Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

drivers/net/ethernet/mellanox/mlx5/core/main.c
  b33886971dbc ("net/mlx5: Initialize flow steering during driver probe")
  40379a0084c2 ("net/mlx5_fpga: Drop INNOVA TLS support")
  f2b41b32cde8 ("net/mlx5: Remove ipsec_ops function table")
https://lore.kernel.org/all/20220519040345.6yrjromcdistu7vh@sx1/
  16d42d313350 ("net/mlx5: Drain fw_reset when removing device")
  8324a02c342a ("net/mlx5: Add exit route when waiting for FW")
https://lore.kernel.org/all/20220519114119.060ce014@canb.auug.org.au/

tools/testing/selftests/net/mptcp/mptcp_join.sh
  e274f7154008 ("selftests: mptcp: add subflow limits test-cases")
  b6e074e171bc ("selftests: mptcp: add infinite map testcase")
  5ac1d2d63451 ("selftests: mptcp: Add tests for userspace PM type")
https://lore.kernel.org/all/20220516111918.366d747f@canb.auug.org.au/

net/mptcp/options.c
  ba2c89e0ea74 ("mptcp: fix checksum byte order")
  1e39e5a32ad7 ("mptcp: infinite mapping sending")
  ea66758c1795 ("tcp: allow MPTCP to update the announced window")
https://lore.kernel.org/all/20220519115146.751c3a37@canb.auug.org.au/

net/mptcp/pm.c
  95d686517884 ("mptcp: fix subflow accounting on close")
  4d25247d3ae4 ("mptcp: bypass in-kernel PM restrictions for non-kernel PMs")
https://lore.kernel.org/all/20220516111435.72f35dca@canb.auug.org.au/

net/mptcp/subflow.c
  ae66fb2ba6c3 ("mptcp: Do TCP fallback on early DSS checksum failure")
  0348c690ed37 ("mptcp: add the fallback check")
  f8d4bcacff3b ("mptcp: infinite mapping receiving")
https://lore.kernel.org/all/20220519115837.380bb8d4@canb.auug.org.au/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

3 files changed, 51 insertions, 5 deletions

diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index fb99cc2827c7..7ab3627cc347 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -622,6 +622,10 @@
 	status = "okay";
 };
 
+&rxmacro {
+	status = "okay";
+};
+
 &slpi {
 	status = "okay";
 	firmware-name = "qcom/sm8250/slpi.mbn";
@@ -773,6 +777,8 @@
 };
 
 &swr1 {
+	status = "okay";
+
 	wcd_rx: wcd9380-rx@0,4 {
 		compatible = "sdw20217010d00";
 		reg = <0 4>;
@@ -781,6 +787,8 @@
 };
 
 &swr2 {
+	status = "okay";
+
 	wcd_tx: wcd9380-tx@0,3 {
 		compatible = "sdw20217010d00";
 		reg = <0 3>;
@@ -819,6 +827,10 @@
 	};
 };
 
+&txmacro {
+	status = "okay";
+};
+
 &uart12 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index af8f22636436..1304b86af1a0 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2255,6 +2255,7 @@
 			pinctrl-0 = <&rx_swr_active>;
 			compatible = "qcom,sm8250-lpass-rx-macro";
 			reg = <0 0x3200000 0 0x1000>;
+			status = "disabled";
 
 			clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				<&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
@@ -2273,6 +2274,7 @@
 		swr1: soundwire-controller@3210000 {
 			reg = <0 0x3210000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
+			status = "disabled";
 			interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rxmacro>;
 			clock-names = "iface";
@@ -2300,6 +2302,7 @@
 			pinctrl-0 = <&tx_swr_active>;
 			compatible = "qcom,sm8250-lpass-tx-macro";
 			reg = <0 0x3220000 0 0x1000>;
+			status = "disabled";
 
 			clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
@@ -2323,6 +2326,7 @@
 			compatible = "qcom,soundwire-v1.5.1";
 			interrupts-extended = <&intc GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core";
+			status = "disabled";
 
 			clocks = <&txmacro>;
 			clock-names = "iface";
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index a01886b467ed..067fe4a6b178 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -16,6 +16,7 @@
 
 	aliases {
 		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
 		mmc0 = &sdmmc0;
 		mmc1 = &sdhci;
 	};
@@ -78,7 +79,6 @@
 	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
 	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
 	clock_in_out = "input";
-	phy-handle = <&rgmii_phy0>;
 	phy-mode = "rgmii";
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac0_miim
@@ -90,8 +90,38 @@
 	snps,reset-active-low;
 	/* Reset time is 20ms, 100ms for rtl8211f */
 	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x4f>;
+	rx_delay = <0x0f>;
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+	};
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_rgmii_bus>;
+
+	snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+
 	tx_delay = <0x3c>;
 	rx_delay = <0x2f>;
+
 	status = "okay";
 };
 
@@ -315,8 +345,8 @@
 	status = "disabled";
 };
 
-&mdio0 {
-	rgmii_phy0: ethernet-phy@0 {
+&mdio1 {
+	rgmii_phy1: ethernet-phy@0 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <0x0>;
 	};
@@ -345,9 +375,9 @@
 	pmuio2-supply = <&vcc3v3_pmu>;
 	vccio1-supply = <&vccio_acodec>;
 	vccio3-supply = <&vccio_sd>;
-	vccio4-supply = <&vcc_1v8>;
+	vccio4-supply = <&vcc_3v3>;
 	vccio5-supply = <&vcc_3v3>;
-	vccio6-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
 	vccio7-supply = <&vcc_3v3>;
 	status = "okay";
 };