclk"; + resets = <&cpg R9A07G043_ADC_PRESETN>, + <&cpg R9A07G043_ADC_ADRST_N>; + reset-names = "presetn", "adrst-n"; + power-domains = <&cpg>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + channel@1 { + reg = <1>; + }; }; tsu: thermal@10059400 { diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts index 2d740bd420ca..121e55282d18 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts +++ b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts @@ -13,9 +13,3 @@ model = "Renesas SMARC EVK based on r9a07g043u11"; compatible = "renesas,smarc-evk", "renesas,r9a07g043u11", "renesas,r9a07g043"; }; - -&spi1 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts index 4e07e1a0fb66..3d01a4cf0fbe 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts +++ b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) /* - * Device Tree Source for the RZ/G2L SMARC EVK board + * Device Tree Source for the RZ/V2L SMARC EVK board * * Copyright (C) 2021 Renesas Electronics Corp. */ diff --git a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts index c207d8ce5523..c3a52fa0b16e 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts +++ b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts @@ -14,6 +14,7 @@ aliases { serial0 = &uart0; + ethernet0 = &avb; }; chosen { @@ -35,6 +36,19 @@ }; }; +&avb { + renesas,no-ether-link; + phy-handle = <&phy0>; + phy-mode = "gmii"; + status = "okay"; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id001c.c916", + "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + &extal_clk { clock-frequency = <48000000>; }; diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi index 27810f4ad4cb..d4cc5459fbb7 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi @@ -62,6 +62,57 @@ clock-names = "clk"; }; + avb: ethernet@a3300000 { + compatible = "renesas,etheravb-r9a09g011","renesas,etheravb-rzv2m"; + reg = <0 0xa3300000 0 0x800>; + interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, /* ch0: Rx0 BE */ + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, /* ch1: Rx1 NC */ + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, /* ch18: Tx0 BE */ + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, /* ch19: Tx1 NC */ + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, /* DiA */ + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, /* DiB */ + <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, /* Line1_A */ + <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>, /* Line1_B */ + <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, /* Line2_A */ + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, /* Line2_B */ + <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>; /* Line3 MAC */ + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "dia", "dib", + "err_a", "err_b", "mgmt_a", "mgmt_b", + "line3"; + clocks = <&cpg CPG_MOD R9A09G011_ETH0_CLK_AXI>, + <&cpg CPG_MOD R9A09G011_ETH0_CLK_CHI>, + <&cpg CPG_MOD R9A09G011_ETH0_GPTP_EXT>; + clock-names = "axi", "chi", "gptp"; + resets = <&cpg R9A09G011_ETH0_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; + }; + cpg: clock-controller@a3500000 { compatible = "renesas,r9a09g011-cpg"; reg = <0 0xa3500000 0 0x1000>; diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi index aeacd22e9eb0..9410796c8ad6 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi @@ -34,7 +34,7 @@ reg = <0x0 0x48000000 0x0 0x78000000>; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -43,7 +43,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi index 959a0ad1d367..78e6e2376b01 100644 --- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi @@ -23,7 +23,7 @@ reg = <0x0 0x48000000 0x0 0x38000000>; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -32,7 +32,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi index aa170492dd2b..6be25a8a28db 100644 --- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi @@ -29,7 +29,7 @@ #define SW_RSPI_CAN 1 #endif -#if (SW_SCIF_CAN & SW_RSPI_CAN) +#if (SW_SCIF_CAN && SW_RSPI_CAN) #error "Can not set 1 to both SW_SCIF_CAN and SW_RSPI_CAN due to HW routing" #endif diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi index a663115f5aae..cf3b3d118ef1 100644 --- a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi @@ -24,7 +24,7 @@ reg = <0x0 0x48000000 0x0 0x38000000>; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -33,7 +33,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -57,6 +57,14 @@ #endif }; +#if (SW_SW0_DEV_SEL) +&adc { + pinctrl-0 = <&adc_pins>; + pinctrl-names = "default"; + status = "okay"; +}; +#endif + #if (!SW_ET0_EN_N) ð0 { pinctrl-0 = <ð0_pins>; @@ -124,6 +132,10 @@ }; &pinctrl { + adc_pins: adc { + pinmux = <RZG2L_PORT_PINMUX(6, 2, 1)>; /* ADC_TRG */ + }; + eth0_pins: eth0 { pinmux = <RZG2L_PORT_PINMUX(4, 5, 1)>, /* ET0_LINKSTA */ <RZG2L_PORT_PINMUX(4, 3, 1)>, /* ET0_MDC */ @@ -209,6 +221,13 @@ pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* SD0_CD */ }; }; + + spi1_pins: rspi1 { + pinmux = <RZG2L_PORT_PINMUX(4, 0, 2)>, /* CK */ + <RZG2L_PORT_PINMUX(4, 1, 2)>, /* MOSI */ + <RZG2L_PORT_PINMUX(4, 2, 2)>, /* MISO */ + <RZG2L_PORT_PINMUX(4, 3, 2)>; /* SSL */ + }; }; #if (SW_SW0_DEV_SEL) diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi index 0051634d7b1c..f9835c12023e 100644 --- a/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi @@ -51,6 +51,12 @@ status = "disabled"; }; +&spi1 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; + &ssi1 { /delete-property/ pinctrl-0; /delete-property/ pinctrl-names; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 31837fcd7bf0..b7c7911858b2 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -170,7 +170,7 @@ }; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -179,7 +179,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -188,7 +188,7 @@ regulator-always-on; }; - reg_12v: regulator2 { + reg_12v: regulator-12v { compatible = "regulator-fixed"; regulator-name = "fixed-12V"; regulator-min-microvolt = <12000000>; @@ -832,7 +832,7 @@ frame-master = <&rsnd_endpoint0>; playback = <&ssi0>, <&src0>, <&dvc0>; - capture = <&ssi1>, <&src1>, <&dvc1>; + capture = <&ssi1>, <&src1>, <&dvc1>; }; }; diff --git a/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dts b/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dts new file mode 100644 index 000000000000..c83a30adc6ad --- /dev/null +++ b/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree overlay for the AA104XD12 panel connected to LVDS0 on a + * Salvator-X or Salvator-XS board + * + * Copyright 2021 Ideas on Board Oy + */ + +/dts-v1/; +/plugin/; + +&{/} { +#include "panel-aa104xd12.dtsi" +}; + +&{/panel} { + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index 5bcb84403ef6..408871c2859d 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -206,12 +206,12 @@ clocks = <&clksndsel>; clock-names = "scki"; - VDD1-supply = <&snd_3p3v>; - VDD2-supply = <&snd_3p3v>; - VCCAD1-supply = <&snd_vcc5v>; - VCCAD2-supply = <&snd_vcc5v>; - VCCDA1-supply = <&snd_vcc5v>; - VCCDA2-supply = <&snd_vcc5v>; + VDD1-supply = <&snd_3p3v>; + VDD2-supply = <&snd_3p3v>; + VCCAD1-supply = <&snd_vcc5v>; + VCCAD2-supply = <&snd_vcc5v>; + VCCDA1-supply = <&snd_vcc5v>; + VCCDA2-supply = <&snd_vcc5v>; ports { #address-cells = <1>; @@ -438,7 +438,7 @@ bitclock-master; frame-master; dai-tdm-slot-num = <6>; - capture = <&ssi4>; + capture = <&ssi4>; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 90a4c0629d24..0772dfe4adff 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -76,7 +76,7 @@ }; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -85,7 +85,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -411,7 +411,7 @@ bitclock-master; frame-master; playback = <&ssi0>, <&src0>, <&dvc0>; - capture = <&ssi1>, <&src1>, <&dvc1>; + capture = <&ssi1>, <&src1>, <&dvc1>; }; }; rsnd_port1: port@1 { diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 18d00eae3072..ef79a672804a 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 56dfbb2e2fa6..214f94fea3dc 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -528,7 +528,7 @@ i2c0: i2c@ff180000 { compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c"; reg = <0x0 0xff180000 0x0 0x1000>; - clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>; + clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>; clock-names = "i2c", "pclk"; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts index 9b4f855ea5d4..9fe9b0d11003 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts @@ -75,7 +75,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwr_key>; - power { + key-power { gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; diff --git a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts new file mode 100644 index 000000000000..a71f249ed384 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts @@ -0,0 +1,253 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Akash Gajjar <akash@openedev.com> + * Copyright (c) 2019 Jagan Teki <jagan@openedev.com> + */ + +/dts-v1/; +#include "rk3308.dtsi" + +/ { + model = "Radxa ROCK Pi S"; + compatible = "radxa,rockpis", "rockchip,rk3308"; + + aliases { + ethernet0 = &gmac; + mmc0 = &emmc; + mmc1 = &sdmmc; + }; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&green_led_gio>, <&heartbeat_led_gpio>; + + green-led { + default-state = "on"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + label = "rockpis:green:power"; + linux,default-trigger = "default-on"; + }; + + blue-led { + default-state = "on"; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + label = "rockpis:blue:user"; + linux,default-trigger = "heartbeat"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-0 = <&wifi_enable_h>; + pinctrl-names = "default"; + reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; + }; + + vcc_1v8: vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_io>; + }; + + vcc_io: vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_ddr: vcc-ddr { + compatible = "regulator-fixed"; + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_otg: vcc5v0-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-name = "vcc5v0_otg"; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vdd_core: vdd-core { + compatible = "pwm-regulator"; + pwms = <&pwm0 0 5000 1>; + pwm-supply = <&vcc5v0_sys>; + regulator-name = "vdd_core"; + regulator-min-microvolt = <827000>; + regulator-max-microvolt = <1340000>; + regulator-init-microvolt = <1015000>; + regulator-settling-time-up-us = <250>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_log: vdd-log { + compatible = "regulator-fixed"; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_core>; +}; + +&emmc { + bus-width = <4>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + non-removable; + vmmc-supply = <&vcc_io>; + status = "okay"; +}; + +&gmac { + clock_in_out = "output"; + phy-supply = <&vcc_io>; + snps,reset-gpio = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 50000 50000>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&rtc_32k>; + + leds { + green_led_gio: green-led-gpio { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + heartbeat_led_gpio: heartbeat-led-gpio { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake: wifi-host-wake { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&pwm0 { + status = "okay"; + pinctrl-0 = <&pwm0_pin_pull_down>; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdio { + #address-cells = <1>; + #size-cells = <0>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + max-frequency = <1000000>; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdmmc { + cap-sd-highspeed; + status = "okay"; +}; + +&u2phy { + status = "okay"; + + u2phy_host: host-port { + phy-supply = <&vcc5v0_otg>; + status = "okay"; + }; + + u2phy_otg: otg-port { + phy-supply = <&vcc5v0_otg>; + status = "okay"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart4 { + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8723bs-bt"; + device-wake-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; + }; +}; + +&usb_host_ehci { + status = "okay"; +}; + +&usb_host_ohci { + status = "okay"; +}; + +&usb20_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts index ea0695b51ecd..415aa9ff8bd4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts @@ -71,82 +71,82 @@ * |------------------------------------------------| */ - sw1 { + button-sw1 { gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>; label = "DPAD-UP"; linux,code = <BTN_DPAD_UP>; }; - sw2 { + button-sw2 { gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>; label = "DPAD-DOWN"; linux,code = <BTN_DPAD_DOWN>; }; - sw3 { + button-sw3 { gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; label = "DPAD-LEFT"; linux,code = <BTN_DPAD_LEFT>; }; - sw4 { + button-sw4 { gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>; label = "DPAD-RIGHT"; linux,code = <BTN_DPAD_RIGHT>; }; - sw5 { + button-sw5 { gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>; label = "BTN-A"; linux,code = <BTN_EAST>; }; - sw6 { + button-sw6 { gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>; label = "BTN-B"; linux,code = <BTN_SOUTH>; }; - sw7 { + button-sw7 { gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>; label = "BTN-Y"; linux,code = <BTN_WEST>; }; - sw8 { + button-sw8 { gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>; label = "BTN-X"; linux,code = <BTN_NORTH>; }; - sw9 { + button-sw9 { gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; label = "F1"; linux,code = <BTN_TRIGGER_HAPPY1>; }; - sw10 { + button-sw10 { gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>; label = "F2"; linux,code = <BTN_TRIGGER_HAPPY2>; }; - sw11 { + button-sw11 { gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; label = "F3"; linux,code = <BTN_TRIGGER_HAPPY3>; }; - sw12 { + button-sw12 { gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>; label = "F4"; linux,code = <BTN_TRIGGER_HAPPY4>; }; - sw13 { + button-sw13 { gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>; label = "F5"; linux,code = <BTN_TRIGGER_HAPPY5>; }; - sw14 { + button-sw14 { gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>; label = "F6"; linux,code = <BTN_TRIGGER_HAPPY6>; }; - sw15 { + button-sw15 { gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>; label = "TOP-LEFT"; linux,code = <BTN_TL>; }; - sw16 { + button-sw16 { gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>; label = "TOP-RIGHT"; linux,code = <BTN_TR>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts index 3857d487ab84..1445b879ac7a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts @@ -34,7 +34,7 @@ pinctrl-0 = <&reset_button_pin>; pinctrl-names = "default"; - reset { + key-reset { label = "reset"; gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; linux,code = <KEY_RESTART>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi index 15d1fc541c38..083452c67711 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi @@ -76,7 +76,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwr_key>; - power { + key-power { wakeup-source; gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts index 62aa97a0b8c9..be06e6e64d18 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts @@ -43,7 +43,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwr_key>; - power { + key-power { gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts index 3ebe15e03cf4..7f5bba0c6001 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts @@ -44,7 +44,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwr_key>; - power { + key-power { wakeup-source; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; label = "GPIO Power"; @@ -134,7 +134,7 @@ vccio_sd: vcc-io-sd-regulator { compatible = "regulator-fixed"; - regulator-name= "vccio_sd"; + regulator-name = "vccio_sd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts index 5ccaa5f7a370..29df84b81552 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts @@ -30,7 +30,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwr_key>; - power { + key-power { gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts index 959d3cc801f2..38d757c00548 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts @@ -37,7 +37,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwr_key>; - power { + key-power { wakeup-source; gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 4f0b5feaa5e6..a4c5aaf1f457 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -1084,7 +1084,7 @@ gmac { rgmii_pins: rgmii-pins { - rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>, + rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>, <3 RK_PD0 1 &pcfg_pull_none>, <3 RK_PC3 1 &pcfg_pull_none>, <3 RK_PB0 1 &pcfg_pull_none_12ma>, @@ -1102,7 +1102,7 @@ }; rmii_pins: rmii-pins { - rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>, + rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>, <3 RK_PD0 1 &pcfg_pull_none>, <3 RK_PC3 1 &pcfg_pull_none>, <3 RK_PB0 1 &pcfg_pull_none_12ma>, @@ -1257,7 +1257,7 @@ spdif { spdif_tx: spdif-tx { - rockchip,pins = <2 RK_PC7 1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PC7 1 &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts index 7b717ebec8ff..3d1e126b553f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts @@ -55,7 +55,7 @@ }; edp_panel: edp-panel { - compatible ="lg,lp079qx1-sp0v"; + compatible = "lg,lp079qx1-sp0v"; backlight = <&backlight>; enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; power-supply = <&vcc3v3_s0>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index b340c9e246c4..c5db64f3e124 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -87,7 +87,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - power { + key-power { debounce-interval = <100>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Key Power"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi index 50d459ee4831..cd074641884b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -206,7 +206,7 @@ pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l>; - wake_on_bt: wake-on-bt { + wake_on_bt: key-wake-on-bt { label = "Wake-on-Bluetooth"; gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index 6863689df06f..2cc9b3386c16 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -92,7 +92,7 @@ pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>; - pen-insert { + switch-pen-insert { label = "Pen Insert"; /* Insert = low, eject = high */ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index 1977103a5ef4..40d4053fba80 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -183,7 +183,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pen_eject_odl>; - pen-insert { + switch-pen-insert { label = "Pen Insert"; /* Insert = low, eject = high */ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi index 46c4581deb8d..2a332763c35c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi @@ -136,7 +136,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - power { + key-power { debounce-interval = <100>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Key Power"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts index cef4d18b599d..fe5b52610010 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts @@ -46,9 +46,9 @@ gpio-keys { pinctrl-0 = <&reset_button_pin>; - /delete-node/ power; + /delete-node/ key-power; - reset { + key-reset { debounce-interval = <50>; gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>; label = "reset"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi index 248ad41a976b..278123b4f911 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi @@ -111,7 +111,7 @@ pinctrl-names = "default"; pinctrl-0 = <&power_key>; - power { + key-power { debounce-interval = <100>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Key Power"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts index ed856bfcfc33..9e2e246e0bab 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts @@ -78,7 +78,7 @@ compatible = "gpio-keys"; autorepeat; - power { + key-power { debounce-interval = <100>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts index d6b68d77d63a..194e48c755f6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts @@ -76,7 +76,7 @@ pinctrl-names = "default"; pinctrl-0 = <&lidbtn_pin>; - lid { + switch-lid { debounce-interval = <20>; gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>; label = "Lid"; @@ -92,7 +92,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwrbtn_pin>; - power { + key-power { debounce-interval = <20>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "Power"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index 3ae5d727e367..04c752f49be9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -49,7 +49,7 @@ sgtl5000_clk: sgtl5000-oscillator { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <24576000>; + clock-frequency = <24576000>; }; dc_12v: dc-12v { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi index 0e45cc2d195b..acb174d3a8c5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -54,7 +54,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwr_key_l>; - power { + key-power { debounce-interval = <100>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Key Power"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi index 45e77f86d329..78157521e944 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -20,6 +20,15 @@ stdout-path = "serial2:1500000n8"; }; + /* enable for panel backlight support */ + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <5>; + pwms = <&pwm0 0 1000000 0>; + status = "disabled"; + }; + clkin_gmac: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -33,7 +42,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - power { + key-power { debounce-interval = <100>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Key Power"; @@ -107,6 +116,14 @@ }; }; + avdd: avdd-regulator { + compatible = "regulator-fixed"; + regulator-name = "avdd"; + regulator-min-microvolt = <11000000>; + regulator-max-microvolt = <11000000>; + vin-supply = <&vcc3v3_s0>; + }; + vcc12v_dcin: vcc12v-dcin { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -400,8 +417,6 @@ vcc3v0_touch: LDO_REG2 { regulator-name = "vcc3v0_touch"; - regulator-always-on; - regulator-boot-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-state-mem { @@ -490,8 +505,6 @@ vcc3v3_s0: SWITCH_REG2 { regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; @@ -565,6 +578,19 @@ vbus-supply = <&vcc5v0_typec>; status = "okay"; }; + + /* enable for pine64 touch screen support */ + touch: touchscreen@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>; + AVDD28-supply = <&vcc3v0_touch>; + VDDIO-supply = <&vcc3v0_touch>; + irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; }; &i2s0 { @@ -600,6 +626,42 @@ gpio1830-supply = <&vcc_3v0>; }; +/* enable for pine64 panel display support */ +&mipi_dsi { + clock-master; + status = "disabled"; + + ports { + mipi_out: port@1 { + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + mipi_panel: panel@0 { + compatible = "feiyang,fy07024di26a30d"; + reg = <0>; + avdd-supply = <&avdd>; + backlight = <&backlight>; + dvdd-supply = <&vcc3v3_s0>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; + }; +}; + &pcie0 { ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; num-lanes = <4>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts index f6b2199a42bd..13927e7d0724 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts @@ -88,7 +88,7 @@ }; edp_panel: edp-panel { - compatible ="lg,lp079qx1-sp0v"; + compatible = "lg,lp079qx1-sp0v"; backlight = <&backlight>; enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index 2aa0fad8f893..e6ac292ce645 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -53,7 +53,7 @@ compatible = "gpio-keys"; autorepeat; - power { + key-power { debounce-interval = <100>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi index 01d1a75c8b4d..935b8c68a71d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi @@ -347,7 +347,7 @@ pcie { pcie_pwr: pcie-pwr { - rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi index e01668e6e5f9..0d45868132b9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi @@ -49,7 +49,7 @@ pinctrl-0 = <&hall_int_l>; pinctrl-names = "default"; - cover { + switch-cover { label = "cover"; gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts index fa953b736642..d943559b157c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts @@ -4,6 +4,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> #include "rk3566.dtsi" / { @@ -32,9 +33,22 @@ gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; gpio-fan,speed-map = <0 0 4500 1>; + pinctrl-names = "default"; + pinctrl-0 = <&fan_en_h>; #cooling-cells = <2>; }; + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -125,6 +139,18 @@ vin-supply = <&vcc12v_dcin>; }; + vcc3v3_pcie_p: vcc3v3-pcie-p-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_enable_h>; + regulator-name = "vcc3v3_pcie_p"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + }; + vcc5v0_usb: vcc5v0_usb { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usb"; @@ -201,6 +227,10 @@ status = "okay"; }; +&combphy2 { + status = "okay"; +}; + &cpu0 { cpu-supply = <&vdd_cpu>; }; @@ -262,6 +292,28 @@ status = "okay"; }; +&hdmi { + avdd-0v9-supply = <&vdda_0v9>; + avdd-1v8-supply = <&vcc_1v8>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -492,6 +544,10 @@ status = "okay"; }; +&i2s0_8ch { + status = "okay"; +}; + &i2s1_8ch { pinctrl-names = "default"; pinctrl-0 = <&i2s1m0_sclktx @@ -509,6 +565,14 @@ }; }; +&pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_h>; + reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie_p>; + status = "okay"; +}; + &pinctrl { bt { bt_enable_h: bt-enable-h { @@ -524,6 +588,12 @@ }; }; + fan { + fan_en_h: fan-en-h { + rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + leds { work_led_enable_h: work-led-enable-h { rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; @@ -534,6 +604,16 @@ }; }; + pcie { + pcie_enable_h: pcie-enable-h { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_reset_h: pcie-reset-h { + rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; @@ -588,6 +668,7 @@ disable-wp; pinctrl-names = "default"; pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + sd-uhs-sdr104; vmmc-supply = <&vcc3v3_sd>; vqmmc-supply = <&vccio_sd>; status = "okay"; @@ -608,6 +689,22 @@ status = "okay"; }; +&sfc { + pinctrl-0 = <&fspi_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + /* spdif is exposed on con40 pin 18 */ &spdif { status = "okay"; @@ -723,3 +820,20 @@ phy-supply = <&vcc5v0_usb20_host>; status = "okay"; }; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566.dtsi b/arch/arm64/boot/dts/rockchip/rk3566.dtsi index 0b957068ff89..6c4b17d27bdc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566.dtsi @@ -29,3 +29,7 @@ extcon = <&usb2phy0>; maximum-speed = "high-speed"; }; + +&vop { + compatible = "rockchip,rk3566-vop"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts index 40cf2236c0b6..1d3ffbf3cde8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts @@ -8,6 +8,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> #include "rk3568.dtsi" / { @@ -54,6 +55,17 @@ regulator-max-microvolt = <12000000>; }; + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + vcc3v3_sys: vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; @@ -174,6 +186,33 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -215,6 +254,7 @@ vdd_gpu: DCDC_REG2 { regulator-name = "vdd_gpu"; + regulator-always-on; regulator-init-microvolt = <900000>; regulator-initial-mode = <0x2>; regulator-min-microvolt = <500000>; @@ -264,6 +304,7 @@ vdda0v9_image: LDO_REG1 { regulator-name = "vdda0v9_image"; + regulator-always-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; @@ -359,6 +400,7 @@ vcca1v8_image: LDO_REG9 { regulator-name = "vcca1v8_image"; + regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -389,11 +431,33 @@ }; }; +&i2c3 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD3 IRQ_TYPE_EDGE_FALLING>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "rtcic_32kout"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + &i2c5 { /* pin 3 (SDA) + 4 (SCL) of header con2 */ status = "disabled"; }; +&i2s0_8ch { + /* hdmi sound */ + status = "okay"; +}; + &mdio1 { rgmii_phy1: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; @@ -411,6 +475,12 @@ }; }; + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic_int { rockchip,pins = @@ -523,6 +593,8 @@ }; &tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; status = "okay"; }; @@ -587,3 +659,20 @@ phy-supply = <&vcc5v0_usb_otg>; status = "okay"; }; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts index 622be8be9813..6ff89ff95ad1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts @@ -8,6 +8,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> #include "rk3568.dtsi" / { @@ -34,6 +35,17 @@ regulator-max-microvolt = <12000000>; }; + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -209,6 +221,28 @@ status = "okay"; }; +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -466,6 +500,10 @@ }; }; +&i2s0_8ch { + status = "okay"; +}; + &i2s1_8ch { rockchip,trcm-sync-tx-only; status = "okay"; @@ -635,3 +673,20 @@ phy-supply = <&vcc5v0_usb_host>; status = "okay"; }; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts index 0813c0c5abde..6b5093a1a6cf 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts @@ -4,6 +4,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> #include "rk3568.dtsi" / { @@ -20,6 +21,17 @@ stdout-path = "serial2:1500000n8"; }; + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -166,6 +178,28 @@ status = "okay"; }; +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -406,6 +440,10 @@ }; }; +&i2s0_8ch { + status = "okay"; +}; + &i2s1_8ch { rockchip,trcm-sync-tx-only; status = "okay"; @@ -560,3 +598,20 @@ phy-supply = <&vcc5v0_usb_host>; status = "okay"; }; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi index 5eafddf62edc..2bdf8c7e9765 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi @@ -137,3 +137,7 @@ phys = <&usb2phy0_otg>, <&combphy0 PHY_TYPE_USB3>; phy-names = "usb2-phy", "usb3-phy"; }; + +&vop { + compatible = "rockchip,rk3568-vop"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi index 914f13c0d399..319981c3e9f7 100644 --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi @@ -129,6 +129,11 @@ }; }; + display_subsystem: display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop_out>; + }; + firmware { scmi: scmi { compatible = "arm,scmi-smc"; @@ -178,6 +183,22 @@ }; }; + hdmi_sound: hdmi-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "HDMI"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + status = "disabled"; + + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s0_8ch>; + }; + }; + pmu { compatible = "arm,cortex-a55-pmu"; interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>, @@ -632,6 +653,84 @@ }; }; + vop: vop@fe040000 { + reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>; + reg-names = "vop", "gamma-lut"; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>, <&cru DCLK_VOP0>, + <&cru DCLK_VOP1>, <&cru DCLK_VOP2>; + clock-names = "aclk", "hclk", "dclk_vp0", "dclk_vp1", "dclk_vp2"; + iommus = <&vop_mmu>; + power-domains = <&power RK3568_PD_VO>; + rockchip,grf = <&grf>; + status = "disabled"; + + vop_out: ports { + #address-cells = <1>; + #size-cells = <0>; + + vp0: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + vp1: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + vp2: port@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + vop_mmu: iommu@fe043e00 { + compatible = "rockchip,rk3568-iommu"; + reg = <0x0 0xfe043e00 0x0 0x100>, <0x0 0xfe043f00 0x0 0x100>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + status = "disabled"; + }; + + hdmi: hdmi@fe0a0000 { + compatible = "rockchip,rk3568-dw-hdmi"; + reg = <0x0 0xfe0a0000 0x0 0x20000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_HDMI_HOST>, + <&cru CLK_HDMI_SFR>, + <&cru CLK_HDMI_CEC>, + <&pmucru CLK_HDMI_REF>, + <&cru HCLK_VO>; + clock-names = "iahb", "isfr", "cec", "ref"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>; + power-domains = <&power RK3568_PD_VO>; + reg-io-width = <4>; + rockchip,grf = <&grf>; + #sound-dai-cells = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + }; + + hdmi_out: port@1 { + reg = <1>; + }; + }; + }; + qos_gpu: qos@fe128000 { compatible = "rockchip,rk3568-qos", "syscon"; reg = <0x0 0xfe128000 0x0 0x20>; @@ -752,6 +851,56 @@ reg = <0x0 0xfe1a8100 0x0 0x20>; }; + pcie2x1: pcie@fe260000 { + compatible = "rockchip,rk3568-pcie"; + reg = <0x3 0xc0000000 0x0 0x00400000>, + <0x0 0xfe260000 0x0 0x00010000>, + <0x3 0x3f000000 0x0 0x01000000>; + reg-names = "dbi", "apb", "config"; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "sys", "pmc", "msi", "legacy", "err"; + bus-range = <0x0 0xf>; + clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>, + <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>, + <&cru CLK_PCIE20_AUX_NDFT>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", "aux"; + device_type = "pci"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + linux,pci-domain = <0>; + num-ib-windows = <6>; + num-ob-windows = <2>; + max-link-speed = <2>; + msi-map = <0x0 &gic 0x0 0x1000>; + num-lanes = <1>; + phys = <&combphy2 PHY_TYPE_PCIE>; + phy-names = "pcie-phy"; + power-domains = <&power RK3568_PD_PIPE>; + ranges = <0x01000000 0x0 0x3ef00000 0x3 0x3ef00000 0x0 0x00100000 + 0x02000000 0x0 0x00000000 0x3 0x00000000 0x0 0x3ef00000>; + resets = <&cru SRST_PCIE20_POWERUP>; + reset-names = "pipe"; + #address-cells = <3>; + #size-cells = <2>; + status = "disabled"; + + pcie_intc: legacy-interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>; + }; + }; + sdmmc0: mmc@fe2b0000 { compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe2b0000 0x0 0x4000>; @@ -818,6 +967,23 @@ status = "disabled"; }; + i2s0_8ch: i2s@fe400000 { + compatible = "rockchip,rk3568-i2s-tdm"; + reg = <0x0 0xfe400000 0x0 0x1000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>; + assigned-clock-rates = <1188000000>, <1188000000>; + clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + dmas = <&dmac1 0>; + dma-names = "tx"; + resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>; + reset-names = "tx-m", "rx-m"; + rockchip,grf = <&grf>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + i2s1_8ch: i2s@fe410000 { compatible = "rockchip,rk3568-i2s-tdm"; reg = <0x0 0xfe410000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi b/arch/arm64/boot/dts/sprd/sc9836.dtsi index 231436be0e3f..8bb8a70966d2 100644 --- a/arch/arm64/boot/dts/sprd/sc9836.dtsi +++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi @@ -207,11 +207,11 @@ }; psci { - compatible = "arm,psci"; - method = "smc"; - cpu_on = <0xc4000003>; - cpu_off = <0x84000002>; - cpu_suspend = <0xc4000001>; + compatible = "arm,psci"; + method = "smc"; + cpu_on = <0xc4000003>; + cpu_off = <0x84000002>; + cpu_suspend = <0xc4000001>; }; timer { diff --git a/arch/arm64/boot/dts/sprd/sc9863a.dtsi b/arch/arm64/boot/dts/sprd/sc9863a.dtsi index 8cf4a6575980..22d81ace740a 100644 --- a/arch/arm64/boot/dts/sprd/sc9863a.dtsi +++ b/arch/arm64/boot/dts/sprd/sc9863a.dtsi @@ -552,7 +552,7 @@ ranges; sdio0: sdio@20300000 { - compatible = "sprd,sdhci-r11"; + compatible = "sprd,sdhci-r11"; reg = <0 0x20300000 0 0x1000>; interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; @@ -568,7 +568,7 @@ }; sdio3: sdio@20600000 { - compatible = "sprd,sdhci-r11"; + compatible = "sprd,sdhci-r11"; reg = <0 0x20600000 0 0x1000>; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi index 89d91abbd5d1..fece49704b5c 100644 --- a/arch/arm64/boot/dts/sprd/whale2.dtsi +++ b/arch/arm64/boot/dts/sprd/whale2.dtsi @@ -134,7 +134,7 @@ }; sdio3: sdio@50430000 { - compatible = "sprd,sdhci-r11"; + compatible = "sprd,sdhci-r11"; reg = <0 0x50430000 0 0x1000>; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/tesla/fsd-evb.dts b/arch/arm64/boot/dts/tesla/fsd-evb.dts index 5af560c1b5e6..1db6ddf03f01 100644 --- a/arch/arm64/boot/dts/tesla/fsd-evb.dts +++ b/arch/arm64/boot/dts/tesla/fsd-evb.dts @@ -37,3 +37,7 @@ &serial_0 { status = "okay"; }; + +&ufs { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi index d4d0cb005712..d0abb9aa0e9e 100644 --- a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi +++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi @@ -8,7 +8,7 @@ * https://www.tesla.com */ -#include <dt-bindings/pinctrl/samsung.h> +#include "fsd-pinctrl.h" &pinctrl_fsys0 { gpf0: gpf0-gpio-bank { @@ -50,6 +50,20 @@ interrupt-controller; #interrupt-cells = <2>; }; + + ufs_rst_n: ufs-rst-n-pins { + samsung,pins = "gpf5-0"; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_NONE>; + samsung,pin-drv = <FSD_PIN_DRV_LV2>; + }; + + ufs_refclk_out: ufs-refclk-out-pins { + samsung,pins = "gpf5-1"; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_NONE>; + samsung,pin-drv = <FSD_PIN_DRV_LV2>; + }; }; &pinctrl_peric { @@ -223,107 +237,107 @@ pwm0_out: pwm0-out-pins { samsung,pins = "gpb6-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV2>; }; pwm1_out: pwm1-out-pins { samsung,pins = "gpb6-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV2>; }; hs_i2c0_bus: hs-i2c0-bus-pins { samsung,pins = "gpb0-0", "gpb0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; hs_i2c1_bus: hs-i2c1-bus-pins { samsung,pins = "gpb0-2", "gpb0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; hs_i2c2_bus: hs-i2c2-bus-pins { samsung,pins = "gpb0-4", "gpb0-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; hs_i2c3_bus: hs-i2c3-bus-pins { samsung,pins = "gpb0-6", "gpb0-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; hs_i2c4_bus: hs-i2c4-bus-pins { samsung,pins = "gpb1-0", "gpb1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; hs_i2c5_bus: hs-i2c5-bus-pins { samsung,pins = "gpb1-2", "gpb1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; hs_i2c6_bus: hs-i2c6-bus-pins { samsung,pins = "gpb1-4", "gpb1-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; hs_i2c7_bus: hs-i2c7-bus-pins { samsung,pins = "gpb1-6", "gpb1-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; uart0_data: uart0-data-pins { samsung,pins = "gpb7-0", "gpb7-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_NONE>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; uart1_data: uart1-data-pins { samsung,pins = "gpb7-4", "gpb7-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_NONE>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; spi0_bus: spi0-bus-pins { samsung,pins = "gpb4-0", "gpb4-2", "gpb4-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; spi1_bus: spi1-bus-pins { samsung,pins = "gpb4-4", "gpb4-6", "gpb4-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; spi2_bus: spi2-bus-pins { samsung,pins = "gpb5-0", "gpb5-2", "gpb5-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; }; diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.h b/arch/arm64/boot/dts/tesla/fsd-pinctrl.h new file mode 100644 index 000000000000..6ffbda362493 --- /dev/null +++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Tesla FSD DTS pinctrl constants + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2022 Linaro Ltd + * Author: Krzysztof Kozlowski <krzk@kernel.org> + */ + +#ifndef __DTS_ARM64_TESLA_FSD_PINCTRL_H__ +#define __DTS_ARM64_TESLA_FSD_PINCTRL_H__ + +#define FSD_PIN_PULL_NONE 0 +#define FSD_PIN_PULL_DOWN 1 +#define FSD_PIN_PULL_UP 3 + +#define FSD_PIN_DRV_LV1 0 +#define FSD_PIN_DRV_LV2 2 +#define FSD_PIN_DRV_LV3 1 +#define FSD_PIN_DRV_LV4 3 + +#define FSD_PIN_FUNC_INPUT 0 +#define FSD_PIN_FUNC_OUTPUT 1 +#define FSD_PIN_FUNC_2 2 +#define FSD_PIN_FUNC_3 3 +#define FSD_PIN_FUNC_4 4 +#define FSD_PIN_FUNC_5 5 +#define FSD_PIN_FUNC_6 6 +#define FSD_PIN_FUNC_EINT 0xf +#define FSD_PIN_FUNC_F FSD_PIN_FUNC_EINT + +#endif /* __DTS_ARM64_TESLA_FSD_PINCTRL_H__ */ diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi index af39655331de..f35bc5a288c2 100644 --- a/arch/arm64/boot/dts/tesla/fsd.dtsi +++ b/arch/arm64/boot/dts/tesla/fsd.dtsi @@ -93,6 +93,13 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; cpucl0_1: cpu@1 { @@ -102,6 +109,13 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; cpucl0_2: cpu@2 { @@ -111,6 +125,13 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; cpucl0_3: cpu@3 { @@ -119,6 +140,13 @@ reg = <0x0 0x003>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; /* Cluster 1 */ @@ -129,6 +157,13 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; cpucl1_1: cpu@101 { @@ -138,6 +173,13 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; cpucl1_2: cpu@102 { @@ -147,6 +189,13 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; cpucl1_3: cpu@103 { @@ -156,6 +205,13 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; /* Cluster 2 */ @@ -166,6 +222,13 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; cpucl2_1: cpu@201 { @@ -175,6 +238,13 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; cpucl2_2: cpu@202 { @@ -184,6 +254,13 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; }; cpucl2_3: cpu@203 { @@ -193,6 +270,20 @@ enable-method = "psci"; clock-frequency = <2400000000>; cpu-idle-states = <&CPU_SLEEP>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&cpucl_l2>; + }; + + cpucl_l2: l2-cache0 { + compatible = "cache"; + cache-size = <0x400000>; + cache-line-size = <64>; + cache-sets = <4096>; }; idle-states { @@ -740,6 +831,35 @@ clocks = <&fin_pll>, <&clock_imem IMEM_MCT_PCLK>; clock-names = "fin_pll", "mct"; }; + + ufs: ufs@15120000 { + compatible = "tesla,fsd-ufs"; + reg = <0x0 0x15120000 0x0 0x200>, /* 0: HCI standard */ + <0x0 0x15121100 0x0 0x200>, /* 1: Vendor specified */ + <0x0 0x15110000 0x0 0x8000>, /* 2: UNIPRO */ + <0x0 0x15130000 0x0 0x100>; /* 3: UFS protector */ + reg-names = "hci", "vs_hci", "unipro", "ufsp"; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock_fsys0 UFS0_TOP0_HCLK_BUS>, + <&clock_fsys0 UFS0_TOP0_CLK_UNIPRO>; + clock-names = "core_clk", "sclk_unipro_main"; + freq-table-hz = <0 0>, <0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>; + phys = <&ufs_phy>; + phy-names = "ufs-phy"; + status = "disabled"; + }; + + ufs_phy: ufs-phy@15124000 { + compatible = "tesla,fsd-ufs-phy"; + reg = <0x0 0x15124000 0x0 0x800>; + reg-names = "phy-pma"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <0>; + clocks = <&clock_fsys0 UFS0_MPHY_REFCLK_IXTAL26>; + clock-names = "ref_clk"; + }; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index d08abad0bcf4..12ab7548dc77 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -144,8 +144,8 @@ compatible = "ti,k2g-sci"; ti,host-id = <12>; mbox-names = "rx", "tx"; - mboxes= <&secure_proxy_main 12>, - <&secure_proxy_main 13>; + mboxes = <&secure_proxy_main 12>, + <&secure_proxy_main 13>; reg-names = "debug_messages"; reg = <0x00 0x44043000 0x00 0xfe0>; @@ -165,6 +165,19 @@ }; }; + crypto: crypto@40900000 { + compatible = "ti,am62-sa3ul"; + reg = <0x00 0x40900000 0x00 0x1200>; + power-domains = <&k3_pds 70 TI_SCI_PD_SHARED>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>; + + dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>, + <&main_pktdma 0x7507 0>; + dma-names = "tx", "rx1", "rx2"; + }; + main_pmx0: pinctrl@f4000 { compatible = "pinctrl-single"; reg = <0x00 0xf4000 0x00 0x2ac>; diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts index 39fb1d763037..9b4dbae9d4aa 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts @@ -13,7 +13,7 @@ #include "k3-am625.dtsi" / { - compatible = "ti,am625-sk", "ti,am625"; + compatible = "ti,am625-sk", "ti,am625"; model = "Texas Instruments AM625 SK"; aliases { @@ -43,6 +43,15 @@ #size-cells = <2>; ranges; + ramoops@9ca00000 { + compatible = "ramoops"; + reg = <0x00 0x9ca00000 0x00 0x00100000>; + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x00>; + pmsg-size = <0x8000>; + }; + secure_tfa_ddr: tfa@9e780000 { reg = <0x00 0x9e780000 0x00 0x80000>; alignment = <0x1000>; diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index cdb530597c5e..ada00575f0f2 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -174,7 +174,7 @@ compatible = "ti,k2g-sci"; ti,host-id = <12>; mbox-names = "rx", "tx"; - mboxes= <&secure_proxy_main 12>, + mboxes = <&secure_proxy_main 12>, <&secure_proxy_main 13>; reg-names = "debug_messages"; reg = <0x00 0x44043000 0x00 0xfe0>; @@ -1301,7 +1301,7 @@ <0x00 0x20718000 0x00 0x8000>; reg-names = "m_can", "message_ram"; power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 99 5>, <&k3_clks 99 0>; + clocks = <&k3_clks 99 5>, <&k3_clks 99 0>; clock-names = "hclk", "cclk"; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts index 8e7893e58b03..ad150c704623 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -13,7 +13,7 @@ #include "k3-am642.dtsi" / { - compatible = "ti,am642-evm", "ti,am642"; + compatible = "ti,am642-evm", "ti,am642"; model = "Texas Instruments AM642 EVM"; chosen { diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index 59f506cbd275..2620469a7517 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -12,7 +12,7 @@ #include "k3-am642.dtsi" / { - compatible = "ti,am642-sk", "ti,am642"; + compatible = "ti,am642-sk", "ti,am642"; model = "Texas Instruments AM642 SK"; chosen { @@ -166,6 +166,15 @@ >; }; + main_uart0_pins_default: main-uart0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ + AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ + AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */ + AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */ + >; + }; + main_usb0_pins_default: main-usb0-pins-default { pinctrl-single,pins = < AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ @@ -268,6 +277,11 @@ status = "disabled"; }; +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; +}; + &main_uart1 { /* main_uart1 is reserved for firmware usage */ status = "reserved"; diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi index 6e41f2fa044a..32b797237581 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi @@ -425,7 +425,7 @@ psu: regulator@60 { compatible = "ti,tps62363"; - reg = <0x60>; + reg = <0x60>; regulator-name = "tps62363-vout"; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1500000>; @@ -574,7 +574,7 @@ pinctrl-0 = <&mcu_spi0_pins_default>; #address-cells = <1>; - #size-cells= <0>; + #size-cells = <0>; ti,pindir-d0-out-d1-in; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index e749343acced..8919fede3cd7 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -690,7 +690,7 @@ pcie0_rc: pcie@5500000 { compatible = "ti,am654-pcie-rc"; - reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>; + reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>; reg-names = "app", "dbics", "config", "atu"; power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; #address-cells = <3>; @@ -710,7 +710,7 @@ pcie0_ep: pcie-ep@5500000 { compatible = "ti,am654-pcie-ep"; - reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>; + reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>; reg-names = "app", "dbics", "addr_space", "atu"; power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; ti,syscon-pcie-mode = <&pcie0_mode>; @@ -723,7 +723,7 @@ pcie1_rc: pcie@5600000 { compatible = "ti,am654-pcie-rc"; - reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>; + reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>; reg-names = "app", "dbics", "config", "atu"; power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>; #address-cells = <3>; @@ -743,7 +743,7 @@ pcie1_ep: pcie-ep@5600000 { compatible = "ti,am654-pcie-ep"; - reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>; + reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>; reg-names = "app", "dbics", "addr_space", "atu"; power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>; ti,syscon-pcie-mode = <&pcie1_mode>; @@ -843,9 +843,9 @@ power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 67 1>, - <&k3_clks 216 1>, - <&k3_clks 67 2>; + clocks = <&k3_clks 67 1>, + <&k3_clks 216 1>, + <&k3_clks 67 2>; clock-names = "fck", "vp1", "vp2"; /* diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi index 9c69d0917f69..fa11d7142006 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -12,8 +12,8 @@ mbox-names = "rx", "tx"; - mboxes= <&secure_proxy_main 11>, - <&secure_proxy_main 13>; + mboxes = <&secure_proxy_main 11>, + <&secure_proxy_main 13>; reg-names = "debug_messages"; reg = <0x44083000 0x1000>; diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index 57497cb1ed68..5850582dd4ed 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -10,7 +10,7 @@ #include <dt-bindings/net/ti-dp83867.h> / { - compatible = "ti,am654-evm", "ti,am654"; + compatible = "ti,am654-evm", "ti,am654"; model = "Texas Instruments AM654 Base Board"; chosen { @@ -73,13 +73,13 @@ pinctrl-names = "default"; pinctrl-0 = <&push_button_pins_default>; - sw5 { + switch-5 { label = "GPIO Key USER1"; linux,code = <BTN_0>; gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>; }; - sw6 { + switch-6 { label = "GPIO Key USER2"; linux,code = <BTN_1>; gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>; @@ -330,7 +330,7 @@ pinctrl-names = "default"; pinctrl-0 = <&main_spi0_pins_default>; #address-cells = <1>; - #size-cells= <0>; + #size-cells = <0>; ti,pindir-d0-out-d1-in; flash@0 { diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index 1044ec6c4b0d..ff13bbeed30c 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -12,8 +12,8 @@ mbox-names = "rx", "tx"; - mboxes= <&secure_proxy_main 11>, - <&secure_proxy_main 13>; + mboxes = <&secure_proxy_main 11>, + <&secure_proxy_main 13>; reg-names = "debug_messages"; reg = <0x00 0x44083000 0x00 0x1000>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 2bc26a296496..b1691ac3442d 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -26,13 +26,13 @@ pinctrl-names = "default"; pinctrl-0 = <&sw10_button_pins_default &sw11_button_pins_default>; - sw10: sw10 { + sw10: switch-10 { label = "GPIO Key USER1"; linux,code = <BTN_0>; gpios = <&main_gpio0 0 GPIO_ACTIVE_LOW>; }; - sw11: sw11 { + sw11: switch-11 { label = "GPIO Key USER2"; linux,code = <BTN_1>; gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index b4972dfb7da8..df08724bbf1c 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -12,8 +12,8 @@ mbox-names = "rx", "tx"; - mboxes= <&secure_proxy_main 11>, - <&secure_proxy_main 13>; + mboxes = <&secure_proxy_main 11>, + <&secure_proxy_main 13>; reg-names = "debug_messages"; reg = <0x00 0x44083000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi index 19966f72c5b3..34e7d577ae13 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi @@ -320,7 +320,7 @@ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 98 7>, <&k3_clks 98 1>; - clock-names = "clk_ahb", "clk_xin"; + clock-names = "clk_ahb", "clk_xin"; assigned-clocks = <&k3_clks 98 1>; assigned-clock-parents = <&k3_clks 98 2>; bus-width = <8>; @@ -347,7 +347,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 99 8>, <&k3_clks 99 1>; - clock-names = "clk_ahb", "clk_xin"; + clock-names = "clk_ahb", "clk_xin"; assigned-clocks = <&k3_clks 99 1>; assigned-clock-parents = <&k3_clks 99 2>; bus-width = <4>; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi index 6c5c02edb375..4d1bfabd1313 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi @@ -12,8 +12,8 @@ mbox-names = "rx", "tx"; - mboxes= <&secure_proxy_main 11>, - <&secure_proxy_main 13>; + mboxes = <&secure_proxy_main 11>, + <&secure_proxy_main 13>; reg-names = "debug_messages"; reg = <0x00 0x44083000 0x00 0x1000>; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi index 8493dd7d5f1f..e172fa05c9a0 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi @@ -239,6 +239,10 @@ clocks = <&zynqmp_clk LPD_WDT>; }; +&xilinx_ams { + clocks = <&zynqmp_clk AMS_REF>; +}; + &zynqmp_dpdma { clocks = <&zynqmp_clk DPDMA_REF>; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts index 550b389153e6..20e83ca47b5d 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts @@ -52,7 +52,7 @@ gpio-keys { compatible = "gpio-keys"; autorepeat; - fwuen { + key-fwuen { label = "fwuen"; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; }; @@ -285,5 +285,5 @@ "", "", "", "", "", /* 155 - 159 */ "", "", "", "", "", /* 160 - 164 */ "", "", "", "", "", /* 165 - 169 */ - "", "", "", ""; /* 170 - 174 */ + "", "", "", ""; /* 170 - 173 */ }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index f6aad4159ccd..d61a297a2090 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -49,7 +49,7 @@ gpio-keys { compatible = "gpio-keys"; autorepeat; - sw4 { + switch-4 { label = "sw4"; gpios = <&gpio 23 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts index 7b9a88b125d1..5fd6b70a154a 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -47,7 +47,7 @@ gpio-keys { compatible = "gpio-keys"; autorepeat; - sw19 { + switch-19 { label = "sw19"; gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; linux,code = <KEY_DOWN>; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index 20b7c75bb1d3..e2dd72fe33ce 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -47,7 +47,7 @@ gpio-keys { compatible = "gpio-keys"; autorepeat; - sw19 { + switch-19 { label = "sw19"; gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; linux,code = <KEY_DOWN>; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts index e36df6adbeee..d685d8fbc36a 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -47,7 +47,7 @@ gpio-keys { compatible = "gpio-keys"; autorepeat; - sw19 { + switch-19 { label = "sw19"; gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; linux,code = <KEY_DOWN>; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index c715a18368c2..a549265e55f6 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -874,6 +874,32 @@ timeout-sec = <10>; }; + xilinx_ams: ams@ffa50000 { + compatible = "xlnx,zynqmp-ams"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 56 4>; + reg = <0x0 0xffa50000 0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + #io-channel-cells = <1>; + ranges = <0 0 0xffa50800 0x800>; + + ams_ps: ams_ps@0 { + compatible = "xlnx,zynqmp-ams-ps"; + status = "disabled"; + reg = <0x0 0x400>; + }; + + ams_pl: ams_pl@400 { + compatible = "xlnx,zynqmp-ams-pl"; + status = "disabled"; + reg = <0x400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + zynqmp_dpdma: dma-controller@fd4c0000 { compatible = "xlnx,zynqmp-dpdma"; status = "disabled"; |